summaryrefslogtreecommitdiffstats
path: root/etc/squid/squid.conf
diff options
context:
space:
mode:
Diffstat (limited to 'etc/squid/squid.conf')
-rw-r--r--etc/squid/squid.conf4953
1 files changed, 0 insertions, 4953 deletions
diff --git a/etc/squid/squid.conf b/etc/squid/squid.conf
deleted file mode 100644
index 94870637..00000000
--- a/etc/squid/squid.conf
+++ /dev/null
@@ -1,4953 +0,0 @@
-
-# WELCOME TO SQUID 2.7.STABLE9
-# ----------------------------
-#
-# This is the default Squid configuration file. You may wish
-# to look at the Squid home page (http://www.squid-cache.org/)
-# for the FAQ and other documentation.
-#
-# The default Squid config file shows what the defaults for
-# various options happen to be. If you don't need to change the
-# default, you shouldn't uncomment the line. Doing so may cause
-# run-time problems. In some cases "none" refers to no default
-# setting at all, while in other cases it refers to a valid
-# option - the comments for that keyword indicate if this is the
-# case.
-#
-
-
-# Configuration options can be included using the "include" directive.
-# Include takes a list of files to include. Quoting and wildcards is
-# supported.
-#
-# For example,
-#
-# include /path/to/included/file/squid.acl.config
-#
-# Includes can be nested up to a hard-coded depth of 16 levels.
-# This arbitrary restriction is to prevent recursive include references
-# from causing Squid entering an infinite loop whilst trying to load
-# configuration files.
-
-
-# OPTIONS FOR AUTHENTICATION
-# -----------------------------------------------------------------------------
-
-# TAG: auth_param
-# This is used to define parameters for the various authentication
-# schemes supported by Squid.
-#
-# format: auth_param scheme parameter [setting]
-#
-# The order in which authentication schemes are presented to the client is
-# dependent on the order the scheme first appears in config file. IE
-# has a bug (it's not RFC 2617 compliant) in that it will use the basic
-# scheme if basic is the first entry presented, even if more secure
-# schemes are presented. For now use the order in the recommended
-# settings section below. If other browsers have difficulties (don't
-# recognize the schemes offered even if you are using basic) either
-# put basic first, or disable the other schemes (by commenting out their
-# program entry).
-#
-# Once an authentication scheme is fully configured, it can only be
-# shutdown by shutting squid down and restarting. Changes can be made on
-# the fly and activated with a reconfigure. I.E. You can change to a
-# different helper, but not unconfigure the helper completely.
-#
-# Please note that while this directive defines how Squid processes
-# authentication it does not automatically activate authentication.
-# To use authentication you must in addition make use of ACLs based
-# on login name in http_access (proxy_auth, proxy_auth_regex or
-# external with %LOGIN used in the format tag). The browser will be
-# challenged for authentication on the first such acl encountered
-# in http_access processing and will also be re-challenged for new
-# login credentials if the request is being denied by a proxy_auth
-# type acl.
-#
-# WARNING: authentication can't be used in a transparently intercepting
-# proxy as the client then thinks it is talking to an origin server and
-# not the proxy. This is a limitation of bending the TCP/IP protocol to
-# transparently intercepting port 80, not a limitation in Squid.
-#
-# === Parameters for the basic scheme follow. ===
-#
-# "program" cmdline
-# Specify the command for the external authenticator. Such a program
-# reads a line containing "username password" and replies "OK" or
-# "ERR" in an endless loop. "ERR" responses may optionally be followed
-# by a error description available as %m in the returned error page.
-#
-# By default, the basic authentication scheme is not used unless a
-# program is specified.
-#
-# If you want to use the traditional proxy authentication, jump over to
-# the helpers/basic_auth/NCSA directory and type:
-# % make
-# % make install
-#
-# Then, set this line to something like
-#
-# auth_param basic program /usr/lib/squid/ncsa_auth /usr/etc/passwd
-#
-# "children" numberofchildren
-# The number of authenticator processes to spawn. If you start too few
-# squid will have to wait for them to process a backlog of credential
-# verifications, slowing it down. When credential verifications are
-# done via a (slow) network you are likely to need lots of
-# authenticator processes.
-# auth_param basic children 5
-#
-# "concurrency" numberofconcurrentrequests
-# The number of concurrent requests/channels the helper supports.
-# Changes the protocol used to include a channel number first on
-# the request/response line, allowing multiple requests to be sent
-# to the same helper in parallell without wating for the response.
-# Must not be set unless it's known the helper supports this.
-#
-# "realm" realmstring
-# Specifies the realm name which is to be reported to the client for
-# the basic proxy authentication scheme (part of the text the user
-# will see when prompted their username and password).
-# auth_param basic realm Squid proxy-caching web server
-#
-# "credentialsttl" timetolive
-# Specifies how long squid assumes an externally validated
-# username:password pair is valid for - in other words how often the
-# helper program is called for that user. Set this low to force
-# revalidation with short lived passwords. Note that setting this high
-# does not impact your susceptibility to replay attacks unless you are
-# using an one-time password system (such as SecureID). If you are using
-# such a system, you will be vulnerable to replay attacks unless you
-# also use the max_user_ip ACL in an http_access rule.
-# auth_param basic credentialsttl 2 hours
-#
-# "casesensitive" on|off
-# Specifies if usernames are case sensitive. Most user databases are
-# case insensitive allowing the same username to be spelled using both
-# lower and upper case letters, but some are case sensitive. This
-# makes a big difference for user_max_ip ACL processing and similar.
-# auth_param basic casesensitive off
-#
-# "blankpassword" on|off
-# Specifies if blank passwords should be supported. Defaults to off
-# as there is multiple authentication backends which handles blank
-# passwords as "guest" access.
-#
-# === Parameters for the digest scheme follow ===
-#
-# "program" cmdline
-# Specify the command for the external authenticator. Such a program
-# reads a line containing "username":"realm" and replies with the
-# appropriate H(A1) value hex encoded or ERR if the user (or his H(A1)
-# hash) does not exists. See RFC 2616 for the definition of H(A1).
-# "ERR" responses may optionally be followed by a error description
-# available as %m in the returned error page.
-#
-# By default, the digest authentication scheme is not used unless a
-# program is specified.
-#
-# If you want to use a digest authenticator, jump over to the
-# helpers/digest_auth/ directory and choose the authenticator to use.
-# It it's directory type
-# % make
-# % make install
-#
-# Then, set this line to something like
-#
-# auth_param digest program /usr/lib/squid/digest_auth_pw /usr/etc/digpass
-#
-# "children" numberofchildren
-# The number of authenticator processes to spawn. If you start too few
-# squid will have to wait for them to process a backlog of credential
-# verifications, slowing it down. When credential verifications are
-# done via a (slow) network you are likely to need lots of
-# authenticator processes.
-# auth_param digest children 5
-#
-# "concurrency" numberofconcurrentrequests
-# The number of concurrent requests/channels the helper supports.
-# Changes the protocol used to include a channel number first on
-# the request/response line, allowing multiple requests to be sent
-# to the same helper in parallell without wating for the response.
-# Must not be set unless it's known the helper supports this.
-#
-# "realm" realmstring
-# Specifies the realm name which is to be reported to the client for the
-# digest proxy authentication scheme (part of the text the user will see
-# when prompted their username and password).
-# auth_param digest realm Squid proxy-caching web server
-#
-# "nonce_garbage_interval" timeinterval
-# Specifies the interval that nonces that have been issued to clients are
-# checked for validity.
-# auth_param digest nonce_garbage_interval 5 minutes
-#
-# "nonce_max_duration" timeinterval
-# Specifies the maximum length of time a given nonce will be valid for.
-# auth_param digest nonce_max_duration 30 minutes
-#
-# "nonce_max_count" number
-# Specifies the maximum number of times a given nonce can be used.
-# auth_param digest nonce_max_count 50
-#
-# "nonce_strictness" on|off
-# Determines if squid requires strict increment-by-1 behavior for nonce
-# counts, or just incrementing (off - for use when useragents generate
-# nonce counts that occasionally miss 1 (ie, 1,2,4,6)).
-# auth_param digest nonce_strictness off
-#
-# "check_nonce_count" on|off
-# This directive if set to off can disable the nonce count check
-# completely to work around buggy digest qop implementations in certain
-# mainstream browser versions. Default on to check the nonce count to
-# protect from authentication replay attacks.
-# auth_param digest check_nonce_count on
-#
-# "post_workaround" on|off
-# This is a workaround to certain buggy browsers who sends an incorrect
-# request digest in POST requests when reusing the same nonce as acquired
-# earlier in response to a GET request.
-# auth_param digest post_workaround off
-#
-# === NTLM scheme options follow ===
-#
-# "program" cmdline
-# Specify the command for the external NTLM authenticator. Such a
-# program participates in the NTLMSSP exchanges between Squid and the
-# client and reads commands according to the Squid NTLMSSP helper
-# protocol. See helpers/ntlm_auth/ for details. Recommended ntlm
-# authenticator is ntlm_auth from Samba-3.X, but a number of other
-# ntlm authenticators is available.
-#
-# By default, the ntlm authentication scheme is not used unless a
-# program is specified.
-#
-# auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp
-#
-# "children" numberofchildren
-# The number of authenticator processes to spawn. If you start too few
-# squid will have to wait for them to process a backlog of credential
-# verifications, slowing it down. When credential verifications are
-# done via a (slow) network you are likely to need lots of
-# authenticator processes.
-# auth_param ntlm children 5
-#
-# "keep_alive" on|off
-# This option enables the use of keep-alive on the initial
-# authentication request. It has been reported some versions of MSIE
-# have problems if this is enabled, but performance will be increased
-# if enabled.
-#
-# auth_param ntlm keep_alive on
-#
-# === Negotiate scheme options follow ===
-#
-# "program" cmdline
-# Specify the command for the external Negotiate authenticator. Such a
-# program participates in the SPNEGO exchanges between Squid and the
-# client and reads commands according to the Squid ntlmssp helper
-# protocol. See helpers/ntlm_auth/ for details. Recommended SPNEGO
-# authenticator is ntlm_auth from Samba-4.X.
-#
-# By default, the Negotiate authentication scheme is not used unless a
-# program is specified.
-#
-# auth_param negotiate program /path/to/samba/bin/ntlm_auth --helper-protocol=gss-spnego
-#
-# "children" numberofchildren
-# The number of authenticator processes to spawn. If you start too few
-# squid will have to wait for them to process a backlog of credential
-# verifications, slowing it down. When credential verifications are
-# done via a (slow) network you are likely to need lots of
-# authenticator processes.
-# auth_param negotiate children 5
-#
-# "keep_alive" on|off
-# If you experience problems with PUT/POST requests when using the
-# Negotiate authentication scheme then you can try setting this to
-# off. This will cause Squid to forcibly close the connection on
-# the initial requests where the browser asks which schemes are
-# supported by the proxy.
-#
-# auth_param negotiate keep_alive on
-#
-#Recommended minimum configuration per scheme:
-#auth_param negotiate program <uncomment and complete this line to activate>
-#auth_param negotiate children 5
-#auth_param negotiate keep_alive on
-#auth_param ntlm program <uncomment and complete this line to activate>
-#auth_param ntlm children 5
-#auth_param ntlm keep_alive on
-#auth_param digest program <uncomment and complete this line>
-#auth_param digest children 5
-#auth_param digest realm Squid proxy-caching web server
-#auth_param digest nonce_garbage_interval 5 minutes
-#auth_param digest nonce_max_duration 30 minutes
-#auth_param digest nonce_max_count 50
-#auth_param basic program <uncomment and complete this line>
-#auth_param basic children 5
-#auth_param basic realm Squid proxy-caching web server
-#auth_param basic credentialsttl 2 hours
-#auth_param basic casesensitive off
-
-# TAG: authenticate_cache_garbage_interval
-# The time period between garbage collection across the username cache.
-# This is a tradeoff between memory utilization (long intervals - say
-# 2 days) and CPU (short intervals - say 1 minute). Only change if you
-# have good reason to.
-#
-#Default:
-# authenticate_cache_garbage_interval 1 hour
-
-# TAG: authenticate_ttl
-# The time a user & their credentials stay in the logged in user cache
-# since their last request. When the garbage interval passes, all user
-# credentials that have passed their TTL are removed from memory.
-#
-#Default:
-# authenticate_ttl 1 hour
-
-# TAG: authenticate_ip_ttl
-# If you use proxy authentication and the 'max_user_ip' ACL, this
-# directive controls how long Squid remembers the IP addresses
-# associated with each user. Use a small value (e.g., 60 seconds) if
-# your users might change addresses quickly, as is the case with
-# dialups. You might be safe using a larger value (e.g., 2 hours) in a
-# corporate LAN environment with relatively static address assignments.
-#
-#Default:
-# authenticate_ip_ttl 0 seconds
-
-# TAG: authenticate_ip_shortcircuit_ttl
-# Cache authentication credentials per client IP address for this
-# long. Default is 0 seconds (disabled).
-#
-# See also authenticate_ip_shortcircuit_access directive.
-#
-#Default:
-# authenticate_ip_shortcircuit_ttl 0 seconds
-
-
-# ACCESS CONTROLS
-# -----------------------------------------------------------------------------
-
-# TAG: external_acl_type
-# This option defines external acl classes using a helper program to
-# look up the status
-#
-# external_acl_type name [options] FORMAT.. /path/to/helper [helper arguments..]
-#
-# Options:
-#
-# ttl=n TTL in seconds for cached results (defaults to 3600
-# for 1 hour)
-# negative_ttl=n
-# TTL for cached negative lookups (default same
-# as ttl)
-# children=n number of processes spawn to service external acl
-# lookups of this type. (default 5).
-# concurrency=n concurrency level per process. Only used with helpers
-# capable of processing more than one query at a time.
-# Note: see compatibility note below
-# cache=n result cache size, 0 is unbounded (default)
-# grace= Percentage remaining of TTL where a refresh of a
-# cached entry should be initiated without needing to
-# wait for a new reply. (default 0 for no grace period)
-# protocol=2.5 Compatibility mode for Squid-2.5 external acl helpers
-#
-# FORMAT specifications
-#
-# %LOGIN Authenticated user login name
-# %EXT_USER Username from external acl
-# %IDENT Ident user name
-# %SRC Client IP
-# %SRCPORT Client source port
-# %URI Requested URI
-# %DST Requested host
-# %PROTO Requested protocol
-# %PORT Requested port
-# %METHOD Request method
-# %MYADDR Squid interface address
-# %MYPORT Squid http_port number
-# %PATH Requested URL-path (including query-string if any)
-# %USER_CERT SSL User certificate in PEM format
-# %USER_CERTCHAIN SSL User certificate chain in PEM format
-# %USER_CERT_xx SSL User certificate subject attribute xx
-# %USER_CA_xx SSL User certificate issuer attribute xx
-# %{Header} HTTP request header "Header"
-# %{Hdr:member} HTTP request header "Hdr" list member "member"
-# %{Hdr:;member}
-# HTTP request header list member using ; as
-# list separator. ; can be any non-alphanumeric
-# character.
-# %ACL The ACL name
-# %DATA The ACL arguments. If not used then any arguments
-# is automatically added at the end
-#
-# In addition to the above, any string specified in the referencing
-# acl will also be included in the helper request line, after the
-# specified formats (see the "acl external" directive)
-#
-# The helper receives lines per the above format specification,
-# and returns lines starting with OK or ERR indicating the validity
-# of the request and optionally followed by additional keywords with
-# more details.
-#
-# General result syntax:
-#
-# OK/ERR keyword=value ...
-#
-# Defined keywords:
-#
-# user= The users name (login also understood)
-# password= The users password (for PROXYPASS login= cache_peer)
-# message= Error message or similar used as %o in error messages
-# (error also understood)
-# log= String to be logged in access.log. Available as
-# %ea in logformat specifications
-#
-# If protocol=3.0 (the default) then URL escaping is used to protect
-# each value in both requests and responses.
-#
-# If using protocol=2.5 then all values need to be enclosed in quotes
-# if they may contain whitespace, or the whitespace escaped using \.
-# And quotes or \ characters within the keyword value must be \ escaped.
-#
-# When using the concurrency= option the protocol is changed by
-# introducing a query channel tag infront of the request/response.
-# The query channel tag is a number between 0 and concurrency-1.
-#
-# Compatibility Note: The children= option was named concurrency= in
-# Squid-2.5.STABLE3 and earlier, and was accepted as an alias for the
-# duration of the Squid-2.5 releases to keep compatibility. However,
-# the meaning of concurrency= option has changed in Squid-2.6 to match
-# that of Squid-3 and the old syntax no longer works.
-#
-#Default:
-# none
-
-# TAG: acl
-# Defining an Access List
-#
-# Every access list definition must begin with an aclname and acltype,
-# followed by either type-specific arguments or a quoted filename that
-# they are read from.
-#
-# acl aclname acltype argument ...
-# acl aclname acltype "file" ...
-#
-# when using "file", the file should contain one item per line.
-#
-# By default, regular expressions are CASE-SENSITIVE. To make
-# them case-insensitive, use the -i option.
-#
-# acl aclname src ip-address/netmask ... (clients IP address)
-# acl aclname src addr1-addr2/netmask ... (range of addresses)
-# acl aclname dst ip-address/netmask ... (URL host's IP address)
-# acl aclname myip ip-address/netmask ... (local socket IP address)
-#
-# acl aclname arp mac-address ... (xx:xx:xx:xx:xx:xx notation)
-# # The arp ACL requires the special configure option --enable-arp-acl.
-# # Furthermore, the arp ACL code is not portable to all operating systems.
-# # It works on Linux, Solaris, FreeBSD and some other *BSD variants.
-# #
-# # NOTE: Squid can only determine the MAC address for clients that are on
-# # the same subnet. If the client is on a different subnet, then Squid cannot
-# # find out its MAC address.
-#
-# acl aclname srcdomain .foo.com ... # reverse lookup, client IP
-# acl aclname dstdomain .foo.com ... # Destination server from URL
-# acl aclname srcdom_regex [-i] xxx ... # regex matching client name
-# acl aclname dstdom_regex [-i] xxx ... # regex matching server
-# # For dstdomain and dstdom_regex a reverse lookup is tried if a IP
-# # based URL is used and no match is found. The name "none" is used
-# # if the reverse lookup fails.
-#
-# acl aclname time [day-abbrevs] [h1:m1-h2:m2]
-# # day-abbrevs:
-# # S - Sunday
-# # M - Monday
-# # T - Tuesday
-# # W - Wednesday
-# # H - Thursday
-# # F - Friday
-# # A - Saturday
-# # h1:m1 must be less than h2:m2
-# acl aclname url_regex [-i] ^http:// ... # regex matching on whole URL
-# acl aclname urlpath_regex [-i] \.gif$ ... # regex matching on URL path
-# acl aclname urllogin [-i] [^a-zA-Z0-9] ... # regex matching on URL login field
-# acl aclname port 80 70 21 ...
-# acl aclname port 0-1024 ... # ranges allowed
-# acl aclname myport 3128 ... # (local socket TCP port)
-# acl aclname myportname 3128 ... # http(s)_port name
-# acl aclname proto HTTP FTP ...
-# acl aclname method GET POST ...
-# acl aclname browser [-i] regexp ...
-# # pattern match on User-Agent header (see also req_header below)
-# acl aclname referer_regex [-i] regexp ...
-# # pattern match on Referer header
-# # Referer is highly unreliable, so use with care
-# acl aclname ident username ...
-# acl aclname ident_regex [-i] pattern ...
-# # string match on ident output.
-# # use REQUIRED to accept any non-null ident.
-# acl aclname src_as number ...
-# acl aclname dst_as number ...
-# # Except for access control, AS numbers can be used for
-# # routing of requests to specific caches. Here's an
-# # example for routing all requests for AS#1241 and only
-# # those to mycache.mydomain.net:
-# # acl asexample dst_as 1241
-# # cache_peer_access mycache.mydomain.net allow asexample
-# # cache_peer_access mycache_mydomain.net deny all
-#
-# acl aclname proxy_auth [-i] username ...
-# acl aclname proxy_auth_regex [-i] pattern ...
-# # list of valid usernames
-# # use REQUIRED to accept any valid username.
-# #
-# # NOTE: when a Proxy-Authentication header is sent but it is not
-# # needed during ACL checking the username is NOT logged
-# # in access.log.
