summaryrefslogtreecommitdiffstats
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2009-01-02Small makefile updateDan McGee1-1/+2
Use the proper call for symlink creation Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-02makepkg: detect incorrect usage of provides arrayAllan McRae1-2/+10
Using > or < in the provides array is wrong so make it cause an error. Fixes FS#12540. Also, use bash substitution rather than spawning new processes where possible in the error checking. Move split package detection to a better position. Signed-off-by: Allan McRae <allan@archlinux.org> [Dan: backport to maint] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-02makepkg: tidy version package testsAllan McRae1-6/+6
The use if "! -z" to check if a string is not null is not good practice so replace with the "-n" option. Also use the AND comparison within one test rather than on two separate tests. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-02makepkg: quote all uses of BUILDSCRIPTAllan McRae1-4/+4
Allows specifying alternative build script with spaces in name Signed-off-by: Allan McRae <allan@archlinux.org> [Dan: backport some of the fixes to maint] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-02makepkg: Replace getopt with internal functionAllan McRae1-2/+89
This will allow makepkg to work on systems like Mac OS X where the default getopt is too old to properly handle long options. The new parse_options function should replicate getopt's behaviour completely. Original work: Yun Zheng Hu <yunzheng.hu@gmail.com> [Allan: Rewrite and bug fixes] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-12-07makepkg: save and restore shell options before and after build()Dan McGee1-0/+4
Fix the issue uncovered by FS#12344. In this instance, the dotglob shopt was being set in the build() function but never cleared, causing issues in the remaining parts of the makepkg script. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-11-30Simplify mercurial revision commandDan McGee1-1/+1
Not only does this require less sed-magic, it also fixes FS#12286 where fetching the revision number fails if mercurial is in compact mode. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-31makepkg: fix bash substitution to work under older versionsDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-28Give pacman-optimize a refresherDan McGee1-21/+34
This patch addresses quite a few lingering issues in the pacman-optimize script. FS#11767 provoked this look-over and the following issues were noticed and fixed: * If an alternate dbroot was specified, then the lockfile location was never updated to reflect it. The lockfile location is now set after all dbpath initialization. * The inclusion of a trailing slash on dbroot was problematic and led to the following command being executed: bsdtar -xpf /tmp/pacman-optimize.p12Q4vAUWY/pacman-db.tar.gz \ -C /var/lib/pacman/.new/ It is doubtful we meant to create a hidden directory like this below our database root, only to go and delete it a second later and then re-extract. Fix the whole thing by ensuring our dbpath has its trailing slash stripped and then appending it when necessary. * The DB extraction was performed twice for no real apparent reason. This opens the door for extraction problems the second time around, leaving you with no original database to fall back to. Change the behavior so we only extract once, and then perform a directory shuffle once we verify the checksums are correct. * Perform an explicit sync after we drop the new database on the disk. It should work better this way. * Tighten up our check for a pacman lockfile and the time we create one. There is still a possible race condition but the window is shorter. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-28makepkg: fix updating PKGBUILD when building SCM packagesAllan McRae1-1/+3
Fixes a bug and resets pkgrel to 1 when bumping pkgver Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-18repo-add: Use openssl instead of md5sumDan McGee1-2/+2
This is similar to the change we made in makepkg so it is cross-platform compatible and doesn't require coreutils. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25makepkg : allow to specify a download filenameXavier Chantry1-20/+45
A source entry can now have the following form, to specify a different filename : "filename::http://path/to/file" Of course, the old syntax is still supported : "http://path/to/file" And as before, in the second case, the filename used is simply "file". This fixes FS#11292, because handling multiple source files with the same name is now possible (just choose a different filename). But it will also allow to deal much more nicely with funny url like this by using a sane filename (and unfortunately, there are quite a few) : http://www.vim.org/scripts/download_script.php?src_id=6992 Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23makepkg : localize the Y/n part of the question.Xavier Chantry1-3/+4
pacman already localizes the yesno stuff, so doing the same in makepkg is more consistent. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23makepkg: do insensitive comparisons of checksums.Xavier Chantry1-1/+3
