stop using squid, only use squid3

5 files changed, 4 insertions, 4956 deletions

diff --git a/bin/maintenance.sh b/bin/maintenance.sh
index c123a9bd..700c9f33 100755
--- a/bin/maintenance.sh
+++ b/bin/maintenance.sh
@@ -144,7 +144,7 @@ general_maintenance() {
 	df -h 2>/dev/null || true
 
 	echo
-	for DIR in /var/cache/apt/archives/ /var/spool/squid/ /var/cache/pbuilder/build/ /var/lib/jenkins/jobs/ /chroots /schroots ; do
+	for DIR in /var/cache/apt/archives/ /var/spool/squid3/ /var/cache/pbuilder/build/ /var/lib/jenkins/jobs/ /chroots /schroots ; do
 		sudo du -shx $DIR 2>/dev/null
 	done
 	JOB_PREFIXES=$(ls -1 /var/lib/jenkins/jobs/|cut -d "_" -f1|sort -f -u)
diff --git a/etc/squid/squid.conf b/etc/squid/squid.conf
deleted file mode 100644
index 94870637..00000000
--- a/etc/squid/squid.conf
+++ /dev/null
@@ -1,4953 +0,0 @@
-
-#	WELCOME TO SQUID 2.7.STABLE9
-#	----------------------------
-#
-#	This is the default Squid configuration file. You may wish
-#	to look at the Squid home page (http://www.squid-cache.org/)
-#	for the FAQ and other documentation.
-#
-#	The default Squid config file shows what the defaults for
-#	various options happen to be.  If you don't need to change the
-#	default, you shouldn't uncomment the line.  Doing so may cause
-#	run-time problems.  In some cases "none" refers to no default
-#	setting at all, while in other cases it refers to a valid
-#	option - the comments for that keyword indicate if this is the
-#	case.
-#
-
-
-#  Configuration options can be included using the "include" directive.
-#  Include takes a list of files to include. Quoting and wildcards is
-#  supported.
-#
-#  For example,
-#
-#  include /path/to/included/file/squid.acl.config
-#
-#  Includes can be nested up to a hard-coded depth of 16 levels.
-#  This arbitrary restriction is to prevent recursive include references
-#  from causing Squid entering an infinite loop whilst trying to load
-#  configuration files.
-
-
-# OPTIONS FOR AUTHENTICATION
-# -----------------------------------------------------------------------------
-
-#  TAG: auth_param
-#	This is used to define parameters for the various authentication
-#	schemes supported by Squid.
-#
-#	format: auth_param scheme parameter [setting]
-#
-#	The order in which authentication schemes are presented to the client is
-#	dependent on the order the scheme first appears in config file. IE
-#	has a bug (it's not RFC 2617 compliant) in that it will use the basic
-#	scheme if basic is the first entry presented, even if more secure
-#	schemes are presented. For now use the order in the recommended
-#	settings section below. If other browsers have difficulties (don't
-#	recognize the schemes offered even if you are using basic) either
-#	put basic first, or disable the other schemes (by commenting out their
-#	program entry).
-#
-#	Once an authentication scheme is fully configured, it can only be
-#	shutdown by shutting squid down and restarting. Changes can be made on
-#	the fly and activated with a reconfigure. I.E. You can change to a
-#	different helper, but not unconfigure the helper completely.
-#
-#	Please note that while this directive defines how Squid processes
-#	authentication it does not automatically activate authentication.
-#	To use authentication you must in addition make use of ACLs based
-#	on login name in http_access (proxy_auth, proxy_auth_regex or
-#	external with %LOGIN used in the format tag). The browser will be
-#	challenged for authentication on the first such acl encountered
-#	in http_access processing and will also be re-challenged for new
-#	login credentials if the request is being denied by a proxy_auth
-#	type acl.
-#
-#	WARNING: authentication can't be used in a transparently intercepting
-#	proxy as the client then thinks it is talking to an origin server and
-#	not the proxy. This is a limitation of bending the TCP/IP protocol to
-#	transparently intercepting port 80, not a limitation in Squid.
-#
-#	=== Parameters for the basic scheme follow. ===
-#
-#	"program" cmdline
-#	Specify the command for the external authenticator.  Such a program
-#	reads a line containing "username password" and replies "OK" or
-#	"ERR" in an endless loop. "ERR" responses may optionally be followed
-#	by a error description available as %m in the returned error page.
-#
-#	By default, the basic authentication scheme is not used unless a
-#	program is specified.
-#
-#	If you want to use the traditional proxy authentication, jump over to
-#	the helpers/basic_auth/NCSA directory and type:
-#		% make
-#		% make install
-#
-#	Then, set this line to something like
-#
-#	auth_param basic program /usr/lib/squid/ncsa_auth /usr/etc/passwd
-#
-#	"children" numberofchildren
-#	The number of authenticator processes to spawn. If you start too few
-#	squid will have to wait for them to process a backlog of credential
-#	verifications, slowing it down. When credential verifications are
-#	done via a (slow) network you are likely to need lots of
-#	authenticator processes.
-#	auth_param basic children 5
-#
-#	"concurrency" numberofconcurrentrequests
-#	The number of concurrent requests/channels the helper supports.
-#	Changes the protocol used to include a channel number first on
-#	the request/response line, allowing multiple requests to be sent
-#	to the same helper in parallell without wating for the response.
-#	Must not be set unless it's known the helper supports this.
-#
-#	"realm" realmstring
-#	Specifies the realm name which is to be reported to the client for
-#	the basic proxy authentication scheme (part of the text the user
-#	will see when prompted their username and password).
-#	auth_param basic realm Squid proxy-caching web server
-#
-#	"credentialsttl" timetolive
-#	Specifies how long squid assumes an externally validated
-#	username:password pair is valid for - in other words how often the
-#	helper program is called for that user. Set this low to force
-#	revalidation with short lived passwords.  Note that setting this high
-#	does not impact your susceptibility to replay attacks unless you are
-#	using an one-time password system (such as SecureID). If you are using
-#	such a system, you will be vulnerable to replay attacks unless you
-#	also use the max_user_ip ACL in an http_access rule.
-#	auth_param basic credentialsttl 2 hours
-#
-#	"casesensitive" on|off
-#	Specifies if usernames are case sensitive. Most user databases are
-#	case insensitive allowing the same username to be spelled using both
-#	lower and upper case letters, but some are case sensitive. This
-#	makes a big difference for user_max_ip ACL processing and similar.
-#	auth_param basic casesensitive off
-#
-#	"blankpassword" on|off
-#	Specifies if blank passwords should be supported. Defaults to off
-#	as there is multiple authentication backends which handles blank
-#	passwords as "guest" access.
-#
-#	=== Parameters for the digest scheme follow ===
-#
-#	"program" cmdline
-#	Specify the command for the external authenticator.  Such a program
-#	reads a line containing "username":"realm" and replies with the
-#	appropriate H(A1) value hex encoded or ERR if the user (or his H(A1)
-#	hash) does not exists.  See RFC 2616 for the definition of H(A1).
-#	"ERR" responses may optionally be followed by a error description
-#	available as %m in the returned error page.
-#
-#	By default, the digest authentication scheme is not used unless a
-#	program is specified.
-#
-#	If you want to use a digest authenticator, jump over to the
-#	helpers/digest_auth/ directory and choose the authenticator to use.
-#	It it's directory type
-#		% make
-#		% make install
-#
-#	Then, set this line to something like
-#
-#	auth_param digest program /usr/lib/squid/digest_auth_pw /usr/etc/digpass
-#
-#	"children" numberofchildren
-#	The number of authenticator processes to spawn. If you start too few
-#	squid will have to wait for them to process a backlog of credential
-#	verifications, slowing it down. When credential verifications are
-#	done via a (slow) network you are likely to need lots of
-#	authenticator processes.
-#	auth_param digest children 5
-#
-#	"concurrency" numberofconcurrentrequests
-#	The number of concurrent requests/channels the helper supports.
-#	Changes the protocol used to include a channel number first on
-#	the request/response line, allowing multiple requests to be sent
-#	to the same helper in parallell without wating for the response.
-#	Must not be set unless it's known the helper supports this.
-#
-#	"realm" realmstring
-#	Specifies the realm name which is to be reported to the client for the
-#	digest proxy authentication scheme (part of the text the user will see
-#	when prompted their username and password).
-#	auth_param digest realm Squid proxy-caching web server
-#
-#	"nonce_garbage_interval" timeinterval
-#	Specifies the interval that nonces that have been issued to clients are
-#	checked for validity.
-#	auth_param digest nonce_garbage_interval 5 minutes
-#
-#	"nonce_max_duration" timeinterval
-#	Specifies the maximum length of time a given nonce will be valid for.
-#	auth_param digest nonce_max_duration 30 minutes
-#
-#	"nonce_max_count" number
-#	Specifies the maximum number of times a given nonce can be used.
-#	auth_param digest nonce_max_count 50
-#
-#	"nonce_strictness" on|off
-#	Determines if squid requires strict increment-by-1 behavior for nonce
-#	counts, or just incrementing (off - for use when useragents generate
-#	nonce counts that occasionally miss 1 (ie, 1,2,4,6)).
-#	auth_param digest nonce_strictness off
-#
-#	"check_nonce_count" on|off
-#	This directive if set to off can disable the nonce count check
-#	completely to work around buggy digest qop implementations in certain
-#	mainstream browser versions. Default on to check the nonce count to
-#	protect from authentication replay attacks.
-#	auth_param digest check_nonce_count on
-#
-#	"post_workaround" on|off
-#	This is a workaround to certain buggy browsers who sends an incorrect
-#	request digest in POST requests when reusing the same nonce as acquired
-#	earlier in response to a GET request.
-#	auth_param digest post_workaround off
-#
-#	=== NTLM scheme options follow ===
-#
-#	"program" cmdline
-#	Specify the command for the external NTLM authenticator. Such a
-#	program participates in the NTLMSSP exchanges between Squid and the
-#	client and reads commands according to the Squid NTLMSSP helper
-#	protocol. See helpers/ntlm_auth/ for details. Recommended ntlm
-#	authenticator is ntlm_auth from Samba-3.X, but a number of other
-#	ntlm authenticators is available.
-#
-#	By default, the ntlm authentication scheme is not used unless a
-#	program is specified.
-#
-#	auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp
-#
-#	"children" numberofchildren
-#	The number of authenticator processes to spawn. If you start too few
-#	squid will have to wait for them to process a backlog of credential
-#	verifications, slowing it down. When credential verifications are
-#	done via a (slow) network you are likely to need lots of
-#	authenticator processes.
-#	auth_param ntlm children 5
-#
-#	"keep_alive" on|off
-#	This option enables the use of keep-alive on the initial
-#	authentication request. It has been reported some versions of MSIE
-#	have problems if this is enabled, but performance will be increased
-#	if enabled.
-#
-#	auth_param ntlm keep_alive on
-#
-#	=== Negotiate scheme options follow ===
-#
-#	"program" cmdline
-#	Specify the command for the external Negotiate authenticator. Such a
-#	program participates in the SPNEGO exchanges between Squid and the
-#	client and reads commands according to the Squid ntlmssp helper
-#	protocol. See helpers/ntlm_auth/ for details. Recommended SPNEGO
-#	authenticator is ntlm_auth from Samba-4.X.
-#
-#	By default, the Negotiate authentication scheme is not used unless a
-#	program is specified.
-#
-#	auth_param negotiate program /path/to/samba/bin/ntlm_auth --helper-protocol=gss-spnego
-#
-#	"children" numberofchildren
-#	The number of authenticator processes to spawn. If you start too few
-#	squid will have to wait for them to process a backlog of credential
-#	verifications, slowing it down. When credential verifications are
-#	done via a (slow) network you are likely to need lots of
-#	authenticator processes.
-#	auth_param negotiate children 5
-#
-#	"keep_alive" on|off
-#	If you experience problems with PUT/POST requests when using the
-#	Negotiate authentication scheme then you can try setting this to
-#	off. This will cause Squid to forcibly close the connection on
-#	the initial requests where the browser asks which schemes are
-#	supported by the proxy.
-#
-#	auth_param negotiate keep_alive on
-#
-#Recommended minimum configuration per scheme:
-#auth_param negotiate program <uncomment and complete this line to activate>
-#auth_param negotiate children 5
-#auth_param negotiate keep_alive on
-#auth_param ntlm program <uncomment and complete this line to activate>
-#auth_param ntlm children 5
-#auth_param ntlm keep_alive on
-#auth_param digest program <uncomment and complete this line>
-#auth_param digest children 5
-#auth_param digest realm Squid proxy-caching web server
-#auth_param digest nonce_garbage_interval 5 minutes
-#auth_param digest nonce_max_duration 30 minutes
-#auth_param digest nonce_max_count 50
-#auth_param basic program <uncomment and complete this line>
-#auth_param basic children 5
-#auth_param basic realm Squid proxy-caching web server
-#auth_param basic credentialsttl 2 hours
-#auth_param basic casesensitive off
-
-#  TAG: authenticate_cache_garbage_interval
-#	The time period between garbage collection across the username cache.
-#	This is a tradeoff between memory utilization (long intervals - say
-#	2 days) and CPU (short intervals - say 1 minute). Only change if you
-#	have good reason to.
-#
-#Default:
-# authenticate_cache_garbage_interval 1 hour
-
-#  TAG: authenticate_ttl
-#	The time a user & their credentials stay in the logged in user cache
-#	since their last request. When the garbage interval passes, all user
-#	credentials that have passed their TTL are removed from memory.
-#
-#Default:
-# authenticate_ttl 1 hour
-
-#  TAG: authenticate_ip_ttl
-#	If you use proxy authentication and the 'max_user_ip' ACL, this
-#	directive controls how long Squid remembers the IP addresses
-#	associated with each user.  Use a small value (e.g., 60 seconds) if
-#	your users might change addresses quickly, as is the case with
-#	dialups. You might be safe using a larger value (e.g., 2 hours) in a
-#	corporate LAN environment with relatively static address assignments.
-#
-#Default:
-# authenticate_ip_ttl 0 seconds
-
-#  TAG: authenticate_ip_shortcircuit_ttl
-#	Cache authentication credentials per client IP address for this
-#	long. Default is 0 seconds (disabled).
-#
-#	See also authenticate_ip_shortcircuit_access directive.
-#
-#Default:
-# authenticate_ip_shortcircuit_ttl 0 seconds
-
-
-# ACCESS CONTROLS
-# -----------------------------------------------------------------------------
-
-#  TAG: external_acl_type
-#	This option defines external acl classes using a helper program to
-#	look up the status
-#
-#	  external_acl_type name [options] FORMAT.. /path/to/helper [helper arguments..]
-#
-#	Options:
-#
-#	  ttl=n		TTL in seconds for cached results (defaults to 3600
-#			for 1 hour)
-#	  negative_ttl=n
-#			TTL for cached negative lookups (default same
-#			as ttl)
-#	  children=n	number of processes spawn to service external acl
-#			lookups of this type. (default 5).
-#	  concurrency=n	concurrency level per process. Only used with helpers
-#	  		capable of processing more than one query at a time.
-#			Note: see compatibility note below
-#	  cache=n	result cache size, 0 is unbounded (default)
-#	  grace=	Percentage remaining of TTL where a refresh of a
-#			cached entry should be initiated without needing to
-#			wait for a new reply. (default 0 for no grace period)
-#	  protocol=2.5  Compatibility mode for Squid-2.5 external acl helpers
-#
-#	FORMAT specifications
-#
-#	  %LOGIN	Authenticated user login name
-#	  %EXT_USER	Username from external acl
-#	  %IDENT	Ident user name
-#	  %SRC		Client IP
-#	  %SRCPORT	Client source port
-#	  %URI		Requested URI
-#	  %DST		Requested host
-#	  %PROTO	Requested protocol
-#	  %PORT		Requested port
-#	  %METHOD	Request method
-#	  %MYADDR	Squid interface address
-#	  %MYPORT	Squid http_port number
-#	  %PATH		Requested URL-path (including query-string if any)
-#	  %USER_CERT	SSL User certificate in PEM format
-#	  %USER_CERTCHAIN SSL User certificate chain in PEM format
-#	  %USER_CERT_xx	SSL User certificate subject attribute xx
-#	  %USER_CA_xx	SSL User certificate issuer attribute xx
-#	  %{Header}	HTTP request header "Header"
-#	  %{Hdr:member}	HTTP request header "Hdr" list member "member"
-#	  %{Hdr:;member}
-#			HTTP request header list member using ; as
-#			list separator. ; can be any non-alphanumeric
-#			character.
-#	 %ACL		The ACL name
-#	 %DATA		The ACL arguments. If not used then any arguments
-#			is automatically added at the end
-#
-#	In addition to the above, any string specified in the referencing
-#	acl will also be included in the helper request line, after the
-#	specified formats (see the "acl external" directive)
-#
-#	The helper receives lines per the above format specification,
-#	and returns lines starting with OK or ERR indicating the validity
-#	of the request and optionally followed by additional keywords with
-#	more details.
-#
-#	General result syntax:
-#
-#	  OK/ERR keyword=value ...
-#
-#	Defined keywords:
-#
-#	  user=		The users name (login also understood)
-#	  password=	The users password (for PROXYPASS login= cache_peer)
-#	  message=	Error message or similar used as %o in error messages
-#			(error also understood)
-#	  log=		String to be logged in access.log. Available as
-#			%ea in logformat specifications
-#
-#	If protocol=3.0 (the default) then URL escaping is used to protect
-#	each value in both requests and responses.
-#
-#	If using protocol=2.5 then all values need to be enclosed in quotes
-#	if they may contain whitespace, or the whitespace escaped using \.
-#	And quotes or \ characters within the keyword value must be \ escaped.
-#
-#	When using the concurrency= option the protocol is changed by
-#	introducing a query channel tag infront of the request/response.
-#	The query channel tag is a number between 0 and concurrency-1.
-#
-#	Compatibility Note: The children= option was named concurrency= in
-#	Squid-2.5.STABLE3 and earlier, and was accepted as an alias for the
-#	duration of the Squid-2.5 releases to keep compatibility. However,
-#	the meaning of concurrency= option has changed in Squid-2.6 to match
-#	that of Squid-3 and the old syntax no longer works.
-#
-#Default:
-# none
-
-#  TAG: acl
-#	Defining an Access List
-#
-#    Every access list definition must begin with an aclname and acltype, 
-#    followed by either type-specific arguments or a quoted filename that
-#    they are read from.
-#
-#	acl aclname acltype argument ...
-#	acl aclname acltype "file" ...
-#
-#	when using "file", the file should contain one item per line.
-#
-#	By default, regular expressions are CASE-SENSITIVE.  To make
-#	them case-insensitive, use the -i option.
-#
-#	acl aclname src      ip-address/netmask ... (clients IP address)
-#	acl aclname src      addr1-addr2/netmask ... (range of addresses)
-#	acl aclname dst      ip-address/netmask ... (URL host's IP address)
-#	acl aclname myip     ip-address/netmask ... (local socket IP address)
-#
-#	acl aclname arp      mac-address ... (xx:xx:xx:xx:xx:xx notation)
-#	  # The arp ACL requires the special configure option --enable-arp-acl.
-#	  # Furthermore, the arp ACL code is not portable to all operating systems.
-#	  # It works on Linux, Solaris, FreeBSD and some other *BSD variants.
-#	  #
-#	  # NOTE: Squid can only determine the MAC address for clients that are on
-#	  # the same subnet. If the client is on a different subnet, then Squid cannot
-#	  # find out its MAC address.
-#
-#	acl aclname srcdomain   .foo.com ...    # reverse lookup, client IP
-#	acl aclname dstdomain   .foo.com ...    # Destination server from URL
-#	acl aclname srcdom_regex [-i] xxx ...   # regex matching client name
-#	acl aclname dstdom_regex [-i] xxx ...   # regex matching server
-#	  # For dstdomain and dstdom_regex a reverse lookup is tried if a IP
-#	  # based URL is used and no match is found. The name "none" is used
-#	  # if the reverse lookup fails.
-#
-#	acl aclname time     [day-abbrevs]  [h1:m1-h2:m2]
-#	    # day-abbrevs:
-#		# S - Sunday
-#		# M - Monday
-#		# T - Tuesday
-#		# W - Wednesday
-#		# H - Thursday
-#		# F - Friday
-#		# A - Saturday
-#	    # h1:m1 must be less than h2:m2
-#	acl aclname url_regex [-i] ^http:// ...	    # regex matching on whole URL
-#	acl aclname urlpath_regex [-i] \.gif$ ...	# regex matching on URL path
-#	acl aclname urllogin [-i] [^a-zA-Z0-9] ...	# regex matching on URL login field
-#	acl aclname port     80 70 21 ...
-#	acl aclname port     0-1024 ...		# ranges allowed
-#	acl aclname myport   3128 ...		# (local socket TCP port)
-#	acl aclname myportname 3128 ...		# http(s)_port name
-#	acl aclname proto    HTTP FTP ...
-#	acl aclname method   GET POST ...
-#	acl aclname browser  [-i] regexp ...
-#	  # pattern match on User-Agent header (see also req_header below)
-#	acl aclname referer_regex  [-i] regexp ...
-#	  # pattern match on Referer header
-#	  # Referer is highly unreliable, so use with care
-#	acl aclname ident    username ...
-#	acl aclname ident_regex [-i] pattern ...
-#	  # string match on ident output.
-#	  # use REQUIRED to accept any non-null ident.
-#	acl aclname src_as   number ...
-#	acl aclname dst_as   number ...
-#	  # Except for access control, AS numbers can be used for
-#	  # routing of requests to specific caches. Here's an
-#	  # example for routing all requests for AS#1241 and only
-#	  # those to mycache.mydomain.net:
-#	  # acl asexample dst_as 1241
-#	  # cache_peer_access mycache.mydomain.net allow asexample
-#	  # cache_peer_access mycache_mydomain.net deny all
-#
-#	acl aclname proxy_auth [-i] username ...