-# #
-# # NOTE: proxy_auth requires a EXTERNAL authentication program
-# # to check username/password combinations (see
-# # auth_param directive).
-# #
-# # NOTE: proxy_auth can't be used in a transparent proxy as
-# # the browser needs to be configured for using a proxy in order
-# # to respond to proxy authentication.
-#
-# acl aclname snmp_community string ...
-# # A community string to limit access to your SNMP Agent
-# # Example:
-# #
-# # acl snmppublic snmp_community public
-#
-# acl aclname maxconn number
-# # This will be matched when the client's IP address has
-# # more than <number> HTTP connections established.
-#
-# acl aclname max_user_ip [-s] number
-# # This will be matched when the user attempts to log in from more
-# # than <number> different ip addresses. The authenticate_ip_ttl
-# # parameter controls the timeout on the ip entries.
-# # If -s is specified the limit is strict, denying browsing
-# # from any further IP addresses until the ttl has expired. Without
-# # -s Squid will just annoy the user by "randomly" denying requests.
-# # (the counter is reset each time the limit is reached and a
-# # request is denied)
-# # NOTE: in acceleration mode or where there is mesh of child proxies,
-# # clients may appear to come from multiple addresses if they are
-# # going through proxy farms, so a limit of 1 may cause user problems.
-#
-# acl aclname req_mime_type mime-type ...
-# # regex match against the mime type of the request generated
-# # by the client. Can be used to detect file upload or some
-# # types HTTP tunneling requests.
-# # NOTE: This does NOT match the reply. You cannot use this
-# # to match the returned file type.
-#
-# acl aclname req_header header-name [-i] any\.regex\.here
-# # regex match against any of the known request headers. May be
-# # thought of as a superset of "browser", "referer" and "mime-type"
-# # ACLs.
-#
-# acl aclname rep_mime_type mime-type ...
-# # regex match against the mime type of the reply received by
-# # squid. Can be used to detect file download or some
-# # types HTTP tunneling requests.
-# # NOTE: This has no effect in http_access rules. It only has
-# # effect in rules that affect the reply data stream such as
-# # http_reply_access.
-#
-# acl aclname rep_header header-name [-i] any\.regex\.here
-# # regex match against any of the known reply headers. May be
-# # thought of as a superset of "browser", "referer" and "mime-type"
-# # ACLs.
-# #
-# # Example:
-# #
-# # acl many_spaces rep_header Content-Disposition -i [[:space:]]{3,}
-#
-# acl aclname external class_name [arguments...]
-# # external ACL lookup via a helper class defined by the
-# # external_acl_type directive.
-#
-# acl aclname urlgroup group1 ...
-# # match against the urlgroup as indicated by redirectors
-#
-# acl aclname user_cert attribute values...
-# # match against attributes in a user SSL certificate
-# # attribute is one of DN/C/O/CN/L/ST
-#
-# acl aclname ca_cert attribute values...
-# # match against attributes a users issuing CA SSL certificate
-# # attribute is one of DN/C/O/CN/L/ST
-#
-# acl aclname ext_user username ...
-# acl aclname ext_user_regex [-i] pattern ...
-# # string match on username returned by external acl helper
-# # use REQUIRED to accept any non-null user name.
-#
-#Examples:
-#acl macaddress arp 09:00:2b:23:45:67
-#acl myexample dst_as 1241
-#acl password proxy_auth REQUIRED
-#acl fileupload req_mime_type -i ^multipart/form-data$
-#acl javascript rep_mime_type -i ^application/x-javascript$
-#
-#Recommended minimum configuration:
-acl all src all
-acl manager proto cache_object
-acl localhost src 127.0.0.1/32
-acl to_localhost dst 127.0.0.0/8 0.0.0.0/32
-#
-# Example rule allowing access from your local networks.
-# Adapt to list your (internal) IP networks from where browsing
-# should be allowed
-acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
-acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
-acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
-#
-acl SSL_ports port 443 # https
-acl SSL_ports port 563 # snews
-acl SSL_ports port 873 # rsync
-acl Safe_ports port 80 # http
-acl Safe_ports port 21 # ftp
-acl Safe_ports port 443 # https
-acl Safe_ports port 70 # gopher
-acl Safe_ports port 210 # wais
-acl Safe_ports port 1025-65535 # unregistered ports
-acl Safe_ports port 280 # http-mgmt
-acl Safe_ports port 488 # gss-http
-acl Safe_ports port 591 # filemaker
-acl Safe_ports port 777 # multiling http
-acl Safe_ports port 631 # cups
-acl Safe_ports port 873 # rsync
-acl Safe_ports port 901 # SWAT
-acl purge method PURGE
-acl CONNECT method CONNECT
-
-# TAG: http_access
-# Allowing or Denying access based on defined access lists
-#
-# Access to the HTTP port:
-# http_access allow|deny [!]aclname ...
-#
-# NOTE on default values:
-#
-# If there are no "access" lines present, the default is to deny
-# the request.
-#
-# If none of the "access" lines cause a match, the default is the
-# opposite of the last line in the list. If the last line was
-# deny, the default is allow. Conversely, if the last line
-# is allow, the default will be deny. For these reasons, it is a
-# good idea to have an "deny all" or "allow all" entry at the end
-# of your access lists to avoid potential confusion.
-#
-#Default:
-# http_access deny all
-#
-#Recommended minimum configuration:
-#
-# Only allow cachemgr access from localhost
-http_access allow manager localhost
-http_access deny manager
-# Only allow purge requests from localhost
-http_access allow purge localhost
-http_access deny purge
-# Deny requests to unknown ports
-http_access deny !Safe_ports
-# Deny CONNECT to other than SSL ports
-http_access deny CONNECT !SSL_ports
-#
-# We strongly recommend the following be uncommented to protect innocent
-# web applications running on the proxy server who think the only
-# one who can access services on "localhost" is a local user
-#http_access deny to_localhost
-#
-# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
-
-# Example rule allowing access from your local networks.
-# Adapt localnet in the ACL section to list your (internal) IP networks
-# from where browsing should be allowed
-#http_access allow localnet
-http_access allow localhost
-
-# And finally deny all other access to this proxy
-http_access deny all
-
-# TAG: http_access2
-# Allowing or Denying access based on defined access lists
-#
-# Identical to http_access, but runs after redirectors. If not set
-# then only http_access is used.
-#
-#Default:
-# none
-
-# TAG: http_reply_access
-# Allow replies to client requests. This is complementary to http_access.
-#
-# http_reply_access allow|deny [!] aclname ...
-#
-# NOTE: if there are no access lines present, the default is to allow
-# all replies
-#
-# If none of the access lines cause a match the opposite of the
-# last line will apply. Thus it is good practice to end the rules
-# with an "allow all" or "deny all" entry.
-#
-#Default:
-# http_reply_access allow all
-
-# TAG: icp_access
-# Allowing or Denying access to the ICP port based on defined
-# access lists
-#
-# icp_access allow|deny [!]aclname ...
-#
-# See http_access for details
-#
-#Default:
-# icp_access deny all
-#
-#Allow ICP queries from local networks only
-icp_access allow localnet
-icp_access deny all
-
-# TAG: htcp_access
-# Allowing or Denying access to the HTCP port based on defined
-# access lists
-#
-# htcp_access allow|deny [!]aclname ...
-#
-# See http_access for details
-#
-# NOTE: The default if no htcp_access lines are present is to
-# deny all traffic. This default may cause problems with peers
-# using the htcp or htcp-oldsquid options.
-#
-#Default:
-# htcp_access deny all
-#
-#Allow HTCP queries from local networks only
-# htcp_access allow localnet
-# htcp_access deny all
-
-# TAG: htcp_clr_access
-# Allowing or Denying access to purge content using HTCP based
-# on defined access lists
-#
-# htcp_clr_access allow|deny [!]aclname ...
-#
-# See http_access for details
-#
-##Allow HTCP CLR requests from trusted peers
-#acl htcp_clr_peer src 172.16.1.2
-#htcp_clr_access allow htcp_clr_peer
-#
-#Default:
-# htcp_clr_access deny all
-
-# TAG: miss_access
-# Use to force your neighbors to use you as a sibling instead of
-# a parent. For example:
-#
-# acl localclients src 172.16.0.0/16
-# miss_access allow localclients
-# miss_access deny !localclients
-#
-# This means only your local clients are allowed to fetch
-# MISSES and all other clients can only fetch HITS.
-#
-# By default, allow all clients who passed the http_access rules
-# to fetch MISSES from us.
-#
-#Default setting:
-# miss_access allow all
-
-# TAG: ident_lookup_access
-# A list of ACL elements which, if matched, cause an ident
-# (RFC931) lookup to be performed for this request. For
-# example, you might choose to always perform ident lookups
-# for your main multi-user Unix boxes, but not for your Macs
-# and PCs. By default, ident lookups are not performed for
-# any requests.
-#
-# To enable ident lookups for specific client addresses, you
-# can follow this example:
-#
-# acl ident_aware_hosts src 198.168.1.0/255.255.255.0
-# ident_lookup_access allow ident_aware_hosts
-# ident_lookup_access deny all
-#
-# Only src type ACL checks are fully supported. A src_domain
-# ACL might work at times, but it will not always provide
-# the correct result.
-#
-#Default:
-# ident_lookup_access deny all
-
-# TAG: reply_body_max_size bytes deny acl acl...
-# This option specifies the maximum size of a reply body in bytes.
-# It can be used to prevent users from downloading very large files,
-# such as MP3's and movies. When the reply headers are received,
-# the reply_body_max_size lines are processed, and the first line with
-# a result of "deny" is used as the maximum body size for this reply.
-# This size is checked twice. First when we get the reply headers,
-# we check the content-length value. If the content length value exists
-# and is larger than the allowed size, the request is denied and the
-# user receives an error message that says "the request or reply
-# is too large." If there is no content-length, and the reply
-# size exceeds this limit, the client's connection is just closed
-# and they will receive a partial reply.
-#
-# WARNING: downstream caches probably can not detect a partial reply
-# if there is no content-length header, so they will cache
-# partial responses and give them out as hits. You should NOT
-# use this option if you have downstream caches.
-#
-# If you set this parameter to zero (the default), there will be
-# no limit imposed.
-#
-#Default:
-# reply_body_max_size 0 allow all
-
-# TAG: authenticate_ip_shortcircuit_access
-# Access list determining when shortcicuiting the authentication process
-# based on source IP cached credentials is acceptable. Use this to deny
-# using the ip auth cache on requests from child proxies or other source
-# ip's having multiple users.
-#
-# See also authenticate_ip_shortcircuit_ttl directive
-#
-#Default:
-# none
-
-
-# OPTIONS FOR X-Forwarded-For
-# -----------------------------------------------------------------------------
-
-# TAG: follow_x_forwarded_for
-# Allowing or Denying the X-Forwarded-For header to be followed to
-# find the original source of a request.
-#
-# Requests may pass through a chain of several other proxies
-# before reaching us. The X-Forwarded-For header will contain a
-# comma-separated list of the IP addresses in the chain, with the
-# rightmost address being the most recent.
-#
-# If a request reaches us from a source that is allowed by this
-# configuration item, then we consult the X-Forwarded-For header
-# to see where that host received the request from. If the
-# X-Forwarded-For header contains multiple addresses, and if
-# acl_uses_indirect_client is on, then we continue backtracking
-# until we reach an address for which we are not allowed to
-# follow the X-Forwarded-For header, or until we reach the first
-# address in the list. (If acl_uses_indirect_client is off, then
-# it's impossible to backtrack through more than one level of
-# X-Forwarded-For addresses.)
-#
-# The end result of this process is an IP address that we will
-# refer to as the indirect client address. This address may
-# be treated as the client address for access control, delay
-# pools and logging, depending on the acl_uses_indirect_client,
-# delay_pool_uses_indirect_client and log_uses_indirect_client
-# options.
-#
-# SECURITY CONSIDERATIONS:
-#
-# Any host for which we follow the X-Forwarded-For header
-# can place incorrect information in the header, and Squid
-# will use the incorrect information as if it were the
-# source address of the request. This may enable remote
-# hosts to bypass any access control restrictions that are
-# based on the client's source addresses.
-#
-# For example:
-#
-# acl localhost src 127.0.0.1
-# acl my_other_proxy srcdomain .proxy.example.com
-# follow_x_forwarded_for allow localhost
-# follow_x_forwarded_for allow my_other_proxy
-#
-#Default:
-# follow_x_forwarded_for deny all
-
-# TAG: acl_uses_indirect_client on|off
-# Controls whether the indirect client address
-# (see follow_x_forwarded_for) is used instead of the
-# direct client address in acl matching.
-#
-#Default:
-# acl_uses_indirect_client on
-
-# TAG: delay_pool_uses_indirect_client on|off
-# Controls whether the indirect client address
-# (see follow_x_forwarded_for) is used instead of the
-# direct client address in delay pools.
-#
-#Default:
-# delay_pool_uses_indirect_client on
-
-# TAG: log_uses_indirect_client on|off
-# Controls whether the indirect client address
-# (see follow_x_forwarded_for) is used instead of the
-# direct client address in the access log.
-#
-#Default:
-# log_uses_indirect_client on
-
-
-# SSL OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: ssl_unclean_shutdown
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Some browsers (especially MSIE) bugs out on SSL shutdown
-# messages.
-#
-#Default:
-# ssl_unclean_shutdown off
-
-# TAG: ssl_engine
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# The OpenSSL engine to use. You will need to set this if you
-# would like to use hardware SSL acceleration for example.
-#
-#Default:
-# none
-
-# TAG: sslproxy_client_certificate
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Client SSL Certificate to use when proxying https:// URLs
-#
-#Default:
-# none
-
-# TAG: sslproxy_client_key
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Client SSL Key to use when proxying https:// URLs
-#
-#Default:
-# none
-
-# TAG: sslproxy_version
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# SSL version level to use when proxying https:// URLs
-#
-#Default:
-# sslproxy_version 1
-
-# TAG: sslproxy_options
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# SSL engine options to use when proxying https:// URLs
-#
-#Default:
-# none
-
-# TAG: sslproxy_cipher
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# SSL cipher list to use when proxying https:// URLs
-#
-#Default:
-# none
-
-# TAG: sslproxy_cafile
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# file containing CA certificates to use when verifying server
-# certificates while proxying https:// URLs
-#
-#Default:
-# none
-
-# TAG: sslproxy_capath
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# directory containing CA certificates to use when verifying
-# server certificates while proxying https:// URLs
-#
-#Default:
-# none
-
-# TAG: sslproxy_flags
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Various flags modifying the use of SSL while proxying https:// URLs:
-# DONT_VERIFY_PEER Accept certificates even if they fail to
-# verify.
-# NO_DEFAULT_CA Don't use the default CA list built in
-# to OpenSSL.
-#
-#Default:
-# none
-
-# TAG: sslpassword_program
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Specify a program used for entering SSL key passphrases
-# when using encrypted SSL certificate keys. If not specified
-# keys must either be unencrypted, or Squid started with the -N
-# option to allow it to query interactively for the passphrase.
-#
-#Default:
-# none
-
-
-# NETWORK OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: http_port
-# Usage: port [options]
-# hostname:port [options]
-# 1.2.3.4:port [options]
-#
-# The socket addresses where Squid will listen for HTTP client
-# requests. You may specify multiple socket addresses.
-# There are three forms: port alone, hostname with port, and
-# IP address with port. If you specify a hostname or IP
-# address, Squid binds the socket to that specific
-# address. This replaces the old 'tcp_incoming_address'
-# option. Most likely, you do not need to bind to a specific
-# address, so you can use the port number alone.
-#
-# If you are running Squid in accelerator mode, you
-# probably want to listen on port 80 also, or instead.
-#
-# The -I command line option will override the *first* port
-# specified here.
-#
-# You may specify multiple socket addresses on multiple lines.
-#
-# Options:
-#
-# transparent Support for transparent interception of
-# outgoing requests without browser settings.
-#
-# tproxy Support Linux TPROXY for spoofing outgoing
-# connections using the client IP address.
-#
-# accel Accelerator mode. See also the related vhost,
-# vport and defaultsite directives.
-#
-# defaultsite=domainname
-# What to use for the Host: header if it is not present
-# in a request. Determines what site (not origin server)
-# accelerators should consider the default.
-# Defaults to visible_hostname:port if not set
-# May be combined with vport=NN to override the port number.
-# Implies accel.
-#
-# vhost Accelerator mode using Host header for virtual
-# domain support. Implies accel.
-#
-# vport Accelerator with IP based virtual host support.
-# Implies accel.
-#
-# vport=NN As above, but uses specified port number rather
-# than the http_port number. Implies accel.
-#
-# allow-direct Allow direct forwarding in accelerator mode. Normally
-# accelerated requests is denied direct forwarding as it
-# never_direct was used.
-#
-# urlgroup= Default urlgroup to mark requests with (see
-# also acl urlgroup and url_rewrite_program)
-#
-# protocol= Protocol to reconstruct accelerated requests with.
-# Defaults to http.
-#
-# no-connection-auth
-# Prevent forwarding of Microsoft connection oriented
-# authentication (NTLM, Negotiate and Kerberos)
-#
-# act-as-origin
-# Act is if this Squid is the origin server.
-# This currently means generate own Date: and
-# Expires: headers. Implies accel.
-#
-# http11 Enables HTTP/1.1 support to clients. The HTTP/1.1
-# support is still incomplete with an internal HTTP/1.0
-# hop, but should work with most clients. The main
-# HTTP/1.1 features missing due to this is forwarding
-# of requests using chunked transfer encoding (results
-# in 411) and forwarding of 1xx responses (silently
-# dropped)
-#
-# name= Specifies a internal name for the port. Defaults to
-# the port specification (port or addr:port)
-#
-# tcpkeepalive[=idle,interval,timeout]
-# Enable TCP keepalive probes of idle connections
-# idle is the initial time before TCP starts probing
-# the connection, interval how often to probe, and
-# timeout the time before giving up.
-#
-# If you run Squid on a dual-homed machine with an internal
-# and an external interface we recommend you to specify the
-# internal address:port in http_port. This way Squid will only be
-# visible on the internal address.
-#
-# Squid normally listens to port 3128
-http_port 3128
-
-# TAG: https_port
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Usage: [ip:]port cert=certificate.pem [key=key.pem] [options...]
-#
-# The socket address where Squid will listen for HTTPS client
-# requests.
-#
-# This is really only useful for situations where you are running
-# squid in accelerator mode and you want to do the SSL work at the
-# accelerator level.
-#
-# You may specify multiple socket addresses on multiple lines,
-# each with their own SSL certificate and/or options.
-#
-# Options:
-#
-# In addition to the options specified for http_port the folling
-# SSL related options is supported:
-#
-# cert= Path to SSL certificate (PEM format).
-#
-# key= Path to SSL private key file (PEM format)
-# if not specified, the certificate file is
-# assumed to be a combined certificate and
-# key file.
-#
-# version= The version of SSL/TLS supported
-# 1 automatic (default)
-# 2 SSLv2 only
-# 3 SSLv3 only
-# 4 TLSv1 only
-#
-# cipher= Colon separated list of supported ciphers.
-#
-# options= Various SSL engine options. The most important
-# being:
-# NO_SSLv2 Disallow the use of SSLv2
-# NO_SSLv3 Disallow the use of SSLv3
-# NO_TLSv1 Disallow the use of TLSv1
-# SINGLE_DH_USE Always create a new key when using
-# temporary/ephemeral DH key exchanges
-# See src/ssl_support.c or OpenSSL SSL_CTX_set_options
-# documentation for a complete list of options.
-#
-# clientca= File containing the list of CAs to use when
-# requesting a client certificate.
-#
-# cafile= File containing additional CA certificates to
-# use when verifying client certificates. If unset
-# clientca will be used.
-#
-# capath= Directory containing additional CA certificates
-# and CRL lists to use when verifying client certificates.
-#
-# crlfile= File of additional CRL lists to use when verifying
-# the client certificate, in addition to CRLs stored in
-# the capath. Implies VERIFY_CRL flag below.
-#
-# dhparams= File containing DH parameters for temporary/ephemeral
-# DH key exchanges.
-#
-# sslflags= Various flags modifying the use of SSL:
-# DELAYED_AUTH
-# Don't request client certificates
-# immediately, but wait until acl processing
-# requires a certificate (not yet implemented).
