Age | Commit message (Collapse) | Author | Files | Lines |
|
alpm_dep_compute_string
This patch introduces the following function name convention:
_compute_ in function name: the return value must be freed.
_get_ in function name: the return value must not be freed.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The HoldPkg feature is even more important when the packages to be held are
pulled automatically by pacman, in a -Rc and -Rs operation. Before, it only
applied when the packages were explicitly requested by the user to be
removed. This patch extends holdpkg to -Rc and -Rs by doing the HoldPkg
check just before trans_commit.
Additionally, the whole HoldPkg stuff was moved to the front-end.
I changed the default behavior to "don't remove", so I modified remove030.py
pactest as well.
See also: FS#9173.
Original-work-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The yesno function had a preset argument for specifying the default answer :
yes or no.
However, in all our calls to yesno, only one used the default "no" answer.
Having to specify preset==1 for all the other cases was rather cumbersome.
To make this easier, this commit adds a noyes function, with the following
behavior :
yesno() : default answer is yes
noyes() : default answer is no
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had a lot of duplicated code here. The code handling the showsize option
needed to be there three times :
1) for install part of -S
2) for remove part of -S (conflict removal)
3) for -R
This patch introduce a new display_targets(pkglist, install) function which
can handle the 3 cases above. We pass install == 1 for case 1), and install
== 0 for case 2) and 3).
Now we can finally get the benefit of an old patch which handled the
ShowSize option consistently in the 3 cases above, without an awful lot of
duplicated code :
http://www.archlinux.org/pipermail/pacman-dev/2008-January/011029.html
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now "pacman -R foo" first searches for literal, and then for group.
This is faster in most cases, see:
http://www.archlinux.org/pipermail/pacman-dev/2008-July/012311.html
"-R group" implementation was broken, since alpm_grp_get_pkgs returns with
an pmpkg_t list, not a string list.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Tested using many easily generated error conditions. Also added "malloc
failure" (conf.c) and "segmentation fault" (pacman.c) error messages for
translation.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
[Dan: fix trailing whitespace errors, other compilation issues]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The calls to alpm_trans_init and alpm_trans_release (+ error checking) were
duplicated between remove.c, sync.c and upgrade.c
This patch introduces trans_init and trans_release functions in util.c to
have this code just once.
So instead of having to do the same change 3 times for fixing FS#10273, I
just had to do it once (so I did it too :))
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Also bump the devel version on the master branch to 3.2.0devel.
|
|
This change is similar to the one made in
3017b71cb5cde3aef7e0efb5f49843cccf759956.
We had a "loading package data..." message, followed by either "failed" or
"done", but it didn't take into account that other warnings / questions
could be displayed between.
Ref: http://archlinux.org/pipermail/pacman-dev/2008-January/010971.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Add a preset paramater to yesno function saying which answer should be the
default. Ref:
http://www.archlinux.org/pipermail/pacman-dev/2007-June/008470.html
This allows us to answer no by default to some questions, like the -Scc one
mentioned in the above thread, and implemented by this patch.
Another advantage is that we don't have to repeat the [Y/n] in every
questions. It's only put once in yesno function. This highly reduces the
chances that YES and NO strings are translated, but not some questions,
which lead to obvious confusions.
Finally, the noconfirm variable only needs to be used in that yesno
function. So all other usages of it were removed.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Noticed-by: Vojtěch Gondžala <vogo@seznam.cz>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Make the error message printed when addtarget fails consistent between
add.c, remove.c and sync.c.
The main problem was that the "failed to add target" in case of a removal
operation could sound confusing. There was also a little output problem
with -U ("failed" was missing).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
yesno function already handles noconfirm. No need to do it twice.
This reverts commit dffa0654f2eae1c427a74c647d22f0bbd201ccf7.
|
|
There is another case where pacman-git asks for confirmation, when it should
not. It is when removing packages. If running with makeworld --noconfirm
--rmdeps the question will come to the log file, and never appear on the
console, so you can wait forever wondering what is happening.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Update the GPL boilerplate to direct people to the GNU website for a copy of
the license, as well as bump all of Judd's copyrights to 2007.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* The frontend calls alpm_trans_prepare(&data), and in case of errors,
receive the missing dependencies / conflicts / etc in the data pointer.
It apparently needs to free this structure totally with :
alpm_list_free_inner(data, free)
alpm_list_free(data)
So I added alpm_list_free_inner(data, free) in
pacman/{sync.c,remove.c,add,c}
* in _alpm_sync_prepare, the deps and asked lists were not freed in case
of errors (unresolvable conflicts).
Besides the code for handling this case was duplicated.
* in _alpm_remove_commit, free was used instead of alpm_list_free for
newfiles.
* newline fix in pacman/sync.c
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Run the kernel's cleanfile script on all of our source files.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Instead of declaring the extern variable in every *.c file, include it in
the header file that makes sense. This means handle.h for the handle, and
conf.h for the pacman side config object.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Public alpm_dep_get_string function is introduced, which converts a
pmdepend_t structure to printable string in %DEPENDS% format. This
function is now used in pacman to print dependency error messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I'm currently working on python bindings for alpm written in pyrex. While
working i found that declaring alpm_strerror as
char * alpm_strerror (void)
instead of
char * alpm_strerror (int err)
and then using pm_errno in the implementation instead of err, could make it
more bindings-friendly.
