summaryrefslogtreecommitdiffstats
path: root/lib/libalpm/sync.c
AgeCommit message (Collapse)AuthorFilesLines
2010-10-13Allow local and sync db to be treated separatelyDan McGee1-1/+1
Implement this seemingly simple change in package.h: typedef enum _pmpkgfrom_t { - PKG_FROM_CACHE = 1, - PKG_FROM_FILE + PKG_FROM_FILE = 1, + PKG_FROM_LOCALDB, + PKG_FROM_SYNCDB } pmpkgfrom_t; which requires flushing out several assumptions from around the codebase with regards to usage of the PKG_FROM_CACHE value. Make some changes where required to allow the switch, and now the correct value should be set (via a crude hack) depending on whether a package was loaded as an entry in a local db or a sync db. This patch underwent some big rebasing from Allan and Dan. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-07-27Mark sync_pkg and sync_target as static functionsDan McGee1-6/+6
We no longer use these anywhere outside of sync.c, so do the rename and add static to their definition to meet our coding standards. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27Maintain a list of seen packages when installing a groupDan McGee1-4/+8
As reported in FS#20221, we don't always do the right thing when installing a group and using the --needed option. This was due to the code pulling packages based on what was already in the transaction's add list, but completely ignoring the fact that we may have already seen and skipped this same package in an earlier repository. Add a list to the private _alpm_sync_pkg() function that allows us to have this extra information so we don't mistakenly downgrade a package when using --needed. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-20Handle sync target + ignore properlyDan McGee1-1/+5
Rather than say we can't find the target after saying "No, I guess I don't want to install this", we should make sure the ignored status gets passed all the way through. This fixes FS#19866. Pactest is also included that failed before due to the fact that we normally treat an unfound package as a reason to exit with a non-zero status. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-18fix memory leak in _alpm_sync_commitJonathan Conder1-1/+2
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-18Partial fix for the phonon/qt issueNagy Gabor1-1/+5
This patch fixes the phonon/qt issue, if all to-be-upgraded packages are explicit targets (ie. only not-yet-installed packages are pulled by resolvedeps). This condition covers the most common situations, for example it should hold with every -Su operation. After this patch sync405.py passes, but sync406.py doesn't. The work is inspired by the patch of Henning Garus, thanks for his work: http://mailman.archlinux.org/pipermail/pacman-dev/2010-February/010429.html (I moved the alpm_list_diff computation to sync.c in order to compute it only once.) Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-14Fix a serious bug in the download codeNagy Gabor1-6/+6
After commit df99495b82 pacman downloaded files from the first repo only, and reported corrupted packages for all files from other repos. The download_size was set to 0 for _all_ transaction packages after downloading some files from the first repo. This code-block was moved to its correct place. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-05Compute package download size outside _alpm_sync_prepareJonathan Conder1-1/+14
And add a new info level for this piece of data. Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14Bump copyright dates to 2010Dan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11Fix "-Sd conflict_pkg" bugNagy Gabor1-15/+10
If the -d switch was invoked with -S (or -U), the removes list was simply lost, because trans->remove was computed in an "if(!(trans->flags & PM_TRANS_FLAG_NODEPS))" block. I've added a new pactest file, sync045.py (derived from sync043.py) to test this. Additionally, I did some other minor cleanups in sync_prepare: * preferred list is not needed anymore * I removed a needless alpm_list_remove_dupes line (the target list should not contain dupes at all) * I moved alpm_list_free(remove); to cleanup part to eliminate a possible memleak Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11typing: a few more fixes for special int typesDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-20sync.c : duplicate the target before modifying itXavier Chantry1-1/+0
It was probably a bad idea to modify the target directly in case of repo/pkg syntax. Duplicating it also allows us to keep the original target string, which is more informative when printing errors. Also remove a duplicated error message from libalpm, and improve the message already returned to the frontend. $ pacman -S foo/bar before error: repository 'foo' not found error: 'bar': no such repository after error: 'foo/bar': could not find repository for target Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-12Change the interface for target loadingXavier Chantry1-46/+118
-int alpm_trans_sysupgrade(int enable_downgrade); -int alpm_trans_sync(char *target); -int alpm_trans_add(char *target); -int alpm_trans_remove(char *target); +int alpm_sync_sysupgrade(int enable_downgrade); +int alpm_sync_target(char *target); +int alpm_sync_dbtarget(char *db, char *target); +int alpm_add_target(char *target); +int alpm_remove_target(char *target); * functions renaming * add new sync_dbtarget which allows to specify the db * repo/ syntax handling is moved to frontend ( should implement FS#15141) * group handling is moved to backend ( see http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html )
2009-09-08Remove transaction typeXavier Chantry1-67/+33
This basically started with this change : /* Transaction */ struct __pmtrans_t { - pmtranstype_t type; pmtransflag_t flags; pmtransstate_t state; - alpm_list_t *packages; /* list of (pmpkg_t *) */ + alpm_list_t *add; /* list of (pmpkg_t *) */ + alpm_list_t *remove; /* list of (pmpkg_t *) */ And then I have to modify all the code accordingly.
