| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The HoldPkg feature is even more important when the packages to be held are
pulled automatically by pacman, in a -Rc and -Rs operation. Before, it only
applied when the packages were explicitly requested by the user to be
removed. This patch extends holdpkg to -Rc and -Rs by doing the HoldPkg
check just before trans_commit.
Additionally, the whole HoldPkg stuff was moved to the front-end.
I changed the default behavior to "don't remove", so I modified remove030.py
pactest as well.
See also: FS#9173.
Original-work-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/dload.c
|
|
When the output is going to a file, glibc seems to buffer way too much
making it hard to monitor progress while tailing a file.
Signed-off-by: Simo Leone <simo@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch slightly modifies pacman.c/_parseconfig():
See FS#12148. Now pacman prints the following error message in that case:
"error: could not register 'unstable' database (could not open database)"
I also added an error message for alpm_db_setserver() error.
I changed the "return(1);" scheme to "ret = 1; goto cleanup;" to make
sure that we free allocated memory and close open files.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Mostly noticed when compiling libalpm/pacman with ICC.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
From now on -Qu is an "outdated package" filter on local database.
(This is a behaviour change.)
This patch fixes some memleaks and makes the code cleaner, for details see
my comment on FS#7884.
FS#11868 is implemented.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Example usage and output :
> src/util/testdb -h
usage:
testdb [-b <pacman db>] : check the local database
testdb [-b <pacman db>] core extra ... : check the listed sync databases
> src/util/testdb
Checking the integrity of the local database in /var/lib/pacman/
> src/util/testdb core extra testing community
Checking the integrity of the sync databases in /var/lib/pacman/
missing dependency for archboot : bcm43xx-fwcutter>=006-2
missing dependency for xvattr : xfree86
missing dependency for eclipse-ve : eclipse<3.3
missing dependency for flumotion : twisted-web
missing dependency for gg2 : arts
missing dependency for man-pages-cs : groff-utf8
missing dependency for qc-usb : kernel26<2.6.26
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Calling printf() in a signal handler can be dangerous, so avoid it by
writing directly which is guaranteed to be safe according to signal(7).
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Every call to getcols() results in two ioctl() calls, which we really didn't
need as changing the number of columns in mid-print would be pretty crazy.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Because libalpm always returns a root path with a trailing slash, when we
use it to create our unspecified paths we get double slashes in the result.
Use the fix suggested by Jürgen Hötzel to remedy this.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We don't need to zero things out, we are already using calloc for this
purpose.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#11339, which is a regression of commit 89c2c5196:
When totaldownload is enabled, the database downloading percent (-Sy) is
always at 0. That is because we have no guarantee that the totaldownload
callback was called by libalpm. In particular, it is not called (and it
would not make sense to) when a single file is downloaded, like it is the
case with databases.
So the correct way to detect if totaldownload should be used is checking
both config->totaldownload and list_total, like it was already done in
several places in the cb_dl_progress function.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#11331
The newline was lost with commit 9451b2e4f23a3c566fcfe3420c379b3cb3eb1f90.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
|
|
This is more consistent with the private functions :
_alpm_db_get_{pkg,grp}cache
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These two functions now take directly a package list rather than a database.
checkdbconflicts was renamed to checkconflicts.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
During an upgrade, only the new optdepends will be displayed, to only keep
the useful information and not clutter pacman output too much.
The whole optdepends list is always available with -Si / -Qi.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
We had one "None" and one "None\n" string; we can let the program do the
addition of the newline so we don't have to.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch kills one of our hackish pseudo transactions: PRINTURIS.
(The other one is -Sw)
From now on, front-end must not call trans_commit in case of -Sp,
it should print the uris of target packages "by hand" instead.
PRINTURIS flag was removed, NOCONFLICTS flag can be passed to skip
conflict checks.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The yesno function had a preset argument for specifying the default answer :
yes or no.
However, in all our calls to yesno, only one used the default "no" answer.
