summaryrefslogtreecommitdiffstats
path: root/hosts/profitbricks-build7-amd64/etc/squid3
diff options
context:
space:
mode:
authorPhilip Hands <phil@hands.com>2017-06-30 22:49:24 +0200
committerHolger Levsen <holger@layer-acht.org>2017-08-01 00:53:59 -0400
commit72d154f9bdb8d4792fa2bff0cccaad8bf2f8069a (patch)
tree80859caebcdd8953304e22f0e5d39fe91a0382bd /hosts/profitbricks-build7-amd64/etc/squid3
parent8d0a6d3fafa6e5f6e85cf3aeeb183f094d95fd0f (diff)
downloadjenkins.debian.net-72d154f9bdb8d4792fa2bff0cccaad8bf2f8069a.tar.xz
stretch upgrade: squid3 --> squid
Signed-off-by: Holger Levsen <holger@layer-acht.org>
Diffstat (limited to 'hosts/profitbricks-build7-amd64/etc/squid3')
-rw-r--r--hosts/profitbricks-build7-amd64/etc/squid3/squid.conf7968
1 files changed, 0 insertions, 7968 deletions
diff --git a/hosts/profitbricks-build7-amd64/etc/squid3/squid.conf b/hosts/profitbricks-build7-amd64/etc/squid3/squid.conf
deleted file mode 100644
index 9f4b4272..00000000
--- a/hosts/profitbricks-build7-amd64/etc/squid3/squid.conf
+++ /dev/null
@@ -1,7968 +0,0 @@
-# WELCOME TO SQUID 3.5.22
-# ----------------------------
-#
-# This is the documentation for the Squid configuration file.
-# This documentation can also be found online at:
-# http://www.squid-cache.org/Doc/config/
-#
-# You may wish to look at the Squid home page and wiki for the
-# FAQ and other documentation:
-# http://www.squid-cache.org/
-# http://wiki.squid-cache.org/SquidFaq
-# http://wiki.squid-cache.org/ConfigExamples
-#
-# This documentation shows what the defaults for various directives
-# happen to be. If you don't need to change the default, you should
-# leave the line out of your squid.conf in most cases.
-#
-# In some cases "none" refers to no default setting at all,
-# while in other cases it refers to the value of the option
-# - the comments for that keyword indicate if this is the case.
-#
-
-# Configuration options can be included using the "include" directive.
-# Include takes a list of files to include. Quoting and wildcards are
-# supported.
-#
-# For example,
-#
-# include /path/to/included/file/squid.acl.config
-#
-# Includes can be nested up to a hard-coded depth of 16 levels.
-# This arbitrary restriction is to prevent recursive include references
-# from causing Squid entering an infinite loop whilst trying to load
-# configuration files.
-#
-# Values with byte units
-#
-# Squid accepts size units on some size related directives. All
-# such directives are documented with a default value displaying
-# a unit.
-#
-# Units accepted by Squid are:
-# bytes - byte
-# KB - Kilobyte (1024 bytes)
-# MB - Megabyte
-# GB - Gigabyte
-#
-# Values with spaces, quotes, and other special characters
-#
-# Squid supports directive parameters with spaces, quotes, and other
-# special characters. Surround such parameters with "double quotes". Use
-# the configuration_includes_quoted_values directive to enable or
-# disable that support.
-#
-# Squid supports reading configuration option parameters from external
-# files using the syntax:
-# parameters("/path/filename")
-# For example:
-# acl whitelist dstdomain parameters("/etc/squid/whitelist.txt")
-#
-# Conditional configuration
-#
-# If-statements can be used to make configuration directives
-# depend on conditions:
-#
-# if <CONDITION>
-# ... regular configuration directives ...
-# [else
-# ... regular configuration directives ...]
-# endif
-#
-# The else part is optional. The keywords "if", "else", and "endif"
-# must be typed on their own lines, as if they were regular
-# configuration directives.
-#
-# NOTE: An else-if condition is not supported.
-#
-# These individual conditions types are supported:
-#
-# true
-# Always evaluates to true.
-# false
-# Always evaluates to false.
-# <integer> = <integer>
-# Equality comparison of two integer numbers.
-#
-#
-# SMP-Related Macros
-#
-# The following SMP-related preprocessor macros can be used.
-#
-# ${process_name} expands to the current Squid process "name"
-# (e.g., squid1, squid2, or cache1).
-#
-# ${process_number} expands to the current Squid process
-# identifier, which is an integer number (e.g., 1, 2, 3) unique
-# across all Squid processes of the current service instance.
-#
-# ${service_name} expands into the current Squid service instance
-# name identifier which is provided by -n on the command line.
-#
-
-# TAG: broken_vary_encoding
-# This option is not yet supported by Squid-3.
-#Default:
-# none
-
-# TAG: cache_vary
-# This option is not yet supported by Squid-3.
-#Default:
-# none
-
-# TAG: error_map
-# This option is not yet supported by Squid-3.
-#Default:
-# none
-
-# TAG: external_refresh_check
-# This option is not yet supported by Squid-3.
-#Default:
-# none
-
-# TAG: location_rewrite_program
-# This option is not yet supported by Squid-3.
-#Default:
-# none
-
-# TAG: refresh_stale_hit
-# This option is not yet supported by Squid-3.
-#Default:
-# none
-
-# TAG: hierarchy_stoplist
-# Remove this line. Use always_direct or cache_peer_access ACLs instead if you need to prevent cache_peer use.
-#Default:
-# none
-
-# TAG: log_access
-# Remove this line. Use acls with access_log directives to control access logging
-#Default:
-# none
-
-# TAG: log_icap
-# Remove this line. Use acls with icap_log directives to control icap logging
-#Default:
-# none
-
-# TAG: ignore_ims_on_miss
-# Remove this line. The HTTP/1.1 feature is now configured by 'cache_miss_revalidate'.
-#Default:
-# none
-
-# TAG: chunked_request_body_max_size
-# Remove this line. Squid is now HTTP/1.1 compliant.
-#Default:
-# none
-
-# TAG: dns_v4_fallback
-# Remove this line. Squid performs a 'Happy Eyeballs' algorithm, the 'fallback' algorithm is no longer relevant.
-#Default:
-# none
-
-# TAG: emulate_httpd_log
-# Replace this with an access_log directive using the format 'common' or 'combined'.
-#Default:
-# none
-
-# TAG: forward_log
-# Use a regular access.log with ACL limiting it to MISS events.
-#Default:
-# none
-
-# TAG: ftp_list_width
-# Remove this line. Configure FTP page display using the CSS controls in errorpages.css instead.
-#Default:
-# none
-
-# TAG: ignore_expect_100
-# Remove this line. The HTTP/1.1 feature is now fully supported by default.
-#Default:
-# none
-
-# TAG: log_fqdn
-# Remove this option from your config. To log FQDN use %>A in the log format.
-#Default:
-# none
-
-# TAG: log_ip_on_direct
-# Remove this option from your config. To log server or peer names use %<A in the log format.
-#Default:
-# none
-
-# TAG: maximum_single_addr_tries
-# Replaced by connect_retries. The behaviour has changed, please read the documentation before altering.
-#Default:
-# none
-
-# TAG: referer_log
-# Replace this with an access_log directive using the format 'referrer'.
-#Default:
-# none
-
-# TAG: update_headers
-# Remove this line. The feature is supported by default in storage types where update is implemented.
-#Default:
-# none
-
-# TAG: url_rewrite_concurrency
-# Remove this line. Set the 'concurrency=' option of url_rewrite_children instead.
-#Default:
-# none
-
-# TAG: useragent_log
-# Replace this with an access_log directive using the format 'useragent'.
-#Default:
-# none
-
-# TAG: dns_testnames
-# Remove this line. DNS is no longer tested on startup.
-#Default:
-# none
-
-# TAG: extension_methods
-# Remove this line. All valid methods for HTTP are accepted by default.
-#Default:
-# none
-
-# TAG: zero_buffers
-#Default:
-# none
-
-# TAG: incoming_rate
-#Default:
-# none
-
-# TAG: server_http11
-# Remove this line. HTTP/1.1 is supported by default.
-#Default:
-# none
-
-# TAG: upgrade_http0.9
-# Remove this line. ICY/1.0 streaming protocol is supported by default.
-#Default:
-# none
-
-# TAG: zph_local
-# Alter these entries. Use the qos_flows directive instead.
-#Default:
-# none
-
-# TAG: header_access
-# Since squid-3.0 replace with request_header_access or reply_header_access
-# depending on whether you wish to match client requests or server replies.
-#Default:
-# none
-
-# TAG: httpd_accel_no_pmtu_disc
-# Since squid-3.0 use the 'disable-pmtu-discovery' flag on http_port instead.
-#Default:
-# none
-
-# TAG: wais_relay_host
-# Replace this line with 'cache_peer' configuration.
-#Default:
-# none
-
-# TAG: wais_relay_port
-# Replace this line with 'cache_peer' configuration.
-#Default:
-# none
-
-# OPTIONS FOR SMP
-# -----------------------------------------------------------------------------
-
-# TAG: workers
-# Number of main Squid processes or "workers" to fork and maintain.
-# 0: "no daemon" mode, like running "squid -N ..."
-# 1: "no SMP" mode, start one main Squid process daemon (default)
-# N: start N main Squid process daemons (i.e., SMP mode)
-#
-# In SMP mode, each worker does nearly all what a single Squid daemon
-# does (e.g., listen on http_port and forward HTTP requests).
-#Default:
-# SMP support disabled.
-
-# TAG: cpu_affinity_map
-# Usage: cpu_affinity_map process_numbers=P1,P2,... cores=C1,C2,...
-#
-# Sets 1:1 mapping between Squid processes and CPU cores. For example,
-#
-# cpu_affinity_map process_numbers=1,2,3,4 cores=1,3,5,7
-#
-# affects processes 1 through 4 only and places them on the first
-# four even cores, starting with core #1.
-#
-# CPU cores are numbered starting from 1. Requires support for
-# sched_getaffinity(2) and sched_setaffinity(2) system calls.
-#
-# Multiple cpu_affinity_map options are merged.
-#
-# See also: workers
-#Default:
-# Let operating system decide.
-
-# OPTIONS FOR AUTHENTICATION
-# -----------------------------------------------------------------------------
-
-# TAG: auth_param
-# This is used to define parameters for the various authentication
-# schemes supported by Squid.
-#
-# format: auth_param scheme parameter [setting]
-#
-# The order in which authentication schemes are presented to the client is
-# dependent on the order the scheme first appears in config file. IE
-# has a bug (it's not RFC 2617 compliant) in that it will use the basic
-# scheme if basic is the first entry presented, even if more secure
-# schemes are presented. For now use the order in the recommended
-# settings section below. If other browsers have difficulties (don't
-# recognize the schemes offered even if you are using basic) either
-# put basic first, or disable the other schemes (by commenting out their
-# program entry).
-#
-# Once an authentication scheme is fully configured, it can only be
-# shutdown by shutting squid down and restarting. Changes can be made on
-# the fly and activated with a reconfigure. I.E. You can change to a
-# different helper, but not unconfigure the helper completely.
-#
-# Please note that while this directive defines how Squid processes
-# authentication it does not automatically activate authentication.
-# To use authentication you must in addition make use of ACLs based
-# on login name in http_access (proxy_auth, proxy_auth_regex or
-# external with %LOGIN used in the format tag). The browser will be
-# challenged for authentication on the first such acl encountered
-# in http_access processing and will also be re-challenged for new
-# login credentials if the request is being denied by a proxy_auth
-# type acl.
-#
-# WARNING: authentication can't be used in a transparently intercepting
-# proxy as the client then thinks it is talking to an origin server and
-# not the proxy. This is a limitation of bending the TCP/IP protocol to
-# transparently intercepting port 80, not a limitation in Squid.
-# Ports flagged 'transparent', 'intercept', or 'tproxy' have
-# authentication disabled.
-#
-# === Parameters common to all schemes. ===
-#
-# "program" cmdline
-# Specifies the command for the external authenticator.
-#
-# By default, each authentication scheme is not used unless a
-# program is specified.
-#
-# See http://wiki.squid-cache.org/Features/AddonHelpers for
-# more details on helper operations and creating your own.
-#
-# "key_extras" format
-# Specifies a string to be append to request line format for
-# the authentication helper. "Quoted" format values may contain
-# spaces and logformat %macros. In theory, any logformat %macro
-# can be used. In practice, a %macro expands as a dash (-) if
-# the helper request is sent before the required macro
-# information is available to Squid.
-#
-# By default, Squid uses request formats provided in
-# scheme-specific examples below (search for %credentials).
-#
-# The expanded key_extras value is added to the Squid credentials
-# cache and, hence, will affect authentication. It can be used to
-# autenticate different users with identical user names (e.g.,
-# when user authentication depends on http_port).
-#
-# Avoid adding frequently changing information to key_extras. For
-# example, if you add user source IP, and it changes frequently
-# in your environment, then max_user_ip ACL is going to treat
-# every user+IP combination as a unique "user", breaking the ACL
-# and wasting a lot of memory on those user records. It will also
-# force users to authenticate from scratch whenever their IP
-# changes.
-#
-# "realm" string
-# Specifies the protection scope (aka realm name) which is to be
-# reported to the client for the authentication scheme. It is
-# commonly part of the text the user will see when prompted for
-# their username and password.
-#
-# For Basic the default is "Squid proxy-caching web server".
-# For Digest there is no default, this parameter is mandatory.
-# For NTLM and Negotiate this parameter is ignored.
-#
-# "children" numberofchildren [startup=N] [idle=N] [concurrency=N]
-#
-# The maximum number of authenticator processes to spawn. If
-# you start too few Squid will have to wait for them to process
-# a backlog of credential verifications, slowing it down. When
-# password verifications are done via a (slow) network you are
-# likely to need lots of authenticator processes.
-#
-# The startup= and idle= options permit some skew in the exact
-# amount run. A minimum of startup=N will begin during startup
-# and reconfigure. Squid will start more in groups of up to
-# idle=N in an attempt to meet traffic needs and to keep idle=N
-# free above those traffic needs up to the maximum.
-#
-# The concurrency= option sets the number of concurrent requests
-# the helper can process. The default of 0 is used for helpers
-# who only supports one request at a time. Setting this to a
-# number greater than 0 changes the protocol used to include a
-# channel ID field first on the request/response line, allowing
-# multiple requests to be sent to the same helper in parallel
-# without waiting for the response.
-#
-# Concurrency must not be set unless it's known the helper
-# supports the input format with channel-ID fields.
-#
-# NOTE: NTLM and Negotiate schemes do not support concurrency
-# in the Squid code module even though some helpers can.
-#
-#
-#
-# === Example Configuration ===
-#
-# This configuration displays the recommended authentication scheme
-# order from most to least secure with recommended minimum configuration
-# settings for each scheme:
-#
-##auth_param negotiate program <uncomment and complete this line to activate>
-##auth_param negotiate children 20 startup=0 idle=1
-##auth_param negotiate keep_alive on
-##
-##auth_param digest program <uncomment and complete this line to activate>
-##auth_param digest children 20 startup=0 idle=1
-##auth_param digest realm Squid proxy-caching web server
-##auth_param digest nonce_garbage_interval 5 minutes
-##auth_param digest nonce_max_duration 30 minutes
-##auth_param digest nonce_max_count 50
-##
-##auth_param ntlm program <uncomment and complete this line to activate>
-##auth_param ntlm children 20 startup=0 idle=1
-##auth_param ntlm keep_alive on
-##
-##auth_param basic program <uncomment and complete this line>
-##auth_param basic children 5 startup=5 idle=1
-##auth_param basic realm Squid proxy-caching web server
-##auth_param basic credentialsttl 2 hours
-#Default:
-# none
-
-# TAG: authenticate_cache_garbage_interval
-# The time period between garbage collection across the username cache.
-# This is a trade-off between memory utilization (long intervals - say
-# 2 days) and CPU (short intervals - say 1 minute). Only change if you
-# have good reason to.
-#Default:
-# authenticate_cache_garbage_interval 1 hour
-
-# TAG: authenticate_ttl
-# The time a user & their credentials stay in the logged in
-# user cache since their last request. When the garbage
-# interval passes, all user credentials that have passed their
-# TTL are removed from memory.
-#Default:
-# authenticate_ttl 1 hour
-
-# TAG: authenticate_ip_ttl
-# If you use proxy authentication and the 'max_user_ip' ACL,
-# this directive controls how long Squid remembers the IP
-# addresses associated with each user. Use a small value
-# (e.g., 60 seconds) if your users might change addresses
-# quickly, as is the case with dialup. You might be safe
-# using a larger value (e.g., 2 hours) in a corporate LAN
-# environment with relatively static address assignments.
-#Default:
-# authenticate_ip_ttl 1 second
-
-# ACCESS CONTROLS
-# -----------------------------------------------------------------------------
-
-# TAG: external_acl_type
-# This option defines external acl classes using a helper program
-# to look up the status
-#
-# external_acl_type name [options] FORMAT.. /path/to/helper [helper arguments..]
-#
-# Options:
-#
-# ttl=n TTL in seconds for cached results (defaults to 3600
-# for 1 hour)
-#
-# negative_ttl=n
-# TTL for cached negative lookups (default same
-# as ttl)
-#
-# grace=n Percentage remaining of TTL where a refresh of a
-# cached entry should be initiated without needing to
-# wait for a new reply. (default is for no grace period)
-#
-# cache=n The maximum number of entries in the result cache. The
-# default limit is 262144 entries. Each cache entry usually
-# consumes at least 256 bytes. Squid currently does not remove
-# expired cache entries until the limit is reached, so a proxy
-# will sooner or later reach the limit. The expanded FORMAT
-# value is used as the cache key, so if the details in FORMAT
-# are highly variable, a larger cache may be needed to produce
-# reduction in helper load.
-#
-# children-max=n
-# Maximum number of acl helper processes spawned to service
-# external acl lookups of this type. (default 20)
-#
-# children-startup=n
-# Minimum number of acl helper processes to spawn during
-# startup and reconfigure to service external acl lookups
-# of this type. (default 0)
-#
-# children-idle=n
-# Number of acl helper processes to keep ahead of traffic
-# loads. Squid will spawn this many at once whenever load
-# rises above the capabilities of existing processes.
-# Up to the value of children-max. (default 1)
-#
-# concurrency=n concurrency level per process. Only used with helpers
-# capable of processing more than one query at a time.
-#
-# protocol=2.5 Compatibility mode for Squid-2.5 external acl helpers.
-#
-# ipv4 / ipv6 IP protocol used to communicate with this helper.
-# The default is to auto-detect IPv6 and use it when available.
-#
-#
-# FORMAT specifications
-#
-# %LOGIN Authenticated user login name
-# %un A user name. Expands to the first available name
-# from the following list of information sources:
-# - authenticated user name, like %ul or %LOGIN
-# - user name sent by an external ACL, like %EXT_USER
-# - SSL client name, like %us in logformat
-# - ident user name, like %ui in logformat
-# %EXT_USER Username from previous external acl
-# %EXT_LOG Log details from previous external acl
-# %EXT_TAG Tag from previous external acl
-# %IDENT Ident user name
-# %SRC Client IP
-# %SRCPORT Client source port
-# %URI Requested URI
-# %DST Requested host
-# %PROTO Requested URL scheme
-# %PORT Requested port
-# %PATH Requested URL path
-# %METHOD Request method
-# %MYADDR Squid interface address
-# %MYPORT Squid http_port number
-# %PATH Requested URL-path (including query-string if any)
-# %USER_CERT SSL User certificate in PEM format
-# %USER_CERTCHAIN SSL User certificate chain in PEM format
-# %USER_CERT_xx SSL User certificate subject attribute xx
-# %USER_CA_CERT_xx SSL User certificate issuer attribute xx
-# %ssl::>sni SSL client SNI sent to Squid
-# %ssl::<cert_subject SSL server certificate DN
-# %ssl::<cert_issuer SSL server certificate issuer DN
-#
-# %>{Header} HTTP request header "Header"
-# %>{Hdr:member}
-# HTTP request header "Hdr" list member "member"
-# %>{Hdr:;member}
-# HTTP request header list member using ; as
-# list separator. ; can be any non-alphanumeric
-# character.
-#
-# %<{Header} HTTP reply header "Header"
-# %<{Hdr:member}
-# HTTP reply header "Hdr" list member "member"
-# %<{Hdr:;member}
-# HTTP reply header list member using ; as
-# list separator. ; can be any non-alphanumeric
-# character.
-#
-# %ACL The name of the ACL being tested.
-# %DATA The ACL arguments. If not used then any arguments
-# is automatically added at the end of the line
-# sent to the helper.
-# NOTE: this will encode the arguments as one token,
-# whereas the default will pass each separately.
-#
-# %% The percent sign. Useful for helpers which need
-# an unchanging input format.
-#
-#
-# General request syntax:
-#
-# [channel-ID] FORMAT-values [acl-values ...]
-#
-#
-# FORMAT-values consists of transaction details expanded with
-# whitespace separation per the config file FORMAT specification
-# using the FORMAT macros listed above.
-#
-# acl-values consists of any string specified in the referencing
-# config 'acl ... external' line. see the "acl external" directive.
-#
-# Request values sent to the helper are URL escaped to protect
-# each value in requests against whitespaces.
-#
-# If using protocol=2.5 then the request sent to the helper is not
-# URL escaped to protect against whitespace.
-#
-# NOTE: protocol=3.0 is deprecated as no longer necessary.
-#
-# When using the concurrency= option the protocol is changed by
-# introducing a query channel tag in front of the request/response.
-# The query channel tag is a number between 0 and concurrency-1.
-# This value must be echoed back unchanged to Squid as the first part
-# of the response relating to its request.
-#
-#
-# The helper receives lines expanded per the above format specification
-# and for each input line returns 1 line starting with OK/ERR/BH result
-# code and optionally followed by additional keywords with more details.
-#
-#
-# General result syntax:
-#
-# [channel-ID] result keyword=value ...
-#
-# Result consists of one of the codes:
-#
-# OK
-# the ACL test produced a match.
-#
-# ERR
-# the ACL test does not produce a match.
-#
-# BH
-# An internal error occurred in the helper, preventing
-# a result being identified.
-#
-# The meaning of 'a match' is determined by your squid.conf
-# access control configuration. See the Squid wiki for details.
-#
-# Defined keywords:
-#
-# user= The users name (login)
-#
-# password= The users password (for login= cache_peer option)
-#
-# message= Message describing the reason for this response.
-# Available as %o in error pages.
-# Useful on (ERR and BH results).
-#
-# tag= Apply a tag to a request. Only sets a tag once,
-# does not alter existing tags.
-#
-# log= String to be logged in access.log. Available as
-# %ea in logformat specifications.
-#
-# clt_conn_tag= Associates a TAG with the client TCP connection.
-# Please see url_rewrite_program related documentation
-# for this kv-pair.
-#
-# Any keywords may be sent on any response whether OK, ERR or BH.
-#
-# All response keyword values need to be a single token with URL
-# escaping, or enclosed in double quotes (") and escaped using \ on
-# any double quotes or \ characters within the value. The wrapping
-# double quotes are removed before the value is interpreted by Squid.
-# \r and \n are also replace by CR and LF.
-#
-# Some example key values:
-#
-# user=John%20Smith
-# user="John Smith"
-# user="J. \"Bob\" Smith"
-#Default:
-# none
-
-# TAG: acl
-# Defining an Access List
-#
-# Every access list definition must begin with an aclname and acltype,
-# followed by either type-specific arguments or a quoted filename that
-# they are read from.
-#
-# acl aclname acltype argument ...
-# acl aclname acltype "file" ...
-#
-# When using "file", the file should contain one item per line.
-#
-# Some acl types supports options which changes their default behaviour.
-# The available options are:
-#
-# -i,+i By default, regular expressions are CASE-SENSITIVE. To make them
-# case-insensitive, use the -i option. To return case-sensitive
-# use the +i option between patterns, or make a new ACL line
-# without -i.
-#
-# -n Disable lookups and address type conversions. If lookup or
-# conversion is required because the parameter type (IP or
-# domain name) does not match the message address type (domain
-# name or IP), then the ACL would immediately declare a mismatch
-# without any warnings or lookups.
-#
-# -- Used to stop processing all options, in the case the first acl
-# value has '-' character as first character (for example the '-'
-# is a valid domain name)
-#
-# Some acl types require suspending the current request in order
-# to access some external data source.
-# Those which do are marked with the tag [slow], those which
-# don't are marked as [fast].
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl
-# for further information
-#
-# ***** ACL TYPES AVAILABLE *****
-#
-# acl aclname src ip-address/mask ... # clients IP address [fast]
-# acl aclname src addr1-addr2/mask ... # range of addresses [fast]
-# acl aclname dst [-n] ip-address/mask ... # URL host's IP address [slow]
-# acl aclname localip ip-address/mask ... # IP address the client connected to [fast]
-#
-# acl aclname arp mac-address ... (xx:xx:xx:xx:xx:xx notation)
-# # [fast]
-# # The 'arp' ACL code is not portable to all operating systems.
-# # It works on Linux, Solaris, Windows, FreeBSD, and some other
-# # BSD variants.
-# #
-# # NOTE: Squid can only determine the MAC/EUI address for IPv4
-# # clients that are on the same subnet. If the client is on a
-# # different subnet, then Squid cannot find out its address.
-# #
-# # NOTE 2: IPv6 protocol does not contain ARP. MAC/EUI is either
-# # encoded directly in the IPv6 address or not available.
-#
-# acl aclname srcdomain .foo.com ...
-# # reverse lookup, from client IP [slow]
-# acl aclname dstdomain [-n] .foo.com ...
-# # Destination server from URL [fast]
-# acl aclname srcdom_regex [-i] \.foo\.com ...
-# # regex matching client name [slow]
-# acl aclname dstdom_regex [-n] [-i] \.foo\.com ...
-# # regex matching server [fast]
-# #
-# # For dstdomain and dstdom_regex a reverse lookup is tried if a IP
-# # based URL is used and no match is found. The name "none" is used
-# # if the reverse lookup fails.
-#
-# acl aclname src_as number ...
-# acl aclname dst_as number ...
-# # [fast]
-# # Except for access control, AS numbers can be used for
-# # routing of requests to specific caches. Here's an
-# # example for routing all requests for AS#1241 and only
-# # those to mycache.mydomain.net:
-# # acl asexample dst_as 1241
-# # cache_peer_access mycache.mydomain.net allow asexample
-# # cache_peer_access mycache_mydomain.net deny all
-#
-# acl aclname peername myPeer ...
-# # [fast]
-# # match against a named cache_peer entry
-# # set unique name= on cache_peer lines for reliable use.
-#
-# acl aclname time [day-abbrevs] [h1:m1-h2:m2]
-# # [fast]
-# # day-abbrevs:
-# # S - Sunday
-# # M - Monday
-# # T - Tuesday
-# # W - Wednesday
-# # H - Thursday
-# # F - Friday
-# # A - Saturday
-# # h1:m1 must be less than h2:m2
-#
-# acl aclname url_regex [-i] ^http:// ...
-# # regex matching on whole URL [fast]
-# acl aclname urllogin [-i] [^a-zA-Z0-9] ...
-# # regex matching on URL login field
-# acl aclname urlpath_regex [-i] \.gif$ ...
-# # regex matching on URL path [fast]
-#
-# acl aclname port 80 70 21 0-1024... # destination TCP port [fast]
-# # ranges are alloed
-# acl aclname localport 3128 ... # TCP port the client connected to [fast]
-# # NP: for interception mode this is usually '80'
-#
-# acl aclname myportname 3128 ... # *_port name [fast]
-#
-# acl aclname proto HTTP FTP ... # request protocol [fast]
-#
-# acl aclname method GET POST ... # HTTP request method [fast]
-#
-# acl aclname http_status 200 301 500- 400-403 ...
-# # status code in reply [fast]
-#
-# acl aclname browser [-i] regexp ...
-# # pattern match on User-Agent header (see also req_header below) [fast]
-#
-# acl aclname referer_regex [-i] regexp ...
-# # pattern match on Referer header [fast]
-# # Referer is highly unreliable, so use with care
-#
-# acl aclname ident username ...
-# acl aclname ident_regex [-i] pattern ...
-# # string match on ident output [slow]
-# # use REQUIRED to accept any non-null ident.
-#
-# acl aclname proxy_auth [-i] username ...
-# acl aclname proxy_auth_regex [-i] pattern ...
-# # perform http authentication challenge to the client and match against
-# # supplied credentials [slow]
-# #
-# # takes a list of allowed usernames.
-# # use REQUIRED to accept any valid username.
-# #
-# # Will use proxy authentication in forward-proxy scenarios, and plain
-# # http authenticaiton in reverse-proxy scenarios
-# #
-# # NOTE: when a Proxy-Authentication header is sent but it is not
-# # needed during ACL checking the username is NOT logged
-# # in access.log.
-# #
-# # NOTE: proxy_auth requires a EXTERNAL authentication program
-# # to check username/password combinations (see
-# # auth_param directive).
-# #
-# # NOTE: proxy_auth can't be used in a transparent/intercepting proxy
-# # as the browser needs to be configured for using a proxy in order
-# # to respond to proxy authentication.
-#
-# acl aclname snmp_community string ...
-# # A community string to limit access to your SNMP Agent [fast]
-# # Example:
-# #
-# # acl snmppublic snmp_community public
-#
-# acl aclname maxconn number
-# # This will be matched when the client's IP address has
-# # more than <number> TCP connections established. [fast]
-# # NOTE: This only measures direct TCP links so X-Forwarded-For
-# # indirect clients are not counted.
-#
-# acl aclname max_user_ip [-s] number
-# # This will be matched when the user attempts to log in from more
-# # than <number> different ip addresses. The authenticate_ip_ttl
-# # parameter controls the timeout on the ip entries. [fast]
-# # If -s is specified the limit is strict, denying browsing
-# # from any further IP addresses until the ttl has expired. Without
-# # -s Squid will just annoy the user by "randomly" denying requests.
-# # (the counter is reset each time the limit is reached and a
-# # request is denied)
-# # NOTE: in acceleration mode or where there is mesh of child proxies,
-# # clients may appear to come from multiple addresses if they are
-# # going through proxy farms, so a limit of 1 may cause user problems.
-#
-# acl aclname random probability
-# # Pseudo-randomly match requests. Based on the probability given.
-# # Probability may be written as a decimal (0.333), fraction (1/3)
-# # or ratio of matches:non-matches (3:5).
-#
-# acl aclname req_mime_type [-i] mime-type ...
-# # regex match against the mime type of the request generated
-# # by the client. Can be used to detect file upload or some
-# # types HTTP tunneling requests [fast]
-# # NOTE: This does NOT match the reply. You cannot use this
-# # to match the returned file type.
-#
-# acl aclname req_header header-name [-i] any\.regex\.here
-# # regex match against any of the known request headers. May be
-# # thought of as a superset of "browser", "referer" and "mime-type"
-# # ACL [fast]
-#
-# acl aclname rep_mime_type [-i] mime-type ...
-# # regex match against the mime type of the reply received by
-# # squid. Can be used to detect file download or some
-# # types HTTP tunneling requests. [fast]
-# # NOTE: This has no effect in http_access rules. It only has
-# # effect in rules that affect the reply data stream such as
-# # http_reply_access.
-#
-# acl aclname rep_header header-name [-i] any\.regex\.here
-# # regex match against any of the known reply headers. May be
-# # thought of as a superset of "browser", "referer" and "mime-type"
-# # ACLs [fast]
-#
-# acl aclname external class_name [arguments...]
-# # external ACL lookup via a helper class defined by the
-# # external_acl_type directive [slow]
-#
-# acl aclname user_cert attribute values...
-# # match against attributes in a user SSL certificate
-# # attribute is one of DN/C/O/CN/L/ST or a numerical OID [fast]
-#
-# acl aclname ca_cert attribute values...
-# # match against attributes a users issuing CA SSL certificate
-# # attribute is one of DN/C/O/CN/L/ST or a numerical OID [fast]
-#
-# acl aclname ext_user username ...
-# acl aclname ext_user_regex [-i] pattern ...
-# # string match on username returned by external acl helper [slow]
-# # use REQUIRED to accept any non-null user name.
-#
-# acl aclname tag tagvalue ...
-# # string match on tag returned by external acl helper [fast]
-# # DEPRECATED. Only the first tag will match with this ACL.
-# # Use the 'note' ACL instead for handling multiple tag values.
-#
-# acl aclname hier_code codename ...
-# # string match against squid hierarchy code(s); [fast]
-# # e.g., DIRECT, PARENT_HIT, NONE, etc.
-# #
-# # NOTE: This has no effect in http_access rules. It only has
-# # effect in rules that affect the reply data stream such as
-# # http_reply_access.
-#
-# acl aclname note name [value ...]
-# # match transaction annotation [fast]
-# # Without values, matches any annotation with a given name.
-# # With value(s), matches any annotation with a given name that
-# # also has one of the given values.
-# # Names and values are compared using a string equality test.
-# # Annotation sources include note and adaptation_meta directives
-# # as well as helper and eCAP responses.
-#
-# acl aclname adaptation_service service ...
-# # Matches the name of any icap_service, ecap_service,
-# # adaptation_service_set, or adaptation_service_chain that Squid
-# # has used (or attempted to use) for the master transaction.
-# # This ACL must be defined after the corresponding adaptation
-# # service is named in squid.conf. This ACL is usable with
-# # adaptation_meta because it starts matching immediately after
-# # the service has been selected for adaptation.
-#
-# acl aclname any-of acl1 acl2 ...
-# # match any one of the acls [fast or slow]
-# # The first matching ACL stops further ACL evaluation.
-# #
-# # ACLs from multiple any-of lines with the same name are ORed.
-# # For example, A = (a1 or a2) or (a3 or a4) can be written as
-# # acl A any-of a1 a2
-# # acl A any-of a3 a4
-# #
-# # This group ACL is fast if all evaluated ACLs in the group are fast
-# # and slow otherwise.