2009-09-08Use sync.c for upgrade transaction prepare and commitNagy Gabor1-46/+40
This patch utilizes the power of sync.c to fix FS#3492 and FS#5798. Now an upgrade transaction is just a sync transaction internally (in alpm), so all sync features are available with -U as well: * conflict resolving * sync dependencies from sync repos * remove unresolvable targets See http://www.archlinux.org/pipermail/pacman-dev/2009-June/008725.html for the concept. We use "mixed" target list, where PKG_FROM_FILE origin indicates local package file, PKG_FROM_CACHE indicates sync package. The front-end can add only one type of packages (depending on transaction type) atm, but if alpm resolves dependencies for -U, we may get a real mixed trans->packages list. _alpm_pkg_free_trans() was modified so that it can handle both target types _alpm_add_prepare() was removed, we use _alpm_sync_prepare() instead _alpm_add_commit() was renamed to _alpm_upgrade_targets() sync.c (and deps.c) was modified slightly to handle mixed target lists, the modifications are straightforward. There is one notable change here: We don't create new upgrade trans in sync.c, we replace the pkgcache entries with the loaded package files in the target list (this is a bit hackish) and call _alpm_upgrade_targets(). This implies a TODO (pkg->origin_data.db is not accessible anymore), but it doesn't hurt anything with pacman front-end, so it will be fixed later (otherwise this patch would be huge). I updated the documentation of -U and I added a new pactest, upgrade090.py, to test the syncdeps feature of -U. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-08Add a new reason field to pmconflict_t structNagy Gabor1-1/+1
Sometimes "foo conflicts with bar" information is not enough, see this thread: http://bbs.archlinux.org/viewtopic.php?id=77647. That's why I added a new reason field to our pmconflict_t struct that stores the packager- defined conflict that induced the fact that package1 conflicts with package2. I modified the front-end (in callback.c, sync.c, upgrade.c) to print this new information as well. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
2009-07-22Introduce -SuuNagy Gabor1-3/+15
If the user switches from unstable repo to a stable one, it is quite hard to sync its system with the new repo (the user will see many "Local is newer than stable" messages, nothing more). That's why I introduced -Suu, which treats a sync package like an upgrade, iff the package version doesn't match with the local one's. I added a new pactest (sync104.py) to test this, and I updated the documentation of -Su. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Dan: slight doc reword] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-20Fix 2 minor memleaksXavier Chantry1-0/+1
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-01Update copyright headers and messagesDan McGee1-1/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-06-13Enable remove progressbar with -S (conflict resolving)Nagy Gabor1-0/+1
$ sudo pacman -S mc Old output: *********** :: mc conflicts with mc-mp. Remove mc-mp? [Y/n] y ... (1/1) checking for file conflicts [################] 100% (1/1) installing mc [################] 100% New output: *********** :: mc conflicts with mc-mp. Remove mc-mp? [Y/n] y ... (1/1) checking for file conflicts [################] 100% (1/1) removing mc-mp [################] 100% (1/1) installing mc [################] 100% Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-06-08Give sensible feedback when a repo has no configured serversDan McGee1-1/+3
This fixes FS#14899. When running an -Sp operation without servers configured for a repository, we would segfault, so add an assert to the backend method returning the first server preventing a null pointer dereference. In addition, add a new error code to libalpm that indicates we have no servers configured for a repository. This makes -Sy and -S <package> operations fail gracefully and helpfully when a repo is set up with no servers, as the default mirrorlist in Arch is provided this way. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-06-07Introduce _alpm_pkg_free_trans()Nagy Gabor1-8/+3
The main purpose of this function to make our code more readable. It frees transaction specific fields of pmpkg_t. (It is used when a package is removed from the target list.) Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-06-06xdelta : only handle gz compression specificallyXavier Chantry1-7/+4
There is apparently no need to handle the re-compression manually when applying a xdelta patch in case of bzip2 or xz. Only gzip needs to be handled specifically for disabling timestamp with the -n option. After this patch, if xdelta is enhanced with xz support (1-line patch), it will be transparent from pacman side. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-05-18Remove find_replacements()Nagy Gabor1-120/+80
