diff options
Diffstat (limited to 'aclocal.m4')
| -rw-r--r-- | aclocal.m4 | 580 |
1 files changed, 580 insertions, 0 deletions
diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..cfc7281 --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,580 @@ +# aclocal.m4 generated automatically by aclocal 1.5 + +# Copyright 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. + +# serial 5 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# We require 2.13 because we rely on SHELL being computed by configure. +AC_PREREQ([2.13]) + +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED. +# The purpose of this macro is to provide the user with a means to +# check macros which are provided without letting her know how the +# information is coded. +# If this macro is not defined by Autoconf, define it here. +ifdef([AC_PROVIDE_IFELSE], + [], + [define([AC_PROVIDE_IFELSE], + [ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) + + +# AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE]) +# ---------------------------------------------- +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_REQUIRE([AC_PROG_INSTALL])dnl +# test to see if srcdir already configured +if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first]) +fi + +# Define the identity of the package. +PACKAGE=$1 +AC_SUBST(PACKAGE)dnl +VERSION=$2 +AC_SUBST(VERSION)dnl +ifelse([$3],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])]) + +# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow +# the ones we care about. +ifdef([m4_pattern_allow], + [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl + +# Autoconf 2.50 always computes EXEEXT. However we need to be +# compatible with 2.13, for now. So we always define EXEEXT, but we +# don't compute it. +AC_SUBST(EXEEXT) +# Similar for OBJEXT -- only we only use OBJEXT if the user actually +# requests that it be used. This is a bit dumb. +: ${OBJEXT=o} +AC_SUBST(OBJEXT) + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_MISSING_PROG(AMTAR, tar) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl +AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_PROVIDE_IFELSE([AC_PROG_][CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_][CC], + defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_][CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_][CXX], + defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl +]) + +# +# Check to make sure that the build environment is sane. +# + +# serial 3 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + + +# serial 2 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + am_backtick='`' + AC_MSG_WARN([${am_backtick}missing' script is too old or missing]) +fi +]) + +# AM_AUX_DIR_EXPAND + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], [ +# expand $ac_aux_dir to an absolute path +am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd` +]) + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"$am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# serial 4 -*- Autoconf -*- + + + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + + +# _AM_DEPENDENCIES(NAME) +# --------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX" or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'] + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + echo '#include "conftest.h"' > conftest.c + echo 'int i;' > conftest.h + echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=conftest.c object=conftest.o \ + depfile=conftest.Po tmpdepfile=conftest.TPo \ + $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && + grep conftest.h conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +$1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type" +AC_SUBST([$1DEPMODE]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[rm -f .deps 2>/dev/null +mkdir .deps 2>/dev/null +if test -d .deps; then + DEPDIR=.deps +else + # MS-DOS does not allow filenames that begin with a dot. + DEPDIR=_deps +fi +rmdir .deps 2>/dev/null +AC_SUBST(DEPDIR) +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking Speeds up one-time builds + --enable-dependency-tracking Do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +pushdef([subst], defn([AC_SUBST])) +subst(AMDEPBACKSLASH) +popdef([subst]) +]) + +# Generate code to set up dependency tracking. +# This macro should only