Desktop Entry Specification Version 1.1-draft 4 Mar 2008 Preston Brown
pbrown@kde.org
Jonathan Blandford
jrb@redhat.com
Owen Taylor
otaylor@gtk.org
Vincent Untz
vuntz@gnome.org
Waldo Bastian
waldo.bastian@intel.com
Ryan Lortie
desrt@desrt.ca
Introduction Both the KDE and GNOME desktop environments have adopted a similar format for "desktop entries", or configuration files describing how a particular program is to be launched, how it appears in menus, etc. It is to the larger community's benefit that a unified standard be agreed upon by all parties such that interoperation between the two environments, and indeed any additional environments that implement the specification, becomes simpler. Basic format of the file Desktop entry files should have the .desktop extension, except for files of Type Directory which should have the .directory extension. Determining file type on basis of extension makes determining the file type very easy and quick. When no file extension is present, the desktop system should fall back to recognition via "magic detection". For applications, the part of the name of the desktop file (before the .desktop) should follow the "reverse DNS" convention, e.g. org.example.FooViewer.desktop. Desktop entry files are encoded in UTF-8. A file is interpreted as a series of lines that are separated by linefeed characters. Case is significant everywhere in the file. Compliant implementations MUST not remove any fields from the file, even if they don't support them. Such fields must be maintained in a list somewhere, and if the file is "rewritten", they will be included. This ensures that any desktop-specific extensions will be preserved even if another system accesses and changes the file. Comments Lines beginning with a # and blank lines are considered comments and will be ignored, however they should be preserved across reads and writes of the desktop entry file. Comment lines are uninterpreted and may contain any character (except for LF). However, using UTF-8 for comment lines that contain characters not in ASCII is encouraged. Group headers A group header with name groupname is a line in the format: [groupname] Group names may contain all ASCII characters except for [ and ] and control characters. Multiple groups may not have the same name. All {key,value} pairs following a group header until a new group header belong to the group. The basic format of the desktop entry file requires that there be a group header named Desktop Entry. There may be other groups present in the file, but this is the most important group which explicitly needs to be supported. This group should also be used as the "magic key" for automatic MIME type detection. There should be nothing preceding this group in the desktop entry file but possibly one or more comments. Entries Entries in the file are {key,value} pairs in the format: Key=Value Space before and after the equals sign should be ignored; the = sign is the actual delimiter. Only the characters A-Za-z0-9- may be used in key names. As the case is significant, the keys Name and NAME are not equivalent. Multiple keys in the same group may not have the same name. Keys in different groups may have the same name. Possible value types The value types recognized are string, localestring, boolean, and numeric. Values of type string may contain all ASCII characters except for control characters. Values of type localestring are user displayable, and are encoded in UTF-8. Values of type boolean must either be the string true or false. Values of type numeric must be a valid floating point number as recognized by the %f specifier for scanf in the C locale. The escape sequences \s, \n, \t, \r, and \\ are supported for values of type string and localestring, meaning ASCII space, newline, tab, carriage return, and backslash, respectively. Some keys can have multiple values. In such a case, the value of the key is specified as a plural: for example, string(s). The multiple values should be separated by a semicolon, and the value of the key should have a semicolon as trailing character. Semicolons in these values need to be escaped using \;. Localized values for keys Keys with type localestring may be postfixed by [LOCALE], where LOCALE is the locale type of the entry. LOCALE must be of the form lang_COUNTRY.ENCODING@MODIFIER, where _COUNTRY, .ENCODING, and @MODIFIER may be omitted. If a postfixed key occurs, the same key must be also present without the postfix. When reading in the desktop entry file, the value of the key is selected by matching the current POSIX locale for the LC_MESSAGES category against the LOCALE postfixes of all occurrences of the key, with the .ENCODING part stripped. The matching is done as follows. If LC_MESSAGES is of the form lang_COUNTRY.ENCODING@MODIFIER, then it will match a key of the form lang_COUNTRY@MODIFIER. If such a key does not exist, it will attempt to match lang_COUNTRY followed by lang@MODIFIER. Then, a match against lang by itself will be attempted. Finally, if no matching key is found the required key without a locale specified is used. The encoding from the LC_MESSAGES value is ignored when matching. If LC_MESSAGES does not have a MODIFIER field, then no key with a modifier will be matched. Similarly, if LC_MESSAGES does not have a COUNTRY field, then no key with a country specified will be matched. If LC_MESSAGES just has a lang field, then it will do a straight match to a key with a similar value. The following table lists possible matches of various LC_MESSAGES values in the order in which they are matched. Note that the ENCODING field isn't shown. Locale Matching LC_MESSAGES value Possible keys in order of matching lang_COUNTRY@MODIFIER lang_COUNTRY@MODIFIER, lang_COUNTRY, lang@MODIFIER, lang, default value lang_COUNTRY lang_COUNTRY, lang, default value lang@MODIFIER lang@MODIFIER, lang, default value lang lang, default value
