reproducible: Add new armhf builder, jtx1c.

Signed-off-by: Holger Levsen <holger@layer-acht.org>

6 files changed, 315 insertions, 0 deletions

diff --git a/hosts/jtx1c-armhf-rb/etc/munin/munin-node.conf b/hosts/jtx1c-armhf-rb/etc/munin/munin-node.conf
new file mode 100644
index 00000000..f863b447
--- /dev/null
+++ b/hosts/jtx1c-armhf-rb/etc/munin/munin-node.conf
@@ -0,0 +1,66 @@
+#
+# Example config-file for munin-node
+#
+
+log_level 4
+log_file /var/log/munin/munin-node.log
+pid_file /var/run/munin/munin-node.pid
+
+background 1
+setsid 1
+
+user root
+group root
+
+# This is the timeout for the whole transaction.
+# Units are in sec. Default is 15 min
+#
+# global_timeout 900
+
+# This is the timeout for each plugin.
+# Units are in sec. Default is 1 min
+#
+# timeout 60
+
+# Regexps for files to ignore
+ignore_file [\#~]$
+ignore_file DEADJOE$
+ignore_file \.bak$
+ignore_file %$
+ignore_file \.dpkg-(tmp|new|old|dist)$
+ignore_file \.rpm(save|new)$
+ignore_file \.pod$
+
+# Set this if the client doesn't report the correct hostname when
+# telnetting to localhost, port 4949
+#
+#host_name localhost.localdomain
+
+# A list of addresses that are allowed to connect.  This must be a
+# regular expression, since Net::Server does not understand CIDR-style
+# network notation unless the perl module Net::CIDR is installed.  You
+# may repeat the allow line as many times as you'd like
+
+allow ^127\.0\.0\.1$
+allow ^::1$
+
+# If you have installed the Net::CIDR perl module, you can use one or more
+# cidr_allow and cidr_deny address/mask patterns.  A connecting client must
+# match any cidr_allow, and not match any cidr_deny.  Note that a netmask
+# *must* be provided, even if it's /32
+#
+# Example:
+#
+# cidr_allow 127.0.0.1/32
+# cidr_allow 192.0.2.0/24
+# cidr_deny  192.0.2.42/32
+
+# Which address to bind to;
+host *
+# host 127.0.0.1
+
+# And which port
+port 4949
+
+allow ^78\.137\.96\.196
+hostname jtx1c-armhf-rb.debian.net
diff --git a/hosts/jtx1c-armhf-rb/etc/munin/munin-node.conf~ b/hosts/jtx1c-armhf-rb/etc/munin/munin-node.conf~
new file mode 100644
index 00000000..2ebe8e40
--- /dev/null
+++ b/hosts/jtx1c-armhf-rb/etc/munin/munin-node.conf~
@@ -0,0 +1,66 @@
+#
+# Example config-file for munin-node
+#
+
+log_level 4
+log_file /var/log/munin/munin-node.log
+pid_file /var/run/munin/munin-node.pid
+
+background 1
+setsid 1
+
+user root
+group root
+
+# This is the timeout for the whole transaction.
+# Units are in sec. Default is 15 min
+#
+# global_timeout 900
+
+# This is the timeout for each plugin.
+# Units are in sec. Default is 1 min
+#
+# timeout 60
+
+# Regexps for files to ignore
+ignore_file [\#~]$
+ignore_file DEADJOE$
+ignore_file \.bak$
+ignore_file %$
+ignore_file \.dpkg-(tmp|new|old|dist)$
+ignore_file \.rpm(save|new)$
+ignore_file \.pod$
+
+# Set this if the client doesn't report the correct hostname when
+# telnetting to localhost, port 4949
+#
+#host_name localhost.localdomain
+
+# A list of addresses that are allowed to connect.  This must be a
+# regular expression, since Net::Server does not understand CIDR-style
+# network notation unless the perl module Net::CIDR is installed.  You
+# may repeat the allow line as many times as you'd like
+
+allow ^127\.0\.0\.1$
+allow ^::1$
+
+# If you have installed the Net::CIDR perl module, you can use one or more
+# cidr_allow and cidr_deny address/mask patterns.  A connecting client must
+# match any cidr_allow, and not match any cidr_deny.  Note that a netmask
+# *must* be provided, even if it's /32
+#
+# Example:
+#
+# cidr_allow 127.0.0.1/32
+# cidr_allow 192.0.2.0/24
+# cidr_deny  192.0.2.42/32
+
+# Which address to bind to;
+host *
+# host 127.0.0.1
+
+# And which port
+port 4949
+
+allow ^78\.137\.96\.196
+hostname jtx1b-armhf-rb.debian.net
diff --git a/hosts/jtx1c-armhf-rb/etc/munin/plugin-conf.d/df b/hosts/jtx1c-armhf-rb/etc/munin/plugin-conf.d/df
new file mode 100644
index 00000000..b3fdadcb
--- /dev/null
+++ b/hosts/jtx1c-armhf-rb/etc/munin/plugin-conf.d/df
@@ -0,0 +1,6 @@
+[df*]
+env.exclude none unknown iso9660 squashfs udf romfs ramfs debugfs devtmpfs sysfs
+env.exclude_re /srv/workspace/pbuilder /run /dev/disk/by /var/lib/schroot/mount /srv/workspace/varlibschroot /dev/shm /sys/fs/cgroup