-#
-# acl aclname all-of acl1 acl2 ...
-# # match all of the acls [fast or slow]
-# # The first mismatching ACL stops further ACL evaluation.
-# #
-# # ACLs from multiple all-of lines with the same name are ORed.
-# # For example, B = (b1 and b2) or (b3 and b4) can be written as
-# # acl B all-of b1 b2
-# # acl B all-of b3 b4
-# #
-# # This group ACL is fast if all evaluated ACLs in the group are fast
-# # and slow otherwise.
-#
-# Examples:
-# acl macaddress arp 09:00:2b:23:45:67
-# acl myexample dst_as 1241
-# acl password proxy_auth REQUIRED
-# acl fileupload req_mime_type -i ^multipart/form-data$
-# acl javascript rep_mime_type -i ^application/x-javascript$
-#
-#Default:
-# ACLs all, manager, localhost, and to_localhost are predefined.
-#
-#
-# Recommended minimum configuration:
-#
-
-# Example rule allowing access from your local networks.
-# Adapt to list your (internal) IP networks from where browsing
-# should be allowed
-acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
-#acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
-#acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
-#acl localnet src fc00::/7 # RFC 4193 local private network range
-#acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
-
-acl SSL_ports port 443
-acl Safe_ports port 80 # http
-acl Safe_ports port 21 # ftp
-acl Safe_ports port 443 # https
-acl Safe_ports port 70 # gopher
-acl Safe_ports port 210 # wais
-acl Safe_ports port 1025-65535 # unregistered ports
-acl Safe_ports port 280 # http-mgmt
-acl Safe_ports port 488 # gss-http
-acl Safe_ports port 591 # filemaker
-acl Safe_ports port 777 # multiling http
-acl CONNECT method CONNECT
-
-# TAG: proxy_protocol_access
-# Determine which client proxies can be trusted to provide correct
-# information regarding real client IP address using PROXY protocol.
-#
-# Requests may pass through a chain of several other proxies
-# before reaching us. The original source details may by sent in:
-# * HTTP message Forwarded header, or
-# * HTTP message X-Forwarded-For header, or
-# * PROXY protocol connection header.
-#
-# This directive is solely for validating new PROXY protocol
-# connections received from a port flagged with require-proxy-header.
-# It is checked only once after TCP connection setup.
-#
-# A deny match results in TCP connection closure.
-#
-# An allow match is required for Squid to permit the corresponding
-# TCP connection, before Squid even looks for HTTP request headers.
-# If there is an allow match, Squid starts using PROXY header information
-# to determine the source address of the connection for all future ACL
-# checks, logging, etc.
-#
-# SECURITY CONSIDERATIONS:
-#
-# Any host from which we accept client IP details can place
-# incorrect information in the relevant header, and Squid
-# will use the incorrect information as if it were the
-# source address of the request. This may enable remote
-# hosts to bypass any access control restrictions that are
-# based on the client's source addresses.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# all TCP connections to ports with require-proxy-header will be denied
-
-# TAG: follow_x_forwarded_for
-# Determine which client proxies can be trusted to provide correct
-# information regarding real client IP address.
-#
-# Requests may pass through a chain of several other proxies
-# before reaching us. The original source details may by sent in:
-# * HTTP message Forwarded header, or
-# * HTTP message X-Forwarded-For header, or
-# * PROXY protocol connection header.
-#
-# PROXY protocol connections are controlled by the proxy_protocol_access
-# directive which is checked before this.
-#
-# If a request reaches us from a source that is allowed by this
-# directive, then we trust the information it provides regarding
-# the IP of the client it received from (if any).
-#
-# For the purpose of ACLs used in this directive the src ACL type always
-# matches the address we are testing and srcdomain matches its rDNS.
-#
-# On each HTTP request Squid checks for X-Forwarded-For header fields.
-# If found the header values are iterated in reverse order and an allow
-# match is required for Squid to continue on to the next value.
-# The verification ends when a value receives a deny match, cannot be
-# tested, or there are no more values to test.
-# NOTE: Squid does not yet follow the Forwarded HTTP header.
-#
-# The end result of this process is an IP address that we will
-# refer to as the indirect client address. This address may
-# be treated as the client address for access control, ICAP, delay
-# pools and logging, depending on the acl_uses_indirect_client,
-# icap_uses_indirect_client, delay_pool_uses_indirect_client,
-# log_uses_indirect_client and tproxy_uses_indirect_client options.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-# SECURITY CONSIDERATIONS:
-#
-# Any host from which we accept client IP details can place
-# incorrect information in the relevant header, and Squid
-# will use the incorrect information as if it were the
-# source address of the request. This may enable remote
-# hosts to bypass any access control restrictions that are
-# based on the client's source addresses.
-#
-# For example:
-#
-# acl localhost src 127.0.0.1
-# acl my_other_proxy srcdomain .proxy.example.com
-# follow_x_forwarded_for allow localhost
-# follow_x_forwarded_for allow my_other_proxy
-#Default:
-# X-Forwarded-For header will be ignored.
-
-# TAG: acl_uses_indirect_client on|off
-# Controls whether the indirect client address
-# (see follow_x_forwarded_for) is used instead of the
-# direct client address in acl matching.
-#
-# NOTE: maxconn ACL considers direct TCP links and indirect
-# clients will always have zero. So no match.
-#Default:
-# acl_uses_indirect_client on
-
-# TAG: delay_pool_uses_indirect_client on|off
-# Controls whether the indirect client address
-# (see follow_x_forwarded_for) is used instead of the
-# direct client address in delay pools.
-#Default:
-# delay_pool_uses_indirect_client on
-
-# TAG: log_uses_indirect_client on|off
-# Controls whether the indirect client address
-# (see follow_x_forwarded_for) is used instead of the
-# direct client address in the access log.
-#Default:
-# log_uses_indirect_client on
-
-# TAG: tproxy_uses_indirect_client on|off
-# Controls whether the indirect client address
-# (see follow_x_forwarded_for) is used instead of the
-# direct client address when spoofing the outgoing client.
-#
-# This has no effect on requests arriving in non-tproxy
-# mode ports.
-#
-# SECURITY WARNING: Usage of this option is dangerous
-# and should not be used trivially. Correct configuration
-# of follow_x_forwarded_for with a limited set of trusted
-# sources is required to prevent abuse of your proxy.
-#Default:
-# tproxy_uses_indirect_client off
-
-# TAG: spoof_client_ip
-# Control client IP address spoofing of TPROXY traffic based on
-# defined access lists.
-#
-# spoof_client_ip allow|deny [!]aclname ...
-#
-# If there are no "spoof_client_ip" lines present, the default
-# is to "allow" spoofing of any suitable request.
-#
-# Note that the cache_peer "no-tproxy" option overrides this ACL.
-#
-# This clause supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# Allow spoofing on all TPROXY traffic.
-
-# TAG: http_access
-# Allowing or Denying access based on defined access lists
-#
-# To allow or deny a message received on an HTTP, HTTPS, or FTP port:
-# http_access allow|deny [!]aclname ...
-#
-# NOTE on default values:
-#
-# If there are no "access" lines present, the default is to deny
-# the request.
-#
-# If none of the "access" lines cause a match, the default is the
-# opposite of the last line in the list. If the last line was
-# deny, the default is allow. Conversely, if the last line
-# is allow, the default will be deny. For these reasons, it is a
-# good idea to have an "deny all" entry at the end of your access
-# lists to avoid potential confusion.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-#Default:
-# Deny, unless rules exist in squid.conf.
-#
-
-#
-# Recommended minimum Access Permission configuration:
-#
-# Deny requests to certain unsafe ports
-http_access deny !Safe_ports
-
-# Deny CONNECT to other than secure SSL ports
-http_access deny CONNECT !SSL_ports
-
-# Only allow cachemgr access from localhost
-http_access allow localhost manager
-http_access deny manager
-
-# We strongly recommend the following be uncommented to protect innocent
-# web applications running on the proxy server who think the only
-# one who can access services on "localhost" is a local user
-#http_access deny to_localhost
-
-#
-# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
-#
-
-# Example rule allowing access from your local networks.
-# Adapt localnet in the ACL section to list your (internal) IP networks
-# from where browsing should be allowed
-http_access allow localnet
-http_access allow localhost
-
-# And finally deny all other access to this proxy
-http_access deny all
-
-# TAG: adapted_http_access
-# Allowing or Denying access based on defined access lists
-#
-# Essentially identical to http_access, but runs after redirectors
-# and ICAP/eCAP adaptation. Allowing access control based on their
-# output.
-#
-# If not set then only http_access is used.
-#Default:
-# Allow, unless rules exist in squid.conf.
-
-# TAG: http_reply_access
-# Allow replies to client requests. This is complementary to http_access.
-#
-# http_reply_access allow|deny [!] aclname ...
-#
-# NOTE: if there are no access lines present, the default is to allow
-# all replies.
-#
-# If none of the access lines cause a match the opposite of the
-# last line will apply. Thus it is good practice to end the rules
-# with an "allow all" or "deny all" entry.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# Allow, unless rules exist in squid.conf.
-
-# TAG: icp_access
-# Allowing or Denying access to the ICP port based on defined
-# access lists
-#
-# icp_access allow|deny [!]aclname ...
-#
-# NOTE: The default if no icp_access lines are present is to
-# deny all traffic. This default may cause problems with peers
-# using ICP.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-## Allow ICP queries from local networks only
-##icp_access allow localnet
-##icp_access deny all
-#Default:
-# Deny, unless rules exist in squid.conf.
-
-# TAG: htcp_access
-# Allowing or Denying access to the HTCP port based on defined
-# access lists
-#
-# htcp_access allow|deny [!]aclname ...
-#
-# See also htcp_clr_access for details on access control for
-# cache purge (CLR) HTCP messages.
-#
-# NOTE: The default if no htcp_access lines are present is to
-# deny all traffic. This default may cause problems with peers
-# using the htcp option.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-## Allow HTCP queries from local networks only
-##htcp_access allow localnet
-##htcp_access deny all
-#Default:
-# Deny, unless rules exist in squid.conf.
-
-# TAG: htcp_clr_access
-# Allowing or Denying access to purge content using HTCP based
-# on defined access lists.
-# See htcp_access for details on general HTCP access control.
-#
-# htcp_clr_access allow|deny [!]aclname ...
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-## Allow HTCP CLR requests from trusted peers
-#acl htcp_clr_peer src 192.0.2.2 2001:DB8::2
-#htcp_clr_access allow htcp_clr_peer
-#htcp_clr_access deny all
-#Default:
-# Deny, unless rules exist in squid.conf.
-
-# TAG: miss_access
-# Determines whether network access is permitted when satisfying a request.
-#
-# For example;
-# to force your neighbors to use you as a sibling instead of
-# a parent.
-#
-# acl localclients src 192.0.2.0/24 2001:DB8::a:0/64
-# miss_access deny !localclients
-# miss_access allow all
-#
-# This means only your local clients are allowed to fetch relayed/MISS
-# replies from the network and all other clients can only fetch cached
-# objects (HITs).
-#
-# The default for this setting allows all clients who passed the
-# http_access rules to relay via this proxy.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# Allow, unless rules exist in squid.conf.
-
-# TAG: ident_lookup_access
-# A list of ACL elements which, if matched, cause an ident
-# (RFC 931) lookup to be performed for this request. For
-# example, you might choose to always perform ident lookups
-# for your main multi-user Unix boxes, but not for your Macs
-# and PCs. By default, ident lookups are not performed for
-# any requests.
-#
-# To enable ident lookups for specific client addresses, you
-# can follow this example:
-#
-# acl ident_aware_hosts src 198.168.1.0/24
-# ident_lookup_access allow ident_aware_hosts
-# ident_lookup_access deny all
-#
-# Only src type ACL checks are fully supported. A srcdomain
-# ACL might work at times, but it will not always provide
-# the correct result.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# Unless rules exist in squid.conf, IDENT is not fetched.
-
-# TAG: reply_body_max_size size [acl acl...]
-# This option specifies the maximum size of a reply body. It can be
-# used to prevent users from downloading very large files, such as
-# MP3's and movies. When the reply headers are received, the
-# reply_body_max_size lines are processed, and the first line where
-# all (if any) listed ACLs are true is used as the maximum body size
-# for this reply.
-#
-# This size is checked twice. First when we get the reply headers,
-# we check the content-length value. If the content length value exists
-# and is larger than the allowed size, the request is denied and the
-# user receives an error message that says "the request or reply
-# is too large." If there is no content-length, and the reply
-# size exceeds this limit, the client's connection is just closed
-# and they will receive a partial reply.
-#
-# WARNING: downstream caches probably can not detect a partial reply
-# if there is no content-length header, so they will cache
-# partial responses and give them out as hits. You should NOT
-# use this option if you have downstream caches.
-#
-# WARNING: A maximum size smaller than the size of squid's error messages
-# will cause an infinite loop and crash squid. Ensure that the smallest
-# non-zero value you use is greater that the maximum header size plus
-# the size of your largest error page.
-#
-# If you set this parameter none (the default), there will be
-# no limit imposed.
-#
-# Configuration Format is:
-# reply_body_max_size SIZE UNITS [acl ...]
-# ie.
-# reply_body_max_size 10 MB
-#
-#Default:
-# No limit is applied.
-
-# NETWORK OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: http_port
-# Usage: port [mode] [options]
-# hostname:port [mode] [options]
-# 1.2.3.4:port [mode] [options]
-#
-# The socket addresses where Squid will listen for HTTP client
-# requests. You may specify multiple socket addresses.
-# There are three forms: port alone, hostname with port, and
-# IP address with port. If you specify a hostname or IP
-# address, Squid binds the socket to that specific
-# address. Most likely, you do not need to bind to a specific
-# address, so you can use the port number alone.
-#
-# If you are running Squid in accelerator mode, you
-# probably want to listen on port 80 also, or instead.
-#
-# The -a command line option may be used to specify additional
-# port(s) where Squid listens for proxy request. Such ports will
-# be plain proxy ports with no options.
-#
-# You may specify multiple socket addresses on multiple lines.
-#
-# Modes:
-#
-# intercept Support for IP-Layer NAT interception delivering
-# traffic to this Squid port.
-# NP: disables authentication on the port.
-#
-# tproxy Support Linux TPROXY (or BSD divert-to) with spoofing
-# of outgoing connections using the client IP address.
-# NP: disables authentication on the port.
-#
-# accel Accelerator / reverse proxy mode
-#
-# ssl-bump For each CONNECT request allowed by ssl_bump ACLs,
-# establish secure connection with the client and with
-# the server, decrypt HTTPS messages as they pass through
-# Squid, and treat them as unencrypted HTTP messages,
-# becoming the man-in-the-middle.
-#
-# The ssl_bump option is required to fully enable
-# bumping of CONNECT requests.
-#
-# Omitting the mode flag causes default forward proxy mode to be used.
-#
-#
-# Accelerator Mode Options:
-#
-# defaultsite=domainname
-# What to use for the Host: header if it is not present
-# in a request. Determines what site (not origin server)
-# accelerators should consider the default.
-#
-# no-vhost Disable using HTTP/1.1 Host header for virtual domain support.
-#
-# protocol= Protocol to reconstruct accelerated and intercepted
-# requests with. Defaults to HTTP/1.1 for http_port and
-# HTTPS/1.1 for https_port.
-# When an unsupported value is configured Squid will
-# produce a FATAL error.
-# Values: HTTP or HTTP/1.1, HTTPS or HTTPS/1.1
-#
-# vport Virtual host port support. Using the http_port number
-# instead of the port passed on Host: headers.
-#
-# vport=NN Virtual host port support. Using the specified port
-# number instead of the port passed on Host: headers.
-#
-# act-as-origin
-# Act as if this Squid is the origin server.
-# This currently means generate new Date: and Expires:
-# headers on HIT instead of adding Age:.
-#
-# ignore-cc Ignore request Cache-Control headers.
-#
-# WARNING: This option violates HTTP specifications if
-# used in non-accelerator setups.
-#
-# allow-direct Allow direct forwarding in accelerator mode. Normally
-# accelerated requests are denied direct forwarding as if
-# never_direct was used.
-#
-# WARNING: this option opens accelerator mode to security
-# vulnerabilities usually only affecting in interception
-# mode. Make sure to protect forwarding with suitable
-# http_access rules when using this.
-#
-#
-# SSL Bump Mode Options:
-# In addition to these options ssl-bump requires TLS/SSL options.
-#
-# generate-host-certificates[=<on|off>]
-# Dynamically create SSL server certificates for the
-# destination hosts of bumped CONNECT requests.When
-# enabled, the cert and key options are used to sign
-# generated certificates. Otherwise generated
-# certificate will be selfsigned.
-# If there is a CA certificate lifetime of the generated
-# certificate equals lifetime of the CA certificate. If
-# generated certificate is selfsigned lifetime is three
-# years.
-# This option is enabled by default when ssl-bump is used.
-# See the ssl-bump option above for more information.
-#
-# dynamic_cert_mem_cache_size=SIZE
-# Approximate total RAM size spent on cached generated
-# certificates. If set to zero, caching is disabled. The
-# default value is 4MB.
-#
-# TLS / SSL Options:
-#
-# cert= Path to SSL certificate (PEM format).
-#
-# key= Path to SSL private key file (PEM format)
-# if not specified, the certificate file is
-# assumed to be a combined certificate and
-# key file.
-#
-# version= The version of SSL/TLS supported
-# 1 automatic (default)
-# 2 SSLv2 only
-# 3 SSLv3 only
-# 4 TLSv1.0 only
-# 5 TLSv1.1 only
-# 6 TLSv1.2 only
-#
-# cipher= Colon separated list of supported ciphers.
-# NOTE: some ciphers such as EDH ciphers depend on
-# additional settings. If those settings are
-# omitted the ciphers may be silently ignored
-# by the OpenSSL library.
-#
-# options= Various SSL implementation options. The most important
-# being:
-# NO_SSLv2 Disallow the use of SSLv2
-# NO_SSLv3 Disallow the use of SSLv3
-# NO_TLSv1 Disallow the use of TLSv1.0
-# NO_TLSv1_1 Disallow the use of TLSv1.1
-# NO_TLSv1_2 Disallow the use of TLSv1.2
-# SINGLE_DH_USE Always create a new key when using
-# temporary/ephemeral DH key exchanges
-# NO_TICKET Disables TLS tickets extension
-#
-# SINGLE_ECDH_USE
-# Enable ephemeral ECDH key exchange.
-# The adopted curve should be specified
-# using the tls-dh option.
-#
-# ALL Enable various bug workarounds
-# suggested as "harmless" by OpenSSL
-# Be warned that this reduces SSL/TLS
-# strength to some attacks.
-# See OpenSSL SSL_CTX_set_options documentation for a
-# complete list of options.
-#
-# clientca= File containing the list of CAs to use when
-# requesting a client certificate.
-#
-# cafile= File containing additional CA certificates to
-# use when verifying client certificates. If unset
-# clientca will be used.
-#
-# capath= Directory containing additional CA certificates
-# and CRL lists to use when verifying client certificates.
-#
-# crlfile= File of additional CRL lists to use when verifying
-# the client certificate, in addition to CRLs stored in
-# the capath. Implies VERIFY_CRL flag below.
-#
-# tls-dh=[curve:]file
-# File containing DH parameters for temporary/ephemeral DH key
-# exchanges, optionally prefixed by a curve for ephemeral ECDH
-# key exchanges.
-# See OpenSSL documentation for details on how to create the
-# DH parameter file. Supported curves for ECDH can be listed
-# using the "openssl ecparam -list_curves" command.
-# WARNING: EDH and EECDH ciphers will be silently disabled if
-# this option is not set.
-#
-# sslflags= Various flags modifying the use of SSL:
-# DELAYED_AUTH
-# Don't request client certificates
-# immediately, but wait until acl processing
-# requires a certificate (not yet implemented).
-# NO_DEFAULT_CA
-# Don't use the default CA lists built in
-# to OpenSSL.
-# NO_SESSION_REUSE
-# Don't allow for session reuse. Each connection
-# will result in a new SSL session.
-# VERIFY_CRL
-# Verify CRL lists when accepting client
-# certificates.
-# VERIFY_CRL_ALL
-# Verify CRL lists for all certificates in the
-# client certificate chain.
-#
-# sslcontext= SSL session ID context identifier.
-#
-# Other Options:
-#
-# connection-auth[=on|off]
-# use connection-auth=off to tell Squid to prevent
-# forwarding Microsoft connection oriented authentication
-# (NTLM, Negotiate and Kerberos)
-#
-# disable-pmtu-discovery=
-# Control Path-MTU discovery usage:
-# off lets OS decide on what to do (default).
-# transparent disable PMTU discovery when transparent
-# support is enabled.
-# always disable always PMTU discovery.
-#
-# In many setups of transparently intercepting proxies
-# Path-MTU discovery can not work on traffic towards the
-# clients. This is the case when the intercepting device
-# does not fully track connections and fails to forward
-# ICMP must fragment messages to the cache server. If you
-# have such setup and experience that certain clients
-# sporadically hang or never complete requests set
-# disable-pmtu-discovery option to 'transparent'.
-#
-# name= Specifies a internal name for the port. Defaults to
-# the port specification (port or addr:port)
-#
-# tcpkeepalive[=idle,interval,timeout]
-# Enable TCP keepalive probes of idle connections.
-# In seconds; idle is the initial time before TCP starts
-# probing the connection, interval how often to probe, and
-# timeout the time before giving up.
-#
-# require-proxy-header
-# Require PROXY protocol version 1 or 2 connections.
-# The proxy_protocol_access is required to whitelist
-# downstream proxies which can be trusted.
-#
-# If you run Squid on a dual-homed machine with an internal
-# and an external interface we recommend you to specify the
-# internal address:port in http_port. This way Squid will only be
-# visible on the internal address.
-#
-#
-
-# Squid normally listens to port 3128
-http_port 3128
-
-# TAG: https_port
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Usage: [ip:]port cert=certificate.pem [key=key.pem] [mode] [options...]
-#
-# The socket address where Squid will listen for client requests made
-# over TLS or SSL connections. Commonly referred to as HTTPS.
-#
-# This is most useful for situations where you are running squid in
-# accelerator mode and you want to do the SSL work at the accelerator level.
-#
-# You may specify multiple socket addresses on multiple lines,
-# each with their own SSL certificate and/or options.
-#
-# Modes:
-#
-# accel Accelerator / reverse proxy mode
-#
-# intercept Support for IP-Layer interception of
-# outgoing requests without browser settings.
-# NP: disables authentication and IPv6 on the port.
-#
-# tproxy Support Linux TPROXY for spoofing outgoing
-# connections using the client IP address.
-# NP: disables authentication and maybe IPv6 on the port.
-#
-# ssl-bump For each intercepted connection allowed by ssl_bump
-# ACLs, establish a secure connection with the client and with
-# the server, decrypt HTTPS messages as they pass through
-# Squid, and treat them as unencrypted HTTP messages,
-# becoming the man-in-the-middle.
-#
-# An "ssl_bump server-first" match is required to
-# fully enable bumping of intercepted SSL connections.
-#
-# Requires tproxy or intercept.
-#
-# Omitting the mode flag causes default forward proxy mode to be used.
-#
-#
-# See http_port for a list of generic options
-#
-#
-# SSL Options:
-#
-# cert= Path to SSL certificate (PEM format).
-#
-# key= Path to SSL private key file (PEM format)
-# if not specified, the certificate file is
-# assumed to be a combined certificate and
-# key file.
-#
-# version= The version of SSL/TLS supported
-# 1 automatic (default)
-# 2 SSLv2 only
-# 3 SSLv3 only
-# 4 TLSv1 only
-#
-# cipher= Colon separated list of supported ciphers.
-#
-# options= Various SSL engine options. The most important
-# being:
-# NO_SSLv2 Disallow the use of SSLv2
-# NO_SSLv3 Disallow the use of SSLv3
-# NO_TLSv1 Disallow the use of TLSv1
-#
-# SINGLE_DH_USE Always create a new key when using
-# temporary/ephemeral DH key exchanges
-#
-# SINGLE_ECDH_USE
-# Enable ephemeral ECDH key exchange.
-# The adopted curve should be specified
-# using the tls-dh option.
-#
-# See src/ssl_support.c or OpenSSL SSL_CTX_set_options
-# documentation for a complete list of options.
-#
-# clientca= File containing the list of CAs to use when
-# requesting a client certificate.
-#
-# cafile= File containing additional CA certificates to
-# use when verifying client certificates. If unset
-# clientca will be used.
-#
-# capath= Directory containing additional CA certificates
-# and CRL lists to use when verifying client certificates.
-#
-# crlfile= File of additional CRL lists to use when verifying
-# the client certificate, in addition to CRLs stored in
-# the capath. Implies VERIFY_CRL flag below.
-#
-# tls-dh=[curve:]file
-# File containing DH parameters for temporary/ephemeral DH key
-# exchanges, optionally prefixed by a curve for ephemeral ECDH
-# key exchanges.
-#
-# sslflags= Various flags modifying the use of SSL:
-# DELAYED_AUTH
-# Don't request client certificates
-# immediately, but wait until acl processing
-# requires a certificate (not yet implemented).
-# NO_DEFAULT_CA
-# Don't use the default CA lists built in
-# to OpenSSL.
-# NO_SESSION_REUSE
-# Don't allow for session reuse. Each connection
-# will result in a new SSL session.
-# VERIFY_CRL
-# Verify CRL lists when accepting client
-# certificates.
-# VERIFY_CRL_ALL
-# Verify CRL lists for all certificates in the
-# client certificate chain.
-#
-# sslcontext= SSL session ID context identifier.
-#
-# generate-host-certificates[=<on|off>]
-# Dynamically create SSL server certificates for the
-# destination hosts of bumped SSL requests.When
-# enabled, the cert and key options are used to sign
-# generated certificates. Otherwise generated
-# certificate will be selfsigned.
-# If there is CA certificate life time of generated
-# certificate equals lifetime of CA certificate. If
-# generated certificate is selfsigned lifetime is three
-# years.
-# This option is enabled by default when SslBump is used.
-# See the sslBump option above for more information.
-#
-# dynamic_cert_mem_cache_size=SIZE
-# Approximate total RAM size spent on cached generated
-# certificates. If set to zero, caching is disabled. The
-# default value is 4MB.
-#
-# See http_port for a list of available options.
-#Default:
-# none
-
-# TAG: ftp_port
-# Enables Native FTP proxy by specifying the socket address where Squid
-# listens for FTP client requests. See http_port directive for various
-# ways to specify the listening address and mode.
-#
-# Usage: ftp_port address [mode] [options]
-#
-# WARNING: This is a new, experimental, complex feature that has seen
-# limited production exposure. Some Squid modules (e.g., caching) do not
-# currently work with native FTP proxying, and many features have not
-# even been tested for compatibility. Test well before deploying!
-#
-# Native FTP proxying differs substantially from proxying HTTP requests
-# with ftp:// URIs because Squid works as an FTP server and receives
-# actual FTP commands (rather than HTTP requests with FTP URLs).
-#
-# Native FTP commands accepted at ftp_port are internally converted or
-# wrapped into HTTP-like messages. The same happens to Native FTP
-# responses received from FTP origin servers. Those HTTP-like messages
-# are shoveled through regular access control and adaptation layers
-# between the FTP client and the FTP origin server. This allows Squid to
-# examine, adapt, block, and log FTP exchanges. Squid reuses most HTTP
-# mechanisms when shoveling wrapped FTP messages. For example,
-# http_access and adaptation_access directives are used.
-#
-# Modes:
-#
-# intercept Same as http_port intercept. The FTP origin address is
-# determined based on the intended destination of the
-# intercepted connection.
-#
-# tproxy Support Linux TPROXY for spoofing outgoing
-# connections using the client IP address.
-# NP: disables authentication and maybe IPv6 on the port.
-#
-# By default (i.e., without an explicit mode option), Squid extracts the
-# FTP origin address from the login@origin parameter of the FTP USER
-# command. Many popular FTP clients support such native FTP proxying.
-#
-# Options:
-#
-# name=token Specifies an internal name for the port. Defaults to
-# the port address. Usable with myportname ACL.
-#
-# ftp-track-dirs
-# Enables tracking of FTP directories by injecting extra
-# PWD commands and adjusting Request-URI (in wrapping
-# HTTP requests) to reflect the current FTP server
-# directory. Tracking is disabled by default.
-#
-# protocol=FTP Protocol to reconstruct accelerated and intercepted
-# requests with. Defaults to FTP. No other accepted
-# values have been tested with. An unsupported value
-# results in a FATAL error. Accepted values are FTP,
-# HTTP (or HTTP/1.1), and HTTPS (or HTTPS/1.1).
-#
-# Other http_port modes and options that are not specific to HTTP and
-# HTTPS may also work.
-#Default:
-# none
-
-# TAG: tcp_outgoing_tos
-# Allows you to select a TOS/Diffserv value for packets outgoing
-# on the server side, based on an ACL.
-#
-# tcp_outgoing_tos ds-field [!]aclname ...
-#
-# Example where normal_service_net uses the TOS value 0x00
-# and good_service_net uses 0x20
-#
-# acl normal_service_net src 10.0.0.0/24
-# acl good_service_net src 10.0.1.0/24
-# tcp_outgoing_tos 0x00 normal_service_net
-# tcp_outgoing_tos 0x20 good_service_net
-#
-# TOS/DSCP values really only have local significance - so you should
-# know what you're specifying. For more information, see RFC2474,
-# RFC2475, and RFC3260.
-#
-# The TOS/DSCP byte must be exactly that - a octet value 0 - 255, or
-# "default" to use whatever default your host has.
-# Note that only multiples of 4 are usable as the two rightmost bits have
-# been redefined for use by ECN (RFC 3168 section 23.1).
-# The squid parser will enforce this by masking away the ECN bits.
-#
-# Processing proceeds in the order specified, and stops at first fully
-# matching line.
-#
-# Only fast ACLs are supported.
-#Default:
-# none
-
-# TAG: clientside_tos
-# Allows you to select a TOS/DSCP value for packets being transmitted
-# on the client-side, based on an ACL.
-#
-# clientside_tos ds-field [!]aclname ...
-#
-# Example where normal_service_net uses the TOS value 0x00
-# and good_service_net uses 0x20
-#
-# acl normal_service_net src 10.0.0.0/24
-# acl good_service_net src 10.0.1.0/24
-# clientside_tos 0x00 normal_service_net
-# clientside_tos 0x20 good_service_net
-#
-# Note: This feature is incompatible with qos_flows. Any TOS values set here
-# will be overwritten by TOS values in qos_flows.
-#
-# The TOS/DSCP byte must be exactly that - a octet value 0 - 255, or
-# "default" to use whatever default your host has.
-# Note that only multiples of 4 are usable as the two rightmost bits have
-# been redefined for use by ECN (RFC 3168 section 23.1).
-# The squid parser will enforce this by masking away the ECN bits.
-#
-#Default:
-# none
-
-# TAG: tcp_outgoing_mark
-# Note: This option is only available if Squid is rebuilt with the
-# Packet MARK (Linux)
-#
-# Allows you to apply a Netfilter mark value to outgoing packets
-# on the server side, based on an ACL.
-#
-# tcp_outgoing_mark mark-value [!]aclname ...
-#
-# Example where normal_service_net uses the mark value 0x00
-# and good_service_net uses 0x20
-#
-# acl normal_service_net src 10.0.0.0/24
-# acl good_service_net src 10.0.1.0/24
-# tcp_outgoing_mark 0x00 normal_service_net
-# tcp_outgoing_mark 0x20 good_service_net
-#
-# Only fast ACLs are supported.
-#Default:
-# none
-
-# TAG: clientside_mark
-# Note: This option is only available if Squid is rebuilt with the
-# Packet MARK (Linux)
-#
-# Allows you to apply a Netfilter mark value to packets being transmitted
-# on the client-side, based on an ACL.
-#
-# clientside_mark mark-value [!]aclname ...
-#
-# Example where normal_service_net uses the mark value 0x00
-# and good_service_net uses 0x20
-#
-# acl normal_service_net src 10.0.0.0/24
-# acl good_service_net src 10.0.1.0/24
-# clientside_mark 0x00 normal_service_net
-# clientside_mark 0x20 good_service_net
-#
-# Note: This feature is incompatible with qos_flows. Any mark values set here
-# will be overwritten by mark values in qos_flows.
-#Default:
-# none
-
-# TAG: qos_flows
-# Allows you to select a TOS/DSCP value to mark outgoing
-# connections to the client, based on where the reply was sourced.
-# For platforms using netfilter, allows you to set a netfilter mark
-# value instead of, or in addition to, a TOS value.
-#
-# By default this functionality is disabled. To enable it with the default
-# settings simply use "qos_flows mark" or "qos_flows tos". Default
-# settings will result in the netfilter mark or TOS value being copied
-# from the upstream connection to the client. Note that it is the connection
-# CONNMARK value not the packet MARK value that is copied.
-#
-# It is not currently possible to copy the mark or TOS value from the
-# client to the upstream connection request.
-#
-# TOS values really only have local significance - so you should
-# know what you're specifying. For more information, see RFC2474,
-# RFC2475, and RFC3260.
-#
-# The TOS/DSCP byte must be exactly that - a octet value 0 - 255.
-# Note that only multiples of 4 are usable as the two rightmost bits have
-# been redefined for use by ECN (RFC 3168 section 23.1).
-# The squid parser will enforce this by masking away the ECN bits.
-#
-# Mark values can be any unsigned 32-bit integer value.
-#
-# This setting is configured by setting the following values:
-#
-# tos|mark Whether to set TOS or netfilter mark values
-#
-# local-hit=0xFF Value to mark local cache hits.
-#
-# sibling-hit=0xFF Value to mark hits from sibling peers.
-#
-# parent-hit=0xFF Value to mark hits from parent peers.