This fixes FS#11283 , which was originally reported on the forums : http://bbs.archlinux.org/viewtopic.php?id=53794 Insensitive comparisons were implicitly made before since md5sum --status was used for checking. Now that we use openssl and compare checksums manually in bash, we lost that feature. This can be easily reintroduced using tr '[A-F]' '[a-f]' What convinced me to fix it is that the md5 command line tool generates md5sums in upper case by default : http://www.fourmilab.ch/md5/ And finally, A-F and a-f are the same in hex and both are used. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-19Factor shell script size command into configure scriptDan McGee2-2/+3
Commit 149839c5391e9a93 introduced a small behavior regression as a drawback for a better portability. repo-add now includes the approximate size (to the nearest KB) rather than an exact size due to the switching of the du command to a more portable form. Instead of sacrificing the exact size, use configure to help us determine a valid command to acquire our filesize and place it in the sync database. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-19repo-add: add optdepends to the sync database.Xavier Chantry1-1/+3
See FS#10630. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-19repo-add: Fix whitespaces handling in variables.Nagy Gabor1-9/+8
repo-add didn't handle whitespaces nicely in fields value, and this has hurt us several times, first with provision version (FS#9171) and then with optdepends (FS#10630), so it is time to fix it. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-13Fix error when sourcing profile scriptAllan McRae1-0/+3
With the "set -e" property set, a failure when sourcing /etc/profile can cause makepkg to exit without error message. The bash-completion package activates this bug. Fixes FS#11179. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-09Fix creation of source package with local source filesAllan McRae1-1/+1
Fixes FS#11149. Signed-off-by: Allan McRae <allan@archlinux.org>
2008-08-04makepkg: fix download functions with weird urls.Xavier Chantry1-12/+14
This fixes FS#11076. 1) quote the url in get_downloadclient 2) only enable nullglob where it is needed You can see in 7fc306cd41 that nullglob was only enabled for one part, and that it already caused other problems, which were fixed in 7ff5a917fd0. Thanks to Henning Garus for pointing out that nullglob was problematic with urls containing expansion char like '?'. 3) change get_downloadcmd which displayed the download command line to download_file which actually executes the download. It seems nicer that way. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-04makepkg: Clarify usage instructions for --allsource/--sourceDan McGee1-1/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29makepkg: Fix STRIP_DIRS test.Xavier Chantry1-2/+3
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29makepkg : use /etc/profileXavier Chantry1-7/+2
This fixes FS#9486. source /etc/profile instead of all individual files in /etc/profile.d/* (which is done by /etc/profile anyway). Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-24makepkg: add packages to pkgdeps list only after successful installAllan McRae1-2/+2
This fixed FS#9403. With this you can use "makepkg -sr", install the dependencies, Ctrl+c during the makedepends installation and have makepkg remove the installed packages on the exit. Previously makepkg tried to also remove the makedepends which were not installed. The deplist="" line in remove_deps is due to an obscure bug where local varaibles from the handle_deps function seem stay in scope because we never formally exited it. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-20Make strip paths configurableAllan McRae1-3/+6
This patch introduces a new STRIP_DIRS makepkg.conf option to change makepkg's search path when stripping binaries. Original work by: Thomas Bächler <thomas@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-19Strip *.a libraries in makepkgAllan McRae1-1/+3
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-19Use LC_ALL=C everywhereAllan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-15Use "pacman -S $dep" in makepkg's dependency resolvingNagy Gabor1-7/+2
This method is equivalent with pacman's resolvedeps. $dep can be any (versioned) dependency. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-15makepkg: speed up svn revision check for large repositoriesDan McGee1-1/+1
Using the suggestion from FS#10905, use 'svn info' rather than 'svn log' to get the current revision number, which is much quicker for large Subversion repositories. Eventually git will rule the world. :) Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-07Merge branch 'maint'Dan McGee1-1/+1
2008-06-29repo-add cleanup.Xavier Chantry2-15/+15
* change ln -s to ln -sf in the Makefile to prevent a failure when the link already exists. * make test_repo_db_file simpler and more natural, move the complexity out of it. * remove one $cmd = repo-remove check that wasn't needed Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-27Remove symlinks to libtool filesAllan McRae1-1/+1
This prevents dangling symlinks to removed libtool files when the !libtool option is used. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-22Additional path quoting and srcdir/pkgdir usageAllan McRae1-9/+8
Removes the remaining $startdir/{src,pkg} usage and adds quoting around (hopefully) all remaining path variables Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-15makepkg: add several quotes needed after nullglob.Xavier Chantry1-6/+6
After the "shopt -s nullglob" change, all regular expressions should be properly quoted. This commit only fixes the ones I found, there are probably others left, so this should be kept in mind for easier future fixing. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-15makepkg: Add missing quotes for the source array.Xavier Chantry1-4/+4