-#	acl aclname proxy_auth_regex [-i] pattern ...
-#	  # list of valid usernames
-#	  # use REQUIRED to accept any valid username.
-#	  #
-#	  # NOTE: when a Proxy-Authentication header is sent but it is not
-#	  # needed during ACL checking the username is NOT logged
-#	  # in access.log.
-#	  #
-#	  # NOTE: proxy_auth requires a EXTERNAL authentication program
-#	  # to check username/password combinations (see
-#	  # auth_param directive).
-#	  #
-#	  # NOTE: proxy_auth can't be used in a transparent proxy as
-#	  # the browser needs to be configured for using a proxy in order
-#	  # to respond to proxy authentication.
-#
-#	acl aclname snmp_community string ...
-#	  # A community string to limit access to your SNMP Agent
-#	  # Example:
-#	  #
-#	  #	acl snmppublic snmp_community public
-#
-#	acl aclname maxconn number
-#	  # This will be matched when the client's IP address has
-#	  # more than <number> HTTP connections established.
-#
-#	acl aclname max_user_ip [-s] number
-#	  # This will be matched when the user attempts to log in from more
-#	  # than <number> different ip addresses. The authenticate_ip_ttl
-#	  # parameter controls the timeout on the ip entries.
-#	  # If -s is specified the limit is strict, denying browsing
-#	  # from any further IP addresses until the ttl has expired. Without
-#	  # -s Squid will just annoy the user by "randomly" denying requests.
-#	  # (the counter is reset each time the limit is reached and a
-#	  # request is denied)
-#	  # NOTE: in acceleration mode or where there is mesh of child proxies,
-#	  # clients may appear to come from multiple addresses if they are
-#	  # going through proxy farms, so a limit of 1 may cause user problems.
-#
-#	acl aclname req_mime_type mime-type ...
-#	  # regex match against the mime type of the request generated
-#	  # by the client. Can be used to detect file upload or some
-#	  # types HTTP tunneling requests.
-#	  # NOTE: This does NOT match the reply. You cannot use this
-#	  # to match the returned file type.
-#
-#	acl aclname req_header header-name [-i] any\.regex\.here
-#	  # regex match against any of the known request headers.  May be
-#	  # thought of as a superset of "browser", "referer" and "mime-type"
-#	  # ACLs.
-#
-#	acl aclname rep_mime_type mime-type ...
-#	  # regex match against the mime type of the reply received by
-#	  # squid. Can be used to detect file download or some
-#	  # types HTTP tunneling requests.
-#	  # NOTE: This has no effect in http_access rules. It only has
-#	  # effect in rules that affect the reply data stream such as
-#	  # http_reply_access.
-#
-#	acl aclname rep_header header-name [-i] any\.regex\.here
-#	  # regex match against any of the known reply headers. May be
-#	  # thought of as a superset of "browser", "referer" and "mime-type"
-#	  # ACLs.
-#	  #
-#	  # Example:
-#	  #
-#	  # acl many_spaces rep_header Content-Disposition -i [[:space:]]{3,}
-#
-#	acl aclname external class_name [arguments...]
-#	  # external ACL lookup via a helper class defined by the
-#	  # external_acl_type directive.
-#
-#	acl aclname urlgroup group1 ...
-#	  # match against the urlgroup as indicated by redirectors
-#
-#	acl aclname user_cert attribute values...
-#	  # match against attributes in a user SSL certificate
-#	  # attribute is one of DN/C/O/CN/L/ST
-#
-#	acl aclname ca_cert attribute values...
-#	  # match against attributes a users issuing CA SSL certificate
-#	  # attribute is one of DN/C/O/CN/L/ST
-#
-#	acl aclname ext_user username ...
-#	acl aclname ext_user_regex [-i] pattern ...
-#	  # string match on username returned by external acl helper
-#	  # use REQUIRED to accept any non-null user name.
-#
-#Examples:
-#acl macaddress arp 09:00:2b:23:45:67
-#acl myexample dst_as 1241
-#acl password proxy_auth REQUIRED
-#acl fileupload req_mime_type -i ^multipart/form-data$
-#acl javascript rep_mime_type -i ^application/x-javascript$
-#
-#Recommended minimum configuration:
-acl all src all
-acl manager proto cache_object
-acl localhost src 127.0.0.1/32
-acl to_localhost dst 127.0.0.0/8 0.0.0.0/32
-#
-# Example rule allowing access from your local networks.
-# Adapt to list your (internal) IP networks from where browsing
-# should be allowed
-acl localnet src 10.0.0.0/8	# RFC1918 possible internal network
-acl localnet src 172.16.0.0/12	# RFC1918 possible internal network
-acl localnet src 192.168.0.0/16	# RFC1918 possible internal network
-#
-acl SSL_ports port 443		# https
-acl SSL_ports port 563		# snews
-acl SSL_ports port 873		# rsync
-acl Safe_ports port 80		# http
-acl Safe_ports port 21		# ftp
-acl Safe_ports port 443		# https
-acl Safe_ports port 70		# gopher
-acl Safe_ports port 210		# wais
-acl Safe_ports port 1025-65535	# unregistered ports
-acl Safe_ports port 280		# http-mgmt
-acl Safe_ports port 488		# gss-http
-acl Safe_ports port 591		# filemaker
-acl Safe_ports port 777		# multiling http
-acl Safe_ports port 631		# cups
-acl Safe_ports port 873		# rsync
-acl Safe_ports port 901		# SWAT
-acl purge method PURGE
-acl CONNECT method CONNECT
-
-#  TAG: http_access
-#	Allowing or Denying access based on defined access lists
-#
-#	Access to the HTTP port:
-#	http_access allow|deny [!]aclname ...
-#
-#	NOTE on default values:
-#
-#	If there are no "access" lines present, the default is to deny
-#	the request.
-#
-#	If none of the "access" lines cause a match, the default is the
-#	opposite of the last line in the list.  If the last line was
-#	deny, the default is allow.  Conversely, if the last line
-#	is allow, the default will be deny.  For these reasons, it is a
-#	good idea to have an "deny all" or "allow all" entry at the end
-#	of your access lists to avoid potential confusion.
-#
-#Default:
-# http_access deny all
-#
-#Recommended minimum configuration:
-#
-# Only allow cachemgr access from localhost
-http_access allow manager localhost
-http_access deny manager
-# Only allow purge requests from localhost
-http_access allow purge localhost
-http_access deny purge
-# Deny requests to unknown ports
-http_access deny !Safe_ports
-# Deny CONNECT to other than SSL ports
-http_access deny CONNECT !SSL_ports
-#
-# We strongly recommend the following be uncommented to protect innocent
-# web applications running on the proxy server who think the only
-# one who can access services on "localhost" is a local user
-#http_access deny to_localhost
-#
-# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
-
-# Example rule allowing access from your local networks.
-# Adapt localnet in the ACL section to list your (internal) IP networks
-# from where browsing should be allowed
-#http_access allow localnet
-http_access allow localhost
-
-# And finally deny all other access to this proxy
-http_access deny all
-
-#  TAG: http_access2
-#	Allowing or Denying access based on defined access lists
-#
-#	Identical to http_access, but runs after redirectors. If not set
-#	then only http_access is used.
-#
-#Default:
-# none
-
-#  TAG: http_reply_access
-#	Allow replies to client requests. This is complementary to http_access.
-#
-#	http_reply_access allow|deny [!] aclname ...
-#
-#	NOTE: if there are no access lines present, the default is to allow
-#	all replies
-#
-#	If none of the access lines cause a match the opposite of the
-#	last line will apply. Thus it is good practice to end the rules
-#	with an "allow all" or "deny all" entry.
-#
-#Default:
-# http_reply_access allow all
-
-#  TAG: icp_access
-#	Allowing or Denying access to the ICP port based on defined
-#	access lists
-#
-#	icp_access  allow|deny [!]aclname ...
-#
-#	See http_access for details
-#
-#Default:
-# icp_access deny all
-#
-#Allow ICP queries from local networks only
-icp_access allow localnet
-icp_access deny all
-
-#  TAG: htcp_access
-#	Allowing or Denying access to the HTCP port based on defined
-#	access lists
-#
-#	htcp_access  allow|deny [!]aclname ...
-#
-#	See http_access for details
-#
-#	NOTE: The default if no htcp_access lines are present is to
-#	deny all traffic. This default may cause problems with peers
-#	using the htcp or htcp-oldsquid options.
-#
-#Default:
-# htcp_access deny all
-#
-#Allow HTCP queries from local networks only
-# htcp_access allow localnet
-# htcp_access deny all
-
-#  TAG: htcp_clr_access
-#	Allowing or Denying access to purge content using HTCP based
-#	on defined access lists
-#
-#	htcp_clr_access  allow|deny [!]aclname ...
-#
-#	See http_access for details
-#
-##Allow HTCP CLR requests from trusted peers
-#acl htcp_clr_peer src 172.16.1.2
-#htcp_clr_access allow htcp_clr_peer
-#
-#Default:
-# htcp_clr_access deny all
-
-#  TAG: miss_access
-#	Use to force your neighbors to use you as a sibling instead of
-#	a parent.  For example:
-#
-#		acl localclients src 172.16.0.0/16
-#		miss_access allow localclients
-#		miss_access deny  !localclients
-#
-#	This means only your local clients are allowed to fetch
-#	MISSES and all other clients can only fetch HITS.
-#
-#	By default, allow all clients who passed the http_access rules
-#	to fetch MISSES from us.
-#
-#Default setting:
-# miss_access allow all
-
-#  TAG: ident_lookup_access
-#	A list of ACL elements which, if matched, cause an ident
-#	(RFC931) lookup to be performed for this request.  For
-#	example, you might choose to always perform ident lookups
-#	for your main multi-user Unix boxes, but not for your Macs
-#	and PCs.  By default, ident lookups are not performed for
-#	any requests.
-#
-#	To enable ident lookups for specific client addresses, you
-#	can follow this example:
-#
-#	acl ident_aware_hosts src 198.168.1.0/255.255.255.0
-#	ident_lookup_access allow ident_aware_hosts
-#	ident_lookup_access deny all
-#
-#	Only src type ACL checks are fully supported.  A src_domain
-#	ACL might work at times, but it will not always provide
-#	the correct result.
-#
-#Default:
-# ident_lookup_access deny all
-
-#  TAG: reply_body_max_size	bytes deny acl acl...
-#	This option specifies the maximum size of a reply body in bytes.
-#	It can be used to prevent users from downloading very large files,
-#	such as MP3's and movies. When the reply headers are received,
-#	the reply_body_max_size lines are processed, and the first line with
-#	a result of "deny" is used as the maximum body size for this reply.
-#	This size is checked twice. First when we get the reply headers,
-#	we check the content-length value.  If the content length value exists
-#	and is larger than the allowed size, the request is denied and the
-#	user receives an error message that says "the request or reply
-#	is too large." If there is no content-length, and the reply
-#	size exceeds this limit, the client's connection is just closed
-#	and they will receive a partial reply.
-#
-#	WARNING: downstream caches probably can not detect a partial reply
-#	if there is no content-length header, so they will cache
-#	partial responses and give them out as hits.  You should NOT
-#	use this option if you have downstream caches.
-#
-#	If you set this parameter to zero (the default), there will be
-#	no limit imposed.
-#
-#Default:
-# reply_body_max_size 0 allow all
-
-#  TAG: authenticate_ip_shortcircuit_access
-#	Access list determining when shortcicuiting the authentication process
-#	based on source IP cached credentials is acceptable. Use this to deny
-#	using the ip auth cache on requests from child proxies or other source
-#	ip's having multiple users.
-#
-#	See also authenticate_ip_shortcircuit_ttl directive
-#
-#Default:
-# none
-
-
-# OPTIONS FOR X-Forwarded-For
-# -----------------------------------------------------------------------------
-
-#  TAG: follow_x_forwarded_for
-#	Allowing or Denying the X-Forwarded-For header to be followed to
-#	find the original source of a request.
-#
-#	Requests may pass through a chain of several other proxies
-#	before reaching us.  The X-Forwarded-For header will contain a
-#	comma-separated list of the IP addresses in the chain, with the
-#	rightmost address being the most recent.
-#
-#	If a request reaches us from a source that is allowed by this
-#	configuration item, then we consult the X-Forwarded-For header
-#	to see where that host received the request from.  If the
-#	X-Forwarded-For header contains multiple addresses, and if
-#	acl_uses_indirect_client is on, then we continue backtracking
-#	until we reach an address for which we are not allowed to
-#	follow the X-Forwarded-For header, or until we reach the first
-#	address in the list.  (If acl_uses_indirect_client is off, then
-#	it's impossible to backtrack through more than one level of
-#	X-Forwarded-For addresses.)
-#
-#	The end result of this process is an IP address that we will
-#	refer to as the indirect client address.  This address may
-#	be treated as the client address for access control, delay
-#	pools and logging, depending on the acl_uses_indirect_client,
-#	delay_pool_uses_indirect_client and log_uses_indirect_client
-#	options.
-#
-#	SECURITY CONSIDERATIONS:
-#
-#		Any host for which we follow the X-Forwarded-For header
-#		can place incorrect information in the header, and Squid
-#		will use the incorrect information as if it were the
-#		source address of the request.  This may enable remote
-#		hosts to bypass any access control restrictions that are
-#		based on the client's source addresses.
-#
-#	For example:
-#
-#		acl localhost src 127.0.0.1
-#		acl my_other_proxy srcdomain .proxy.example.com
-#		follow_x_forwarded_for allow localhost
-#		follow_x_forwarded_for allow my_other_proxy
-#
-#Default:
-# follow_x_forwarded_for deny all
-
-#  TAG: acl_uses_indirect_client	on|off
-#	Controls whether the indirect client address
-#	(see follow_x_forwarded_for) is used instead of the
-#	direct client address in acl matching.
-#
-#Default:
-# acl_uses_indirect_client on
-
-#  TAG: delay_pool_uses_indirect_client	on|off
-#	Controls whether the indirect client address
-#	(see follow_x_forwarded_for) is used instead of the
-#	direct client address in delay pools.
-#
-#Default:
-# delay_pool_uses_indirect_client on
-
-#  TAG: log_uses_indirect_client	on|off
-#	Controls whether the indirect client address
-#	(see follow_x_forwarded_for) is used instead of the
-#	direct client address in the access log.
-#
-#Default:
-# log_uses_indirect_client on
-
-
-# SSL OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: ssl_unclean_shutdown
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	Some browsers (especially MSIE) bugs out on SSL shutdown
-#	messages.
-#
-#Default:
-# ssl_unclean_shutdown off
-
-#  TAG: ssl_engine
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	The OpenSSL engine to use. You will need to set this if you
-#	would like to use hardware SSL acceleration for example.
-#
-#Default:
-# none
-
-#  TAG: sslproxy_client_certificate
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	Client SSL Certificate to use when proxying https:// URLs
-#
-#Default:
-# none
-
-#  TAG: sslproxy_client_key
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	Client SSL Key to use when proxying https:// URLs
-#
-#Default:
-# none
-
-#  TAG: sslproxy_version
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	SSL version level to use when proxying https:// URLs
-#
-#Default:
-# sslproxy_version 1
-
-#  TAG: sslproxy_options
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	SSL engine options to use when proxying https:// URLs
-#
-#Default:
-# none
-
-#  TAG: sslproxy_cipher
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	SSL cipher list to use when proxying https:// URLs
-#
-#Default:
-# none
-
-#  TAG: sslproxy_cafile
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	file containing CA certificates to use when verifying server
-#	certificates while proxying https:// URLs
-#
-#Default:
-# none
-
-#  TAG: sslproxy_capath
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	directory containing CA certificates to use when verifying
-#	server certificates while proxying https:// URLs
-#
-#Default:
-# none
-
-#  TAG: sslproxy_flags
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	Various flags modifying the use of SSL while proxying https:// URLs:
-#	    DONT_VERIFY_PEER    Accept certificates even if they fail to
-#				verify.
-#	    NO_DEFAULT_CA       Don't use the default CA list built in
-#				to OpenSSL.
-#
-#Default:
-# none
-
-#  TAG: sslpassword_program
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	Specify a program used for entering SSL key passphrases
-#	when using encrypted SSL certificate keys. If not specified
-#	keys must either be unencrypted, or Squid started with the -N
-#	option to allow it to query interactively for the passphrase.
-#
-#Default:
-# none
-
-
-# NETWORK OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: http_port
-#	Usage:	port [options]
-#		hostname:port [options]
-#		1.2.3.4:port [options]
-#
-#	The socket addresses where Squid will listen for HTTP client
-#	requests.  You may specify multiple socket addresses.
-#	There are three forms: port alone, hostname with port, and
-#	IP address with port.  If you specify a hostname or IP
-#	address, Squid binds the socket to that specific
-#	address.  This replaces the old 'tcp_incoming_address'
-#	option.  Most likely, you do not need to bind to a specific
-#	address, so you can use the port number alone.
-#
-#	If you are running Squid in accelerator mode, you
-#	probably want to listen on port 80 also, or instead.
-#
-#	The -I command line option will override the *first* port
-#	specified here.
-#
-#	You may specify multiple socket addresses on multiple lines.
-#
-#	Options:
-#
-#	   transparent	Support for transparent interception of
-#			outgoing requests without browser settings.
-#
-#	   tproxy	Support Linux TPROXY for spoofing outgoing
-#			connections using the client IP address.
-#
-#	   accel	Accelerator mode. See also the related vhost,
-#			vport and defaultsite directives.
-#
-#	   defaultsite=domainname
-#			What to use for the Host: header if it is not present
-#			in a request. Determines what site (not origin server)
-#			accelerators should consider the default.
-#			Defaults to visible_hostname:port if not set
-#			May be combined with vport=NN to override the port number.
-#			Implies accel.
-#
-#	   vhost	Accelerator mode using Host header for virtual
-#			domain support. Implies accel.
-#
-#	   vport	Accelerator with IP based virtual host support.
-#			Implies accel.
-#
-#	   vport=NN	As above, but uses specified port number rather
-#			than the http_port number. Implies accel.
-#
-#	   allow-direct	Allow direct forwarding in accelerator mode. Normally
-#	   		accelerated requests is denied direct forwarding as it
-#			never_direct was used.
-#
-#	   urlgroup=	Default urlgroup to mark requests with (see
-#			also acl urlgroup and url_rewrite_program)
-#
-#	   protocol=	Protocol to reconstruct accelerated requests with.
-#			Defaults to http.
-#
-#	   no-connection-auth
-#			Prevent forwarding of Microsoft connection oriented
-#			authentication (NTLM, Negotiate and Kerberos)
-#
-#	   act-as-origin
-#	   		Act is if this Squid is the origin server.
-#			This currently means generate own Date: and
-#			Expires: headers. Implies accel.
-#
-#	   http11	Enables HTTP/1.1 support to clients. The HTTP/1.1
-#			support is still incomplete with an internal HTTP/1.0
-#			hop, but should work with most clients. The main
-#			HTTP/1.1 features missing due to this is forwarding
-#			of requests using chunked transfer encoding (results
-#			in 411) and forwarding of 1xx responses (silently
-#			dropped)
-#
-#	   name=	Specifies a internal name for the port. Defaults to
-#			the port specification (port or addr:port)
-#
-#	   tcpkeepalive[=idle,interval,timeout]
-#			Enable TCP keepalive probes of idle connections
-#			idle is the initial time before TCP starts probing
-#			the connection, interval how often to probe, and
-#			timeout the time before giving up.
-#
-#	If you run Squid on a dual-homed machine with an internal
-#	and an external interface we recommend you to specify the
-#	internal address:port in http_port. This way Squid will only be
-#	visible on the internal address.
-#
-# Squid normally listens to port 3128
-http_port 3128
-
-#  TAG: https_port
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-ssl option
-#
-#	Usage:  [ip:]port cert=certificate.pem [key=key.pem] [options...]
-#
-#	The socket address where Squid will listen for HTTPS client
-#	requests.
-#
-#	This is really only useful for situations where you are running
-#	squid in accelerator mode and you want to do the SSL work at the
-#	accelerator level.
-#
-#	You may specify multiple socket addresses on multiple lines,
-#	each with their own SSL certificate and/or options.
-#
-#	Options:
-#
-#	In addition to the options specified for http_port the folling
-#	SSL related options is supported:
-#
-#	   cert=	Path to SSL certificate (PEM format).
-#
-#	   key=		Path to SSL private key file (PEM format)
-#			if not specified, the certificate file is
-#			assumed to be a combined certificate and
-#			key file.
-#
-#	   version=	The version of SSL/TLS supported
-#			    1	automatic (default)
-#			    2	SSLv2 only
-#			    3	SSLv3 only
-#			    4	TLSv1 only
-#
-#	   cipher=	Colon separated list of supported ciphers.
-#
-#	   options=	Various SSL engine options. The most important
-#			being:
-#			    NO_SSLv2  Disallow the use of SSLv2
-#			    NO_SSLv3  Disallow the use of SSLv3
-#			    NO_TLSv1  Disallow the use of TLSv1
-#			    SINGLE_DH_USE Always create a new key when using
-#				      temporary/ephemeral DH key exchanges
-#			See src/ssl_support.c or OpenSSL SSL_CTX_set_options
-#			documentation for a complete list of options.
-#
-#	   clientca=	File containing the list of CAs to use when
-#			requesting a client certificate.
-#
-#	   cafile=	File containing additional CA certificates to
-#			use when verifying client certificates. If unset
-#			clientca will be used.
-#
-#	   capath=	Directory containing additional CA certificates
-#			and CRL lists to use when verifying client certificates.
-#
-#	   crlfile=	File of additional CRL lists to use when verifying
-#			the client certificate, in addition to CRLs stored in
-#			the capath. Implies VERIFY_CRL flag below.
-#
-#	   dhparams=	File containing DH parameters for temporary/ephemeral
-#			DH key exchanges.
