summaryrefslogtreecommitdiffstats
path: root/src/util/pactree.c
AgeCommit message (Collapse)AuthorFilesLines
2011-08-25strtrim: don't move empty stringDan McGee1-1/+6
There were many cases where the string coming in was a blank line, e.g. "\n\0", length 1. The trim routine starts by trimming leading spaces, thus trimming everything. We would then proceed to do a memmove of the NULL byte, which is completely worthless as we can just assign it instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-08mark option structs as constDave Reisner1-1/+1
These are never modified and even getopt_long's prototype shows this modifier on the parameter. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-05signing: move to new signing verification and return schemeDan McGee1-1/+2
This gives us more granularity than the former Never/Optional/Always trifecta. The frontend still uses these values temporarily but that will be changed in a future patch. * Use 'siglevel' consistenly in method names, 'level' as variable name * The level becomes an enum bitmask value for flexibility * Signature check methods now return a array of status codes rather than a simple integer success/failure value. This allows callers to determine whether things such as an unknown signature are valid. * Specific signature error codes mostly disappear in favor of the above returned status code; pm_errno is now set only to PKG_INVALID_SIG or DB_INVALID_SIG as appropriate. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-28Rename pmerrno_t to alpm_errno_tAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmdepend_t to alpm_depend_tAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmpkg_t to alpm_pkg_tAllan McRae1-6/+6
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmhandle_t to alpm_handle_tAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-27Fix several -Wshadow warningsDan McGee1-2/+2
Only one of these looked like a real red flag, in find_requiredby(), but it doesn't hurt to fix several of them up anyway. Unfortunately, we can't turn this on universally due to things like the sync(), remove(), etc. builtins which we often use as variable names. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-24pactree: add -s option to walk sync DBsDave Reisner1-4/+92
Add a whole lot of bloat to parse pacman.conf and only a few lines to use the list of sync DBs instead of the local DB. Dan: I fully plan on this being temporary and us finding a better way in the future to parse pacman.conf from multiple binaries. Adding a standalone config parser is probably not the right way of going about things, but for now it is by far the easiest. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-24pactree: carry a list of databases for dep resolutionDave Reisner1-12/+25
Declare an alpm_list which, for now, only holds our local database. walk_deps and walk_reverse_deps are refactored to account for this, and a helper function is added to wrap alpm_db_get_pkg for traversing a list. This is groundwork for letting pactree walk the sync DBs. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-16Make pmdepend_t and pmdepmissing_t publicDan McGee1-4/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-13Move pm_errno onto the handleDan McGee1-19/+11
This involves some serious changes and a very messy diff, unfortunately. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09Require handle argument to all alpm_option_(get|set)_*() methodsDan McGee1-5/+1
This requires a lot of line changes, but not many functional changes as more often than not our handle variable is already available in some fashion. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-07Update utilities for new initialize/release methodsDan McGee1-15/+6
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-05-04pactree: make -Wwrite-strings friendlyDan McGee1-50/+62
Use a few structs to hold configuration values we change given certain options so we can be const-correct with string assignment across the board. Behavior should be completely unchanged. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20style cleanup: cast as (type *) not (type*)Dave Reisner1-2/+2
Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-20Style change: return(x) --> return xDan McGee1-9/+9
This was discussed and more or less agreed upon on the mailing list. A huge checkin, but if we just do it and let people adjust the pain will end soon enough. Rebasing should be relatively straighforward for anyone that sees conflicts; just be sure you use the new return style if possible. The following semantic patch was used to do the change, along with some hand-massaging in order to preserve parenthesis where appropriate: The semantic match that finds this problem is as follows, although some hand-massaging was done in order to keep parenthesis where appropriate: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a; @@ - return(a); + return a; // </smpl> A macros_file was also provided with the following content: Additional steps taken, mainly for ASSERT() macros: $ sed -i -e 's#return(NULL)#return NULL#' lib/libalpm/*.c $ sed -i -e 's#return(-1)#return -1#' lib/libalpm/*.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-25alpm: alpm_db_get_pkgcache_list => alpm_db_get_pkgcacheDave Reisner1-2/+2
This avoids needless breakage of the public API. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Read pkgcache into hashAllan McRae1-2/+2
Read the package information for sync/local databases into a pmpkghash_t structure. Provide a alpm_db_get_pkgcache_list() method that returns the list from the hash object. Most usages of alpm_db_get_pkgcache are converted to this at this stage for ease of implementation. Review whether these are better accessing the hash table directly at a later stage. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-01-29Remove need to explicitly register the local DBDan McGee1-1/+1
Perform the cheap struct and string setup of the local DB at handle initialization time to match the teardown we do when releasing the handle. If the local DB is not needed, all real initialization is done lazily after DB paths and other things have been configured anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07Fix some more simple conversion "errors"Dan McGee1-1/+1
None of these warn at the normal "-Wall -Werror" level, but casts do occur that we are fine with. Make them explicit to silence some warnings when using "-Wconversion". Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07Update copyright years for 2011Allan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-20Always specify arguement type in function delcarationsAllan McRae1-1/+1
Always declare a function with (void) rather than () when we expect no arguements. Fixes all warnings with -Wstrict-prototypes. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12pactree: use variables for color and tree outputXavier Chantry1-57/+39
This allows to very easily support non-color and linear mode, by just setting the variables to an empty string, very much like it was done in the bash script. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-12pactree: separate dependency and print logicXavier Chantry1-60/+92
The deps walking code simply calls print_start, print, print_end, and all the printing logic is handled there. The unresolvable printing is disabled for now because it does not handle linear mode, and the linear and color output will be re-written. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-12pactree: rewrite in CDave Reisner1-0/+358
Use the bash script in contrib as the basis for a C rewrite using libalpm. The speedup can go from dozens of seconds to less than one second. Colorized output is preserved. The --graph option generates output that graphviz's `dot' utility will understand to draw us a graph. Output is written to stdout and it is left up to the user to pipe the data and determine the output characteristics. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>