summaryrefslogtreecommitdiffstats
path: root/test
AgeCommit message (Collapse)AuthorFilesLines
2013-03-07libalpm: Search for replacers before literalsOlivier Brunel3-4/+19
Since 882bff36 literals would be searched before replacers, resulting in a package being replaced by another not actually being replaced under certain conditions (e.g. they're both in the same repo). This change effectively reversed the expectations in test sync132. This patch switches the order back to replacers first, thus making sure if a package is replacing another one, the change will always happen, even if both are in the same repo. Note that a package replacing another one in a repo with higher priority will not be done, see FS#11737 and test sync1105 Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07libalpm: Fix installing update of a replaced packageOlivier Brunel1-0/+18
During a sysupgrade, if a package is replaced by another, and an update for the former package is found (on another repo) the replaced package would be re-installed. Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07fix typos in pacman testsAndrew Gregory3-4/+4
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-24Perform limited conflict checking with --forceAllan McRae1-2/+0
Pacman currently bails when trying to extract a file over a directory when using --force. Instead of ignoring all conflict, perform the check and skip any file-file conflicts. Conflicts between directories and files are still flagged and cause the transation to abort. As a bonus, we now know about files changing packages when using --force, so we can skip removing them fixing upgrade046. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-24use resolved_path for filelist_containsAndrew Gregory1-2/+0
alpm_filelist_contains was being used to search for resolved paths, but searching in the unresolved paths, causing it to miss matches. We always search unresolved paths and search the resolved paths if available because _alpm_filelist_resolve is not public and requires a context handle, so it can't be called from alpm_filelist_contains. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-24return resolved paths from filelist_differenceAndrew Gregory2-4/+0
We were comparing files based on resolved paths but returning the original file_t structures, which were not necessarily in the same order. The extra file_t information was only being used to determine if the file was a directory which can be accomplished by testing for a trailing slash, so just return the resolved path. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-24return resolved paths from filelist_intersectionAndrew Gregory1-2/+0
We were comparing files based on resolved paths but returning the original file_t structures, which were not necessarily in the same order. The additional file_t information was never used, so just return the resolved path. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-24add fileconflict tests for cases with symlinksAndrew Gregory4-0/+80
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-16pmtest: install filesystem entries before packagesAndrew Gregory1-3/+3
Installing filesystem entries first allows the filesystem to provide a symlink to a directory. Packages will then be able to use the symlink as if it were a directory instead of causing an error. For example: self.filesystem = ["dir/", "link -> dir/"] pkg = pmpkg("pkg1") pkg.files = ["link/file"] self.addpkg2db("local", pkg) Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-07Document fakeroot and fakechroot as dependenciesChirantan Ekbote1-0/+8
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-07Remove outdated instructions in pactest READMEAllan McRae1-15/+0
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-07Remove conditional checks for fakechroot from test filesChirantan Ekbote2-8/+0
We don't want test files to do any checks for fakechroot since we will print a warning if it is not found. Signed-off-by: Chirantan Ekbote <chirantan.ekbote@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-07Print a warning if fakechroot is not foundChirantan Ekbote1-1/+3
Fixes FS#33551. Signed-off-by: Chirantan Ekbote <chirantan.ekbote@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-07make test/scripts/human_to_size.sh executableAndrew Gregory1-0/+0
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-28pacsort: add -f, --files option for sorting filenamesDave Reisner1-0/+18
Teach pacsort to understand package filenames and optionally strip away some of the context. alpm_pkg_vercmp() intentionally only understands pure versions, so strings such as '18.0-2-x86_64' and '18.0.1-1-x86_64' will be compared wrongly. Partially addresses FS#33455. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-28Make path to ldconfig configurableAllan McRae2-3/+8
The FHS (2.3) says having ldconfig in /sbin is optional and it is usually located in /usr/sbin. So /sbin/ldconfig should not be hard coded in pacman. Instead, provide a configure option --with-ldconfig that defaults to the current path. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-28Remove leading / for pactest pathsAllan McRae4-4/+4
The leading / makes the pactest suite look for the file in the users filesystem. This meant the ldconfig tests always passed (even when broken in pacman...). Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-28pactest: handle non-default scriptlet shellsAllan McRae8-3/+20
pacman can be configured to use a different shell than /bin/sh for scriplets. Pass the cnfigured value to the pactest suite and make the necessary "copy" of the shell in the test root. Also update all copyright years in the pactest suite. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-28Revert execvp and related commitsAllan McRae3-25/+3