-# NO_DEFAULT_CA
-# Don't use the default CA lists built in
-# to OpenSSL.
-# NO_SESSION_REUSE
-# Don't allow for session reuse. Each connection
-# will result in a new SSL session.
-# VERIFY_CRL
-# Verify CRL lists when accepting client
-# certificates.
-# VERIFY_CRL_ALL
-# Verify CRL lists for all certificates in the
-# client certificate chain.
-#
-# sslcontext= SSL session ID context identifier.
-#
-#
-#Default:
-# none
-
-# TAG: tcp_outgoing_tos
-# Allows you to select a TOS/Diffserv value to mark outgoing
-# connections with, based on the username or source address
-# making the request.
-#
-# tcp_outgoing_tos ds-field [!]aclname ...
-#
-# Example where normal_service_net uses the TOS value 0x00
-# and good_service_net uses 0x20
-#
-# acl normal_service_net src 10.0.0.0/255.255.255.0
-# acl good_service_net src 10.0.1.0/255.255.255.0
-# tcp_outgoing_tos 0x00 normal_service_net
-# tcp_outgoing_tos 0x20 good_service_net
-#
-# TOS/DSCP values really only have local significance - so you should
-# know what you're specifying. For more information, see RFC2474 and
-# RFC3260.
-#
-# The TOS/DSCP byte must be exactly that - a octet value 0 - 255, or
-# "default" to use whatever default your host has. Note that in
-# practice often only values 0 - 63 is usable as the two highest bits
-# have been redefined for use by ECN (RFC3168).
-#
-# Processing proceeds in the order specified, and stops at first fully
-# matching line.
-#
-# Note: The use of this directive using client dependent ACLs is
-# incompatible with the use of server side persistent connections. To
-# ensure correct results it is best to set server_persisten_connections
-# to off when using this directive in such configurations.
-#
-#Default:
-# none
-
-# TAG: tcp_outgoing_address
-# Allows you to map requests to different outgoing IP addresses
-# based on the username or source address of the user making
-# the request.
-#
-# tcp_outgoing_address ipaddr [[!]aclname] ...
-#
-# Example where requests from 10.0.0.0/24 will be forwarded
-# with source address 10.1.0.1, 10.0.2.0/24 forwarded with
-# source address 10.1.0.2 and the rest will be forwarded with
-# source address 10.1.0.3.
-#
-# acl normal_service_net src 10.0.0.0/24
-# acl good_service_net src 10.0.1.0/24 10.0.2.0/24
-# tcp_outgoing_address 10.1.0.1 normal_service_net
-# tcp_outgoing_address 10.1.0.2 good_service_net
-# tcp_outgoing_address 10.1.0.3
-#
-# Processing proceeds in the order specified, and stops at first fully
-# matching line.
-#
-# Note: The use of this directive using client dependent ACLs is
-# incompatible with the use of server side persistent connections. To
-# ensure correct results it is best to set server_persistent_connections
-# to off when using this directive in such configurations.
-#
-#Default:
-# none
-
-# TAG: zph_mode
-# This option enables packet level marking of HIT/MISS responses,
-# either using IP TOS or socket priority.
-# off Feature disabled
-# tos Set the IP TOS/Diffserv field
-# priority Set the socket priority (may get mapped to TOS by OS,
-# otherwise only usable in local rulesets)
-# option Embed the mark in an IP option field. See also
-# zph_option.
-#
-# See also tcp_outgoing_tos for details/requirements about TOS usage.
-#
-#Default:
-# zph_mode off
-
-# TAG: zph_local
-# Allows you to select a TOS/Diffserv/Priority value to mark local hits.
-# Default: 0 (disabled).
-#
-#Default:
-# zph_local 0
-
-# TAG: zph_sibling
-# Allows you to select a TOS/Diffserv/Priority value to mark sibling hits.
-# Default: 0 (disabled).
-#
-#Default:
-# zph_sibling 0
-
-# TAG: zph_parent
-# Allows you to select a TOS/Diffserv/Priority value to mark parent hits.
-# Default: 0 (disabled).
-#
-#Default:
-# zph_parent 0
-
-# TAG: zph_option
-# The IP option to use when zph_mode is set to "option". Defaults to
-# 136 which is officially registered as "SATNET Stream ID".
-#
-#Default:
-# zph_option 136
-
-
-# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM
-# -----------------------------------------------------------------------------
-
-# TAG: cache_peer
-# To specify other caches in a hierarchy, use the format:
-#
-# cache_peer hostname type http-port icp-port [options]
-#
-# For example,
-#
-# # proxy icp
-# # hostname type port port options
-# # -------------------- -------- ----- ----- -----------
-# cache_peer parent.foo.net parent 3128 3130 proxy-only default
-# cache_peer sib1.foo.net sibling 3128 3130 proxy-only
-# cache_peer sib2.foo.net sibling 3128 3130 proxy-only
-#
-# type: either 'parent', 'sibling', or 'multicast'.
-#
-# proxy-port: The port number where the cache listens for proxy
-# requests.
-#
-# icp-port: Used for querying neighbor caches about
-# objects. To have a non-ICP neighbor
-# specify '7' for the ICP port and make sure the
-# neighbor machine has the UDP echo port
-# enabled in its /etc/inetd.conf file.
-# NOTE: Also requires icp_port option enabled to send/receive
-# requests via this method.
-#
-# options: proxy-only
-# weight=n
-# ttl=n
-# no-query
-# default
-# round-robin
-# carp
-# multicast-responder
-# multicast-siblings
-# closest-only
-# no-digest
-# no-netdb-exchange
-# no-delay
-# login=user:password | PASS | *:password
-# connect-timeout=nn
-# digest-url=url
-# allow-miss
-# max-conn=n
-# htcp
-# htcp-oldsquid
-# originserver
-# userhash
-# sourcehash
-# name=xxx
-# monitorurl=url
-# monitorsize=sizespec
-# monitorinterval=seconds
-# monitortimeout=seconds
-# forceddomain=name
-# ssl
-# sslcert=/path/to/ssl/certificate
-# sslkey=/path/to/ssl/key
-# sslversion=1|2|3|4
-# sslcipher=...
-# ssloptions=...
-# front-end-https[=on|auto]
-# connection-auth[=on|off|auto]
-# idle=n
-# http11
-#
-# use 'proxy-only' to specify objects fetched
-# from this cache should not be saved locally.
-#
-# use 'weight=n' to affect the selection of a peer
-# during any weighted peer-selection mechanisms.
-# The weight must be an integer; default is 1,
-# larger weights are favored more.
-# This option does not affect parent selection if a peering
-# protocol is not in use.
-#
-# use 'ttl=n' to specify a IP multicast TTL to use
-# when sending an ICP queries to this address.
-# Only useful when sending to a multicast group.
-# Because we don't accept ICP replies from random
-# hosts, you must configure other group members as
-# peers with the 'multicast-responder' option below.
-#
-# use 'no-query' to NOT send ICP queries to this
-# neighbor.
-#
-# use 'default' if this is a parent cache which can
-# be used as a "last-resort" if a peer cannot be located
-# by any of the peer-selection mechanisms.
-# If specified more than once, only the first is used.
-#
-# use 'round-robin' to define a set of parents which
-# should be used in a round-robin fashion in the
-# absence of any ICP queries.
-#
-# use 'carp' to define a set of parents which should
-# be used as a CARP array. The requests will be
-# distributed among the parents based on the CARP load
-# balancing hash function based on their weight.
-#
-# 'multicast-responder' indicates the named peer
-# is a member of a multicast group. ICP queries will
-# not be sent directly to the peer, but ICP replies
-# will be accepted from it.
-#
-# the 'multicast-siblings' option is meant to be used
-# only for cache peers of type "multicast". It instructs
-# Squid that ALL members of this multicast group have
-# "sibling" relationship with it, not "parent". This is
-# an optimization that avoids useless multicast queries
-# to a multicast group when the requested object would
-# be fetched only from a "parent" cache, anyway. It's
-# useful, e.g., when configuring a pool of redundant
-# Squid proxies, being members of the same
-# multicast group.
-#
-# 'closest-only' indicates that, for ICP_OP_MISS
-# replies, we'll only forward CLOSEST_PARENT_MISSes
-# and never FIRST_PARENT_MISSes.
-#
-# use 'no-digest' to NOT request cache digests from
-# this neighbor.
-#
-# 'no-netdb-exchange' disables requesting ICMP
-# RTT database (NetDB) from the neighbor.
-#
-# use 'no-delay' to prevent access to this neighbor
-# from influencing the delay pools.
-#
-# use 'login=user:password' if this is a personal/workgroup
-# proxy and your parent requires proxy authentication.
-# Note: The string can include URL escapes (i.e. %20 for
-# spaces). This also means % must be written as %%.
-#
-# use 'login=PASS' if users must authenticate against
-# the upstream proxy or in the case of a reverse proxy
-# configuration, the origin web server. This will pass
-# the users credentials as they are to the peer.
-# Note: To combine this with local authentication the Basic
-# authentication scheme must be used, and both servers must
-# share the same user database as HTTP only allows for
-# a single login (one for proxy, one for origin server).
-# Also be warned this will expose your users proxy
-# password to the peer. USE WITH CAUTION
-#
-# use 'login=*:password' to pass the username to the
-# upstream cache, but with a fixed password. This is meant
-# to be used when the peer is in another administrative
-# domain, but it is still needed to identify each user.
-# The star can optionally be followed by some extra
-# information which is added to the username. This can
-# be used to identify this proxy to the peer, similar to
-# the login=username:password option above.
-#
-# use 'connect-timeout=nn' to specify a peer
-# specific connect timeout (also see the
-# peer_connect_timeout directive)
-#
-# use 'digest-url=url' to tell Squid to fetch the cache
-# digest (if digests are enabled) for this host from
-# the specified URL rather than the Squid default
-# location.
-#
-# use 'allow-miss' to disable Squid's use of only-if-cached
-# when forwarding requests to siblings. This is primarily
-# useful when icp_hit_stale is used by the sibling. To
-# extensive use of this option may result in forwarding
-# loops, and you should avoid having two-way peerings
-# with this option. (for example to deny peer usage on
-# requests from peer by denying cache_peer_access if the
-# source is a peer)
-#
-# use 'max-conn=n' to limit the amount of connections Squid
-# may open to this peer.
-#
-# use 'htcp' to send HTCP, instead of ICP, queries
-# to the neighbor. You probably also want to
-# set the "icp port" to 4827 instead of 3130.
-# You must also allow this Squid htcp_access and
-# http_access in the peer Squid configuration.
-#
-# use 'htcp-oldsquid' to send HTCP to old Squid versions
-# You must also allow this Squid htcp_access and
-# http_access in the peer Squid configuration.
-#
-# 'originserver' causes this parent peer to be contacted as
-# a origin server. Meant to be used in accelerator setups.
-#
-# use 'userhash' to load-balance amongst a set of parents
-# based on the client proxy_auth or ident username.
-#
-# use 'sourcehash' to load-balance amongst a set of parents
-# based on the client source ip.
-#
-# use 'name=xxx' if you have multiple peers on the same
-# host but different ports. This name can be used to
-# differentiate the peers in cache_peer_access and similar
-# directives.
-#
-# use 'monitorurl=url' to have periodically request a given
-# URL from the peer, and only consider the peer as alive
-# if this monitoring is successful (default none)
-#
-# use 'monitorsize=min[-max]' to limit the size range of
-# 'monitorurl' replies considered valid. Defaults to 0 to
-# accept any size replies as valid.
-#
-# use 'monitorinterval=seconds' to change frequency of
-# how often the peer is monitored with 'monitorurl'
-# (default 300 for a 5 minute interval). If set to 0
-# then monitoring is disabled even if a URL is defined.
-#
-# use 'monitortimeout=seconds' to change the timeout of
-# 'monitorurl'. Defaults to 'monitorinterval'.
-#
-# use 'forceddomain=name' to forcibly set the Host header
-# of requests forwarded to this peer. Useful in accelerator
-# setups where the server (peer) expects a certain domain
-# name and using redirectors to feed this domain name
-# is not feasible.
-#
-# use 'ssl' to indicate connections to this peer should
-# be SSL/TLS encrypted.
-#
-# use 'sslcert=/path/to/ssl/certificate' to specify a client
-# SSL certificate to use when connecting to this peer.
-#
-# use 'sslkey=/path/to/ssl/key' to specify the private SSL
-# key corresponding to sslcert above. If 'sslkey' is not
-# specified 'sslcert' is assumed to reference a
-# combined file containing both the certificate and the key.
-#
-# use sslversion=1|2|3|4 to specify the SSL version to use
-# when connecting to this peer
-# 1 = automatic (default)
-# 2 = SSL v2 only
-# 3 = SSL v3 only
-# 4 = TLS v1 only
-#
-# use sslcipher=... to specify the list of valid SSL ciphers
-# to use when connecting to this peer.
-#
-# use ssloptions=... to specify various SSL engine options:
-# NO_SSLv2 Disallow the use of SSLv2
-# NO_SSLv3 Disallow the use of SSLv3
-# NO_TLSv1 Disallow the use of TLSv1
-# See src/ssl_support.c or the OpenSSL documentation for
-# a more complete list.
-#
-# use sslcafile=... to specify a file containing
-# additional CA certificates to use when verifying the
-# peer certificate.
-#
-# use sslcapath=... to specify a directory containing
-# additional CA certificates to use when verifying the
-# peer certificate.
-#
-# use sslcrlfile=... to specify a certificate revocation
-# list file to use when verifying the peer certificate.
-#
-# use sslflags=... to specify various flags modifying the
-# SSL implementation:
-# DONT_VERIFY_PEER
-# Accept certificates even if they fail to
-# verify.
-# NO_DEFAULT_CA
-# Don't use the default CA list built in
-# to OpenSSL.
-#
-# use ssldomain= to specify the peer name as advertised
-# in it's certificate. Used for verifying the correctness
-# of the received peer certificate. If not specified the
-# peer hostname will be used.
-#
-# use front-end-https to enable the "Front-End-Https: On"
-# header needed when using Squid as a SSL frontend in front
-# of Microsoft OWA. See MS KB document Q307347 for details
-# on this header. If set to auto the header will
-# only be added if the request is forwarded as a https://
-# URL.
-#
-# use connection-auth=off to tell Squid that this peer does
-# not support Microsoft connection oriented authentication,
-# and any such challenges received from there should be
-# ignored. Default is auto to automatically determine the
-# status of the peer.
-#
-# use idle=n to specify a minimum number of idle connections
-# that should be kept open to this peer.
-#
-# use http11 to send requests using HTTP/1.1 to this peer.
-# Note: The HTTP/1.1 support is still incomplete, with an
-# internal HTTP/1.0 hop. As result 1xx responses will not
-# be forwarded.
-#
-#Default:
-# none
-
-# TAG: cache_peer_domain
-# Use to limit the domains for which a neighbor cache will be
-# queried. Usage:
-#
-# cache_peer_domain cache-host domain [domain ...]
-# cache_peer_domain cache-host !domain
-#
-# For example, specifying
-#
-# cache_peer_domain parent.foo.net .edu
-#
-# has the effect such that UDP query packets are sent to
-# 'bigserver' only when the requested object exists on a
-# server in the .edu domain. Prefixing the domain name
-# with '!' means the cache will be queried for objects
-# NOT in that domain.
-#
-# NOTE: * Any number of domains may be given for a cache-host,
-# either on the same or separate lines.
-# * When multiple domains are given for a particular
-# cache-host, the first matched domain is applied.
-# * Cache hosts with no domain restrictions are queried
-# for all requests.
-# * There are no defaults.
-# * There is also a 'cache_peer_access' tag in the ACL
-# section.
-#
-#Default:
-# none
-
-# TAG: cache_peer_access
-# Similar to 'cache_peer_domain' but provides more flexibility by
-# using ACL elements.
-#
-# cache_peer_access cache-host allow|deny [!]aclname ...
-#
-# The syntax is identical to 'http_access' and the other lists of
-# ACL elements. See the comments for 'http_access' below, or
-# the Squid FAQ (http://www.squid-cache.org/FAQ/FAQ-10.html).
-#
-#Default:
-# none
-
-# TAG: neighbor_type_domain
-# usage: neighbor_type_domain neighbor parent|sibling domain domain ...
-#
-# Modifying the neighbor type for specific domains is now
-# possible. You can treat some domains differently than the the
-# default neighbor type specified on the 'cache_peer' line.
-# Normally it should only be necessary to list domains which
-# should be treated differently because the default neighbor type
-# applies for hostnames which do not match domains listed here.
-#
-#EXAMPLE:
-# cache_peer cache.foo.org parent 3128 3130
-# neighbor_type_domain cache.foo.org sibling .com .net
-# neighbor_type_domain cache.foo.org sibling .au .de
-#
-#Default:
-# none
-
-# TAG: dead_peer_timeout (seconds)
-# This controls how long Squid waits to declare a peer cache
-# as "dead." If there are no ICP replies received in this
-# amount of time, Squid will declare the peer dead and not
-# expect to receive any further ICP replies. However, it
-# continues to send ICP queries, and will mark the peer as
-# alive upon receipt of the first subsequent ICP reply.
-#
-# This timeout also affects when Squid expects to receive ICP
-# replies from peers. If more than 'dead_peer' seconds have
-# passed since the last ICP reply was received, Squid will not
-# expect to receive an ICP reply on the next query. Thus, if
-# your time between requests is greater than this timeout, you
-# will see a lot of requests sent DIRECT to origin servers
-# instead of to your parents.
-#
-#Default:
-# dead_peer_timeout 10 seconds
-
-# TAG: hierarchy_stoplist
-# A list of words which, if found in a URL, cause the object to
-# be handled directly by this cache. In other words, use this
-# to not query neighbor caches for certain objects. You may
-# list this option multiple times. Note: never_direct overrides
-# this option.
-#We recommend you to use at least the following line.
-hierarchy_stoplist cgi-bin ?
-
-
-# MEMORY CACHE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: cache_mem (bytes)
-# NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE.
-# IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL
-# USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER
-# THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS.
-#
-# 'cache_mem' specifies the ideal amount of memory to be used
-# for:
-# * In-Transit objects
-# * Hot Objects
-# * Negative-Cached objects
-#
-# Data for these objects are stored in 4 KB blocks. This
-# parameter specifies the ideal upper limit on the total size of
-# 4 KB blocks allocated. In-Transit objects take the highest
-# priority.
-#
-# In-transit objects have priority over the others. When
-# additional space is needed for incoming data, negative-cached
-# and hot objects will be released. In other words, the
-# negative-cached and hot objects will fill up any unused space
-# not needed for in-transit objects.
-#
-# If circumstances require, this limit will be exceeded.
-# Specifically, if your incoming request rate requires more than
-# 'cache_mem' of memory to hold in-transit objects, Squid will
-# exceed this limit to satisfy the new requests. When the load
-# decreases, blocks will be freed until the high-water mark is
-# reached. Thereafter, blocks will be used to store hot
-# objects.
-#
-#Default:
-# cache_mem 8 MB
-
-# TAG: maximum_object_size_in_memory (bytes)
-# Objects greater than this size will not be attempted to kept in
-# the memory cache. This should be set high enough to keep objects
-# accessed frequently in memory to improve performance whilst low
-# enough to keep larger objects from hoarding cache_mem.
-#
-#Default:
-# maximum_object_size_in_memory 8 KB
-
-# TAG: memory_replacement_policy
-# The memory replacement policy parameter determines which
-# objects are purged from memory when memory space is needed.
-#
-# See cache_replacement_policy for details.
-#
-#Default:
-# memory_replacement_policy lru
-
-
-# DISK CACHE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: cache_replacement_policy
-# The cache replacement policy parameter determines which
-# objects are evicted (replaced) when disk space is needed.
-#
-# lru : Squid's original list based LRU policy
-# heap GDSF : Greedy-Dual Size Frequency
-# heap LFUDA: Least Frequently Used with Dynamic Aging
-# heap LRU : LRU policy implemented using a heap
-#
-# Applies to any cache_dir lines listed below this.
-#
-# The LRU policies keeps recently referenced objects.
-#
-# The heap GDSF policy optimizes object hit rate by keeping smaller
-# popular objects in cache so it has a better chance of getting a
-# hit. It achieves a lower byte hit rate than LFUDA though since
-# it evicts larger (possibly popular) objects.