-#
-# miss=0xFF[/mask] Value to mark cache misses. Takes precedence
-# over the preserve-miss feature (see below), unless
-# mask is specified, in which case only the bits
-# specified in the mask are written.
-#
-# The TOS variant of the following features are only possible on Linux
-# and require your kernel to be patched with the TOS preserving ZPH
-# patch, available from http://zph.bratcheda.org
-# No patch is needed to preserve the netfilter mark, which will work
-# with all variants of netfilter.
-#
-# disable-preserve-miss
-# This option disables the preservation of the TOS or netfilter
-# mark. By default, the existing TOS or netfilter mark value of
-# the response coming from the remote server will be retained
-# and masked with miss-mark.
-# NOTE: in the case of a netfilter mark, the mark must be set on
-# the connection (using the CONNMARK target) not on the packet
-# (MARK target).
-#
-# miss-mask=0xFF
-# Allows you to mask certain bits in the TOS or mark value
-# received from the remote server, before copying the value to
-# the TOS sent towards clients.
-# Default for tos: 0xFF (TOS from server is not changed).
-# Default for mark: 0xFFFFFFFF (mark from server is not changed).
-#
-# All of these features require the --enable-zph-qos compilation flag
-# (enabled by default). Netfilter marking also requires the
-# libnetfilter_conntrack libraries (--with-netfilter-conntrack) and
-# libcap 2.09+ (--with-libcap).
-#
-#Default:
-# none
-
-# TAG: tcp_outgoing_address
-# Allows you to map requests to different outgoing IP addresses
-# based on the username or source address of the user making
-# the request.
-#
-# tcp_outgoing_address ipaddr [[!]aclname] ...
-#
-# For example;
-# Forwarding clients with dedicated IPs for certain subnets.
-#
-# acl normal_service_net src 10.0.0.0/24
-# acl good_service_net src 10.0.2.0/24
-#
-# tcp_outgoing_address 2001:db8::c001 good_service_net
-# tcp_outgoing_address 10.1.0.2 good_service_net
-#
-# tcp_outgoing_address 2001:db8::beef normal_service_net
-# tcp_outgoing_address 10.1.0.1 normal_service_net
-#
-# tcp_outgoing_address 2001:db8::1
-# tcp_outgoing_address 10.1.0.3
-#
-# Processing proceeds in the order specified, and stops at first fully
-# matching line.
-#
-# Squid will add an implicit IP version test to each line.
-# Requests going to IPv4 websites will use the outgoing 10.1.0.* addresses.
-# Requests going to IPv6 websites will use the outgoing 2001:db8:* addresses.
-#
-#
-# NOTE: The use of this directive using client dependent ACLs is
-# incompatible with the use of server side persistent connections. To
-# ensure correct results it is best to set server_persistent_connections
-# to off when using this directive in such configurations.
-#
-# NOTE: The use of this directive to set a local IP on outgoing TCP links
-# is incompatible with using TPROXY to set client IP out outbound TCP links.
-# When needing to contact peers use the no-tproxy cache_peer option and the
-# client_dst_passthru directive re-enable normal forwarding such as this.
-#
-#Default:
-# Address selection is performed by the operating system.
-
-# TAG: host_verify_strict
-# Regardless of this option setting, when dealing with intercepted
-# traffic, Squid always verifies that the destination IP address matches
-# the Host header domain or IP (called 'authority form URL').
-#
-# This enforcement is performed to satisfy a MUST-level requirement in
-# RFC 2616 section 14.23: "The Host field value MUST represent the naming
-# authority of the origin server or gateway given by the original URL".
-#
-# When set to ON:
-# Squid always responds with an HTTP 409 (Conflict) error
-# page and logs a security warning if there is no match.
-#
-# Squid verifies that the destination IP address matches
-# the Host header for forward-proxy and reverse-proxy traffic
-# as well. For those traffic types, Squid also enables the
-# following checks, comparing the corresponding Host header
-# and Request-URI components:
-#
-# * The host names (domain or IP) must be identical,
-# but valueless or missing Host header disables all checks.
-# For the two host names to match, both must be either IP
-# or FQDN.
-#
-# * Port numbers must be identical, but if a port is missing
-# the scheme-default port is assumed.
-#
-#
-# When set to OFF (the default):
-# Squid allows suspicious requests to continue but logs a
-# security warning and blocks caching of the response.
-#
-# * Forward-proxy traffic is not checked at all.
-#
-# * Reverse-proxy traffic is not checked at all.
-#
-# * Intercepted traffic which passes verification is handled
-# according to client_dst_passthru.
-#
-# * Intercepted requests which fail verification are sent
-# to the client original destination instead of DIRECT.
-# This overrides 'client_dst_passthru off'.
-#
-# For now suspicious intercepted CONNECT requests are always
-# responded to with an HTTP 409 (Conflict) error page.
-#
-#
-# SECURITY NOTE:
-#
-# As described in CVE-2009-0801 when the Host: header alone is used
-# to determine the destination of a request it becomes trivial for
-# malicious scripts on remote websites to bypass browser same-origin
-# security policy and sandboxing protections.
-#
-# The cause of this is that such applets are allowed to perform their
-# own HTTP stack, in which case the same-origin policy of the browser
-# sandbox only verifies that the applet tries to contact the same IP
-# as from where it was loaded at the IP level. The Host: header may
-# be different from the connected IP and approved origin.
-#
-#Default:
-# host_verify_strict off
-
-# TAG: client_dst_passthru
-# With NAT or TPROXY intercepted traffic Squid may pass the request
-# directly to the original client destination IP or seek a faster
-# source using the HTTP Host header.
-#
-# Using Host to locate alternative servers can provide faster
-# connectivity with a range of failure recovery options.
-# But can also lead to connectivity trouble when the client and
-# server are attempting stateful interactions unaware of the proxy.
-#
-# This option (on by default) prevents alternative DNS entries being
-# located to send intercepted traffic DIRECT to an origin server.
-# The clients original destination IP and port will be used instead.
-#
-# Regardless of this option setting, when dealing with intercepted
-# traffic Squid will verify the Host: header and any traffic which
-# fails Host verification will be treated as if this option were ON.
-#
-# see host_verify_strict for details on the verification process.
-#Default:
-# client_dst_passthru on
-
-# SSL OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: ssl_unclean_shutdown
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Some browsers (especially MSIE) bugs out on SSL shutdown
-# messages.
-#Default:
-# ssl_unclean_shutdown off
-
-# TAG: ssl_engine
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# The OpenSSL engine to use. You will need to set this if you
-# would like to use hardware SSL acceleration for example.
-#Default:
-# none
-
-# TAG: sslproxy_client_certificate
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Client SSL Certificate to use when proxying https:// URLs
-#Default:
-# none
-
-# TAG: sslproxy_client_key
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Client SSL Key to use when proxying https:// URLs
-#Default:
-# none
-
-# TAG: sslproxy_version
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# SSL version level to use when proxying https:// URLs
-#
-# The versions of SSL/TLS supported:
-#
-# 1 automatic (default)
-# 2 SSLv2 only
-# 3 SSLv3 only
-# 4 TLSv1.0 only
-# 5 TLSv1.1 only
-# 6 TLSv1.2 only
-#Default:
-# automatic SSL/TLS version negotiation
-
-# TAG: sslproxy_options
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Colon (:) or comma (,) separated list of SSL implementation options
-# to use when proxying https:// URLs
-#
-# The most important being:
-#
-# NO_SSLv2 Disallow the use of SSLv2
-# NO_SSLv3 Disallow the use of SSLv3
-# NO_TLSv1 Disallow the use of TLSv1.0
-# NO_TLSv1_1 Disallow the use of TLSv1.1
-# NO_TLSv1_2 Disallow the use of TLSv1.2
-#
-# SINGLE_DH_USE
-# Always create a new key when using temporary/ephemeral
-# DH key exchanges
-#
-# NO_TICKET
-# Disable use of RFC5077 session tickets. Some servers
-# may have problems understanding the TLS extension due
-# to ambiguous specification in RFC4507.
-#
-# ALL Enable various bug workarounds suggested as "harmless"
-# by OpenSSL. Be warned that this may reduce SSL/TLS
-# strength to some attacks.
-#
-# See the OpenSSL SSL_CTX_set_options documentation for a
-# complete list of possible options.
-#
-# WARNING: This directive takes a single token. If a space is used
-# the value(s) after that space are SILENTLY IGNORED.
-#Default:
-# none
-
-# TAG: sslproxy_cipher
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# SSL cipher list to use when proxying https:// URLs
-#
-# Colon separated list of supported ciphers.
-#Default:
-# none
-
-# TAG: sslproxy_cafile
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# file containing CA certificates to use when verifying server
-# certificates while proxying https:// URLs
-#Default:
-# none
-
-# TAG: sslproxy_capath
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# directory containing CA certificates to use when verifying
-# server certificates while proxying https:// URLs
-#Default:
-# none
-
-# TAG: sslproxy_session_ttl
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Sets the timeout value for SSL sessions
-#Default:
-# sslproxy_session_ttl 300
-
-# TAG: sslproxy_session_cache_size
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Sets the cache size to use for ssl session
-#Default:
-# sslproxy_session_cache_size 2 MB
-
-# TAG: sslproxy_foreign_intermediate_certs
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Many origin servers fail to send their full server certificate
-# chain for verification, assuming the client already has or can
-# easily locate any missing intermediate certificates.
-#
-# Squid uses the certificates from the specified file to fill in
-# these missing chains when trying to validate origin server
-# certificate chains.
-#
-# The file is expected to contain zero or more PEM-encoded
-# intermediate certificates. These certificates are not treated
-# as trusted root certificates, and any self-signed certificate in
-# this file will be ignored.
-#Default:
-# none
-
-# TAG: sslproxy_cert_sign_hash
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Sets the hashing algorithm to use when signing generated certificates.
-# Valid algorithm names depend on the OpenSSL library used. The following
-# names are usually available: sha1, sha256, sha512, and md5. Please see
-# your OpenSSL library manual for the available hashes. By default, Squids
-# that support this option use sha256 hashes.
-#
-# Squid does not forcefully purge cached certificates that were generated
-# with an algorithm other than the currently configured one. They remain
-# in the cache, subject to the regular cache eviction policy, and become
-# useful if the algorithm changes again.
-#Default:
-# none
-
-# TAG: ssl_bump
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# This option is consulted when a CONNECT request is received on
-# an http_port (or a new connection is intercepted at an
-# https_port), provided that port was configured with an ssl-bump
-# flag. The subsequent data on the connection is either treated as
-# HTTPS and decrypted OR tunneled at TCP level without decryption,
-# depending on the first matching bumping "action".
-#
-# ssl_bump <action> [!]acl ...
-#
-# The following bumping actions are currently supported:
-#
-# splice
-# Become a TCP tunnel without decrypting proxied traffic.
-# This is the default action.
-#
-# bump
-# Establish a secure connection with the server and, using a
-# mimicked server certificate, with the client.
-#
-# peek
-# Receive client (step SslBump1) or server (step SslBump2)
-# certificate while preserving the possibility of splicing the
-# connection. Peeking at the server certificate (during step 2)
-# usually precludes bumping of the connection at step 3.
-#
-# stare
-# Receive client (step SslBump1) or server (step SslBump2)
-# certificate while preserving the possibility of bumping the
-# connection. Staring at the server certificate (during step 2)
-# usually precludes splicing of the connection at step 3.
-#
-# terminate
-# Close client and server connections.
-#
-# Backward compatibility actions available at step SslBump1:
-#
-# client-first
-# Bump the connection. Establish a secure connection with the
-# client first, then connect to the server. This old mode does
-# not allow Squid to mimic server SSL certificate and does not
-# work with intercepted SSL connections.
-#
-# server-first
-# Bump the connection. Establish a secure connection with the
-# server first, then establish a secure connection with the
-# client, using a mimicked server certificate. Works with both
-# CONNECT requests and intercepted SSL connections, but does
-# not allow to make decisions based on SSL handshake info.
-#
-# peek-and-splice
-# Decide whether to bump or splice the connection based on
-# client-to-squid and server-to-squid SSL hello messages.
-# XXX: Remove.
-#
-# none
-# Same as the "splice" action.
-#
-# All ssl_bump rules are evaluated at each of the supported bumping
-# steps. Rules with actions that are impossible at the current step are
-# ignored. The first matching ssl_bump action wins and is applied at the
-# end of the current step. If no rules match, the splice action is used.
-# See the at_step ACL for a list of the supported SslBump steps.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-# See also: http_port ssl-bump, https_port ssl-bump, and acl at_step.
-#
-#
-# # Example: Bump all TLS connections except those originating from
-# # localhost or those going to example.com.
-#
-# acl broken_sites ssl::server_name .example.com
-# ssl_bump splice localhost
-# ssl_bump splice broken_sites
-# ssl_bump bump all
-#Default:
-# Become a TCP tunnel without decrypting proxied traffic.
-
-# TAG: sslproxy_flags
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Various flags modifying the use of SSL while proxying https:// URLs:
-# DONT_VERIFY_PEER Accept certificates that fail verification.
-# For refined control, see sslproxy_cert_error.
-# NO_DEFAULT_CA Don't use the default CA list built in
-# to OpenSSL.
-#Default:
-# none
-
-# TAG: sslproxy_cert_error
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Use this ACL to bypass server certificate validation errors.
-#
-# For example, the following lines will bypass all validation errors
-# when talking to servers for example.com. All other
-# validation errors will result in ERR_SECURE_CONNECT_FAIL error.
-#
-# acl BrokenButTrustedServers dstdomain example.com
-# sslproxy_cert_error allow BrokenButTrustedServers
-# sslproxy_cert_error deny all
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-# Using slow acl types may result in server crashes
-#
-# Without this option, all server certificate validation errors
-# terminate the transaction to protect Squid and the client.
-#
-# SQUID_X509_V_ERR_INFINITE_VALIDATION error cannot be bypassed
-# but should not happen unless your OpenSSL library is buggy.
-#
-# SECURITY WARNING:
-# Bypassing validation errors is dangerous because an
-# error usually implies that the server cannot be trusted
-# and the connection may be insecure.
-#
-# See also: sslproxy_flags and DONT_VERIFY_PEER.
-#Default:
-# Server certificate errors terminate the transaction.
-
-# TAG: sslproxy_cert_sign
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-#
-# sslproxy_cert_sign <signing algorithm> acl ...
-#
-# The following certificate signing algorithms are supported:
-#
-# signTrusted
-# Sign using the configured CA certificate which is usually
-# placed in and trusted by end-user browsers. This is the
-# default for trusted origin server certificates.
-#
-# signUntrusted
-# Sign to guarantee an X509_V_ERR_CERT_UNTRUSTED browser error.
-# This is the default for untrusted origin server certificates
-# that are not self-signed (see ssl::certUntrusted).
-#
-# signSelf
-# Sign using a self-signed certificate with the right CN to
-# generate a X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT error in the
-# browser. This is the default for self-signed origin server
-# certificates (see ssl::certSelfSigned).
-#
-# This clause only supports fast acl types.
-#
-# When sslproxy_cert_sign acl(s) match, Squid uses the corresponding
-# signing algorithm to generate the certificate and ignores all
-# subsequent sslproxy_cert_sign options (the first match wins). If no
-# acl(s) match, the default signing algorithm is determined by errors
-# detected when obtaining and validating the origin server certificate.
-#
-# WARNING: SQUID_X509_V_ERR_DOMAIN_MISMATCH and ssl:certDomainMismatch can
-# be used with sslproxy_cert_adapt, but if and only if Squid is bumping a
-# CONNECT request that carries a domain name. In all other cases (CONNECT
-# to an IP address or an intercepted SSL connection), Squid cannot detect
-# the domain mismatch at certificate generation time when
-# bump-server-first is used.
-#Default:
-# none
-
-# TAG: sslproxy_cert_adapt
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-#
-# sslproxy_cert_adapt <adaptation algorithm> acl ...
-#
-# The following certificate adaptation algorithms are supported:
-#
-# setValidAfter
-# Sets the "Not After" property to the "Not After" property of
-# the CA certificate used to sign generated certificates.
-#
-# setValidBefore
-# Sets the "Not Before" property to the "Not Before" property of
-# the CA certificate used to sign generated certificates.
-#
-# setCommonName or setCommonName{CN}
-# Sets Subject.CN property to the host name specified as a
-# CN parameter or, if no explicit CN parameter was specified,
-# extracted from the CONNECT request. It is a misconfiguration
-# to use setCommonName without an explicit parameter for
-# intercepted or tproxied SSL connections.
-#
-# This clause only supports fast acl types.
-#
-# Squid first groups sslproxy_cert_adapt options by adaptation algorithm.
-# Within a group, when sslproxy_cert_adapt acl(s) match, Squid uses the
-# corresponding adaptation algorithm to generate the certificate and
-# ignores all subsequent sslproxy_cert_adapt options in that algorithm's
-# group (i.e., the first match wins within each algorithm group). If no
-# acl(s) match, the default mimicking action takes place.
-#
-# WARNING: SQUID_X509_V_ERR_DOMAIN_MISMATCH and ssl:certDomainMismatch can
-# be used with sslproxy_cert_adapt, but if and only if Squid is bumping a
-# CONNECT request that carries a domain name. In all other cases (CONNECT
-# to an IP address or an intercepted SSL connection), Squid cannot detect
-# the domain mismatch at certificate generation time when
-# bump-server-first is used.
-#Default:
-# none
-
-# TAG: sslpassword_program
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Specify a program used for entering SSL key passphrases
-# when using encrypted SSL certificate keys. If not specified
-# keys must either be unencrypted, or Squid started with the -N
-# option to allow it to query interactively for the passphrase.
-#
-# The key file name is given as argument to the program allowing
-# selection of the right password if you have multiple encrypted
-# keys.
-#Default:
-# none
-
-# OPTIONS RELATING TO EXTERNAL SSL_CRTD
-# -----------------------------------------------------------------------------
-
-# TAG: sslcrtd_program
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl-crtd
-#
-# Specify the location and options of the executable for ssl_crtd process.
-# /usr/lib/squid/ssl_crtd program requires -s and -M parameters
-# For more information use:
-# /usr/lib/squid/ssl_crtd -h
-#Default:
-# sslcrtd_program /usr/lib/squid/ssl_crtd -s /var/lib/ssl_db -M 4MB
-
-# TAG: sslcrtd_children
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl-crtd
-#
-# The maximum number of processes spawn to service ssl server.
-# The maximum this may be safely set to is 32.
-#
-# The startup= and idle= options allow some measure of skew in your
-# tuning.
-#
-# startup=N
-#
-# Sets the minimum number of processes to spawn when Squid
-# starts or reconfigures. When set to zero the first request will
-# cause spawning of the first child process to handle it.
-#
-# Starting too few children temporary slows Squid under load while it
-# tries to spawn enough additional processes to cope with traffic.
-#
-# idle=N
-#
-# Sets a minimum of how many processes Squid is to try and keep available
-# at all times. When traffic begins to rise above what the existing
-# processes can handle this many more will be spawned up to the maximum
-# configured. A minimum setting of 1 is required.
-#
-# You must have at least one ssl_crtd process.
-#Default:
-# sslcrtd_children 32 startup=5 idle=1
-
-# TAG: sslcrtvalidator_program
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# Specify the location and options of the executable for ssl_crt_validator
-# process.
-#
-# Usage: sslcrtvalidator_program [ttl=n] [cache=n] path ...
-#
-# Options:
-# ttl=n TTL in seconds for cached results. The default is 60 secs
-# cache=n limit the result cache size. The default value is 2048
-#Default:
-# none
-
-# TAG: sslcrtvalidator_children
-# Note: This option is only available if Squid is rebuilt with the
-# --with-openssl
-#
-# The maximum number of processes spawn to service SSL server.
-# The maximum this may be safely set to is 32.
-#
-# The startup= and idle= options allow some measure of skew in your
-# tuning.
-#
-# startup=N
-#
-# Sets the minimum number of processes to spawn when Squid
-# starts or reconfigures. When set to zero the first request will
-# cause spawning of the first child process to handle it.
-#
-# Starting too few children temporary slows Squid under load while it
-# tries to spawn enough additional processes to cope with traffic.
-#
-# idle=N
-#
-# Sets a minimum of how many processes Squid is to try and keep available
-# at all times. When traffic begins to rise above what the existing
-# processes can handle this many more will be spawned up to the maximum
-# configured. A minimum setting of 1 is required.
-#
-# concurrency=
-#
-# The number of requests each certificate validator helper can handle in
-# parallel. A value of 0 indicates the certficate validator does not
-# support concurrency. Defaults to 1.
-#
-# When this directive is set to a value >= 1 then the protocol
-# used to communicate with the helper is modified to include
-# a request ID in front of the request/response. The request
-# ID from the request must be echoed back with the response
-# to that request.
-#
-# You must have at least one ssl_crt_validator process.
-#Default:
-# sslcrtvalidator_children 32 startup=5 idle=1 concurrency=1
-
-# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM
-# -----------------------------------------------------------------------------
-
-# TAG: cache_peer
-# To specify other caches in a hierarchy, use the format:
-#
-# cache_peer hostname type http-port icp-port [options]
-#
-# For example,
-#
-# # proxy icp
-# # hostname type port port options
-# # -------------------- -------- ----- ----- -----------
-# cache_peer parent.foo.net parent 3128 3130 default
-# cache_peer sib1.foo.net sibling 3128 3130 proxy-only
-# cache_peer sib2.foo.net sibling 3128 3130 proxy-only
-# cache_peer example.com parent 80 0 default
-# cache_peer cdn.example.com sibling 3128 0
-#
-# type: either 'parent', 'sibling', or 'multicast'.
-#
-# proxy-port: The port number where the peer accept HTTP requests.
-# For other Squid proxies this is usually 3128
-# For web servers this is usually 80
-#
-# icp-port: Used for querying neighbor caches about objects.
-# Set to 0 if the peer does not support ICP or HTCP.
-# See ICP and HTCP options below for additional details.
-#
-#
-# ==== ICP OPTIONS ====
-#
-# You MUST also set icp_port and icp_access explicitly when using these options.
-# The defaults will prevent peer traffic using ICP.
-#
-#
-# no-query Disable ICP queries to this neighbor.
-#
-# multicast-responder
-# Indicates the named peer is a member of a multicast group.
-# ICP queries will not be sent directly to the peer, but ICP
-# replies will be accepted from it.
-#
-# closest-only Indicates that, for ICP_OP_MISS replies, we'll only forward
-# CLOSEST_PARENT_MISSes and never FIRST_PARENT_MISSes.
-#
-# background-ping
-# To only send ICP queries to this neighbor infrequently.
-# This is used to keep the neighbor round trip time updated
-# and is usually used in conjunction with weighted-round-robin.
-#
-#
-# ==== HTCP OPTIONS ====
-#
-# You MUST also set htcp_port and htcp_access explicitly when using these options.
-# The defaults will prevent peer traffic using HTCP.
-#
-#
-# htcp Send HTCP, instead of ICP, queries to the neighbor.
-# You probably also want to set the "icp-port" to 4827
-# instead of 3130. This directive accepts a comma separated
-# list of options described below.
-#
-# htcp=oldsquid Send HTCP to old Squid versions (2.5 or earlier).
-#
-# htcp=no-clr Send HTCP to the neighbor but without
-# sending any CLR requests. This cannot be used with
-# only-clr.
-#
-# htcp=only-clr Send HTCP to the neighbor but ONLY CLR requests.
-# This cannot be used with no-clr.
-#
-# htcp=no-purge-clr
-# Send HTCP to the neighbor including CLRs but only when
-# they do not result from PURGE requests.
-#
-# htcp=forward-clr
-# Forward any HTCP CLR requests this proxy receives to the peer.
-#
-#
-# ==== PEER SELECTION METHODS ====
-#
-# The default peer selection method is ICP, with the first responding peer
-# being used as source. These options can be used for better load balancing.
-#
-#
-# default This is a parent cache which can be used as a "last-resort"
-# if a peer cannot be located by any of the peer-selection methods.
-# If specified more than once, only the first is used.
-#
-# round-robin Load-Balance parents which should be used in a round-robin
-# fashion in the absence of any ICP queries.
-# weight=N can be used to add bias.
-#
-# weighted-round-robin
-# Load-Balance parents which should be used in a round-robin
-# fashion with the frequency of each parent being based on the
-# round trip time. Closer parents are used more often.
-# Usually used for background-ping parents.
-# weight=N can be used to add bias.
-#
-# carp Load-Balance parents which should be used as a CARP array.
-# The requests will be distributed among the parents based on the
-# CARP load balancing hash function based on their weight.
-#
-# userhash Load-balance parents based on the client proxy_auth or ident username.
-#
-# sourcehash Load-balance parents based on the client source IP.
-#
-# multicast-siblings
-# To be used only for cache peers of type "multicast".
-# ALL members of this multicast group have "sibling"
-# relationship with it, not "parent". This is to a multicast
-# group when the requested object would be fetched only from
-# a "parent" cache, anyway. It's useful, e.g., when
-# configuring a pool of redundant Squid proxies, being
-# members of the same multicast group.
-#
-#
-# ==== PEER SELECTION OPTIONS ====
-#
-# weight=N use to affect the selection of a peer during any weighted
-# peer-selection mechanisms.
-# The weight must be an integer; default is 1,
-# larger weights are favored more.
-# This option does not affect parent selection if a peering
-# protocol is not in use.
-#
-# basetime=N Specify a base amount to be subtracted from round trip
-# times of parents.
-# It is subtracted before division by weight in calculating
-# which parent to fectch from. If the rtt is less than the
-# base time the rtt is set to a minimal value.
-#
-# ttl=N Specify a TTL to use when sending multicast ICP queries
-# to this address.
-# Only useful when sending to a multicast group.
-# Because we don't accept ICP replies from random
-# hosts, you must configure other group members as
-# peers with the 'multicast-responder' option.
-#
-# no-delay To prevent access to this neighbor from influencing the
-# delay pools.
-#
-# digest-url=URL Tell Squid to fetch the cache digest (if digests are
-# enabled) for this host from the specified URL rather
-# than the Squid default location.
-#
-#
-# ==== CARP OPTIONS ====
-#
-# carp-key=key-specification
-# use a different key than the full URL to hash against the peer.
-# the key-specification is a comma-separated list of the keywords
-# scheme, host, port, path, params
-# Order is not important.
-#
-# ==== ACCELERATOR / REVERSE-PROXY OPTIONS ====
-#
-# originserver Causes this parent to be contacted as an origin server.
-# Meant to be used in accelerator setups when the peer
-# is a web server.
-#
-# forceddomain=name
-# Set the Host header of requests forwarded to this peer.
-# Useful in accelerator setups where the server (peer)
-# expects a certain domain name but clients may request
-# others. ie example.com or www.example.com
-#
-# no-digest Disable request of cache digests.
-#
-# no-netdb-exchange
-# Disables requesting ICMP RTT database (NetDB).
-#
-#
-# ==== AUTHENTICATION OPTIONS ====
-#
-# login=user:password
-# If this is a personal/workgroup proxy and your parent
-# requires proxy authentication.
-#
-# Note: The string can include URL escapes (i.e. %20 for
-# spaces). This also means % must be written as %%.
-#
-# login=PASSTHRU
-# Send login details received from client to this peer.
-# Both Proxy- and WWW-Authorization headers are passed
-# without alteration to the peer.
-# Authentication is not required by Squid for this to work.
-#
-# Note: This will pass any form of authentication but
-# only Basic auth will work through a proxy unless the
-# connection-auth options are also used.
-#
-# login=PASS Send login details received from client to this peer.
-# Authentication is not required by this option.
-#
-# If there are no client-provided authentication headers
-# to pass on, but username and password are available
-# from an external ACL user= and password= result tags
-# they may be sent instead.
-#
-# Note: To combine this with proxy_auth both proxies must
-# share the same user database as HTTP only allows for
-# a single login (one for proxy, one for origin server).
-# Also be warned this will expose your users proxy
-# password to the peer. USE WITH CAUTION
-#
-# login=*:password
-# Send the username to the upstream cache, but with a
-# fixed password. This is meant to be used when the peer
-# is in another administrative domain, but it is still
-# needed to identify each user.
-# The star can optionally be followed by some extra
-# information which is added to the username. This can
-# be used to identify this proxy to the peer, similar to
-# the login=username:password option above.
-#
-# login=NEGOTIATE
-# If this is a personal/workgroup proxy and your parent
-# requires a secure proxy authentication.
-# The first principal from the default keytab or defined by
-# the environment variable KRB5_KTNAME will be used.
-#
-# WARNING: The connection may transmit requests from multiple
-# clients. Negotiate often assumes end-to-end authentication
-# and a single-client. Which is not strictly true here.
-#
-# login=NEGOTIATE:principal_name
-# If this is a personal/workgroup proxy and your parent
-# requires a secure proxy authentication.
-# The principal principal_name from the default keytab or
-# defined by the environment variable KRB5_KTNAME will be
-# used.
-#
-# WARNING: The connection may transmit requests from multiple
-# clients. Negotiate often assumes end-to-end authentication
-# and a single-client. Which is not strictly true here.
-#
-# connection-auth=on|off
-# Tell Squid that this peer does or not support Microsoft
-# connection oriented authentication, and any such
-# challenges received from there should be ignored.
-# Default is auto to automatically determine the status
-# of the peer.
-#
-#
-# ==== SSL / HTTPS / TLS OPTIONS ====
-#
-# ssl Encrypt connections to this peer with SSL/TLS.
-#
-# sslcert=/path/to/ssl/certificate
-# A client SSL certificate to use when connecting to
-# this peer.
-#
-# sslkey=/path/to/ssl/key
-# The private SSL key corresponding to sslcert above.
-# If 'sslkey' is not specified 'sslcert' is assumed to
-# reference a combined file containing both the
-# certificate and the key.
-#
-# sslversion=1|2|3|4|5|6
-# The SSL version to use when connecting to this peer
-# 1 = automatic (default)
-# 2 = SSL v2 only
-# 3 = SSL v3 only
-# 4 = TLS v1.0 only
-# 5 = TLS v1.1 only
-# 6 = TLS v1.2 only
-#
-# sslcipher=... The list of valid SSL ciphers to use when connecting
-# to this peer.
-#
-# ssloptions=... Specify various SSL implementation options:
-#
-# NO_SSLv2 Disallow the use of SSLv2
-# NO_SSLv3 Disallow the use of SSLv3
-# NO_TLSv1 Disallow the use of TLSv1.0
-# NO_TLSv1_1 Disallow the use of TLSv1.1
-# NO_TLSv1_2 Disallow the use of TLSv1.2
-#
-# SINGLE_DH_USE
-# Always create a new key when using
-# temporary/ephemeral DH key exchanges
-#
-# NO_TICKET
-# Disable use of RFC5077 session tickets. Some servers
-# may have problems understanding the TLS extension due
-# to ambiguous specification in RFC4507.
-#
-# ALL Enable various bug workarounds
-# suggested as "harmless" by OpenSSL
-# Be warned that this reduces SSL/TLS
-# strength to some attacks.
-#
-# See the OpenSSL SSL_CTX_set_options documentation for a
-# more complete list.
-#
-# sslcafile=... A file containing additional CA certificates to use
-# when verifying the peer certificate.
-#
-# sslcapath=... A directory containing additional CA certificates to
-# use when verifying the peer certificate.
-#
-# sslcrlfile=... A certificate revocation list file to use when
-# verifying the peer certificate.
-#
-# sslflags=... Specify various flags modifying the SSL implementation:
-#
-# DONT_VERIFY_PEER
-# Accept certificates even if they fail to
-# verify.
-# NO_DEFAULT_CA
-# Don't use the default CA list built in
-# to OpenSSL.
-# DONT_VERIFY_DOMAIN
-# Don't verify the peer certificate
-# matches the server name
-#
-# ssldomain= The peer name as advertised in it's certificate.
-# Used for verifying the correctness of the received peer
-# certificate. If not specified the peer hostname will be
-# used.
-#
-# front-end-https
-# Enable the "Front-End-Https: On" header needed when
-# using Squid as a SSL frontend in front of Microsoft OWA.
-# See MS KB document Q307347 for details on this header.
-# If set to auto the header will only be added if the
-# request is forwarded as a https:// URL.
-#
-#
-# ==== GENERAL OPTIONS ====
-#
-# connect-timeout=N
-# A peer-specific connect timeout.
-# Also see the peer_connect_timeout directive.
-#
-# connect-fail-limit=N
-# How many times connecting to a peer must fail before
-# it is marked as down. Standby connection failures
-# count towards this limit. Default is 10.
-#
-# allow-miss Disable Squid's use of only-if-cached when forwarding
-# requests to siblings. This is primarily useful when
-# icp_hit_stale is used by the sibling. Excessive use
-# of this option may result in forwarding loops. One way
-# to prevent peering loops when using this option, is to
-# deny cache peer usage on requests from a peer:
-# acl fromPeer ...
-# cache_peer_access peerName deny fromPeer
-#
-# max-conn=N Limit the number of concurrent connections the Squid
-# may open to this peer, including already opened idle
-# and standby connections. There is no peer-specific
-# connection limit by default.
-#
-# A peer exceeding the limit is not used for new
-# requests unless a standby connection is available.
-#
-# max-conn currently works poorly with idle persistent
-# connections: When a peer reaches its max-conn limit,
-# and there are idle persistent connections to the peer,
-# the peer may not be selected because the limiting code
-# does not know whether Squid can reuse those idle
-# connections.
-#
-# standby=N Maintain a pool of N "hot standby" connections to an
-# UP peer, available for requests when no idle
-# persistent connection is available (or safe) to use.
-# By default and with zero N, no such pool is maintained.
-# N must not exceed the max-conn limit (if any).
-#
-# At start or after reconfiguration, Squid opens new TCP
-# standby connections until there are N connections
-# available and then replenishes the standby pool as
-# opened connections are used up for requests. A used
-# connection never goes back to the standby pool, but
-# may go to the regular idle persistent connection pool
-# shared by all peers and origin servers.