Now makepkg can handle filenames with whitespaces in the source array. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-15Use openssl for checksum verification instead of *sum utilitiesSebastian Nowicki1-7/+7
md5sum, sha1sum, etc, do not exist on BSD systems by default. Openssl is a good portable alternative. This also brings in a dependency for openssl. Closes FS#10530. Signed-off-by: Sebastian Nowicki <sebnow@gmail.com> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-14Combine repo-add and repo-remove into one scriptDan McGee3-244/+76
They shared about 75% of their code, so there is no real reason we should maintain them separately. Merge the differences accordingly and add a check based on the basename of the command used to decide what behavior to follow. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-14repo-*: allow use of readlink or realpathDan McGee2-10/+33
Linux coreutils provides readlink, and BSD systems tend to have realpath available. Both commands provide similar functionality but of course have different names. Add a check for either and use what is available. While doing this, also unify some of the differences that have cropped up between repo-add and repo-remove. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-14Move geninteg block in makepkg before error checkingAllan McRae1-11/+12
This patch moves the generating of integrity checks to before any error checking takes place in the PKGBUILD file. This allows integrity generation to complete when unrelated errors exist in a PKGBUILD file and allows the removal of multiple checks of the GENINTEG variable that would otherwise be needed. In addition a minor fix is made to a comment. Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-12Merge branch 'maint'Dan McGee1-1/+1
2008-06-12Use shell builtin to list files for package inclusionDan McGee1-1/+5
On BSD systems, as super user, the 'ls' command displays all dot files by default, causing these to get included when not intended. If we use the bash glob operator, we can avoid issues with ls on different platforms; however, we need to turn the nullglob shell option on first to ensure we don't have problems in empty directories. Originally-noticed-by: Sebastian Nowicki <sebnow@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-08makepkg: remove deprecated --usesudo codeDan McGee1-7/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-08makepkg: add --allsource optionAllan McRae1-12/+34
This supplements the --source option and does nearly the same thing, except downloaded source files are included in the archive as well. The sources are now packages with a pkgname/ prefix. Original-work-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-01Don't require --force when using the --nobuild optionAnton Fiuman1-1/+1
makepkg should not abort with error when a user uses the --nobuild option to extract sources if a package has already been built. Signed-off-by: Anton Fiuman <llexiw@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-31makepkg: remove some dead TODO codeDan McGee1-7/+0
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-31Allow GIT version to be used in pacman buildsDan McGee1-1/+8
Add a new configure flag, --enable-git-version, that allows the output of 'git describe' to be used in the version string associated with this package. This could aid in debugging for users that are using a development version of pacman and we should be able to figure out which cut of code they are using. Sample output: $ pacman --version Pacman v3.1.4-190-g4cfa-dirty - libalpm v2.3.1 $ makepkg --version makepkg (pacman) 3.1.4-190-g5861-dirty Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29makepkg - add check for valid options in PKGBUILDAllan McRae1-20/+21
This patch removes the code block in makepkg that checked for depreciated options in a PKGBUILD and provided a workaround. Unknown and depreciated options are upgraded to error conditions. Also, removed TODO regarding including install script if exists and $install is unset. That should never happen. Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29No error in makepkg when removing deps failsAllan McRae1-2/+9
Catches error from when pacman is unable to remove dependencies after successfully building package and prints warning. Fixes FS#10039. Signed-off-by: Allan McRae <mcrae_allan at hotmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Use chown 0:0 instead of root.rootSebastian Nowicki1-2/+2
On BSD systems using a dot as a separator is not allowed. On Mac OSX it is deprecated. A colon should be used instead. BSD systems also use the "wheel" group instead of "root" to indicate the "super user" group. Both groups use the id of 0. Signed-off-by: Sebastian Nowicki <sebnow@gmail.com> Acked-by: Aaron Griffin <aaronmgriffin@gmail.com> Acked-by: Dan McGee <dan@archlinux.org> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Use "legacy mode" on Mac OSX (for file command)Sebastian Nowicki1-0/+3
For some reason `file` on Mac OSX has different arguments than BSD and Linux; -i no longer prints out the mime strings. With the environment variable COMMAND_MODE set to "legacy", `file` behaves more like it does on Linux and BSD, i.e., `file -i` prints the mime type. Signed-off-by: Sebastian Nowicki <sebnow@gmail.com> Acked-by: Dan McGee <dan@archlinux.org> Acked-by: Aaron Griffin <aaronmgriffin@gmail.com> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-18 04:17:44 +0000