summaryrefslogtreecommitdiffstats
path: root/lib/libalpm
AgeCommit message (Collapse)AuthorFilesLines
2011-11-11invert iteration order for ignoregroupDave Reisner1-2/+2
This is a simple change that allows comparions to be more in line with how other checks are done. It will be necessary for ensuing patchwork that implements fnmatch for comparing and assumes a specific argument ordering. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-07Merge branch 'maint'Dan McGee1-1/+1
2011-11-01Fix thinko in _alpm_strip_newlineDan McGee1-1/+1
The point of this early compare to NULL byte check was so we could bail early and skip the strcmp() call. Given we weren't doing the check right, this never exited early. Fix it to work as intended. Noticed-by: Pepe Juárez <trulustapa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01libalpm/util: don't use sprintf to convert from bin to hexDan McGee1-10/+14
This is a trivial operation that doesn't require calling a function over and over- just do some math and indexing into a character array. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Fix size reported in CALLOC allocation failure messageDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Convert package and database archive reads to use file descriptorsDan McGee2-39/+65
This gives us a bit more control and over the archive reading process, and a bit less is done behind the scenes. It also allows us to use fstat() in preference to stat(), which should avoid some potential race conditions. Some reorganization is necessary to move the stat calls after the open() calls. Error handling and cleanup in general is also improved, as we had several potential memory and file handle leaks before in some error paths. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01libalpm/util: use low-level I/O for copyfile and checksum routinesDan McGee1-55/+61
This removes an unnecessary level of buffering. We are not doing line-based I/O here, so we can read in blocks of 8K at a time directly from the file. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Add OPEN() and CLOSE() util macrosDan McGee4-28/+24
These wrap the normal open() and close() low-level I/O calls and ensure EINTR is handled correctly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Merge branch 'maint'Dan McGee7-44/+69
2011-10-27dload: remove redundant conditionalDave Reisner1-2/+3
Replacing the strdup when after the first NULL check assures that we get continue with payload->remote_name defined. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-27dload: chmod tempfiles to respect umaskDave Reisner1-1/+12
Dan: fix mask calculation, add it to the success/fail block instead. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27Introduce ALPM_BUFFER_SIZE constantDan McGee5-19/+25
This takes the place of three previously used constants: ARCHIVE_DEFAULT_BYTES_PER_BLOCK, BUFFER_SIZE, and CPBUFSIZE. In libarchive 3.0, the first constant will be no more, so we can ensure we are forward-compatible by removing our usage of it now. The rest are unified for consistency. By default, we will use the value of BUFSIZ provided by <stdio.h>, which is 8192 on Linux. If that is undefined, a default value is provided. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Fix issues with replacing unowned symlinksDan McGee1-14/+19
There aretwo seperate issues in the same block of file conflict checking code here: 1) If realpath errored, such as when a symlink was broken, we would call 'continue' rather than simply exit this particular method of resolution. This was likely just a copy-paste mistake as the previous resolving steps all use loops where continue makes sense. Refactor the check so we only proceed if realpath is successful, and continue with the rest of the checks either way. 2) The real problem this code was trying to solve was canonicalizing path component (e.g., directory) symlinks. The final component, if not a directory, should not be handled at all in this loop. Add a !S_ISLNK() condition to the loop so we only call this for real files. There are few other small cleanups to the debug messages that I made while debugging this problem- we don't need to keep printing the file name, and ensure every block that sets resolved_conflict to true prints a debug message so we know how it was resolved. This fixes the expected failures from symlink010.py and symlink011.py, while still ensuring the fix for fileconflict007.py works. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Don't realloc a 0-length files array when loading packagesDan McGee1-8/+10
There is some pecular behavior going on here when a package is loaded that has no files, as is very common in our test suite. When we enter the realloc/sort code, a package without files will call the following: files = realloc(NULL, 0); One would assume this is a no-op, returning a NULL pointer, but that is not the case and valgrind later reports we are leaking memory. Fix the whole thing by skipping the reallocation and sort steps if the pointer is NULL, as we have nothing to do. Note that the package still gets marked as 'files loaded', becuase although there were none, we tried and were successful. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26libalpm/util: two stat() related cleanupsDan McGee1-14/+13
First, use fstat() in preference to stat() since we already have an open file handle. This also removes the need to check for a symlink as that is not possible when a file is opened. Next, use archive_entry_mode() rather than archive_entry_stat() as we only use the mode portion of the stat struct and the call is much cheaper. Also delay it until it is necessary. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Merge branch 'maint'Dan McGee2-5/+17
2011-10-25lib/sync: inform callers of compute_download_size of a partialDave Reisner1-2/+6
Extend the return values of compute_download_size to allow callers to know that a .part file exists for the package. This extra value isn't currently used, but it'll be needed later on. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-24Add more logging to download codeDan McGee1-3/+11
This adds a logger to the CURLE_OK case so we can always know the return code if it was >= 400, and debug log it regardless. Also adjust another logger to use the cURL error message directly, as well as use fstat() when we have an open file handle rather than stat(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Merge branch 'maint'Dan McGee1-2/+2
Conflicts: src/pacman/package.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21sync: move file download loop out of download_filesDave Reisner1-21/+25
Create a new static function called 'download_single_file' which iterates over the servers for each payload. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21sync: check for necessary disk space for downloadDave Reisner1-0/+28
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-21sync: extract build_payload() method from find_dl_candidatesDan McGee2-15/+19
This is done by both the delta and regular file code, so we can extract a little helper method. Done mostly to satisfy my "why are we repeating code here" itch. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21sync: dont group sync records by repositoryDave Reisner1-80/+85
Break out the logic of finding payloads into a separate static function to avoid nesting mayhem. After gathering all the records, download them all at once. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17base64: don't compile base64_encode() functionDan McGee2-0/+4