"Foo replaces bar" simply means that "foo is a new version of bar". So this patch refactors the code to use this "rule". _alpm_sync_sysupgrade now does the following for each local package [bar] (pseudo-code): for db in syncdbs { if(db contains bar) {check if db/bar is an upgrade; break;} replacers = find(bar replacers in db); if(replacers!=NULL) {ask_user; break;} } Note: 1. Replacers are grouped per repo. If more than one package replace bar in a repo, all of them are considered ("package set of bar replacers"). 2. If repo1/foo1 and repo2/foo2 both replaces bar, only repo1/foo1 is considered (if repo1 stands before repo2 in pacman.conf). FS#11737 is fixed. 3. It can happen that pacman doesn't consider any replacer, if it found a literal "earlier", so sync132.py modified accordingly (btw, that situation should not appear irl). The new sysupgrade code doesn't use sync_newversion(), so I removed the "local is newer than repo" message, which was annoying with -Qu and SyncFirst. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Look in target-list first to resolve dependenciesBryan Ischo1-2/+5
This fixes a bug introduced by my previous changes which changes the behavior of IgnorePkg/IgnoreGroup to allow the user to remove unresolvable packages from the transaction. The bug is that the target-list was no longer being consulted first to resolve dependencies, which means that if two packages in the sync database satisfied a dependency, and the user explicitly requested one of those two packages in the sync, the other package was still being pulled in. A new test was added, sync993.py, to verify the desired behavior. Signed-off-by: Bryan Ischo <bji-keyword-pacman.3644cb@www.ischo.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Remove duplicates from the unresolvable list before prompting userBryan Ischo1-0/+1
Signed-off-by: Bryan Ischo <bji-keyword-pacman.3644cb@www.ischo.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11const-ify endswith()Dan McGee1-3/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Remove pmsyncpkg_tNagy Gabor1-183/+68
pmsyncpkg_t data sructure was removed: 1. pmpkg_t.reason is used instead of pmsyncpkg_t.newreason. (The target packages come from sync repos, so we can use this field without any problems. Upgrade transaction also uses this field to store this info.) 2. pmsyncpkg_t.removes was moved to pmpkg_t.removes. This step requires careful programming, because we don't duplicate packages when we add them to trans->packages. So we modify sync pkgcache when we add this transaction-only info to our package. Hence it is important to free this list when we remove any package from the target list (remove_unresolvable, remove_conflicts, trans_free), otherwise this could confuse the new sync transactions (with non-pacman GUI). Overall, our code became ~100 line shorter, and we can call our helper functions directly on trans->packages in sync.c, we don't need to maintain parallel package lists. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Fix for trans001.py (FS#9088)Nagy Gabor1-47/+64
From now on _alpm_db_find_fileconflicts() works with upgrade and remove target lists (like checkdeps), which makes it transaction independent (we still need a trans param because of the progressbar). This is a small step towards the universal transaction. So we call this function directly from sync.c before commiting the remove transaction. This is much safer, but we can get false fileconflict error alarms in some tricky cases ("symlinks puzzle" etc). The patch on find_fileconflict looks complex, but it is mainly an "indent-patch", the new code-part can be found after the /* check remove list ... */ comment, and I modified something around the "file has changed hand" case (see comment modifications in the code). Unfortunately sync.c became more ugly, because we have to create 2 parallel internal transactions: to avoid duplicated work, upgrade transaction is used to load package data (filelists). This problem will disappear, when we finally get rid of internal transactions. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Free *data list when user removes unresolvable packagesNagy Gabor1-7/+9
Resolvedeps reports error when it cannot resolve some dependencies, puts them into the *data list, and set pm_errno. If user removes the unresolvable packages from the target list, we have no error anymore, so from now on we free *data list (we eliminate a memleak) and unset pm_errno. (Additionally I removed two needless lines from the code, unresolvable list is always freed in cleanup.) Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11New error type: PM_ERR_PKG_IGNOREDNagy Gabor1-1/+2
This patch fixes FS#12059. Now sync_addtarget can return with PM_ERR_PKG_IGNORED, which indicates that although the requested package was found it is in ignorepkg, so alpm could not add it to the transaction. So the front-end can decide what to do. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-03-15Fix several issues with xdeltaXavier Chantry1-55/+63
1) The changes to sync.c look big but there are mostly caused by the indentation. Fix a bug where download_size == 0 because the packages and deltas are already in the cache, but we still need to build the deltas list and apply the deltas to create the final package. 2) Fix the gzip / md5sum issue by switching to xdelta3, disabling external recompression and using gzip -n in pacman, and disable bsdtar compression and using gzip -n in makepkg. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-02-28libalpm: remove from_md5 and to_md5 from pmdelta_tXavier Chantry1-1/+0