-#
-# The heap LFUDA policy keeps popular objects in cache regardless of
-# their size and thus optimizes byte hit rate at the expense of
-# hit rate since one large, popular object will prevent many
-# smaller, slightly less popular objects from being cached.
-#
-# Both policies utilize a dynamic aging mechanism that prevents
-# cache pollution that can otherwise occur with frequency-based
-# replacement policies.
-#
-# NOTE: if using the LFUDA replacement policy you should increase
-# the value of maximum_object_size above its default of 4096 KB to
-# to maximize the potential byte hit rate improvement of LFUDA.
-#
-# For more information about the GDSF and LFUDA cache replacement
-# policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html
-# and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html.
-#
-#Default:
-# cache_replacement_policy lru
-
-# TAG: cache_dir
-# Usage:
-#
-# cache_dir Type Directory-Name Fs-specific-data [options]
-#
-# You can specify multiple cache_dir lines to spread the
-# cache among different disk partitions.
-#
-# Type specifies the kind of storage system to use. Only "ufs"
-# is built by default. To enable any of the other storage systems
-# see the --enable-storeio configure option.
-#
-# 'Directory' is a top-level directory where cache swap
-# files will be stored. If you want to use an entire disk
-# for caching, this can be the mount-point directory.
-# The directory must exist and be writable by the Squid
-# process. Squid will NOT create this directory for you.
-# Only using COSS, a raw disk device or a stripe file can
-# be specified, but the configuration of the "cache_swap_log"
-# tag is mandatory.
-#
-# The ufs store type:
-#
-# "ufs" is the old well-known Squid storage format that has always
-# been there.
-#
-# cache_dir ufs Directory-Name Mbytes L1 L2 [options]
-#
-# 'Mbytes' is the amount of disk space (MB) to use under this
-# directory. The default is 100 MB. Change this to suit your
-# configuration. Do NOT put the size of your disk drive here.
-# Instead, if you want Squid to use the entire disk drive,
-# subtract 20% and use that value.
-#
-# 'Level-1' is the number of first-level subdirectories which
-# will be created under the 'Directory'. The default is 16.
-#
-# 'Level-2' is the number of second-level subdirectories which
-# will be created under each first-level directory. The default
-# is 256.
-#
-# The aufs store type:
-#
-# "aufs" uses the same storage format as "ufs", utilizing
-# POSIX-threads to avoid blocking the main Squid process on
-# disk-I/O. This was formerly known in Squid as async-io.
-#
-# cache_dir aufs Directory-Name Mbytes L1 L2 [options]
-#
-# see argument descriptions under ufs above
-#
-# The diskd store type:
-#
-# "diskd" uses the same storage format as "ufs", utilizing a
-# separate process to avoid blocking the main Squid process on
-# disk-I/O.
-#
-# cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n]
-#
-# see argument descriptions under ufs above
-#
-# Q1 specifies the number of unacknowledged I/O requests when Squid
-# stops opening new files. If this many messages are in the queues,
-# Squid won't open new files. Default is 64
-#
-# Q2 specifies the number of unacknowledged messages when Squid
-# starts blocking. If this many messages are in the queues,
-# Squid blocks until it receives some replies. Default is 72
-#
-# When Q1 < Q2 (the default), the cache directory is optimized
-# for lower response time at the expense of a decrease in hit
-# ratio. If Q1 > Q2, the cache directory is optimized for
-# higher hit ratio at the expense of an increase in response
-# time.
-#
-# The coss store type:
-#
-# block-size=n defines the "block size" for COSS cache_dir's.
-# Squid uses file numbers as block numbers. Since file numbers
-# are limited to 24 bits, the block size determines the maximum
-# size of the COSS partition. The default is 512 bytes, which
-# leads to a maximum cache_dir size of 512<<24, or 8 GB. Note
-# you should not change the COSS block size after Squid
-# has written some objects to the cache_dir.
-#
-# overwrite-percent=n defines the percentage of disk that COSS
-# must write to before a given object will be moved to the
-# current stripe. A value of "n" closer to 100 will cause COSS
-# to waste less disk space by having multiple copies of an object
-# on disk, but will increase the chances of overwriting a popular
-# object as COSS overwrites stripes. A value of "n" close to 0
-# will cause COSS to keep all current objects in the current COSS
-# stripe at the expense of the hit rate. The default value of 50
-# will allow any given object to be stored on disk a maximum of
-# 2 times.
-#
-# max-stripe-waste=n defines the maximum amount of space that COSS
-# will waste in a given stripe (in bytes). When COSS writes data
-# to disk, it will potentially waste up to "max-size" worth of disk
-# space for each 1MB of data written. If "max-size" is set to a
-# large value (ie >256k), this could potentially result in large
-# amounts of wasted disk space. Setting this value to a lower value
-# (ie 64k or 32k) will result in a COSS disk refusing to cache
-# larger objects until the COSS stripe has been filled to within
-# "max-stripe-waste" of the maximum size (1MB).
-#
-# membufs=n defines the number of "memory-only" stripes that COSS
-# will use. When an cache hit is performed on a COSS stripe before
-# COSS has reached the overwrite-percent value for that object,
-# COSS will use a series of memory buffers to hold the object in
-# while the data is sent to the client. This will define the maximum
-# number of memory-only buffers that COSS will use. The default value
-# is 10, which will use a maximum of 10MB of memory for buffers.
-#
-# maxfullbufs=n defines the maximum number of stripes a COSS partition
-# will have in memory waiting to be freed (either because the disk is
-# under load and the stripe is unwritten, or because clients are still
-# transferring data from objects using the memory). In order to try
-# and maintain a good hit rate under load, COSS will reserve the last
-# 2 full stripes for object hits. (ie a COSS cache_dir will reject
-# new objects when the number of full stripes is 2 less than maxfullbufs)
-#
-# The null store type:
-#
-# no options are allowed or required
-#
-# Common options:
-#
-# no-store, no new objects should be stored to this cache_dir
-#
-# min-size=n, refers to the min object size this storedir will accept.
-# It's used to restrict a storedir to only store large objects
-# (e.g. aufs) while other storedirs are optimized for smaller objects
-# (e.g. COSS). Defaults to 0.
-#
-# max-size=n, refers to the max object size this storedir supports.
-# It is used to initially choose the storedir to dump the object.
-# Note: To make optimal use of the max-size limits you should order
-# the cache_dir lines with the smallest max-size value first and the
-# ones with no max-size specification last.
-#
-# Note that for coss, max-size must be less than COSS_MEMBUF_SZ
-# (hard coded at 1 MB).
-#
-#Default:
-cache_dir ufs /var/spool/squid 16384 16 1024
-
-# TAG: store_dir_select_algorithm
-# Set this to 'round-robin' as an alternative.
-#
-#Default:
-# store_dir_select_algorithm least-load
-
-# TAG: max_open_disk_fds
-# To avoid having disk as the I/O bottleneck Squid can optionally
-# bypass the on-disk cache if more than this amount of disk file
-# descriptors are open.
-#
-# A value of 0 indicates no limit.
-#
-#Default:
-# max_open_disk_fds 0
-
-# TAG: minimum_object_size (bytes)
-# Objects smaller than this size will NOT be saved on disk. The
-# value is specified in kilobytes, and the default is 0 KB, which
-# means there is no minimum.
-#
-#Default:
-# minimum_object_size 0 KB
-
-# TAG: maximum_object_size (bytes)
-# Objects larger than this size will NOT be saved on disk. The
-# value is specified in kilobytes, and the default is 4MB. If
-# you wish to get a high BYTES hit ratio, you should probably
-# increase this (one 32 MB object hit counts for 3200 10KB
-# hits). If you wish to increase speed more than your want to
-# save bandwidth you should leave this low.
-#
-# NOTE: if using the LFUDA replacement policy you should increase
-# this value to maximize the byte hit rate improvement of LFUDA!
-# See replacement_policy below for a discussion of this policy.
-#
-# NOTE 2: In Debian the default is raised to 20MB allowing cache
-# of Packages files in debian repositories. This makes squid a
-# proper proxy for APT.
-#
-#Default:
-#NOTE 3: raised to 150 MB
-maximum_object_size 153600 KB
-
-# TAG: cache_swap_low (percent, 0-100)
-# TAG: cache_swap_high (percent, 0-100)
-#
-# The low- and high-water marks for cache object replacement.
-# Replacement begins when the swap (disk) usage is above the
-# low-water mark and attempts to maintain utilization near the
-# low-water mark. As swap utilization gets close to high-water
-# mark object eviction becomes more aggressive. If utilization is
-# close to the low-water mark less replacement is done each time.
-#
-# Defaults are 90% and 95%. If you have a large cache, 5% could be
-# hundreds of MB. If this is the case you may wish to set these
-# numbers closer together.
-#
-#Default:
-# cache_swap_low 90
-# cache_swap_high 95
-
-# TAG: update_headers on|off
-# By default Squid updates stored HTTP headers when receiving
-# a 304 response. Set this to off if you want to disable this
-# for disk I/O performance reasons. Disabling this VIOLATES the
-# HTTP standard, and could make you liable for problems which it
-# causes.
-#
-#Default:
-# update_headers on
-
-
-# LOGFILE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: logformat
-# Usage:
-#
-# logformat <name> <format specification>
-#
-# Defines an access log format.
-#
-# The <format specification> is a string with embedded % format codes
-#
-# % format codes all follow the same basic structure where all but
-# the formatcode is optional. Output strings are automatically escaped
-# as required according to their context and the output format
-# modifiers are usually not needed, but can be specified if an explicit
-# output format is desired.
-#
-# % ["|[|'|#] [-] [[0]width] [{argument}] formatcode
-#
-# " output in quoted string format
-# [ output in squid text log format as used by log_mime_hdrs
-# # output in URL quoted format
-# ' output as-is
-#
-# - left aligned
-# width field width. If starting with 0 the
-# output is zero padded
-# {arg} argument such as header name etc
-#
-# Format codes:
-#
-# >a Client source IP address
-# >A Client FQDN
-# >p Client source port
-# <A Server IP address or peer name
-# la Local IP address (http_port)
-# lp Local port number (http_port)
-# oa Our outgoing IP address (tcp_outgoing_address)
-# ts Seconds since epoch
-# tu subsecond time (milliseconds)
-# tl Local time. Optional strftime format argument
-# default %d/%b/%Y:%H:%M:%S %z
-# tg GMT time. Optional strftime format argument
-# default %d/%b/%Y:%H:%M:%S %z
-# tr Response time (milliseconds)
-# >h Request header. Optional header name argument
-# on the format header[:[separator]element]
-# <h Reply header. Optional header name argument
-# as for >h
-# un User name
-# ul User name from authentication
-# ui User name from ident
-# us User name from SSL
-# ue User name from external acl helper
-# Hs HTTP status code
-# Ss Squid request status (TCP_MISS etc)
-# Sh Squid hierarchy status (DEFAULT_PARENT etc)
-# mt MIME content type
-# rm Request method (GET/POST etc)
-# ru Request URL
-# rp Request URL-Path excluding hostname
-# rv Request protocol version
-# ea Log string returned by external acl
-# <st Reply size including HTTP headers
-# >st Request size including HTTP headers
-# st Request+Reply size including HTTP headers
-# sn Unique sequence number per log line entry
-# % a literal % character
-#
-# The default formats available (which do not need re-defining) are:
-#
-#logformat squid %ts.%03tu %6tr %>a %Ss/%03Hs %<st %rm %ru %un %Sh/%<A %mt
-#logformat squidmime %ts.%03tu %6tr %>a %Ss/%03Hs %<st %rm %ru %un %Sh/%<A %mt [%>h] [%<h]
-#logformat common %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %Hs %<st %Ss:%Sh
-#logformat combined %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %Hs %<st "%{Referer}>h" "%{User-Agent}>h" %Ss:%Sh
-#
-#Default:
-# none
-
-# TAG: access_log
-# These files log client request activities. Has a line every HTTP or
-# ICP request. The format is:
-# access_log <filepath> [<logformat name> [acl acl ...]]
-# access_log none [acl acl ...]]
-#
-# Will log to the specified file using the specified format (which
-# must be defined in a logformat directive) those entries which match
-# ALL the acl's specified (which must be defined in acl clauses).
-# If no acl is specified, all requests will be logged to this file.
-#
-# To disable logging of a request use the filepath "none", in which case
-# a logformat name should not be specified.
-#
-# To log the request via syslog specify a filepath of "syslog":
-#
-# access_log syslog[:facility.priority] [format [acl1 [acl2 ....]]]
-# where facility could be any of:
-# authpriv, daemon, local0 .. local7 or user.
-#
-# And priority could be any of:
-# err, warning, notice, info, debug.
-access_log /var/log/squid/access.log squid
-
-# TAG: log_access allow|deny acl acl...
-# This options allows you to control which requests gets logged
-# to access.log (see access_log directive). Requests denied for
-# logging will also not be accounted for in performance counters.
-#
-#Default:
-# none
-
-# TAG: logfile_daemon
-# Specify the path to the logfile-writing daemon. This daemon is
-# used to write the access and store logs, if configured.
-#
-#Default:
-# logfile_daemon /usr/lib/squid/logfile-daemon
-
-# TAG: cache_log
-# Cache logging file. This is where general information about
-# your cache's behavior goes. You can increase the amount of data
-# logged to this file with the "debug_options" tag below.
-#
-#Default:
-# cache_log /var/log/squid/cache.log
-
-# TAG: cache_store_log
-# Logs the activities of the storage manager. Shows which
-# objects are ejected from the cache, and which objects are
-# saved and for how long. To disable, enter "none". There are
-# not really utilities to analyze this data, so you can safely
-# disable it.
-#
-#Default:
-# cache_store_log /var/log/squid/store.log
-
-# TAG: cache_swap_state
-# Location for the cache "swap.state" file. This index file holds
-# the metadata of objects saved on disk. It is used to rebuild
-# the cache during startup. Normally this file resides in each
-# 'cache_dir' directory, but you may specify an alternate
-# pathname here. Note you must give a full filename, not just
-# a directory. Since this is the index for the whole object
-# list you CANNOT periodically rotate it!
-#
-# If %s can be used in the file name it will be replaced with a
-# a representation of the cache_dir name where each / is replaced
-# with '.'. This is needed to allow adding/removing cache_dir
-# lines when cache_swap_log is being used.
-#
-# If have more than one 'cache_dir', and %s is not used in the name
-# these swap logs will have names such as:
-#
-# cache_swap_log.00
-# cache_swap_log.01
-# cache_swap_log.02
-#
-# The numbered extension (which is added automatically)
-# corresponds to the order of the 'cache_dir' lines in this
-# configuration file. If you change the order of the 'cache_dir'
-# lines in this file, these index files will NOT correspond to
-# the correct 'cache_dir' entry (unless you manually rename
-# them). We recommend you do NOT use this option. It is
-# better to keep these index files in each 'cache_dir' directory.
-#
-#Default:
-# none
-
-# TAG: logfile_rotate
-# Specifies the number of logfile rotations to make when you
-# type 'squid -k rotate'. The default is 10, which will rotate
-# with extensions 0 through 9. Setting logfile_rotate to 0 will
-# disable the file name rotation, but the logfiles are still closed
-# and re-opened. This will enable you to rename the logfiles
-# yourself just before sending the rotate signal.
-#
-# Note, the 'squid -k rotate' command normally sends a USR1
-# signal to the running squid process. In certain situations
-# (e.g. on Linux with Async I/O), USR1 is used for other
-# purposes, so -k rotate uses another signal. It is best to get
-# in the habit of using 'squid -k rotate' instead of 'kill -USR1
-# <pid>'.
-#
-# Note2, for Debian/Linux the default of logfile_rotate is
-# zero, since it includes external logfile-rotation methods.
-#
-#Default:
-# logfile_rotate 0
-
-# TAG: emulate_httpd_log on|off
-# The Cache can emulate the log file format which many 'httpd'
-# programs use. To disable/enable this emulation, set
-# emulate_httpd_log to 'off' or 'on'. The default
-# is to use the native log format since it includes useful
-# information Squid-specific log analyzers use.
-#
-#Default:
-# emulate_httpd_log off
-
-# TAG: log_ip_on_direct on|off
-# Log the destination IP address in the hierarchy log tag when going
-# direct. Earlier Squid versions logged the hostname here. If you
-# prefer the old way set this to off.
-#
-#Default:
-# log_ip_on_direct on
-
-# TAG: mime_table
-# Pathname to Squid's MIME table. You shouldn't need to change
-# this, but the default file contains examples and formatting
-# information if you do.
-#
-#Default:
-# mime_table /usr/share/squid/mime.conf
-
-# TAG: log_mime_hdrs on|off
-# The Cache can record both the request and the response MIME
-# headers for each HTTP transaction. The headers are encoded
-# safely and will appear as two bracketed fields at the end of
-# the access log (for either the native or httpd-emulated log
-# formats). To enable this logging set log_mime_hdrs to 'on'.
-#
-#Default:
-# log_mime_hdrs off
-
-# TAG: useragent_log
-# Squid will write the User-Agent field from HTTP requests
-# to the filename specified here. By default useragent_log
-# is disabled.
-#
-#Default:
-# none
-
-# TAG: referer_log
-# Squid will write the Referer field from HTTP requests to the
-# filename specified here. By default referer_log is disabled.
-# Note that "referer" is actually a misspelling of "referrer"
-# however the misspelt version has been accepted into the HTTP RFCs
-# and we accept both.
-#
-#Default:
-# none
-
-# TAG: pid_filename
-# A filename to write the process-id to. To disable, enter "none".
-#
-#Default:
-# pid_filename /var/run/squid.pid
-
-# TAG: debug_options
-# Logging options are set as section,level where each source file
-# is assigned a unique section. Lower levels result in less
-# output, Full debugging (level 9) can result in a very large
-# log file, so be careful. The magic word "ALL" sets debugging
-# levels for all sections. We recommend normally running with
-# "ALL,1".
-#
-#Default:
-# debug_options ALL,1
-
-# TAG: log_fqdn on|off
-# Turn this on if you wish to log fully qualified domain names
-# in the access.log. To do this Squid does a DNS lookup of all
-# IP's connecting to it. This can (in some situations) increase
-# latency, which makes your cache seem slower for interactive
-# browsing.
-#
-#Default:
-# log_fqdn off
-
-# TAG: client_netmask
-# A netmask for client addresses in logfiles and cachemgr output.
-# Change this to protect the privacy of your cache clients.
-# A netmask of 255.255.255.0 will log all IP's in that range with
-# the last digit set to '0'.
-#
-#Default:
-# client_netmask 255.255.255.255
-
-# TAG: forward_log
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-forward-log option
-#
-# Logs the server-side requests.
-#
-# This is currently work in progress.
-#
-#Default:
-# none
-
-# TAG: strip_query_terms
-# By default, Squid strips query terms from requested URLs before
-# logging. This protects your user's privacy.
-#
-#Default:
-# strip_query_terms on
-
-# TAG: buffered_logs on|off
-# cache.log log file is written with stdio functions, and as such
-# it can be buffered or unbuffered. By default it will be unbuffered.
-# Buffering it can speed up the writing slightly (though you are
-# unlikely to need to worry unless you run with tons of debugging
-# enabled in which case performance will suffer badly anyway..).
-#
-#Default:
-# buffered_logs off
-
-# TAG: netdb_filename
-# A filename where Squid stores it's netdb state between restarts.
-# To disable, enter "none".
-#
-#Default:
-# netdb_filename /var/spool/squid/logs/netdb.state
-
-
-# OPTIONS FOR FTP GATEWAYING
-# -----------------------------------------------------------------------------
-
-# TAG: ftp_user
-# If you want the anonymous login password to be more informative
-# (and enable the use of picky ftp servers), set this to something
-# reasonable for your domain, like wwwuser@somewhere.net
-#
-# The reason why this is domainless by default is the
-# request can be made on the behalf of a user in any domain,
-# depending on how the cache is used.
-# Some ftp server also validate the email address is valid
-# (for example perl.com).
-#
-#Default:
-# ftp_user Squid@
-
-# TAG: ftp_list_width
-# Sets the width of ftp listings. This should be set to fit in
-# the width of a standard browser. Setting this too small
-# can cut off long filenames when browsing ftp sites.