-#
-# Squid never opens multiple new standby connections
-# concurrently. This one-at-a-time approach minimizes
-# flooding-like effect on peers. Furthermore, just a few
-# standby connections should be sufficient in most cases
-# to supply most new requests with a ready-to-use
-# connection.
-#
-# Standby connections obey server_idle_pconn_timeout.
-# For the feature to work as intended, the peer must be
-# configured to accept and keep them open longer than
-# the idle timeout at the connecting Squid, to minimize
-# race conditions typical to idle used persistent
-# connections. Default request_timeout and
-# server_idle_pconn_timeout values ensure such a
-# configuration.
-#
-# name=xxx Unique name for the peer.
-# Required if you have multiple peers on the same host
-# but different ports.
-# This name can be used in cache_peer_access and similar
-# directives to identify the peer.
-# Can be used by outgoing access controls through the
-# peername ACL type.
-#
-# no-tproxy Do not use the client-spoof TPROXY support when forwarding
-# requests to this peer. Use normal address selection instead.
-# This overrides the spoof_client_ip ACL.
-#
-# proxy-only objects fetched from the peer will not be stored locally.
-#
-#Default:
-# none
-
-# TAG: cache_peer_domain
-# Use to limit the domains for which a neighbor cache will be
-# queried.
-#
-# Usage:
-# cache_peer_domain cache-host domain [domain ...]
-# cache_peer_domain cache-host !domain
-#
-# For example, specifying
-#
-# cache_peer_domain parent.foo.net .edu
-#
-# has the effect such that UDP query packets are sent to
-# 'bigserver' only when the requested object exists on a
-# server in the .edu domain. Prefixing the domainname
-# with '!' means the cache will be queried for objects
-# NOT in that domain.
-#
-# NOTE: * Any number of domains may be given for a cache-host,
-# either on the same or separate lines.
-# * When multiple domains are given for a particular
-# cache-host, the first matched domain is applied.
-# * Cache hosts with no domain restrictions are queried
-# for all requests.
-# * There are no defaults.
-# * There is also a 'cache_peer_access' tag in the ACL
-# section.
-#Default:
-# none
-
-# TAG: cache_peer_access
-# Restricts usage of cache_peer proxies.
-#
-# Usage:
-# cache_peer_access peer-name allow|deny [!]aclname ...
-#
-# For the required peer-name parameter, use either the value of the
-# cache_peer name=value parameter or, if name=value is missing, the
-# cache_peer hostname parameter.
-#
-# This directive narrows down the selection of peering candidates, but
-# does not determine the order in which the selected candidates are
-# contacted. That order is determined by the peer selection algorithms
-# (see PEER SELECTION sections in the cache_peer documentation).
-#
-# If a deny rule matches, the corresponding peer will not be contacted
-# for the current transaction -- Squid will not send ICP queries and
-# will not forward HTTP requests to that peer. An allow match leaves
-# the corresponding peer in the selection. The first match for a given
-# peer wins for that peer.
-#
-# The relative order of cache_peer_access directives for the same peer
-# matters. The relative order of any two cache_peer_access directives
-# for different peers does not matter. To ease interpretation, it is a
-# good idea to group cache_peer_access directives for the same peer
-# together.
-#
-# A single cache_peer_access directive may be evaluated multiple times
-# for a given transaction because individual peer selection algorithms
-# may check it independently from each other. These redundant checks
-# may be optimized away in future Squid versions.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# No peer usage restrictions.
-
-# TAG: neighbor_type_domain
-# Modify the cache_peer neighbor type when passing requests
-# about specific domains to the peer.
-#
-# Usage:
-# neighbor_type_domain neighbor parent|sibling domain domain ...
-#
-# For example:
-# cache_peer foo.example.com parent 3128 3130
-# neighbor_type_domain foo.example.com sibling .au .de
-#
-# The above configuration treats all requests to foo.example.com as a
-# parent proxy unless the request is for a .au or .de ccTLD domain name.
-#Default:
-# The peer type from cache_peer directive is used for all requests to that peer.
-
-# TAG: dead_peer_timeout (seconds)
-# This controls how long Squid waits to declare a peer cache
-# as "dead." If there are no ICP replies received in this
-# amount of time, Squid will declare the peer dead and not
-# expect to receive any further ICP replies. However, it
-# continues to send ICP queries, and will mark the peer as
-# alive upon receipt of the first subsequent ICP reply.
-#
-# This timeout also affects when Squid expects to receive ICP
-# replies from peers. If more than 'dead_peer' seconds have
-# passed since the last ICP reply was received, Squid will not
-# expect to receive an ICP reply on the next query. Thus, if
-# your time between requests is greater than this timeout, you
-# will see a lot of requests sent DIRECT to origin servers
-# instead of to your parents.
-#Default:
-# dead_peer_timeout 10 seconds
-
-# TAG: forward_max_tries
-# Controls how many different forward paths Squid will try
-# before giving up. See also forward_timeout.
-#
-# NOTE: connect_retries (default: none) can make each of these
-# possible forwarding paths be tried multiple times.
-#Default:
-# forward_max_tries 25
-
-# MEMORY CACHE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: cache_mem (bytes)
-# NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE.
-# IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL
-# USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER
-# THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS.
-#
-# 'cache_mem' specifies the ideal amount of memory to be used
-# for:
-# * In-Transit objects
-# * Hot Objects
-# * Negative-Cached objects
-#
-# Data for these objects are stored in 4 KB blocks. This
-# parameter specifies the ideal upper limit on the total size of
-# 4 KB blocks allocated. In-Transit objects take the highest
-# priority.
-#
-# In-transit objects have priority over the others. When
-# additional space is needed for incoming data, negative-cached
-# and hot objects will be released. In other words, the
-# negative-cached and hot objects will fill up any unused space
-# not needed for in-transit objects.
-#
-# If circumstances require, this limit will be exceeded.
-# Specifically, if your incoming request rate requires more than
-# 'cache_mem' of memory to hold in-transit objects, Squid will
-# exceed this limit to satisfy the new requests. When the load
-# decreases, blocks will be freed until the high-water mark is
-# reached. Thereafter, blocks will be used to store hot
-# objects.
-#
-# If shared memory caching is enabled, Squid does not use the shared
-# cache space for in-transit objects, but they still consume as much
-# local memory as they need. For more details about the shared memory
-# cache, see memory_cache_shared.
-#Default:
-# cache_mem 256 MB
-
-# TAG: maximum_object_size_in_memory (bytes)
-# Objects greater than this size will not be attempted to kept in
-# the memory cache. This should be set high enough to keep objects
-# accessed frequently in memory to improve performance whilst low
-# enough to keep larger objects from hoarding cache_mem.
-#Default:
-# maximum_object_size_in_memory 512 KB
-
-# TAG: memory_cache_shared on|off
-# Controls whether the memory cache is shared among SMP workers.
-#
-# The shared memory cache is meant to occupy cache_mem bytes and replace
-# the non-shared memory cache, although some entities may still be
-# cached locally by workers for now (e.g., internal and in-transit
-# objects may be served from a local memory cache even if shared memory
-# caching is enabled).
-#
-# By default, the memory cache is shared if and only if all of the
-# following conditions are satisfied: Squid runs in SMP mode with
-# multiple workers, cache_mem is positive, and Squid environment
-# supports required IPC primitives (e.g., POSIX shared memory segments
-# and GCC-style atomic operations).
-#
-# To avoid blocking locks, shared memory uses opportunistic algorithms
-# that do not guarantee that every cachable entity that could have been
-# shared among SMP workers will actually be shared.
-#Default:
-# "on" where supported if doing memory caching with multiple SMP workers.
-
-# TAG: memory_cache_mode
-# Controls which objects to keep in the memory cache (cache_mem)
-#
-# always Keep most recently fetched objects in memory (default)
-#
-# disk Only disk cache hits are kept in memory, which means
-# an object must first be cached on disk and then hit
-# a second time before cached in memory.
-#
-# network Only objects fetched from network is kept in memory
-#Default:
-# Keep the most recently fetched objects in memory
-
-# TAG: memory_replacement_policy
-# The memory replacement policy parameter determines which
-# objects are purged from memory when memory space is needed.
-#
-# See cache_replacement_policy for details on algorithms.
-#Default:
-# memory_replacement_policy lru
-
-# DISK CACHE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: cache_replacement_policy
-# The cache replacement policy parameter determines which
-# objects are evicted (replaced) when disk space is needed.
-#
-# lru : Squid's original list based LRU policy
-# heap GDSF : Greedy-Dual Size Frequency
-# heap LFUDA: Least Frequently Used with Dynamic Aging
-# heap LRU : LRU policy implemented using a heap
-#
-# Applies to any cache_dir lines listed below this directive.
-#
-# The LRU policies keeps recently referenced objects.
-#
-# The heap GDSF policy optimizes object hit rate by keeping smaller
-# popular objects in cache so it has a better chance of getting a
-# hit. It achieves a lower byte hit rate than LFUDA though since
-# it evicts larger (possibly popular) objects.
-#
-# The heap LFUDA policy keeps popular objects in cache regardless of
-# their size and thus optimizes byte hit rate at the expense of
-# hit rate since one large, popular object will prevent many
-# smaller, slightly less popular objects from being cached.
-#
-# Both policies utilize a dynamic aging mechanism that prevents
-# cache pollution that can otherwise occur with frequency-based
-# replacement policies.
-#
-# NOTE: if using the LFUDA replacement policy you should increase
-# the value of maximum_object_size above its default of 4 MB to
-# to maximize the potential byte hit rate improvement of LFUDA.
-#
-# For more information about the GDSF and LFUDA cache replacement
-# policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html
-# and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html.
-#Default:
-# cache_replacement_policy lru
-
-# TAG: minimum_object_size (bytes)
-# Objects smaller than this size will NOT be saved on disk. The
-# value is specified in bytes, and the default is 0 KB, which
-# means all responses can be stored.
-#Default:
-# no limit
-
-# TAG: maximum_object_size (bytes)
-# Set the default value for max-size parameter on any cache_dir.
-# The value is specified in bytes, and the default is 4 MB.
-#
-# If you wish to get a high BYTES hit ratio, you should probably
-# increase this (one 32 MB object hit counts for 3200 10KB
-# hits).
-#
-# If you wish to increase hit ratio more than you want to
-# save bandwidth you should leave this low.
-#
-# NOTE: if using the LFUDA replacement policy you should increase
-# this value to maximize the byte hit rate improvement of LFUDA!
-# See cache_replacement_policy for a discussion of this policy.
-#Default:
-# maximum_object_size 4 MB
-maximum_object_size 153600 KB
-
-# TAG: cache_dir
-# Format:
-# cache_dir Type Directory-Name Fs-specific-data [options]
-#
-# You can specify multiple cache_dir lines to spread the
-# cache among different disk partitions.
-#
-# Type specifies the kind of storage system to use. Only "ufs"
-# is built by default. To enable any of the other storage systems
-# see the --enable-storeio configure option.
-#
-# 'Directory' is a top-level directory where cache swap
-# files will be stored. If you want to use an entire disk
-# for caching, this can be the mount-point directory.
-# The directory must exist and be writable by the Squid
-# process. Squid will NOT create this directory for you.
-#
-# In SMP configurations, cache_dir must not precede the workers option
-# and should use configuration macros or conditionals to give each
-# worker interested in disk caching a dedicated cache directory.
-#
-#
-# ==== The ufs store type ====
-#
-# "ufs" is the old well-known Squid storage format that has always
-# been there.
-#
-# Usage:
-# cache_dir ufs Directory-Name Mbytes L1 L2 [options]
-#
-# 'Mbytes' is the amount of disk space (MB) to use under this
-# directory. The default is 100 MB. Change this to suit your
-# configuration. Do NOT put the size of your disk drive here.
-# Instead, if you want Squid to use the entire disk drive,
-# subtract 20% and use that value.
-#
-# 'L1' is the number of first-level subdirectories which
-# will be created under the 'Directory'. The default is 16.
-#
-# 'L2' is the number of second-level subdirectories which
-# will be created under each first-level directory. The default
-# is 256.
-#
-#
-# ==== The aufs store type ====
-#
-# "aufs" uses the same storage format as "ufs", utilizing
-# POSIX-threads to avoid blocking the main Squid process on
-# disk-I/O. This was formerly known in Squid as async-io.
-#
-# Usage:
-# cache_dir aufs Directory-Name Mbytes L1 L2 [options]
-#
-# see argument descriptions under ufs above
-#
-#
-# ==== The diskd store type ====
-#
-# "diskd" uses the same storage format as "ufs", utilizing a
-# separate process to avoid blocking the main Squid process on
-# disk-I/O.
-#
-# Usage:
-# cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n]
-#
-# see argument descriptions under ufs above
-#
-# Q1 specifies the number of unacknowledged I/O requests when Squid
-# stops opening new files. If this many messages are in the queues,
-# Squid won't open new files. Default is 64
-#
-# Q2 specifies the number of unacknowledged messages when Squid
-# starts blocking. If this many messages are in the queues,
-# Squid blocks until it receives some replies. Default is 72
-#
-# When Q1 < Q2 (the default), the cache directory is optimized
-# for lower response time at the expense of a decrease in hit
-# ratio. If Q1 > Q2, the cache directory is optimized for
-# higher hit ratio at the expense of an increase in response
-# time.
-#
-#
-# ==== The rock store type ====
-#
-# Usage:
-# cache_dir rock Directory-Name Mbytes [options]
-#
-# The Rock Store type is a database-style storage. All cached
-# entries are stored in a "database" file, using fixed-size slots.
-# A single entry occupies one or more slots.
-#
-# If possible, Squid using Rock Store creates a dedicated kid
-# process called "disker" to avoid blocking Squid worker(s) on disk
-# I/O. One disker kid is created for each rock cache_dir. Diskers
-# are created only when Squid, running in daemon mode, has support
-# for the IpcIo disk I/O module.
-#
-# swap-timeout=msec: Squid will not start writing a miss to or
-# reading a hit from disk if it estimates that the swap operation
-# will take more than the specified number of milliseconds. By
-# default and when set to zero, disables the disk I/O time limit
-# enforcement. Ignored when using blocking I/O module because
-# blocking synchronous I/O does not allow Squid to estimate the
-# expected swap wait time.
-#
-# max-swap-rate=swaps/sec: Artificially limits disk access using
-# the specified I/O rate limit. Swap out requests that
-# would cause the average I/O rate to exceed the limit are
-# delayed. Individual swap in requests (i.e., hits or reads) are
-# not delayed, but they do contribute to measured swap rate and
-# since they are placed in the same FIFO queue as swap out
-# requests, they may wait longer if max-swap-rate is smaller.
-# This is necessary on file systems that buffer "too
-# many" writes and then start blocking Squid and other processes
-# while committing those writes to disk. Usually used together
-# with swap-timeout to avoid excessive delays and queue overflows
-# when disk demand exceeds available disk "bandwidth". By default
-# and when set to zero, disables the disk I/O rate limit
-# enforcement. Currently supported by IpcIo module only.
-#
-# slot-size=bytes: The size of a database "record" used for
-# storing cached responses. A cached response occupies at least
-# one slot and all database I/O is done using individual slots so
-# increasing this parameter leads to more disk space waste while
-# decreasing it leads to more disk I/O overheads. Should be a
-# multiple of your operating system I/O page size. Defaults to
-# 16KBytes. A housekeeping header is stored with each slot and
-# smaller slot-sizes will be rejected. The header is smaller than
-# 100 bytes.
-#
-#
-# ==== COMMON OPTIONS ====
-#
-# no-store no new objects should be stored to this cache_dir.
-#
-# min-size=n the minimum object size in bytes this cache_dir
-# will accept. It's used to restrict a cache_dir
-# to only store large objects (e.g. AUFS) while
-# other stores are optimized for smaller objects
-# (e.g. Rock).
-# Defaults to 0.
-#
-# max-size=n the maximum object size in bytes this cache_dir
-# supports.
-# The value in maximum_object_size directive sets
-# the default unless more specific details are
-# available (ie a small store capacity).
-#
-# Note: To make optimal use of the max-size limits you should order
-# the cache_dir lines with the smallest max-size value first.
-#
-#Default:
-# No disk cache. Store cache ojects only in memory.
-#
-
-# Uncomment and adjust the following to add a disk cache directory.
-#cache_dir ufs /var/spool/squid 100 16 256
-cache_dir ufs /var/spool/squid3 16384 16 1024
-
-# TAG: store_dir_select_algorithm
-# How Squid selects which cache_dir to use when the response
-# object will fit into more than one.
-#
-# Regardless of which algorithm is used the cache_dir min-size
-# and max-size parameters are obeyed. As such they can affect
-# the selection algorithm by limiting the set of considered
-# cache_dir.
-#
-# Algorithms:
-#
-# least-load
-#
-# This algorithm is suited to caches with similar cache_dir
-# sizes and disk speeds.
-#
-# The disk with the least I/O pending is selected.
-# When there are multiple disks with the same I/O load ranking
-# the cache_dir with most available capacity is selected.
-#
-# When a mix of cache_dir sizes are configured the faster disks
-# have a naturally lower I/O loading and larger disks have more
-# capacity. So space used to store objects and data throughput
-# may be very unbalanced towards larger disks.
-#
-#
-# round-robin
-#
-# This algorithm is suited to caches with unequal cache_dir
-# disk sizes.
-#
-# Each cache_dir is selected in a rotation. The next suitable
-# cache_dir is used.
-#
-# Available cache_dir capacity is only considered in relation
-# to whether the object will fit and meets the min-size and
-# max-size parameters.
-#
-# Disk I/O loading is only considered to prevent overload on slow
-# disks. This algorithm does not spread objects by size, so any
-# I/O loading per-disk may appear very unbalanced and volatile.
-#
-# If several cache_dirs use similar min-size, max-size, or other
-# limits to to reject certain responses, then do not group such
-# cache_dir lines together, to avoid round-robin selection bias
-# towards the first cache_dir after the group. Instead, interleave
-# cache_dir lines from different groups. For example:
-#
-# store_dir_select_algorithm round-robin
-# cache_dir rock /hdd1 ... min-size=100000
-# cache_dir rock /ssd1 ... max-size=99999
-# cache_dir rock /hdd2 ... min-size=100000
-# cache_dir rock /ssd2 ... max-size=99999
-# cache_dir rock /hdd3 ... min-size=100000
-# cache_dir rock /ssd3 ... max-size=99999
-#Default:
-# store_dir_select_algorithm least-load
-
-# TAG: max_open_disk_fds
-# To avoid having disk as the I/O bottleneck Squid can optionally
-# bypass the on-disk cache if more than this amount of disk file
-# descriptors are open.
-#
-# A value of 0 indicates no limit.
-#Default:
-# no limit
-
-# TAG: cache_swap_low (percent, 0-100)
-# The low-water mark for AUFS/UFS/diskd cache object eviction by
-# the cache_replacement_policy algorithm.
-#
-# Removal begins when the swap (disk) usage of a cache_dir is
-# above this low-water mark and attempts to maintain utilization
-# near the low-water mark.
-#
-# As swap utilization increases towards the high-water mark set
-# by cache_swap_high object eviction becomes more agressive.
-#
-# The value difference in percentages between low- and high-water
-# marks represent an eviction rate of 300 objects per second and
-# the rate continues to scale in agressiveness by multiples of
-# this above the high-water mark.
-#
-# Defaults are 90% and 95%. If you have a large cache, 5% could be
-# hundreds of MB. If this is the case you may wish to set these
-# numbers closer together.
-#
-# See also cache_swap_high and cache_replacement_policy
-#Default:
-# cache_swap_low 90
-
-# TAG: cache_swap_high (percent, 0-100)
-# The high-water mark for AUFS/UFS/diskd cache object eviction by
-# the cache_replacement_policy algorithm.
-#
-# Removal begins when the swap (disk) usage of a cache_dir is
-# above the low-water mark set by cache_swap_low and attempts to
-# maintain utilization near the low-water mark.
-#
-# As swap utilization increases towards this high-water mark object
-# eviction becomes more agressive.
-#
-# The value difference in percentages between low- and high-water
-# marks represent an eviction rate of 300 objects per second and
-# the rate continues to scale in agressiveness by multiples of
-# this above the high-water mark.
-#
-# Defaults are 90% and 95%. If you have a large cache, 5% could be
-# hundreds of MB. If this is the case you may wish to set these
-# numbers closer together.
-#
-# See also cache_swap_low and cache_replacement_policy
-#Default:
-# cache_swap_high 95
-
-# LOGFILE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: logformat
-# Usage:
-#
-# logformat <name> <format specification>
-#
-# Defines an access log format.
-#
-# The <format specification> is a string with embedded % format codes
-#
-# % format codes all follow the same basic structure where all but
-# the formatcode is optional. Output strings are automatically escaped
-# as required according to their context and the output format
-# modifiers are usually not needed, but can be specified if an explicit
-# output format is desired.
-#
-# % ["|[|'|#] [-] [[0]width] [{argument}] formatcode
-#
-# " output in quoted string format
-# [ output in squid text log format as used by log_mime_hdrs
-# # output in URL quoted format
-# ' output as-is
-#
-# - left aligned
-#
-# width minimum and/or maximum field width:
-# [width_min][.width_max]
-# When minimum starts with 0, the field is zero-padded.
-# String values exceeding maximum width are truncated.
-#
-# {arg} argument such as header name etc
-#
-# Format codes:
-#
-# % a literal % character
-# sn Unique sequence number per log line entry
-# err_code The ID of an error response served by Squid or
-# a similar internal error identifier.
-# err_detail Additional err_code-dependent error information.
-# note The annotation specified by the argument. Also
-# logs the adaptation meta headers set by the
-# adaptation_meta configuration parameter.
-# If no argument given all annotations logged.
-# The argument may include a separator to use with
-# annotation values:
-# name[:separator]
-# By default, multiple note values are separated with ","
-# and multiple notes are separated with "\r\n".
-# When logging named notes with %{name}note, the
-# explicitly configured separator is used between note
-# values. When logging all notes with %note, the
-# explicitly configured separator is used between
-# individual notes. There is currently no way to
-# specify both value and notes separators when logging
-# all notes with %note.
-#
-# Connection related format codes:
-#
-# >a Client source IP address
-# >A Client FQDN
-# >p Client source port
-# >eui Client source EUI (MAC address, EUI-48 or EUI-64 identifier)
-# >la Local IP address the client connected to
-# >lp Local port number the client connected to
-# >qos Client connection TOS/DSCP value set by Squid
-# >nfmark Client connection netfilter mark set by Squid
-#
-# la Local listening IP address the client connection was connected to.
-# lp Local listening port number the client connection was connected to.
-#
-# <a Server IP address of the last server or peer connection
-# <A Server FQDN or peer name
-# <p Server port number of the last server or peer connection
-# <la Local IP address of the last server or peer connection
-# <lp Local port number of the last server or peer connection
-# <qos Server connection TOS/DSCP value set by Squid
-# <nfmark Server connection netfilter mark set by Squid
-#
-# Time related format codes:
-#
-# ts Seconds since epoch
-# tu subsecond time (milliseconds)
-# tl Local time. Optional strftime format argument
-# default %d/%b/%Y:%H:%M:%S %z
-# tg GMT time. Optional strftime format argument
-# default %d/%b/%Y:%H:%M:%S %z
-# tr Response time (milliseconds)
-# dt Total time spent making DNS lookups (milliseconds)
-# tS Approximate master transaction start time in
-# <full seconds since epoch>.<fractional seconds> format.
-# Currently, Squid considers the master transaction
-# started when a complete HTTP request header initiating
-# the transaction is received from the client. This is
-# the same value that Squid uses to calculate transaction
-# response time when logging %tr to access.log. Currently,
-# Squid uses millisecond resolution for %tS values,
-# similar to the default access.log "current time" field
-# (%ts.%03tu).
-#
-# Access Control related format codes:
-#
-# et Tag returned by external acl
-# ea Log string returned by external acl
-# un User name (any available)
-# ul User name from authentication
-# ue User name from external acl helper
-# ui User name from ident
-# un A user name. Expands to the first available name
-# from the following list of information sources:
-# - authenticated user name, like %ul
-# - user name supplied by an external ACL, like %ue
-# - SSL client name, like %us
-# - ident user name, like %ui
-# credentials Client credentials. The exact meaning depends on
-# the authentication scheme: For Basic authentication,
-# it is the password; for Digest, the realm sent by the
-# client; for NTLM and Negotiate, the client challenge
-# or client credentials prefixed with "YR " or "KK ".
-#
-# HTTP related format codes:
-#
-# REQUEST
-#
-# [http::]rm Request method (GET/POST etc)
-# [http::]>rm Request method from client
-# [http::]<rm Request method sent to server or peer
-# [http::]ru Request URL from client (historic, filtered for logging)
-# [http::]>ru Request URL from client
-# [http::]<ru Request URL sent to server or peer
-# [http::]>rs Request URL scheme from client
-# [http::]<rs Request URL scheme sent to server or peer
-# [http::]>rd Request URL domain from client
-# [http::]<rd Request URL domain sent to server or peer
-# [http::]>rP Request URL port from client
-# [http::]<rP Request URL port sent to server or peer
-# [http::]rp Request URL path excluding hostname
-# [http::]>rp Request URL path excluding hostname from client
-# [http::]<rp Request URL path excluding hostname sent to server or peer
-# [http::]rv Request protocol version
-# [http::]>rv Request protocol version from client
-# [http::]<rv Request protocol version sent to server or peer
-#
-# [http::]>h Original received request header.
-# Usually differs from the request header sent by
-# Squid, although most fields are often preserved.
-# Accepts optional header field name/value filter
-# argument using name[:[separator]element] format.
-# [http::]>ha Received request header after adaptation and
-# redirection (pre-cache REQMOD vectoring point).
-# Usually differs from the request header sent by
-# Squid, although most fields are often preserved.
-# Optional header name argument as for >h
-#
-#
-# RESPONSE
-#
-# [http::]<Hs HTTP status code received from the next hop
-# [http::]>Hs HTTP status code sent to the client
-#
-# [http::]<h Reply header. Optional header name argument
-# as for >h
-#
-# [http::]mt MIME content type
-#
-#
-# SIZE COUNTERS
-#
-# [http::]st Total size of request + reply traffic with client
-# [http::]>st Total size of request received from client.
-# Excluding chunked encoding bytes.
-# [http::]<st Total size of reply sent to client (after adaptation)
-#
-# [http::]>sh Size of request headers received from client
-# [http::]<sh Size of reply headers sent to client (after adaptation)
-#
-# [http::]<sH Reply high offset sent
-# [http::]<sS Upstream object size
-#
-# [http::]<bs Number of HTTP-equivalent message body bytes
-# received from the next hop, excluding chunked
-# transfer encoding and control messages.
-# Generated FTP/Gopher listings are treated as
-# received bodies.
-#
-#
-# TIMING
-#
-# [http::]<pt Peer response time in milliseconds. The timer starts
-# when the last request byte is sent to the next hop
-# and stops when the last response byte is received.
-# [http::]<tt Total time in milliseconds. The timer
-# starts with the first connect request (or write I/O)
-# sent to the first selected peer. The timer stops
-# with the last I/O with the last peer.
-#
-# Squid handling related format codes:
-#
-# Ss Squid request status (TCP_MISS etc)
-# Sh Squid hierarchy status (DEFAULT_PARENT etc)
-#
-# SSL-related format codes:
-#
-# ssl::bump_mode SslBump decision for the transaction:
-#
-# For CONNECT requests that initiated bumping of
-# a connection and for any request received on
-# an already bumped connection, Squid logs the
-# corresponding SslBump mode ("server-first" or
-# "client-first"). See the ssl_bump option for
-# more information about these modes.
-#
-# A "none" token is logged for requests that
-# triggered "ssl_bump" ACL evaluation matching
-# either a "none" rule or no rules at all.
-#
-# In all other cases, a single dash ("-") is
-# logged.
-#
-# ssl::>sni SSL client SNI sent to Squid. Available only
-# after the peek, stare, or splice SSL bumping
-# actions.
-#
-# If ICAP is enabled, the following code becomes available (as
-# well as ICAP log codes documented with the icap_log option):
-#
-# icap::tt Total ICAP processing time for the HTTP
-# transaction. The timer ticks when ICAP
-# ACLs are checked and when ICAP
-# transaction is in progress.
-#
-# If adaptation is enabled the following three codes become available:
-#
-# adapt::<last_h The header of the last ICAP response or
-# meta-information from the last eCAP
-# transaction related to the HTTP transaction.
-# Like <h, accepts an optional header name
-# argument.
-#
-# adapt::sum_trs Summed adaptation transaction response
-# times recorded as a comma-separated list in
-# the order of transaction start time. Each time
-# value is recorded as an integer number,
-# representing response time of one or more
-# adaptation (ICAP or eCAP) transaction in
-# milliseconds. When a failed transaction is
-# being retried or repeated, its time is not
-# logged individually but added to the
-# replacement (next) transaction. See also:
-# adapt::all_trs.
-#
-# adapt::all_trs All adaptation transaction response times.
-# Same as adaptation_strs but response times of
-# individual transactions are never added
-# together. Instead, all transaction response
-# times are recorded individually.
-#
-# You can prefix adapt::*_trs format codes with adaptation
-# service name in curly braces to record response time(s) specific
-# to that service. For example: %{my_service}adapt::sum_trs
-#
-# If SSL is enabled, the following formating codes become available:
-#
-# %ssl::>cert_subject The Subject field of the received client
-# SSL certificate or a dash ('-') if Squid has
-# received an invalid/malformed certificate or
-# no certificate at all. Consider encoding the
-# logged value because Subject often has spaces.
-#
-# %ssl::>cert_issuer The Issuer field of the received client
-# SSL certificate or a dash ('-') if Squid has
-# received an invalid/malformed certificate or
-# no certificate at all. Consider encoding the
-# logged value because Issuer often has spaces.
-#
-# The default formats available (which do not need re-defining) are:
-#
-#logformat squid %ts.%03tu %6tr %>a %Ss/%03>Hs %<st %rm %ru %[un %Sh/%<a %mt
-#logformat common %>a %[ui %[un [%tl] "%rm %ru HTTP/%rv" %>Hs %<st %Ss:%Sh
-#logformat combined %>a %[ui %[un [%tl] "%rm %ru HTTP/%rv" %>Hs %<st "%{Referer}>h" "%{User-Agent}>h" %Ss:%Sh
-#logformat referrer %ts.%03tu %>a %{Referer}>h %ru
-#logformat useragent %>a [%tl] "%{User-Agent}>h"
-#
-# NOTE: When the log_mime_hdrs directive is set to ON.
-# The squid, common and combined formats have a safely encoded copy
-# of the mime headers appended to each line within a pair of brackets.
-#
-# NOTE: The common and combined formats are not quite true to the Apache definition.
-# The logs from Squid contain an extra status and hierarchy code appended.
-#
-#Default:
-# The format definitions squid, common, combined, referrer, useragent are built in.
-
-# TAG: access_log
-# Configures whether and how Squid logs HTTP and ICP transactions.
-# If access logging is enabled, a single line is logged for every
-# matching HTTP or ICP request. The recommended directive formats are:
-#
-# access_log <module>:<place> [option ...] [acl acl ...]
-# access_log none [acl acl ...]
-#
-# The following directive format is accepted but may be deprecated:
-# access_log <module>:<place> [<logformat name> [acl acl ...]]
-#
-# In most cases, the first ACL name must not contain the '=' character
-# and should not be equal to an existing logformat name. You can always
-# start with an 'all' ACL to work around those restrictions.
-#
-# Will log to the specified module:place using the specified format (which
-# must be defined in a logformat directive) those entries which match
-# ALL the acl's specified (which must be defined in acl clauses).
-# If no acl is specified, all requests will be logged to this destination.
-#
-# ===== Available options for the recommended directive format =====
-#
-# logformat=name Names log line format (either built-in or
-# defined by a logformat directive). Defaults
-# to 'squid'.
-#
-# buffer-size=64KB Defines approximate buffering limit for log
-# records (see buffered_logs). Squid should not
-# keep more than the specified size and, hence,
-# should flush records before the buffer becomes
-# full to avoid overflows under normal
-# conditions (the exact flushing algorithm is
-# module-dependent though). The on-error option
-# controls overflow handling.
-#
-# on-error=die|drop Defines action on unrecoverable errors. The
-# 'drop' action ignores (i.e., does not log)
-# affected log records. The default 'die' action
-# kills the affected worker. The drop action
-# support has not been tested for modules other
-# than tcp.
-#
-# ===== Modules Currently available =====
-#
-# none Do not log any requests matching these ACL.
-# Do not specify Place or logformat name.
-#
-# stdio Write each log line to disk immediately at the completion of
-# each request.
-# Place: the filename and path to be written.
-#
-# daemon Very similar to stdio. But instead of writing to disk the log
-# line is passed to a daemon helper for asychronous handling instead.
-# Place: varies depending on the daemon.
-#
-# log_file_daemon Place: the file name and path to be written.
-#
-# syslog To log each request via syslog facility.
-# Place: The syslog facility and priority level for these entries.
-# Place Format: facility.priority
-#
-# where facility could be any of:
-# authpriv, daemon, local0 ... local7 or user.
-#
-# And priority could be any of:
-# err, warning, notice, info, debug.
-#
-# udp To send each log line as text data to a UDP receiver.
-# Place: The destination host name or IP and port.
-# Place Format: //host:port
-#
-# tcp To send each log line as text data to a TCP receiver.
-# Lines may be accumulated before sending (see buffered_logs).
-# Place: The destination host name or IP and port.
-# Place Format: //host:port
-#
-# Default:
-# access_log daemon:/var/log/squid/access.log squid
-#Default:
-# access_log daemon:/var/log/squid/access.log squid
-
-# TAG: icap_log
-# ICAP log files record ICAP transaction summaries, one line per
-# transaction.