The from_md5 and to_md5 fields were a nice extra safety, which would avoid trying to apply deltas on corrupted package files. However, they are not strictly necessary, since xdelta should be able to detect that on its own. The main problem is that it is impossible to compute these informations from the delta only. So repo-add would not be able to compute the delta entry based on just the delta file. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-23Don't prompt the user for unignore of IgnorePkg/IgnoreGroup packagesBryan Ischo1-2/+2
Don't prompt the user for unignore of IgnorePkg/IgnoreGroup packages, except for packages explicitly listed for sync by the user. This eliminates many unnecessary prompts when IgnorePkg/IgnoreGroup is used. Signed-off-by: Bryan Ischo <bryan@ischo.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-23Enabled new interactive prompt and updated some testsBryan Ischo1-5/+19
Enabled a new prompt to ask the user if they'd like to remove unresolvable packages from the transaction rather than failing it. Many pactest tests that used to fail now return success codes, because pacman now issues a prompt allowing the user to cancel rather than failing many transactions, and the pactest scripts always choose to cancel with no error rather than failing. The only net effect is that the return status of pacman is now 0 in cases where it used to be nonzero. Signed-off-by: Bryan Ischo <bryan@ischo.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-18Reorganize code for one-at-a-time resolvingBryan Ischo1-11/+36
This change reorganizes the internal code so that packages are resolved one at a time instead of all at once from a list. This will allow a future checkin to prompt the user to see if they'd rather remove unresolvable packages from the transaction and continue, or fail the transaction. This change does not affect the actual behavior of libalpm and all tests pass without changes. Signed-off-by: Bryan Ischo <bryan@ischo.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-31-Qu reworkNagy Gabor1-40/+12
From now on -Qu is an "outdated package" filter on local database. (This is a behaviour change.) This patch fixes some memleaks and makes the code cleaner, for details see my comment on FS#7884. FS#11868 is implemented. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25Change checkdeps and checkdbconflicts to be more flexible.Xavier Chantry1-1/+1
These two functions now take directly a package list rather than a database. checkdbconflicts was renamed to checkconflicts. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2008-08-23Move -Sp implementation to the front-endNagy Gabor1-28/+19
This patch kills one of our hackish pseudo transactions: PRINTURIS. (The other one is -Sw) From now on, front-end must not call trans_commit in case of -Sp, it should print the uris of target packages "by hand" instead. PRINTURIS flag was removed, NOCONFLICTS flag can be passed to skip conflict checks. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Cleanup of _alpm_pkg_compare_versions.Xavier Chantry1-9/+21
* Change the return values to be more informative. It was previously boolean, only indicating if a sync package was newer than a local package. Now it is a simple wrapper to vercmp, handling the force flag. * Remove the verbose output from _alpm_pkg_compare_versions. The "force" message is not so useful. The "package : local (v1) is newer than repo (v2)" message can be moved to -Su operation. For the -S operation, it is better to have something like : "downgrading package from v1 to v2" * Don't display the "up to date -- skipping" and "up to date -- reinstalling" messages, when the local version is newer than the sync one. * Fix the behavior of --needed option to not skip a target when the local version is newer, and clarify its description. * Add a new alpm_pkg_has_force function This allows us to access the pkg->force field like any other package fields. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-19Rephrase some debug messages in alpm/sync.cNagy Gabor1-5/+6
Debug messages were removed from _alpm_sync_find, because it is a general purpose function; debug messages should be placed in the caller function. I inserted "adding package foo-1.0-1 to the transaction targets" debug message to find_replacements and sync_sysupgrade. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-13sync_addtarget reworkNagy Gabor1-43/+25
Now '-S provision' handling is done in the back-end. In case of multiple providers, the first one is selected (behavior change: deleted provision002.py). The old processing order was: literal, group, provision; the new one: literal, provision, group. This is more rational, but "pacman -S group" will be slower now. "pacman -S repo/provision" also works. Provision was generalized to dependencies, so you can resolve deps by hand: "pacman -S 'bash>2.0'" or "pacman -S 'core/bash>2.0'" etc. This can be useful in makepkg dependency resolving. The changes were documented in pacman manual. alpm_find_pkg_satisfiers and _alpm_find_dep_satisfiers functions were removed, since they are no longer needed. I added some verbosity to "select provider instead of literal" and "fallback to group". Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-07Resolvedeps reworkNagy Gabor1-8/+4