-#
-#Default:
-# ftp_list_width 32
-
-# TAG: ftp_passive
-# If your firewall does not allow Squid to use passive
-# connections, turn off this option.
-#
-#Default:
-# ftp_passive on
-
-# TAG: ftp_sanitycheck
-# For security and data integrity reasons Squid by default performs
-# sanity checks of the addresses of FTP data connections ensure the
-# data connection is to the requested server. If you need to allow
-# FTP connections to servers using another IP address for the data
-# connection turn this off.
-#
-#Default:
-# ftp_sanitycheck on
-
-# TAG: ftp_telnet_protocol
-# The FTP protocol is officially defined to use the telnet protocol
-# as transport channel for the control connection. However, many
-# implementations are broken and does not respect this aspect of
-# the FTP protocol.
-#
-# If you have trouble accessing files with ASCII code 255 in the
-# path or similar problems involving this ASCII code you can
-# try setting this directive to off. If that helps, report to the
-# operator of the FTP server in question that their FTP server
-# is broken and does not follow the FTP standard.
-#
-#Default:
-# ftp_telnet_protocol on
-
-
-# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
-# -----------------------------------------------------------------------------
-
-# TAG: diskd_program
-# Specify the location of the diskd executable.
-# Note this is only useful if you have compiled in
-# diskd as one of the store io modules.
-#
-#Default:
-# diskd_program /usr/lib/squid/diskd-daemon
-
-# TAG: unlinkd_program
-# Specify the location of the executable for file deletion process.
-#
-#Default:
-# unlinkd_program /usr/lib/squid/unlinkd
-
-# TAG: pinger_program
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-icmp option
-#
-# Specify the location of the executable for the pinger process.
-#
-#Default:
-# pinger_program /usr/lib/squid/pinger
-
-
-# OPTIONS FOR URL REWRITING
-# -----------------------------------------------------------------------------
-
-# TAG: storeurl_rewrite_program
-# Specify the location of the executable for the Store URL rewriter.
-# The Store URL rewriter allows URLs to be "normalised" ; mapping
-# multiple URLs to a single URL representation for cache operations.
-#
-# For example, if you request an object at:
-#
-# http://srv1.example.com/image.gif
-#
-# and a subsequent request for:
-#
-# http://srv2.example.com/image.gif
-#
-# then Squid will treat these both as different URLs and cache them
-# seperately.
-#
-# This is almost the normal case, but an increasing number of sites
-# distribute the same content between multiple frontend hosts.
-# The Store URL rewriter allows you to rewrite these URLs to one URL
-# to use for cache operations, but not -fetches-. Fetches are still
-# made from the original site, but stored with the store URL rewritten
-# URL as the store key.
-#
-# For each requested URL rewriter will receive on line with the format
-#
-# URL <SP> client_ip "/" fqdn <SP> user <SP> method <SP> urlgroup
-# [<SP> kvpairs] <NL>
-#
-# In the future, the rewriter interface will be extended with
-# key=value pairs ("kvpairs" shown above). Rewriter programs
-# should be prepared to receive and possibly ignore additional
-# whitespace-separated tokens on each input line.
-#
-# And the rewriter may return a rewritten URL. The other components of
-# the request line does not need to be returned (ignored if they are).
-#
-# By default, a Store URL rewriter is not used.
-#
-# Please note - the normal URL rewriter rewrites Squid's _destination_
-# URL - ie, what it fetches. The Store URL rewriter rewrites Squid's
-# _store_ URL - ie, what it uses to store and retrieve objects.
-#
-#Default:
-# none
-
-# TAG: storeurl_rewrite_children
-#
-#
-#Default:
-# storeurl_rewrite_children 5
-
-# TAG: storeurl_rewrite_concurrency
-#
-#
-#Default:
-# storeurl_rewrite_concurrency 0
-
-# TAG: url_rewrite_program
-# Specify the location of the executable for the URL rewriter.
-# Since they can perform almost any function there isn't one included.
-#
-# For each requested URL rewriter will receive on line with the format
-#
-# URL <SP> client_ip "/" fqdn <SP> user <SP> method <SP> urlgroup
-# [<SP> kvpairs] <NL>
-#
-# In the future, the rewriter interface will be extended with
-# key=value pairs ("kvpairs" shown above). Rewriter programs
-# should be prepared to receive and possibly ignore additional
-# whitespace-separated tokens on each input line.
-#
-# And the rewriter may return a rewritten URL. The other components of
-# the request line does not need to be returned (ignored if they are).
-#
-# The rewriter can also indicate that a client-side redirect should
-# be performed to the new URL. This is done by prefixing the returned
-# URL with "301:" (moved permanently) or 302: (moved temporarily).
-#
-# It can also return a "urlgroup" that can subsequently be matched
-# in cache_peer_access and similar ACL driven rules. An urlgroup is
-# returned by prefixing the returned URL with "!urlgroup!".
-#
-# By default, a URL rewriter is not used.
-#
-#Default:
-# none
-
-# TAG: url_rewrite_children
-# The number of redirector processes to spawn. If you start
-# too few Squid will have to wait for them to process a backlog of
-# URLs, slowing it down. If you start too many they will use RAM
-# and other system resources.
-#
-#Default:
-# url_rewrite_children 5
-
-# TAG: url_rewrite_concurrency
-# The number of requests each redirector helper can handle in
-# parallel. Defaults to 0 which indicates the redirector
-# is a old-style single threaded redirector.
-#
-# When this directive is set to a value >= 1 then the protocol
-# used to communicate with the helper is modified to include
-# a request ID in front of the request/response. The request
-# ID from the request must be echoed back with the response
-# to that request.
-#
-#Default:
-# url_rewrite_concurrency 0
-
-# TAG: url_rewrite_host_header
-# By default Squid rewrites any Host: header in redirected
-# requests. If you are running an accelerator this may
-# not be a wanted effect of a redirector.
-#
-# WARNING: Entries are cached on the result of the URL rewriting
-# process, so be careful if you have domain-virtual hosts.
-#
-#Default:
-# url_rewrite_host_header on
-
-# TAG: url_rewrite_access
-# If defined, this access list specifies which requests are
-# sent to the redirector processes. By default all requests
-# are sent.
-#
-#Default:
-# none
-
-# TAG: storeurl_access
-#
-#
-#Default:
-# none
-
-# TAG: redirector_bypass
-# When this is 'on', a request will not go through the
-# redirector if all redirectors are busy. If this is 'off'
-# and the redirector queue grows too large, Squid will exit
-# with a FATAL error and ask you to increase the number of
-# redirectors. You should only enable this if the redirectors
-# are not critical to your caching system. If you use
-# redirectors for access control, and you enable this option,
-# users may have access to pages they should not
-# be allowed to request.
-#
-#Default:
-# redirector_bypass off
-
-# TAG: location_rewrite_program
-# Specify the location of the executable for the Location rewriter,
-# used to rewrite server generated redirects. Usually used in
-# conjunction with a url_rewrite_program
-#
-# For each Location header received the location rewriter will receive
-# one line with the format:
-#
-# location URL <SP> requested URL <SP> urlgroup <NL>
-#
-# And the rewriter may return a rewritten Location URL or a blank line.
-# The other components of the request line does not need to be returned
-# (ignored if they are).
-#
-# By default, a Location rewriter is not used.
-#
-#Default:
-# none
-
-# TAG: location_rewrite_children
-# The number of location rewriting processes to spawn. If you start
-# too few Squid will have to wait for them to process a backlog of
-# URLs, slowing it down. If you start too many they will use RAM
-# and other system resources.
-#
-#Default:
-# location_rewrite_children 5
-
-# TAG: location_rewrite_concurrency
-# The number of requests each Location rewriter helper can handle in
-# parallel. Defaults to 0 which indicates that the helper
-# is a old-style singlethreaded helper.
-#
-#Default:
-# location_rewrite_concurrency 0
-
-# TAG: location_rewrite_access
-# If defined, this access list specifies which requests are
-# sent to the location rewriting processes. By default all Location
-# headers are sent.
-#
-#Default:
-# none
-
-
-# OPTIONS FOR TUNING THE CACHE
-# -----------------------------------------------------------------------------
-
-# TAG: cache
-# A list of ACL elements which, if matched, cause the request to
-# not be satisfied from the cache and the reply to not be cached.
-# In other words, use this to force certain objects to never be cached.
-#
-# You must use the word 'DENY' to indicate the ACL names which should
-# NOT be cached.
-#
-# Default is to allow all to be cached.
-#
-#Default:
-# none
-
-# TAG: max_stale time-units
-# This option puts an upper limit on how stale content Squid
-# will serve from the cache if cache validation fails.
-#
-#Default:
-# max_stale 1 week
-
-# TAG: refresh_pattern
-# usage: refresh_pattern [-i] regex min percent max [options]
-#
-# By default, regular expressions are CASE-SENSITIVE. To make
-# them case-insensitive, use the -i option.
-#
-# 'Min' is the time (in minutes) an object without an explicit
-# expiry time should be considered fresh. The recommended
-# value is 0, any higher values may cause dynamic applications
-# to be erroneously cached unless the application designer
-# has taken the appropriate actions.
-#
-# 'Percent' is a percentage of the objects age (time since last
-# modification age) an object without explicit expiry time
-# will be considered fresh.
-#
-# 'Max' is an upper limit on how long objects without an explicit
-# expiry time will be considered fresh.
-#
-# options: override-expire
-# override-lastmod
-# reload-into-ims
-# ignore-reload
-# ignore-no-cache
-# ignore-private
-# ignore-auth
-# stale-while-revalidate=NN
-# ignore-stale-while-revalidate
-# max-stale=NN
-# negative-ttl=NN
-#
-# override-expire enforces min age even if the server
-# sent an explicit expiry time (e.g., with the
-# Expires: header or Cache-Control: max-age). Doing this
-# VIOLATES the HTTP standard. Enabling this feature
-# could make you liable for problems which it causes.
-#
-# Note: this does not enforce staleness - it only extends
-# freshness / min. If the server returns a Expires time which
-# is longer than your max time, Squid will still consider
-# the object fresh for that period of time.
-#
-# override-lastmod enforces min age even on objects
-# that were modified recently.
-#
-# reload-into-ims changes client no-cache or ``reload''
-# to If-Modified-Since requests. Doing this VIOLATES the
-# HTTP standard. Enabling this feature could make you
-# liable for problems which it causes.
-#
-# ignore-reload ignores a client no-cache or ``reload''
-# header. Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which
-# it causes.
-#
-# ignore-no-cache ignores any ``Pragma: no-cache'' and
-# ``Cache-control: no-cache'' headers received from a server.
-# The HTTP RFC never allows the use of this (Pragma) header
-# from a server, only a client, though plenty of servers
-# send it anyway.
-#
-# ignore-private ignores any ``Cache-control: private''
-# headers received from a server. Doing this VIOLATES
-# the HTTP standard. Enabling this feature could make you
-# liable for problems which it causes.
-#
-# ignore-auth caches responses to requests with authorization,
-# as if the originserver had sent ``Cache-control: public''
-# in the response header. Doing this VIOLATES the HTTP standard.
-# Enabling this feature could make you liable for problems which
-# it causes.
-#
-# stale-while-revalidate=NN makes Squid perform an asyncronous
-# cache validation if the object isn't more stale than NN.
-# Doing this VIOLATES the HTTP standard. Enabling this
-# feature could make you liable for problems which it
-# causes.
-#
-# ignore-stale-while-revalidate makes Squid ignore any 'Cache-Control:
-# stale-while-revalidate=NN' headers received from a server. Can be
-# combined with stale-while-revalidate=NN to override the server provided
-# value.
-#
-# max-stale=NN provided a maximum staleness factor. Squid won't
-# serve objects more stale than this even if it failed to
-# validate the object.
-#
-# negative-ttl=NN overrides the global negative_ttl parameter
-# selectively for URLs matching this pattern (in seconds).
-#
-# Basically a cached object is:
-#
-# FRESH if expires < now, else STALE
-# STALE if age > max
-# FRESH if lm-factor < percent, else STALE
-# FRESH if age < min
-# else STALE
-#
-# The refresh_pattern lines are checked in the order listed here.
-# The first entry which matches is used. If none of the entries
-# match the default will be used.
-#
-# Note, you must uncomment all the default lines if you want
-# to change one. The default setting is only active if none is
-# used.
-#
-#Suggested default:
-refresh_pattern ^ftp: 1440 20% 10080
-refresh_pattern ^gopher: 1440 0% 1440
-refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
-refresh_pattern /(|In)Release(|\.gpg)$ 0 0% 0
-refresh_pattern /(Packages|Sources)(|\.gz|\.bz2|\.xz)$ 0 0% 0
-refresh_pattern \.deb$ 129600 100% 129600
-refresh_pattern \.udeb$ 129600 100% 129600
-refresh_pattern \.tar\.(gz|bz2|xz|lzma)$ 129600 100% 129600
-refresh_pattern . 0 20% 4320
-
-# TAG: quick_abort_min (KB)
-# TAG: quick_abort_max (KB)
-# TAG: quick_abort_pct (percent)
-# The cache by default continues downloading aborted requests
-# which are almost completed (less than 16 KB remaining). This
-# may be undesirable on slow (e.g. SLIP) links and/or very busy
-# caches. Impatient users may tie up file descriptors and
-# bandwidth by repeatedly requesting and immediately aborting
-# downloads.
-#
-# When the user aborts a request, Squid will check the
-# quick_abort values to the amount of data transfered until
-# then.
-#
-# If the transfer has less than 'quick_abort_min' KB remaining,
-# it will finish the retrieval.
-#
-# If the transfer has more than 'quick_abort_max' KB remaining,
-# it will abort the retrieval.
-#
-# If more than 'quick_abort_pct' of the transfer has completed,
-# it will finish the retrieval.
-#
-# If you do not want any retrieval to continue after the client
-# has aborted, set both 'quick_abort_min' and 'quick_abort_max'
-# to '0 KB'.
-#
-# If you want retrievals to always continue if they are being
-# cached set 'quick_abort_min' to '-1 KB'.
-#
-#Default:
-# quick_abort_min 16 KB
-# quick_abort_max 16 KB
-# quick_abort_pct 95
-
-# TAG: read_ahead_gap buffer-size
-# The amount of data the cache will buffer ahead of what has been
-# sent to the client when retrieving an object from another server.
-#
-#Default:
-# read_ahead_gap 16 KB
-
-# TAG: negative_ttl time-units
-# Time-to-Live (TTL) for failed requests. Certain types of
-# failures (such as "connection refused" and "404 Not Found") are
-# negatively-cached for a configurable amount of time. The
-# default is 5 minutes. Note that this is different from
-# negative caching of DNS lookups.
-#
-#Default:
-# negative_ttl 5 minutes
-
-# TAG: positive_dns_ttl time-units
-# Upper limit on how long Squid will cache positive DNS responses.
-# Default is 6 hours (360 minutes). This directive must be set
-# larger than negative_dns_ttl.
-#
-#Default:
-# positive_dns_ttl 6 hours
-
-# TAG: negative_dns_ttl time-units
-# Time-to-Live (TTL) for negative caching of failed DNS lookups.
-# This also sets the lower cache limit on positive lookups.
-# Minimum value is 1 second, and it is not recommendable to go
-# much below 10 seconds.
-#
-#Default:
-# negative_dns_ttl 1 minute
-
-# TAG: range_offset_limit (bytes)
-# Sets a upper limit on how far into the the file a Range request
-# may be to cause Squid to prefetch the whole file. If beyond this
-# limit Squid forwards the Range request as it is and the result
-# is NOT cached.
-#
-# This is to stop a far ahead range request (lets say start at 17MB)
-# from making Squid fetch the whole object up to that point before
-# sending anything to the client.
-#
-# A value of -1 causes Squid to always fetch the object from the
-# beginning so it may cache the result. (2.0 style)
-#
-# A value of 0 causes Squid to never fetch more than the
-# client requested. (default)
-#
-#Default:
-# range_offset_limit 0 KB
-
-# TAG: minimum_expiry_time (seconds)
-# The minimum caching time according to (Expires - Date)
-# Headers Squid honors if the object can't be revalidated
-# defaults to 60 seconds. In reverse proxy enorinments it
-# might be desirable to honor shorter object lifetimes. It
-# is most likely better to make your server return a
-# meaningful Last-Modified header however.
-#
-#Default:
-# minimum_expiry_time 60 seconds
-
-# TAG: store_avg_object_size (kbytes)
-# Average object size, used to estimate number of objects your
-# cache can hold. The default is 13 KB.
-#
-#Default:
-# store_avg_object_size 13 KB
-
-# TAG: store_objects_per_bucket
-# Target number of objects per bucket in the store hash table.
-# Lowering this value increases the total number of buckets and
-# also the storage maintenance rate. The default is 20.
-#
-#Default:
-# store_objects_per_bucket 20
-
-
-# HTTP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: request_header_max_size (KB)
-# This specifies the maximum size for HTTP headers in a request.
-# Request headers are usually relatively small (about 512 bytes).
-# Placing a limit on the request header size will catch certain
-# bugs (for example with persistent connections) and possibly
-# buffer-overflow or denial-of-service attacks.
-#
-#Default:
-# request_header_max_size 20 KB
-
-# TAG: reply_header_max_size (KB)
-# This specifies the maximum size for HTTP headers in a reply.
-# Reply headers are usually relatively small (about 512 bytes).
-# Placing a limit on the reply header size will catch certain
-# bugs (for example with persistent connections) and possibly
-# buffer-overflow or denial-of-service attacks.
-#
-#Default:
-# reply_header_max_size 20 KB
-
-# TAG: request_body_max_size (KB)
-# This specifies the maximum size for an HTTP request body.
-# In other words, the maximum size of a PUT/POST request.
-# A user who attempts to send a request with a body larger
-# than this limit receives an "Invalid Request" error message.
-# If you set this parameter to a zero (the default), there will
-# be no limit imposed.
-#
-#Default:
-# request_body_max_size 0 KB
-
-# TAG: broken_posts
-# A list of ACL elements which, if matched, causes Squid to send
-# an extra CRLF pair after the body of a PUT/POST request.
-#
-# Some HTTP servers has broken implementations of PUT/POST,
-# and rely on an extra CRLF pair sent by some WWW clients.
-#
-# Quote from RFC2616 section 4.1 on this matter:
-#
-# Note: certain buggy HTTP/1.0 client implementations generate an
-# extra CRLF's after a POST request. To restate what is explicitly
-# forbidden by the BNF, an HTTP/1.1 client must not preface or follow
-# a request with an extra CRLF.
-#
-#Example:
-# acl buggy_server url_regex ^http://....
-# broken_posts allow buggy_server
-#
-#Default:
-# none
-
-# TAG: upgrade_http0.9
-# This access list controls when HTTP/0.9 responses is upgraded
-# to our current HTTP version. The default is to always upgrade.
-#
-# Some applications expect to be able to respond with non-HTTP
-# responses and clients gets confused if the response is upgraded.
-# For example SHOUTcast servers used for mp3 streaming.
-#
-# To enable some flexibility in detection of such applications
-# the first line of the response is available in the internal header
-# X-HTTP09-First-Line for use in the rep_header acl.
-#
-# Don't upgrade ShoutCast responses to HTTP
-acl shoutcast rep_header X-HTTP09-First-Line ^ICY.[0-9]
-upgrade_http0.9 deny shoutcast
-
-# TAG: via on|off
-# If set (default), Squid will include a Via header in requests and
-# replies as required by RFC2616.
-#
-#Default:
-# via on
-
-# TAG: cache_vary
-# When 'cache_vary' is set to off, response that have a
-# Vary header will not be stored in the cache.
-#
-#Default:
-# cache_vary on
-
-# TAG: broken_vary_encoding
-# Many servers have broken support for on-the-fly Content-Encoding,
-# returning the same ETag on both plain and gzip:ed variants.
-# Vary replies matching this access list will have the cache split
-# on the Accept-Encoding header of the request and not trusting the
-# ETag to be unique.
-#
-# Apache mod_gzip and mod_deflate known to be broken so don't trust
-# Apache to signal ETag correctly on such responses
-acl apache rep_header Server ^Apache
-broken_vary_encoding allow apache
-
-# TAG: collapsed_forwarding (on|off)
-# This option enables multiple requests for the same URI to be
-# processed as one request. Normally disabled to avoid increased
-# latency on dynamic content, but there can be benefit from enabling
-# this in accelerator setups where the web servers are the bottleneck
-# and reliable and returns mostly cacheable information.