Having to specify preset==1 for all the other cases was rather cumbersome.
To make this easier, this commit adds a noyes function, with the following
behavior :
yesno() : default answer is yes
noyes() : default answer is no
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Change the return values to be more informative.
It was previously boolean, only indicating if a sync package was newer than
a local package.
Now it is a simple wrapper to vercmp, handling the force flag.
* Remove the verbose output from _alpm_pkg_compare_versions.
The "force" message is not so useful.
The "package : local (v1) is newer than repo (v2)" message can be moved to
-Su operation.
For the -S operation, it is better to have something like :
"downgrading package from v1 to v2"
* Don't display the "up to date -- skipping" and "up to date -- reinstalling"
messages, when the local version is newer than the sync one.
* Fix the behavior of --needed option to not skip a target when the local
version is newer, and clarify its description.
* Add a new alpm_pkg_has_force function
This allows us to access the pkg->force field like any other package fields.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is a work around for FS#8725.
There are some bad combination of proxies and mirrors where the Content
Length is not returned, and thus the progress bar can't be displayed
correctly.
Dan: Note that this patch also adds a "downloading" message when the
progress bar is disabled, which was formerly not indicated at all in the
output.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This implements FS#10630.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
list_display puts several members on the same line, which is not appropriate
for optdepends:
Optdepends: foo: feature1 bar: feature2 baz: feature3
The new list_display_linebreak function puts every member on its own line,
which is much better with optdepends:
Optdepends: foo: feature1
bar: feature2
baz: feature3
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: implement this new behavior as a new function rather than as a
parameter of list_display]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
So dump_pkg_full will indent all strings correctly.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: add string_length function]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#11203.
The doc has always mentioned NoPassiveFtp, but an inconsistency was
introduced with commit 76f816b9f764434d02e90207ee4656ebae2b6a8c when case
sensitive comparision was introduced, and was only found after commit
b3e6cf652c9e989badaf5499abb1d64c1a110927 which dropped the case insensitive
comparison.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#11180.
The usage of the total percent was detected like this :
/* use disp_percent if it is not 0, else show bar_percent */
However, it is very possible that the total percent is 0 at the beginning,
if the first packages downloaded are very small compared to the total
download.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This option wasn't used.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#7794.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had a lot of duplicated code here. The code handling the showsize option
needed to be there three times :
1) for install part of -S
2) for remove part of -S (conflict removal)
3) for -R
This patch introduce a new display_targets(pkglist, install) function which
can handle the 3 cases above. We pass install == 1 for case 1), and install
== 0 for case 2) and 3).
Now we can finally get the benefit of an old patch which handled the
ShowSize option consistently in the 3 cases above, without an awful lot of
duplicated code :
http://www.archlinux.org/pipermail/pacman-dev/2008-January/011029.html
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
With --quiet, "pacman -Sg grp" and "pacman -Qg grp" don't list group names.
Note that "pacman -Qgq" and "pacman -Sggq" (without targets) still list
group names becuase their output would not be very useful without them.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 874190827676e3a974e8c5fef6c51b9e9d6b60fa disabled --debug in these
cases. We just clear PM_LOG_WARNING flag now.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This presents plenty of problems on OSes besides Linux, and even on Linux
when the libtool file for libarchive isn't present. The static build isn't
all that useful anyway as missing something such as glibc will still leave
you unable to run the pacman.static binary. Remove it from the formal build
process.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In particular, this avoids warnings cluttering the output of these
operations.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now '-S provision' handling is done in the back-end.
In case of multiple providers, the first one is selected (behavior change:
deleted provision002.py). The old processing order was: literal, group,
provision; the new one: literal, provision, group. This is more rational,
but "pacman -S group" will be slower now. "pacman -S repo/provision" also
works. Provision was generalized to dependencies, so you can resolve deps by
hand: "pacman -S 'bash>2.0'" or "pacman -S 'core/bash>2.0'" etc. This can be
useful in makepkg dependency resolving. The changes were documented in
pacman manual.
alpm_find_pkg_satisfiers and _alpm_find_dep_satisfiers functions were
removed, since they are no longer needed.