-#
-#	   sslflags=	Various flags modifying the use of SSL:
-#			    DELAYED_AUTH
-#				Don't request client certificates
-#				immediately, but wait until acl processing
-#				requires a certificate (not yet implemented).
-#			    NO_DEFAULT_CA
-#				Don't use the default CA lists built in
-#				to OpenSSL.
-#			    NO_SESSION_REUSE
-#				Don't allow for session reuse. Each connection
-#				will result in a new SSL session.
-#			    VERIFY_CRL
-#				Verify CRL lists when accepting client
-#				certificates.
-#			    VERIFY_CRL_ALL
-#				Verify CRL lists for all certificates in the
-#				client certificate chain.
-#
-#	   sslcontext=	SSL session ID context identifier.
-#
-#
-#Default:
-# none
-
-#  TAG: tcp_outgoing_tos
-#	Allows you to select a TOS/Diffserv value to mark outgoing
-#	connections with, based on the username or source address
-#	making the request.
-#
-#	tcp_outgoing_tos ds-field [!]aclname ...
-#
-#	Example where normal_service_net uses the TOS value 0x00
-#	and good_service_net uses 0x20
-#
-#	acl normal_service_net src 10.0.0.0/255.255.255.0
-#	acl good_service_net src 10.0.1.0/255.255.255.0
-#	tcp_outgoing_tos 0x00 normal_service_net
-#	tcp_outgoing_tos 0x20 good_service_net
-#
-#	TOS/DSCP values really only have local significance - so you should
-#	know what you're specifying. For more information, see RFC2474 and
-#	RFC3260.
-#
-#	The TOS/DSCP byte must be exactly that - a octet value  0 - 255, or
-#	"default" to use whatever default your host has. Note that in
-#	practice often only values 0 - 63 is usable as the two highest bits
-#	have been redefined for use by ECN (RFC3168).
-#
-#	Processing proceeds in the order specified, and stops at first fully
-#	matching line.
-#
-#	Note: The use of this directive using client dependent ACLs is
-#	incompatible with the use of server side persistent connections. To
-#	ensure correct results it is best to set server_persisten_connections
-#	to off when using this directive in such configurations.
-#
-#Default:
-# none
-
-#  TAG: tcp_outgoing_address
-#	Allows you to map requests to different outgoing IP addresses
-#	based on the username or source address of the user making
-#	the request.
-#
-#	tcp_outgoing_address ipaddr [[!]aclname] ...
-#
-#	Example where requests from 10.0.0.0/24 will be forwarded
-#	with source address 10.1.0.1, 10.0.2.0/24 forwarded with
-#	source address 10.1.0.2 and the rest will be forwarded with
-#	source address 10.1.0.3.
-#
-#	acl normal_service_net src 10.0.0.0/24
-#	acl good_service_net src 10.0.1.0/24 10.0.2.0/24
-#	tcp_outgoing_address 10.1.0.1 normal_service_net
-#	tcp_outgoing_address 10.1.0.2 good_service_net
-#	tcp_outgoing_address 10.1.0.3
-#
-#	Processing proceeds in the order specified, and stops at first fully
-#	matching line.
-#
-#	Note: The use of this directive using client dependent ACLs is
-#	incompatible with the use of server side persistent connections. To
-#	ensure correct results it is best to set server_persistent_connections
-#	to off when using this directive in such configurations.
-#
-#Default:
-# none
-
-#  TAG: zph_mode
-#	This option enables packet level marking of HIT/MISS responses,
-#	either using IP TOS or socket priority.
-#	    off		Feature disabled
-#	    tos		Set the IP TOS/Diffserv field
-#	    priority	Set the socket priority (may get mapped to TOS by OS,
-#			otherwise only usable in local rulesets)
-#	    option	Embed the mark in an IP option field. See also
-#	    		zph_option.
-#
-#	See also tcp_outgoing_tos for details/requirements about TOS usage.
-#
-#Default:
-# zph_mode off
-
-#  TAG: zph_local
-#	Allows you to select a TOS/Diffserv/Priority value to mark local hits.
-#	Default: 0 (disabled).
-#
-#Default:
-# zph_local 0
-
-#  TAG: zph_sibling
-#	Allows you to select a TOS/Diffserv/Priority value to mark sibling hits.
-#	Default: 0 (disabled).
-#
-#Default:
-# zph_sibling 0
-
-#  TAG: zph_parent
-#	Allows you to select a TOS/Diffserv/Priority value to mark parent hits. 
-#	Default: 0 (disabled).
-#
-#Default:
-# zph_parent 0
-
-#  TAG: zph_option
-#	The IP option to use when zph_mode is set to "option". Defaults to
-#	136 which is officially registered as "SATNET Stream ID".
-#
-#Default:
-# zph_option 136
-
-
-# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM
-# -----------------------------------------------------------------------------
-
-#  TAG: cache_peer
-#	To specify other caches in a hierarchy, use the format:
-#
-#		cache_peer hostname type http-port icp-port [options]
-#
-#	For example,
-#
-#	#                                        proxy  icp
-#	#          hostname             type     port   port  options
-#	#          -------------------- -------- ----- -----  -----------
-#	cache_peer parent.foo.net       parent    3128  3130  proxy-only default
-#	cache_peer sib1.foo.net         sibling   3128  3130  proxy-only
-#	cache_peer sib2.foo.net         sibling   3128  3130  proxy-only
-#
-#	      type:  either 'parent', 'sibling', or 'multicast'.
-#
-#	proxy-port:  The port number where the cache listens for proxy
-#		     requests.
-#
-#	  icp-port:  Used for querying neighbor caches about
-#		     objects.  To have a non-ICP neighbor
-#		     specify '7' for the ICP port and make sure the
-#		     neighbor machine has the UDP echo port
-#		     enabled in its /etc/inetd.conf file.
-#		NOTE: Also requires icp_port option enabled to send/receive
-#		      requests via this method.
-#
-#	    options: proxy-only
-#		     weight=n
-#		     ttl=n
-#		     no-query
-#		     default
-#		     round-robin
-#		     carp
-#		     multicast-responder
-#		     multicast-siblings
-#		     closest-only
-#		     no-digest
-#		     no-netdb-exchange
-#		     no-delay
-#		     login=user:password | PASS | *:password
-#		     connect-timeout=nn
-#		     digest-url=url
-#		     allow-miss
-#		     max-conn=n
-#		     htcp
-#		     htcp-oldsquid
-#		     originserver
-#		     userhash
-#		     sourcehash
-#		     name=xxx
-#		     monitorurl=url
-#		     monitorsize=sizespec
-#		     monitorinterval=seconds
-#		     monitortimeout=seconds
-#		     forceddomain=name
-#		     ssl
-#		     sslcert=/path/to/ssl/certificate
-#		     sslkey=/path/to/ssl/key
-#		     sslversion=1|2|3|4
-#		     sslcipher=...
-#		     ssloptions=...
-#		     front-end-https[=on|auto]
-#		     connection-auth[=on|off|auto]
-#		     idle=n
-#		     http11
-#
-#		     use 'proxy-only' to specify objects fetched
-#		     from this cache should not be saved locally.
-#
-#		     use 'weight=n' to affect the selection of a peer
-#		     during any weighted peer-selection mechanisms.
-#		     The weight must be an integer; default is 1,
-#		     larger weights are favored more.
-#		     This option does not affect parent selection if a peering
-#		     protocol is not in use.
-#
-#		     use 'ttl=n' to specify a IP multicast TTL to use
-#		     when sending an ICP queries to this address.
-#		     Only useful when sending to a multicast group.
-#		     Because we don't accept ICP replies from random
-#		     hosts, you must configure other group members as
-#		     peers with the 'multicast-responder' option below.
-#
-#		     use 'no-query' to NOT send ICP queries to this
-#		     neighbor.
-#
-#		     use 'default' if this is a parent cache which can
-#		     be used as a "last-resort" if a peer cannot be located
-#		     by any of the peer-selection mechanisms.
-#		     If specified more than once, only the first is used.
-#
-#		     use 'round-robin' to define a set of parents which
-#		     should be used in a round-robin fashion in the
-#		     absence of any ICP queries.
-#
-#		     use 'carp' to define a set of parents which should
-#		     be used as a CARP array. The requests will be
-#		     distributed among the parents based on the CARP load
-#		     balancing hash function based on their weight.
-#
-#		     'multicast-responder' indicates the named peer
-#		     is a member of a multicast group.  ICP queries will
-#		     not be sent directly to the peer, but ICP replies
-#		     will be accepted from it.
-#
-#		     the 'multicast-siblings' option is meant to be used
-#		     only for cache peers of type "multicast". It instructs
-#		     Squid that ALL members of this multicast group have
-#		     "sibling" relationship with it, not "parent".  This is
-#		     an optimization that avoids useless multicast queries
-#		     to a multicast group when the requested object would
-#		     be fetched only from a "parent" cache, anyway.  It's
-#		     useful, e.g., when configuring a pool of redundant
-#		     Squid proxies, being members of the same
-#		     multicast group.
-#
-#		     'closest-only' indicates that, for ICP_OP_MISS
-#		     replies, we'll only forward CLOSEST_PARENT_MISSes
-#		     and never FIRST_PARENT_MISSes.
-#
-#		     use 'no-digest' to NOT request cache digests from
-#		     this neighbor.
-#
-#		     'no-netdb-exchange' disables requesting ICMP
-#		     RTT database (NetDB) from the neighbor.
-#
-#		     use 'no-delay' to prevent access to this neighbor
-#		     from influencing the delay pools.
-#
-#		     use 'login=user:password' if this is a personal/workgroup
-#		     proxy and your parent requires proxy authentication.
-#		     Note: The string can include URL escapes (i.e. %20 for
-#		     spaces). This also means % must be written as %%.
-#
-#		     use 'login=PASS' if users must authenticate against
-#		     the upstream proxy or in the case of a reverse proxy
-#		     configuration, the origin web server.  This will pass
-#		     the users credentials as they are to the peer.
-#		     Note: To combine this with local authentication the Basic
-#		     authentication scheme must be used, and both servers must
-#		     share the same user database as HTTP only allows for
-#		     a single login (one for proxy, one for origin server).
-#		     Also be warned this will expose your users proxy
-#		     password to the peer. USE WITH CAUTION
-#
-#		     use 'login=*:password' to pass the username to the
-#		     upstream cache, but with a fixed password. This is meant
-#		     to be used when the peer is in another administrative
-#		     domain, but it is still needed to identify each user.
-#		     The star can optionally be followed by some extra
-#		     information which is added to the username. This can
-#		     be used to identify this proxy to the peer, similar to
-#		     the login=username:password option above.
-#
-#		     use 'connect-timeout=nn' to specify a peer
-#		     specific connect timeout (also see the
-#		     peer_connect_timeout directive)
-#
-#		     use 'digest-url=url' to tell Squid to fetch the cache
-#		     digest (if digests are enabled) for this host from
-#		     the specified URL rather than the Squid default
-#		     location.
-#
-#		     use 'allow-miss' to disable Squid's use of only-if-cached
-#		     when forwarding requests to siblings. This is primarily
-#		     useful when icp_hit_stale is used by the sibling. To
-#		     extensive use of this option may result in forwarding
-#		     loops, and you should avoid having two-way peerings
-#		     with this option. (for example to deny peer usage on
-#		     requests from peer by denying cache_peer_access if the
-#		     source is a peer)
-#
-#		     use 'max-conn=n' to limit the amount of connections Squid
-#		     may open to this peer.
-#
-#		     use 'htcp' to send HTCP, instead of ICP, queries
-#		     to the neighbor.  You probably also want to
-#		     set the "icp port" to 4827 instead of 3130.
-#		     You must also allow this Squid htcp_access and
-#		     http_access in the peer Squid configuration.
-#
-#		     use 'htcp-oldsquid' to send HTCP to old Squid versions
-#		     You must also allow this Squid htcp_access and
-#		     http_access in the peer Squid configuration.
-#
-#		     'originserver' causes this parent peer to be contacted as
-#		     a origin server. Meant to be used in accelerator setups.
-#
-#		     use 'userhash' to load-balance amongst a set of parents
-#		     based on the client proxy_auth or ident username.
-#
-#		     use 'sourcehash' to load-balance amongst a set of parents
-#		     based on the client source ip.
-#
-#		     use 'name=xxx' if you have multiple peers on the same
-#		     host but different ports. This name can be used to
-#		     differentiate the peers in cache_peer_access and similar
-#		     directives.
-#
-#		     use 'monitorurl=url' to have periodically request a given
-#		     URL from the peer, and only consider the peer as alive
-#		     if this monitoring is successful (default none)
-#
-#		     use 'monitorsize=min[-max]' to limit the size range of
-#		     'monitorurl' replies considered valid. Defaults to 0 to
-#		     accept any size replies as valid.
-#
-#		     use 'monitorinterval=seconds' to change frequency of
-#		     how often the peer is monitored with 'monitorurl'
-#		     (default 300 for a 5 minute interval). If set to 0
-#		     then monitoring is disabled even if a URL is defined.
-#
-#		     use 'monitortimeout=seconds' to change the timeout of
-#		     'monitorurl'. Defaults to 'monitorinterval'.
-#
-#		     use 'forceddomain=name' to forcibly set the Host header
-#		     of requests forwarded to this peer. Useful in accelerator
-#		     setups where the server (peer) expects a certain domain
-#		     name and using redirectors to feed this domain name
-#		     is not feasible.
-#
-#		     use 'ssl' to indicate connections to this peer should
-#		     be SSL/TLS encrypted.
-#
-#		     use 'sslcert=/path/to/ssl/certificate' to specify a client
-#		     SSL certificate to use when connecting to this peer.
-#
-#		     use 'sslkey=/path/to/ssl/key' to specify the private SSL
-#		     key corresponding to sslcert above. If 'sslkey' is not
-#		     specified 'sslcert' is assumed to reference a
-#		     combined file containing both the certificate and the key.
-#
-#		     use sslversion=1|2|3|4 to specify the SSL version to use
-#		     when connecting to this peer
-#			1 = automatic (default)
-#			2 = SSL v2 only
-#			3 = SSL v3 only
-#			4 = TLS v1 only
-#
-#		     use sslcipher=... to specify the list of valid SSL ciphers
-#		     to use when connecting to this peer.
-#
-#		     use ssloptions=... to specify various SSL engine options:
-#			NO_SSLv2  Disallow the use of SSLv2
-#			NO_SSLv3  Disallow the use of SSLv3
-#			NO_TLSv1  Disallow the use of TLSv1
-#		     See src/ssl_support.c or the OpenSSL documentation for
-#		     a more complete list.
-#
-#		     use sslcafile=... to specify a file containing
-#		     additional CA certificates to use when verifying the
-#		     peer certificate.
-#
-#		     use sslcapath=... to specify a directory containing
-#		     additional CA certificates to use when verifying the
-#		     peer certificate.
-#
-#		     use sslcrlfile=... to specify a certificate revocation
-#		     list file to use when verifying the peer certificate.
-#
-#		     use sslflags=... to specify various flags modifying the
-#		     SSL implementation:
-#			DONT_VERIFY_PEER
-#				Accept certificates even if they fail to
-#				verify.
-#			NO_DEFAULT_CA
-#				Don't use the default CA list built in
-#				to OpenSSL.
-#
-#		     use ssldomain= to specify the peer name as advertised
-#		     in it's certificate. Used for verifying the correctness
-#		     of the received peer certificate. If not specified the
-#		     peer hostname will be used.
-#
-#		     use front-end-https to enable the "Front-End-Https: On"
-#		     header needed when using Squid as a SSL frontend in front
-#		     of Microsoft OWA. See MS KB document Q307347 for details
-#		     on this header. If set to auto the header will
-#		     only be added if the request is forwarded as a https://
-#		     URL.
-#
-#		     use connection-auth=off to tell Squid that this peer does
-#		     not support Microsoft connection oriented authentication,
-#		     and any such challenges received from there should be
-#		     ignored. Default is auto to automatically determine the
-#		     status of the peer.
-#
-#		     use idle=n to specify a minimum number of idle connections
-#		     that should be kept open to this peer.
-#
-#		     use http11 to send requests using HTTP/1.1 to this peer.
-#		     Note: The HTTP/1.1 support is still incomplete, with an
-#		     internal HTTP/1.0 hop. As result 1xx responses will not
-#		     be forwarded.
-#
-#Default:
-# none
-
-#  TAG: cache_peer_domain
-#	Use to limit the domains for which a neighbor cache will be
-#	queried.  Usage:
-#
-#	cache_peer_domain cache-host domain [domain ...]
-#	cache_peer_domain cache-host !domain
-#
-#	For example, specifying
-#
-#		cache_peer_domain parent.foo.net	.edu
-#
-#	has the effect such that UDP query packets are sent to
-#	'bigserver' only when the requested object exists on a
-#	server in the .edu domain.  Prefixing the domain name
-#	with '!' means the cache will be queried for objects
-#	NOT in that domain.
-#
-#	NOTE:	* Any number of domains may be given for a cache-host,
-#		  either on the same or separate lines.
-#		* When multiple domains are given for a particular
-#		  cache-host, the first matched domain is applied.
-#		* Cache hosts with no domain restrictions are queried
-#		  for all requests.
-#		* There are no defaults.
-#		* There is also a 'cache_peer_access' tag in the ACL
-#		  section.
-#
-#Default:
-# none
-
-#  TAG: cache_peer_access
-#	Similar to 'cache_peer_domain' but provides more flexibility by
-#	using ACL elements.
-#
-#	cache_peer_access cache-host allow|deny [!]aclname ...
-#
-#	The syntax is identical to 'http_access' and the other lists of
-#	ACL elements.  See the comments for 'http_access' below, or
-#	the Squid FAQ (http://www.squid-cache.org/FAQ/FAQ-10.html).
-#
-#Default:
-# none
-
-#  TAG: neighbor_type_domain
-#	usage: neighbor_type_domain neighbor parent|sibling domain domain ...
-#
-#	Modifying the neighbor type for specific domains is now
-#	possible.  You can treat some domains differently than the the
-#	default neighbor type specified on the 'cache_peer' line.
-#	Normally it should only be necessary to list domains which
-#	should be treated differently because the default neighbor type
-#	applies for hostnames which do not match domains listed here.
-#
-#EXAMPLE:
-#	cache_peer cache.foo.org parent 3128 3130
-#	neighbor_type_domain cache.foo.org sibling .com .net
-#	neighbor_type_domain cache.foo.org sibling .au .de
-#
-#Default:
-# none
-
-#  TAG: dead_peer_timeout	(seconds)
-#	This controls how long Squid waits to declare a peer cache
-#	as "dead."  If there are no ICP replies received in this
-#	amount of time, Squid will declare the peer dead and not
-#	expect to receive any further ICP replies.  However, it
-#	continues to send ICP queries, and will mark the peer as
-#	alive upon receipt of the first subsequent ICP reply.
-#
-#	This timeout also affects when Squid expects to receive ICP
-#	replies from peers.  If more than 'dead_peer' seconds have
-#	passed since the last ICP reply was received, Squid will not
-#	expect to receive an ICP reply on the next query.  Thus, if
-#	your time between requests is greater than this timeout, you
-#	will see a lot of requests sent DIRECT to origin servers
-#	instead of to your parents.
-#
-#Default:
-# dead_peer_timeout 10 seconds
-
-#  TAG: hierarchy_stoplist
-#	A list of words which, if found in a URL, cause the object to
-#	be handled directly by this cache.  In other words, use this
-#	to not query neighbor caches for certain objects.  You may
-#	list this option multiple times. Note: never_direct overrides
-#	this option.
-#We recommend you to use at least the following line.
-hierarchy_stoplist cgi-bin ?
-
-
-# MEMORY CACHE OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: cache_mem	(bytes)
-#	NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE.
-#	IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL
-#	USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER
-#	THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS.
-#
-#	'cache_mem' specifies the ideal amount of memory to be used
-#	for:
-#		* In-Transit objects
-#		* Hot Objects
-#		* Negative-Cached objects
-#
-#	Data for these objects are stored in 4 KB blocks.  This
-#	parameter specifies the ideal upper limit on the total size of
-#	4 KB blocks allocated.  In-Transit objects take the highest
-#	priority.
-#
-#	In-transit objects have priority over the others.  When
-#	additional space is needed for incoming data, negative-cached
-#	and hot objects will be released.  In other words, the
-#	negative-cached and hot objects will fill up any unused space
-#	not needed for in-transit objects.
-#
-#	If circumstances require, this limit will be exceeded.
-#	Specifically, if your incoming request rate requires more than
-#	'cache_mem' of memory to hold in-transit objects, Squid will
-#	exceed this limit to satisfy the new requests.  When the load
-#	decreases, blocks will be freed until the high-water mark is
-#	reached.  Thereafter, blocks will be used to store hot
-#	objects.
-#
-#Default:
-# cache_mem 8 MB
-
-#  TAG: maximum_object_size_in_memory	(bytes)
-#	Objects greater than this size will not be attempted to kept in
-#	the memory cache. This should be set high enough to keep objects
-#	accessed frequently in memory to improve performance whilst low
-#	enough to keep larger objects from hoarding cache_mem.
-#
-#Default:
-# maximum_object_size_in_memory 8 KB
-
-#  TAG: memory_replacement_policy
-#	The memory replacement policy parameter determines which
-#	objects are purged from memory when memory space is needed.
-#
-#	See cache_replacement_policy for details.
-#
-#Default:
-# memory_replacement_policy lru
-
-
-# DISK CACHE OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: cache_replacement_policy
-#	The cache replacement policy parameter determines which
-#	objects are evicted (replaced) when disk space is needed.
-#
-#	    lru       : Squid's original list based LRU policy
-#	    heap GDSF : Greedy-Dual Size Frequency
-#	    heap LFUDA: Least Frequently Used with Dynamic Aging
-#	    heap LRU  : LRU policy implemented using a heap
-#
-#	Applies to any cache_dir lines listed below this.