For example, if the current value of the LC_MESSAGES category is sr_YU@Latn and the desktop file includes: Name=Foo Name[sr_YU]=... Name[sr@Latn]=... Name[sr]=... then the value of the Name keyed by sr_YU is used.
Recognized desktop entry keys Keys are either OPTIONAL or REQUIRED. If a key is OPTIONAL it may or may not be present in the file. However, if it isn't, the implementation of the standard should not blow up, it must provide some sane defaults. Some keys only make sense in the context when another particular key is also present and set to a specific value. Those keys should not be used if the particular key is not present or not set to the specific value. For example, the Terminal key can only be used when the value of the Type key is Application. If a REQUIRED key is only valid in the context of another key set to a specific value, then it has to be present only if the other key is set to the specific value. For example, the URL key has to be present when and only when when the value of the Type key is Link. Some example keys: Name[C], Comment[it]. Standard Keys Key Description Value Type REQ? Type Type This specification defines 3 types of desktop entries: Application (type 1), Link (type 2) and Directory (type 3). To allow the addition of new types in the future, implementations should ignore desktop entries with an unknown type. string YES Version Version of the Desktop Entry Specification that the desktop entry conforms with. Entries that confirm with this version of the specification should use 1.0. Note that the version field is not required to be present. string NO 1-3 Name Specific name of the application, for example "Mozilla". localestring YES 1-3 GenericName Generic name of the application, for example "Web Browser". localestring NO 1-3 NoDisplay NoDisplay means "this application exists, but don't display it in the menus". This can be useful to e.g. associate this application with MIME types, so that it gets launched from a file manager (or other apps), without having a menu entry for it (there are tons of good reasons for this, including e.g. the netscape -remote, or kfmclient openURL kind of stuff). boolean NO 1-3 Comment Tooltip for the entry, for example "View sites on the Internet". The value should not be redundant with the values of Name and GenericName. localestring NO 1-3 Icon Icon to display in file manager, menus, etc. If the name is an absolute path, the given file will be used. If the name is not an absolute path, the algorithm described in the Icon Theme Specification will be used to locate the icon. localestring NO 1-3 Hidden Hidden should have been called Deleted. It means the user deleted (at his level) something that was present (at an upper level, e.g. in the system dirs). It's strictly equivalent to the .desktop file not existing at all, as far as that user is concerned. This can also be used to "uninstall" existing files (e.g. due to a renaming) - by letting make install install a file with Hidden=true in it. boolean NO 1-3 OnlyShowIn, NotShowIn A list of strings identifying the environments that should display/not display a given desktop entry. Only one of these keys, either OnlyShowIn or NotShowIn, may appear in a group (for possible values see the Desktop Menu Specification). string(s) NO 1-3 DBusActivatable A boolean value specifying if D-Bus activation is supported for this application. If this key is missing, the default value is false. If the value is true then implementations should ignore the Exec key and send a D-Bus message to launch the application. See D-Bus Activation for more information on how this works. Applications should still include Exec= lines in their desktop files for compatibility with implementations that do not understand the DBusActivatable key. boolean NO TryExec Path to an executable file on disk used to determine if the program is actually installed. If the path is not an absolute path, the file is looked up in the $PATH environment variable. If the file is not present or if it is not executable, the entry may be ignored (not be used in menus, for example). string NO 1 Exec Program to execute, possibly with arguments. See the Exec key for details on how this key works. The Exec key is required if DBusActivatable is not set to true. Even if DBusActivatable is true, Exec should be specified for compatibility with implementations that do not understand DBusActivatable. string NO 1 Path If entry is of type Application, the working directory to run the program in. string NO 1 Terminal Whether the program runs in a terminal window. boolean NO 1 Actions Identifiers for application actions. This can be used to tell the application to make a specific action, different from the default behavior. The Application actions section describes how actions work. string(s) NO 1 MimeType The MIME type(s) supported by this application. string(s) NO 1 Categories Categories in which the entry should be shown in a menu (for possible values see the Desktop Menu Specification). string(s) NO 