Dan: cleaned up and added void to declaration. Instead of replacing existing
function, add a new function called 'alpm_strerrorlast(void)'.
Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Refactor the goto cleanup; statements out of add.c and remove.c, and move
what the cleanup: label did into a function.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
See comment from Nagy here :
http://www.archlinux.org/pipermail/pacman-dev/2007-April/008134.html
This also makes easier correct usage of checkdeps in sync.c,
which fixes sync901 pactest (and so bug 6057).
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Readd default logmask of ERROR and WARNING
* Remove DOWNLOAD log level as it no longer applies
* Add 'no targets' logic back in where it applies
* Switch some prints in parseconfig to ERROR
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add some 'const' keywords all over the code to make it a bit more strict on
what you can and can't do with data. This is especially important when we
return pointers to the pacman frontend- ideally this would always be
untouchable data.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove any use of the former path variables defined by the Makefiles or
config.h. These are now runtime configurable only with pacman.conf (or by
using flags on the command line).
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This change allows us to use all autoconf specified paths, most notably
$(localstatedir). It is quite a change and touches a lot of files, as
all references to the DB and cache were done with the ROOTDIR as a prefix.
* add --lock command-line option to pacman to specify the location of the
lockfile (this can now be specified at configure time by setting the
$localstatedir path).
* Rip quite a few settings out of configure.ac as they are now picked by
setting the paths during configure or make.
* Fix bug with /tmp fallback for sync downloads not working correctly
(related to root location, now the system tmp dir is used).
* Simplified the parameters to some libalpm functions, and added get/set
for the new lockfile option.
* Renamed several of the DEFS to names without the PM_ prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
One function was left in this set of files after the earlier cleansing, so
I moved yesno to util.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
All ERR() calls have been replaced with fprintf(stderr, ...).
Still to be done- fix all the newline issues that are sure to pop up. What fun!
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is the first step of converting output to standard functions such as printf, and
eventually allowing compiliation with the -pedantic flag as is done on the libalpm
side.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Some more major code reorginization here. The download progress callback
function has been renamed and moved to callback.c, which is the former
trans.c with the download and log callbacks added. In addition, this allows
util.c to be cleaned up as fill_progress can now be static in callback.c.
We've also cut two more source files out.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Unification and cleanup of the add.c and remove.c code. It looks remarkably
similar, so this may be a candidate for functionalization at a later time.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Remove libintl.h from most files, as we only need to include it once in
util.h where _() is defined.
* Remove other unnecessary header inclusions.
* Remove a macro that was only used once and replaced it with actual code.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Having a seperate header file for add, remove, query, etc. seemed overkill.
Merge them all into a common pacman.h and fix the necessary #includes.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
reordering and adding ones that were forgotten (noticed when trying to
compile after reordering).
* Updated the HACKING file to include information on #include usage.
* print -> vprint in "making dir" function in pactest.
|
|
be used in place of -Y. Also, -D was rather silly, as it does mostly what -S
does.
* Cleaned up pacman_deptest - removed the goofy faketarget stuff (NEEDS testing
still)
* libalpm function renames
|
|
* Removed useless buildstring function from util.h; replaced all calls of it
with list_display.
* Made list_display output 2 spaces instead of 1 between each item.
|
|
* The --debug params were goofy. New setup allows --debug without params,
--debug=<level> where level 1=debug output, 2=debug and download output,
3=debug, download, and function tracing output. This seems more sane to me.
* Removed PM_LOG_FLOW1 and PM_LOG_FLOW2. They were just confusing. When adding
new functions, it is near impossible to determin if your output should be
"flow1" or "flow2" without tracking all the way up the call chain. Rarely
would one ever say "ok, lets just show "flow2" output. These have both been
replaced with PM_LOG_DEBUG
* Removed the need for the root parameter on alpm_initialize. it is now
defaulted to PM_ROOT just like dbpath and cachedir. This allows alpm to be
initialized BEFORE option parsing in the front end, saving us some duplicate
variables in the frontend.
* Cleaned up front end variables due to early alpm_initialize call.
|
|
be fixed.
|
|
* Added alpm_list_remove_node for single list node removal
* Proper error checking/output for failed db_read/db_write (missing files)
* Invalid packages (missing files) are now removed from the package cache
* -Qs and -Ss output now look the same
* config.rpath causes errors on one machine I had, so I added it to CVS
* Fixed a "clobbered memory" issue when installing groups - only the outer list
should be free'd, not the contained data
|
|
* renamed pmlist_t -> alpm_list_t
* made alpm_list_t a public type (alpm_list.h header)
* removed additional storage for registered DBs in pacman source
* some code cleanup
* removed duplicate (pm)list_display functions from pacman source
* misc code cleanup
|
|
|
|
* Modified some dependancy checking
* Changed "performing local database upgrade" message to be more clear
* Change 'usize' to 'isize' in database files
* Scriptlet output is now sent to pacman's log file
* Limited some debugging output to be more clear
|
|
(no PKGBUILD)
* libalpm api changes - move from a _getinfo(p, WHAT_WE_WANT) scheme to a
typesafe _get_what_we_want(p) scheme [not 100% complete yet]
* some const correctness changes
* removal of PM_* types in alpm.h in favor of the pm*_t types used throughout
libalpm
|
|
to list. The diff should show you 8)
|
|
|
|
|