-#
-#	The LRU policies keeps recently referenced objects.
-#
-#	The heap GDSF policy optimizes object hit rate by keeping smaller
-#	popular objects in cache so it has a better chance of getting a
-#	hit.  It achieves a lower byte hit rate than LFUDA though since
-#	it evicts larger (possibly popular) objects.
-#
-#	The heap LFUDA policy keeps popular objects in cache regardless of
-#	their size and thus optimizes byte hit rate at the expense of
-#	hit rate since one large, popular object will prevent many
-#	smaller, slightly less popular objects from being cached.
-#
-#	Both policies utilize a dynamic aging mechanism that prevents
-#	cache pollution that can otherwise occur with frequency-based
-#	replacement policies.
-#
-#	NOTE: if using the LFUDA replacement policy you should increase
-#	the value of maximum_object_size above its default of 4096 KB to
-#	to maximize the potential byte hit rate improvement of LFUDA.
-#
-#	For more information about the GDSF and LFUDA cache replacement
-#	policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html
-#	and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html.
-#
-#Default:
-# cache_replacement_policy lru
-
-#  TAG: cache_dir
-#	Usage:
-#
-#	cache_dir Type Directory-Name Fs-specific-data [options]
-#
-#	You can specify multiple cache_dir lines to spread the
-#	cache among different disk partitions.
-#
-#	Type specifies the kind of storage system to use. Only "ufs"
-#	is built by default. To enable any of the other storage systems
-#	see the --enable-storeio configure option.
-#
-#	'Directory' is a top-level directory where cache swap
-#	files will be stored. If you want to use an entire disk
-#	for caching, this can be the mount-point directory.
-#	The directory must exist and be writable by the Squid
-#	process. Squid will NOT create this directory for you.
-#	Only using COSS, a raw disk device or a stripe file can
-#	be specified, but the configuration of the "cache_swap_log"
-#	tag is mandatory.
-#
-#	The ufs store type:
-#
-#	"ufs" is the old well-known Squid storage format that has always
-#	been there.
-#
-#	cache_dir ufs Directory-Name Mbytes L1 L2 [options]
-#
-#	'Mbytes' is the amount of disk space (MB) to use under this
-#	directory.  The default is 100 MB.  Change this to suit your
-#	configuration.  Do NOT put the size of your disk drive here.
-#	Instead, if you want Squid to use the entire disk drive,
-#	subtract 20% and use that value.
-#
-#	'Level-1' is the number of first-level subdirectories which
-#	will be created under the 'Directory'.  The default is 16.
-#
-#	'Level-2' is the number of second-level subdirectories which
-#	will be created under each first-level directory.  The default
-#	is 256.
-#
-#	The aufs store type:
-#
-#	"aufs" uses the same storage format as "ufs", utilizing
-#	POSIX-threads to avoid blocking the main Squid process on
-#	disk-I/O. This was formerly known in Squid as async-io.
-#
-#	cache_dir aufs Directory-Name Mbytes L1 L2 [options]
-#
-#	see argument descriptions under ufs above
-#
-#	The diskd store type:
-#
-#	"diskd" uses the same storage format as "ufs", utilizing a
-#	separate process to avoid blocking the main Squid process on
-#	disk-I/O.
-#
-#	cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n]
-#
-#	see argument descriptions under ufs above
-#
-#	Q1 specifies the number of unacknowledged I/O requests when Squid
-#	stops opening new files. If this many messages are in the queues,
-#	Squid won't open new files. Default is 64
-#
-#	Q2 specifies the number of unacknowledged messages when Squid
-#	starts blocking.  If this many messages are in the queues,
-#	Squid blocks until it receives some replies. Default is 72
-#
-#	When Q1 < Q2 (the default), the cache directory is optimized
-#	for lower response time at the expense of a decrease in hit
-#	ratio.  If Q1 > Q2, the cache directory is optimized for
-#	higher hit ratio at the expense of an increase in response
-#	time.
-#
-#	The coss store type:
-#
-#	block-size=n defines the "block size" for COSS cache_dir's.
-#	Squid uses file numbers as block numbers.  Since file numbers
-#	are limited to 24 bits, the block size determines the maximum
-#	size of the COSS partition.  The default is 512 bytes, which
-#	leads to a maximum cache_dir size of 512<<24, or 8 GB.  Note
-#	you should not change the COSS block size after Squid
-#	has written some objects to the cache_dir.
-#
-#	overwrite-percent=n defines the percentage of disk that COSS
-#	must write to before a given object will be moved to the
-#	current stripe.  A value of "n" closer to 100 will cause COSS
-#	to waste less disk space by having multiple copies of an object
-#	on disk, but will increase the chances of overwriting a popular
-#	object as COSS overwrites stripes.  A value of "n" close to 0
-#	will cause COSS to keep all current objects in the current COSS
-#	stripe at the expense of the hit rate.  The default value of 50
-#	will allow any given object to be stored on disk a maximum of
-#	2 times.
-#
-#	max-stripe-waste=n defines the maximum amount of space that COSS
-#	will waste in a given stripe (in bytes).  When COSS writes data
-#	to disk, it will potentially waste up to "max-size" worth of disk
-#	space for each 1MB of data written.  If "max-size" is set to a
-#	large value (ie >256k), this could potentially result in large
-#	amounts of wasted disk space. Setting this value to a lower value
-#	(ie 64k or 32k) will result in a COSS disk refusing to cache
-#	larger objects until the COSS stripe has been filled to within
-#	"max-stripe-waste" of the maximum size (1MB).
-#
-#	membufs=n defines the number of "memory-only" stripes that COSS
-#	will use.  When an cache hit is performed on a COSS stripe before
-#	COSS has reached the overwrite-percent value for that object,
-#	COSS will use a series of memory buffers to hold the object in
-#	while the data is sent to the client.  This will define the maximum
-#	number of memory-only buffers that COSS will use.  The default value
-#	is 10, which will use a maximum of 10MB of memory for buffers.
-#
-#	maxfullbufs=n defines the maximum number of stripes a COSS partition
-#	will have in memory waiting to be freed (either because the disk is
-#	under load and the stripe is unwritten, or because clients are still
-#	transferring data from objects using the memory).  In order to try
-#	and maintain a good hit rate under load, COSS will reserve the last
-#	2 full stripes for object hits. (ie a COSS cache_dir will reject
-#	new objects when the number of full stripes is 2 less than maxfullbufs)
-#
-#	The null store type:
-#
-#	no options are allowed or required
-#
-#	Common options:
-#
-#	no-store, no new objects should be stored to this cache_dir
-#
-#	min-size=n, refers to the min object size this storedir will accept.
-#	It's used to restrict a storedir to only store large objects
-#	(e.g. aufs) while other storedirs are optimized for smaller objects
-#	(e.g. COSS). Defaults to 0.
-#
-#	max-size=n, refers to the max object size this storedir supports.
-#	It is used to initially choose the storedir to dump the object.
-#	Note: To make optimal use of the max-size limits you should order
-#	the cache_dir lines with the smallest max-size value first and the
-#	ones with no max-size specification last.
-#
-#	Note that for coss, max-size must be less than COSS_MEMBUF_SZ
-#	(hard coded at 1 MB).
-#
-#Default:
-cache_dir ufs /var/spool/squid 16384 16 1024
-
-#  TAG: store_dir_select_algorithm
-#	Set this to 'round-robin' as an alternative.
-#
-#Default:
-# store_dir_select_algorithm least-load
-
-#  TAG: max_open_disk_fds
-#	To avoid having disk as the I/O bottleneck Squid can optionally
-#	bypass the on-disk cache if more than this amount of disk file
-#	descriptors are open.
-#
-#	A value of 0 indicates no limit.
-#
-#Default:
-# max_open_disk_fds 0
-
-#  TAG: minimum_object_size	(bytes)
-#	Objects smaller than this size will NOT be saved on disk.  The
-#	value is specified in kilobytes, and the default is 0 KB, which
-#	means there is no minimum.
-#
-#Default:
-# minimum_object_size 0 KB
-
-#  TAG: maximum_object_size	(bytes)
-#	Objects larger than this size will NOT be saved on disk.  The
-#	value is specified in kilobytes, and the default is 4MB.  If
-#	you wish to get a high BYTES hit ratio, you should probably
-#	increase this (one 32 MB object hit counts for 3200 10KB
-#	hits).  If you wish to increase speed more than your want to
-#	save bandwidth you should leave this low.
-#
-#	NOTE: if using the LFUDA replacement policy you should increase
-#	this value to maximize the byte hit rate improvement of LFUDA!
-#	See replacement_policy below for a discussion of this policy.
-#
-#	NOTE 2: In Debian the default is raised to 20MB allowing cache
-#	of Packages files in debian repositories. This makes squid a
-#	proper proxy for APT.
-#
-#Default:
-#NOTE 3: raised to 150 MB
-maximum_object_size 153600 KB
-
-#  TAG: cache_swap_low	(percent, 0-100)
-#  TAG: cache_swap_high	(percent, 0-100)
-#
-#	The low- and high-water marks for cache object replacement.
-#	Replacement begins when the swap (disk) usage is above the
-#	low-water mark and attempts to maintain utilization near the
-#	low-water mark.  As swap utilization gets close to high-water
-#	mark object eviction becomes more aggressive.  If utilization is
-#	close to the low-water mark less replacement is done each time.
-#
-#	Defaults are 90% and 95%. If you have a large cache, 5% could be
-#	hundreds of MB. If this is the case you may wish to set these
-#	numbers closer together.
-#
-#Default:
-# cache_swap_low 90
-# cache_swap_high 95
-
-#  TAG: update_headers	on|off
-#	By default Squid updates stored HTTP headers when receiving
-#	a 304 response. Set this to off if you want to disable this
-#	for disk I/O performance reasons. Disabling this VIOLATES the
-#	HTTP standard, and could make you liable for problems which it
-#	causes.
-#
-#Default:
-# update_headers on
-
-
-# LOGFILE OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: logformat
-#	Usage:
-#
-#	logformat <name> <format specification>
-#
-#	Defines an access log format.
-#
-#	The <format specification> is a string with embedded % format codes
-#
-#	% format codes all follow the same basic structure where all but
-#	the formatcode is optional. Output strings are automatically escaped
-#	as required according to their context and the output format
-#	modifiers are usually not needed, but can be specified if an explicit
-#	output format is desired.
-#
-#		% ["|[|'|#] [-] [[0]width] [{argument}] formatcode
-#
-#		"	output in quoted string format
-#		[	output in squid text log format as used by log_mime_hdrs
-#		#	output in URL quoted format
-#		'	output as-is
-#
-#		-	left aligned
-#		width	field width. If starting with 0 the
-#			output is zero padded
-#		{arg}	argument such as header name etc
-#
-#	Format codes:
-#
-#		>a	Client source IP address
-#		>A	Client FQDN
-#		>p	Client source port
-#		<A	Server IP address or peer name
-#		la	Local IP address (http_port)
-#		lp	Local port number (http_port)
-#		oa	Our outgoing IP address (tcp_outgoing_address)
-#		ts	Seconds since epoch
-#		tu	subsecond time (milliseconds)
-#		tl	Local time. Optional strftime format argument
-#			default %d/%b/%Y:%H:%M:%S %z
-#		tg	GMT time. Optional strftime format argument
-#			default %d/%b/%Y:%H:%M:%S %z
-#		tr	Response time (milliseconds)
-#		>h	Request header. Optional header name argument
-#			on the format header[:[separator]element]
-#		<h	Reply header. Optional header name argument
-#			as for >h
-#		un	User name
-#		ul	User name from authentication
-#		ui	User name from ident
-#		us	User name from SSL
-#		ue	User name from external acl helper
-#		Hs	HTTP status code
-#		Ss	Squid request status (TCP_MISS etc)
-#		Sh	Squid hierarchy status (DEFAULT_PARENT etc)
-#		mt	MIME content type
-#		rm	Request method (GET/POST etc)
-#		ru	Request URL
-#		rp	Request URL-Path excluding hostname
-#		rv	Request protocol version
-#		ea	Log string returned by external acl
-#		<st	Reply size including HTTP headers
-#		>st	Request size including HTTP headers
-#		st	Request+Reply size including HTTP headers
-#		sn	Unique sequence number per log line entry
-#		%	a literal % character
-#
-#	The default formats available (which do not need re-defining) are:
-#
-#logformat squid %ts.%03tu %6tr %>a %Ss/%03Hs %<st %rm %ru %un %Sh/%<A %mt
-#logformat squidmime %ts.%03tu %6tr %>a %Ss/%03Hs %<st %rm %ru %un %Sh/%<A %mt [%>h] [%<h]
-#logformat common %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %Hs %<st %Ss:%Sh
-#logformat combined %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %Hs %<st "%{Referer}>h" "%{User-Agent}>h" %Ss:%Sh
-#
-#Default:
-# none
-
-#  TAG: access_log
-#	These files log client request activities. Has a line every HTTP or
-#	ICP request. The format is:
-#	access_log <filepath> [<logformat name> [acl acl ...]]
-#	access_log none [acl acl ...]]
-#
-#	Will log to the specified file using the specified format (which
-#	must be defined in a logformat directive) those entries which match
-#	ALL the acl's specified (which must be defined in acl clauses).
-#	If no acl is specified, all requests will be logged to this file.
-#
-#	To disable logging of a request use the filepath "none", in which case
-#	a logformat name should not be specified.
-#
-#	To log the request via syslog specify a filepath of "syslog":
-#
-#	access_log syslog[:facility.priority] [format [acl1 [acl2 ....]]]
-#	where facility could be any of:
-#	authpriv, daemon, local0 .. local7 or user.
-#
-#	And priority could be any of:
-#	err, warning, notice, info, debug.
-access_log /var/log/squid/access.log squid
-
-#  TAG: log_access	allow|deny acl acl...
-#	This options allows you to control which requests gets logged
-#	to access.log (see access_log directive). Requests denied for
-#	logging will also not be accounted for in performance counters.
-#
-#Default:
-# none
-
-#  TAG: logfile_daemon
-#	Specify the path to the logfile-writing daemon. This daemon is
-#	used to write the access and store logs, if configured.
-#
-#Default:
-# logfile_daemon /usr/lib/squid/logfile-daemon
-
-#  TAG: cache_log
-#	Cache logging file. This is where general information about
-#	your cache's behavior goes. You can increase the amount of data
-#	logged to this file with the "debug_options" tag below.
-#
-#Default:
-# cache_log /var/log/squid/cache.log
-
-#  TAG: cache_store_log
-#	Logs the activities of the storage manager.  Shows which
-#	objects are ejected from the cache, and which objects are
-#	saved and for how long.  To disable, enter "none". There are
-#	not really utilities to analyze this data, so you can safely
-#	disable it.
-#
-#Default:
-# cache_store_log /var/log/squid/store.log
-
-#  TAG: cache_swap_state
-#	Location for the cache "swap.state" file. This index file holds
-#	the metadata of objects saved on disk.  It is used to rebuild
-#	the cache during startup.  Normally this file resides in each
-#	'cache_dir' directory, but you may specify an alternate
-#	pathname here.  Note you must give a full filename, not just
-#	a directory. Since this is the index for the whole object
-#	list you CANNOT periodically rotate it!
-#
-#	If %s can be used in the file name it will be replaced with a
-#	a representation of the cache_dir name where each / is replaced
-#	with '.'. This is needed to allow adding/removing cache_dir
-#	lines when cache_swap_log is being used.
-#
-#	If have more than one 'cache_dir', and %s is not used in the name
-#	these swap logs will have names such as:
-#
-#		cache_swap_log.00
-#		cache_swap_log.01
-#		cache_swap_log.02
-#
-#	The numbered extension (which is added automatically)
-#	corresponds to the order of the 'cache_dir' lines in this
-#	configuration file.  If you change the order of the 'cache_dir'
-#	lines in this file, these index files will NOT correspond to
-#	the correct 'cache_dir' entry (unless you manually rename
-#	them).  We recommend you do NOT use this option.  It is
-#	better to keep these index files in each 'cache_dir' directory.
-#
-#Default:
-# none
-
-#  TAG: logfile_rotate
-#	Specifies the number of logfile rotations to make when you
-#	type 'squid -k rotate'.  The default is 10, which will rotate
-#	with extensions 0 through 9.  Setting logfile_rotate to 0 will
-#	disable the file name rotation, but the logfiles are still closed
-#	and re-opened.  This will enable you to rename the logfiles
-#	yourself just before sending the rotate signal.
-#
-#	Note, the 'squid -k rotate' command normally sends a USR1
-#	signal to the running squid process.  In certain situations
-#	(e.g. on Linux with Async I/O), USR1 is used for other
-#	purposes, so -k rotate uses another signal.  It is best to get
-#	in the habit of using 'squid -k rotate' instead of 'kill -USR1
-#	<pid>'.
-#
-#	Note2, for Debian/Linux the default of logfile_rotate is
-#	zero, since it includes external logfile-rotation methods.
-#
-#Default:
-# logfile_rotate 0
-
-#  TAG: emulate_httpd_log	on|off
-#	The Cache can emulate the log file format which many 'httpd'
-#	programs use.  To disable/enable this emulation, set
-#	emulate_httpd_log to 'off' or 'on'.  The default
-#	is to use the native log format since it includes useful
-#	information Squid-specific log analyzers use.
-#
-#Default:
-# emulate_httpd_log off
-
-#  TAG: log_ip_on_direct	on|off
-#	Log the destination IP address in the hierarchy log tag when going
-#	direct. Earlier Squid versions logged the hostname here. If you
-#	prefer the old way set this to off.
-#
-#Default:
-# log_ip_on_direct on
-
-#  TAG: mime_table
-#	Pathname to Squid's MIME table. You shouldn't need to change
-#	this, but the default file contains examples and formatting
-#	information if you do.
-#
-#Default:
-# mime_table /usr/share/squid/mime.conf
-
-#  TAG: log_mime_hdrs	on|off
-#	The Cache can record both the request and the response MIME
-#	headers for each HTTP transaction.  The headers are encoded
-#	safely and will appear as two bracketed fields at the end of
-#	the access log (for either the native or httpd-emulated log
-#	formats).  To enable this logging set log_mime_hdrs to 'on'.
-#
-#Default:
-# log_mime_hdrs off
-
-#  TAG: useragent_log
-#	Squid will write the User-Agent field from HTTP requests
-#	to the filename specified here.  By default useragent_log
-#	is disabled.
-#
-#Default:
-# none
-
-#  TAG: referer_log
-#	Squid will write the Referer field from HTTP requests to the
-#	filename specified here.  By default referer_log is disabled.
-#	Note that "referer" is actually a misspelling of "referrer"
-#	however the misspelt version has been accepted into the HTTP RFCs
-#	and we accept both.
-#
-#Default:
-# none
-
-#  TAG: pid_filename
-#	A filename to write the process-id to.  To disable, enter "none".
-#
-#Default:
-# pid_filename /var/run/squid.pid
-
-#  TAG: debug_options
-#	Logging options are set as section,level where each source file
-#	is assigned a unique section.  Lower levels result in less
-#	output,  Full debugging (level 9) can result in a very large
-#	log file, so be careful.  The magic word "ALL" sets debugging
-#	levels for all sections.  We recommend normally running with
-#	"ALL,1".
-#
-#Default:
-# debug_options ALL,1
-
-#  TAG: log_fqdn	on|off
-#	Turn this on if you wish to log fully qualified domain names
-#	in the access.log. To do this Squid does a DNS lookup of all
-#	IP's connecting to it. This can (in some situations) increase
-#	latency, which makes your cache seem slower for interactive
-#	browsing.
-#
-#Default:
-# log_fqdn off
-
-#  TAG: client_netmask
-#	A netmask for client addresses in logfiles and cachemgr output.
-#	Change this to protect the privacy of your cache clients.
-#	A netmask of 255.255.255.0 will log all IP's in that range with
-#	the last digit set to '0'.
-#
-#Default:
-# client_netmask 255.255.255.255
-
-#  TAG: forward_log
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-forward-log option
-#
-#	Logs the server-side requests.
-#
-#	This is currently work in progress.
-#
-#Default:
-# none
-
-#  TAG: strip_query_terms
-#	By default, Squid strips query terms from requested URLs before
-#	logging.  This protects your user's privacy.
-#
-#Default:
-# strip_query_terms on
-
-#  TAG: buffered_logs	on|off
-#	cache.log log file is written with stdio functions, and as such
-#	it can be buffered or unbuffered. By default it will be unbuffered.
-#	Buffering it can speed up the writing slightly (though you are
-#	unlikely to need to worry unless you run with tons of debugging
-#	enabled in which case performance will suffer badly anyway..).
-#
-#Default:
-# buffered_logs off
-
-#  TAG: netdb_filename
-#	A filename where Squid stores it's netdb state between restarts.
-#	To disable, enter "none".
-#
-#Default:
-# netdb_filename /var/spool/squid/logs/netdb.state
-
-
-# OPTIONS FOR FTP GATEWAYING
-# -----------------------------------------------------------------------------
-
-#  TAG: ftp_user
-#	If you want the anonymous login password to be more informative
-#	(and enable the use of picky ftp servers), set this to something
-#	reasonable for your domain, like wwwuser@somewhere.net
-#
-#	The reason why this is domainless by default is the
-#	request can be made on the behalf of a user in any domain,
-#	depending on how the cache is used.
-#	Some ftp server also validate the email address is valid
-#	(for example perl.com).
-#
-#Default:
-# ftp_user Squid@
-
-#  TAG: ftp_list_width
-#	Sets the width of ftp listings. This should be set to fit in
-#	the width of a standard browser. Setting this too small
-#	can cut off long filenames when browsing ftp sites.
-#
-#Default:
-# ftp_list_width 32
-
-#  TAG: ftp_passive
-#	If your firewall does not allow Squid to use passive
-#	connections, turn off this option.