1 Keywords A list of strings which may be used in addition to other metadata to describe this entry. This can be useful e.g. to facilitate searching through entries. The values are not meant for display, and should not be redundant with the values of Name or GenericName. localestring(s) NO 1 StartupNotify If true, it is KNOWN that the application will send a "remove" message when started with the DESKTOP_STARTUP_ID environment variable set. If false, it is KNOWN that the application does not work with startup notification at all (does not shown any window, breaks even when using StartupWMClass, etc.). If absent, a reasonable handling is up to implementations (assuming false, using StartupWMClass, etc.). (See the Startup Notification Protocol Specification for more details). boolean NO 1 StartupWMClass If specified, it is known that the application will map at least one window with the given string as its WM class or WM name hint (see the Startup Notification Protocol Specification for more details). string NO 1 URL If entry is Link type, the URL to access. string YES 2
The <varname>Exec</varname> key The Exec key must contain a command line. A command line consists of an executable program optionally followed by one or more arguments. The executable program can either be specified with its full path or with the name of the executable only. If no full path is provided the executable is looked up in the $PATH environment variable used by the desktop environment. The name or path of the executable program may not contain the equal sign ("="). Arguments are separated by a space. Arguments may be quoted in whole. If an argument contains a reserved character the argument must be quoted. The rules for quoting of arguments is also applicable to the executable name or path of the executable program as provided. Quoting must be done by enclosing the argument between double quotes and escaping the double quote character, backtick character ("`"), dollar sign ("$") and backslash character ("\") by preceding it with an additional backslash character. Implementations must undo quoting before expanding field codes and before passing the argument to the executable program. Reserved characters are space (" "), tab, newline, double quote, single quote ("'"), backslash character ("\"), greater-than sign (">"), less-than sign ("<"), tilde ("~"), vertical bar ("|"), ampersand ("&"), semicolon (";"), dollar sign ("$"), asterisk ("*"), question mark ("?"), hash mark ("#"), parenthesis ("(") and (")") and backtick character ("`"). Note that the general escape rule for values of type string states that the backslash character can be escaped as ("\\") as well and that this escape rule is applied before the quoting rule. As such, to unambiguously represent a literal backslash character in a quoted argument in a desktop entry file requires the use of four successive backslash characters ("\\\\"). Likewise, a literal dollar sign in a quoted argument in a desktop entry file is unambiguously represented with ("\\$"). A number of special field codes have been defined which will be expanded by the file manager or program launcher when encountered in the command line. Field codes consist of the percentage character ("%") followed by an alpha character. Literal percentage characters must be escaped as %%. Deprecated field codes should be removed from the command line and ignored. Field codes are expanded only once, the string that is used to replace the field code should not be checked for field codes itself. Command lines that contain a field code that is not listed in this specification are invalid and must not be processed, in particular implementations may not introduce support for field codes not listed in this specification. Extensions, if any, should be introduced by means of a new key. Implementations must take care not to expand field codes into multiple arguments unless explicitly instructed by this specification. This means that name fields, filenames and other replacements that can contain spaces must be passed as a single argument to the executable program after expansion. Although the Exec key is defined to have a value of the type string, which is limited to ASCII characters, field code expansion may introduce non-ASCII characters in arguments. Implementations must take care that all characters in arguments passed to the executable program are properly encoded according to the applicable locale setting. Recognized field codes are as follows: Code Description %f A single file name, even if multiple files are selected. The system reading the desktop entry should recognize that the program in question cannot handle multiple file arguments, and it should should probably spawn and execute multiple copies of a program for each selected file if the program is not able to handle additional file arguments. If files are not on the local file system (i.e. are on HTTP or FTP locations), the files will be copied to the local file system and %f will be expanded to point at the temporary file. Used for programs that do not understand the URL syntax. %F A list of files. Use for apps that can open several local files at once. Each file is passed as a separate argument to the executable program. %u A single URL. Local files may either be passed as file: URLs or as file path. %U A list of URLs. Each URL is passed as a separate argument to the executable program. Local files may either be passed as