I added some verbosity to "select provider instead of literal" and
"fallback to group".
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now "pacman -R foo" first searches for literal, and then for group.
This is faster in most cases, see:
http://www.archlinux.org/pipermail/pacman-dev/2008-July/012311.html
"-R group" implementation was broken, since alpm_grp_get_pkgs returns with
an pmpkg_t list, not a string list.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
PM_TRANS_CONV_INSTALL_IGNOREPKG callback function can get 2 params: foo, bar
in this order (packages), bar can be NULL.
Old API:
foo, NULL: Do you want to install foo from IgnorePkg?
foo, bar: foo requires bar from IgnorePkg. Do you want to install bar?
New API:
foo, bar: Do you want to install foo from IgnorePkg? (If bar!=NULL:) bar
requires it.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were using the stat() system call in quite a few places when we didn't
actually need anything the stat struct returned- we were simply checking for
file existence. access() will be more efficient in those cases.
Before (strace pacman -Ss pacman):
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
33.16 0.005987 0 19016 stat64
After:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
34.85 0.003863 0 12633 1 access
7.95 0.000881 0 6391 7 stat64
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We used list_display() on -Sg output, which might have been slightly nicer
looking but made it much harder to parse in something like a shell script.
Reformat it in the 'grpname pkgname' format that -Qg is already using.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Some previous commits apparently broke the get_filename function for package
loaded with pkg_load (on a -Qip operation) because this field was no longer
filled. Now pkg_load fills it.
But the -Qip operation needs to be run like this : -Qip <filename>, so the
filename is already known. There is no need to display it again.
Besides, on a normal -Qi operation, the filename is not displayed either
because this information is not stored in the local database.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
By putting the search / group / info / list operations just after the -Sy
op, we can simplify several checks :
1) the check for "missing targets". Since we took care of the above
operations, we now have less cases to consider :
* -Syu or -Su : we can proceed
* -Sy : we can end now (this is actually a bugfix)
* -S : this op requires targets, so exit with an error
2) the check to see if a transaction is needed. If we arrive at the end of
the function, it is either because we have -Su or -S <targets> so we already
know a transaction is needed there.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add a new totaldlcb callback function to libalpm and make pacman utilize it
when the TotalDownload option is enabled. This callback function is pretty
simple- it is meant to be called once at the beginning of a "list download"
action, and once at the end (with value 0 to indicate the list has been
finished). The frontend is responsible for keeping track of adding
individual file download amounts to the total xfered amount in order to
display some sort of overall progress.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We have been using unsigned long as a file size type for a while, which
works but isn't quite correct and could easily break. Worse was probably our
use of int in the download callback functions, which could be restrictive
for packages > 2GB in size.
Switch all file size variables to use off_t, which is the preferred type for
file sizes. Note that at least on Linux, all applications compiled against
libalpm must now be sure to use large file support, where _FILE_OFFSET_BITS
is defined to be 64 or there will be some weird issues that crop up.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add a new configure flag, --enable-git-version, that allows the output of
'git describe' to be used in the version string associated with this
package. This could aid in debugging for users that are using a development
version of pacman and we should be able to figure out which cut of code they
are using.
Sample output:
$ pacman --version
Pacman v3.1.4-190-g4cfa-dirty - libalpm v2.3.1
$ makepkg --version
makepkg (pacman) 3.1.4-190-g5861-dirty
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If we don't set the pkgname var to NULL, we run into all sorts of beautiful
segfault behavior when a group spans multiple repositories and we try to
print out the location of the former list. Easy fix.
This regression was introduced in bf8670036907b3ede18d37b7a3f0f7e14542a5ac.
Signed-off-by: Dan McGee <dan@archlinux.org>
|