-#
-#Default:
-# ftp_passive on
-
-#  TAG: ftp_sanitycheck
-#	For security and data integrity reasons Squid by default performs
-#	sanity checks of the addresses of FTP data connections ensure the
-#	data connection is to the requested server. If you need to allow
-#	FTP connections to servers using another IP address for the data
-#	connection turn this off.
-#
-#Default:
-# ftp_sanitycheck on
-
-#  TAG: ftp_telnet_protocol
-#	The FTP protocol is officially defined to use the telnet protocol
-#	as transport channel for the control connection. However, many
-#	implementations are broken and does not respect this aspect of
-#	the FTP protocol.
-#
-#	If you have trouble accessing files with ASCII code 255 in the
-#	path or similar problems involving this ASCII code you can
-#	try setting this directive to off. If that helps, report to the
-#	operator of the FTP server in question that their FTP server
-#	is broken and does not follow the FTP standard.
-#
-#Default:
-# ftp_telnet_protocol on
-
-
-# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
-# -----------------------------------------------------------------------------
-
-#  TAG: diskd_program
-#	Specify the location of the diskd executable.
-#	Note this is only useful if you have compiled in
-#	diskd as one of the store io modules.
-#
-#Default:
-# diskd_program /usr/lib/squid/diskd-daemon
-
-#  TAG: unlinkd_program
-#	Specify the location of the executable for file deletion process.
-#
-#Default:
-# unlinkd_program /usr/lib/squid/unlinkd
-
-#  TAG: pinger_program
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-icmp option
-#
-#	Specify the location of the executable for the pinger process.
-#
-#Default:
-# pinger_program /usr/lib/squid/pinger
-
-
-# OPTIONS FOR URL REWRITING
-# -----------------------------------------------------------------------------
-
-#  TAG: storeurl_rewrite_program
-#	Specify the location of the executable for the Store URL rewriter.
-#	The Store URL rewriter allows URLs to be "normalised" ; mapping
-#	multiple URLs to a single URL representation for cache operations.
-#
-#	For example, if you request an object at:
-#
-#	http://srv1.example.com/image.gif
-#
-#	and a subsequent request for:
-#
-#	http://srv2.example.com/image.gif
-#
-#	then Squid will treat these both as different URLs and cache them
-#	seperately.
-#
-#	This is almost the normal case, but an increasing number of sites
-#	distribute the same content between multiple frontend hosts.
-#	The Store URL rewriter allows you to rewrite these URLs to one URL
-#	to use for cache operations, but not -fetches-. Fetches are still
-#	made from the original site, but stored with the store URL rewritten
-#	URL as the store key.
-#
-#	For each requested URL rewriter will receive on line with the format
-#
-#	URL <SP> client_ip "/" fqdn <SP> user <SP> method <SP> urlgroup
-#	 [<SP> kvpairs] <NL>
-#
-#	In the future, the rewriter interface will be extended with
-#	key=value pairs ("kvpairs" shown above).  Rewriter programs
-#	should be prepared to receive and possibly ignore additional
-#	whitespace-separated tokens on each input line.
-#
-#	And the rewriter may return a rewritten URL. The other components of
-#	the request line does not need to be returned (ignored if they are).
-#
-#	By default, a Store URL rewriter is not used.
-#
-#	Please note - the normal URL rewriter rewrites Squid's _destination_
-#	URL - ie, what it fetches. The Store URL rewriter rewrites Squid's
-#	_store_ URL - ie, what it uses to store and retrieve objects.
-#
-#Default:
-# none
-
-#  TAG: storeurl_rewrite_children
-#
-#
-#Default:
-# storeurl_rewrite_children 5
-
-#  TAG: storeurl_rewrite_concurrency
-#
-#
-#Default:
-# storeurl_rewrite_concurrency 0
-
-#  TAG: url_rewrite_program
-#	Specify the location of the executable for the URL rewriter.
-#	Since they can perform almost any function there isn't one included.
-#
-#	For each requested URL rewriter will receive on line with the format
-#
-#	URL <SP> client_ip "/" fqdn <SP> user <SP> method <SP> urlgroup
-#	 [<SP> kvpairs] <NL>
-#
-#	In the future, the rewriter interface will be extended with
-#	key=value pairs ("kvpairs" shown above).  Rewriter programs
-#	should be prepared to receive and possibly ignore additional
-#	whitespace-separated tokens on each input line.
-#
-#	And the rewriter may return a rewritten URL. The other components of
-#	the request line does not need to be returned (ignored if they are).
-#
-#	The rewriter can also indicate that a client-side redirect should
-#	be performed to the new URL. This is done by prefixing the returned
-#	URL with "301:" (moved permanently) or 302: (moved temporarily).
-#
-#	It can also return a "urlgroup" that can subsequently be matched
-#	in cache_peer_access and similar ACL driven rules. An urlgroup is
-#	returned by prefixing the returned URL with "!urlgroup!".
-#
-#	By default, a URL rewriter is not used.
-#
-#Default:
-# none
-
-#  TAG: url_rewrite_children
-#	The number of redirector processes to spawn. If you start
-#	too few Squid will have to wait for them to process a backlog of
-#	URLs, slowing it down. If you start too many they will use RAM
-#	and other system resources.
-#
-#Default:
-# url_rewrite_children 5
-
-#  TAG: url_rewrite_concurrency
-#	The number of requests each redirector helper can handle in
-#	parallel. Defaults to 0 which indicates the redirector
-#	is a old-style single threaded redirector.
-#
-#	When this directive is set to a value >= 1 then the protocol
-#	used to communicate with the helper is modified to include
-#	a request ID in front of the request/response. The request
-#	ID from the request must be echoed back with the response
-#	to that request.
-#
-#Default:
-# url_rewrite_concurrency 0
-
-#  TAG: url_rewrite_host_header
-#	By default Squid rewrites any Host: header in redirected
-#	requests.  If you are running an accelerator this may
-#	not be a wanted effect of a redirector.
-#
-#	WARNING: Entries are cached on the result of the URL rewriting
-#	process, so be careful if you have domain-virtual hosts.
-#
-#Default:
-# url_rewrite_host_header on
-
-#  TAG: url_rewrite_access
-#	If defined, this access list specifies which requests are
-#	sent to the redirector processes.  By default all requests
-#	are sent.
-#
-#Default:
-# none
-
-#  TAG: storeurl_access
-#
-#
-#Default:
-# none
-
-#  TAG: redirector_bypass
-#	When this is 'on', a request will not go through the
-#	redirector if all redirectors are busy.  If this is 'off'
-#	and the redirector queue grows too large, Squid will exit
-#	with a FATAL error and ask you to increase the number of
-#	redirectors.  You should only enable this if the redirectors
-#	are not critical to your caching system.  If you use
-#	redirectors for access control, and you enable this option,
-#	users may have access to pages they should not
-#	be allowed to request.
-#
-#Default:
-# redirector_bypass off
-
-#  TAG: location_rewrite_program
-#	Specify the location of the executable for the Location rewriter,
-#	used to rewrite server generated redirects. Usually used in
-#	conjunction with a url_rewrite_program
-#
-#	For each Location header received the location rewriter will receive
-#	one line with the format:
-#
-#	   location URL <SP> requested URL <SP> urlgroup <NL>
-#
-#	And the rewriter may return a rewritten Location URL or a blank line.
-#	The other components of the request line does not need to be returned
-#	(ignored if they are).
-#
-#	By default, a Location rewriter is not used.
-#
-#Default:
-# none
-
-#  TAG: location_rewrite_children
-#	The number of location rewriting processes to spawn. If you start
-#	too few Squid will have to wait for them to process a backlog of
-#	URLs, slowing it down. If you start too many they will use RAM
-#	and other system resources.
-#
-#Default:
-# location_rewrite_children 5
-
-#  TAG: location_rewrite_concurrency
-#	The number of requests each Location rewriter helper can handle in
-#	parallel. Defaults to 0 which indicates that the helper
-#	is a old-style singlethreaded helper.
-#
-#Default:
-# location_rewrite_concurrency 0
-
-#  TAG: location_rewrite_access
-#	If defined, this access list specifies which requests are
-#	sent to the location rewriting processes.  By default all Location
-#	headers are sent.
-#
-#Default:
-# none
-
-
-# OPTIONS FOR TUNING THE CACHE
-# -----------------------------------------------------------------------------
-
-#  TAG: cache
-#	A list of ACL elements which, if matched, cause the request to
-#	not be satisfied from the cache and the reply to not be cached.
-#	In other words, use this to force certain objects to never be cached.
-#
-#	You must use the word 'DENY' to indicate the ACL names which should
-#	NOT be cached.
-#
-#	Default is to allow all to be cached.
-#
-#Default:
-# none
-
-#  TAG: max_stale	time-units
-#	This option puts an upper limit on how stale content Squid
-#	will serve from the cache if cache validation fails.
-#
-#Default:
-# max_stale 1 week
-
-#  TAG: refresh_pattern
-#	usage: refresh_pattern [-i] regex min percent max [options]
-#
-#	By default, regular expressions are CASE-SENSITIVE.  To make
-#	them case-insensitive, use the -i option.
-#
-#	'Min' is the time (in minutes) an object without an explicit
-#	expiry time should be considered fresh. The recommended
-#	value is 0, any higher values may cause dynamic applications
-#	to be erroneously cached unless the application designer
-#	has taken the appropriate actions.
-#
-#	'Percent' is a percentage of the objects age (time since last
-#	modification age) an object without explicit expiry time
-#	will be considered fresh.
-#
-#	'Max' is an upper limit on how long objects without an explicit
-#	expiry time will be considered fresh.
-#
-#	options: override-expire
-#		 override-lastmod
-#		 reload-into-ims
-#		 ignore-reload
-#		 ignore-no-cache
-#		 ignore-private
-#		 ignore-auth
-#		 stale-while-revalidate=NN
-#		 ignore-stale-while-revalidate
-#		 max-stale=NN
-#		 negative-ttl=NN
-#
-#		override-expire enforces min age even if the server
-#		sent an explicit expiry time (e.g., with the
-#		Expires: header or Cache-Control: max-age). Doing this
-#		VIOLATES the HTTP standard.  Enabling this feature
-#		could make you liable for problems which it causes.
-#
-#		Note: this does not enforce staleness - it only extends
-#		freshness / min. If the server returns a Expires time which
-#		is longer than your max time, Squid will still consider
-#		the object fresh for that period of time.
-#
-#		override-lastmod enforces min age even on objects
-#		that were modified recently.
-#
-#		reload-into-ims changes client no-cache or ``reload''
-#		to If-Modified-Since requests. Doing this VIOLATES the
-#		HTTP standard. Enabling this feature could make you
-#		liable for problems which it causes.
-#
-#		ignore-reload ignores a client no-cache or ``reload''
-#		header. Doing this VIOLATES the HTTP standard. Enabling
-#		this feature could make you liable for problems which
-#		it causes.
-#
-#		ignore-no-cache ignores any ``Pragma: no-cache'' and
-#		``Cache-control: no-cache'' headers received from a server.
-#		The HTTP RFC never allows the use of this (Pragma) header
-#		from a server, only a client, though plenty of servers
-#		send it anyway.
-#
-#		ignore-private ignores any ``Cache-control: private''
-#		headers received from a server. Doing this VIOLATES
-#		the HTTP standard. Enabling this feature could make you
-#		liable for problems which it causes.
-#
-#		ignore-auth caches responses to requests with authorization,
-#		as if the originserver had sent ``Cache-control: public''
-#		in the response header. Doing this VIOLATES the HTTP standard.
-#		Enabling this feature could make you liable for problems which
-#		it causes.
-#
-#		stale-while-revalidate=NN makes Squid perform an asyncronous
-#		cache validation if the object isn't more stale than NN.
-#		Doing this VIOLATES the HTTP standard. Enabling this
-#		feature could make you liable for problems which it
-#		causes.
-#
-#		ignore-stale-while-revalidate makes Squid ignore any 'Cache-Control:
-#		stale-while-revalidate=NN' headers received from a server. Can be
-#		combined with stale-while-revalidate=NN to override the server provided
-#		value.
-#
-#		max-stale=NN provided a maximum staleness factor. Squid won't
-#		serve objects more stale than this even if it failed to
-#		validate the object.
-#
-#		negative-ttl=NN overrides the global negative_ttl parameter
-#		selectively for URLs matching this pattern (in seconds).
-#
-#	Basically a cached object is:
-#
-#		FRESH if expires < now, else STALE
-#		STALE if age > max
-#		FRESH if lm-factor < percent, else STALE
-#		FRESH if age < min
-#		else STALE
-#
-#	The refresh_pattern lines are checked in the order listed here.
-#	The first entry which matches is used.  If none of the entries
-#	match the default will be used.
-#
-#	Note, you must uncomment all the default lines if you want
-#	to change one. The default setting is only active if none is
-#	used.
-#
-#Suggested default:
-refresh_pattern ^ftp:		1440	20%	10080
-refresh_pattern ^gopher:	1440	0%	1440
-refresh_pattern -i (/cgi-bin/|\?) 0	0%	0
-refresh_pattern /(|In)Release(|\.gpg)$	0	0%	0
-refresh_pattern /(Packages|Sources)(|\.gz|\.bz2|\.xz)$	0	0%	0
-refresh_pattern \.deb$   129600 100% 129600
-refresh_pattern \.udeb$   129600 100% 129600
-refresh_pattern \.tar\.(gz|bz2|xz|lzma)$  129600 100% 129600
-refresh_pattern .		0	20%	4320
-
-#  TAG: quick_abort_min	(KB)
-#  TAG: quick_abort_max	(KB)
-#  TAG: quick_abort_pct	(percent)
-#	The cache by default continues downloading aborted requests
-#	which are almost completed (less than 16 KB remaining). This
-#	may be undesirable on slow (e.g. SLIP) links and/or very busy
-#	caches.  Impatient users may tie up file descriptors and
-#	bandwidth by repeatedly requesting and immediately aborting
-#	downloads.
-#
-#	When the user aborts a request, Squid will check the
-#	quick_abort values to the amount of data transfered until
-#	then.
-#
-#	If the transfer has less than 'quick_abort_min' KB remaining,
-#	it will finish the retrieval.
-#
-#	If the transfer has more than 'quick_abort_max' KB remaining,
-#	it will abort the retrieval.
-#
-#	If more than 'quick_abort_pct' of the transfer has completed,
-#	it will finish the retrieval.
-#
-#	If you do not want any retrieval to continue after the client
-#	has aborted, set both 'quick_abort_min' and 'quick_abort_max'
-#	to '0 KB'.
-#
-#	If you want retrievals to always continue if they are being
-#	cached set 'quick_abort_min' to '-1 KB'.
-#
-#Default:
-# quick_abort_min 16 KB
-# quick_abort_max 16 KB
-# quick_abort_pct 95
-
-#  TAG: read_ahead_gap	buffer-size
-#	The amount of data the cache will buffer ahead of what has been
-#	sent to the client when retrieving an object from another server.
-#
-#Default:
-# read_ahead_gap 16 KB
-
-#  TAG: negative_ttl	time-units
-#	Time-to-Live (TTL) for failed requests.  Certain types of
-#	failures (such as "connection refused" and "404 Not Found") are
-#	negatively-cached for a configurable amount of time.  The
-#	default is 5 minutes.  Note that this is different from
-#	negative caching of DNS lookups.
-#
-#Default:
-# negative_ttl 5 minutes
-
-#  TAG: positive_dns_ttl	time-units
-#	Upper limit on how long Squid will cache positive DNS responses.
-#	Default is 6 hours (360 minutes). This directive must be set
-#	larger than negative_dns_ttl.
-#
-#Default:
-# positive_dns_ttl 6 hours
-
-#  TAG: negative_dns_ttl	time-units
-#	Time-to-Live (TTL) for negative caching of failed DNS lookups.
-#	This also sets the lower cache limit on positive lookups.
-#	Minimum value is 1 second, and it is not recommendable to go
-#	much below 10 seconds.
-#
-#Default:
-# negative_dns_ttl 1 minute
-
-#  TAG: range_offset_limit	(bytes)
-#	Sets a upper limit on how far into the the file a Range request
-#	may be to cause Squid to prefetch the whole file. If beyond this
-#	limit Squid forwards the Range request as it is and the result
-#	is NOT cached.
-#
-#	This is to stop a far ahead range request (lets say start at 17MB)
-#	from making Squid fetch the whole object up to that point before
-#	sending anything to the client.
-#
-#	A value of -1 causes Squid to always fetch the object from the
-#	beginning so it may cache the result. (2.0 style)
-#
-#	A value of 0 causes Squid to never fetch more than the
-#	client requested. (default)
-#
-#Default:
-# range_offset_limit 0 KB
-
-#  TAG: minimum_expiry_time	(seconds)
-#	The minimum caching time according to (Expires - Date)
-#	Headers Squid honors if the object can't be revalidated
-#	defaults to 60 seconds. In reverse proxy enorinments it
-#	might be desirable to honor shorter object lifetimes. It
-#	is most likely better to make your server return a
-#	meaningful Last-Modified header however.
-#
-#Default:
-# minimum_expiry_time 60 seconds
-
-#  TAG: store_avg_object_size	(kbytes)
-#	Average object size, used to estimate number of objects your
-#	cache can hold.  The default is 13 KB.
-#
-#Default:
-# store_avg_object_size 13 KB
-
-#  TAG: store_objects_per_bucket
-#	Target number of objects per bucket in the store hash table.
-#	Lowering this value increases the total number of buckets and
-#	also the storage maintenance rate.  The default is 20.
-#
-#Default:
-# store_objects_per_bucket 20
-
-
-# HTTP OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: request_header_max_size	(KB)
-#	This specifies the maximum size for HTTP headers in a request.
-#	Request headers are usually relatively small (about 512 bytes).
-#	Placing a limit on the request header size will catch certain
-#	bugs (for example with persistent connections) and possibly
-#	buffer-overflow or denial-of-service attacks.
-#
-#Default:
-# request_header_max_size 20 KB
-
-#  TAG: reply_header_max_size	(KB)
-#	This specifies the maximum size for HTTP headers in a reply.
-#	Reply headers are usually relatively small (about 512 bytes).
-#	Placing a limit on the reply header size will catch certain
-#	bugs (for example with persistent connections) and possibly
-#	buffer-overflow or denial-of-service attacks.
-#
-#Default:
-# reply_header_max_size 20 KB
-
-#  TAG: request_body_max_size	(KB)
-#	This specifies the maximum size for an HTTP request body.
-#	In other words, the maximum size of a PUT/POST request.
-#	A user who attempts to send a request with a body larger
-#	than this limit receives an "Invalid Request" error message.
-#	If you set this parameter to a zero (the default), there will
-#	be no limit imposed.
-#
-#Default:
-# request_body_max_size 0 KB
-
-#  TAG: broken_posts
-#	A list of ACL elements which, if matched, causes Squid to send
-#	an extra CRLF pair after the body of a PUT/POST request.
-#
-#	Some HTTP servers has broken implementations of PUT/POST,
-#	and rely on an extra CRLF pair sent by some WWW clients.
-#
-#	Quote from RFC2616 section 4.1 on this matter:
-#
-#	  Note: certain buggy HTTP/1.0 client implementations generate an
-#	  extra CRLF's after a POST request. To restate what is explicitly
-#	  forbidden by the BNF, an HTTP/1.1 client must not preface or follow
-#	  a request with an extra CRLF.
-#
-#Example:
-# acl buggy_server url_regex ^http://....
-# broken_posts allow buggy_server
-#
-#Default:
-# none
-
-#  TAG: upgrade_http0.9
-#	This access list controls when HTTP/0.9 responses is upgraded
-#	to our current HTTP version. The default is to always upgrade.
-#
-#	Some applications expect to be able to respond with non-HTTP
-#	responses and clients gets confused if the response is upgraded.
-#	For example SHOUTcast servers used for mp3 streaming.
-#
-#	To enable some flexibility in detection of such applications
-#	the first line of the response is available in the internal header
-#	X-HTTP09-First-Line for use in the rep_header acl.
-#
-# Don't upgrade ShoutCast responses to HTTP
-acl shoutcast rep_header X-HTTP09-First-Line ^ICY.[0-9]
-upgrade_http0.9 deny shoutcast
-
-#  TAG: via	on|off
-#	If set (default), Squid will include a Via header in requests and
-#	replies as required by RFC2616.
-#
-#Default:
-# via on
-
-#  TAG: cache_vary
-#	When 'cache_vary' is set to off, response that have a
-#	Vary header will not be stored in the cache.
-#
-#Default:
-# cache_vary on
-
-#  TAG: broken_vary_encoding
-#	Many servers have broken support for on-the-fly Content-Encoding,
-#	returning the same ETag on both plain and gzip:ed variants.
-#	Vary replies matching this access list will have the cache split
-#	on the Accept-Encoding header of the request and not trusting the
-#	ETag to be unique.
-#
-# Apache mod_gzip and mod_deflate known to be broken so don't trust
-# Apache to signal ETag correctly on such responses
-acl apache rep_header Server ^Apache
-broken_vary_encoding allow apache
-
-#  TAG: collapsed_forwarding	(on|off)
-#	This option enables multiple requests for the same URI to be
-#	processed as one request. Normally disabled to avoid increased
-#	latency on dynamic content, but there can be benefit from enabling
-#	this in accelerator setups where the web servers are the bottleneck
-#	and reliable and returns mostly cacheable information.
-#
-#Default:
-# collapsed_forwarding off
-
-#  TAG: refresh_stale_hit	(time)
-#	This option changes the refresh algorithm to allow concurrent
-#	requests while an object is being refreshed to be processed as
-#	cache hits if the object expired less than X seconds ago. Default
-#	is 0 to disable this feature. This option is mostly interesting
-#	in accelerator setups where a few objects is accessed very
-#	frequently.