-#
-# The icap_log option format is:
-# icap_log <filepath> [<logformat name> [acl acl ...]]
-# icap_log none [acl acl ...]]
-#
-# Please see access_log option documentation for details. The two
-# kinds of logs share the overall configuration approach and many
-# features.
-#
-# ICAP processing of a single HTTP message or transaction may
-# require multiple ICAP transactions. In such cases, multiple
-# ICAP transaction log lines will correspond to a single access
-# log line.
-#
-# ICAP log supports many access.log logformat %codes. In ICAP context,
-# HTTP message-related %codes are applied to the HTTP message embedded
-# in an ICAP message. Logformat "%http::>..." codes are used for HTTP
-# messages embedded in ICAP requests while "%http::<..." codes are used
-# for HTTP messages embedded in ICAP responses. For example:
-#
-# http::>h To-be-adapted HTTP message headers sent by Squid to
-# the ICAP service. For REQMOD transactions, these are
-# HTTP request headers. For RESPMOD, these are HTTP
-# response headers, but Squid currently cannot log them
-# (i.e., %http::>h will expand to "-" for RESPMOD).
-#
-# http::<h Adapted HTTP message headers sent by the ICAP
-# service to Squid (i.e., HTTP request headers in regular
-# REQMOD; HTTP response headers in RESPMOD and during
-# request satisfaction in REQMOD).
-#
-# ICAP OPTIONS transactions do not embed HTTP messages.
-#
-# Several logformat codes below deal with ICAP message bodies. An ICAP
-# message body, if any, typically includes a complete HTTP message
-# (required HTTP headers plus optional HTTP message body). When
-# computing HTTP message body size for these logformat codes, Squid
-# either includes or excludes chunked encoding overheads; see
-# code-specific documentation for details.
-#
-# For Secure ICAP services, all size-related information is currently
-# computed before/after TLS encryption/decryption, as if TLS was not
-# in use at all.
-#
-# The following format codes are also available for ICAP logs:
-#
-# icap::<A ICAP server IP address. Similar to <A.
-#
-# icap::<service_name ICAP service name from the icap_service
-# option in Squid configuration file.
-#
-# icap::ru ICAP Request-URI. Similar to ru.
-#
-# icap::rm ICAP request method (REQMOD, RESPMOD, or
-# OPTIONS). Similar to existing rm.
-#
-# icap::>st The total size of the ICAP request sent to the ICAP
-# server (ICAP headers + ICAP body), including chunking
-# metadata (if any).
-#
-# icap::<st The total size of the ICAP response received from the
-# ICAP server (ICAP headers + ICAP body), including
-# chunking metadata (if any).
-#
-# icap::<bs The size of the ICAP response body received from the
-# ICAP server, excluding chunking metadata (if any).
-#
-# icap::tr Transaction response time (in
-# milliseconds). The timer starts when
-# the ICAP transaction is created and
-# stops when the transaction is completed.
-# Similar to tr.
-#
-# icap::tio Transaction I/O time (in milliseconds). The
-# timer starts when the first ICAP request
-# byte is scheduled for sending. The timers
-# stops when the last byte of the ICAP response
-# is received.
-#
-# icap::to Transaction outcome: ICAP_ERR* for all
-# transaction errors, ICAP_OPT for OPTION
-# transactions, ICAP_ECHO for 204
-# responses, ICAP_MOD for message
-# modification, and ICAP_SAT for request
-# satisfaction. Similar to Ss.
-#
-# icap::Hs ICAP response status code. Similar to Hs.
-#
-# icap::>h ICAP request header(s). Similar to >h.
-#
-# icap::<h ICAP response header(s). Similar to <h.
-#
-# The default ICAP log format, which can be used without an explicit
-# definition, is called icap_squid:
-#
-#logformat icap_squid %ts.%03tu %6icap::tr %>A %icap::to/%03icap::Hs %icap::<st %icap::rm %icap::ru %un -/%icap::<A -
-#
-# See also: logformat and %adapt::<last_h
-#Default:
-# none
-
-# TAG: logfile_daemon
-# Specify the path to the logfile-writing daemon. This daemon is
-# used to write the access and store logs, if configured.
-#
-# Squid sends a number of commands to the log daemon:
-# L<data>\n - logfile data
-# R\n - rotate file
-# T\n - truncate file
-# O\n - reopen file
-# F\n - flush file
-# r<n>\n - set rotate count to <n>
-# b<n>\n - 1 = buffer output, 0 = don't buffer output
-#
-# No responses is expected.
-#Default:
-# logfile_daemon /usr/lib/squid/log_file_daemon
-
-# TAG: stats_collection allow|deny acl acl...
-# This options allows you to control which requests gets accounted
-# in performance counters.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# Allow logging for all transactions.
-
-# TAG: cache_store_log
-# Logs the activities of the storage manager. Shows which
-# objects are ejected from the cache, and which objects are
-# saved and for how long.
-# There are not really utilities to analyze this data, so you can safely
-# disable it (the default).
-#
-# Store log uses modular logging outputs. See access_log for the list
-# of modules supported.
-#
-# Example:
-# cache_store_log stdio:/var/log/squid/store.log
-# cache_store_log daemon:/var/log/squid/store.log
-#Default:
-# none
-
-# TAG: cache_swap_state
-# Location for the cache "swap.state" file. This index file holds
-# the metadata of objects saved on disk. It is used to rebuild
-# the cache during startup. Normally this file resides in each
-# 'cache_dir' directory, but you may specify an alternate
-# pathname here. Note you must give a full filename, not just
-# a directory. Since this is the index for the whole object
-# list you CANNOT periodically rotate it!
-#
-# If %s can be used in the file name it will be replaced with a
-# a representation of the cache_dir name where each / is replaced
-# with '.'. This is needed to allow adding/removing cache_dir
-# lines when cache_swap_log is being used.
-#
-# If have more than one 'cache_dir', and %s is not used in the name
-# these swap logs will have names such as:
-#
-# cache_swap_log.00
-# cache_swap_log.01
-# cache_swap_log.02
-#
-# The numbered extension (which is added automatically)
-# corresponds to the order of the 'cache_dir' lines in this
-# configuration file. If you change the order of the 'cache_dir'
-# lines in this file, these index files will NOT correspond to
-# the correct 'cache_dir' entry (unless you manually rename
-# them). We recommend you do NOT use this option. It is
-# better to keep these index files in each 'cache_dir' directory.
-#Default:
-# Store the journal inside its cache_dir
-
-# TAG: logfile_rotate
-# Specifies the number of logfile rotations to make when you
-# type 'squid -k rotate'. The default is 10, which will rotate
-# with extensions 0 through 9. Setting logfile_rotate to 0 will
-# disable the file name rotation, but the logfiles are still closed
-# and re-opened. This will enable you to rename the logfiles
-# yourself just before sending the rotate signal.
-#
-# Note, the 'squid -k rotate' command normally sends a USR1
-# signal to the running squid process. In certain situations
-# (e.g. on Linux with Async I/O), USR1 is used for other
-# purposes, so -k rotate uses another signal. It is best to get
-# in the habit of using 'squid -k rotate' instead of 'kill -USR1
-# <pid>'.
-#
-# Note, from Squid-3.1 this option is only a default for cache.log,
-# that log can be rotated separately by using debug_options.
-#
-# Note2, for Debian/Linux the default of logfile_rotate is
-# zero, since it includes external logfile-rotation methods.
-#Default:
-# logfile_rotate 0
-
-# TAG: mime_table
-# Path to Squid's icon configuration file.
-#
-# You shouldn't need to change this, but the default file contains
-# examples and formatting information if you do.
-#Default:
-# mime_table /usr/share/squid/mime.conf
-
-# TAG: log_mime_hdrs on|off
-# The Cache can record both the request and the response MIME
-# headers for each HTTP transaction. The headers are encoded
-# safely and will appear as two bracketed fields at the end of
-# the access log (for either the native or httpd-emulated log
-# formats). To enable this logging set log_mime_hdrs to 'on'.
-#Default:
-# log_mime_hdrs off
-
-# TAG: pid_filename
-# A filename to write the process-id to. To disable, enter "none".
-#Default:
-# pid_filename /var/run/squid.pid
-
-# TAG: client_netmask
-# A netmask for client addresses in logfiles and cachemgr output.
-# Change this to protect the privacy of your cache clients.
-# A netmask of 255.255.255.0 will log all IP's in that range with
-# the last digit set to '0'.
-#Default:
-# Log full client IP address
-
-# TAG: strip_query_terms
-# By default, Squid strips query terms from requested URLs before
-# logging. This protects your user's privacy and reduces log size.
-#
-# When investigating HIT/MISS or other caching behaviour you
-# will need to disable this to see the full URL used by Squid.
-#Default:
-# strip_query_terms on
-
-# TAG: buffered_logs on|off
-# Whether to write/send access_log records ASAP or accumulate them and
-# then write/send them in larger chunks. Buffering may improve
-# performance because it decreases the number of I/Os. However,
-# buffering increases the delay before log records become available to
-# the final recipient (e.g., a disk file or logging daemon) and,
-# hence, increases the risk of log records loss.
-#
-# Note that even when buffered_logs are off, Squid may have to buffer
-# records if it cannot write/send them immediately due to pending I/Os
-# (e.g., the I/O writing the previous log record) or connectivity loss.
-#
-# Currently honored by 'daemon' and 'tcp' access_log modules only.
-#Default:
-# buffered_logs off
-
-# TAG: netdb_filename
-# Where Squid stores it's netdb journal.
-# When enabled this journal preserves netdb state between restarts.
-#
-# To disable, enter "none".
-#Default:
-# netdb_filename stdio:/var/log/squid/netdb.state
-
-# OPTIONS FOR TROUBLESHOOTING
-# -----------------------------------------------------------------------------
-
-# TAG: cache_log
-# Squid administrative logging file.
-#
-# This is where general information about Squid behavior goes. You can
-# increase the amount of data logged to this file and how often it is
-# rotated with "debug_options"
-#Default:
-# cache_log /var/log/squid/cache.log
-
-# TAG: debug_options
-# Logging options are set as section,level where each source file
-# is assigned a unique section. Lower levels result in less
-# output, Full debugging (level 9) can result in a very large
-# log file, so be careful.
-#
-# The magic word "ALL" sets debugging levels for all sections.
-# The default is to run with "ALL,1" to record important warnings.
-#
-# The rotate=N option can be used to keep more or less of these logs
-# than would otherwise be kept by logfile_rotate.
-# For most uses a single log should be enough to monitor current
-# events affecting Squid.
-#Default:
-# Log all critical and important messages.
-
-# TAG: coredump_dir
-# By default Squid leaves core files in the directory from where
-# it was started. If you set 'coredump_dir' to a directory
-# that exists, Squid will chdir() to that directory at startup
-# and coredump files will be left there.
-#
-#Default:
-# Use the directory from where Squid was started.
-#
-
-# Leave coredumps in the first cache dir
-coredump_dir /var/spool/squid
-
-# OPTIONS FOR FTP GATEWAYING
-# -----------------------------------------------------------------------------
-
-# TAG: ftp_user
-# If you want the anonymous login password to be more informative
-# (and enable the use of picky FTP servers), set this to something
-# reasonable for your domain, like wwwuser@somewhere.net
-#
-# The reason why this is domainless by default is the
-# request can be made on the behalf of a user in any domain,
-# depending on how the cache is used.
-# Some FTP server also validate the email address is valid
-# (for example perl.com).
-#Default:
-# ftp_user Squid@
-
-# TAG: ftp_passive
-# If your firewall does not allow Squid to use passive
-# connections, turn off this option.
-#
-# Use of ftp_epsv_all option requires this to be ON.
-#Default:
-# ftp_passive on
-
-# TAG: ftp_epsv_all
-# FTP Protocol extensions permit the use of a special "EPSV ALL" command.
-#
-# NATs may be able to put the connection on a "fast path" through the
-# translator, as the EPRT command will never be used and therefore,
-# translation of the data portion of the segments will never be needed.
-#
-# When a client only expects to do two-way FTP transfers this may be
-# useful.
-# If squid finds that it must do a three-way FTP transfer after issuing
-# an EPSV ALL command, the FTP session will fail.
-#
-# If you have any doubts about this option do not use it.
-# Squid will nicely attempt all other connection methods.
-#
-# Requires ftp_passive to be ON (default) for any effect.
-#Default:
-# ftp_epsv_all off
-
-# TAG: ftp_epsv
-# FTP Protocol extensions permit the use of a special "EPSV" command.
-#
-# NATs may be able to put the connection on a "fast path" through the
-# translator using EPSV, as the EPRT command will never be used
-# and therefore, translation of the data portion of the segments
-# will never be needed.
-#
-# EPSV is often required to interoperate with FTP servers on IPv6
-# networks. On the other hand, it may break some IPv4 servers.
-#
-# By default, EPSV may try EPSV with any FTP server. To fine tune
-# that decision, you may restrict EPSV to certain clients or servers
-# using ACLs:
-#
-# ftp_epsv allow|deny al1 acl2 ...
-#
-# WARNING: Disabling EPSV may cause problems with external NAT and IPv6.
-#
-# Only fast ACLs are supported.
-# Requires ftp_passive to be ON (default) for any effect.
-#Default:
-# none
-
-# TAG: ftp_eprt
-# FTP Protocol extensions permit the use of a special "EPRT" command.
-#
-# This extension provides a protocol neutral alternative to the
-# IPv4-only PORT command. When supported it enables active FTP data
-# channels over IPv6 and efficient NAT handling.
-#
-# Turning this OFF will prevent EPRT being attempted and will skip
-# straight to using PORT for IPv4 servers.
-#
-# Some devices are known to not handle this extension correctly and
-# may result in crashes. Devices which suport EPRT enough to fail
-# cleanly will result in Squid attempting PORT anyway. This directive
-# should only be disabled when EPRT results in device failures.
-#
-# WARNING: Doing so will convert Squid back to the old behavior with all
-# the related problems with external NAT devices/layers and IPv4-only FTP.
-#Default:
-# ftp_eprt on
-
-# TAG: ftp_sanitycheck
-# For security and data integrity reasons Squid by default performs
-# sanity checks of the addresses of FTP data connections ensure the
-# data connection is to the requested server. If you need to allow
-# FTP connections to servers using another IP address for the data
-# connection turn this off.
-#Default:
-# ftp_sanitycheck on
-
-# TAG: ftp_telnet_protocol
-# The FTP protocol is officially defined to use the telnet protocol
-# as transport channel for the control connection. However, many
-# implementations are broken and does not respect this aspect of
-# the FTP protocol.
-#
-# If you have trouble accessing files with ASCII code 255 in the
-# path or similar problems involving this ASCII code you can
-# try setting this directive to off. If that helps, report to the
-# operator of the FTP server in question that their FTP server
-# is broken and does not follow the FTP standard.
-#Default:
-# ftp_telnet_protocol on
-
-# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
-# -----------------------------------------------------------------------------
-
-# TAG: diskd_program
-# Specify the location of the diskd executable.
-# Note this is only useful if you have compiled in
-# diskd as one of the store io modules.
-#Default:
-# diskd_program /usr/lib/squid/diskd
-
-# TAG: unlinkd_program
-# Specify the location of the executable for file deletion process.
-#Default:
-# unlinkd_program /usr/lib/squid/unlinkd
-
-# TAG: pinger_program
-# Specify the location of the executable for the pinger process.
-#Default:
-# pinger_program /usr/lib/squid/pinger
-
-# TAG: pinger_enable
-# Control whether the pinger is active at run-time.
-# Enables turning ICMP pinger on and off with a simple
-# squid -k reconfigure.
-#Default:
-# pinger_enable on
-
-# OPTIONS FOR URL REWRITING
-# -----------------------------------------------------------------------------
-
-# TAG: url_rewrite_program
-# Specify the location of the executable URL rewriter to use.
-# Since they can perform almost any function there isn't one included.
-#
-# For each requested URL, the rewriter will receive on line with the format
-#
-# [channel-ID <SP>] URL [<SP> extras]<NL>
-#
-# See url_rewrite_extras on how to send "extras" with optional values to
-# the helper.
-# After processing the request the helper must reply using the following format:
-#
-# [channel-ID <SP>] result [<SP> kv-pairs]
-#
-# The result code can be:
-#
-# OK status=30N url="..."
-# Redirect the URL to the one supplied in 'url='.
-# 'status=' is optional and contains the status code to send
-# the client in Squids HTTP response. It must be one of the
-# HTTP redirect status codes: 301, 302, 303, 307, 308.
-# When no status is given Squid will use 302.
-#
-# OK rewrite-url="..."
-# Rewrite the URL to the one supplied in 'rewrite-url='.
-# The new URL is fetched directly by Squid and returned to
-# the client as the response to its request.
-#
-# OK
-# When neither of url= and rewrite-url= are sent Squid does
-# not change the URL.
-#
-# ERR
-# Do not change the URL.
-#
-# BH
-# An internal error occurred in the helper, preventing
-# a result being identified. The 'message=' key name is
-# reserved for delivering a log message.
-#
-#
-# In addition to the above kv-pairs Squid also understands the following
-# optional kv-pairs received from URL rewriters:
-# clt_conn_tag=TAG
-# Associates a TAG with the client TCP connection.
-# The TAG is treated as a regular annotation but persists across
-# future requests on the client connection rather than just the
-# current request. A helper may update the TAG during subsequent
-# requests be returning a new kv-pair.
-#
-# When using the concurrency= option the protocol is changed by
-# introducing a query channel tag in front of the request/response.
-# The query channel tag is a number between 0 and concurrency-1.
-# This value must be echoed back unchanged to Squid as the first part
-# of the response relating to its request.
-#
-# WARNING: URL re-writing ability should be avoided whenever possible.
-# Use the URL redirect form of response instead.
-#
-# Re-write creates a difference in the state held by the client
-# and server. Possibly causing confusion when the server response
-# contains snippets of its view state. Embeded URLs, response
-# and content Location headers, etc. are not re-written by this
-# interface.
-#
-# By default, a URL rewriter is not used.
-#Default:
-# none
-
-# TAG: url_rewrite_children
-# The maximum number of redirector processes to spawn. If you limit
-# it too few Squid will have to wait for them to process a backlog of
-# URLs, slowing it down. If you allow too many they will use RAM
-# and other system resources noticably.
-#
-# The startup= and idle= options allow some measure of skew in your
-# tuning.
-#
-# startup=
-#
-# Sets a minimum of how many processes are to be spawned when Squid
-# starts or reconfigures. When set to zero the first request will
-# cause spawning of the first child process to handle it.
-#
-# Starting too few will cause an initial slowdown in traffic as Squid
-# attempts to simultaneously spawn enough processes to cope.
-#
-# idle=
-#
-# Sets a minimum of how many processes Squid is to try and keep available
-# at all times. When traffic begins to rise above what the existing
-# processes can handle this many more will be spawned up to the maximum
-# configured. A minimum setting of 1 is required.
-#
-# concurrency=
-#
-# The number of requests each redirector helper can handle in
-# parallel. Defaults to 0 which indicates the redirector
-# is a old-style single threaded redirector.
-#
-# When this directive is set to a value >= 1 then the protocol
-# used to communicate with the helper is modified to include
-# an ID in front of the request/response. The ID from the request
-# must be echoed back with the response to that request.
-#Default:
-# url_rewrite_children 20 startup=0 idle=1 concurrency=0
-
-# TAG: url_rewrite_host_header
-# To preserve same-origin security policies in browsers and
-# prevent Host: header forgery by redirectors Squid rewrites
-# any Host: header in redirected requests.
-#
-# If you are running an accelerator this may not be a wanted
-# effect of a redirector. This directive enables you disable
-# Host: alteration in reverse-proxy traffic.
-#
-# WARNING: Entries are cached on the result of the URL rewriting
-# process, so be careful if you have domain-virtual hosts.
-#
-# WARNING: Squid and other software verifies the URL and Host
-# are matching, so be careful not to relay through other proxies
-# or inspecting firewalls with this disabled.
-#Default:
-# url_rewrite_host_header on
-
-# TAG: url_rewrite_access
-# If defined, this access list specifies which requests are
-# sent to the redirector processes.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# Allow, unless rules exist in squid.conf.
-
-# TAG: url_rewrite_bypass
-# When this is 'on', a request will not go through the
-# redirector if all the helpers are busy. If this is 'off'
-# and the redirector queue grows too large, Squid will exit
-# with a FATAL error and ask you to increase the number of
-# redirectors. You should only enable this if the redirectors
-# are not critical to your caching system. If you use
-# redirectors for access control, and you enable this option,
-# users may have access to pages they should not
-# be allowed to request.
-#Default:
-# url_rewrite_bypass off
-
-# TAG: url_rewrite_extras
-# Specifies a string to be append to request line format for the
-# rewriter helper. "Quoted" format values may contain spaces and
-# logformat %macros. In theory, any logformat %macro can be used.
-# In practice, a %macro expands as a dash (-) if the helper request is
-# sent before the required macro information is available to Squid.
-#Default:
-# url_rewrite_extras "%>a/%>A %un %>rm myip=%la myport=%lp"
-
-# OPTIONS FOR STORE ID
-# -----------------------------------------------------------------------------
-
-# TAG: store_id_program
-# Specify the location of the executable StoreID helper to use.
-# Since they can perform almost any function there isn't one included.
-#
-# For each requested URL, the helper will receive one line with the format
-#
-# [channel-ID <SP>] URL [<SP> extras]<NL>
-#
-#
-# After processing the request the helper must reply using the following format:
-#
-# [channel-ID <SP>] result [<SP> kv-pairs]
-#
-# The result code can be:
-#
-# OK store-id="..."
-# Use the StoreID supplied in 'store-id='.
-#
-# ERR
-# The default is to use HTTP request URL as the store ID.
-#
-# BH
-# An internal error occured in the helper, preventing
-# a result being identified.
-#
-# In addition to the above kv-pairs Squid also understands the following
-# optional kv-pairs received from URL rewriters:
-# clt_conn_tag=TAG
-# Associates a TAG with the client TCP connection.
-# Please see url_rewrite_program related documentation for this
-# kv-pair
-#
-# Helper programs should be prepared to receive and possibly ignore
-# additional whitespace-separated tokens on each input line.
-#
-# When using the concurrency= option the protocol is changed by
-# introducing a query channel tag in front of the request/response.
-# The query channel tag is a number between 0 and concurrency-1.
-# This value must be echoed back unchanged to Squid as the first part
-# of the response relating to its request.
-#
-# NOTE: when using StoreID refresh_pattern will apply to the StoreID
-# returned from the helper and not the URL.
-#
-# WARNING: Wrong StoreID value returned by a careless helper may result
-# in the wrong cached response returned to the user.
-#
-# By default, a StoreID helper is not used.
-#Default:
-# none
-
-# TAG: store_id_extras
-# Specifies a string to be append to request line format for the
-# StoreId helper. "Quoted" format values may contain spaces and
-# logformat %macros. In theory, any logformat %macro can be used.
-# In practice, a %macro expands as a dash (-) if the helper request is
-# sent before the required macro information is available to Squid.
-#Default:
-# store_id_extras "%>a/%>A %un %>rm myip=%la myport=%lp"
-
-# TAG: store_id_children
-# The maximum number of StoreID helper processes to spawn. If you limit
-# it too few Squid will have to wait for them to process a backlog of
-# requests, slowing it down. If you allow too many they will use RAM
-# and other system resources noticably.
-#
-# The startup= and idle= options allow some measure of skew in your
-# tuning.
-#
-# startup=
-#
-# Sets a minimum of how many processes are to be spawned when Squid
-# starts or reconfigures. When set to zero the first request will
-# cause spawning of the first child process to handle it.
-#
-# Starting too few will cause an initial slowdown in traffic as Squid
-# attempts to simultaneously spawn enough processes to cope.
-#
-# idle=
-#
-# Sets a minimum of how many processes Squid is to try and keep available
-# at all times. When traffic begins to rise above what the existing
-# processes can handle this many more will be spawned up to the maximum
-# configured. A minimum setting of 1 is required.
-#
-# concurrency=
-#
-# The number of requests each storeID helper can handle in
-# parallel. Defaults to 0 which indicates the helper
-# is a old-style single threaded program.
-#
-# When this directive is set to a value >= 1 then the protocol
-# used to communicate with the helper is modified to include
-# an ID in front of the request/response. The ID from the request
-# must be echoed back with the response to that request.
-#Default:
-# store_id_children 20 startup=0 idle=1 concurrency=0
-
-# TAG: store_id_access
-# If defined, this access list specifies which requests are
-# sent to the StoreID processes. By default all requests
-# are sent.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# Allow, unless rules exist in squid.conf.
-
-# TAG: store_id_bypass
-# When this is 'on', a request will not go through the
-# helper if all helpers are busy. If this is 'off'
-# and the helper queue grows too large, Squid will exit
-# with a FATAL error and ask you to increase the number of
-# helpers. You should only enable this if the helperss
-# are not critical to your caching system. If you use
-# helpers for critical caching components, and you enable this
-# option, users may not get objects from cache.
-#Default:
-# store_id_bypass on
-
-# OPTIONS FOR TUNING THE CACHE
-# -----------------------------------------------------------------------------
-
-# TAG: cache
-# Requests denied by this directive will not be served from the cache
-# and their responses will not be stored in the cache. This directive
-# has no effect on other transactions and on already cached responses.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-# This and the two other similar caching directives listed below are
-# checked at different transaction processing stages, have different
-# access to response information, affect different cache operations,
-# and differ in slow ACLs support:
-#
-# * cache: Checked before Squid makes a hit/miss determination.
-# No access to reply information!
-# Denies both serving a hit and storing a miss.
-# Supports both fast and slow ACLs.
-# * send_hit: Checked after a hit was detected.
-# Has access to reply (hit) information.
-# Denies serving a hit only.
-# Supports fast ACLs only.
-# * store_miss: Checked before storing a cachable miss.
-# Has access to reply (miss) information.
-# Denies storing a miss only.
-# Supports fast ACLs only.
-#
-# If you are not sure which of the three directives to use, apply the
-# following decision logic:
-#
-# * If your ACL(s) are of slow type _and_ need response info, redesign.
-# Squid does not support that particular combination at this time.
-# Otherwise:
-# * If your directive ACL(s) are of slow type, use "cache"; and/or
-# * if your directive ACL(s) need no response info, use "cache".
-# Otherwise:
-# * If you do not want the response cached, use store_miss; and/or
-# * if you do not want a hit on a cached response, use send_hit.
-#Default:
-# By default, this directive is unused and has no effect.
-
-# TAG: send_hit
-# Responses denied by this directive will not be served from the cache
-# (but may still be cached, see store_miss). This directive has no
-# effect on the responses it allows and on the cached objects.
-#
-# Please see the "cache" directive for a summary of differences among
-# store_miss, send_hit, and cache directives.
-#
-# Unlike the "cache" directive, send_hit only supports fast acl
-# types. See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-# For example:
-#
-# # apply custom Store ID mapping to some URLs
-# acl MapMe dstdomain .c.example.com
-# store_id_program ...
-# store_id_access allow MapMe
-#
-# # but prevent caching of special responses
-# # such as 302 redirects that cause StoreID loops
-# acl Ordinary http_status 200-299
-# store_miss deny MapMe !Ordinary
-#
-# # and do not serve any previously stored special responses
-# # from the cache (in case they were already cached before
-# # the above store_miss rule was in effect).
-# send_hit deny MapMe !Ordinary
-#Default:
-# By default, this directive is unused and has no effect.
-
-# TAG: store_miss
-# Responses denied by this directive will not be cached (but may still
-# be served from the cache, see send_hit). This directive has no
-# effect on the responses it allows and on the already cached responses.
-#
-# Please see the "cache" directive for a summary of differences among
-# store_miss, send_hit, and cache directives. See the
-# send_hit directive for a usage example.
-#
-# Unlike the "cache" directive, store_miss only supports fast acl
-# types. See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# By default, this directive is unused and has no effect.
-
-# TAG: max_stale time-units
-# This option puts an upper limit on how stale content Squid
-# will serve from the cache if cache validation fails.
-# Can be overriden by the refresh_pattern max-stale option.
-#Default:
-# max_stale 1 week
-
-# TAG: refresh_pattern
-# usage: refresh_pattern [-i] regex min percent max [options]
-#
-# By default, regular expressions are CASE-SENSITIVE. To make
-# them case-insensitive, use the -i option.
-#
-# 'Min' is the time (in minutes) an object without an explicit
-# expiry time should be considered fresh. The recommended
-# value is 0, any higher values may cause dynamic applications
-# to be erroneously cached unless the application designer
-# has taken the appropriate actions.
-#
-# 'Percent' is a percentage of the objects age (time since last
-# modification age) an object without explicit expiry time
-# will be considered fresh.
-#
-# 'Max' is an upper limit on how long objects without an explicit
-# expiry time will be considered fresh.
-#
-# options: override-expire
-# override-lastmod
-# reload-into-ims
-# ignore-reload
-# ignore-no-store
-# ignore-must-revalidate
-# ignore-private
-# ignore-auth
-# max-stale=NN
-# refresh-ims
-# store-stale
-#
-# override-expire enforces min age even if the server
-# sent an explicit expiry time (e.g., with the
-# Expires: header or Cache-Control: max-age). Doing this
-# VIOLATES the HTTP standard. Enabling this feature
-# could make you liable for problems which it causes.
-#
-# Note: override-expire does not enforce staleness - it only extends
-# freshness / min. If the server returns a Expires time which
-# is longer than your max time, Squid will still consider
-# the object fresh for that period of time.
-#
-# override-lastmod enforces min age even on objects
-# that were modified recently.
-#
-# reload-into-ims changes a client no-cache or ``reload''
-# request for a cached entry into a conditional request using
-# If-Modified-Since and/or If-None-Match headers, provided the
-# cached entry has a Last-Modified and/or a strong ETag header.
-# Doing this VIOLATES the HTTP standard. Enabling this feature
-# could make you liable for problems which it causes.
-#
-# ignore-reload ignores a client no-cache or ``reload''
-# header. Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which
-# it causes.
-#
-# ignore-no-store ignores any ``Cache-control: no-store''
-# headers received from a server. Doing this VIOLATES
-# the HTTP standard. Enabling this feature could make you
-# liable for problems which it causes.
-#
-# ignore-must-revalidate ignores any ``Cache-Control: must-revalidate``
-# headers received from a server. Doing this VIOLATES
-# the HTTP standard. Enabling this feature could make you
-# liable for problems which it causes.
-#
-# ignore-private ignores any ``Cache-control: private''
-# headers received from a server. Doing this VIOLATES
-# the HTTP standard. Enabling this feature could make you
-# liable for problems which it causes.
-#
-# ignore-auth caches responses to requests with authorization,
-# as if the originserver had sent ``Cache-control: public''
-# in the response header. Doing this VIOLATES the HTTP standard.
-# Enabling this feature could make you liable for problems which
-# it causes.
-#
-# refresh-ims causes squid to contact the origin server
-# when a client issues an If-Modified-Since request. This
-# ensures that the client will receive an updated version
-# if one is available.
-#
-# store-stale stores responses even if they don't have explicit
-# freshness or a validator (i.e., Last-Modified or an ETag)
-# present, or if they're already stale. By default, Squid will
-# not cache such responses because they usually can't be
-# reused. Note that such responses will be stale by default.
-#
-# max-stale=NN provide a maximum staleness factor. Squid won't
-# serve objects more stale than this even if it failed to
-# validate the object. Default: use the max_stale global limit.
-#
-# Basically a cached object is:
-#
-# FRESH if expire > now, else STALE
-# STALE if age > max
-# FRESH if lm-factor < percent, else STALE
-# FRESH if age < min
-# else STALE
-#
-# The refresh_pattern lines are checked in the order listed here.
-# The first entry which matches is used. If none of the entries
-# match the default will be used.
-#
-# Note, you must uncomment all the default lines if you want
-# to change one. The default setting is only active if none is
-# used.
-#
-#
-
-#
-# Add any of your own refresh_pattern entries above these.
-#
-refresh_pattern ^ftp: 1440 20% 10080
-refresh_pattern ^gopher: 1440 0% 1440
-refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
-refresh_pattern /(|In)Release(|\.gpg)$ 0 0% 0
-refresh_pattern /(Packages|Sources)(|\.gz|\.bz2|\.xz)$ 0 0% 0
-refresh_pattern \.deb$ 129600 100% 129600
-refresh_pattern \.udeb$ 129600 100% 129600
-refresh_pattern \.tar\.(gz|bz2|xz|lzma)$ 129600 100% 129600
-refresh_pattern . 0 20% 4320
-
-# TAG: quick_abort_min (KB)
-#Default:
-# quick_abort_min 16 KB
-
-# TAG: quick_abort_max (KB)
-#Default:
-# quick_abort_max 16 KB
-
-# TAG: quick_abort_pct (percent)
-# The cache by default continues downloading aborted requests
-# which are almost completed (less than 16 KB remaining). This
-# may be undesirable on slow (e.g. SLIP) links and/or very busy
-# caches. Impatient users may tie up file descriptors and
-# bandwidth by repeatedly requesting and immediately aborting
-# downloads.
-#
-# When the user aborts a request, Squid will check the
-# quick_abort values to the amount of data transferred until
-# then.
-#
-# If the transfer has less than 'quick_abort_min' KB remaining,
-# it will finish the retrieval.
-#
-# If the transfer has more than 'quick_abort_max' KB remaining,
-# it will abort the retrieval.
-#
-# If more than 'quick_abort_pct' of the transfer has completed,
-# it will finish the retrieval.
-#
-# If you do not want any retrieval to continue after the client
-# has aborted, set both 'quick_abort_min' and 'quick_abort_max'
-# to '0 KB'.
-#
-# If you want retrievals to always continue if they are being
-# cached set 'quick_abort_min' to '-1 KB'.
-#Default:
-# quick_abort_pct 95
-
-# TAG: read_ahead_gap buffer-size
-# The amount of data the cache will buffer ahead of what has been
-# sent to the client when retrieving an object from another server.