+env.warning 92
+env.critical 98
+
diff --git a/hosts/jtx1c-armhf-rb/etc/munin/plugin-conf.d/diskstats b/hosts/jtx1c-armhf-rb/etc/munin/plugin-conf.d/diskstats
new file mode 100644
index 00000000..2d11f397
--- /dev/null
+++ b/hosts/jtx1c-armhf-rb/etc/munin/plugin-conf.d/diskstats
@@ -0,0 +1,4 @@
+[diskstats]
+env.trim_labels yes
+env.include_only /dev/sda
+
diff --git a/hosts/jtx1c-armhf-rb/etc/munin/plugin-conf.d/munin-node b/hosts/jtx1c-armhf-rb/etc/munin/plugin-conf.d/munin-node
new file mode 100644
index 00000000..e766928f
--- /dev/null
+++ b/hosts/jtx1c-armhf-rb/etc/munin/plugin-conf.d/munin-node
@@ -0,0 +1,117 @@
+# This file is used to configure how the plugins are invoked.
+# Place in /etc/munin/plugin-conf.d/ or corresponding directory.
+#
+# PLEASE NOTE: Changes in the plugin-conf.d directory are only
+# read at munin-node startup, so restart at any changes.
+#
+# user <user>         # Set the user to run the plugin as.
+# group <group>       # Set the group to run the plugin as.
+# command <command>   # Run <command> instead of the plugin. %c expands to
+#                       what would normally be run.
+# env.<variable> <value> # Sets <variable> in the plugin's environment, see the
+#                       individual plugins to find out which variables they
+#                       care about.
+
+
+[amavis]
+group adm
+env.MUNIN_MKTEMP /bin/mktemp -p /tmp/ $1
+env.amavislog /var/log/mail.info
+
+[apt]
+user root
+
+[courier_mta_mailqueue]
+group daemon
+
+[courier_mta_mailstats]
+group adm
+
+[courier_mta_mailvolume]
+group adm
+
+[cps*]
+user root
+
+[exim_mailqueue]
+group adm, (Debian-exim)
+
+[exim_mailstats]
+group adm, (Debian-exim)
+env.logdir /var/log/exim4/
+env.logname mainlog
+
+[fw_conntrack]
+user root
+
+[fw_forwarded_local]
+user root
+
+[hddtemp_smartctl]
+user root
+
+[hddtemp2]
+user root
+
+[if_*]
+user root
+
+[if_err_*]
+user nobody
+
+[ip_*]
+user root
+
+[ipmi_*]
+user root
+
+[mysql*]
+user root
+env.mysqlopts --defaults-file=/etc/mysql/debian.cnf
+env.mysqluser debian-sys-maint
+env.mysqlconnection DBI:mysql:mysql;mysql_read_default_file=/etc/mysql/debian.cnf
+
+[postfix_mailqueue]
+user postfix
+
+[postfix_mailstats]
+group adm
+
+[postfix_mailvolume]
+group adm
+env.logfile mail.log
+
+[smart_*]
+user root
+
+[vlan*]
+user root
+
+[ejabberd*]
+user ejabberd
+env.statuses available away chat xa
+env.days 1 7 30
+
+[dhcpd3]
+user root
+env.leasefile /var/lib/dhcp3/dhcpd.leases
+env.configfile /etc/dhcp3/dhcpd.conf
+
+[jmx_*]
+env.ip 127.0.0.1
+env.port 5400
+
+[samba]
+user root
+
+[munin_stats]
+user munin
+group munin
+
+[postgres_*]
+user postgres
+env.PGUSER postgres
+env.PGPORT 5432
+
+[fail2ban]
+user root
diff --git a/hosts/jtx1c-armhf-rb/etc/munin/plugins/jenkins_reproducible_builds b/hosts/jtx1c-armhf-rb/etc/munin/plugins/jenkins_reproducible_builds
new file mode 100755
index 00000000..e990c127
--- /dev/null
+++ b/hosts/jtx1c-armhf-rb/etc/munin/plugins/jenkins_reproducible_builds
@@ -0,0 +1,56 @@
+#!/bin/sh
+# -*- sh -*-
+
+: << =cut
+
+=head1 NAME
+
+jenkins_reproducible_builds - Plugin to measure number of reproducible builds running
+
+=head1 AUTHOR
+
+Contributed by Holger Levsen
+
+=head1 LICENSE
+
+GPLv2
+
+=head1 MAGIC MARKERS
+
+ #%# family=auto
+ #%# capabilities=autoconf
+
+=cut
+
+. $MUNIN_LIBDIR/plugins/plugin.sh
+
+if [ "$1" = "autoconf" ]; then
+	echo yes
+	exit 0
+fi
+
+JOB_PREFIXES="first second"
+if [ "$1" = "config" ]; then
+	echo 'graph_title Concurrent reproducible builds running'
+	echo 'graph_args --base 1000 -l 0 '
+	echo 'graph_scale no'
+	echo 'graph_total total'
+	echo 'graph_vlabel Concurrent reproducible builds running'
+	echo 'graph_category jenkins'
+	draw=AREA
+	for PREFIX in $JOB_PREFIXES ; do
+		echo "jenkins_reproducible_${PREFIX}_build.label $PREFIX build"
+		echo "jenkins_reproducible_${PREFIX}_build.draw $draw"
+		if [ "$draw" = "AREA" ] ; then draw=STACK ; fi
+	done
+	exit 0
+fi
+
+for PREFIX in $JOB_PREFIXES ; do
+	if [ "$PREFIX" = "first" ] ; then
+		NR=$(pgrep -fc "bin/bash /srv/jenkins/bin/reproducible_build.sh 1")
+	else
+		NR=$(pgrep -fc "bin/bash /srv/jenkins/bin/reproducible_build.sh 2")
+	fi
+	echo "jenkins_reproducible_${PREFIX}_build.value $NR"
+	done