We don't use this anywhere; "comment" it out so we still remain relatively close to the upstream sources. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17Show an error message on failed remote key lookupDan McGee1-2/+2
The absolutely terrible part about this is the failure on GPGME's part to distinguish between "key not found" and "keyserver timeout". Instead, it returns the same silly GPG_ERR_EOF in both cases (why isn't GPG_ERR_TIMEOUT being used?), leaving us helpless to tell them apart. Spit out a generic enough error message that covers both cases; unfortunately we can't provide much guidance to the user because we aren't sure what actually happened. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17dload: add pointer to server list for each payloadDave Reisner2-0/+3
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17diskspace: create static function mount_point_list_freeDave Reisner1-11/+14
This logic is reused in both diskspace and downloadspace check functions, so pull it out into its own static method. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17diskspace: add _alpm_check_downloadspace()Dave Reisner2-0/+51
This function determines if the given cachedir has at least the given amount of free space on it. This will be later used in the sync code to preemptively halt downloads. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Large performance improvement for check for owned directoriesDan McGee1-5/+11
We can take a large shortcut here that saves us a lot of time, especially when upgrading packages with lots of directories. Obviously iterating the full file list of every single package to determine if this directory was present in any other package can take quite some time on a system with many packages installed. We don't need to remove a directory at all if we are upgrading a package and the version we are moving to still had the directory. Also make a small optimization on the package comparsion- we really only care about equality here, not the result of the compare, so we can shortcut using our name_hash. What kind of benefit does this give us? Oh, only a reduction from 295.7 million to 1.4 million strcmp() calls (99.5% fewer) during a `pacman -S linux libreoffice-common` operation. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Make _alpm_filelist_contains() NULL-safeDan McGee1-3/+7
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Merge branch 'maint'Dan McGee2-10/+16
2011-10-14Add missing #ifdef around cURL error code in download structDan McGee1-0/+2
Thanks to Eduardo Tongson on the mailing list. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Fix some strict 32-bit gcc warningsDan McGee1-1/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13curl_gethost() potential bug fixupsDan McGee1-10/+14
This is in the realm of "probably not going to happen", but if someone were to translate "disk" to a string longer than 256 characters, we would have a smashed/corrupted stack due to our unchecked strcpy() call. Rework the function to always length-check the value we copy into the hostname buffer, and do it with memcpy rather than the more cumbersome and unnecessary snprintf. Finally, move the magic 256 value into a constant and pass it into the function which is going to get inlined anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Merge branch 'maint'Dan McGee1-19/+30
Conflicts: src/pacman/util.c
2011-10-12Add user-visible warning message if public keyring not foundDan McGee1-0/+3
This should help point users in the right direction if they have not initialized via pacman-key just yet. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Remove alpm_list_getdata wrapper functionDan McGee2-14/+0
This one is pretty darn useless. Just derefence the ->data attribute since the type is public anyway and save yourself the function call. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12diskspace: extract check_mountpoint() functionDan McGee1-17/+23
This will be useful when extending disk space checks to free space checking before we download package files. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12_alpm_archive_fgets: optimize EOL searchDan McGee1-17/+17
Instead of iterating character by character, use memchr() calls to hopefully speed up the search. A newline is the most likely culprit, so search for that first followed by a NULL byte if there was no newline in the buffer. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12signing: delay gpgme_init() until latest possible momentDan McGee1-19/+27
In the default configuration, we can enter the signing code but still have nothing to do with GPGME- for example, if database signatures are optional but none are present. Delay initialization of GPGME until we know there is a signature file present or we were passed base64-encoded data. This also makes debugging with valgrind a lot easier as you don't have to deal with all the GPGME error noise because their code leaks like a sieve. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Convert MALLOC to actually call malloc()Dan McGee2-3/+3
If you need zero-filled allocations, call CALLOC() instead. This was from the original definition of these macros in commit cc754bc6e3be0f3; hopefully our code is in the shape it needs to be to switch this behavior. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Move infrequently used path variables off the stackDan McGee1-23/+30
These backup-related paths in package extraction are used on relatively few files during the install process, so bump them off the stack and into the heap. This removes the artificial PATH_MAX limitation on their length as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Extract a try_rename helper from extract_single_file()Dan McGee1-20/+18
This moves the repetitive (and highly unlikely) logging work to a single location. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Introduce alpm_time_t typeDan McGee9-35/+29
This will always be a 64-bit signed integer rather than the variable length time_t type. Dates beyond 2038 should be fully supported in the library; the frontend still lags behind because 32-bit platforms provide no localtime64() or equivalent function to convert from an epoch value to a broken down time structure. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12_alpm_parsedate: use strtoll() to parse numeric valueDan McGee1-1/+20
This prepares the function to handle values past year 2038. The return type is still limited to 32-bits on 32-bit systems; this will be adjusted in a future patch. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Final Transifex update before 4.0Dan McGee3-55/+59
We have a few incomplete translations, but these should be addressable before the 4.0.1 maint release that is surely not that far in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Update translations from TransifexDan McGee27-188/+331
In prep for the 4.0.0 release. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-10dload: unhook error buffer after transfer finishesDave Reisner1-1/+4
Similar to what we did in edd9ed6a, disconnect the relationship with our stack allocated error buffer from the curl handle. Just as an FTP connection might have some network chatter on teardown causing the progress callback to be triggered, we might also hit an error condition that causes curl to write to our (now out of scope) error buffer. I'm unable to reproduce FS#26327, but I have a suspicion that this should fix it. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05Update translation message catalogs in prep for 4.0 releaseDan McGee1-2/+6
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05Update translations from TransifexDan McGee27-280/+267
Signed-off-by: Dan McGee <dan@archlinux.org>