-#Default:
-# read_ahead_gap 16 KB
-
-# TAG: negative_ttl time-units
-# Set the Default Time-to-Live (TTL) for failed requests.
-# Certain types of failures (such as "connection refused" and
-# "404 Not Found") are able to be negatively-cached for a short time.
-# Modern web servers should provide Expires: header, however if they
-# do not this can provide a minimum TTL.
-# The default is not to cache errors with unknown expiry details.
-#
-# Note that this is different from negative caching of DNS lookups.
-#
-# WARNING: Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which it
-# causes.
-#Default:
-# negative_ttl 0 seconds
-
-# TAG: positive_dns_ttl time-units
-# Upper limit on how long Squid will cache positive DNS responses.
-# Default is 6 hours (360 minutes). This directive must be set
-# larger than negative_dns_ttl.
-#Default:
-# positive_dns_ttl 6 hours
-
-# TAG: negative_dns_ttl time-units
-# Time-to-Live (TTL) for negative caching of failed DNS lookups.
-# This also sets the lower cache limit on positive lookups.
-# Minimum value is 1 second, and it is not recommendable to go
-# much below 10 seconds.
-#Default:
-# negative_dns_ttl 1 minutes
-
-# TAG: range_offset_limit size [acl acl...]
-# usage: (size) [units] [[!]aclname]
-#
-# Sets an upper limit on how far (number of bytes) into the file
-# a Range request may be to cause Squid to prefetch the whole file.
-# If beyond this limit, Squid forwards the Range request as it is and
-# the result is NOT cached.
-#
-# This is to stop a far ahead range request (lets say start at 17MB)
-# from making Squid fetch the whole object up to that point before
-# sending anything to the client.
-#
-# Multiple range_offset_limit lines may be specified, and they will
-# be searched from top to bottom on each request until a match is found.
-# The first match found will be used. If no line matches a request, the
-# default limit of 0 bytes will be used.
-#
-# 'size' is the limit specified as a number of units.
-#
-# 'units' specifies whether to use bytes, KB, MB, etc.
-# If no units are specified bytes are assumed.
-#
-# A size of 0 causes Squid to never fetch more than the
-# client requested. (default)
-#
-# A size of 'none' causes Squid to always fetch the object from the
-# beginning so it may cache the result. (2.0 style)
-#
-# 'aclname' is the name of a defined ACL.
-#
-# NP: Using 'none' as the byte value here will override any quick_abort settings
-# that may otherwise apply to the range request. The range request will
-# be fully fetched from start to finish regardless of the client
-# actions. This affects bandwidth usage.
-#Default:
-# none
-
-# TAG: minimum_expiry_time (seconds)
-# The minimum caching time according to (Expires - Date)
-# headers Squid honors if the object can't be revalidated.
-# The default is 60 seconds.
-#
-# In reverse proxy environments it might be desirable to honor
-# shorter object lifetimes. It is most likely better to make
-# your server return a meaningful Last-Modified header however.
-#
-# In ESI environments where page fragments often have short
-# lifetimes, this will often be best set to 0.
-#Default:
-# minimum_expiry_time 60 seconds
-
-# TAG: store_avg_object_size (bytes)
-# Average object size, used to estimate number of objects your
-# cache can hold. The default is 13 KB.
-#
-# This is used to pre-seed the cache index memory allocation to
-# reduce expensive reallocate operations while handling clients
-# traffic. Too-large values may result in memory allocation during
-# peak traffic, too-small values will result in wasted memory.
-#
-# Check the cache manager 'info' report metrics for the real
-# object sizes seen by your Squid before tuning this.
-#Default:
-# store_avg_object_size 13 KB
-
-# TAG: store_objects_per_bucket
-# Target number of objects per bucket in the store hash table.
-# Lowering this value increases the total number of buckets and
-# also the storage maintenance rate. The default is 20.
-#Default:
-# store_objects_per_bucket 20
-
-# HTTP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: request_header_max_size (KB)
-# This specifies the maximum size for HTTP headers in a request.
-# Request headers are usually relatively small (about 512 bytes).
-# Placing a limit on the request header size will catch certain
-# bugs (for example with persistent connections) and possibly
-# buffer-overflow or denial-of-service attacks.
-#Default:
-# request_header_max_size 64 KB
-
-# TAG: reply_header_max_size (KB)
-# This specifies the maximum size for HTTP headers in a reply.
-# Reply headers are usually relatively small (about 512 bytes).
-# Placing a limit on the reply header size will catch certain
-# bugs (for example with persistent connections) and possibly
-# buffer-overflow or denial-of-service attacks.
-#Default:
-# reply_header_max_size 64 KB
-
-# TAG: request_body_max_size (bytes)
-# This specifies the maximum size for an HTTP request body.
-# In other words, the maximum size of a PUT/POST request.
-# A user who attempts to send a request with a body larger
-# than this limit receives an "Invalid Request" error message.
-# If you set this parameter to a zero (the default), there will
-# be no limit imposed.
-#
-# See also client_request_buffer_max_size for an alternative
-# limitation on client uploads which can be configured.
-#Default:
-# No limit.
-
-# TAG: client_request_buffer_max_size (bytes)
-# This specifies the maximum buffer size of a client request.
-# It prevents squid eating too much memory when somebody uploads
-# a large file.
-#Default:
-# client_request_buffer_max_size 512 KB
-
-# TAG: broken_posts
-# A list of ACL elements which, if matched, causes Squid to send
-# an extra CRLF pair after the body of a PUT/POST request.
-#
-# Some HTTP servers has broken implementations of PUT/POST,
-# and rely on an extra CRLF pair sent by some WWW clients.
-#
-# Quote from RFC2616 section 4.1 on this matter:
-#
-# Note: certain buggy HTTP/1.0 client implementations generate an
-# extra CRLF's after a POST request. To restate what is explicitly
-# forbidden by the BNF, an HTTP/1.1 client must not preface or follow
-# a request with an extra CRLF.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-#Example:
-# acl buggy_server url_regex ^http://....
-# broken_posts allow buggy_server
-#Default:
-# Obey RFC 2616.
-
-# TAG: adaptation_uses_indirect_client on|off
-# Controls whether the indirect client IP address (instead of the direct
-# client IP address) is passed to adaptation services.
-#
-# See also: follow_x_forwarded_for adaptation_send_client_ip
-#Default:
-# adaptation_uses_indirect_client on
-
-# TAG: via on|off
-# If set (default), Squid will include a Via header in requests and
-# replies as required by RFC2616.
-#Default:
-# via on
-
-# TAG: ie_refresh on|off
-# Microsoft Internet Explorer up until version 5.5 Service
-# Pack 1 has an issue with transparent proxies, wherein it
-# is impossible to force a refresh. Turning this on provides
-# a partial fix to the problem, by causing all IMS-REFRESH
-# requests from older IE versions to check the origin server
-# for fresh content. This reduces hit ratio by some amount
-# (~10% in my experience), but allows users to actually get
-# fresh content when they want it. Note because Squid
-# cannot tell if the user is using 5.5 or 5.5SP1, the behavior
-# of 5.5 is unchanged from old versions of Squid (i.e. a
-# forced refresh is impossible). Newer versions of IE will,
-# hopefully, continue to have the new behavior and will be
-# handled based on that assumption. This option defaults to
-# the old Squid behavior, which is better for hit ratios but
-# worse for clients using IE, if they need to be able to
-# force fresh content.
-#Default:
-# ie_refresh off
-
-# TAG: vary_ignore_expire on|off
-# Many HTTP servers supporting Vary gives such objects
-# immediate expiry time with no cache-control header
-# when requested by a HTTP/1.0 client. This option
-# enables Squid to ignore such expiry times until
-# HTTP/1.1 is fully implemented.
-#
-# WARNING: If turned on this may eventually cause some
-# varying objects not intended for caching to get cached.
-#Default:
-# vary_ignore_expire off
-
-# TAG: request_entities
-# Squid defaults to deny GET and HEAD requests with request entities,
-# as the meaning of such requests are undefined in the HTTP standard
-# even if not explicitly forbidden.
-#
-# Set this directive to on if you have clients which insists
-# on sending request entities in GET or HEAD requests. But be warned
-# that there is server software (both proxies and web servers) which
-# can fail to properly process this kind of request which may make you
-# vulnerable to cache pollution attacks if enabled.
-#Default:
-# request_entities off
-
-# TAG: request_header_access
-# Usage: request_header_access header_name allow|deny [!]aclname ...
-#
-# WARNING: Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which it
-# causes.
-#
-# This option replaces the old 'anonymize_headers' and the
-# older 'http_anonymizer' option with something that is much
-# more configurable. A list of ACLs for each header name allows
-# removal of specific header fields under specific conditions.
-#
-# This option only applies to outgoing HTTP request headers (i.e.,
-# headers sent by Squid to the next HTTP hop such as a cache peer
-# or an origin server). The option has no effect during cache hit
-# detection. The equivalent adaptation vectoring point in ICAP
-# terminology is post-cache REQMOD.
-#
-# The option is applied to individual outgoing request header
-# fields. For each request header field F, Squid uses the first
-# qualifying sets of request_header_access rules:
-#
-# 1. Rules with header_name equal to F's name.
-# 2. Rules with header_name 'Other', provided F's name is not
-# on the hard-coded list of commonly used HTTP header names.
-# 3. Rules with header_name 'All'.
-#
-# Within that qualifying rule set, rule ACLs are checked as usual.
-# If ACLs of an "allow" rule match, the header field is allowed to
-# go through as is. If ACLs of a "deny" rule match, the header is
-# removed and request_header_replace is then checked to identify
-# if the removed header has a replacement. If no rules within the
-# set have matching ACLs, the header field is left as is.
-#
-# For example, to achieve the same behavior as the old
-# 'http_anonymizer standard' option, you should use:
-#
-# request_header_access From deny all
-# request_header_access Referer deny all
-# request_header_access User-Agent deny all
-#
-# Or, to reproduce the old 'http_anonymizer paranoid' feature
-# you should use:
-#
-# request_header_access Authorization allow all
-# request_header_access Proxy-Authorization allow all
-# request_header_access Cache-Control allow all
-# request_header_access Content-Length allow all
-# request_header_access Content-Type allow all
-# request_header_access Date allow all
-# request_header_access Host allow all
-# request_header_access If-Modified-Since allow all
-# request_header_access Pragma allow all
-# request_header_access Accept allow all
-# request_header_access Accept-Charset allow all
-# request_header_access Accept-Encoding allow all
-# request_header_access Accept-Language allow all
-# request_header_access Connection allow all
-# request_header_access All deny all
-#
-# HTTP reply headers are controlled with the reply_header_access directive.
-#
-# By default, all headers are allowed (no anonymizing is performed).
-#Default:
-# No limits.
-
-# TAG: reply_header_access
-# Usage: reply_header_access header_name allow|deny [!]aclname ...
-#
-# WARNING: Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which it
-# causes.
-#
-# This option only applies to reply headers, i.e., from the
-# server to the client.
-#
-# This is the same as request_header_access, but in the other
-# direction. Please see request_header_access for detailed
-# documentation.
-#
-# For example, to achieve the same behavior as the old
-# 'http_anonymizer standard' option, you should use:
-#
-# reply_header_access Server deny all
-# reply_header_access WWW-Authenticate deny all
-# reply_header_access Link deny all
-#
-# Or, to reproduce the old 'http_anonymizer paranoid' feature
-# you should use:
-#
-# reply_header_access Allow allow all
-# reply_header_access WWW-Authenticate allow all
-# reply_header_access Proxy-Authenticate allow all
-# reply_header_access Cache-Control allow all
-# reply_header_access Content-Encoding allow all
-# reply_header_access Content-Length allow all
-# reply_header_access Content-Type allow all
-# reply_header_access Date allow all
-# reply_header_access Expires allow all
-# reply_header_access Last-Modified allow all
-# reply_header_access Location allow all
-# reply_header_access Pragma allow all
-# reply_header_access Content-Language allow all
-# reply_header_access Retry-After allow all
-# reply_header_access Title allow all
-# reply_header_access Content-Disposition allow all
-# reply_header_access Connection allow all
-# reply_header_access All deny all
-#
-# HTTP request headers are controlled with the request_header_access directive.
-#
-# By default, all headers are allowed (no anonymizing is
-# performed).
-#Default:
-# No limits.
-
-# TAG: request_header_replace
-# Usage: request_header_replace header_name message
-# Example: request_header_replace User-Agent Nutscrape/1.0 (CP/M; 8-bit)
-#
-# This option allows you to change the contents of headers
-# denied with request_header_access above, by replacing them
-# with some fixed string.
-#
-# This only applies to request headers, not reply headers.
-#
-# By default, headers are removed if denied.
-#Default:
-# none
-
-# TAG: reply_header_replace
-# Usage: reply_header_replace header_name message
-# Example: reply_header_replace Server Foo/1.0
-#
-# This option allows you to change the contents of headers
-# denied with reply_header_access above, by replacing them
-# with some fixed string.
-#
-# This only applies to reply headers, not request headers.
-#
-# By default, headers are removed if denied.
-#Default:
-# none
-
-# TAG: request_header_add
-# Usage: request_header_add field-name field-value acl1 [acl2] ...
-# Example: request_header_add X-Client-CA "CA=%ssl::>cert_issuer" all
-#
-# This option adds header fields to outgoing HTTP requests (i.e.,
-# request headers sent by Squid to the next HTTP hop such as a
-# cache peer or an origin server). The option has no effect during
-# cache hit detection. The equivalent adaptation vectoring point
-# in ICAP terminology is post-cache REQMOD.
-#
-# Field-name is a token specifying an HTTP header name. If a
-# standard HTTP header name is used, Squid does not check whether
-# the new header conflicts with any existing headers or violates
-# HTTP rules. If the request to be modified already contains a
-# field with the same name, the old field is preserved but the
-# header field values are not merged.
-#
-# Field-value is either a token or a quoted string. If quoted
-# string format is used, then the surrounding quotes are removed
-# while escape sequences and %macros are processed.
-#
-# In theory, all of the logformat codes can be used as %macros.
-# However, unlike logging (which happens at the very end of
-# transaction lifetime), the transaction may not yet have enough
-# information to expand a macro when the new header value is needed.
-# And some information may already be available to Squid but not yet
-# committed where the macro expansion code can access it (report
-# such instances!). The macro will be expanded into a single dash
-# ('-') in such cases. Not all macros have been tested.
-#
-# One or more Squid ACLs may be specified to restrict header
-# injection to matching requests. As always in squid.conf, all
-# ACLs in an option ACL list must be satisfied for the insertion
-# to happen. The request_header_add option supports fast ACLs
-# only.
-#Default:
-# none
-
-# TAG: note
-# This option used to log custom information about the master
-# transaction. For example, an admin may configure Squid to log
-# which "user group" the transaction belongs to, where "user group"
-# will be determined based on a set of ACLs and not [just]
-# authentication information.
-# Values of key/value pairs can be logged using %{key}note macros:
-#
-# note key value acl ...
-# logformat myFormat ... %{key}note ...
-#Default:
-# none
-
-# TAG: relaxed_header_parser on|off|warn
-# In the default "on" setting Squid accepts certain forms
-# of non-compliant HTTP messages where it is unambiguous
-# what the sending application intended even if the message
-# is not correctly formatted. The messages is then normalized
-# to the correct form when forwarded by Squid.
-#
-# If set to "warn" then a warning will be emitted in cache.log
-# each time such HTTP error is encountered.
-#
-# If set to "off" then such HTTP errors will cause the request
-# or response to be rejected.
-#Default:
-# relaxed_header_parser on
-
-# TAG: collapsed_forwarding (on|off)
-# When enabled, instead of forwarding each concurrent request for
-# the same URL, Squid just sends the first of them. The other, so
-# called "collapsed" requests, wait for the response to the first
-# request and, if it happens to be cachable, use that response.
-# Here, "concurrent requests" means "received after the first
-# request headers were parsed and before the corresponding response
-# headers were parsed".
-#
-# This feature is disabled by default: enabling collapsed
-# forwarding needlessly delays forwarding requests that look
-# cachable (when they are collapsed) but then need to be forwarded
-# individually anyway because they end up being for uncachable
-# content. However, in some cases, such as acceleration of highly
-# cachable content with periodic or grouped expiration times, the
-# gains from collapsing [large volumes of simultaneous refresh
-# requests] outweigh losses from such delays.
-#
-# Squid collapses two kinds of requests: regular client requests
-# received on one of the listening ports and internal "cache
-# revalidation" requests which are triggered by those regular
-# requests hitting a stale cached object. Revalidation collapsing
-# is currently disabled for Squid instances containing SMP-aware
-# disk or memory caches and for Vary-controlled cached objects.
-#Default:
-# collapsed_forwarding off
-
-# TIMEOUTS
-# -----------------------------------------------------------------------------
-
-# TAG: forward_timeout time-units
-# This parameter specifies how long Squid should at most attempt in
-# finding a forwarding path for the request before giving up.
-#Default:
-# forward_timeout 4 minutes
-
-# TAG: connect_timeout time-units
-# This parameter specifies how long to wait for the TCP connect to
-# the requested server or peer to complete before Squid should
-# attempt to find another path where to forward the request.
-#Default:
-# connect_timeout 1 minute
-
-# TAG: peer_connect_timeout time-units
-# This parameter specifies how long to wait for a pending TCP
-# connection to a peer cache. The default is 30 seconds. You
-# may also set different timeout values for individual neighbors
-# with the 'connect-timeout' option on a 'cache_peer' line.
-#Default:
-# peer_connect_timeout 30 seconds
-
-# TAG: read_timeout time-units
-# Applied on peer server connections.
-#
-# After each successful read(), the timeout will be extended by this
-# amount. If no data is read again after this amount of time,
-# the request is aborted and logged with ERR_READ_TIMEOUT.
-#
-# The default is 15 minutes.
-#Default:
-# read_timeout 15 minutes
-
-# TAG: write_timeout time-units
-# This timeout is tracked for all connections that have data
-# available for writing and are waiting for the socket to become
-# ready. After each successful write, the timeout is extended by
-# the configured amount. If Squid has data to write but the
-# connection is not ready for the configured duration, the
-# transaction associated with the connection is terminated. The
-# default is 15 minutes.
-#Default:
-# write_timeout 15 minutes
-
-# TAG: request_timeout
-# How long to wait for complete HTTP request headers after initial
-# connection establishment.
-#Default:
-# request_timeout 5 minutes
-
-# TAG: client_idle_pconn_timeout
-# How long to wait for the next HTTP request on a persistent
-# client connection after the previous request completes.
-#Default:
-# client_idle_pconn_timeout 2 minutes
-
-# TAG: ftp_client_idle_timeout
-# How long to wait for an FTP request on a connection to Squid ftp_port.
-# Many FTP clients do not deal with idle connection closures well,
-# necessitating a longer default timeout than client_idle_pconn_timeout
-# used for incoming HTTP requests.
-#Default:
-# ftp_client_idle_timeout 30 minutes
-
-# TAG: client_lifetime time-units
-# The maximum amount of time a client (browser) is allowed to
-# remain connected to the cache process. This protects the Cache
-# from having a lot of sockets (and hence file descriptors) tied up
-# in a CLOSE_WAIT state from remote clients that go away without
-# properly shutting down (either because of a network failure or
-# because of a poor client implementation). The default is one
-# day, 1440 minutes.
-#
-# NOTE: The default value is intended to be much larger than any
-# client would ever need to be connected to your cache. You
-# should probably change client_lifetime only as a last resort.
-# If you seem to have many client connections tying up
-# filedescriptors, we recommend first tuning the read_timeout,
-# request_timeout, persistent_request_timeout and quick_abort values.
-#Default:
-# client_lifetime 1 day
-
-# TAG: half_closed_clients
-# Some clients may shutdown the sending side of their TCP
-# connections, while leaving their receiving sides open. Sometimes,
-# Squid can not tell the difference between a half-closed and a
-# fully-closed TCP connection.
-#
-# By default, Squid will immediately close client connections when
-# read(2) returns "no more data to read."
-#
-# Change this option to 'on' and Squid will keep open connections
-# until a read(2) or write(2) on the socket returns an error.
-# This may show some benefits for reverse proxies. But if not
-# it is recommended to leave OFF.
-#Default:
-# half_closed_clients off
-
-# TAG: server_idle_pconn_timeout
-# Timeout for idle persistent connections to servers and other
-# proxies.
-#Default:
-# server_idle_pconn_timeout 1 minute
-
-# TAG: ident_timeout
-# Maximum time to wait for IDENT lookups to complete.
-#
-# If this is too high, and you enabled IDENT lookups from untrusted
-# users, you might be susceptible to denial-of-service by having
-# many ident requests going at once.
-#Default:
-# ident_timeout 10 seconds
-
-# TAG: shutdown_lifetime time-units
-# When SIGTERM or SIGHUP is received, the cache is put into
-# "shutdown pending" mode until all active sockets are closed.
-# This value is the lifetime to set for all open descriptors
-# during shutdown mode. Any active clients after this many
-# seconds will receive a 'timeout' message.
-#Default:
-# shutdown_lifetime 30 seconds
-
-# ADMINISTRATIVE PARAMETERS
-# -----------------------------------------------------------------------------
-
-# TAG: cache_mgr
-# Email-address of local cache manager who will receive
-# mail if the cache dies. The default is "webmaster".
-#Default:
-# cache_mgr webmaster
-
-# TAG: mail_from
-# From: email-address for mail sent when the cache dies.
-# The default is to use 'squid@unique_hostname'.
-#
-# See also: unique_hostname directive.
-#Default:
-# none
-
-# TAG: mail_program
-# Email program used to send mail if the cache dies.
-# The default is "mail". The specified program must comply
-# with the standard Unix mail syntax:
-# mail-program recipient < mailfile
-#
-# Optional command line options can be specified.
-#Default:
-# mail_program mail
-
-# TAG: cache_effective_user
-# If you start Squid as root, it will change its effective/real
-# UID/GID to the user specified below. The default is to change
-# to UID of proxy.
-# see also; cache_effective_group
-#Default:
-# cache_effective_user proxy
-
-# TAG: cache_effective_group
-# Squid sets the GID to the effective user's default group ID
-# (taken from the password file) and supplementary group list
-# from the groups membership.
-#
-# If you want Squid to run with a specific GID regardless of
-# the group memberships of the effective user then set this
-# to the group (or GID) you want Squid to run as. When set
-# all other group privileges of the effective user are ignored
-# and only this GID is effective. If Squid is not started as
-# root the user starting Squid MUST be member of the specified
-# group.
-#
-# This option is not recommended by the Squid Team.
-# Our preference is for administrators to configure a secure
-# user account for squid with UID/GID matching system policies.
-#Default:
-# Use system group memberships of the cache_effective_user account
-
-# TAG: httpd_suppress_version_string on|off
-# Suppress Squid version string info in HTTP headers and HTML error pages.
-#Default:
-# httpd_suppress_version_string off
-
-# TAG: visible_hostname
-# If you want to present a special hostname in error messages, etc,
-# define this. Otherwise, the return value of gethostname()
-# will be used. If you have multiple caches in a cluster and
-# get errors about IP-forwarding you must set them to have individual
-# names with this setting.
-#Default:
-# Automatically detect the system host name
-
-# TAG: unique_hostname
-# If you want to have multiple machines with the same
-# 'visible_hostname' you must give each machine a different
-# 'unique_hostname' so forwarding loops can be detected.
-#Default:
-# Copy the value from visible_hostname
-
-# TAG: hostname_aliases
-# A list of other DNS names your cache has.
-#Default:
-# none
-
-# TAG: umask
-# Minimum umask which should be enforced while the proxy
-# is running, in addition to the umask set at startup.
-#
-# For a traditional octal representation of umasks, start
-# your value with 0.
-#Default:
-# umask 027
-
-# OPTIONS FOR THE CACHE REGISTRATION SERVICE
-# -----------------------------------------------------------------------------
-#
-# This section contains parameters for the (optional) cache
-# announcement service. This service is provided to help
-# cache administrators locate one another in order to join or
-# create cache hierarchies.
-#
-# An 'announcement' message is sent (via UDP) to the registration
-# service by Squid. By default, the announcement message is NOT
-# SENT unless you enable it with 'announce_period' below.
-#
-# The announcement message includes your hostname, plus the
-# following information from this configuration file:
-#
-# http_port
-# icp_port
-# cache_mgr
-#
-# All current information is processed regularly and made
-# available on the Web at http://www.ircache.net/Cache/Tracker/.
-
-# TAG: announce_period
-# This is how frequently to send cache announcements.
-#
-# To enable announcing your cache, just set an announce period.
-#
-# Example:
-# announce_period 1 day
-#Default:
-# Announcement messages disabled.
-
-# TAG: announce_host
-# Set the hostname where announce registration messages will be sent.
-#
-# See also announce_port and announce_file
-#Default:
-# announce_host tracker.ircache.net
-
-# TAG: announce_file
-# The contents of this file will be included in the announce
-# registration messages.
-#Default:
-# none
-
-# TAG: announce_port
-# Set the port where announce registration messages will be sent.
-#
-# See also announce_host and announce_file
-#Default:
-# announce_port 3131
-
-# HTTPD-ACCELERATOR OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: httpd_accel_surrogate_id
-# Surrogates (http://www.esi.org/architecture_spec_1.0.html)
-# need an identification token to allow control targeting. Because
-# a farm of surrogates may all perform the same tasks, they may share
-# an identification token.
-#Default:
-# visible_hostname is used if no specific ID is set.
-
-# TAG: http_accel_surrogate_remote on|off
-# Remote surrogates (such as those in a CDN) honour the header
-# "Surrogate-Control: no-store-remote".
-#
-# Set this to on to have squid behave as a remote surrogate.
-#Default:
-# http_accel_surrogate_remote off
-
-# TAG: esi_parser libxml2|expat|custom
-# ESI markup is not strictly XML compatible. The custom ESI parser
-# will give higher performance, but cannot handle non ASCII character
-# encodings.
-#Default:
-# esi_parser custom
-
-# DELAY POOL PARAMETERS
-# -----------------------------------------------------------------------------
-
-# TAG: delay_pools
-# This represents the number of delay pools to be used. For example,
-# if you have one class 2 delay pool and one class 3 delays pool, you
-# have a total of 2 delay pools.
-#
-# See also delay_parameters, delay_class, delay_access for pool
-# configuration details.
-#Default:
-# delay_pools 0
-
-# TAG: delay_class
-# This defines the class of each delay pool. There must be exactly one
-# delay_class line for each delay pool. For example, to define two
-# delay pools, one of class 2 and one of class 3, the settings above
-# and here would be:
-#
-# Example:
-# delay_pools 4 # 4 delay pools
-# delay_class 1 2 # pool 1 is a class 2 pool
-# delay_class 2 3 # pool 2 is a class 3 pool
-# delay_class 3 4 # pool 3 is a class 4 pool
-# delay_class 4 5 # pool 4 is a class 5 pool
-#
-# The delay pool classes are:
-#
-# class 1 Everything is limited by a single aggregate
-# bucket.
-#
-# class 2 Everything is limited by a single aggregate
-# bucket as well as an "individual" bucket chosen
-# from bits 25 through 32 of the IPv4 address.
-#
-# class 3 Everything is limited by a single aggregate
-# bucket as well as a "network" bucket chosen
-# from bits 17 through 24 of the IP address and a
-# "individual" bucket chosen from bits 17 through
-# 32 of the IPv4 address.
-#
-# class 4 Everything in a class 3 delay pool, with an
-# additional limit on a per user basis. This
-# only takes effect if the username is established
-# in advance - by forcing authentication in your
-# http_access rules.
-#
-# class 5 Requests are grouped according their tag (see
-# external_acl's tag= reply).
-#
-#
-# Each pool also requires a delay_parameters directive to configure the pool size
-# and speed limits used whenever the pool is applied to a request. Along with
-# a set of delay_access directives to determine when it is used.
-#
-# NOTE: If an IP address is a.b.c.d
-# -> bits 25 through 32 are "d"
-# -> bits 17 through 24 are "c"
-# -> bits 17 through 32 are "c * 256 + d"
-#
-# NOTE-2: Due to the use of bitmasks in class 2,3,4 pools they only apply to
-# IPv4 traffic. Class 1 and 5 pools may be used with IPv6 traffic.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-# See also delay_parameters and delay_access.
-#Default:
-# none
-
-# TAG: delay_access
-# This is used to determine which delay pool a request falls into.
-#
-# delay_access is sorted per pool and the matching starts with pool 1,
-# then pool 2, ..., and finally pool N. The first delay pool where the
-# request is allowed is selected for the request. If it does not allow
-# the request to any pool then the request is not delayed (default).
-#
-# For example, if you want some_big_clients in delay
-# pool 1 and lotsa_little_clients in delay pool 2:
-#
-# delay_access 1 allow some_big_clients
-# delay_access 1 deny all
-# delay_access 2 allow lotsa_little_clients
-# delay_access 2 deny all
-# delay_access 3 allow authenticated_clients
-#
-# See also delay_parameters and delay_class.
-#
-#Default:
-# Deny using the pool, unless allow rules exist in squid.conf for the pool.
-
-# TAG: delay_parameters
-# This defines the parameters for a delay pool. Each delay pool has
-# a number of "buckets" associated with it, as explained in the
-# description of delay_class.
-#
-# For a class 1 delay pool, the syntax is:
-# delay_class pool 1
-# delay_parameters pool aggregate
-#
-# For a class 2 delay pool:
-# delay_class pool 2
-# delay_parameters pool aggregate individual
-#
-# For a class 3 delay pool:
-# delay_class pool 3
-# delay_parameters pool aggregate network individual
-#
-# For a class 4 delay pool:
-# delay_class pool 4
-# delay_parameters pool aggregate network individual user
-#
-# For a class 5 delay pool:
-# delay_class pool 5
-# delay_parameters pool tagrate
-#
-# The option variables are:
-#
-# pool a pool number - ie, a number between 1 and the
-# number specified in delay_pools as used in
-# delay_class lines.
-#
-# aggregate the speed limit parameters for the aggregate bucket
-# (class 1, 2, 3).
-#
-# individual the speed limit parameters for the individual
-# buckets (class 2, 3).
-#
-# network the speed limit parameters for the network buckets
-# (class 3).
-#
-# user the speed limit parameters for the user buckets
-# (class 4).
-#
-# tagrate the speed limit parameters for the tag buckets
-# (class 5).
-#
-# A pair of delay parameters is written restore/maximum, where restore is
-# the number of bytes (not bits - modem and network speeds are usually
-# quoted in bits) per second placed into the bucket, and maximum is the
-# maximum number of bytes which can be in the bucket at any time.
-#
-# There must be one delay_parameters line for each delay pool.
-#
-#
-# For example, if delay pool number 1 is a class 2 delay pool as in the
-# above example, and is being used to strictly limit each host to 64Kbit/sec
-# (plus overheads), with no overall limit, the line is:
-#
-# delay_parameters 1 none 8000/8000
-#
-# Note that 8 x 8K Byte/sec -> 64K bit/sec.
-#
-# Note that the word 'none' is used to represent no limit.
-#
-#
-# And, if delay pool number 2 is a class 3 delay pool as in the above
-# example, and you want to limit it to a total of 256Kbit/sec (strict limit)
-# with each 8-bit network permitted 64Kbit/sec (strict limit) and each
-# individual host permitted 4800bit/sec with a bucket maximum size of 64Kbits
-# to permit a decent web page to be downloaded at a decent speed
-# (if the network is not being limited due to overuse) but slow down
-# large downloads more significantly:
-#
-# delay_parameters 2 32000/32000 8000/8000 600/8000
-#
-# Note that 8 x 32K Byte/sec -> 256K bit/sec.
-# 8 x 8K Byte/sec -> 64K bit/sec.
-# 8 x 600 Byte/sec -> 4800 bit/sec.
-#
-#
-# Finally, for a class 4 delay pool as in the example - each user will
-# be limited to 128Kbits/sec no matter how many workstations they are logged into.:
-#
-# delay_parameters 4 32000/32000 8000/8000 600/64000 16000/16000
-#
-#
-# See also delay_class and delay_access.
-#
-#Default:
-# none
-
-# TAG: delay_initial_bucket_level (percent, 0-100)
-# The initial bucket percentage is used to determine how much is put
-# in each bucket when squid starts, is reconfigured, or first notices
-# a host accessing it (in class 2 and class 3, individual hosts and
-# networks only have buckets associated with them once they have been
-# "seen" by squid).
-#Default:
-# delay_initial_bucket_level 50
-
-# CLIENT DELAY POOL PARAMETERS
-# -----------------------------------------------------------------------------
-
-# TAG: client_delay_pools
-# This option specifies the number of client delay pools used. It must
-# preceed other client_delay_* options.
-#
-# Example:
-# client_delay_pools 2
-#
-# See also client_delay_parameters and client_delay_access.
-#Default:
-# client_delay_pools 0
-
-# TAG: client_delay_initial_bucket_level (percent, 0-no_limit)
-# This option determines the initial bucket size as a percentage of
-# max_bucket_size from client_delay_parameters. Buckets are created
-# at the time of the "first" connection from the matching IP. Idle
-# buckets are periodically deleted up.
-#
-# You can specify more than 100 percent but note that such "oversized"
-# buckets are not refilled until their size goes down to max_bucket_size
-# from client_delay_parameters.
-#
-# Example:
-# client_delay_initial_bucket_level 50
-#Default:
-# client_delay_initial_bucket_level 50
-
-# TAG: client_delay_parameters
-#
-# This option configures client-side bandwidth limits using the
-# following format:
-#
-# client_delay_parameters pool speed_limit max_bucket_size
-#
-# pool is an integer ID used for client_delay_access matching.
-#
-# speed_limit is bytes added to the bucket per second.
-#
-# max_bucket_size is the maximum size of a bucket, enforced after any
-# speed_limit additions.