This reverts commit 4a8c2852a887d2b1aaa43be3071ab586eb24b9e3. This reverts commit 993700bc6b12cd291544d2a22845f480e8a7925e. This reverts commit bb4d2b72c1d35ab9d65d632be0dcaf00cfa7d600. This reverts commit 60b192e3836a150eb6950ce52241efebbee00f11. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-17pmtest: resolve path to scriptlet shellAllan McRae3-3/+25
In order to support a variety of values for the --with-scriptlet-shell configure flag, pmtest has to be aware of what kind of path was passed, be it an absolute path or a fragment for a path lookup. For absolute paths, leave the path alone. For fragments, search the PATH environment var for the resolved path to the binary. In both cases, join the resultant path to the root directory defined for the test, not a pre-determined bin directory. Fixes FS#31552. With-contribution-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-04Save backup files with extension .pacsave.nPang Yan Han1-0/+20
Teach pacman to save backup files with extension .pacsave.n, where n is a positive integer. The current backup file shall be saved as <name>.pacsave, while existing .pacsave.n files will be renamed to <name>.pacsave.n+1 Example: 1. You have subversion installed in your local repo. /etc/conf.d/svnserve is a file to be backed up. It contains local modifications 2. You remove subversion from your repo. /etc/conf.d/svnserve is backed up as /etc/conf.d/svnserve.pacsave 2. You install subversion again 3. You edit /etc/conf.d/svnserve 4. You remove subversion. The existing /etc/conf.d/svnserve.pacsave is renamed to /etc/conf.d/svnserve.pacsave.1 and /etc/conf.d/svnserve is backed up as /etc/conf.d/svnserve.pacsave Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Rebased from original email and adjusted for util-common usage. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14Add pactest for "Optional for" outputBenedikt Morbach1-0/+13
Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14Add pactests for displaying optdep installation statusBenedikt Morbach2-0/+27
Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14It turns out we do care about directories...Allan McRae2-4/+0
This is a bug that has been around since at least 2007. On a package upgrade (either by -S or -U) a new directory could overwrite any file. This is caused by the filelist difference calculation ignoring all directories and thus no new directories were checked for conflicting files on the filesystem. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14Add pactests for not detecting directory conflicts with upgradesFlorian Pritz2-0/+38
Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14Fix overzealous package removal with unmet dependenciesAndrew Gregory3-6/+0
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> [Allan: Remove expected failure from fixed pactests] Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14pactest: variant of package removal due to unmet dependenciesAllan McRae1-0/+28
Duplicate of sync140.py but with the alphabetical ordering of the packages changed. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14pactest: removal of packages with unmet dependenciesAllan McRae1-0/+28
Provide a package for removing packages with unmet dependencies. Currently pacman removes too many packages from the transaction (FS#30649). Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14Avoid upgrade conflict with unchanged effective pathAllan McRae1-2/+0
This applies to a case such as when /lib is a symlink to /usr/lib. If a package is installed which contains /lib/libfoo.so, pacman will complain if this package is then "fixed" to contain /usr/lib/libfoo.so. Since these have the same effective path and it exists within the same package, ignore the conflict. Fixes FS#30681. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14Resolve file paths during inter-package conflict checkAllan McRae3-4/+26
File paths are resolved if necessary during inter-package conflict checks so that packages carrying the same effective file due to directory symlinks on the filesystem are flagged as conflicting. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14Detect inter-package conflicts between files and directoriesAllan McRae2-4/+0
Detect a conflict between a file/symlink in one package and a directory in another when both are being installed at once. A side effect is the creation of conflicts between a directory symlink and a real directory (e.g lib -> usr/lib in pkg1 and /lib in pkg2). Given we can not guarantee pkg1 is installed before pkg2, this is a genuine conflict. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14pactest: Provide a full filelist to the pactests that need itAllan McRae2-4/+11
It turns out when you set the filelist for a package to include "usr/lib/foo" in the pactest suite, it thinks there is only the file "usr/lib/foo" in there... No "usr/" or "usr/lib/" directory. This makes life difficult when testing code that scrolls through a filelist looking for directory entries. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-09-18Merge branch 'maint'Dan McGee1-1/+4
2012-09-18pactest: allow running with valgrind from any directoryAllan McRae1-1/+4
When using the --valgrind flag with the pactest.py script, the path to the suppression file relies on the script being called from the source root directory. Construct the path from the scripts location to allow it to be called from directory. Dan: style cleanup. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-08-07fixed typoBarbu Paul - Gheorghe1-1/+1