-#
-#Default:
-# refresh_stale_hit 0 seconds
-
-#  TAG: ie_refresh	on|off
-#	Microsoft Internet Explorer up until version 5.5 Service
-#	Pack 1 has an issue with transparent proxies, wherein it
-#	is impossible to force a refresh.  Turning this on provides
-#	a partial fix to the problem, by causing all IMS-REFRESH
-#	requests from older IE versions to check the origin server
-#	for fresh content.  This reduces hit ratio by some amount
-#	(~10% in my experience), but allows users to actually get
-#	fresh content when they want it.  Note because Squid
-#	cannot tell if the user is using 5.5 or 5.5SP1, the behavior
-#	of 5.5 is unchanged from old versions of Squid (i.e. a
-#	forced refresh is impossible).  Newer versions of IE will,
-#	hopefully, continue to have the new behavior and will be
-#	handled based on that assumption.  This option defaults to
-#	the old Squid behavior, which is better for hit ratios but
-#	worse for clients using IE, if they need to be able to
-#	force fresh content.
-#
-#Default:
-# ie_refresh off
-
-#  TAG: vary_ignore_expire	on|off
-#	Many HTTP servers supporting Vary gives such objects
-#	immediate expiry time with no cache-control header
-#	when requested by a HTTP/1.0 client. This option
-#	enables Squid to ignore such expiry times until
-#	HTTP/1.1 is fully implemented.
-#	WARNING: This may eventually cause some varying
-#	objects not intended for caching to get cached.
-#
-#Default:
-# vary_ignore_expire off
-
-#  TAG: extension_methods
-#	Squid only knows about standardized HTTP request methods.
-#	You can add up to 20 additional "extension" methods here.
-extension_methods REPORT MERGE MKACTIVITY CHECKOUT
-
-#  TAG: request_entities
-#	Squid defaults to deny GET and HEAD requests with request entities,
-#	as the meaning of such requests are undefined in the HTTP standard
-#	even if not explicitly forbidden.
-#
-#	Set this directive to on if you have clients which insists
-#	on sending request entities in GET or HEAD requests. But be warned
-#	that there is server software (both proxies and web servers) which
-#	can fail to properly process this kind of request which may make you
-#	vulnerable to cache pollution attacks if enabled.
-#
-#Default:
-# request_entities off
-
-#  TAG: header_access
-#	Usage: header_access header_name allow|deny [!]aclname ...
-#
-#	WARNING: Doing this VIOLATES the HTTP standard.  Enabling
-#	this feature could make you liable for problems which it
-#	causes.
-#
-#	This option replaces the old 'anonymize_headers' and the
-#	older 'http_anonymizer' option with something that is much
-#	more configurable. This new method creates a list of ACLs
-#	for each header, allowing you very fine-tuned header
-#	mangling.
-#
-#	You can only specify known headers for the header name.
-#	Other headers are reclassified as 'Other'. You can also
-#	refer to all the headers with 'All'.
-#
-#	For example, to achieve the same behavior as the old
-#	'http_anonymizer standard' option, you should use:
-#
-#		header_access From deny all
-#		header_access Referer deny all
-#		header_access Server deny all
-#		header_access User-Agent deny all
-#		header_access WWW-Authenticate deny all
-#		header_access Link deny all
-#
-#	Or, to reproduce the old 'http_anonymizer paranoid' feature
-#	you should use:
-#
-#		header_access Allow allow all
-#		header_access Authorization allow all
-#		header_access WWW-Authenticate allow all
-#		header_access Proxy-Authorization allow all
-#		header_access Proxy-Authenticate allow all
-#		header_access Cache-Control allow all
-#		header_access Content-Encoding allow all
-#		header_access Content-Length allow all
-#		header_access Content-Type allow all
-#		header_access Date allow all
-#		header_access Expires allow all
-#		header_access Host allow all
-#		header_access If-Modified-Since allow all
-#		header_access Last-Modified allow all
-#		header_access Location allow all
-#		header_access Pragma allow all
-#		header_access Accept allow all
-#		header_access Accept-Charset allow all
-#		header_access Accept-Encoding allow all
-#		header_access Accept-Language allow all
-#		header_access Content-Language allow all
-#		header_access Mime-Version allow all
-#		header_access Retry-After allow all
-#		header_access Title allow all
-#		header_access Connection allow all
-#		header_access Proxy-Connection allow all
-#		header_access All deny all
-#
-#	By default, all headers are allowed (no anonymizing is
-#	performed).
-#
-#Default:
-# none
-
-#  TAG: header_replace
-#	Usage:   header_replace header_name message
-#	Example: header_replace User-Agent Nutscrape/1.0 (CP/M; 8-bit)
-#
-#	This option allows you to change the contents of headers
-#	denied with header_access above, by replacing them with
-#	some fixed string. This replaces the old fake_user_agent
-#	option.
-#
-#	By default, headers are removed if denied.
-#
-#Default:
-# none
-
-#  TAG: relaxed_header_parser	on|off|warn
-#	In the default "on" setting Squid accepts certain forms
-#	of non-compliant HTTP messages where it is unambiguous
-#	what the sending application intended even if the message
-#	is not correctly formatted. The messages is then normalized
-#	to the correct form when forwarded by Squid.
-#
-#	If set to "warn" then a warning will be emitted in cache.log
-#	each time such HTTP error is encountered.
-#
-#	If set to "off" then such HTTP errors will cause the request
-#	or response to be rejected.
-#
-#Default:
-# relaxed_header_parser on
-
-#  TAG: server_http11	on|off
-#	This option enables the use ot HTTP/1.1 on outgoing "direct" requests.
-#	See also the http11 cache_peer option.
-#	Note: The HTTP/1.1 support is still incomplete, with an
-#	internal HTTP/1.0 hop. As result 1xx responses will not
-#	be forwarded.
-#
-#Default:
-# server_http11 off
-
-#  TAG: ignore_expect_100	on|off
-#	This option makes Squid ignore any Expect: 100-continue header present
-#	in the request.
-#	Note: Enabling this is a HTTP protocol violation, but some client may
-#	not handle it well..
-#
-#Default:
-# ignore_expect_100 off
-
-#  TAG: external_refresh_check
-#	This option defines an external helper for determining whether to
-#	refresh a stale response. It will be called when Squid receives a
-#	request for a cached response that is stale; the helper can either
-#	confirm that the response is stale with a STALE response, or
-#	extend the freshness of the response (thereby avoiding a refresh
-#	check) with a FRESH response, along with a freshness=nnn keyword.
-#
-#	  external_refresh_check [options] FORMAT.. /path/to/helper [helper_args]
-#
-#	If present, helper_args will be passed to the helper on the command
-#	line verbatim.
-#
-#	Options:
-#
-#	  children=n	Number of processes to spawn to service external
-#			refresh checks (default 5).
-#	  concurrency=n	Concurrency level per process. Only used with
-#			helpers capable of processing more than one query
-#			at a time.
-#
-#	When using the concurrency option, the protocol is changed by introducing
-#	a query channel tag infront of the request/response. The query channel
-#	tag is a number between 0 and concurrency-1.
-#
-#	FORMAT specifications:
-#
-#	  %CACHE_URI	The URI of the cached response
-#	  %RES{Header}	HTTP response header value
-#	  %AGE		The age of the cached response
-#
-#	The request sent to the helper consists of the data in the format
-#	specification in the order specified.
-#
-#	The helper receives lines per the above format specification, and
-#	returns lines starting with OK or ERR indicating the validity of
-#	the request and optionally followed by additional keywords with
-#	more details.  URL escaping is used to protect each value in both
-#	requests and responses.
-#
-#	General result syntax:
-#
-#	  FRESH / STALE keyword=value ...
-#
-#	Defined keywords:
-#
-#	  freshness=nnn	The number of seconds to extend the freshness of
-#			the response by.
-#	  log=string	String to be logged in access.log. Available as
-#			%ef in logformat specifications.
-#	  res{Header}=value
-#			Value to update response headers with. If already
-#			present, the supplied value completely replaces
-#			the cached value.
-#
-#	In the event of a helper-related error (e.g., overload), Squid
-#	will always default to STALE.
-#
-#Default:
-# none
-
-
-# TIMEOUTS
-# -----------------------------------------------------------------------------
-
-#  TAG: forward_timeout	time-units
-#	This parameter specifies how long Squid should at most attempt in
-#	finding a forwarding path for the request before giving up.
-#
-#Default:
-# forward_timeout 4 minutes
-
-#  TAG: connect_timeout	time-units
-#	This parameter specifies how long to wait for the TCP connect to
-#	the requested server or peer to complete before Squid should
-#	attempt to find another path where to forward the request.
-#
-#Default:
-# connect_timeout 1 minute
-
-#  TAG: peer_connect_timeout	time-units
-#	This parameter specifies how long to wait for a pending TCP
-#	connection to a peer cache.  The default is 30 seconds.   You
-#	may also set different timeout values for individual neighbors
-#	with the 'connect-timeout' option on a 'cache_peer' line.
-#
-#Default:
-# peer_connect_timeout 30 seconds
-
-#  TAG: read_timeout	time-units
-#	The read_timeout is applied on server-side connections.  After
-#	each successful read(), the timeout will be extended by this
-#	amount.  If no data is read again after this amount of time,
-#	the request is aborted and logged with ERR_READ_TIMEOUT.  The
-#	default is 15 minutes.
-#
-#Default:
-# read_timeout 15 minutes
-
-#  TAG: request_timeout
-#	How long to wait for an HTTP request after initial
-#	connection establishment.
-#
-#Default:
-# request_timeout 5 minutes
-
-#  TAG: persistent_request_timeout
-#	How long to wait for the next HTTP request on a persistent
-#	connection after the previous request completes.
-#
-#Default:
-# persistent_request_timeout 2 minutes
-
-#  TAG: client_lifetime	time-units
-#	The maximum amount of time a client (browser) is allowed to
-#	remain connected to the cache process.  This protects the Cache
-#	from having a lot of sockets (and hence file descriptors) tied up
-#	in a CLOSE_WAIT state from remote clients that go away without
-#	properly shutting down (either because of a network failure or
-#	because of a poor client implementation).  The default is one
-#	day, 1440 minutes.
-#
-#	NOTE:  The default value is intended to be much larger than any
-#	client would ever need to be connected to your cache.  You
-#	should probably change client_lifetime only as a last resort.
-#	If you seem to have many client connections tying up
-#	filedescriptors, we recommend first tuning the read_timeout,
-#	request_timeout, persistent_request_timeout and quick_abort values.
-#
-#Default:
-# client_lifetime 1 day
-
-#  TAG: half_closed_clients
-#	Some clients may shutdown the sending side of their TCP
-#	connections, while leaving their receiving sides open.	Sometimes,
-#	Squid can not tell the difference between a half-closed and a
-#	fully-closed TCP connection.  By default, half-closed client
-#	connections are kept open until a read(2) or write(2) on the
-#	socket returns an error.  Change this option to 'off' and Squid
-#	will immediately close client connections when read(2) returns
-#	"no more data to read."
-#
-#Default:
-# half_closed_clients on
-
-#  TAG: pconn_timeout
-#	Timeout for idle persistent connections to servers and other
-#	proxies.
-#
-#Default:
-# pconn_timeout 1 minute
-
-#  TAG: ident_timeout
-#	Maximum time to wait for IDENT lookups to complete.
-#
-#	If this is too high, and you enabled IDENT lookups from untrusted
-#	users, you might be susceptible to denial-of-service by having
-#	many ident requests going at once.
-#
-#Default:
-# ident_timeout 10 seconds
-
-#  TAG: shutdown_lifetime	time-units
-#	When SIGTERM or SIGHUP is received, the cache is put into
-#	"shutdown pending" mode until all active sockets are closed.
-#	This value is the lifetime to set for all open descriptors
-#	during shutdown mode.  Any active clients after this many
-#	seconds will receive a 'timeout' message.
-#
-#Default:
-# shutdown_lifetime 30 seconds
-
-
-# ADMINISTRATIVE PARAMETERS
-# -----------------------------------------------------------------------------
-
-#  TAG: cache_mgr
-#	Email-address of local cache manager who will receive
-#	mail if the cache dies. The default is "webmaster".
-#
-#Default:
-# cache_mgr webmaster
-
-#  TAG: mail_from
-#	From: email-address for mail sent when the cache dies.
-#	The default is to use 'appname@unique_hostname'.
-#	Default appname value is "squid", can be changed into
-#	src/globals.h before building squid.
-#
-#Default:
-# none
-
-#  TAG: mail_program
-#	Email program used to send mail if the cache dies.
-#	The default is "mail". The specified program must comply
-#	with the standard Unix mail syntax:
-#	  mail-program recipient < mailfile
-#
-#	Optional command line options can be specified.
-#
-#Default:
-# mail_program mail
-
-#  TAG: cache_effective_user
-#	If you start Squid as root, it will change its effective/real
-#	UID/GID to the user specified below.  The default is to change
-#	to UID to proxy.  If you define cache_effective_user, but not
-#	cache_effective_group, Squid sets the GID to the effective
-#	user's default group ID (taken from the password file) and
-#	supplementary group list from the from groups membership of
-#	cache_effective_user.
-#
-#Default:
-# cache_effective_user proxy
-
-#  TAG: cache_effective_group
-#	If you want Squid to run with a specific GID regardless of
-#	the group memberships of the effective user then set this
-#	to the group (or GID) you want Squid to run as. When set
-#	all other group privileges of the effective user is ignored
-#	and only this GID is effective. If Squid is not started as
-#	root the user starting Squid must be member of the specified
-#	group.
-#
-#Default:
-# none
-
-#  TAG: httpd_suppress_version_string	on|off
-#	Suppress Squid version string info in HTTP headers and HTML error pages.
-#
-#Default:
-# httpd_suppress_version_string off
-
-#  TAG: visible_hostname
-#	If you want to present a special hostname in error messages, etc,
-#	define this.  Otherwise, the return value of gethostname()
-#	will be used. If you have multiple caches in a cluster and
-#	get errors about IP-forwarding you must set them to have individual
-#	names with this setting.
-#
-#Default:
-# none
-
-#  TAG: unique_hostname
-#	If you want to have multiple machines with the same
-#	'visible_hostname' you must give each machine a different
-#	'unique_hostname' so forwarding loops can be detected.
-#
-#Default:
-# none
-
-#  TAG: hostname_aliases
-#	A list of other DNS names your cache has.
-#
-#Default:
-# none
-
-#  TAG: umask
-#	Minimum umask which should be enforced while the proxy
-#	is running, in addition to the umask set at startup.
-#
-#	Note: Should start with a 0 to indicate the normal octal
-#	representation of umasks
-#
-#Default:
-# umask 027
-
-
-# OPTIONS FOR THE CACHE REGISTRATION SERVICE
-# -----------------------------------------------------------------------------
-#
-#	This section contains parameters for the (optional) cache
-#	announcement service.  This service is provided to help
-#	cache administrators locate one another in order to join or
-#	create cache hierarchies.
-#
-#	An 'announcement' message is sent (via UDP) to the registration
-#	service by Squid.  By default, the announcement message is NOT
-#	SENT unless you enable it with 'announce_period' below.
-#
-#	The announcement message includes your hostname, plus the
-#	following information from this configuration file:
-#
-#		http_port
-#		icp_port
-#		cache_mgr
-#
-#	All current information is processed regularly and made
-#	available on the Web at http://www.ircache.net/Cache/Tracker/.
-
-#  TAG: announce_period
-#	This is how frequently to send cache announcements.  The
-#	default is `0' which disables sending the announcement
-#	messages.
-#
-#	To enable announcing your cache, just uncomment the line
-#	below.
-#
-#Default:
-# announce_period 0
-#
-#To enable announcing your cache, just uncomment the line below.
-#announce_period 1 day
-
-#  TAG: announce_host
-#  TAG: announce_file
-#  TAG: announce_port
-#	announce_host and announce_port set the hostname and port
-#	number where the registration message will be sent.
-#
-#	Hostname will default to 'tracker.ircache.net' and port will
-#	default default to 3131.  If the 'filename' argument is given,
-#	the contents of that file will be included in the announce
-#	message.
-#
-#Default:
-# announce_host tracker.ircache.net
-# announce_port 3131
-
-
-# HTTPD-ACCELERATOR OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: httpd_accel_no_pmtu_disc	on|off
-#	In many setups of transparently intercepting proxies Path-MTU
-#	discovery can not work on traffic towards the clients. This is
-#	the case when the intercepting device does not fully track
-#	connections and fails to forward ICMP must fragment messages
-#	to the cache server.
-#
-#	If you have such setup and experience that certain clients
-#	sporadically hang or never complete requests set this to on.
-#
-#Default:
-# httpd_accel_no_pmtu_disc off
-
-
-# DELAY POOL PARAMETERS
-# -----------------------------------------------------------------------------
-
-#  TAG: delay_pools
-#	This represents the number of delay pools to be used.  For example,
-#	if you have one class 2 delay pool and one class 3 delays pool, you
-#	have a total of 2 delay pools.
-#
-#Default:
-# delay_pools 0
-
-#  TAG: delay_class
-#	This defines the class of each delay pool.  There must be exactly one
-#	delay_class line for each delay pool.  For example, to define two
-#	delay pools, one of class 2 and one of class 3, the settings above
-#	and here would be:
-#
-#Example:
-# delay_pools 2      # 2 delay pools
-# delay_class 1 2    # pool 1 is a class 2 pool
-# delay_class 2 3    # pool 2 is a class 3 pool
-#
-#	The delay pool classes are:
-#
-#		class 1		Everything is limited by a single aggregate
-#				bucket.
-#
-#		class 2 	Everything is limited by a single aggregate
-#				bucket as well as an "individual" bucket chosen
-#				from bits 25 through 32 of the IP address.
-#
-#		class 3		Everything is limited by a single aggregate
-#				bucket as well as a "network" bucket chosen
-#				from bits 17 through 24 of the IP address and a
-#				"individual" bucket chosen from bits 17 through
-#				32 of the IP address.
-#
-#	NOTE: If an IP address is a.b.c.d
-#		-> bits 25 through 32 are "d"
-#		-> bits 17 through 24 are "c"
-#		-> bits 17 through 32 are "c * 256 + d"
-#
-#Default:
-# none
-
-#  TAG: delay_access
-#	This is used to determine which delay pool a request falls into.
-#
-#	delay_access is sorted per pool and the matching starts with pool 1,
-#	then pool 2, ..., and finally pool N. The first delay pool where the
-#	request is allowed is selected for the request. If it does not allow
-#	the request to any pool then the request is not delayed (default).
-#
-#	For example, if you want some_big_clients in delay
-#	pool 1 and lotsa_little_clients in delay pool 2:
-#
-#Example:
-# delay_access 1 allow some_big_clients
-# delay_access 1 deny all
-# delay_access 2 allow lotsa_little_clients
-# delay_access 2 deny all
-#
-#Default:
-# none
-
-#  TAG: delay_parameters
-#	This defines the parameters for a delay pool.  Each delay pool has
-#	a number of "buckets" associated with it, as explained in the
-#	description of delay_class.  For a class 1 delay pool, the syntax is:
-#
-#delay_parameters pool aggregate
-#
-#	For a class 2 delay pool:
-#
-#delay_parameters pool aggregate individual
-#
-#	For a class 3 delay pool:
-#
-#delay_parameters pool aggregate network individual
-#
-#	The variables here are:
-#
-#		pool		a pool number - ie, a number between 1 and the
-#				number specified in delay_pools as used in
-#				delay_class lines.
-#
-#		aggregate	the "delay parameters" for the aggregate bucket
-#				(class 1, 2, 3).
-#
-#		individual	the "delay parameters" for the individual
-#				buckets (class 2, 3).
-#
-#		network		the "delay parameters" for the network buckets
-#				(class 3).
-#
-#	A pair of delay parameters is written restore/maximum, where restore is
-#	the number of bytes (not bits - modem and network speeds are usually
-#	quoted in bits) per second placed into the bucket, and maximum is the
-#	maximum number of bytes which can be in the bucket at any time.
-#
-#	For example, if delay pool number 1 is a class 2 delay pool as in the
-#	above example, and is being used to strictly limit each host to 64kbps
-#	(plus overheads), with no overall limit, the line is:
-#
-#delay_parameters 1 -1/-1 8000/8000
-#
-#	Note that the figure -1 is used to represent "unlimited".
-#
-#	And, if delay pool number 2 is a class 3 delay pool as in the above
-#	example, and you want to limit it to a total of 256kbps (strict limit)
-#	with each 8-bit network permitted 64kbps (strict limit) and each
-#	individual host permitted 4800bps with a bucket maximum size of 64kb
-#	to permit a decent web page to be downloaded at a decent speed
-#	(if the network is not being limited due to overuse) but slow down
-#	large downloads more significantly:
-#
-#delay_parameters 2 32000/32000 8000/8000 600/8000
-#
-#	There must be one delay_parameters line for each delay pool.
-#
-#Default:
-# none
-
-#  TAG: delay_initial_bucket_level	(percent, 0-100)
-#	The initial bucket percentage is used to determine how much is put
-#	in each bucket when squid starts, is reconfigured, or first notices
-#	a host accessing it (in class 2 and class 3, individual hosts and
-#	networks only have buckets associated with them once they have been
-#	"seen" by squid).
-#
-#Default:
-# delay_initial_bucket_level 50
-
-
-# WCCPv1 AND WCCPv2 CONFIGURATION OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: wccp_router
-#  TAG: wccp2_router
-#	Use this option to define your WCCP ``home'' router for
-#	Squid.
-#
-#	wccp_router supports a single WCCP(v1) router
-#
-#	wccp2_router supports multiple WCCPv2 routers
-#
-#	only one of the two may be used at the same time and defines
-#	which version of WCCP to use.
-#
-#Default:
-# wccp_router 0.0.0.0
-
-#  TAG: wccp_version
-#	This directive is only relevant if you need to set up WCCP(v1)
-#	to some very old and end-of-life Cisco routers. In all other
-#	setups it must be left unset or at the default setting.