be invoked once -- use via AC_REQUIRE. +# Usage: +# AM_OUTPUT_DEPENDENCY_COMMANDS + +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[ +AC_OUTPUT_COMMANDS([ +test x"$AMDEP_TRUE" != x"" || +for mf in $CONFIG_FILES; do + case "$mf" in + Makefile|GNUmakefile) dirpart=.;; + */Makefile|*/GNUmakefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;; + *) continue;; + esac + grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue + # Extract the definition of DEP_FILES from the Makefile without + # running `make'. + DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` + test -z "$DEPDIR" && continue + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n -e '/^U = / s///p' < "$mf"` + test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" + # We invoke sed twice because it is the simplest approach to + # changing $(DEPDIR) to its actual value in the expansion. + for file in `sed -n -e ' + /^DEP_FILES = .*\\\\$/ { + s/^DEP_FILES = // + :loop + s/\\\\$// + p + n + /\\\\$/ b loop + p + } + /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`echo "$file" | sed -e 's|/[^/]*$||'` + $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1 + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +], [AMDEP_TRUE="$AMDEP_TRUE" +ac_aux_dir="$ac_aux_dir"])]) + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +doit: + @echo done +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include='#' +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote='"' + _am_result=BSD + fi +fi +AC_SUBST(am__include) +AC_SUBST(am__quote) +AC_MSG_RESULT($_am_result) +rm -f confinc confmf +]) + +# serial 3 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +# +# FIXME: Once using 2.50, use this: +# m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_DEFUN([AM_CONDITIONAL], +[ifelse([$1], [TRUE], + [errprint(__file__:__line__: [$0: invalid condition: $1 +])dnl +m4exit(1)])dnl +ifelse([$1], [FALSE], + [errprint(__file__:__line__: [$0: invalid condition: $1 +])dnl +m4exit(1)])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN([AM_MAINTAINER_MODE], +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Like AC_CONFIG_HEADER, but automatically create stamp file. + +# serial 3 + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. We must strip everything past the first ":", +# and everything past the last "/". + +AC_PREREQ([2.12]) + +AC_DEFUN([AM_CONFIG_HEADER], +[ifdef([AC_FOREACH],dnl + [dnl init our file count if it isn't already + m4_ifndef([_AM_Config_Header_Index], m4_define([_AM_Config_Header_Index], [0])) + dnl prepare to store our destination file list for use in config.status + AC_FOREACH([_AM_File], [$1], + [m4_pushdef([_AM_Dest], m4_patsubst(_AM_File, [:.*])) + m4_define([_AM_Config_Header_Index], m4_incr(_AM_Config_Header_Index)) + dnl and add it to the list of files AC keeps track of, along + dnl with our hook + AC_CONFIG_HEADERS(_AM_File, +dnl COMMANDS, [, INIT-CMDS] +[# update the timestamp +echo timestamp >"AS_ESCAPE(_AM_DIRNAME(]_AM_Dest[))/stamp-h]_AM_Config_Header_Index[" +][$2]m4_ifval([$3], [, [$3]]))dnl AC_CONFIG_HEADERS + m4_popdef([_AM_Dest])])],dnl +[AC_CONFIG_HEADER([$1]) + AC_OUTPUT_COMMANDS( + ifelse(patsubst([$1], [[^ ]], []), + [], + [test -z "$CONFIG_HEADERS" || echo timestamp >dnl + patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]),dnl +[am_indx=1 +for am_file in $1; do + case " \$CONFIG_HEADERS " in + *" \$am_file "*) + am_dir=\`echo \$am_file |sed 's%:.*%%;s%[^/]*\$%%'\` + if test -n "\$am_dir"; then + am_tmpdir=\`echo \$am_dir |sed 's%^\(/*\).*\$%\1%'\` + for am_subdir in \`echo \$am_dir |sed 's%/% %'\`; do + am_tmpdir=\$am_tmpdir\$am_subdir/ + if test ! -d \$am_tmpdir; then + mkdir \$am_tmpdir + fi + done + fi + echo timestamp > "\$am_dir"stamp-h\$am_indx + ;; + esac + am_indx=\`expr \$am_indx + 1\` +done]) +])]) # AM_CONFIG_HEADER + +# _AM_DIRNAME(PATH) +# ----------------- +# Like AS_DIRNAME, only do it during macro expansion +AC_DEFUN([_AM_DIRNAME], + [m4_if(m4_regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1, + m4_if(m4_regexp([$1], [^//\([^/]\|$\)]), -1, + m4_if(m4_regexp([$1], [^/.*]), -1, + [.], + m4_patsubst([$1], [^\(/\).*], [\1])), + m4_patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])), + m4_patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl +]) # _AM_DIRNAME + |