-#
-# Please see the delay_parameters option for more information and
-# examples.
-#
-# Example:
-# client_delay_parameters 1 1024 2048
-# client_delay_parameters 2 51200 16384
-#
-# See also client_delay_access.
-#
-#Default:
-# none
-
-# TAG: client_delay_access
-# This option determines the client-side delay pool for the
-# request:
-#
-# client_delay_access pool_ID allow|deny acl_name
-#
-# All client_delay_access options are checked in their pool ID
-# order, starting with pool 1. The first checked pool with allowed
-# request is selected for the request. If no ACL matches or there
-# are no client_delay_access options, the request bandwidth is not
-# limited.
-#
-# The ACL-selected pool is then used to find the
-# client_delay_parameters for the request. Client-side pools are
-# not used to aggregate clients. Clients are always aggregated
-# based on their source IP addresses (one bucket per source IP).
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-# Additionally, only the client TCP connection details are available.
-# ACLs testing HTTP properties will not work.
-#
-# Please see delay_access for more examples.
-#
-# Example:
-# client_delay_access 1 allow low_rate_network
-# client_delay_access 2 allow vips_network
-#
-#
-# See also client_delay_parameters and client_delay_pools.
-#Default:
-# Deny use of the pool, unless allow rules exist in squid.conf for the pool.
-
-# WCCPv1 AND WCCPv2 CONFIGURATION OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: wccp_router
-# Use this option to define your WCCP ``home'' router for
-# Squid.
-#
-# wccp_router supports a single WCCP(v1) router
-#
-# wccp2_router supports multiple WCCPv2 routers
-#
-# only one of the two may be used at the same time and defines
-# which version of WCCP to use.
-#Default:
-# WCCP disabled.
-
-# TAG: wccp2_router
-# Use this option to define your WCCP ``home'' router for
-# Squid.
-#
-# wccp_router supports a single WCCP(v1) router
-#
-# wccp2_router supports multiple WCCPv2 routers
-#
-# only one of the two may be used at the same time and defines
-# which version of WCCP to use.
-#Default:
-# WCCPv2 disabled.
-
-# TAG: wccp_version
-# This directive is only relevant if you need to set up WCCP(v1)
-# to some very old and end-of-life Cisco routers. In all other
-# setups it must be left unset or at the default setting.
-# It defines an internal version in the WCCP(v1) protocol,
-# with version 4 being the officially documented protocol.
-#
-# According to some users, Cisco IOS 11.2 and earlier only
-# support WCCP version 3. If you're using that or an earlier
-# version of IOS, you may need to change this value to 3, otherwise
-# do not specify this parameter.
-#Default:
-# wccp_version 4
-
-# TAG: wccp2_rebuild_wait
-# If this is enabled Squid will wait for the cache dir rebuild to finish
-# before sending the first wccp2 HereIAm packet
-#Default:
-# wccp2_rebuild_wait on
-
-# TAG: wccp2_forwarding_method
-# WCCP2 allows the setting of forwarding methods between the
-# router/switch and the cache. Valid values are as follows:
-#
-# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
-# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting)
-#
-# Currently (as of IOS 12.4) cisco routers only support GRE.
-# Cisco switches only support the L2 redirect assignment method.
-#Default:
-# wccp2_forwarding_method gre
-
-# TAG: wccp2_return_method
-# WCCP2 allows the setting of return methods between the
-# router/switch and the cache for packets that the cache
-# decides not to handle. Valid values are as follows:
-#
-# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
-# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting)
-#
-# Currently (as of IOS 12.4) cisco routers only support GRE.
-# Cisco switches only support the L2 redirect assignment.
-#
-# If the "ip wccp redirect exclude in" command has been
-# enabled on the cache interface, then it is still safe for
-# the proxy server to use a l2 redirect method even if this
-# option is set to GRE.
-#Default:
-# wccp2_return_method gre
-
-# TAG: wccp2_assignment_method
-# WCCP2 allows the setting of methods to assign the WCCP hash
-# Valid values are as follows:
-#
-# hash - Hash assignment
-# mask - Mask assignment
-#
-# As a general rule, cisco routers support the hash assignment method
-# and cisco switches support the mask assignment method.
-#Default:
-# wccp2_assignment_method hash
-
-# TAG: wccp2_service
-# WCCP2 allows for multiple traffic services. There are two
-# types: "standard" and "dynamic". The standard type defines
-# one service id - http (id 0). The dynamic service ids can be from
-# 51 to 255 inclusive. In order to use a dynamic service id
-# one must define the type of traffic to be redirected; this is done
-# using the wccp2_service_info option.
-#
-# The "standard" type does not require a wccp2_service_info option,
-# just specifying the service id will suffice.
-#
-# MD5 service authentication can be enabled by adding
-# "password=<password>" to the end of this service declaration.
-#
-# Examples:
-#
-# wccp2_service standard 0 # for the 'web-cache' standard service
-# wccp2_service dynamic 80 # a dynamic service type which will be
-# # fleshed out with subsequent options.
-# wccp2_service standard 0 password=foo
-#Default:
-# Use the 'web-cache' standard service.
-
-# TAG: wccp2_service_info
-# Dynamic WCCPv2 services require further information to define the
-# traffic you wish to have diverted.
-#
-# The format is:
-#
-# wccp2_service_info <id> protocol=<protocol> flags=<flag>,<flag>..
-# priority=<priority> ports=<port>,<port>..
-#
-# The relevant WCCPv2 flags:
-# + src_ip_hash, dst_ip_hash
-# + source_port_hash, dst_port_hash
-# + src_ip_alt_hash, dst_ip_alt_hash
-# + src_port_alt_hash, dst_port_alt_hash
-# + ports_source
-#
-# The port list can be one to eight entries.
-#
-# Example:
-#
-# wccp2_service_info 80 protocol=tcp flags=src_ip_hash,ports_source
-# priority=240 ports=80
-#
-# Note: the service id must have been defined by a previous
-# 'wccp2_service dynamic <id>' entry.
-#Default:
-# none
-
-# TAG: wccp2_weight
-# Each cache server gets assigned a set of the destination
-# hash proportional to their weight.
-#Default:
-# wccp2_weight 10000
-
-# TAG: wccp_address
-# Use this option if you require WCCPv2 to use a specific
-# interface address.
-#
-# The default behavior is to not bind to any specific address.
-#Default:
-# Address selected by the operating system.
-
-# TAG: wccp2_address
-# Use this option if you require WCCP to use a specific
-# interface address.
-#
-# The default behavior is to not bind to any specific address.
-#Default:
-# Address selected by the operating system.
-
-# PERSISTENT CONNECTION HANDLING
-# -----------------------------------------------------------------------------
-#
-# Also see "pconn_timeout" in the TIMEOUTS section
-
-# TAG: client_persistent_connections
-# Persistent connection support for clients.
-# Squid uses persistent connections (when allowed). You can use
-# this option to disable persistent connections with clients.
-#Default:
-# client_persistent_connections on
-
-# TAG: server_persistent_connections
-# Persistent connection support for servers.
-# Squid uses persistent connections (when allowed). You can use
-# this option to disable persistent connections with servers.
-#Default:
-# server_persistent_connections on
-
-# TAG: persistent_connection_after_error
-# With this directive the use of persistent connections after
-# HTTP errors can be disabled. Useful if you have clients
-# who fail to handle errors on persistent connections proper.
-#Default:
-# persistent_connection_after_error on
-
-# TAG: detect_broken_pconn
-# Some servers have been found to incorrectly signal the use
-# of HTTP/1.0 persistent connections even on replies not
-# compatible, causing significant delays. This server problem
-# has mostly been seen on redirects.
-#
-# By enabling this directive Squid attempts to detect such
-# broken replies and automatically assume the reply is finished
-# after 10 seconds timeout.
-#Default:
-# detect_broken_pconn off
-
-# CACHE DIGEST OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: digest_generation
-# This controls whether the server will generate a Cache Digest
-# of its contents. By default, Cache Digest generation is
-# enabled if Squid is compiled with --enable-cache-digests defined.
-#Default:
-# digest_generation on
-
-# TAG: digest_bits_per_entry
-# This is the number of bits of the server's Cache Digest which
-# will be associated with the Digest entry for a given HTTP
-# Method and URL (public key) combination. The default is 5.
-#Default:
-# digest_bits_per_entry 5
-
-# TAG: digest_rebuild_period (seconds)
-# This is the wait time between Cache Digest rebuilds.
-#Default:
-# digest_rebuild_period 1 hour
-
-# TAG: digest_rewrite_period (seconds)
-# This is the wait time between Cache Digest writes to
-# disk.
-#Default:
-# digest_rewrite_period 1 hour
-
-# TAG: digest_swapout_chunk_size (bytes)
-# This is the number of bytes of the Cache Digest to write to
-# disk at a time. It defaults to 4096 bytes (4KB), the Squid
-# default swap page.
-#Default:
-# digest_swapout_chunk_size 4096 bytes
-
-# TAG: digest_rebuild_chunk_percentage (percent, 0-100)
-# This is the percentage of the Cache Digest to be scanned at a
-# time. By default it is set to 10% of the Cache Digest.
-#Default:
-# digest_rebuild_chunk_percentage 10
-
-# SNMP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: snmp_port
-# The port number where Squid listens for SNMP requests. To enable
-# SNMP support set this to a suitable port number. Port number
-# 3401 is often used for the Squid SNMP agent. By default it's
-# set to "0" (disabled)
-#
-# Example:
-# snmp_port 3401
-#Default:
-# SNMP disabled.
-
-# TAG: snmp_access
-# Allowing or denying access to the SNMP port.
-#
-# All access to the agent is denied by default.
-# usage:
-#
-# snmp_access allow|deny [!]aclname ...
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-#Example:
-# snmp_access allow snmppublic localhost
-# snmp_access deny all
-#Default:
-# Deny, unless rules exist in squid.conf.
-
-# TAG: snmp_incoming_address
-# Just like 'udp_incoming_address', but for the SNMP port.
-#
-# snmp_incoming_address is used for the SNMP socket receiving
-# messages from SNMP agents.
-#
-# The default snmp_incoming_address is to listen on all
-# available network interfaces.
-#Default:
-# Accept SNMP packets from all machine interfaces.
-
-# TAG: snmp_outgoing_address
-# Just like 'udp_outgoing_address', but for the SNMP port.
-#
-# snmp_outgoing_address is used for SNMP packets returned to SNMP
-# agents.
-#
-# If snmp_outgoing_address is not set it will use the same socket
-# as snmp_incoming_address. Only change this if you want to have
-# SNMP replies sent using another address than where this Squid
-# listens for SNMP queries.
-#
-# NOTE, snmp_incoming_address and snmp_outgoing_address can not have
-# the same value since they both use the same port.
-#Default:
-# Use snmp_incoming_address or an address selected by the operating system.
-
-# ICP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: icp_port
-# The port number where Squid sends and receives ICP queries to
-# and from neighbor caches. The standard UDP port for ICP is 3130.
-#
-# Example:
-# icp_port 3130
-#Default:
-# ICP disabled.
-
-# TAG: htcp_port
-# The port number where Squid sends and receives HTCP queries to
-# and from neighbor caches. To turn it on you want to set it to
-# 4827.
-#
-# Example:
-# htcp_port 4827
-#Default:
-# HTCP disabled.
-
-# TAG: log_icp_queries on|off
-# If set, ICP queries are logged to access.log. You may wish
-# do disable this if your ICP load is VERY high to speed things
-# up or to simplify log analysis.
-#Default:
-# log_icp_queries on
-
-# TAG: udp_incoming_address
-# udp_incoming_address is used for UDP packets received from other
-# caches.
-#
-# The default behavior is to not bind to any specific address.
-#
-# Only change this if you want to have all UDP queries received on
-# a specific interface/address.
-#
-# NOTE: udp_incoming_address is used by the ICP, HTCP, and DNS
-# modules. Altering it will affect all of them in the same manner.
-#
-# see also; udp_outgoing_address
-#
-# NOTE, udp_incoming_address and udp_outgoing_address can not
-# have the same value since they both use the same port.
-#Default:
-# Accept packets from all machine interfaces.
-
-# TAG: udp_outgoing_address
-# udp_outgoing_address is used for UDP packets sent out to other
-# caches.
-#
-# The default behavior is to not bind to any specific address.
-#
-# Instead it will use the same socket as udp_incoming_address.
-# Only change this if you want to have UDP queries sent using another
-# address than where this Squid listens for UDP queries from other
-# caches.
-#
-# NOTE: udp_outgoing_address is used by the ICP, HTCP, and DNS
-# modules. Altering it will affect all of them in the same manner.
-#
-# see also; udp_incoming_address
-#
-# NOTE, udp_incoming_address and udp_outgoing_address can not
-# have the same value since they both use the same port.
-#Default:
-# Use udp_incoming_address or an address selected by the operating system.
-
-# TAG: icp_hit_stale on|off
-# If you want to return ICP_HIT for stale cache objects, set this
-# option to 'on'. If you have sibling relationships with caches
-# in other administrative domains, this should be 'off'. If you only
-# have sibling relationships with caches under your control,
-# it is probably okay to set this to 'on'.
-# If set to 'on', your siblings should use the option "allow-miss"
-# on their cache_peer lines for connecting to you.
-#Default:
-# icp_hit_stale off
-
-# TAG: minimum_direct_hops
-# If using the ICMP pinging stuff, do direct fetches for sites
-# which are no more than this many hops away.
-#Default:
-# minimum_direct_hops 4
-
-# TAG: minimum_direct_rtt (msec)
-# If using the ICMP pinging stuff, do direct fetches for sites
-# which are no more than this many rtt milliseconds away.
-#Default:
-# minimum_direct_rtt 400
-
-# TAG: netdb_low
-# The low water mark for the ICMP measurement database.
-#
-# Note: high watermark controlled by netdb_high directive.
-#
-# These watermarks are counts, not percents. The defaults are
-# (low) 900 and (high) 1000. When the high water mark is
-# reached, database entries will be deleted until the low
-# mark is reached.
-#Default:
-# netdb_low 900
-
-# TAG: netdb_high
-# The high water mark for the ICMP measurement database.
-#
-# Note: low watermark controlled by netdb_low directive.
-#
-# These watermarks are counts, not percents. The defaults are
-# (low) 900 and (high) 1000. When the high water mark is
-# reached, database entries will be deleted until the low
-# mark is reached.
-#Default:
-# netdb_high 1000
-
-# TAG: netdb_ping_period
-# The minimum period for measuring a site. There will be at
-# least this much delay between successive pings to the same
-# network. The default is five minutes.
-#Default:
-# netdb_ping_period 5 minutes
-
-# TAG: query_icmp on|off
-# If you want to ask your peers to include ICMP data in their ICP
-# replies, enable this option.
-#
-# If your peer has configured Squid (during compilation) with
-# '--enable-icmp' that peer will send ICMP pings to origin server
-# sites of the URLs it receives. If you enable this option the
-# ICP replies from that peer will include the ICMP data (if available).
-# Then, when choosing a parent cache, Squid will choose the parent with
-# the minimal RTT to the origin server. When this happens, the
-# hierarchy field of the access.log will be
-# "CLOSEST_PARENT_MISS". This option is off by default.
-#Default:
-# query_icmp off
-
-# TAG: test_reachability on|off
-# When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH
-# instead of ICP_MISS if the target host is NOT in the ICMP
-# database, or has a zero RTT.
-#Default:
-# test_reachability off
-
-# TAG: icp_query_timeout (msec)
-# Normally Squid will automatically determine an optimal ICP
-# query timeout value based on the round-trip-time of recent ICP
-# queries. If you want to override the value determined by
-# Squid, set this 'icp_query_timeout' to a non-zero value. This
-# value is specified in MILLISECONDS, so, to use a 2-second
-# timeout (the old default), you would write:
-#
-# icp_query_timeout 2000
-#Default:
-# Dynamic detection.
-
-# TAG: maximum_icp_query_timeout (msec)
-# Normally the ICP query timeout is determined dynamically. But
-# sometimes it can lead to very large values (say 5 seconds).
-# Use this option to put an upper limit on the dynamic timeout
-# value. Do NOT use this option to always use a fixed (instead
-# of a dynamic) timeout value. To set a fixed timeout see the
-# 'icp_query_timeout' directive.
-#Default:
-# maximum_icp_query_timeout 2000
-
-# TAG: minimum_icp_query_timeout (msec)
-# Normally the ICP query timeout is determined dynamically. But
-# sometimes it can lead to very small timeouts, even lower than
-# the normal latency variance on your link due to traffic.
-# Use this option to put an lower limit on the dynamic timeout
-# value. Do NOT use this option to always use a fixed (instead
-# of a dynamic) timeout value. To set a fixed timeout see the
-# 'icp_query_timeout' directive.
-#Default:
-# minimum_icp_query_timeout 5
-
-# TAG: background_ping_rate time-units
-# Controls how often the ICP pings are sent to siblings that
-# have background-ping set.
-#Default:
-# background_ping_rate 10 seconds
-
-# MULTICAST ICP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: mcast_groups
-# This tag specifies a list of multicast groups which your server
-# should join to receive multicasted ICP queries.
-#
-# NOTE! Be very careful what you put here! Be sure you
-# understand the difference between an ICP _query_ and an ICP
-# _reply_. This option is to be set only if you want to RECEIVE
-# multicast queries. Do NOT set this option to SEND multicast
-# ICP (use cache_peer for that). ICP replies are always sent via
-# unicast, so this option does not affect whether or not you will
-# receive replies from multicast group members.
-#
-# You must be very careful to NOT use a multicast address which
-# is already in use by another group of caches.
-#
-# If you are unsure about multicast, please read the Multicast
-# chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/).
-#
-# Usage: mcast_groups 239.128.16.128 224.0.1.20
-#
-# By default, Squid doesn't listen on any multicast groups.
-#Default:
-# none
-
-# TAG: mcast_miss_addr
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_STREAM define
-#
-# If you enable this option, every "cache miss" URL will
-# be sent out on the specified multicast address.
-#
-# Do not enable this option unless you are are absolutely
-# certain you understand what you are doing.
-#Default:
-# disabled.
-
-# TAG: mcast_miss_ttl
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_STREAM define
-#
-# This is the time-to-live value for packets multicasted
-# when multicasting off cache miss URLs is enabled. By
-# default this is set to 'site scope', i.e. 16.
-#Default:
-# mcast_miss_ttl 16
-
-# TAG: mcast_miss_port
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_STREAM define
-#
-# This is the port number to be used in conjunction with
-# 'mcast_miss_addr'.
-#Default:
-# mcast_miss_port 3135
-
-# TAG: mcast_miss_encode_key
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_STREAM define
-#
-# The URLs that are sent in the multicast miss stream are
-# encrypted. This is the encryption key.
-#Default:
-# mcast_miss_encode_key XXXXXXXXXXXXXXXX
-
-# TAG: mcast_icp_query_timeout (msec)
-# For multicast peers, Squid regularly sends out ICP "probes" to
-# count how many other peers are listening on the given multicast
-# address. This value specifies how long Squid should wait to
-# count all the replies. The default is 2000 msec, or 2
-# seconds.
-#Default:
-# mcast_icp_query_timeout 2000
-
-# INTERNAL ICON OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: icon_directory
-# Where the icons are stored. These are normally kept in
-# /usr/share/squid/icons
-#Default:
-# icon_directory /usr/share/squid/icons
-
-# TAG: global_internal_static
-# This directive controls is Squid should intercept all requests for
-# /squid-internal-static/ no matter which host the URL is requesting
-# (default on setting), or if nothing special should be done for
-# such URLs (off setting). The purpose of this directive is to make
-# icons etc work better in complex cache hierarchies where it may
-# not always be possible for all corners in the cache mesh to reach
-# the server generating a directory listing.
-#Default:
-# global_internal_static on
-
-# TAG: short_icon_urls
-# If this is enabled Squid will use short URLs for icons.
-# If disabled it will revert to the old behavior of including
-# it's own name and port in the URL.
-#
-# If you run a complex cache hierarchy with a mix of Squid and
-# other proxies you may need to disable this directive.
-#Default:
-# short_icon_urls on
-
-# ERROR PAGE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: error_directory
-# If you wish to create your own versions of the default
-# error files to customize them to suit your company copy
-# the error/template files to another directory and point
-# this tag at them.
-#
-# WARNING: This option will disable multi-language support
-# on error pages if used.
-#
-# The squid developers are interested in making squid available in
-# a wide variety of languages. If you are making translations for a
-# language that Squid does not currently provide please consider
-# contributing your translation back to the project.
-# http://wiki.squid-cache.org/Translations
-#
-# The squid developers working on translations are happy to supply drop-in
-# translated error files in exchange for any new language contributions.
-#Default:
-# Send error pages in the clients preferred language
-
-# TAG: error_default_language
-# Set the default language which squid will send error pages in
-# if no existing translation matches the clients language
-# preferences.
-#
-# If unset (default) generic English will be used.
-#
-# The squid developers are interested in making squid available in
-# a wide variety of languages. If you are interested in making
-# translations for any language see the squid wiki for details.
-# http://wiki.squid-cache.org/Translations
-#Default:
-# Generate English language pages.
-
-# TAG: error_log_languages
-# Log to cache.log what languages users are attempting to
-# auto-negotiate for translations.
-#
-# Successful negotiations are not logged. Only failures
-# have meaning to indicate that Squid may need an upgrade
-# of its error page translations.
-#Default:
-# error_log_languages on
-
-# TAG: err_page_stylesheet
-# CSS Stylesheet to pattern the display of Squid default error pages.
-#
-# For information on CSS see http://www.w3.org/Style/CSS/
-#Default:
-# err_page_stylesheet /etc/squid/errorpage.css
-
-# TAG: err_html_text
-# HTML text to include in error messages. Make this a "mailto"
-# URL to your admin address, or maybe just a link to your
-# organizations Web page.
-#
-# To include this in your error messages, you must rewrite
-# the error template files (found in the "errors" directory).
-# Wherever you want the 'err_html_text' line to appear,
-# insert a %L tag in the error template file.
-#Default:
-# none
-
-# TAG: email_err_data on|off
-# If enabled, information about the occurred error will be
-# included in the mailto links of the ERR pages (if %W is set)
-# so that the email body contains the data.
-# Syntax is <A HREF="mailto:%w%W">%w</A>
-#Default:
-# email_err_data on
-
-# TAG: deny_info
-# Usage: deny_info err_page_name acl
-# or deny_info http://... acl
-# or deny_info TCP_RESET acl
-#
-# This can be used to return a ERR_ page for requests which
-# do not pass the 'http_access' rules. Squid remembers the last
-# acl it evaluated in http_access, and if a 'deny_info' line exists
-# for that ACL Squid returns a corresponding error page.
-#
-# The acl is typically the last acl on the http_access deny line which
-# denied access. The exceptions to this rule are:
-# - When Squid needs to request authentication credentials. It's then
-# the first authentication related acl encountered
-# - When none of the http_access lines matches. It's then the last
-# acl processed on the last http_access line.
-# - When the decision to deny access was made by an adaptation service,
-# the acl name is the corresponding eCAP or ICAP service_name.
-#
-# NP: If providing your own custom error pages with error_directory
-# you may also specify them by your custom file name:
-# Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys
-#
-# By defaut Squid will send "403 Forbidden". A different 4xx or 5xx
-# may be specified by prefixing the file name with the code and a colon.
-# e.g. 404:ERR_CUSTOM_ACCESS_DENIED
-#
-# Alternatively you can tell Squid to reset the TCP connection
-# by specifying TCP_RESET.
-#
-# Or you can specify an error URL or URL pattern. The browsers will
-# get redirected to the specified URL after formatting tags have
-# been replaced. Redirect will be done with 302 or 307 according to
-# HTTP/1.1 specs. A different 3xx code may be specified by prefixing
-# the URL. e.g. 303:http://example.com/
-#
-# URL FORMAT TAGS:
-# %a - username (if available. Password NOT included)
-# %B - FTP path URL
-# %e - Error number
-# %E - Error description
-# %h - Squid hostname
-# %H - Request domain name
-# %i - Client IP Address
-# %M - Request Method
-# %o - Message result from external ACL helper
-# %p - Request Port number
-# %P - Request Protocol name
-# %R - Request URL path
-# %T - Timestamp in RFC 1123 format
-# %U - Full canonical URL from client
-# (HTTPS URLs terminate with *)
-# %u - Full canonical URL from client
-# %w - Admin email from squid.conf
-# %x - Error name
-# %% - Literal percent (%) code
-#
-#Default:
-# none
-
-# OPTIONS INFLUENCING REQUEST FORWARDING
-# -----------------------------------------------------------------------------
-
-# TAG: nonhierarchical_direct
-# By default, Squid will send any non-hierarchical requests
-# (not cacheable request type) direct to origin servers.
-#
-# When this is set to "off", Squid will prefer to send these
-# requests to parents.
-#
-# Note that in most configurations, by turning this off you will only
-# add latency to these request without any improvement in global hit
-# ratio.
-#
-# This option only sets a preference. If the parent is unavailable a
-# direct connection to the origin server may still be attempted. To
-# completely prevent direct connections use never_direct.
-#Default:
-# nonhierarchical_direct on
-
-# TAG: prefer_direct
-# Normally Squid tries to use parents for most requests. If you for some
-# reason like it to first try going direct and only use a parent if
-# going direct fails set this to on.
-#
-# By combining nonhierarchical_direct off and prefer_direct on you
-# can set up Squid to use a parent as a backup path if going direct
-# fails.
-#
-# Note: If you want Squid to use parents for all requests see
-# the never_direct directive. prefer_direct only modifies how Squid
-# acts on cacheable requests.
-#Default:
-# prefer_direct off
-
-# TAG: cache_miss_revalidate on|off
-# RFC 7232 defines a conditional request mechanism to prevent
-# response objects being unnecessarily transferred over the network.
-# If that mechanism is used by the client and a cache MISS occurs
-# it can prevent new cache entries being created.
-#
-# This option determines whether Squid on cache MISS will pass the
-# client revalidation request to the server or tries to fetch new
-# content for caching. It can be useful while the cache is mostly
-# empty to more quickly have the cache populated by generating
-# non-conditional GETs.
-#
-# When set to 'on' (default), Squid will pass all client If-* headers
-# to the server. This permits server responses without a cacheable
-# payload to be delivered and on MISS no new cache entry is created.
-#
-# When set to 'off' and if the request is cacheable, Squid will
-# remove the clients If-Modified-Since and If-None-Match headers from
-# the request sent to the server. This requests a 200 status response
-# from the server to create a new cache entry with.
-#Default:
-# cache_miss_revalidate on
-
-# TAG: always_direct
-# Usage: always_direct allow|deny [!]aclname ...
-#
-# Here you can use ACL elements to specify requests which should
-# ALWAYS be forwarded by Squid to the origin servers without using
-# any peers. For example, to always directly forward requests for
-# local servers ignoring any parents or siblings you may have use
-# something like:
-#
-# acl local-servers dstdomain my.domain.net
-# always_direct allow local-servers
-#
-# To always forward FTP requests directly, use
-#
-# acl FTP proto FTP
-# always_direct allow FTP
-#
-# NOTE: There is a similar, but opposite option named
-# 'never_direct'. You need to be aware that "always_direct deny
-# foo" is NOT the same thing as "never_direct allow foo". You
-# may need to use a deny rule to exclude a more-specific case of
-# some other rule. Example:
-#
-# acl local-external dstdomain external.foo.net
-# acl local-servers dstdomain .foo.net
-# always_direct deny local-external
-# always_direct allow local-servers
-#
-# NOTE: If your goal is to make the client forward the request
-# directly to the origin server bypassing Squid then this needs
-# to be done in the client configuration. Squid configuration
-# can only tell Squid how Squid should fetch the object.
-#
-# NOTE: This directive is not related to caching. The replies
-# is cached as usual even if you use always_direct. To not cache
-# the replies see the 'cache' directive.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# Prevent any cache_peer being used for this request.
-
-# TAG: never_direct
-# Usage: never_direct allow|deny [!]aclname ...
-#
-# never_direct is the opposite of always_direct. Please read
-# the description for always_direct if you have not already.
-#
-# With 'never_direct' you can use ACL elements to specify
-# requests which should NEVER be forwarded directly to origin
-# servers. For example, to force the use of a proxy for all
-# requests, except those in your local domain use something like:
-#
-# acl local-servers dstdomain .foo.net
-# never_direct deny local-servers
-# never_direct allow all
-#
-# or if Squid is inside a firewall and there are local intranet
-# servers inside the firewall use something like:
-#
-# acl local-intranet dstdomain .foo.net
-# acl local-external dstdomain external.foo.net
-# always_direct deny local-external
-# always_direct allow local-intranet
-# never_direct allow all
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# Allow DNS results to be used for this request.
-
-# ADVANCED NETWORKING OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: incoming_udp_average
-# Heavy voodoo here. I can't even believe you are reading this.
-# Are you crazy? Don't even think about adjusting these unless
-# you understand the algorithms in comm_select.c first!
-#Default:
-# incoming_udp_average 6
-
-# TAG: incoming_tcp_average
-# Heavy voodoo here. I can't even believe you are reading this.
-# Are you crazy? Don't even think about adjusting these unless
-# you understand the algorithms in comm_select.c first!
-#Default:
-# incoming_tcp_average 4
-
-# TAG: incoming_dns_average
-# Heavy voodoo here. I can't even believe you are reading this.
-# Are you crazy? Don't even think about adjusting these unless
-# you understand the algorithms in comm_select.c first!
-#Default:
-# incoming_dns_average 4
-
-# TAG: min_udp_poll_cnt
-# Heavy voodoo here. I can't even believe you are reading this.
-# Are you crazy? Don't even think about adjusting these unless
-# you understand the algorithms in comm_select.c first!
-#Default:
-# min_udp_poll_cnt 8
-
-# TAG: min_dns_poll_cnt
-# Heavy voodoo here. I can't even believe you are reading this.
-# Are you crazy? Don't even think about adjusting these unless
-# you understand the algorithms in comm_select.c first!
-#Default:
-# min_dns_poll_cnt 8
-
-# TAG: min_tcp_poll_cnt
-# Heavy voodoo here. I can't even believe you are reading this.
-# Are you crazy? Don't even think about adjusting these unless
-# you understand the algorithms in comm_select.c first!
-#Default:
-# min_tcp_poll_cnt 8
-
-# TAG: accept_filter
-# FreeBSD:
-#
-# The name of an accept(2) filter to install on Squid's
-# listen socket(s). This feature is perhaps specific to
-# FreeBSD and requires support in the kernel.
-#
-# The 'httpready' filter delays delivering new connections
-# to Squid until a full HTTP request has been received.
-# See the accf_http(9) man page for details.
-#
-# The 'dataready' filter delays delivering new connections
-# to Squid until there is some data to process.
-# See the accf_dataready(9) man page for details.
-#
-# Linux:
-#
-# The 'data' filter delays delivering of new connections
-# to Squid until there is some data to process by TCP_ACCEPT_DEFER.
-# You may optionally specify a number of seconds to wait by
-# 'data=N' where N is the number of seconds. Defaults to 30
-# if not specified. See the tcp(7) man page for details.
-#EXAMPLE:
-## FreeBSD
-#accept_filter httpready
-## Linux
-#accept_filter data
-#Default:
-# none
-
-# TAG: client_ip_max_connections
-# Set an absolute limit on the number of connections a single
-# client IP can use. Any more than this and Squid will begin to drop
-# new connections from the client until it closes some links.
-#
-# Note that this is a global limit. It affects all HTTP, HTCP, Gopher and FTP
-# connections from the client. For finer control use the ACL access controls.
-#
-# Requires client_db to be enabled (the default).
-#
-# WARNING: This may noticably slow down traffic received via external proxies
-# or NAT devices and cause them to rebound error messages back to their clients.
-#Default:
-# No limit.
-
-# TAG: tcp_recv_bufsize (bytes)
-# Size of receive buffer to set for TCP sockets. Probably just
-# as easy to change your kernel's default.
-# Omit from squid.conf to use the default buffer size.
-#Default:
-# Use operating system TCP defaults.
-
-# ICAP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: icap_enable on|off
-# If you want to enable the ICAP module support, set this to on.
-#Default:
-# icap_enable off
-
-# TAG: icap_connect_timeout
-# This parameter specifies how long to wait for the TCP connect to
-# the requested ICAP server to complete before giving up and either
-# terminating the HTTP transaction or bypassing the failure.
-#
-# The default for optional services is peer_connect_timeout.
-# The default for essential services is connect_timeout.
-# If this option is explicitly set, its value applies to all services.
-#Default:
-# none
-
-# TAG: icap_io_timeout time-units
-# This parameter specifies how long to wait for an I/O activity on
-# an established, active ICAP connection before giving up and
-# either terminating the HTTP transaction or bypassing the
-# failure.
-#Default:
-# Use read_timeout.
-
-# TAG: icap_service_failure_limit limit [in memory-depth time-units]
-# The limit specifies the number of failures that Squid tolerates
-# when establishing a new TCP connection with an ICAP service. If
-# the number of failures exceeds the limit, the ICAP service is
-# not used for new ICAP requests until it is time to refresh its
-# OPTIONS.
-#
-# A negative value disables the limit. Without the limit, an ICAP
-# service will not be considered down due to connectivity failures
-# between ICAP OPTIONS requests.
-#
-# Squid forgets ICAP service failures older than the specified
-# value of memory-depth. The memory fading algorithm
-# is approximate because Squid does not remember individual
-# errors but groups them instead, splitting the option
-# value into ten time slots of equal length.
-#
-# When memory-depth is 0 and by default this option has no
-# effect on service failure expiration.
-#
-# Squid always forgets failures when updating service settings
-# using an ICAP OPTIONS transaction, regardless of this option
-# setting.