-#	It defines an internal version in the WCCP(v1) protocol,
-#	with version 4 being the officially documented protocol.
-#
-#	According to some users, Cisco IOS 11.2 and earlier only
-#	support WCCP version 3.  If you're using that or an earlier
-#	version of IOS, you may need to change this value to 3, otherwise
-#	do not specify this parameter.
-#
-#Default:
-# wccp_version 4
-
-#  TAG: wccp2_rebuild_wait
-#	If this is enabled Squid will wait for the cache dir rebuild to finish
-#	before sending the first wccp2 HereIAm packet
-#
-#Default:
-# wccp2_rebuild_wait on
-
-#  TAG: wccp2_forwarding_method
-#	WCCP2 allows the setting of forwarding methods between the
-#	router/switch and the cache.  Valid values are as follows:
-#
-#	1 - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
-#	2 - L2 redirect (forward the packet using Layer 2/MAC rewriting)
-#
-#	Currently (as of IOS 12.4) cisco routers only support GRE.
-#	Cisco switches only support the L2 redirect assignment method.
-#
-#Default:
-# wccp2_forwarding_method 1
-
-#  TAG: wccp2_return_method
-#	WCCP2 allows the setting of return methods between the
-#	router/switch and the cache for packets that the cache
-#	decides not to handle.  Valid values are as follows:
-#
-#	1 - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
-#	2 - L2 redirect (forward the packet using Layer 2/MAC rewriting)
-#
-#	Currently (as of IOS 12.4) cisco routers only support GRE.
-#	Cisco switches only support the L2 redirect assignment.
-#
-#	If the "ip wccp redirect exclude in" command has been
-#	enabled on the cache interface, then it is still safe for
-#	the proxy server to use a l2 redirect method even if this
-#	option is set to GRE.
-#
-#Default:
-# wccp2_return_method 1
-
-#  TAG: wccp2_assignment_method
-#	WCCP2 allows the setting of methods to assign the WCCP hash
-#	Valid values are as follows:
-#
-#	1 - Hash assignment
-#	2 - Mask assignment
-#
-#	As a general rule, cisco routers support the hash assignment method
-#	and cisco switches support the mask assignment method.
-#
-#Default:
-# wccp2_assignment_method 1
-
-#  TAG: wccp2_service
-#	WCCP2 allows for multiple traffic services. There are two
-#	types: "standard" and "dynamic". The standard type defines
-#	one service id - http (id 0). The dynamic service ids can be from
-#	51 to 255 inclusive.  In order to use a dynamic service id
-#	one must define the type of traffic to be redirected; this is done
-#	using the wccp2_service_info option.
-#
-#	The "standard" type does not require a wccp2_service_info option,
-#	just specifying the service id will suffice.
-#
-#	MD5 service authentication can be enabled by adding
-#	"password=<password>" to the end of this service declaration.
-#
-#	Examples:
-#
-#	wccp2_service standard 0	# for the 'web-cache' standard service
-#	wccp2_service dynamic 80	# a dynamic service type which will be
-#					# fleshed out with subsequent options.
-#	wccp2_service standard 0 password=foo
-#
-#
-#Default:
-# wccp2_service standard 0
-
-#  TAG: wccp2_service_info
-#	Dynamic WCCPv2 services require further information to define the
-#	traffic you wish to have diverted.
-#
-#	The format is:
-#
-#	wccp2_service_info <id> protocol=<protocol> flags=<flag>,<flag>..
-#	    priority=<priority> ports=<port>,<port>..
-#
-#	The relevant WCCPv2 flags:
-#	+ src_ip_hash, dst_ip_hash
-#	+ source_port_hash, dst_port_hash
-#	+ src_ip_alt_hash, dst_ip_alt_hash
-#	+ src_port_alt_hash, dst_port_alt_hash
-#	+ ports_source
-#
-#	The port list can be one to eight entries.
-#
-#	Example:
-#
-#	wccp2_service_info 80 protocol=tcp flags=src_ip_hash,ports_source
-#	    priority=240 ports=80
-#
-#	Note: the service id must have been defined by a previous
-#	'wccp2_service dynamic <id>' entry.
-#
-#Default:
-# none
-
-#  TAG: wccp2_weight
-#	Each cache server gets assigned a set of the destination
-#	hash proportional to their weight.
-#
-#Default:
-# wccp2_weight 10000
-
-#  TAG: wccp_address
-#  TAG: wccp2_address
-#	Use this option if you require WCCP to use a specific
-#	interface address.
-#
-#	The default behavior is to not bind to any specific address.
-#
-#Default:
-# wccp_address 0.0.0.0
-# wccp2_address 0.0.0.0
-
-
-# PERSISTENT CONNECTION HANDLING
-# -----------------------------------------------------------------------------
-#
-# Also see "pconn_timeout" in the TIMEOUTS section
-
-#  TAG: client_persistent_connections
-#  TAG: server_persistent_connections
-#	Persistent connection support for clients and servers.  By
-#	default, Squid uses persistent connections (when allowed)
-#	with its clients and servers.  You can use these options to
-#	disable persistent connections with clients and/or servers.
-#
-#Default:
-# client_persistent_connections on
-# server_persistent_connections on
-
-#  TAG: persistent_connection_after_error
-#	With this directive the use of persistent connections after
-#	HTTP errors can be disabled. Useful if you have clients
-#	who fail to handle errors on persistent connections proper.
-#
-#Default:
-# persistent_connection_after_error off
-
-#  TAG: detect_broken_pconn
-#	Some servers have been found to incorrectly signal the use
-#	of HTTP/1.0 persistent connections even on replies not
-#	compatible, causing significant delays. This server problem
-#	has mostly been seen on redirects.
-#
-#	By enabling this directive Squid attempts to detect such
-#	broken replies and automatically assume the reply is finished
-#	after 10 seconds timeout.
-#
-#Default:
-# detect_broken_pconn off
-
-
-# CACHE DIGEST OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: digest_generation
-#	This controls whether the server will generate a Cache Digest
-#	of its contents.
-#
-#Default:
-# digest_generation on
-
-#  TAG: digest_bits_per_entry
-#	This is the number of bits of the server's Cache Digest which
-#	will be associated with the Digest entry for a given HTTP
-#	Method and URL (public key) combination.  The default is 5.
-#
-#Default:
-# digest_bits_per_entry 5
-
-#  TAG: digest_rebuild_period	(seconds)
-#	This is the wait time between Cache Digest rebuilds.
-#
-#Default:
-# digest_rebuild_period 1 hour
-
-#  TAG: digest_rewrite_period	(seconds)
-#	This is the wait time between Cache Digest writes to disk.
-#
-#Default:
-# digest_rewrite_period 1 hour
-
-#  TAG: digest_swapout_chunk_size	(bytes)
-#	This is the number of bytes of the Cache Digest to write to
-#	disk at a time.  It defaults to 4096 bytes (4KB), the Squid
-#	default swap page.
-#
-#Default:
-# digest_swapout_chunk_size 4096 bytes
-
-#  TAG: digest_rebuild_chunk_percentage	(percent, 0-100)
-#	This is the percentage of the Cache Digest to be scanned at a
-#	time.  By default it is set to 10% of the Cache Digest.
-#
-#Default:
-# digest_rebuild_chunk_percentage 10
-
-
-# SNMP OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: snmp_port
-#	Squid can now serve statistics and status information via SNMP.
-#	By default it listens to port 3401 on the machine. If you don't
-#	wish to use SNMP, set this to "0".
-#
-#	Note: on Debian/Linux, the default is zero - you need to
-#	set it to 3401 to enable it.
-#
-#Default:
-# snmp_port 0
-
-#  TAG: snmp_access
-#	Allowing or denying access to the SNMP port.
-#
-#	All access to the agent is denied by default.
-#	usage:
-#
-#	snmp_access allow|deny [!]aclname ...
-#
-#Example:
-# snmp_access allow snmppublic localhost
-# snmp_access deny all
-#
-#Default:
-# snmp_access deny all
-
-#  TAG: snmp_incoming_address
-#  TAG: snmp_outgoing_address
-#	Just like 'udp_incoming_address' above, but for the SNMP port.
-#
-#	snmp_incoming_address	is used for the SNMP socket receiving
-#				messages from SNMP agents.
-#	snmp_outgoing_address	is used for SNMP packets returned to SNMP
-#				agents.
-#
-#	The default snmp_incoming_address (0.0.0.0) is to listen on all
-#	available network interfaces.
-#
-#	If snmp_outgoing_address is set to 255.255.255.255 (the default)
-#	it will use the same socket as snmp_incoming_address. Only
-#	change this if you want to have SNMP replies sent using another
-#	address than where this Squid listens for SNMP queries.
-#
-#	NOTE, snmp_incoming_address and snmp_outgoing_address can not have
-#	the same value since they both use port 3401.
-#
-#Default:
-# snmp_incoming_address 0.0.0.0
-# snmp_outgoing_address 255.255.255.255
-
-
-# ICP OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: icp_port
-#	The port number where Squid sends and receives ICP queries to
-#	and from neighbor caches.  Default is 3130.  To disable use
-#	"0".  May be overridden with -u on the command line.
-#
-#Default:
-# icp_port 3130
-
-#  TAG: htcp_port
-#	The port number where Squid sends and receives HTCP queries to
-#	and from neighbor caches.  To turn it on you want to set it 4827.
-#	By default it is set to "0" (disabled).
-#
-#Default:
-# htcp_port 0
-
-#  TAG: log_icp_queries	on|off
-#	If set, ICP queries are logged to access.log. You may wish
-#	do disable this if your ICP load is VERY high to speed things
-#	up or to simplify log analysis.
-#
-#Default:
-# log_icp_queries on
-
-#  TAG: udp_incoming_address
-#	udp_incoming_address	is used for UDP packets received from other
-#				caches.
-#
-#	The default behavior is to not bind to any specific address.
-#
-#	Only change this if you want to have all UDP queries received on
-#	a specific interface/address.
-#
-#	NOTE: udp_incoming_address is used by the ICP, HTCP, and DNS
-#	modules. Altering it will affect all of them in the same manner.
-#
-#	see also; udp_outgoing_address
-#
-#	NOTE, udp_incoming_address and udp_outgoing_address can not
-#	have the same value since they both use the same port.
-#
-#Default:
-# udp_incoming_address 0.0.0.0
-
-#  TAG: udp_outgoing_address
-#	udp_outgoing_address	is used for UDP packets sent out to other
-#				caches.
-#
-#	The default behavior is to not bind to any specific address.
-#
-#	Instead it will use the same socket as udp_incoming_address.
-#	Only change this if you want to have UDP queries sent using another
-#	address than where this Squid listens for UDP queries from other
-#	caches.
-#
-#	NOTE: udp_outgoing_address is used by the ICP, HTCP, and DNS
-#	modules. Altering it will affect all of them in the same manner.
-#
-#	see also; udp_incoming_address
-#
-#	NOTE, udp_incoming_address and udp_outgoing_address can not
-#	have the same value since they both use the same port.
-#
-#Default:
-# udp_outgoing_address 255.255.255.255
-
-#  TAG: icp_hit_stale	on|off
-#	If you want to return ICP_HIT for stale cache objects, set this
-#	option to 'on'.  If you have sibling relationships with caches
-#	in other administrative domains, this should be 'off'.  If you only
-#	have sibling relationships with caches under your control,
-#	it is probably okay to set this to 'on'.
-#	If set to 'on', your siblings should use the option "allow-miss"
-#	on their cache_peer lines for connecting to you.
-#
-#Default:
-# icp_hit_stale off
-
-#  TAG: minimum_direct_hops
-#	If using the ICMP pinging stuff, do direct fetches for sites
-#	which are no more than this many hops away.
-#
-#Default:
-# minimum_direct_hops 4
-
-#  TAG: minimum_direct_rtt
-#	If using the ICMP pinging stuff, do direct fetches for sites
-#	which are no more than this many rtt milliseconds away.
-#
-#Default:
-# minimum_direct_rtt 400
-
-#  TAG: netdb_low
-#  TAG: netdb_high
-#	The low and high water marks for the ICMP measurement
-#	database.  These are counts, not percents.  The defaults are
-#	900 and 1000.  When the high water mark is reached, database
-#	entries will be deleted until the low mark is reached.
-#
-#Default:
-# netdb_low 900
-# netdb_high 1000
-
-#  TAG: netdb_ping_period
-#	The minimum period for measuring a site.  There will be at
-#	least this much delay between successive pings to the same
-#	network.  The default is five minutes.
-#
-#Default:
-# netdb_ping_period 5 minutes
-
-#  TAG: query_icmp	on|off
-#	If you want to ask your peers to include ICMP data in their ICP
-#	replies, enable this option.
-#
-#	If your peer has configured Squid (during compilation) with
-#	'--enable-icmp' that peer will send ICMP pings to origin server
-#	sites of the URLs it receives.  If you enable this option the
-#	ICP replies from that peer will include the ICMP data (if available).
-#	Then, when choosing a parent cache, Squid will choose the parent with
-#	the minimal RTT to the origin server.  When this happens, the
-#	hierarchy field of the access.log will be
-#	"CLOSEST_PARENT_MISS".  This option is off by default.
-#
-#Default:
-# query_icmp off
-
-#  TAG: test_reachability	on|off
-#	When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH
-#	instead of ICP_MISS if the target host is NOT in the ICMP
-#	database, or has a zero RTT.
-#
-#Default:
-# test_reachability off
-
-#  TAG: icp_query_timeout	(msec)
-#	Normally Squid will automatically determine an optimal ICP
-#	query timeout value based on the round-trip-time of recent ICP
-#	queries.  If you want to override the value determined by
-#	Squid, set this 'icp_query_timeout' to a non-zero value.  This
-#	value is specified in MILLISECONDS, so, to use a 2-second
-#	timeout (the old default), you would write:
-#
-#		icp_query_timeout 2000
-#
-#Default:
-# icp_query_timeout 0
-
-#  TAG: maximum_icp_query_timeout	(msec)
-#	Normally the ICP query timeout is determined dynamically.  But
-#	sometimes it can lead to very large values (say 5 seconds).
-#	Use this option to put an upper limit on the dynamic timeout
-#	value.  Do NOT use this option to always use a fixed (instead
-#	of a dynamic) timeout value. To set a fixed timeout see the
-#	'icp_query_timeout' directive.
-#
-#Default:
-# maximum_icp_query_timeout 2000
-
-#  TAG: minimum_icp_query_timeout	(msec)
-#	Normally the ICP query timeout is determined dynamically.  But
-#	sometimes it can lead to very small timeouts, even lower than
-#	the normal latency variance on your link due to traffic.
-#	Use this option to put an lower limit on the dynamic timeout
-#	value.  Do NOT use this option to always use a fixed (instead
-#	of a dynamic) timeout value. To set a fixed timeout see the
-#	'icp_query_timeout' directive.
-#
-#Default:
-# minimum_icp_query_timeout 5
-
-
-# MULTICAST ICP OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: mcast_groups
-#	This tag specifies a list of multicast groups which your server
-#	should join to receive multicasted ICP queries.
-#
-#	NOTE!  Be very careful what you put here!  Be sure you
-#	understand the difference between an ICP _query_ and an ICP
-#	_reply_.  This option is to be set only if you want to RECEIVE
-#	multicast queries.  Do NOT set this option to SEND multicast
-#	ICP (use cache_peer for that).  ICP replies are always sent via
-#	unicast, so this option does not affect whether or not you will
-#	receive replies from multicast group members.
-#
-#	You must be very careful to NOT use a multicast address which
-#	is already in use by another group of caches.
-#
-#	If you are unsure about multicast, please read the Multicast
-#	chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/).
-#
-#	Usage: mcast_groups 239.128.16.128 224.0.1.20
-#
-#	By default, Squid doesn't listen on any multicast groups.
-#
-#Default:
-# none
-
-#  TAG: mcast_miss_addr
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-multicast-miss option
-#
-#	If you enable this option, every "cache miss" URL will
-#	be sent out on the specified multicast address.
-#
-#	Do not enable this option unless you are are absolutely
-#	certain you understand what you are doing.
-#
-#Default:
-# mcast_miss_addr 255.255.255.255
-
-#  TAG: mcast_miss_ttl
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-multicast-miss option
-#
-#	This is the time-to-live value for packets multicasted
-#	when multicasting off cache miss URLs is enabled.  By
-#	default this is set to 'site scope', i.e. 16.
-#
-#Default:
-# mcast_miss_ttl 16
-
-#  TAG: mcast_miss_port
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-multicast-miss option
-#
-#	This is the port number to be used in conjunction with
-#	'mcast_miss_addr'.
-#
-#Default:
-# mcast_miss_port 3135
-
-#  TAG: mcast_miss_encode_key
-# Note: This option is only available if Squid is rebuilt with the
-#       --enable-multicast-miss option
-#
-#	The URLs that are sent in the multicast miss stream are
-#	encrypted.  This is the encryption key.
-#
-#Default:
-# mcast_miss_encode_key XXXXXXXXXXXXXXXX
-
-#  TAG: mcast_icp_query_timeout	(msec)
-#	For multicast peers, Squid regularly sends out ICP "probes" to
-#	count how many other peers are listening on the given multicast
-#	address.  This value specifies how long Squid should wait to
-#	count all the replies.  The default is 2000 msec, or 2
-#	seconds.
-#
-#Default:
-# mcast_icp_query_timeout 2000
-
-
-# INTERNAL ICON OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: icon_directory
-#	Where the icons are stored. These are normally kept in
-#	/usr/share/squid/icons
-#
-#Default:
-# icon_directory /usr/share/squid/icons
-
-#  TAG: global_internal_static
-#	This directive controls is Squid should intercept all requests for
-#	/squid-internal-static/ no matter which host the URL is requesting
-#	(default on setting), or if nothing special should be done for
-#	such URLs (off setting). The purpose of this directive is to make
-#	icons etc work better in complex cache hierarchies where it may
-#	not always be possible for all corners in the cache mesh to reach
-#	the server generating a directory listing.
-#
-#Default:
-# global_internal_static on
-
-#  TAG: short_icon_urls
-#	If this is enabled Squid will use short URLs for icons.
-#
-#	If off the URLs for icons will always be absolute URLs
-#	including the proxy name and port.
-#
-#Default:
-# short_icon_urls off
-
-
-# ERROR PAGE OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: error_directory
-#	If you wish to create your own versions of the default
-#	(English) error files, either to customize them to suit your
-#	language or company copy the template English files to another
-#	directory and point this tag at them.
-#
-#	The squid developers are interested in making squid available in
-#	a wide variety of languages. If you are making translations for a
-#	langauge that Squid does not currently provide please consider
-#	contributing your translation back to the project.
-#
-#Default:
-# error_directory /usr/share/squid/errors/en
-
-#  TAG: error_map
-#	Map errors to custom messages
-#
-#	    error_map message_url http_status ...
-#
-#	http_status ... is a list of HTTP status codes or Squid error
-#	messages.
-#
-#	Use in accelerators to substitute the error messages returned
-#	by servers with other custom errors.
-#
-#	    error_map http://your.server/error/404.shtml 404
-#
-#	Requests for error messages is a GET request for the configured
-#	URL with the following special headers
-#
-#	    X-Error-Status:	The received HTTP status code (i.e. 404)
-#	    X-Request-URI:	The requested URI where the error occurred
-#
-#	In Addition the following headers are forwarded from the client
-#	request:
-#
-#	    User-Agent, Cookie, X-Forwarded-For, Via, Authorization,
-#	    Accept, Referer
-#
-#	And the following headers from the server reply:
-#
-#	    Server, Via, Location, Content-Location
-#
-#	The reply returned to the client will carry the original HTTP
-#	headers from the real error message, but with the reply body
-#	of the configured error message.
-#
-#
-#Default:
-# none
-
-#  TAG: err_html_text
-#	HTML text to include in error messages.  Make this a "mailto"
-#	URL to your admin address, or maybe just a link to your
-#	organizations Web page.
-#
-#	To include this in your error messages, you must rewrite
-#	the error template files (found in the "errors" directory).
-#	Wherever you want the 'err_html_text' line to appear,
-#	insert a %L tag in the error template file.
-#
-#Default:
-# none
-
-#  TAG: deny_info
-#	Usage:   deny_info err_page_name acl
-#	or       deny_info http://... acl
-#	Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys
-#
-#	This can be used to return a ERR_ page for requests which
-#	do not pass the 'http_access' rules.  Squid remembers the last
-#	acl it evaluated in http_access, and if a 'deny_info' line exists
-#	for that ACL Squid returns a corresponding error page.
-#
-#	The acl is typically the last acl on the http_access deny line which
-#	denied access. The exceptions to this rule are:
-#	- When Squid needs to request authentication credentials. It's then
-#	  the first authentication related acl encountered
-#	- When none of the http_access lines matches. It's then the last
-#	  acl processed on the last http_access line.
-#
-#	You may use ERR_ pages that come with Squid or create your own pages
-#	and put them into the configured errors/ directory.
-#
-#	Alternatively you can specify an error URL. The browsers will
-#	get redirected (302) to the specified URL. %s in the redirection
-#	URL will be replaced by the requested URL.
-#
-#	Alternatively you can tell Squid to reset the TCP connection
-#	by specifying TCP_RESET.
-#
-#Default:
-# none
-
-
-# OPTIONS INFLUENCING REQUEST FORWARDING 
-# -----------------------------------------------------------------------------
-
-#  TAG: nonhierarchical_direct
-#	By default, Squid will send any non-hierarchical requests
-#	(matching hierarchy_stoplist or not cacheable request type) direct
-#	to origin servers.
-#
-#	If you set this to off, Squid will prefer to send these
-#	requests to parents.
-#
-#	Note that in most configurations, by turning this off you will only
-#	add latency to these request without any improvement in global hit
-#	ratio.
-#
-#	If you are inside an firewall see never_direct instead of
-#	this directive.