file: URLs or as file path. %d Deprecated. %D Deprecated. %n Deprecated. %N Deprecated. %i The Icon key of the desktop entry expanded as two arguments, first --icon and then the value of the Icon key. Should not expand to any arguments if the Icon key is empty or missing. %c The translated name of the application as listed in the appropriate Name key in the desktop entry. %k The location of the desktop file as either a URI (if for example gotten from the vfolder system) or a local filename or empty if no location is known. %v Deprecated. %m Deprecated. A command line may contain at most one %f, %u, %F or %U field code. If the application should not open any file the %f, %u, %F and %U field codes must be removed from the command line and ignored. Field codes must not be used inside a quoted argument, the result of field code expansion inside a quoted argument is undefined. The %F and %U field codes may only be used as an argument on their own. D-Bus Activation Applications that support being launched by D-Bus must implement the following interface (given in D-Bus introspection XML format): ]]> The application must name its desktop file in accordance with the naming recommendations in the introduction section (e.g. the filename must be like org.example.FooViewer.desktop). The application must have a D-Bus service activatable at the well-known name that is equal to the desktop file name with the .desktop portion removed (for our example, org.example.FooViewer). The above interface must be implemented at an object path determined as follows: starting with the well-known D-Bus name of the application, change all dots to slashes and prefix a slash. For our example, this is /org/example/FooViewer. The Activate method is called when the application is started without files to open. The Open method is called when the application is started with files. The array of strings is an array of URIs, in UTF-8. The ActivateAction method is called when Desktop Actions are activated. The action-name parameter is the name of the action. All methods take a platform-data argument that is used in a similar way to how environment variables might be used. Currently, only one field is defined by the specification: desktop-startup-id. This should be a string of the same value as would be stored in the DESKTOP_STARTUP_ID environment variable, as specified by the Startup Notification Protocol Specification. Registering MIME Types The MimeType key is used to indicate the MIME Types that an application knows how to handle. It is expected that for some applications this list could become long. An application is expected to be able to reasonably open files of these types using the command listed in the Exec key. There should be no priority for MIME Types in this field, or any form of priority in the desktop file. Priority for applications is handled external to the .desktop files. Additional applications actions Desktop entries of type Application can include one or more actions. An action represents an additional way to invoke the application. Application launchers should expose them to the user (for example, as a submenu) within the context of the application. This is used to build so called "Quicklists" or "Jumplists". Action identifier Each action is identified by a string, following the same format as key names (see ). Each identifier is associated with an action group that must be present in the .desktop file. The action group is a group named Desktop Action %s, where %s is the action identifier. It is not valid to have an action group for an action identifier not mentioned in the Actions key. Such an action group must be ignored by implementors. Action keys The following keys are supported within each action group. If a REQUIRED key is not present in an action group, then the implementor should ignore this action. Action Specific Keys Key Description Value Type REQ? Name Label that will be shown to the user. Since actions are always shown in the context of a specific application (that is, as a submenu of a launcher), this only needs to be unambiguous within one application and should not include the application name. localestring YES Icon Icon to be shown togheter with the action. If the name is an absolute path, the given file will be used. If the name is not an absolute path, the algorithm described in the Icon Theme Specification will be used to locate the icon. Implementations may choose to ignore it. localestring NO Exec Program to execute for this action, possibly with arguments. See the Exec key for details on how this key works. The Exec key is required if DBusActivatable is not set to true in the main desktop entry group. Even if DBusActivatable is true, Exec should be specified for compatibility with implementations that do not understand DBusActivatable. string NO
Implementation notes Application actions should be supported by implementors. However, in case they are not supported, implementors can simply ignore the Actions key and the associated Desktop Action action groups, and keep using the Desktop Entry group: the primary way to describe and invoke the application is through the Name, Icon and Exec keys from the Desktop Entry group. It is not expected that other desktop components showing application lists (software installers, for instance) will provide any user interface for these actions. Therefore applications must only include actions that make sense as general launchers.