-#
-# For example,
-# # suspend service usage after 10 failures in 5 seconds:
-# icap_service_failure_limit 10 in 5 seconds
-#Default:
-# icap_service_failure_limit 10
-
-# TAG: icap_service_revival_delay
-# The delay specifies the number of seconds to wait after an ICAP
-# OPTIONS request failure before requesting the options again. The
-# failed ICAP service is considered "down" until fresh OPTIONS are
-# fetched.
-#
-# The actual delay cannot be smaller than the hardcoded minimum
-# delay of 30 seconds.
-#Default:
-# icap_service_revival_delay 180
-
-# TAG: icap_preview_enable on|off
-# The ICAP Preview feature allows the ICAP server to handle the
-# HTTP message by looking only at the beginning of the message body
-# or even without receiving the body at all. In some environments,
-# previews greatly speedup ICAP processing.
-#
-# During an ICAP OPTIONS transaction, the server may tell Squid what
-# HTTP messages should be previewed and how big the preview should be.
-# Squid will not use Preview if the server did not request one.
-#
-# To disable ICAP Preview for all ICAP services, regardless of
-# individual ICAP server OPTIONS responses, set this option to "off".
-#Example:
-#icap_preview_enable off
-#Default:
-# icap_preview_enable on
-
-# TAG: icap_preview_size
-# The default size of preview data to be sent to the ICAP server.
-# This value might be overwritten on a per server basis by OPTIONS requests.
-#Default:
-# No preview sent.
-
-# TAG: icap_206_enable on|off
-# 206 (Partial Content) responses is an ICAP extension that allows the
-# ICAP agents to optionally combine adapted and original HTTP message
-# content. The decision to combine is postponed until the end of the
-# ICAP response. Squid supports Partial Content extension by default.
-#
-# Activation of the Partial Content extension is negotiated with each
-# ICAP service during OPTIONS exchange. Most ICAP servers should handle
-# negotation correctly even if they do not support the extension, but
-# some might fail. To disable Partial Content support for all ICAP
-# services and to avoid any negotiation, set this option to "off".
-#
-# Example:
-# icap_206_enable off
-#Default:
-# icap_206_enable on
-
-# TAG: icap_default_options_ttl
-# The default TTL value for ICAP OPTIONS responses that don't have
-# an Options-TTL header.
-#Default:
-# icap_default_options_ttl 60
-
-# TAG: icap_persistent_connections on|off
-# Whether or not Squid should use persistent connections to
-# an ICAP server.
-#Default:
-# icap_persistent_connections on
-
-# TAG: adaptation_send_client_ip on|off
-# If enabled, Squid shares HTTP client IP information with adaptation
-# services. For ICAP, Squid adds the X-Client-IP header to ICAP requests.
-# For eCAP, Squid sets the libecap::metaClientIp transaction option.
-#
-# See also: adaptation_uses_indirect_client
-#Default:
-# adaptation_send_client_ip off
-
-# TAG: adaptation_send_username on|off
-# This sends authenticated HTTP client username (if available) to
-# the adaptation service.
-#
-# For ICAP, the username value is encoded based on the
-# icap_client_username_encode option and is sent using the header
-# specified by the icap_client_username_header option.
-#Default:
-# adaptation_send_username off
-
-# TAG: icap_client_username_header
-# ICAP request header name to use for adaptation_send_username.
-#Default:
-# icap_client_username_header X-Client-Username
-
-# TAG: icap_client_username_encode on|off
-# Whether to base64 encode the authenticated client username.
-#Default:
-# icap_client_username_encode off
-
-# TAG: icap_service
-# Defines a single ICAP service using the following format:
-#
-# icap_service id vectoring_point uri [option ...]
-#
-# id: ID
-# an opaque identifier or name which is used to direct traffic to
-# this specific service. Must be unique among all adaptation
-# services in squid.conf.
-#
-# vectoring_point: reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache
-# This specifies at which point of transaction processing the
-# ICAP service should be activated. *_postcache vectoring points
-# are not yet supported.
-#
-# uri: icap://servername:port/servicepath
-# ICAP server and service location.
-#
-# ICAP does not allow a single service to handle both REQMOD and RESPMOD
-# transactions. Squid does not enforce that requirement. You can specify
-# services with the same service_url and different vectoring_points. You
-# can even specify multiple identical services as long as their
-# service_names differ.
-#
-# To activate a service, use the adaptation_access directive. To group
-# services, use adaptation_service_chain and adaptation_service_set.
-#
-# Service options are separated by white space. ICAP services support
-# the following name=value options:
-#
-# bypass=on|off|1|0
-# If set to 'on' or '1', the ICAP service is treated as
-# optional. If the service cannot be reached or malfunctions,
-# Squid will try to ignore any errors and process the message as
-# if the service was not enabled. No all ICAP errors can be
-# bypassed. If set to 0, the ICAP service is treated as
-# essential and all ICAP errors will result in an error page
-# returned to the HTTP client.
-#
-# Bypass is off by default: services are treated as essential.
-#
-# routing=on|off|1|0
-# If set to 'on' or '1', the ICAP service is allowed to
-# dynamically change the current message adaptation plan by
-# returning a chain of services to be used next. The services
-# are specified using the X-Next-Services ICAP response header
-# value, formatted as a comma-separated list of service names.
-# Each named service should be configured in squid.conf. Other
-# services are ignored. An empty X-Next-Services value results
-# in an empty plan which ends the current adaptation.
-#
-# Dynamic adaptation plan may cross or cover multiple supported
-# vectoring points in their natural processing order.
-#
-# Routing is not allowed by default: the ICAP X-Next-Services
-# response header is ignored.
-#
-# ipv6=on|off
-# Only has effect on split-stack systems. The default on those systems
-# is to use IPv4-only connections. When set to 'on' this option will
-# make Squid use IPv6-only connections to contact this ICAP service.
-#
-# on-overload=block|bypass|wait|force
-# If the service Max-Connections limit has been reached, do
-# one of the following for each new ICAP transaction:
-# * block: send an HTTP error response to the client
-# * bypass: ignore the "over-connected" ICAP service
-# * wait: wait (in a FIFO queue) for an ICAP connection slot
-# * force: proceed, ignoring the Max-Connections limit
-#
-# In SMP mode with N workers, each worker assumes the service
-# connection limit is Max-Connections/N, even though not all
-# workers may use a given service.
-#
-# The default value is "bypass" if service is bypassable,
-# otherwise it is set to "wait".
-#
-#
-# max-conn=number
-# Use the given number as the Max-Connections limit, regardless
-# of the Max-Connections value given by the service, if any.
-#
-# Older icap_service format without optional named parameters is
-# deprecated but supported for backward compatibility.
-#
-#Example:
-#icap_service svcBlocker reqmod_precache icap://icap1.mydomain.net:1344/reqmod bypass=0
-#icap_service svcLogger reqmod_precache icap://icap2.mydomain.net:1344/respmod routing=on
-#Default:
-# none
-
-# TAG: icap_class
-# This deprecated option was documented to define an ICAP service
-# chain, even though it actually defined a set of similar, redundant
-# services, and the chains were not supported.
-#
-# To define a set of redundant services, please use the
-# adaptation_service_set directive. For service chains, use
-# adaptation_service_chain.
-#Default:
-# none
-
-# TAG: icap_access
-# This option is deprecated. Please use adaptation_access, which
-# has the same ICAP functionality, but comes with better
-# documentation, and eCAP support.
-#Default:
-# none
-
-# eCAP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: ecap_enable on|off
-# Controls whether eCAP support is enabled.
-#Default:
-# ecap_enable off
-
-# TAG: ecap_service
-# Defines a single eCAP service
-#
-# ecap_service id vectoring_point uri [option ...]
-#
-# id: ID
-# an opaque identifier or name which is used to direct traffic to
-# this specific service. Must be unique among all adaptation
-# services in squid.conf.
-#
-# vectoring_point: reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache
-# This specifies at which point of transaction processing the
-# eCAP service should be activated. *_postcache vectoring points
-# are not yet supported.
-#
-# uri: ecap://vendor/service_name?custom&cgi=style&parameters=optional
-# Squid uses the eCAP service URI to match this configuration
-# line with one of the dynamically loaded services. Each loaded
-# eCAP service must have a unique URI. Obtain the right URI from
-# the service provider.
-#
-# To activate a service, use the adaptation_access directive. To group
-# services, use adaptation_service_chain and adaptation_service_set.
-#
-# Service options are separated by white space. eCAP services support
-# the following name=value options:
-#
-# bypass=on|off|1|0
-# If set to 'on' or '1', the eCAP service is treated as optional.
-# If the service cannot be reached or malfunctions, Squid will try
-# to ignore any errors and process the message as if the service
-# was not enabled. No all eCAP errors can be bypassed.
-# If set to 'off' or '0', the eCAP service is treated as essential
-# and all eCAP errors will result in an error page returned to the
-# HTTP client.
-#
-# Bypass is off by default: services are treated as essential.
-#
-# routing=on|off|1|0
-# If set to 'on' or '1', the eCAP service is allowed to
-# dynamically change the current message adaptation plan by
-# returning a chain of services to be used next.
-#
-# Dynamic adaptation plan may cross or cover multiple supported
-# vectoring points in their natural processing order.
-#
-# Routing is not allowed by default.
-#
-# Older ecap_service format without optional named parameters is
-# deprecated but supported for backward compatibility.
-#
-#
-#Example:
-#ecap_service s1 reqmod_precache ecap://filters.R.us/leakDetector?on_error=block bypass=off
-#ecap_service s2 respmod_precache ecap://filters.R.us/virusFilter config=/etc/vf.cfg bypass=on
-#Default:
-# none
-
-# TAG: loadable_modules
-# Instructs Squid to load the specified dynamic module(s) or activate
-# preloaded module(s).
-#Example:
-#loadable_modules /usr/lib/MinimalAdapter.so
-#Default:
-# none
-
-# MESSAGE ADAPTATION OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: adaptation_service_set
-#
-# Configures an ordered set of similar, redundant services. This is
-# useful when hot standby or backup adaptation servers are available.
-#
-# adaptation_service_set set_name service_name1 service_name2 ...
-#
-# The named services are used in the set declaration order. The first
-# applicable adaptation service from the set is used first. The next
-# applicable service is tried if and only if the transaction with the
-# previous service fails and the message waiting to be adapted is still
-# intact.
-#
-# When adaptation starts, broken services are ignored as if they were
-# not a part of the set. A broken service is a down optional service.
-#
-# The services in a set must be attached to the same vectoring point
-# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD).
-#
-# If all services in a set are optional then adaptation failures are
-# bypassable. If all services in the set are essential, then a
-# transaction failure with one service may still be retried using
-# another service from the set, but when all services fail, the master
-# transaction fails as well.
-#
-# A set may contain a mix of optional and essential services, but that
-# is likely to lead to surprising results because broken services become
-# ignored (see above), making previously bypassable failures fatal.
-# Technically, it is the bypassability of the last failed service that
-# matters.
-#
-# See also: adaptation_access adaptation_service_chain
-#
-#Example:
-#adaptation_service_set svcBlocker urlFilterPrimary urlFilterBackup
-#adaptation service_set svcLogger loggerLocal loggerRemote
-#Default:
-# none
-
-# TAG: adaptation_service_chain
-#
-# Configures a list of complementary services that will be applied
-# one-by-one, forming an adaptation chain or pipeline. This is useful
-# when Squid must perform different adaptations on the same message.
-#
-# adaptation_service_chain chain_name service_name1 svc_name2 ...
-#
-# The named services are used in the chain declaration order. The first
-# applicable adaptation service from the chain is used first. The next
-# applicable service is applied to the successful adaptation results of
-# the previous service in the chain.
-#
-# When adaptation starts, broken services are ignored as if they were
-# not a part of the chain. A broken service is a down optional service.
-#
-# Request satisfaction terminates the adaptation chain because Squid
-# does not currently allow declaration of RESPMOD services at the
-# "reqmod_precache" vectoring point (see icap_service or ecap_service).
-#
-# The services in a chain must be attached to the same vectoring point
-# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD).
-#
-# A chain may contain a mix of optional and essential services. If an
-# essential adaptation fails (or the failure cannot be bypassed for
-# other reasons), the master transaction fails. Otherwise, the failure
-# is bypassed as if the failed adaptation service was not in the chain.
-#
-# See also: adaptation_access adaptation_service_set
-#
-#Example:
-#adaptation_service_chain svcRequest requestLogger urlFilter leakDetector
-#Default:
-# none
-
-# TAG: adaptation_access
-# Sends an HTTP transaction to an ICAP or eCAP adaptation service.
-#
-# adaptation_access service_name allow|deny [!]aclname...
-# adaptation_access set_name allow|deny [!]aclname...
-#
-# At each supported vectoring point, the adaptation_access
-# statements are processed in the order they appear in this
-# configuration file. Statements pointing to the following services
-# are ignored (i.e., skipped without checking their ACL):
-#
-# - services serving different vectoring points
-# - "broken-but-bypassable" services
-# - "up" services configured to ignore such transactions
-# (e.g., based on the ICAP Transfer-Ignore header).
-#
-# When a set_name is used, all services in the set are checked
-# using the same rules, to find the first applicable one. See
-# adaptation_service_set for details.
-#
-# If an access list is checked and there is a match, the
-# processing stops: For an "allow" rule, the corresponding
-# adaptation service is used for the transaction. For a "deny"
-# rule, no adaptation service is activated.
-#
-# It is currently not possible to apply more than one adaptation
-# service at the same vectoring point to the same HTTP transaction.
-#
-# See also: icap_service and ecap_service
-#
-#Example:
-#adaptation_access service_1 allow all
-#Default:
-# Allow, unless rules exist in squid.conf.
-
-# TAG: adaptation_service_iteration_limit
-# Limits the number of iterations allowed when applying adaptation
-# services to a message. If your longest adaptation set or chain
-# may have more than 16 services, increase the limit beyond its
-# default value of 16. If detecting infinite iteration loops sooner
-# is critical, make the iteration limit match the actual number
-# of services in your longest adaptation set or chain.
-#
-# Infinite adaptation loops are most likely with routing services.
-#
-# See also: icap_service routing=1
-#Default:
-# adaptation_service_iteration_limit 16
-
-# TAG: adaptation_masterx_shared_names
-# For each master transaction (i.e., the HTTP request and response
-# sequence, including all related ICAP and eCAP exchanges), Squid
-# maintains a table of metadata. The table entries are (name, value)
-# pairs shared among eCAP and ICAP exchanges. The table is destroyed
-# with the master transaction.
-#
-# This option specifies the table entry names that Squid must accept
-# from and forward to the adaptation transactions.
-#
-# An ICAP REQMOD or RESPMOD transaction may set an entry in the
-# shared table by returning an ICAP header field with a name
-# specified in adaptation_masterx_shared_names.
-#
-# An eCAP REQMOD or RESPMOD transaction may set an entry in the
-# shared table by implementing the libecap::visitEachOption() API
-# to provide an option with a name specified in
-# adaptation_masterx_shared_names.
-#
-# Squid will store and forward the set entry to subsequent adaptation
-# transactions within the same master transaction scope.
-#
-# Only one shared entry name is supported at this time.
-#
-#Example:
-## share authentication information among ICAP services
-#adaptation_masterx_shared_names X-Subscriber-ID
-#Default:
-# none
-
-# TAG: adaptation_meta
-# This option allows Squid administrator to add custom ICAP request
-# headers or eCAP options to Squid ICAP requests or eCAP transactions.
-# Use it to pass custom authentication tokens and other
-# transaction-state related meta information to an ICAP/eCAP service.
-#
-# The addition of a meta header is ACL-driven:
-# adaptation_meta name value [!]aclname ...
-#
-# Processing for a given header name stops after the first ACL list match.
-# Thus, it is impossible to add two headers with the same name. If no ACL
-# lists match for a given header name, no such header is added. For
-# example:
-#
-# # do not debug transactions except for those that need debugging
-# adaptation_meta X-Debug 1 needs_debugging
-#
-# # log all transactions except for those that must remain secret
-# adaptation_meta X-Log 1 !keep_secret
-#
-# # mark transactions from users in the "G 1" group
-# adaptation_meta X-Authenticated-Groups "G 1" authed_as_G1
-#
-# The "value" parameter may be a regular squid.conf token or a "double
-# quoted string". Within the quoted string, use backslash (\) to escape
-# any character, which is currently only useful for escaping backslashes
-# and double quotes. For example,
-# "this string has one backslash (\\) and two \"quotes\""
-#
-# Used adaptation_meta header values may be logged via %note
-# logformat code. If multiple adaptation_meta headers with the same name
-# are used during master transaction lifetime, the header values are
-# logged in the order they were used and duplicate values are ignored
-# (only the first repeated value will be logged).
-#Default:
-# none
-
-# TAG: icap_retry
-# This ACL determines which retriable ICAP transactions are
-# retried. Transactions that received a complete ICAP response
-# and did not have to consume or produce HTTP bodies to receive
-# that response are usually retriable.
-#
-# icap_retry allow|deny [!]aclname ...
-#
-# Squid automatically retries some ICAP I/O timeouts and errors
-# due to persistent connection race conditions.
-#
-# See also: icap_retry_limit
-#Default:
-# icap_retry deny all
-
-# TAG: icap_retry_limit
-# Limits the number of retries allowed.
-#
-# Communication errors due to persistent connection race
-# conditions are unavoidable, automatically retried, and do not
-# count against this limit.
-#
-# See also: icap_retry
-#Default:
-# No retries are allowed.
-
-# DNS OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: check_hostnames
-# For security and stability reasons Squid can check
-# hostnames for Internet standard RFC compliance. If you want
-# Squid to perform these checks turn this directive on.
-#Default:
-# check_hostnames off
-
-# TAG: allow_underscore
-# Underscore characters is not strictly allowed in Internet hostnames
-# but nevertheless used by many sites. Set this to off if you want
-# Squid to be strict about the standard.
-# This check is performed only when check_hostnames is set to on.
-#Default:
-# allow_underscore on
-
-# TAG: dns_retransmit_interval
-# Initial retransmit interval for DNS queries. The interval is
-# doubled each time all configured DNS servers have been tried.
-#Default:
-# dns_retransmit_interval 5 seconds
-
-# TAG: dns_timeout
-# DNS Query timeout. If no response is received to a DNS query
-# within this time all DNS servers for the queried domain
-# are assumed to be unavailable.
-#Default:
-# dns_timeout 30 seconds
-
-# TAG: dns_packet_max
-# Maximum number of bytes packet size to advertise via EDNS.
-# Set to "none" to disable EDNS large packet support.
-#
-# For legacy reasons DNS UDP replies will default to 512 bytes which
-# is too small for many responses. EDNS provides a means for Squid to
-# negotiate receiving larger responses back immediately without having
-# to failover with repeat requests. Responses larger than this limit
-# will retain the old behaviour of failover to TCP DNS.
-#
-# Squid has no real fixed limit internally, but allowing packet sizes
-# over 1500 bytes requires network jumbogram support and is usually not
-# necessary.
-#
-# WARNING: The RFC also indicates that some older resolvers will reply
-# with failure of the whole request if the extension is added. Some
-# resolvers have already been identified which will reply with mangled
-# EDNS response on occasion. Usually in response to many-KB jumbogram
-# sizes being advertised by Squid.
-# Squid will currently treat these both as an unable-to-resolve domain
-# even if it would be resolvable without EDNS.
-#Default:
-# EDNS disabled
-
-# TAG: dns_defnames on|off
-# Normally the RES_DEFNAMES resolver option is disabled
-# (see res_init(3)). This prevents caches in a hierarchy
-# from interpreting single-component hostnames locally. To allow
-# Squid to handle single-component names, enable this option.
-#Default:
-# Search for single-label domain names is disabled.
-
-# TAG: dns_multicast_local on|off
-# When set to on, Squid sends multicast DNS lookups on the local
-# network for domains ending in .local and .arpa.
-# This enables local servers and devices to be contacted in an
-# ad-hoc or zero-configuration network environment.
-#Default:
-# Search for .local and .arpa names is disabled.
-
-# TAG: dns_nameservers
-# Use this if you want to specify a list of DNS name servers
-# (IP addresses) to use instead of those given in your
-# /etc/resolv.conf file.
-#
-# On Windows platforms, if no value is specified here or in
-# the /etc/resolv.conf file, the list of DNS name servers are
-# taken from the Windows registry, both static and dynamic DHCP
-# configurations are supported.
-#
-# Example: dns_nameservers 10.0.0.1 192.172.0.4
-#Default:
-# Use operating system definitions
-
-# TAG: hosts_file
-# Location of the host-local IP name-address associations
-# database. Most Operating Systems have such a file on different
-# default locations:
-# - Un*X & Linux: /etc/hosts
-# - Windows NT/2000: %SystemRoot%\system32\drivers\etc\hosts
-# (%SystemRoot% value install default is c:\winnt)
-# - Windows XP/2003: %SystemRoot%\system32\drivers\etc\hosts
-# (%SystemRoot% value install default is c:\windows)
-# - Windows 9x/Me: %windir%\hosts
-# (%windir% value is usually c:\windows)
-# - Cygwin: /etc/hosts
-#
-# The file contains newline-separated definitions, in the
-# form ip_address_in_dotted_form name [name ...] names are
-# whitespace-separated. Lines beginning with an hash (#)
-# character are comments.
-#
-# The file is checked at startup and upon configuration.
-# If set to 'none', it won't be checked.
-# If append_domain is used, that domain will be added to
-# domain-local (i.e. not containing any dot character) host
-# definitions.
-#Default:
-# hosts_file /etc/hosts
-
-# TAG: append_domain
-# Appends local domain name to hostnames without any dots in
-# them. append_domain must begin with a period.
-#
-# Be warned there are now Internet names with no dots in
-# them using only top-domain names, so setting this may
-# cause some Internet sites to become unavailable.
-#
-#Example:
-# append_domain .yourdomain.com
-#Default:
-# Use operating system definitions
-
-# TAG: ignore_unknown_nameservers
-# By default Squid checks that DNS responses are received
-# from the same IP addresses they are sent to. If they
-# don't match, Squid ignores the response and writes a warning
-# message to cache.log. You can allow responses from unknown
-# nameservers by setting this option to 'off'.
-#Default:
-# ignore_unknown_nameservers on
-
-# TAG: dns_v4_first
-# With the IPv6 Internet being as fast or faster than IPv4 Internet
-# for most networks Squid prefers to contact websites over IPv6.
-#
-# This option reverses the order of preference to make Squid contact
-# dual-stack websites over IPv4 first. Squid will still perform both
-# IPv6 and IPv4 DNS lookups before connecting.
-#
-# WARNING:
-# This option will restrict the situations under which IPv6
-# connectivity is used (and tested), potentially hiding network
-# problems which would otherwise be detected and warned about.
-#Default:
-# dns_v4_first off
-
-# TAG: ipcache_size (number of entries)
-# Maximum number of DNS IP cache entries.
-#Default:
-# ipcache_size 1024
-
-# TAG: ipcache_low (percent)
-#Default:
-# ipcache_low 90
-
-# TAG: ipcache_high (percent)
-# The size, low-, and high-water marks for the IP cache.
-#Default:
-# ipcache_high 95
-
-# TAG: fqdncache_size (number of entries)
-# Maximum number of FQDN cache entries.
-#Default:
-# fqdncache_size 1024
-
-# MISCELLANEOUS
-# -----------------------------------------------------------------------------
-
-# TAG: configuration_includes_quoted_values on|off
-# If set, Squid will recognize each "quoted string" after a configuration
-# directive as a single parameter. The quotes are stripped before the
-# parameter value is interpreted or used.
-# See "Values with spaces, quotes, and other special characters"
-# section for more details.
-#Default:
-# configuration_includes_quoted_values off
-
-# TAG: memory_pools on|off
-# If set, Squid will keep pools of allocated (but unused) memory
-# available for future use. If memory is a premium on your
-# system and you believe your malloc library outperforms Squid
-# routines, disable this.
-#Default:
-# memory_pools on
-
-# TAG: memory_pools_limit (bytes)
-# Used only with memory_pools on:
-# memory_pools_limit 50 MB
-#
-# If set to a non-zero value, Squid will keep at most the specified
-# limit of allocated (but unused) memory in memory pools. All free()
-# requests that exceed this limit will be handled by your malloc
-# library. Squid does not pre-allocate any memory, just safe-keeps
-# objects that otherwise would be free()d. Thus, it is safe to set
-# memory_pools_limit to a reasonably high value even if your
-# configuration will use less memory.
-#
-# If set to none, Squid will keep all memory it can. That is, there
-# will be no limit on the total amount of memory used for safe-keeping.
-#
-# To disable memory allocation optimization, do not set
-# memory_pools_limit to 0 or none. Set memory_pools to "off" instead.
-#
-# An overhead for maintaining memory pools is not taken into account
-# when the limit is checked. This overhead is close to four bytes per
-# object kept. However, pools may actually _save_ memory because of
-# reduced memory thrashing in your malloc library.
-#Default:
-# memory_pools_limit 5 MB
-
-# TAG: forwarded_for on|off|transparent|truncate|delete
-# If set to "on", Squid will append your client's IP address
-# in the HTTP requests it forwards. By default it looks like:
-#
-# X-Forwarded-For: 192.1.2.3
-#
-# If set to "off", it will appear as
-#
-# X-Forwarded-For: unknown
-#
-# If set to "transparent", Squid will not alter the
-# X-Forwarded-For header in any way.
-#
-# If set to "delete", Squid will delete the entire
-# X-Forwarded-For header.
-#
-# If set to "truncate", Squid will remove all existing
-# X-Forwarded-For entries, and place the client IP as the sole entry.
-#Default:
-# forwarded_for on
-
-# TAG: cachemgr_passwd
-# Specify passwords for cachemgr operations.
-#
-# Usage: cachemgr_passwd password action action ...
-#
-# Some valid actions are (see cache manager menu for a full list):
-# 5min
-# 60min
-# asndb
-# authenticator
-# cbdata
-# client_list
-# comm_incoming
-# config *
-# counters
-# delay
-# digest_stats
-# dns
-# events
-# filedescriptors
-# fqdncache
-# histograms
-# http_headers
-# info
-# io
-# ipcache
-# mem
-# menu
-# netdb
-# non_peers
-# objects
-# offline_toggle *
-# pconn
-# peer_select
-# reconfigure *
-# redirector
-# refresh
-# server_list
-# shutdown *
-# store_digest
-# storedir
-# utilization
-# via_headers
-# vm_objects
-#
-# * Indicates actions which will not be performed without a
-# valid password, others can be performed if not listed here.
-#
-# To disable an action, set the password to "disable".
-# To allow performing an action without a password, set the
-# password to "none".
-#
-# Use the keyword "all" to set the same password for all actions.
-#
-#Example:
-# cachemgr_passwd secret shutdown
-# cachemgr_passwd lesssssssecret info stats/objects
-# cachemgr_passwd disable all
-#Default:
-# No password. Actions which require password are denied.
-
-# TAG: client_db on|off
-# If you want to disable collecting per-client statistics,
-# turn off client_db here.
-#Default:
-# client_db on
-
-# TAG: refresh_all_ims on|off
-# When you enable this option, squid will always check
-# the origin server for an update when a client sends an
-# If-Modified-Since request. Many browsers use IMS
-# requests when the user requests a reload, and this
-# ensures those clients receive the latest version.
-#
-# By default (off), squid may return a Not Modified response
-# based on the age of the cached version.
-#Default:
-# refresh_all_ims off
-
-# TAG: reload_into_ims on|off
-# When you enable this option, client no-cache or ``reload''
-# requests will be changed to If-Modified-Since requests.
-# Doing this VIOLATES the HTTP standard. Enabling this
-# feature could make you liable for problems which it
-# causes.
-#
-# see also refresh_pattern for a more selective approach.
-#Default:
-# reload_into_ims off
-
-# TAG: connect_retries
-# This sets the maximum number of connection attempts made for each
-# TCP connection. The connect_retries attempts must all still
-# complete within the connection timeout period.
-#
-# The default is not to re-try if the first connection attempt fails.
-# The (not recommended) maximum is 10 tries.
-#
-# A warning message will be generated if it is set to a too-high
-# value and the configured value will be over-ridden.
-#
-# Note: These re-tries are in addition to forward_max_tries
-# which limit how many different addresses may be tried to find
-# a useful server.
-#Default:
-# Do not retry failed connections.
-
-# TAG: retry_on_error
-# If set to ON Squid will automatically retry requests when
-# receiving an error response with status 403 (Forbidden),
-# 500 (Internal Error), 501 or 503 (Service not available).
-# Status 502 and 504 (Gateway errors) are always retried.
-#
-# This is mainly useful if you are in a complex cache hierarchy to
-# work around access control errors.
-#
-# NOTE: This retry will attempt to find another working destination.
-# Which is different from the server which just failed.
-#Default:
-# retry_on_error off
-
-# TAG: as_whois_server
-# WHOIS server to query for AS numbers. NOTE: AS numbers are
-# queried only when Squid starts up, not for every request.
-#Default:
-# as_whois_server whois.ra.net
-
-# TAG: offline_mode
-# Enable this option and Squid will never try to validate cached
-# objects.
-#Default:
-# offline_mode off
-
-# TAG: uri_whitespace
-# What to do with requests that have whitespace characters in the
-# URI. Options:
-#
-# strip: The whitespace characters are stripped out of the URL.
-# This is the behavior recommended by RFC2396 and RFC3986
-# for tolerant handling of generic URI.
-# NOTE: This is one difference between generic URI and HTTP URLs.
-#
-# deny: The request is denied. The user receives an "Invalid
-# Request" message.
-# This is the behaviour recommended by RFC2616 for safe
-# handling of HTTP request URL.
-#
-# allow: The request is allowed and the URI is not changed. The
-# whitespace characters remain in the URI. Note the
-# whitespace is passed to redirector processes if they
-# are in use.
-# Note this may be considered a violation of RFC2616
-# request parsing where whitespace is prohibited in the
-# URL field.
-#
-# encode: The request is allowed and the whitespace characters are
-# encoded according to RFC1738.
-#
-# chop: The request is allowed and the URI is chopped at the
-# first whitespace.
-#
-#
-# NOTE the current Squid implementation of encode and chop violates
-# RFC2616 by not using a 301 redirect after altering the URL.
-#Default:
-# uri_whitespace strip
-
-# TAG: chroot
-# Specifies a directory where Squid should do a chroot() while
-# initializing. This also causes Squid to fully drop root
-# privileges after initializing. This means, for example, if you
-# use a HTTP port less than 1024 and try to reconfigure, you may
-# get an error saying that Squid can not open the port.
-#Default:
-# none
-
-# TAG: balance_on_multiple_ip
-# Modern IP resolvers in squid sort lookup results by preferred access.
-# By default squid will use these IP in order and only rotates to
-# the next listed when the most preffered fails.
-#
-# Some load balancing servers based on round robin DNS have been
-# found not to preserve user session state across requests
-# to different IP addresses.
-#
-# Enabling this directive Squid rotates IP's per request.
-#Default:
-# balance_on_multiple_ip off
-
-# TAG: pipeline_prefetch
-# HTTP clients may send a pipeline of 1+N requests to Squid using a
-# single connection, without waiting for Squid to respond to the first
-# of those requests. This option limits the number of concurrent
-# requests Squid will try to handle in parallel. If set to N, Squid
-# will try to receive and process up to 1+N requests on the same
-# connection concurrently.
-#
-# Defaults to 0 (off) for bandwidth management and access logging
-# reasons.
-#
-# NOTE: pipelining requires persistent connections to clients.
-#
-# WARNING: pipelining breaks NTLM and Negotiate/Kerberos authentication.
-#Default:
-# Do not pre-parse pipelined requests.
-
-# TAG: high_response_time_warning (msec)
-# If the one-minute median response time exceeds this value,
-# Squid prints a WARNING with debug level 0 to get the
-# administrators attention. The value is in milliseconds.
-#Default:
-# disabled.
-
-# TAG: high_page_fault_warning
-# If the one-minute average page fault rate exceeds this
-# value, Squid prints a WARNING with debug level 0 to get
-# the administrators attention. The value is in page faults
-# per second.
-#Default:
-# disabled.
-
-# TAG: high_memory_warning
-# Note: This option is only available if Squid is rebuilt with the
-# GNU Malloc with mstats()
-#
-# If the memory usage (as determined by gnumalloc, if available and used)
-# exceeds this amount, Squid prints a WARNING with debug level 0 to get
-# the administrators attention.
-#Default:
-# disabled.
-
-# TAG: sleep_after_fork (microseconds)
-# When this is set to a non-zero value, the main Squid process
-# sleeps the specified number of microseconds after a fork()
-# system call. This sleep may help the situation where your
-# system reports fork() failures due to lack of (virtual)
-# memory. Note, however, if you have a lot of child
-# processes, these sleep delays will add up and your
-# Squid will not service requests for some amount of time
-# until all the child processes have been started.
-# On Windows value less then 1000 (1 milliseconds) are
-# rounded to 1000.
-#Default:
-# sleep_after_fork 0
-
-# TAG: windows_ipaddrchangemonitor on|off
-# Note: This option is only available if Squid is rebuilt with the
-# MS Windows
-#
-# On Windows Squid by default will monitor IP address changes and will
-# reconfigure itself after any detected event. This is very useful for
-# proxies connected to internet with dial-up interfaces.
-# In some cases (a Proxy server acting as VPN gateway is one) it could be
-# desiderable to disable this behaviour setting this to 'off'.
-# Note: after changing this, Squid service must be restarted.
-#Default:
-# windows_ipaddrchangemonitor on
-
-# TAG: eui_lookup
-# Whether to lookup the EUI or MAC address of a connected client.
-#Default:
-# eui_lookup on
-
-# TAG: max_filedescriptors
-# Reduce the maximum number of filedescriptors supported below
-# the usual operating system defaults.
-#
-# Remove from squid.conf to inherit the current ulimit setting.
-#
-# Note: Changing this requires a restart of Squid. Also
-# not all I/O types supports large values (eg on Windows).
-#Default:
-# Use operating system limits set by ulimit.
-