Signed-off-by: Barbu Paul - Gheorghe <barbu.paul.gheorghe@gmail.com>
2012-08-02pactest: avoid upgrade conflict with unchanged effective pathDave Reisner1-0/+22
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-08-02pactest: Do not remove symlink to directory if a to be installed package uses itAllan McRae2-0/+44
If a pacakge has a directory symlink (e.g. /lib -> usr/lib), do not allow it to be removed if any other package is trying to install a file into that path (e.g. /lib/foo). This is because the local database can become invalidated if the symlink is removed after the package with file /lib/foo is installed (sync702.py). If the symlink is removed before the file is installed (sync701.py), the upgrade is actually a success, but we can not guarantee the ordering so both cases should fail. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-08-02pactest: Do not remove symlink to directory if local package uses that pathAllan McRae1-0/+22
If we have a symlink to a directory (e.g. /lib -> usr/lib), then we can not remove it if a local package thinks it has files in the symlink directory (e.g. /lib/foo), because this will invalidate the local file database. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-08-02pactest: conflict between files having same effective pathAllan McRae1-0/+23
Note failure to detect a conflict between files having the same effective path across packages due to a directory symlink. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-08-02pactest: conflict between directory and a fileAllan McRae1-0/+17
Note failure to detect a conflict between a directory in one package and a file in the other when the directory is not currently on the filesystem. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-08-02Add pactest for empty subdirectory conflictAllan McRae2-1/+18
The wrong test file was inadvertantly committed in 44e9fdd0. Add the correct test and tidy up the test which was committed. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-07-10Merge branch 'maint'Dan McGee3-0/+57
Conflicts: etc/makepkg.conf.in
2012-07-10Check empty subdirectory ownershipAllan McRae1-0/+17
When checking if a package owns a directory, it is important to check not only that all the files in the directory are part of the package, but also if the directory is part of a package. This catches empty subdirectories during conflict checking for directory to file/symlink replacements. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-07-10Add conflict for replacing owned empty directoryAllan McRae2-0/+40
When two packages own an empty directory, pacman finds no conflict when one of those packages wants to replace the directory with a file or a symlink. When it comes to actually extracting the new file/symlink, pacman sees the directory is still there (we do not remove empty directories if they are owned by a package) and refuses to extract. Detect this potential conflict early and bail. Note that it is a _potential_ conflict and not a guaranteed one as the other package owning the directory could be updated or removed first which would remove the conflict. However, pacman currently can not sort package installation order to ensure this, so this conflict requires manual upgrade ordering. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-06-25Scripts testsuite output consistencyAllan McRae2-4/+4
Signed-off-by: Allan McRae <allan@archlinux.org>
2012-06-25scripts/library: add human_to_sizeDave Reisner2-1/+77
This is a bash wrapper around an awk function that parses human readable sizes and returns their representative values in bytes, as a string. A small test harness is added to validate the functionality. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-06-25query: avoid false ownership matches for files in rootDave Reisner1-0/+11
Check for an exact match when querying ownership of files in the root. Previously, our test was too simple and would match the the basename of package files against the query parameter, e.g. $ pacman -Qo config /config is owned by cower-git 20120614-1 Adds a new test to verify this behavior, query007.py. Fixes FS#30388. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-24scripts/library: introduce parseoptsDave Reisner2-0/+147
This will replace our current options parser used in pacman-key, makepkg, and ideally elsewhere. It follows heuristics closer to that of GNU getopt long (and thus pacman itself), with the exception that it does not allow for options with optional arguments. Due to the way this parser will be used, this sort of functionality will not be needed. Instead of relying on eval+set, options are normalized into an array, OPTRET, which callers should expect to be populated after returning from parseopts. This avoids problems with quotes and spaces in arguments, assuming that the user quotes properly when passing into the application. A new test harness for parseopts is added in test/scripts. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-12Remove SyncFirst optionDan McGee6-201/+0
This has outlived its usefulness and causes more problems than it solves. It has historically only ever been used to install pacman first. That should not be needed given we provide the vercmp utility (which has no library dependencies) and so calling pacman in install scripts is a sign of poor packaging. Work-duplicated-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16pactest: make OPTDEPEND rule look at non-description onlyDan McGee1-2/+5
Signed-off-by: Dan McGee <dan@archlinux.org>