Extending the format If the standard is to be amended with a new {key,value} pair which should be applicable to all supporting parties, a group discussion will take place. This is the preferred method for introducing changes. If one particular party wishes to add a field for personal use, they should prefix the key with the string X-PRODUCT, e.g. X-NewDesktop-Foo, following the precedent set by other IETF and RFC standards. Alternatively, fields can be placed in their own group, where they may then have arbitrary key names. If this is the case, the group should follow the scheme outlined above, i.e. [X-PRODUCT GROUPNAME] or something similar. These steps will avoid namespace clashes between different yet similar environments. Example Desktop Entry File [Desktop Entry] Version=1.0 Type=Application Name=Foo Viewer Comment=The best viewer for Foo objects available! TryExec=fooview Exec=fooview %F Icon=fooview MimeType=image/x-foo; Actions=Gallery;Create; [Desktop Action Gallery] Exec=fooview --gallery Name=Browse Gallery [Desktop Action Create] Exec=fooview --create-new Name=Create a new Foo! Icon=fooview-new Currently reserved for use within KDE For historical reasons KDE is using some KDE-specific extensions that are currently not prefixed by a X-KDE- prefix. KDE specific keys: ServiceTypes, DocPath, InitialPreference KDE specific types: ServiceType, Service and FSDevice KDE also used the Keywords key before it was standardized, using commas instead of semi-colons as separators. At the time of standardization, the field had been prefixed with a X-KDE prefix, but the Trinity fork still used the non-prefixed variant. KDE uses the following additional keys for desktop entries of the FSDevice type. FSDevice Specific Keys Key Description Value Type Dev The device to mount. string FSType The type of file system to try to mount. string MountPoint The mount point of the device in question. string ReadOnly Specifies whether or not the device is read only. boolean UnmountIcon Icon to display when device is not mounted. Mounted devices display icon from the Icon key. localestring
Deprecated Items As this standard is quite old there are some deprecated items that may or may not be used by several implementations. Type=MimeType is deprecated as there is a new standard for this now, see the Shared MIME-info Database specification for more information. In consequence the Keys Patterns (various file name extensions associated with the MIME type) and DefaultApp (the default application associated with this MIME type) are also deprecated. Using .kdelnk instead of .desktop as the file extension is deprecated. Using [KDE Desktop Entry] instead of [Desktop Entry] as header is deprecated. The Encoding key is deprecated. It was used to specify whether keys of type localestring were encoded in UTF-8 or in the specified locale. Possible values are UTF-8 and Legacy-Mixed. See for more details. Deprecated Exec field codes: %m (the mini-icon associated with the desktop entry, this should be expanded as two arguments, --miniicon and the content of the MiniIcon key, it can also be ignored by expanding it to no arguments), %v (the device as listed in the Dev key in the desktop file), %d (the directory of a file), %D (the directories of files), %n (the base name of a file) and %N (the base names of files). Deprecated keys: MiniIcon (small icon for menus, etc.), TerminalOptions (if the program runs in a terminal, any options that should be passed to the terminal emulator before actually executing the program), Protocols, Extensions, BinaryPattern, MapNotify. The SwallowTitle and SwallowExec keys are deprecated. The SwallowTitle key is of type localestring and specifies the title of the window if is swallowed onto the panel. The SwallowExec key is of type string and specifies the program to exec if swallowed app is clicked. The