-#
-#Default:
-# nonhierarchical_direct on
-
-#  TAG: prefer_direct
-#	Normally Squid tries to use parents for most requests. If you for some
-#	reason like it to first try going direct and only use a parent if
-#	going direct fails set this to on.
-#
-#	By combining nonhierarchical_direct off and prefer_direct on you
-#	can set up Squid to use a parent as a backup path if going direct
-#	fails.
-#
-#	Note: If you want Squid to use parents for all requests see
-#	the never_direct directive. prefer_direct only modifies how Squid
-#	acts on cacheable requests.
-#
-#Default:
-# prefer_direct off
-
-#  TAG: ignore_ims_on_miss	on|off
-#	This options makes Squid ignore If-Modified-Since on
-#	cache misses. This is useful while the cache is
-#	mostly empty to more quickly have the cache populated.
-#
-#Default:
-# ignore_ims_on_miss off
-
-#  TAG: always_direct
-#	Usage: always_direct allow|deny [!]aclname ...
-#
-#	Here you can use ACL elements to specify requests which should
-#	ALWAYS be forwarded by Squid to the origin servers without using
-#	any peers.  For example, to always directly forward requests for
-#	local servers ignoring any parents or siblings you may have use
-#	something like:
-#
-#		acl local-servers dstdomain my.domain.net
-#		always_direct allow local-servers
-#
-#	To always forward FTP requests directly, use
-#
-#		acl FTP proto FTP
-#		always_direct allow FTP
-#
-#	NOTE: There is a similar, but opposite option named
-#	'never_direct'.  You need to be aware that "always_direct deny
-#	foo" is NOT the same thing as "never_direct allow foo".  You
-#	may need to use a deny rule to exclude a more-specific case of
-#	some other rule.  Example:
-#
-#		acl local-external dstdomain external.foo.net
-#		acl local-servers dstdomain  .foo.net
-#		always_direct deny local-external
-#		always_direct allow local-servers
-#
-#	NOTE: If your goal is to make the client forward the request
-#	directly to the origin server bypassing Squid then this needs
-#	to be done in the client configuration. Squid configuration
-#	can only tell Squid how Squid should fetch the object.
-#
-#	NOTE: This directive is not related to caching. The replies
-#	is cached as usual even if you use always_direct. To not cache
-#	the replies see no_cache.
-#
-#	This option replaces some v1.1 options such as local_domain
-#	and local_ip.
-#
-#Default:
-# none
-
-#  TAG: never_direct
-#	Usage: never_direct allow|deny [!]aclname ...
-#
-#	never_direct is the opposite of always_direct.  Please read
-#	the description for always_direct if you have not already.
-#
-#	With 'never_direct' you can use ACL elements to specify
-#	requests which should NEVER be forwarded directly to origin
-#	servers.  For example, to force the use of a proxy for all
-#	requests, except those in your local domain use something like:
-#
-#		acl local-servers dstdomain .foo.net
-#		acl all src 0.0.0.0/0.0.0.0
-#		never_direct deny local-servers
-#		never_direct allow all
-#
-#	or if Squid is inside a firewall and there are local intranet
-#	servers inside the firewall use something like:
-#
-#		acl local-intranet dstdomain .foo.net
-#		acl local-external dstdomain external.foo.net
-#		always_direct deny local-external
-#		always_direct allow local-intranet
-#		never_direct allow all
-#
-#	This option replaces some v1.1 options such as inside_firewall
-#	and firewall_ip.
-#
-#Default:
-# none
-
-
-# ADVANCED NETWORKING OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: max_filedescriptors
-#	The maximum number of filedescriptors supported.
-#
-#	The default "0" means Squid inherits the current ulimit setting.
-#
-#	Note: Changing this requires a restart of Squid. Also
-#	not all comm loops supports values larger than --with-maxfd.
-#
-#Default:
-# max_filedescriptors 0
-
-#  TAG: accept_filter
-#	FreeBSD:
-#
-#	The name of an accept(2) filter to install on Squid's
-#	listen socket(s).  This feature is perhaps specific to
-#	FreeBSD and requires support in the kernel.
-#
-#	The 'httpready' filter delays delivering new connections
-#	to Squid until a full HTTP request has been received.
-#	See the accf_http(9) man page for details.
-#
-#	The 'dataready' filter delays delivering new connections
-#	to Squid until there is some data to process.
-#	See the accf_dataready(9) man page for details.
-#
-#	Linux:
-#	
-#	The 'data' filter delays delivering of new connections
-#	to Squid until there is some data to process by TCP_ACCEPT_DEFER.
-#	You may optionally specify a number of seconds to wait by
-#	'data=N' where N is the number of seconds. Defaults to 30
-#	if not specified.  See the tcp(7) man page for details.
-#EXAMPLE:
-## FreeBSD
-#accept_filter httpready
-## Linux
-#accept_filter data
-#
-#Default:
-# none
-
-#  TAG: tcp_recv_bufsize	(bytes)
-#	Size of receive buffer to set for TCP sockets.  Probably just
-#	as easy to change your kernel's default.  Set to zero to use
-#	the default buffer size.
-#
-#Default:
-# tcp_recv_bufsize 0 bytes
-
-#  TAG: incoming_rate
-#	This directive controls how aggressive Squid should accept new
-#	connections compared to processing existing connections. 
-#	The lower number the more frequent Squid will look for new
-#	incoming requests.
-#
-#Default:
-# incoming_rate 30
-
-
-# DNS OPTIONS
-# -----------------------------------------------------------------------------
-
-#  TAG: check_hostnames
-#	For security and stability reasons Squid by default checks
-#	hostnames for Internet standard RFC compliance. If you do not want
-#	Squid to perform these checks then turn this directive off.
-#
-#Default:
-# check_hostnames on
-
-#  TAG: allow_underscore
-#	Underscore characters is not strictly allowed in Internet hostnames
-#	but nevertheless used by many sites. Set this to off if you want
-#	Squid to be strict about the standard.
-#	This check is performed only when check_hostnames is set to on.
-#
-#Default:
-# allow_underscore on
-
-#  TAG: cache_dns_program
-# Note: This option is only available if Squid is rebuilt with the
-#       --disable-internal-dns option
-#
-#	Specify the location of the executable for dnslookup process.
-#
-#Default:
-# cache_dns_program /usr/lib/squid/dnsserver
-
-#  TAG: dns_children
-# Note: This option is only available if Squid is rebuilt with the
-#       --disable-internal-dns option
-#
-#	The number of processes spawn to service DNS name lookups.
-#	For heavily loaded caches on large servers, you should
-#	probably increase this value to at least 10.  The maximum
-#	is 32.  The default is 5.
-#
-#	You must have at least one dnsserver process.
-#
-#Default:
-# dns_children 5
-
-#  TAG: dns_retransmit_interval
-#	Initial retransmit interval for DNS queries. The interval is
-#	doubled each time all configured DNS servers have been tried.
-#
-#
-#Default:
-# dns_retransmit_interval 5 seconds
-
-#  TAG: dns_timeout
-#	DNS Query timeout. If no response is received to a DNS query
-#	within this time all DNS servers for the queried domain
-#	are assumed to be unavailable.
-#
-#Default:
-# dns_timeout 2 minutes
-
-#  TAG: dns_defnames	on|off
-#	Normally the RES_DEFNAMES resolver option is disabled
-#	(see res_init(3)).  This prevents caches in a hierarchy
-#	from interpreting single-component hostnames locally.  To allow
-#	Squid to handle single-component names, enable this option.
-#
-#Default:
-# dns_defnames off
-
-#  TAG: dns_nameservers
-#	Use this if you want to specify a list of DNS name servers
-#	(IP addresses) to use instead of those given in your
-#	/etc/resolv.conf file.
-#	On Windows platforms, if no value is specified here or in
-#	the /etc/resolv.conf file, the list of DNS name servers are
-#	taken from the Windows registry, both static and dynamic DHCP
-#	configurations are supported.
-#
-#	Example: dns_nameservers 10.0.0.1 192.172.0.4
-#
-#Default:
-# none
-
-#  TAG: hosts_file
-#	Location of the host-local IP name-address associations
-#	database. Most Operating Systems have such a file on different
-#	default locations:
-#	- Un*X & Linux:    /etc/hosts
-#	- Windows NT/2000: %SystemRoot%\system32\drivers\etc\hosts
-#			   (%SystemRoot% value install default is c:\winnt)
-#	- Windows XP/2003: %SystemRoot%\system32\drivers\etc\hosts
-#			   (%SystemRoot% value install default is c:\windows)
-#	- Windows 9x/Me:   %windir%\hosts
-#			   (%windir% value is usually c:\windows)
-#	- Cygwin:          /etc/hosts
-#
-#	The file contains newline-separated definitions, in the
-#	form ip_address_in_dotted_form name [name ...] names are
-#	whitespace-separated. Lines beginning with an hash (#)
-#	character are comments.
-#
-#	The file is checked at startup and upon configuration.
-#	If set to 'none', it won't be checked.
-#	If append_domain is used, that domain will be added to
-#	domain-local (i.e. not containing any dot character) host
-#	definitions.
-#
-#Default:
-# hosts_file /etc/hosts
-#
-hosts_file /etc/hosts
-
-#  TAG: dns_testnames
-#	The DNS tests exit as soon as the first site is successfully looked up
-#
-#	This test can be disabled with the -D command line option.
-#
-#Default:
-# dns_testnames netscape.com internic.net nlanr.net microsoft.com
-
-#  TAG: append_domain
-#	Appends local domain name to hostnames without any dots in
-#	them.  append_domain must begin with a period.
-#
-#	Be warned there are now Internet names with no dots in
-#	them using only top-domain names, so setting this may
-#	cause some Internet sites to become unavailable.
-#
-#Example:
-# append_domain .yourdomain.com
-#
-#Default:
-# none
-
-#  TAG: ignore_unknown_nameservers
-#	By default Squid checks that DNS responses are received
-#	from the same IP addresses they are sent to.  If they
-#	don't match, Squid ignores the response and writes a warning
-#	message to cache.log.  You can allow responses from unknown
-#	nameservers by setting this option to 'off'.
-#
-#Default:
-# ignore_unknown_nameservers on
-
-#  TAG: ipcache_size	(number of entries)
-#  TAG: ipcache_low	(percent)
-#  TAG: ipcache_high	(percent)
-#	The size, low-, and high-water marks for the IP cache.
-#
-#Default:
-# ipcache_size 1024
-# ipcache_low 90
-# ipcache_high 95
-
-#  TAG: fqdncache_size	(number of entries)
-#	Maximum number of FQDN cache entries.
-#
-#Default:
-# fqdncache_size 1024
-
-
-# MISCELLANEOUS
-# -----------------------------------------------------------------------------
-
-#  TAG: memory_pools	on|off
-#	If set, Squid will keep pools of allocated (but unused) memory
-#	available for future use.  If memory is a premium on your
-#	system and you believe your malloc library outperforms Squid
-#	routines, disable this.
-#
-#Default:
-# memory_pools on
-
-#  TAG: memory_pools_limit	(bytes)
-#	Used only with memory_pools on:
-#	memory_pools_limit 50 MB
-#
-#	If set to a non-zero value, Squid will keep at most the specified
-#	limit of allocated (but unused) memory in memory pools. All free()
-#	requests that exceed this limit will be handled by your malloc
-#	library. Squid does not pre-allocate any memory, just safe-keeps
-#	objects that otherwise would be free()d. Thus, it is safe to set
-#	memory_pools_limit to a reasonably high value even if your
-#	configuration will use less memory.
-#
-#	If set to zero, Squid will keep all memory it can. That is, there
-#	will be no limit on the total amount of memory used for safe-keeping.
-#
-#	To disable memory allocation optimization, do not set
-#	memory_pools_limit to 0. Set memory_pools to "off" instead.
-#
-#	An overhead for maintaining memory pools is not taken into account
-#	when the limit is checked. This overhead is close to four bytes per
-#	object kept. However, pools may actually _save_ memory because of
-#	reduced memory thrashing in your malloc library.
-#
-#Default:
-# memory_pools_limit 5 MB
-
-#  TAG: forwarded_for	on|off
-#	If set, Squid will include your system's IP address or name
-#	in the HTTP requests it forwards.  By default it looks like
-#	this:
-#
-#		X-Forwarded-For: 192.1.2.3
-#
-#	If you disable this, it will appear as
-#
-#		X-Forwarded-For: unknown
-#
-#Default:
-# forwarded_for on
-
-#  TAG: cachemgr_passwd
-#	Specify passwords for cachemgr operations.
-#
-#	Usage: cachemgr_passwd password action action ...
-#
-#	Some valid actions are (see cache manager menu for a full list):
-#		5min
-#		60min
-#		asndb
-#		authenticator
-#		cbdata
-#		client_list
-#		comm_incoming
-#		config *
-#		counters
-#		delay
-#		digest_stats
-#		dns
-#		events
-#		filedescriptors
-#		fqdncache
-#		histograms
-#		http_headers
-#		info
-#		io
-#		ipcache
-#		mem
-#		menu
-#		netdb
-#		non_peers
-#		objects
-#		offline_toggle *
-#		pconn
-#		peer_select
-#		reconfigure *
-#		redirector
-#		refresh
-#		server_list
-#		shutdown *
-#		store_digest
-#		storedir
-#		utilization
-#		via_headers
-#		vm_objects
-#
-#	* Indicates actions which will not be performed without a
-#	  valid password, others can be performed if not listed here.
-#
-#	To disable an action, set the password to "disable".
-#	To allow performing an action without a password, set the
-#	password to "none".
-#
-#	Use the keyword "all" to set the same password for all actions.
-#
-#Example:
-# cachemgr_passwd secret shutdown
-# cachemgr_passwd lesssssssecret info stats/objects
-# cachemgr_passwd disable all
-#
-#Default:
-# none
-
-#  TAG: client_db	on|off
-#	If you want to disable collecting per-client statistics,
-#	turn off client_db here.
-#
-#Default:
-# client_db on
-
-#  TAG: reload_into_ims	on|off
-#	When you enable this option, client no-cache or ``reload''
-#	requests will be changed to If-Modified-Since requests.
-#	Doing this VIOLATES the HTTP standard.  Enabling this
-#	feature could make you liable for problems which it
-#	causes.
-#
-#	see also refresh_pattern for a more selective approach.
-#
-#Default:
-# reload_into_ims off
-
-#  TAG: maximum_single_addr_tries
-#	This sets the maximum number of connection attempts for a
-#	host that only has one address (for multiple-address hosts,
-#	each address is tried once).
-#
-#	The default value is one attempt, the (not recommended)
-#	maximum is 255 tries.  A warning message will be generated
-#	if it is set to a value greater than ten.
-#
-#	Note: This is in addition to the request re-forwarding which
-#	takes place if Squid fails to get a satisfying response.
-#
-#Default:
-# maximum_single_addr_tries 1
-
-#  TAG: retry_on_error
-#	If set to on Squid will automatically retry requests when
-#	receiving an error response. This is mainly useful if you
-#	are in a complex cache hierarchy to work around access
-#	control errors.
-#
-#Default:
-# retry_on_error off
-
-#  TAG: as_whois_server
-#	WHOIS server to query for AS numbers.  NOTE: AS numbers are
-#	queried only when Squid starts up, not for every request.
-#
-#Default:
-# as_whois_server whois.ra.net
-# as_whois_server whois.ra.net
-
-#  TAG: offline_mode
-#	Enable this option and Squid will never try to validate cached
-#	objects.
-#
-#Default:
-# offline_mode off
-
-#  TAG: uri_whitespace
-#	What to do with requests that have whitespace characters in the
-#	URI.  Options:
-#
-#	strip:  The whitespace characters are stripped out of the URL.
-#		This is the behavior recommended by RFC2396.
-#	deny:   The request is denied.  The user receives an "Invalid
-#		Request" message.
-#	allow:  The request is allowed and the URI is not changed.  The
-#		whitespace characters remain in the URI.  Note the
-#		whitespace is passed to redirector processes if they
-#		are in use.
-#	encode:	The request is allowed and the whitespace characters are
-#		encoded according to RFC1738.  This could be considered
-#		a violation of the HTTP/1.1
-#		RFC because proxies are not allowed to rewrite URI's.
-#	chop:	The request is allowed and the URI is chopped at the
-#		first whitespace.  This might also be considered a
-#		violation.
-#
-#Default:
-# uri_whitespace strip
-
-#  TAG: coredump_dir
-#	By default Squid leaves core files in the directory from where
-#	it was started. If you set 'coredump_dir' to a directory
-#	that exists, Squid will chdir() to that directory at startup
-#	and coredump files will be left there.
-#
-#Default:
-# coredump_dir none
-#
-# Leave coredumps in the first cache dir
-coredump_dir /var/spool/squid
-
-#  TAG: chroot
-#	Use this to have Squid do a chroot() while initializing.  This
-#	also causes Squid to fully drop root privileges after
-#	initializing.  This means, for example, if you use a HTTP
-#	port less than 1024 and try to reconfigure, you will may get an
-#	error saying that Squid can not open the port.
-#
-#Default:
-# none
-
-#  TAG: balance_on_multiple_ip
-#	Some load balancing servers based on round robin DNS have been
-#	found not to preserve user session state across requests
-#	to different IP addresses.
-#
-#	By default Squid rotates IP's per request. By disabling
-#	this directive only connection failure triggers rotation.
-#
-#Default:
-# balance_on_multiple_ip on
-
-#  TAG: pipeline_prefetch
-#	To boost the performance of pipelined requests to closer
-#	match that of a non-proxied environment Squid can try to fetch
-#	up to two requests in parallel from a pipeline.
-#
-#	Defaults to off for bandwidth management and access logging
-#	reasons.
-#
-#Default:
-# pipeline_prefetch off
-
-#  TAG: high_response_time_warning	(msec)
-#	If the one-minute median response time exceeds this value,
-#	Squid prints a WARNING with debug level 0 to get the
-#	administrators attention.  The value is in milliseconds.
-#
-#Default:
-# high_response_time_warning 0
-
-#  TAG: high_page_fault_warning
-#	If the one-minute average page fault rate exceeds this
-#	value, Squid prints a WARNING with debug level 0 to get
-#	the administrators attention.  The value is in page faults
-#	per second.
-#
-#Default:
-# high_page_fault_warning 0
-
-#  TAG: high_memory_warning
-#	If the memory usage (as determined by mallinfo) exceeds
-#	this amount, Squid prints a WARNING with debug level 0 to get
-#	the administrators attention.
-#
-#Default:
-# high_memory_warning 0 KB
-
-#  TAG: sleep_after_fork	(microseconds)
-#	When this is set to a non-zero value, the main Squid process
-#	sleeps the specified number of microseconds after a fork()
-#	system call. This sleep may help the situation where your
-#	system reports fork() failures due to lack of (virtual)
-#	memory. Note, however, if you have a lot of child
-#	processes, these sleep delays will add up and your
-#	Squid will not service requests for some amount of time
-#	until all the child processes have been started.
-#	On Windows value less then 1000 (1 milliseconds) are
-#	rounded to 1000.
-#
-#Default:
-# sleep_after_fork 0
-
-#  TAG: zero_buffers	on|off
-#	Squid by default will zero all buffers before using or reusing them.
-# 	Setting this to 'off' will result in fixed-sized temporary buffers
-#	not being zero'ed. This may give a performance boost on certain
-#	platforms but it may result in undefined behaviour at the present
-#	time.
-#
-#Default:
-# zero_buffers on
-
-#  TAG: windows_ipaddrchangemonitor	on|off
-#	On Windows Squid by default will monitor IP address changes and will 
-#	reconfigure itself after any detected event. This is very useful for
-#	proxies connected to internet with dial-up interfaces.
-#	In some cases (a Proxy server acting as VPN gateway is one) it could be
-#	desiderable to disable this behaviour setting this to 'off'.
-#	Note: after changing this, Squid service must be restarted.
-#
-#Default:
-# windows_ipaddrchangemonitor on
-
diff --git a/etc/squid3/squid.conf b/etc/squid3/squid.conf
index 4173bbfd..d7b6fabe 100644
--- a/etc/squid3/squid.conf
+++ b/etc/squid3/squid.conf
@@ -1133,7 +1133,7 @@ http_access deny all
 #
 
 # Squid normally listens to port 3128
-http_port 3129
+http_port 3128
 
 #  TAG: https_port
 # Note: This option is only available if Squid is rebuilt with the
diff --git a/job-cfg/haskell-package-plan.yaml b/job-cfg/haskell-package-plan.yaml
index 69976122..de6bc548 100644
--- a/job-cfg/haskell-package-plan.yaml
+++ b/job-cfg/haskell-package-plan.yaml
@@ -68,6 +68,6 @@
         - '{name}':
             my_distro: 'sid'
             my_pkgs: 'cabal-install ghc dctrl-tools patchutils libtext-patch-perl libfile-slurp-perl  libipc-run-perl liblist-moreutils-perl libdpkg-perl'
-            my_shell: 'export http_proxy=http://localhost:3129; cabal update ; ./test-packages.pl' # h-p-p doesnt work with squid3, see https://github.com/haskell/HTTP/issues/68
+            my_shell: 'export http_proxy=http://localhost:3128; cabal update ; ./test-packages.pl'
             my_description: 'Haskell Metadata sanity checks'
             my_recipients: 'jenkins+debian-haskell qa-jenkins-scm@lists.alioth.debian.org pkg-haskell-maintainers@lists.alioth.debian.org'
diff --git a/update_jdn.sh b/update_jdn.sh
index 2ad6e16a..63f2a04f 100755
--- a/update_jdn.sh
+++ b/update_jdn.sh
@@ -170,6 +170,7 @@ if [ ./$0 -nt $STAMP ] || [ ! -f $STAMP ] ; then
 			shorewall \
 			shorewall6 \
 			sqlite3 \
+			squid3 \
 			subversion \
 			subversion-tools \
 			sudo \