-#
-#Default:
-# collapsed_forwarding off
-
-# TAG: refresh_stale_hit (time)
-# This option changes the refresh algorithm to allow concurrent
-# requests while an object is being refreshed to be processed as
-# cache hits if the object expired less than X seconds ago. Default
-# is 0 to disable this feature. This option is mostly interesting
-# in accelerator setups where a few objects is accessed very
-# frequently.
-#
-#Default:
-# refresh_stale_hit 0 seconds
-
-# TAG: ie_refresh on|off
-# Microsoft Internet Explorer up until version 5.5 Service
-# Pack 1 has an issue with transparent proxies, wherein it
-# is impossible to force a refresh. Turning this on provides
-# a partial fix to the problem, by causing all IMS-REFRESH
-# requests from older IE versions to check the origin server
-# for fresh content. This reduces hit ratio by some amount
-# (~10% in my experience), but allows users to actually get
-# fresh content when they want it. Note because Squid
-# cannot tell if the user is using 5.5 or 5.5SP1, the behavior
-# of 5.5 is unchanged from old versions of Squid (i.e. a
-# forced refresh is impossible). Newer versions of IE will,
-# hopefully, continue to have the new behavior and will be
-# handled based on that assumption. This option defaults to
-# the old Squid behavior, which is better for hit ratios but
-# worse for clients using IE, if they need to be able to
-# force fresh content.
-#
-#Default:
-# ie_refresh off
-
-# TAG: vary_ignore_expire on|off
-# Many HTTP servers supporting Vary gives such objects
-# immediate expiry time with no cache-control header
-# when requested by a HTTP/1.0 client. This option
-# enables Squid to ignore such expiry times until
-# HTTP/1.1 is fully implemented.
-# WARNING: This may eventually cause some varying
-# objects not intended for caching to get cached.
-#
-#Default:
-# vary_ignore_expire off
-
-# TAG: extension_methods
-# Squid only knows about standardized HTTP request methods.
-# You can add up to 20 additional "extension" methods here.
-extension_methods REPORT MERGE MKACTIVITY CHECKOUT
-
-# TAG: request_entities
-# Squid defaults to deny GET and HEAD requests with request entities,
-# as the meaning of such requests are undefined in the HTTP standard
-# even if not explicitly forbidden.
-#
-# Set this directive to on if you have clients which insists
-# on sending request entities in GET or HEAD requests. But be warned
-# that there is server software (both proxies and web servers) which
-# can fail to properly process this kind of request which may make you
-# vulnerable to cache pollution attacks if enabled.
-#
-#Default:
-# request_entities off
-
-# TAG: header_access
-# Usage: header_access header_name allow|deny [!]aclname ...
-#
-# WARNING: Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which it
-# causes.
-#
-# This option replaces the old 'anonymize_headers' and the
-# older 'http_anonymizer' option with something that is much
-# more configurable. This new method creates a list of ACLs
-# for each header, allowing you very fine-tuned header
-# mangling.
-#
-# You can only specify known headers for the header name.
-# Other headers are reclassified as 'Other'. You can also
-# refer to all the headers with 'All'.
-#
-# For example, to achieve the same behavior as the old
-# 'http_anonymizer standard' option, you should use:
-#
-# header_access From deny all
-# header_access Referer deny all
-# header_access Server deny all
-# header_access User-Agent deny all
-# header_access WWW-Authenticate deny all
-# header_access Link deny all
-#
-# Or, to reproduce the old 'http_anonymizer paranoid' feature
-# you should use:
-#
-# header_access Allow allow all
-# header_access Authorization allow all
-# header_access WWW-Authenticate allow all
-# header_access Proxy-Authorization allow all
-# header_access Proxy-Authenticate allow all
-# header_access Cache-Control allow all
-# header_access Content-Encoding allow all
-# header_access Content-Length allow all
-# header_access Content-Type allow all
-# header_access Date allow all
-# header_access Expires allow all
-# header_access Host allow all
-# header_access If-Modified-Since allow all
-# header_access Last-Modified allow all
-# header_access Location allow all
-# header_access Pragma allow all
-# header_access Accept allow all
-# header_access Accept-Charset allow all
-# header_access Accept-Encoding allow all
-# header_access Accept-Language allow all
-# header_access Content-Language allow all
-# header_access Mime-Version allow all
-# header_access Retry-After allow all
-# header_access Title allow all
-# header_access Connection allow all
-# header_access Proxy-Connection allow all
-# header_access All deny all
-#
-# By default, all headers are allowed (no anonymizing is
-# performed).
-#
-#Default:
-# none
-
-# TAG: header_replace
-# Usage: header_replace header_name message
-# Example: header_replace User-Agent Nutscrape/1.0 (CP/M; 8-bit)
-#
-# This option allows you to change the contents of headers
-# denied with header_access above, by replacing them with
-# some fixed string. This replaces the old fake_user_agent
-# option.
-#
-# By default, headers are removed if denied.
-#
-#Default:
-# none
-
-# TAG: relaxed_header_parser on|off|warn
-# In the default "on" setting Squid accepts certain forms
-# of non-compliant HTTP messages where it is unambiguous
-# what the sending application intended even if the message
-# is not correctly formatted. The messages is then normalized
-# to the correct form when forwarded by Squid.
-#
-# If set to "warn" then a warning will be emitted in cache.log
-# each time such HTTP error is encountered.
-#
-# If set to "off" then such HTTP errors will cause the request
-# or response to be rejected.
-#
-#Default:
-# relaxed_header_parser on
-
-# TAG: server_http11 on|off
-# This option enables the use ot HTTP/1.1 on outgoing "direct" requests.
-# See also the http11 cache_peer option.
-# Note: The HTTP/1.1 support is still incomplete, with an
-# internal HTTP/1.0 hop. As result 1xx responses will not
-# be forwarded.
-#
-#Default:
-# server_http11 off
-
-# TAG: ignore_expect_100 on|off
-# This option makes Squid ignore any Expect: 100-continue header present
-# in the request.
-# Note: Enabling this is a HTTP protocol violation, but some client may
-# not handle it well..
-#
-#Default:
-# ignore_expect_100 off
-
-# TAG: external_refresh_check
-# This option defines an external helper for determining whether to
-# refresh a stale response. It will be called when Squid receives a
-# request for a cached response that is stale; the helper can either
-# confirm that the response is stale with a STALE response, or
-# extend the freshness of the response (thereby avoiding a refresh
-# check) with a FRESH response, along with a freshness=nnn keyword.
-#
-# external_refresh_check [options] FORMAT.. /path/to/helper [helper_args]
-#
-# If present, helper_args will be passed to the helper on the command
-# line verbatim.
-#
-# Options:
-#
-# children=n Number of processes to spawn to service external
-# refresh checks (default 5).
-# concurrency=n Concurrency level per process. Only used with
-# helpers capable of processing more than one query
-# at a time.
-#
-# When using the concurrency option, the protocol is changed by introducing
-# a query channel tag infront of the request/response. The query channel
-# tag is a number between 0 and concurrency-1.
-#
-# FORMAT specifications:
-#
-# %CACHE_URI The URI of the cached response
-# %RES{Header} HTTP response header value
-# %AGE The age of the cached response
-#
-# The request sent to the helper consists of the data in the format
-# specification in the order specified.
-#
-# The helper receives lines per the above format specification, and
-# returns lines starting with OK or ERR indicating the validity of
-# the request and optionally followed by additional keywords with
-# more details. URL escaping is used to protect each value in both
-# requests and responses.
-#
-# General result syntax:
-#
-# FRESH / STALE keyword=value ...
-#
-# Defined keywords:
-#
-# freshness=nnn The number of seconds to extend the freshness of
-# the response by.
-# log=string String to be logged in access.log. Available as
-# %ef in logformat specifications.
-# res{Header}=value
-# Value to update response headers with. If already
-# present, the supplied value completely replaces
-# the cached value.
-#
-# In the event of a helper-related error (e.g., overload), Squid
-# will always default to STALE.
-#
-#Default:
-# none
-
-
-# TIMEOUTS
-# -----------------------------------------------------------------------------
-
-# TAG: forward_timeout time-units
-# This parameter specifies how long Squid should at most attempt in
-# finding a forwarding path for the request before giving up.
-#
-#Default:
-# forward_timeout 4 minutes
-
-# TAG: connect_timeout time-units
-# This parameter specifies how long to wait for the TCP connect to
-# the requested server or peer to complete before Squid should
-# attempt to find another path where to forward the request.
-#
-#Default:
-# connect_timeout 1 minute
-
-# TAG: peer_connect_timeout time-units
-# This parameter specifies how long to wait for a pending TCP
-# connection to a peer cache. The default is 30 seconds. You
-# may also set different timeout values for individual neighbors
-# with the 'connect-timeout' option on a 'cache_peer' line.
-#
-#Default:
-# peer_connect_timeout 30 seconds
-
-# TAG: read_timeout time-units
-# The read_timeout is applied on server-side connections. After
-# each successful read(), the timeout will be extended by this
-# amount. If no data is read again after this amount of time,
-# the request is aborted and logged with ERR_READ_TIMEOUT. The
-# default is 15 minutes.
-#
-#Default:
-# read_timeout 15 minutes
-
-# TAG: request_timeout
-# How long to wait for an HTTP request after initial
-# connection establishment.
-#
-#Default:
-# request_timeout 5 minutes
-
-# TAG: persistent_request_timeout
-# How long to wait for the next HTTP request on a persistent
-# connection after the previous request completes.
-#
-#Default:
-# persistent_request_timeout 2 minutes
-
-# TAG: client_lifetime time-units
-# The maximum amount of time a client (browser) is allowed to
-# remain connected to the cache process. This protects the Cache
-# from having a lot of sockets (and hence file descriptors) tied up
-# in a CLOSE_WAIT state from remote clients that go away without
-# properly shutting down (either because of a network failure or
-# because of a poor client implementation). The default is one
-# day, 1440 minutes.
-#
-# NOTE: The default value is intended to be much larger than any
-# client would ever need to be connected to your cache. You
-# should probably change client_lifetime only as a last resort.
-# If you seem to have many client connections tying up
-# filedescriptors, we recommend first tuning the read_timeout,
-# request_timeout, persistent_request_timeout and quick_abort values.
-#
-#Default:
-# client_lifetime 1 day
-
-# TAG: half_closed_clients
-# Some clients may shutdown the sending side of their TCP
-# connections, while leaving their receiving sides open. Sometimes,
-# Squid can not tell the difference between a half-closed and a
-# fully-closed TCP connection. By default, half-closed client
-# connections are kept open until a read(2) or write(2) on the
-# socket returns an error. Change this option to 'off' and Squid
-# will immediately close client connections when read(2) returns
-# "no more data to read."
-#
-#Default:
-# half_closed_clients on
-
-# TAG: pconn_timeout
-# Timeout for idle persistent connections to servers and other
-# proxies.
-#
-#Default:
-# pconn_timeout 1 minute
-
-# TAG: ident_timeout
-# Maximum time to wait for IDENT lookups to complete.
-#
-# If this is too high, and you enabled IDENT lookups from untrusted
-# users, you might be susceptible to denial-of-service by having
-# many ident requests going at once.
-#
-#Default:
-# ident_timeout 10 seconds
-
-# TAG: shutdown_lifetime time-units
-# When SIGTERM or SIGHUP is received, the cache is put into
-# "shutdown pending" mode until all active sockets are closed.
-# This value is the lifetime to set for all open descriptors
-# during shutdown mode. Any active clients after this many
-# seconds will receive a 'timeout' message.
-#
-#Default:
-# shutdown_lifetime 30 seconds
-
-
-# ADMINISTRATIVE PARAMETERS
-# -----------------------------------------------------------------------------
-
-# TAG: cache_mgr
-# Email-address of local cache manager who will receive
-# mail if the cache dies. The default is "webmaster".
-#
-#Default:
-# cache_mgr webmaster
-
-# TAG: mail_from
-# From: email-address for mail sent when the cache dies.
-# The default is to use 'appname@unique_hostname'.
-# Default appname value is "squid", can be changed into
-# src/globals.h before building squid.
-#
-#Default:
-# none
-
-# TAG: mail_program
-# Email program used to send mail if the cache dies.
-# The default is "mail". The specified program must comply
-# with the standard Unix mail syntax:
-# mail-program recipient < mailfile
-#
-# Optional command line options can be specified.
-#
-#Default:
-# mail_program mail
-
-# TAG: cache_effective_user
-# If you start Squid as root, it will change its effective/real
-# UID/GID to the user specified below. The default is to change
-# to UID to proxy. If you define cache_effective_user, but not
-# cache_effective_group, Squid sets the GID to the effective
-# user's default group ID (taken from the password file) and
-# supplementary group list from the from groups membership of
-# cache_effective_user.
-#
-#Default:
-# cache_effective_user proxy
-
-# TAG: cache_effective_group
-# If you want Squid to run with a specific GID regardless of
-# the group memberships of the effective user then set this
-# to the group (or GID) you want Squid to run as. When set
-# all other group privileges of the effective user is ignored
-# and only this GID is effective. If Squid is not started as
-# root the user starting Squid must be member of the specified
-# group.
-#
-#Default:
-# none
-
-# TAG: httpd_suppress_version_string on|off
-# Suppress Squid version string info in HTTP headers and HTML error pages.
-#
-#Default:
-# httpd_suppress_version_string off
-
-# TAG: visible_hostname
-# If you want to present a special hostname in error messages, etc,
-# define this. Otherwise, the return value of gethostname()
-# will be used. If you have multiple caches in a cluster and
-# get errors about IP-forwarding you must set them to have individual
-# names with this setting.
-#
-#Default:
-# none
-
-# TAG: unique_hostname
-# If you want to have multiple machines with the same
-# 'visible_hostname' you must give each machine a different
-# 'unique_hostname' so forwarding loops can be detected.
-#
-#Default:
-# none
-
-# TAG: hostname_aliases
-# A list of other DNS names your cache has.
-#
-#Default:
-# none
-
-# TAG: umask
-# Minimum umask which should be enforced while the proxy
-# is running, in addition to the umask set at startup.
-#
-# Note: Should start with a 0 to indicate the normal octal
-# representation of umasks
-#
-#Default:
-# umask 027
-
-
-# OPTIONS FOR THE CACHE REGISTRATION SERVICE
-# -----------------------------------------------------------------------------
-#
-# This section contains parameters for the (optional) cache
-# announcement service. This service is provided to help
-# cache administrators locate one another in order to join or
-# create cache hierarchies.
-#
-# An 'announcement' message is sent (via UDP) to the registration
-# service by Squid. By default, the announcement message is NOT
-# SENT unless you enable it with 'announce_period' below.
-#
-# The announcement message includes your hostname, plus the
-# following information from this configuration file:
-#
-# http_port
-# icp_port
-# cache_mgr
-#
-# All current information is processed regularly and made
-# available on the Web at http://www.ircache.net/Cache/Tracker/.
-
-# TAG: announce_period
-# This is how frequently to send cache announcements. The
-# default is `0' which disables sending the announcement
-# messages.
-#
-# To enable announcing your cache, just uncomment the line
-# below.
-#
-#Default:
-# announce_period 0
-#
-#To enable announcing your cache, just uncomment the line below.
-#announce_period 1 day
-
-# TAG: announce_host
-# TAG: announce_file
-# TAG: announce_port
-# announce_host and announce_port set the hostname and port
-# number where the registration message will be sent.
-#
-# Hostname will default to 'tracker.ircache.net' and port will
-# default default to 3131. If the 'filename' argument is given,
-# the contents of that file will be included in the announce
-# message.
-#
-#Default:
-# announce_host tracker.ircache.net
-# announce_port 3131
-
-
-# HTTPD-ACCELERATOR OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: httpd_accel_no_pmtu_disc on|off
-# In many setups of transparently intercepting proxies Path-MTU
-# discovery can not work on traffic towards the clients. This is
-# the case when the intercepting device does not fully track
-# connections and fails to forward ICMP must fragment messages
-# to the cache server.
-#
-# If you have such setup and experience that certain clients
-# sporadically hang or never complete requests set this to on.
-#
-#Default:
-# httpd_accel_no_pmtu_disc off
-
-
-# DELAY POOL PARAMETERS
-# -----------------------------------------------------------------------------
-
-# TAG: delay_pools
-# This represents the number of delay pools to be used. For example,
-# if you have one class 2 delay pool and one class 3 delays pool, you
-# have a total of 2 delay pools.
-#
-#Default:
-# delay_pools 0
-
-# TAG: delay_class
-# This defines the class of each delay pool. There must be exactly one
-# delay_class line for each delay pool. For example, to define two
-# delay pools, one of class 2 and one of class 3, the settings above
-# and here would be:
-#
-#Example:
-# delay_pools 2 # 2 delay pools
-# delay_class 1 2 # pool 1 is a class 2 pool
-# delay_class 2 3 # pool 2 is a class 3 pool
-#
-# The delay pool classes are:
-#
-# class 1 Everything is limited by a single aggregate
-# bucket.
-#
-# class 2 Everything is limited by a single aggregate
-# bucket as well as an "individual" bucket chosen
-# from bits 25 through 32 of the IP address.
-#
-# class 3 Everything is limited by a single aggregate
-# bucket as well as a "network" bucket chosen
-# from bits 17 through 24 of the IP address and a
-# "individual" bucket chosen from bits 17 through
-# 32 of the IP address.
-#
-# NOTE: If an IP address is a.b.c.d
-# -> bits 25 through 32 are "d"
-# -> bits 17 through 24 are "c"
-# -> bits 17 through 32 are "c * 256 + d"
-#
-#Default:
-# none
-
-# TAG: delay_access
-# This is used to determine which delay pool a request falls into.
-#
-# delay_access is sorted per pool and the matching starts with pool 1,
-# then pool 2, ..., and finally pool N. The first delay pool where the
-# request is allowed is selected for the request. If it does not allow
-# the request to any pool then the request is not delayed (default).
-#
-# For example, if you want some_big_clients in delay
-# pool 1 and lotsa_little_clients in delay pool 2:
-#
-#Example:
-# delay_access 1 allow some_big_clients
-# delay_access 1 deny all
-# delay_access 2 allow lotsa_little_clients
-# delay_access 2 deny all
-#
-#Default:
-# none
-
-# TAG: delay_parameters
-# This defines the parameters for a delay pool. Each delay pool has
-# a number of "buckets" associated with it, as explained in the
-# description of delay_class. For a class 1 delay pool, the syntax is:
-#
-#delay_parameters pool aggregate
-#
-# For a class 2 delay pool:
-#
-#delay_parameters pool aggregate individual
-#
-# For a class 3 delay pool:
-#
-#delay_parameters pool aggregate network individual
-#
-# The variables here are:
-#
-# pool a pool number - ie, a number between 1 and the
-# number specified in delay_pools as used in
-# delay_class lines.
-#
-# aggregate the "delay parameters" for the aggregate bucket
-# (class 1, 2, 3).
-#
-# individual the "delay parameters" for the individual
-# buckets (class 2, 3).
-#
-# network the "delay parameters" for the network buckets
-# (class 3).
-#
-# A pair of delay parameters is written restore/maximum, where restore is
-# the number of bytes (not bits - modem and network speeds are usually
-# quoted in bits) per second placed into the bucket, and maximum is the
-# maximum number of bytes which can be in the bucket at any time.
-#
-# For example, if delay pool number 1 is a class 2 delay pool as in the
-# above example, and is being used to strictly limit each host to 64kbps
-# (plus overheads), with no overall limit, the line is:
-#
-#delay_parameters 1 -1/-1 8000/8000
-#
-# Note that the figure -1 is used to represent "unlimited".
-#
-# And, if delay pool number 2 is a class 3 delay pool as in the above
-# example, and you want to limit it to a total of 256kbps (strict limit)
-# with each 8-bit network permitted 64kbps (strict limit) and each
-# individual host permitted 4800bps with a bucket maximum size of 64kb
-# to permit a decent web page to be downloaded at a decent speed
-# (if the network is not being limited due to overuse) but slow down
-# large downloads more significantly:
-#
-#delay_parameters 2 32000/32000 8000/8000 600/8000
-#
-# There must be one delay_parameters line for each delay pool.