SortOrder key is deprecated. It is of type string(s) and may be used to specify the order in which to display files. The Desktop Menu Specification defines another mechanism for defining the order of menu items. The FilePattern key is deprecated. The value is a list of regular expressions to match against for a file manager to determine if this entry's icon should be displayed. Usually simply the name of the main executable and friends. Historically some booleans have been represented by the numeric entries 0 or 1. With this version of the standard they are now to be represented as a boolean string. However, if an implementation is reading a pre-1.0 desktop entry, it should interpret 0 and 1 as false and true, respectively. Historically lists have been comma separated. This is inconsistent with other lists which are separated by a semicolon. When reading a pre-1.0 desktop entry, comma separated lists should continue to be supported. The <constant>Legacy-Mixed</constant> Encoding (Deprecated) The Legacy-Mixed encoding corresponds to the traditional encoding of desktop files in older versions of the GNOME and KDE desktop files. In this encoding, the encoding of each localestring key is determined by the locale tag for that key, if any, instead of being UTF-8. For keys without a locale tag, the value must contain only ASCII characters. If the file specifies an unsupported encoding, the implementation should either ignore the file, or, if the user has requested a direct operation on the file (such as opening it for editing), display an appropriate error indication to the user. In the absence of an Encoding key, the implementation may choose to autodetect the encoding of the file by using such factors as: The location of the file on the file system Whether the contents of the file are valid UTF-8 If the implementation does not perform such auto-detection, it should treat a file without an Encoding key in the same way as a file with an unsupported Encoding key. If the locale tag includes an .ENCODING part, then that determines the encoding for the line. Otherwise, the encoding is determined by the language, or lang_COUNTRY pair from the locale tag, according to the following table. Encoding Aliases Tags ARMSCII-8 (*)hy BIG5zh_TW CP1251be bg EUC-CNGB2312zh_CN EUC-JPja EUC-KRko GEORGIAN-ACADEMY (*) GEORGIAN-PS (*)ka ISO-8859-1br ca da de en es eu fi fr gl it nl no pt sv wa ISO-8859-2cs hr hu pl ro sk sl sq sr ISO-8859-3 eo ISO-8859-5mk sp ISO-8859-7el ISO-8859-9tr ISO-8859-13lt lv mi ISO-8859-14cy ga ISO-8859-15et KOI8-Rru KOI8-Uuk TCVN-5712 (*)TCVNvi TIS-620th VISCII Encoding The name given here is listed here is typically the canonical name for the encoding in the GNU C Library's iconv facility. Encodings marked with (*) are not currently supported by the GNU C Library; for this reason, implementations may choose to ignore lines in desktop files that resolve to this encoding. Desktop files with these encodings are currently rare or non-existent. Aliases Other names for the encoding found in existing desktop files. Tags Language tags for which this is the default encoding. This table above covers all tags and encodings that are known to be currently in use. Implementors may choose to support encodings not in the above set. For tags without defaults listed in the above table, desktop file creators must specify the .ENCODING part of the locale tag. Matching the .ENCODING part of the locale tag against a locale name or alias should be done by stripping all punctuation characters from both the tag and the name or alias, converting both name and alias to lowercase, and comparing the result. This is necessary because, for example, Big5 is frequently found instead of BIG5 and georgianacademy instead of GEORGIAN-ACADEMY. Desktop files creators should, however, use the name as it appears in the "Encoding" column above.