I divided resolvedeps into 2 functions. The new _alpm_resolvedep function will resolve one dependency, for example the 'foo>=1.0-1' dependency. It can be useful in sync_addtarget refactoring. The resolvedeps parameters were changed, to be coherent with recursedeps: * the target-list is an alpm_list* instead of alpm_list**. This is OK, because alpm_list_add == alpm_list_add_last * syncpkg param was removed. list contains the to-be-installed packages, resolvedeps will add the required dependencies into this list * trans param was removed, it was used in QUESTION() only, which can be used on the main (handle->trans) transaction only (because the front-end cannot access our pseudo-transactions at all!). The patch fixes some wrong dynamic pmdepmissing_t usage. I did a behavior change (and sync1003.py was modified accordingly), which needs some explanation: The old resolvedeps didn't elect packages from 'remove' list. I've dropped this because I don't want that 2nd excluding list param. In fact, in real life, we ~never need this rule. Resolvedeps is called before checkconflicts, so only -Su's %REPLACES% packages are sitting in 'remove' list. This means, that we have the replacement packages in our target list. Usually "foo replaces bar" means, that bar isn't in our repos any more, so resolvedeps *cannot* elect it; but usually it won't try it at all, because foo is in the target list, and it is expected to satisfy 'bar>=1.0-1'-like dependencies too. Since checkdeps and checkconflicts is done after resolvedeps, this cannot cause any harm. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04Reimplement TotalDownload functionalityDan McGee1-1/+19
Add a new totaldlcb callback function to libalpm and make pacman utilize it when the TotalDownload option is enabled. This callback function is pretty simple- it is meant to be called once at the beginning of a "list download" action, and once at the end (with value 0 to indicate the list has been finished). The frontend is responsible for keeping track of adding individual file download amounts to the total xfered amount in order to display some sort of overall progress. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04Use correct C type for file sizesDan McGee1-6/+7
We have been using unsigned long as a file size type for a while, which works but isn't quite correct and could easily break. Worse was probably our use of int in the download callback functions, which could be restrictive for packages > 2GB in size. Switch all file size variables to use off_t, which is the preferred type for file sizes. Note that at least on Linux, all applications compiled against libalpm must now be sure to use large file support, where _FILE_OFFSET_BITS is defined to be 64 or there will be some weird issues that crop up. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-13Cleanup usages of alpm_list_find and alpm_list_remove.Chantry Xavier1-9/+10
* remove obsolete and unused *_cmp helper functions like deppkg_cmp and _alpm_grp_cmp * new alpm_list_remove_str function, used 6 times in handle.c * remove _alpm_prov_cmp / _alpm_db_whatprovides and replace them by a more general alpm_find_pkg_satisfiers with a cleaner implementation. before: alpm_db_whatprovides(db, targ) after: alpm_find_pkg_satisfiers(alpm_db_getpkgcache(db), targ) * remove satisfycmp and replace alpm_list_find + satisfycmp usage by _alpm_find_dep_satisfiers. before : alpm_list_find(_alpm_db_get_pkgcache(db), dep, satisfycmp) after : _alpm_find_dep_satisfiers(_alpm_db_get_pkgcache(db), dep) * remove _alpm_pkgname_pkg_cmp, which was used with alpm_list_remove, and use _alpm_pkg_find + alpm_list_remove with _alpm_pkg_cmp instead. This commit actually get rids of all complicated and asymmetric _cmp functions. I first thought these functions were worth it, be caused it allowed us to reuse list_find and list_remove. But this was at the detriment of the clarity and also the ease of use of these functions, dangerous because of their asymmetricity. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-13Swap the parameters of alpm_pkg_findNagy Gabor1-3/+3
Now the syntax is coherent with alpm_list_find and alpm_sync_find. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-26Fix some fallout from the delta/download changesDan McGee1-4/+14
We removed one too many FREELIST() calls when trying to fix some memleaks, and add a safety/sanity check to ensure filename is set, as packages in old DBs are likely to not have this field. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-26get_filename : use the FILENAME db field only.Chantry Xavier1-0/+4
Reference : FS#9547. The get_filename function first tries to get the filename field from the database, and if it doesn't find it, it tries to guess it based on the name, version and arch. This field was introduced in 3.0, but there are still many old entries in the official databases without it. So the databases need to be regenerated first before this patch can be applied. There is a second problem with the delta code, which needs the filename for locally installed packages too, but this field is not present in the local db. So the delta code needs to be fixed first. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-26libalpm/sync.c : memleak fixes.Chantry Xavier1-9/+8
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>