-#
-#Default:
-# none
-
-# TAG: delay_initial_bucket_level (percent, 0-100)
-# The initial bucket percentage is used to determine how much is put
-# in each bucket when squid starts, is reconfigured, or first notices
-# a host accessing it (in class 2 and class 3, individual hosts and
-# networks only have buckets associated with them once they have been
-# "seen" by squid).
-#
-#Default:
-# delay_initial_bucket_level 50
-
-
-# WCCPv1 AND WCCPv2 CONFIGURATION OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: wccp_router
-# TAG: wccp2_router
-# Use this option to define your WCCP ``home'' router for
-# Squid.
-#
-# wccp_router supports a single WCCP(v1) router
-#
-# wccp2_router supports multiple WCCPv2 routers
-#
-# only one of the two may be used at the same time and defines
-# which version of WCCP to use.
-#
-#Default:
-# wccp_router 0.0.0.0
-
-# TAG: wccp_version
-# This directive is only relevant if you need to set up WCCP(v1)
-# to some very old and end-of-life Cisco routers. In all other
-# setups it must be left unset or at the default setting.
-# It defines an internal version in the WCCP(v1) protocol,
-# with version 4 being the officially documented protocol.
-#
-# According to some users, Cisco IOS 11.2 and earlier only
-# support WCCP version 3. If you're using that or an earlier
-# version of IOS, you may need to change this value to 3, otherwise
-# do not specify this parameter.
-#
-#Default:
-# wccp_version 4
-
-# TAG: wccp2_rebuild_wait
-# If this is enabled Squid will wait for the cache dir rebuild to finish
-# before sending the first wccp2 HereIAm packet
-#
-#Default:
-# wccp2_rebuild_wait on
-
-# TAG: wccp2_forwarding_method
-# WCCP2 allows the setting of forwarding methods between the
-# router/switch and the cache. Valid values are as follows:
-#
-# 1 - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
-# 2 - L2 redirect (forward the packet using Layer 2/MAC rewriting)
-#
-# Currently (as of IOS 12.4) cisco routers only support GRE.
-# Cisco switches only support the L2 redirect assignment method.
-#
-#Default:
-# wccp2_forwarding_method 1
-
-# TAG: wccp2_return_method
-# WCCP2 allows the setting of return methods between the
-# router/switch and the cache for packets that the cache
-# decides not to handle. Valid values are as follows:
-#
-# 1 - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
-# 2 - L2 redirect (forward the packet using Layer 2/MAC rewriting)
-#
-# Currently (as of IOS 12.4) cisco routers only support GRE.
-# Cisco switches only support the L2 redirect assignment.
-#
-# If the "ip wccp redirect exclude in" command has been
-# enabled on the cache interface, then it is still safe for
-# the proxy server to use a l2 redirect method even if this
-# option is set to GRE.
-#
-#Default:
-# wccp2_return_method 1
-
-# TAG: wccp2_assignment_method
-# WCCP2 allows the setting of methods to assign the WCCP hash
-# Valid values are as follows:
-#
-# 1 - Hash assignment
-# 2 - Mask assignment
-#
-# As a general rule, cisco routers support the hash assignment method
-# and cisco switches support the mask assignment method.
-#
-#Default:
-# wccp2_assignment_method 1
-
-# TAG: wccp2_service
-# WCCP2 allows for multiple traffic services. There are two
-# types: "standard" and "dynamic". The standard type defines
-# one service id - http (id 0). The dynamic service ids can be from
-# 51 to 255 inclusive. In order to use a dynamic service id
-# one must define the type of traffic to be redirected; this is done
-# using the wccp2_service_info option.
-#
-# The "standard" type does not require a wccp2_service_info option,
-# just specifying the service id will suffice.
-#
-# MD5 service authentication can be enabled by adding
-# "password=<password>" to the end of this service declaration.
-#
-# Examples:
-#
-# wccp2_service standard 0 # for the 'web-cache' standard service
-# wccp2_service dynamic 80 # a dynamic service type which will be
-# # fleshed out with subsequent options.
-# wccp2_service standard 0 password=foo
-#
-#
-#Default:
-# wccp2_service standard 0
-
-# TAG: wccp2_service_info
-# Dynamic WCCPv2 services require further information to define the
-# traffic you wish to have diverted.
-#
-# The format is:
-#
-# wccp2_service_info <id> protocol=<protocol> flags=<flag>,<flag>..
-# priority=<priority> ports=<port>,<port>..
-#
-# The relevant WCCPv2 flags:
-# + src_ip_hash, dst_ip_hash
-# + source_port_hash, dst_port_hash
-# + src_ip_alt_hash, dst_ip_alt_hash
-# + src_port_alt_hash, dst_port_alt_hash
-# + ports_source
-#
-# The port list can be one to eight entries.
-#
-# Example:
-#
-# wccp2_service_info 80 protocol=tcp flags=src_ip_hash,ports_source
-# priority=240 ports=80
-#
-# Note: the service id must have been defined by a previous
-# 'wccp2_service dynamic <id>' entry.
-#
-#Default:
-# none
-
-# TAG: wccp2_weight
-# Each cache server gets assigned a set of the destination
-# hash proportional to their weight.
-#
-#Default:
-# wccp2_weight 10000
-
-# TAG: wccp_address
-# TAG: wccp2_address
-# Use this option if you require WCCP to use a specific
-# interface address.
-#
-# The default behavior is to not bind to any specific address.
-#
-#Default:
-# wccp_address 0.0.0.0
-# wccp2_address 0.0.0.0
-
-
-# PERSISTENT CONNECTION HANDLING
-# -----------------------------------------------------------------------------
-#
-# Also see "pconn_timeout" in the TIMEOUTS section
-
-# TAG: client_persistent_connections
-# TAG: server_persistent_connections
-# Persistent connection support for clients and servers. By
-# default, Squid uses persistent connections (when allowed)
-# with its clients and servers. You can use these options to
-# disable persistent connections with clients and/or servers.
-#
-#Default:
-# client_persistent_connections on
-# server_persistent_connections on
-
-# TAG: persistent_connection_after_error
-# With this directive the use of persistent connections after
-# HTTP errors can be disabled. Useful if you have clients
-# who fail to handle errors on persistent connections proper.
-#
-#Default:
-# persistent_connection_after_error off
-
-# TAG: detect_broken_pconn
-# Some servers have been found to incorrectly signal the use
-# of HTTP/1.0 persistent connections even on replies not
-# compatible, causing significant delays. This server problem
-# has mostly been seen on redirects.
-#
-# By enabling this directive Squid attempts to detect such
-# broken replies and automatically assume the reply is finished
-# after 10 seconds timeout.
-#
-#Default:
-# detect_broken_pconn off
-
-
-# CACHE DIGEST OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: digest_generation
-# This controls whether the server will generate a Cache Digest
-# of its contents.
-#
-#Default:
-# digest_generation on
-
-# TAG: digest_bits_per_entry
-# This is the number of bits of the server's Cache Digest which
-# will be associated with the Digest entry for a given HTTP
-# Method and URL (public key) combination. The default is 5.
-#
-#Default:
-# digest_bits_per_entry 5
-
-# TAG: digest_rebuild_period (seconds)
-# This is the wait time between Cache Digest rebuilds.
-#
-#Default:
-# digest_rebuild_period 1 hour
-
-# TAG: digest_rewrite_period (seconds)
-# This is the wait time between Cache Digest writes to disk.
-#
-#Default:
-# digest_rewrite_period 1 hour
-
-# TAG: digest_swapout_chunk_size (bytes)
-# This is the number of bytes of the Cache Digest to write to
-# disk at a time. It defaults to 4096 bytes (4KB), the Squid
-# default swap page.
-#
-#Default:
-# digest_swapout_chunk_size 4096 bytes
-
-# TAG: digest_rebuild_chunk_percentage (percent, 0-100)
-# This is the percentage of the Cache Digest to be scanned at a
-# time. By default it is set to 10% of the Cache Digest.
-#
-#Default:
-# digest_rebuild_chunk_percentage 10
-
-
-# SNMP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: snmp_port
-# Squid can now serve statistics and status information via SNMP.
-# By default it listens to port 3401 on the machine. If you don't
-# wish to use SNMP, set this to "0".
-#
-# Note: on Debian/Linux, the default is zero - you need to
-# set it to 3401 to enable it.
-#
-#Default:
-# snmp_port 0
-
-# TAG: snmp_access
-# Allowing or denying access to the SNMP port.
-#
-# All access to the agent is denied by default.
-# usage:
-#
-# snmp_access allow|deny [!]aclname ...
-#
-#Example:
-# snmp_access allow snmppublic localhost
-# snmp_access deny all
-#
-#Default:
-# snmp_access deny all
-
-# TAG: snmp_incoming_address
-# TAG: snmp_outgoing_address
-# Just like 'udp_incoming_address' above, but for the SNMP port.
-#
-# snmp_incoming_address is used for the SNMP socket receiving
-# messages from SNMP agents.
-# snmp_outgoing_address is used for SNMP packets returned to SNMP
-# agents.
-#
-# The default snmp_incoming_address (0.0.0.0) is to listen on all
-# available network interfaces.
-#
-# If snmp_outgoing_address is set to 255.255.255.255 (the default)
-# it will use the same socket as snmp_incoming_address. Only
-# change this if you want to have SNMP replies sent using another
-# address than where this Squid listens for SNMP queries.
-#
-# NOTE, snmp_incoming_address and snmp_outgoing_address can not have
-# the same value since they both use port 3401.
-#
-#Default:
-# snmp_incoming_address 0.0.0.0
-# snmp_outgoing_address 255.255.255.255
-
-
-# ICP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: icp_port
-# The port number where Squid sends and receives ICP queries to
-# and from neighbor caches. Default is 3130. To disable use
-# "0". May be overridden with -u on the command line.
-#
-#Default:
-# icp_port 3130
-
-# TAG: htcp_port
-# The port number where Squid sends and receives HTCP queries to
-# and from neighbor caches. To turn it on you want to set it 4827.
-# By default it is set to "0" (disabled).
-#
-#Default:
-# htcp_port 0
-
-# TAG: log_icp_queries on|off
-# If set, ICP queries are logged to access.log. You may wish
-# do disable this if your ICP load is VERY high to speed things
-# up or to simplify log analysis.
-#
-#Default:
-# log_icp_queries on
-
-# TAG: udp_incoming_address
-# udp_incoming_address is used for UDP packets received from other
-# caches.
-#
-# The default behavior is to not bind to any specific address.
-#
-# Only change this if you want to have all UDP queries received on
-# a specific interface/address.
-#
-# NOTE: udp_incoming_address is used by the ICP, HTCP, and DNS
-# modules. Altering it will affect all of them in the same manner.
-#
-# see also; udp_outgoing_address
-#
-# NOTE, udp_incoming_address and udp_outgoing_address can not
-# have the same value since they both use the same port.
-#
-#Default:
-# udp_incoming_address 0.0.0.0
-
-# TAG: udp_outgoing_address
-# udp_outgoing_address is used for UDP packets sent out to other
-# caches.
-#
-# The default behavior is to not bind to any specific address.
-#
-# Instead it will use the same socket as udp_incoming_address.
-# Only change this if you want to have UDP queries sent using another
-# address than where this Squid listens for UDP queries from other
-# caches.
-#
-# NOTE: udp_outgoing_address is used by the ICP, HTCP, and DNS
-# modules. Altering it will affect all of them in the same manner.
-#
-# see also; udp_incoming_address
-#
-# NOTE, udp_incoming_address and udp_outgoing_address can not
-# have the same value since they both use the same port.
-#
-#Default:
-# udp_outgoing_address 255.255.255.255
-
-# TAG: icp_hit_stale on|off
-# If you want to return ICP_HIT for stale cache objects, set this
-# option to 'on'. If you have sibling relationships with caches
-# in other administrative domains, this should be 'off'. If you only
-# have sibling relationships with caches under your control,
-# it is probably okay to set this to 'on'.
-# If set to 'on', your siblings should use the option "allow-miss"
-# on their cache_peer lines for connecting to you.
-#
-#Default:
-# icp_hit_stale off
-
-# TAG: minimum_direct_hops
-# If using the ICMP pinging stuff, do direct fetches for sites
-# which are no more than this many hops away.
-#
-#Default:
-# minimum_direct_hops 4
-
-# TAG: minimum_direct_rtt
-# If using the ICMP pinging stuff, do direct fetches for sites
-# which are no more than this many rtt milliseconds away.
-#
-#Default:
-# minimum_direct_rtt 400
-
-# TAG: netdb_low
-# TAG: netdb_high
-# The low and high water marks for the ICMP measurement
-# database. These are counts, not percents. The defaults are
-# 900 and 1000. When the high water mark is reached, database
-# entries will be deleted until the low mark is reached.
-#
-#Default:
-# netdb_low 900
-# netdb_high 1000
-
-# TAG: netdb_ping_period
-# The minimum period for measuring a site. There will be at
-# least this much delay between successive pings to the same
-# network. The default is five minutes.
-#
-#Default:
-# netdb_ping_period 5 minutes
-
-# TAG: query_icmp on|off
-# If you want to ask your peers to include ICMP data in their ICP
-# replies, enable this option.
-#
-# If your peer has configured Squid (during compilation) with
-# '--enable-icmp' that peer will send ICMP pings to origin server
-# sites of the URLs it receives. If you enable this option the
-# ICP replies from that peer will include the ICMP data (if available).
-# Then, when choosing a parent cache, Squid will choose the parent with
-# the minimal RTT to the origin server. When this happens, the
-# hierarchy field of the access.log will be
-# "CLOSEST_PARENT_MISS". This option is off by default.
-#
-#Default:
-# query_icmp off
-
-# TAG: test_reachability on|off
-# When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH
-# instead of ICP_MISS if the target host is NOT in the ICMP
-# database, or has a zero RTT.
-#
-#Default:
-# test_reachability off
-
-# TAG: icp_query_timeout (msec)
-# Normally Squid will automatically determine an optimal ICP
-# query timeout value based on the round-trip-time of recent ICP
-# queries. If you want to override the value determined by
-# Squid, set this 'icp_query_timeout' to a non-zero value. This
-# value is specified in MILLISECONDS, so, to use a 2-second
-# timeout (the old default), you would write:
-#
-# icp_query_timeout 2000
-#
-#Default:
-# icp_query_timeout 0
-
-# TAG: maximum_icp_query_timeout (msec)
-# Normally the ICP query timeout is determined dynamically. But
-# sometimes it can lead to very large values (say 5 seconds).
-# Use this option to put an upper limit on the dynamic timeout
-# value. Do NOT use this option to always use a fixed (instead
-# of a dynamic) timeout value. To set a fixed timeout see the
-# 'icp_query_timeout' directive.
-#
-#Default:
-# maximum_icp_query_timeout 2000
-
-# TAG: minimum_icp_query_timeout (msec)
-# Normally the ICP query timeout is determined dynamically. But
-# sometimes it can lead to very small timeouts, even lower than
-# the normal latency variance on your link due to traffic.
-# Use this option to put an lower limit on the dynamic timeout
-# value. Do NOT use this option to always use a fixed (instead
-# of a dynamic) timeout value. To set a fixed timeout see the
-# 'icp_query_timeout' directive.
-#
-#Default:
-# minimum_icp_query_timeout 5
-
-
-# MULTICAST ICP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: mcast_groups
-# This tag specifies a list of multicast groups which your server
-# should join to receive multicasted ICP queries.
-#
-# NOTE! Be very careful what you put here! Be sure you
-# understand the difference between an ICP _query_ and an ICP
-# _reply_. This option is to be set only if you want to RECEIVE
-# multicast queries. Do NOT set this option to SEND multicast
-# ICP (use cache_peer for that). ICP replies are always sent via
-# unicast, so this option does not affect whether or not you will
-# receive replies from multicast group members.
-#
-# You must be very careful to NOT use a multicast address which
-# is already in use by another group of caches.
-#
-# If you are unsure about multicast, please read the Multicast
-# chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/).
-#
-# Usage: mcast_groups 239.128.16.128 224.0.1.20
-#
-# By default, Squid doesn't listen on any multicast groups.
-#
-#Default:
-# none
-
-# TAG: mcast_miss_addr
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-multicast-miss option
-#
-# If you enable this option, every "cache miss" URL will
-# be sent out on the specified multicast address.
-#
-# Do not enable this option unless you are are absolutely
-# certain you understand what you are doing.
-#
-#Default:
-# mcast_miss_addr 255.255.255.255
-
-# TAG: mcast_miss_ttl
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-multicast-miss option
-#
-# This is the time-to-live value for packets multicasted
-# when multicasting off cache miss URLs is enabled. By
-# default this is set to 'site scope', i.e. 16.
-#
-#Default:
-# mcast_miss_ttl 16
-
-# TAG: mcast_miss_port
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-multicast-miss option
-#
-# This is the port number to be used in conjunction with
-# 'mcast_miss_addr'.
-#
-#Default:
-# mcast_miss_port 3135
-
-# TAG: mcast_miss_encode_key
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-multicast-miss option
-#
-# The URLs that are sent in the multicast miss stream are
-# encrypted. This is the encryption key.
-#
-#Default:
-# mcast_miss_encode_key XXXXXXXXXXXXXXXX
-
-# TAG: mcast_icp_query_timeout (msec)
-# For multicast peers, Squid regularly sends out ICP "probes" to
-# count how many other peers are listening on the given multicast
-# address. This value specifies how long Squid should wait to
-# count all the replies. The default is 2000 msec, or 2
-# seconds.
-#
-#Default:
-# mcast_icp_query_timeout 2000
-
-
-# INTERNAL ICON OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: icon_directory
-# Where the icons are stored. These are normally kept in
-# /usr/share/squid/icons
-#
-#Default:
-# icon_directory /usr/share/squid/icons
-
-# TAG: global_internal_static
-# This directive controls is Squid should intercept all requests for
-# /squid-internal-static/ no matter which host the URL is requesting
-# (default on setting), or if nothing special should be done for
-# such URLs (off setting). The purpose of this directive is to make
-# icons etc work better in complex cache hierarchies where it may
-# not always be possible for all corners in the cache mesh to reach
-# the server generating a directory listing.
-#
-#Default:
-# global_internal_static on
-
-# TAG: short_icon_urls
-# If this is enabled Squid will use short URLs for icons.
-#
-# If off the URLs for icons will always be absolute URLs
-# including the proxy name and port.
-#
-#Default:
-# short_icon_urls off
-
-
-# ERROR PAGE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: error_directory
-# If you wish to create your own versions of the default
-# (English) error files, either to customize them to suit your
-# language or company copy the template English files to another
-# directory and point this tag at them.
-#
-# The squid developers are interested in making squid available in
-# a wide variety of languages. If you are making translations for a
-# langauge that Squid does not currently provide please consider
-# contributing your translation back to the project.
-#
-#Default:
-# error_directory /usr/share/squid/errors/en
-
-# TAG: error_map
-# Map errors to custom messages
-#
-# error_map message_url http_status ...
-#
-# http_status ... is a list of HTTP status codes or Squid error
-# messages.
-#
-# Use in accelerators to substitute the error messages returned
-# by servers with other custom errors.
-#
-# error_map http://your.server/error/404.shtml 404
-#
-# Requests for error messages is a GET request for the configured
-# URL with the following special headers
-#
-# X-Error-Status: The received HTTP status code (i.e. 404)
-# X-Request-URI: The requested URI where the error occurred
-#
-# In Addition the following headers are forwarded from the client
-# request:
-#
-# User-Agent, Cookie, X-Forwarded-For, Via, Authorization,
-# Accept, Referer
-#
-# And the following headers from the server reply:
-#
-# Server, Via, Location, Content-Location
-#
-# The reply returned to the client will carry the original HTTP
-# headers from the real error message, but with the reply body
-# of the configured error message.
-#
-#
-#Default:
-# none
-
-# TAG: err_html_text
-# HTML text to include in error messages. Make this a "mailto"
-# URL to your admin address, or maybe just a link to your
-# organizations Web page.
-#
-# To include this in your error messages, you must rewrite
-# the error template files (found in the "errors" directory).
-# Wherever you want the 'err_html_text' line to appear,
-# insert a %L tag in the error template file.
-#
-#Default:
-# none
-
-# TAG: deny_info
-# Usage: deny_info err_page_name acl
-# or deny_info http://... acl
-# Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys
-#
-# This can be used to return a ERR_ page for requests which
-# do not pass the 'http_access' rules. Squid remembers the last
-# acl it evaluated in http_access, and if a 'deny_info' line exists
-# for that ACL Squid returns a corresponding error page.
-#
-# The acl is typically the last acl on the http_access deny line which
-# denied access. The exceptions to this rule are:
-# - When Squid needs to request authentication credentials. It's then
-# the first authentication related acl encountered
-# - When none of the http_access lines matches. It's then the last
-# acl processed on the last http_access line.
-#
-# You may use ERR_ pages that come with Squid or create your own pages
-# and put them into the configured errors/ directory.
-#
-# Alternatively you can specify an error URL. The browsers will
-# get redirected (302) to the specified URL. %s in the redirection
-# URL will be replaced by the requested URL.
-#
-# Alternatively you can tell Squid to reset the TCP connection
-# by specifying TCP_RESET.
-#
-#Default:
-# none
-
-
-# OPTIONS INFLUENCING REQUEST FORWARDING
-# -----------------------------------------------------------------------------
-
-# TAG: nonhierarchical_direct
-# By default, Squid will send any non-hierarchical requests
-# (matching hierarchy_stoplist or not cacheable request type) direct
-# to origin servers.
-#
-# If you set this to off, Squid will prefer to send these
-# requests to parents.
-#
-# Note that in most configurations, by turning this off you will only
-# add latency to these request without any improvement in global hit
-# ratio.
-#
-# If you are inside an firewall see never_direct instead of
-# this directive.
-#
-#Default:
-# nonhierarchical_direct on
-
-# TAG: prefer_direct
-# Normally Squid tries to use parents for most requests. If you for some
-# reason like it to first try going direct and only use a parent if
-# going direct fails set this to on.
-#
-# By combining nonhierarchical_direct off and prefer_direct on you
-# can set up Squid to use a parent as a backup path if going direct
-# fails.
-#
-# Note: If you want Squid to use parents for all requests see
-# the never_direct directive. prefer_direct only modifies how Squid
-# acts on cacheable requests.
-#
-#Default:
-# prefer_direct off
-
-# TAG: ignore_ims_on_miss on|off
-# This options makes Squid ignore If-Modified-Since on
-# cache misses. This is useful while the cache is
-# mostly empty to more quickly have the cache populated.
-#
-#Default:
-# ignore_ims_on_miss off
-
-# TAG: always_direct
-# Usage: always_direct allow|deny [!]aclname ...
-#
-# Here you can use ACL elements to specify requests which should
-# ALWAYS be forwarded by Squid to the origin servers without using
-# any peers. For example, to always directly forward requests for
-# local servers ignoring any parents or siblings you may have use
-# something like:
-#
-# acl local-servers dstdomain my.domain.net
-# always_direct allow local-servers
-#
-# To always forward FTP requests directly, use
-#
-# acl FTP proto FTP
-# always_direct allow FTP
-#
-# NOTE: There is a similar, but opposite option named
-# 'never_direct'. You need to be aware that "always_direct deny
-# foo" is NOT the same thing as "never_direct allow foo". You
-# may need to use a deny rule to exclude a more-specific case of
-# some other rule. Example:
-#
-# acl local-external dstdomain external.foo.net
-# acl local-servers dstdomain .foo.net
-# always_direct deny local-external
-# always_direct allow local-servers
-#
-# NOTE: If your goal is to make the client forward the request
-# directly to the origin server bypassing Squid then this needs
-# to be done in the client configuration. Squid configuration
-# can only tell Squid how Squid should fetch the object.
-#
-# NOTE: This directive is not related to caching. The replies
-# is cached as usual even if you use always_direct. To not cache
-# the replies see no_cache.
-#
-# This option replaces some v1.1 options such as local_domain
-# and local_ip.
-#
-#Default:
-# none
-
-# TAG: never_direct
-# Usage: never_direct allow|deny [!]aclname ...
-#
-# never_direct is the opposite of always_direct. Please read
-# the description for always_direct if you have not already.
-#
-# With 'never_direct' you can use ACL elements to specify
-# requests which should NEVER be forwarded directly to origin
-# servers. For example, to force the use of a proxy for all
-# requests, except those in your local domain use something like:
-#
-# acl local-servers dstdomain .foo.net
-# acl all src 0.0.0.0/0.0.0.0
-# never_direct deny local-servers
-# never_direct allow all
-#
-# or if Squid is inside a firewall and there are local intranet
-# servers inside the firewall use something like:
-#
-# acl local-intranet dstdomain .foo.net
-# acl local-external dstdomain external.foo.net
-# always_direct deny local-external
-# always_direct allow local-intranet
-# never_direct allow all
-#
-# This option replaces some v1.1 options such as inside_firewall
-# and firewall_ip.
-#
-#Default:
-# none
-
-
-# ADVANCED NETWORKING OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: max_filedescriptors
-# The maximum number of filedescriptors supported.
-#
-# The default "0" means Squid inherits the current ulimit setting.
-#
-# Note: Changing this requires a restart of Squid. Also
-# not all comm loops supports values larger than --with-maxfd.
-#
-#Default:
-# max_filedescriptors 0
-
-# TAG: accept_filter
-# FreeBSD:
-#
-# The name of an accept(2) filter to install on Squid's
-# listen socket(s). This feature is perhaps specific to
-# FreeBSD and requires support in the kernel.
-#
-# The 'httpready' filter delays delivering new connections
-# to Squid until a full HTTP request has been received.
-# See the accf_http(9) man page for details.
-#
-# The 'dataready' filter delays delivering new connections
-# to Squid until there is some data to process.
-# See the accf_dataready(9) man page for details.
-#
-# Linux:
-#
-# The 'data' filter delays delivering of new connections
-# to Squid until there is some data to process by TCP_ACCEPT_DEFER.
-# You may optionally specify a number of seconds to wait by
-# 'data=N' where N is the number of seconds. Defaults to 30
-# if not specified. See the tcp(7) man page for details.
-#EXAMPLE:
-## FreeBSD
-#accept_filter httpready
-## Linux
-#accept_filter data
-#
-#Default:
-# none
-
-# TAG: tcp_recv_bufsize (bytes)
-# Size of receive buffer to set for TCP sockets. Probably just
-# as easy to change your kernel's default. Set to zero to use
-# the default buffer size.
-#
-#Default:
-# tcp_recv_bufsize 0 bytes
-
-# TAG: incoming_rate
-# This directive controls how aggressive Squid should accept new
-# connections compared to processing existing connections.
-# The lower number the more frequent Squid will look for new
-# incoming requests.
-#
-#Default:
-# incoming_rate 30
-
-
-# DNS OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: check_hostnames
-# For security and stability reasons Squid by default checks
-# hostnames for Internet standard RFC compliance. If you do not want
-# Squid to perform these checks then turn this directive off.
-#
-#Default:
-# check_hostnames on
-
-# TAG: allow_underscore
-# Underscore characters is not strictly allowed in Internet hostnames
-# but nevertheless used by many sites. Set this to off if you want
-# Squid to be strict about the standard.
-# This check is performed only when check_hostnames is set to on.
-#
-#Default:
-# allow_underscore on
-
-# TAG: cache_dns_program
-# Note: This option is only available if Squid is rebuilt with the
-# --disable-internal-dns option
-#
-# Specify the location of the executable for dnslookup process.
-#
-#Default:
-# cache_dns_program /usr/lib/squid/dnsserver
-
-# TAG: dns_children
-# Note: This option is only available if Squid is rebuilt with the
-# --disable-internal-dns option
-#
-# The number of processes spawn to service DNS name lookups.
-# For heavily loaded caches on large servers, you should
-# probably increase this value to at least 10. The maximum
-# is 32. The default is 5.
-#
-# You must have at least one dnsserver process.
-#
-#Default:
-# dns_children 5
-
-# TAG: dns_retransmit_interval
-# Initial retransmit interval for DNS queries. The interval is
-# doubled each time all configured DNS servers have been tried.
-#
-#
-#Default:
-# dns_retransmit_interval 5 seconds
-
-# TAG: dns_timeout
-# DNS Query timeout. If no response is received to a DNS query
-# within this time all DNS servers for the queried domain
-# are assumed to be unavailable.
-#
-#Default:
-# dns_timeout 2 minutes
-
-# TAG: dns_defnames on|off
-# Normally the RES_DEFNAMES resolver option is disabled
-# (see res_init(3)). This prevents caches in a hierarchy
-# from interpreting single-component hostnames locally. To allow
-# Squid to handle single-component names, enable this option.
-#
-#Default:
-# dns_defnames off
-
-# TAG: dns_nameservers
-# Use this if you want to specify a list of DNS name servers
-# (IP addresses) to use instead of those given in your
-# /etc/resolv.conf file.
-# On Windows platforms, if no value is specified here or in
-# the /etc/resolv.conf file, the list of DNS name servers are
-# taken from the Windows registry, both static and dynamic DHCP
-# configurations are supported.
-#
-# Example: dns_nameservers 10.0.0.1 192.172.0.4
-#
-#Default:
-# none
-
-# TAG: hosts_file
-# Location of the host-local IP name-address associations
-# database. Most Operating Systems have such a file on different
-# default locations:
-# - Un*X & Linux: /etc/hosts
-# - Windows NT/2000: %SystemRoot%\system32\drivers\etc\hosts
-# (%SystemRoot% value install default is c:\winnt)
-# - Windows XP/2003: %SystemRoot%\system32\drivers\etc\hosts
-# (%SystemRoot% value install default is c:\windows)
-# - Windows 9x/Me: %windir%\hosts
-# (%windir% value is usually c:\windows)
-# - Cygwin: /etc/hosts
-#
-# The file contains newline-separated definitions, in the
-# form ip_address_in_dotted_form name [name ...] names are
-# whitespace-separated. Lines beginning with an hash (#)
-# character are comments.
-#
-# The file is checked at startup and upon configuration.
-# If set to 'none', it won't be checked.
-# If append_domain is used, that domain will be added to
-# domain-local (i.e. not containing any dot character) host
-# definitions.
-#
-#Default:
-# hosts_file /etc/hosts
-#
-hosts_file /etc/hosts
-
-# TAG: dns_testnames
-# The DNS tests exit as soon as the first site is successfully looked up
-#
-# This test can be disabled with the -D command line option.
-#
-#Default:
-# dns_testnames netscape.com internic.net nlanr.net microsoft.com
-
-# TAG: append_domain
-# Appends local domain name to hostnames without any dots in
-# them. append_domain must begin with a period.
-#
-# Be warned there are now Internet names with no dots in
-# them using only top-domain names, so setting this may
-# cause some Internet sites to become unavailable.
-#
-#Example:
-# append_domain .yourdomain.com
-#
-#Default:
-# none
-
-# TAG: ignore_unknown_nameservers
-# By default Squid checks that DNS responses are received
-# from the same IP addresses they are sent to. If they
-# don't match, Squid ignores the response and writes a warning
-# message to cache.log. You can allow responses from unknown
-# nameservers by setting this option to 'off'.
-#
-#Default:
-# ignore_unknown_nameservers on
-
-# TAG: ipcache_size (number of entries)
-# TAG: ipcache_low (percent)
-# TAG: ipcache_high (percent)
-# The size, low-, and high-water marks for the IP cache.
-#
-#Default:
-# ipcache_size 1024
-# ipcache_low 90
-# ipcache_high 95
-
-# TAG: fqdncache_size (number of entries)
-# Maximum number of FQDN cache entries.
-#
-#Default:
-# fqdncache_size 1024
-
-
-# MISCELLANEOUS
-# -----------------------------------------------------------------------------
-
-# TAG: memory_pools on|off
-# If set, Squid will keep pools of allocated (but unused) memory
-# available for future use. If memory is a premium on your
-# system and you believe your malloc library outperforms Squid
-# routines, disable this.
-#
-#Default:
-# memory_pools on
-
-# TAG: memory_pools_limit (bytes)
-# Used only with memory_pools on:
-# memory_pools_limit 50 MB
-#
-# If set to a non-zero value, Squid will keep at most the specified
-# limit of allocated (but unused) memory in memory pools. All free()
-# requests that exceed this limit will be handled by your malloc
-# library. Squid does not pre-allocate any memory, just safe-keeps
-# objects that otherwise would be free()d. Thus, it is safe to set
-# memory_pools_limit to a reasonably high value even if your
-# configuration will use less memory.
-#
-# If set to zero, Squid will keep all memory it can. That is, there
-# will be no limit on the total amount of memory used for safe-keeping.
-#
-# To disable memory allocation optimization, do not set
-# memory_pools_limit to 0. Set memory_pools to "off" instead.
-#
-# An overhead for maintaining memory pools is not taken into account
-# when the limit is checked. This overhead is close to four bytes per
-# object kept. However, pools may actually _save_ memory because of
-# reduced memory thrashing in your malloc library.
-#
-#Default:
-# memory_pools_limit 5 MB
-
-# TAG: forwarded_for on|off
-# If set, Squid will include your system's IP address or name
-# in the HTTP requests it forwards. By default it looks like
-# this:
-#
-# X-Forwarded-For: 192.1.2.3
-#
-# If you disable this, it will appear as
-#
-# X-Forwarded-For: unknown
-#
-#Default:
-# forwarded_for on
-
-# TAG: cachemgr_passwd
-# Specify passwords for cachemgr operations.
-#
-# Usage: cachemgr_passwd password action action ...
-#
-# Some valid actions are (see cache manager menu for a full list):
-# 5min
-# 60min
-# asndb
-# authenticator
-# cbdata
-# client_list
-# comm_incoming
-# config *
-# counters
-# delay
-# digest_stats
-# dns
-# events
-# filedescriptors
-# fqdncache
-# histograms
-# http_headers
-# info
-# io
-# ipcache
-# mem
-# menu
-# netdb
-# non_peers
-# objects
-# offline_toggle *
-# pconn
-# peer_select
-# reconfigure *
-# redirector
-# refresh
-# server_list
-# shutdown *
-# store_digest
-# storedir
-# utilization
-# via_headers
-# vm_objects
-#
-# * Indicates actions which will not be performed without a
-# valid password, others can be performed if not listed here.
-#
-# To disable an action, set the password to "disable".
-# To allow performing an action without a password, set the
-# password to "none".
-#
-# Use the keyword "all" to set the same password for all actions.
-#
-#Example:
-# cachemgr_passwd secret shutdown
-# cachemgr_passwd lesssssssecret info stats/objects
-# cachemgr_passwd disable all
-#
-#Default:
-# none
-
-# TAG: client_db on|off
-# If you want to disable collecting per-client statistics,
-# turn off client_db here.
-#
-#Default:
-# client_db on
-
-# TAG: reload_into_ims on|off
-# When you enable this option, client no-cache or ``reload''
-# requests will be changed to If-Modified-Since requests.
-# Doing this VIOLATES the HTTP standard. Enabling this
-# feature could make you liable for problems which it
-# causes.
-#
-# see also refresh_pattern for a more selective approach.
-#
-#Default:
-# reload_into_ims off
-
-# TAG: maximum_single_addr_tries
-# This sets the maximum number of connection attempts for a
-# host that only has one address (for multiple-address hosts,
-# each address is tried once).
-#
-# The default value is one attempt, the (not recommended)
-# maximum is 255 tries. A warning message will be generated
-# if it is set to a value greater than ten.
-#
-# Note: This is in addition to the request re-forwarding which
-# takes place if Squid fails to get a satisfying response.
-#
-#Default:
-# maximum_single_addr_tries 1
-
-# TAG: retry_on_error
-# If set to on Squid will automatically retry requests when
-# receiving an error response. This is mainly useful if you
-# are in a complex cache hierarchy to work around access
-# control errors.
-#
-#Default:
-# retry_on_error off
-
-# TAG: as_whois_server
-# WHOIS server to query for AS numbers. NOTE: AS numbers are
-# queried only when Squid starts up, not for every request.
-#
-#Default:
-# as_whois_server whois.ra.net
-# as_whois_server whois.ra.net
-
-# TAG: offline_mode
-# Enable this option and Squid will never try to validate cached
-# objects.
-#
-#Default:
-# offline_mode off
-
-# TAG: uri_whitespace
-# What to do with requests that have whitespace characters in the
-# URI. Options:
-#
-# strip: The whitespace characters are stripped out of the URL.
-# This is the behavior recommended by RFC2396.
-# deny: The request is denied. The user receives an "Invalid
-# Request" message.
-# allow: The request is allowed and the URI is not changed. The
-# whitespace characters remain in the URI. Note the
-# whitespace is passed to redirector processes if they
-# are in use.
-# encode: The request is allowed and the whitespace characters are
-# encoded according to RFC1738. This could be considered
-# a violation of the HTTP/1.1
-# RFC because proxies are not allowed to rewrite URI's.
-# chop: The request is allowed and the URI is chopped at the
-# first whitespace. This might also be considered a
-# violation.
-#
-#Default:
-# uri_whitespace strip
-
-# TAG: coredump_dir
-# By default Squid leaves core files in the directory from where
-# it was started. If you set 'coredump_dir' to a directory
-# that exists, Squid will chdir() to that directory at startup
-# and coredump files will be left there.
-#
-#Default:
-# coredump_dir none
-#
-# Leave coredumps in the first cache dir
-coredump_dir /var/spool/squid
-
-# TAG: chroot
-# Use this to have Squid do a chroot() while initializing. This
-# also causes Squid to fully drop root privileges after
-# initializing. This means, for example, if you use a HTTP
-# port less than 1024 and try to reconfigure, you will may get an
-# error saying that Squid can not open the port.
-#
-#Default:
-# none
-
-# TAG: balance_on_multiple_ip
-# Some load balancing servers based on round robin DNS have been
-# found not to preserve user session state across requests
-# to different IP addresses.
-#
-# By default Squid rotates IP's per request. By disabling
-# this directive only connection failure triggers rotation.
-#
-#Default:
-# balance_on_multiple_ip on
-
-# TAG: pipeline_prefetch
-# To boost the performance of pipelined requests to closer
-# match that of a non-proxied environment Squid can try to fetch
-# up to two requests in parallel from a pipeline.
-#
-# Defaults to off for bandwidth management and access logging
-# reasons.
-#
-#Default:
-# pipeline_prefetch off
-
-# TAG: high_response_time_warning (msec)
-# If the one-minute median response time exceeds this value,
-# Squid prints a WARNING with debug level 0 to get the
-# administrators attention. The value is in milliseconds.
-#
-#Default:
-# high_response_time_warning 0
-
-# TAG: high_page_fault_warning
-# If the one-minute average page fault rate exceeds this
-# value, Squid prints a WARNING with debug level 0 to get
-# the administrators attention. The value is in page faults
-# per second.
-#
-#Default:
-# high_page_fault_warning 0
-
-# TAG: high_memory_warning
-# If the memory usage (as determined by mallinfo) exceeds
-# this amount, Squid prints a WARNING with debug level 0 to get
-# the administrators attention.
-#
-#Default:
-# high_memory_warning 0 KB
-
-# TAG: sleep_after_fork (microseconds)
-# When this is set to a non-zero value, the main Squid process
-# sleeps the specified number of microseconds after a fork()
-# system call. This sleep may help the situation where your
-# system reports fork() failures due to lack of (virtual)
-# memory. Note, however, if you have a lot of child
-# processes, these sleep delays will add up and your
-# Squid will not service requests for some amount of time
-# until all the child processes have been started.
-# On Windows value less then 1000 (1 milliseconds) are
-# rounded to 1000.
-#
-#Default:
-# sleep_after_fork 0
-
-# TAG: zero_buffers on|off
-# Squid by default will zero all buffers before using or reusing them.
-# Setting this to 'off' will result in fixed-sized temporary buffers
-# not being zero'ed. This may give a performance boost on certain
-# platforms but it may result in undefined behaviour at the present
-# time.
-#
-#Default:
-# zero_buffers on
-
-# TAG: windows_ipaddrchangemonitor on|off
-# On Windows Squid by default will monitor IP address changes and will
-# reconfigure itself after any detected event. This is very useful for
-# proxies connected to internet with dial-up interfaces.
-# In some cases (a Proxy server acting as VPN gateway is one) it could be
-# desiderable to disable this behaviour setting this to 'off'.
-# Note: after changing this, Squid service must be restarted.
-#
-#Default:
-# windows_ipaddrchangemonitor on
-