summaryrefslogtreecommitdiffstats
path: root/lib/libalpm/be_package.c
AgeCommit message (Collapse)AuthorFilesLines
2012-01-02be_package.c: fix compiler warningAllan McRae1-1/+1
be_package.c: In function 'parse_descfile': be_package.c:181:28: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] ptr - key + 2 is guaranteed to be > 0 so we can cast to size_t Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-23be_package: be more explicit parsing key/value pairsDan McGee1-9/+12
This eliminates the need for strtrim() usage completely, instead relying on the fact that the only allowed delimiter between key and value is the " = " string. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-21include config.h via MakefilesDave Reisner1-2/+0
Ensures that config.h is always ordered correctly (first) in the includes. Also means that new source files get this for free without having to remember to add it. We opt for -imacros over -include as its more portable, and the added constraint by -imacros doesn't bother us for config.h. This also touches the HACKING file to remove the explicit mention of config.h as part of the includes. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Add helper method for creating and opening archive objectDan McGee1-35/+35
This moves the common setup code of about 5 different callers into one method. Error messages will now be common and shared in all places; several paths did not have any messages at all before. In addition, we now pick an ideal block size for the archive read based off the larger value of our default buffer size or the st.st_blksize field. For a filesystem such as NFS, this is often much larger than the default 8192- values such as 32768 and 131072 are common. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Convert package and database archive reads to use file descriptorsDan McGee1-18/+32
This gives us a bit more control and over the archive reading process, and a bit less is done behind the scenes. It also allows us to use fstat() in preference to stat(), which should avoid some potential race conditions. Some reorganization is necessary to move the stat calls after the open() calls. Error handling and cleanup in general is also improved, as we had several potential memory and file handle leaks before in some error paths. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-27Introduce ALPM_BUFFER_SIZE constantDan McGee1-2/+2
This takes the place of three previously used constants: ARCHIVE_DEFAULT_BYTES_PER_BLOCK, BUFFER_SIZE, and CPBUFSIZE. In libarchive 3.0, the first constant will be no more, so we can ensure we are forward-compatible by removing our usage of it now. The rest are unified for consistency. By default, we will use the value of BUFSIZ provided by <stdio.h>, which is 8192 on Linux. If that is undefined, a default value is provided. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Don't realloc a 0-length files array when loading packagesDan McGee1-8/+10
There is some pecular behavior going on here when a package is loaded that has no files, as is very common in our test suite. When we enter the realloc/sort code, a package without files will call the following: files = realloc(NULL, 0); One would assume this is a no-op, returning a NULL pointer, but that is not the case and valgrind later reports we are leaking memory. Fix the whole thing by skipping the reallocation and sort steps if the pointer is NULL, as we have nothing to do. Note that the package still gets marked as 'files loaded', becuase although there were none, we tried and were successful. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Add _alpm_process_siglist() logic to failed package validationDan McGee1-0/+1
This moves the result processing out of the validation check loop itself and into a new loop. Errors will be presented to the user one-by-one after we fully complete the validation loop, so they no longer overlap the progress bar. Unlike the database validation, we may have several errors to process in sequence here, so we use a function-scoped struct to track all the necessary information between seeing an error and asking the user about it. The older prompt_to_delete() callback logic is still kept, but only for checksum failures. It is debatable whether we should do this at all or just delegate said actions to the user. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Pass package signature data up one more levelDan McGee1-8/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Allow our PGP helper method to pass back the signature resultsDan McGee1-1/+6
This will make its way up the call chain eventually to allow trusting and importing of keys as necessary. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Extract an _alpm_pkg_validate_internal() methodDan McGee1-33/+56
_alpm_pkg_load_internal() was becoming a monster. Extract the top bit of the method that dealt with checksum and signature validation into a separate method that should be called before one loads a package to ensure it is valid. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18Remove const specifier from changelog_read() void parameterDan McGee1-1/+1
This shouldn't really be declared with const, and causes a compile error when -Wcast-qual is used. Remove the const specifier from the function specification and all implementations. Also fix one other trivial -Wcast-qual warning in _alpm_db_cmp(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-07Ensure PackageRequired works as expectedDan McGee1-6/+7
Changes in commit dc3336c277 caused this to stop working as expected for sync packages, due to the way the logic is structured. Ensure we always enter the signature code if the bitflag is flipped on to check signatures for packages. Rename 'use_sig' to 'has_sig' for clarity. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Parse > 2GiB file sizes correctlyDan McGee1-1/+1
We were using atol(), which on 32 bit, cannot handle values greater than 2GiB, which is fail. Switch to a strtoull() wrapper function tailored toward parsing off_t values. This allows parsing of very large positive integer values. off_t is a signed type, but in our usages, we never parse or have a need for negative values, so the function will return -1 on error. Before: $ pacman -Si flightgear-data | grep Size Download Size : 2097152.00 K Installed Size : 2097152.00 K After: $ ./src/pacman/pacman -Si flightgear-data | grep Size Download Size : 2312592.52 KiB Installed Size : 5402896.00 KiB Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Better error handling out of package load methodDan McGee1-1/+1
There are many other ways to fail a package load other than "file not found". We should also use the correct error code in this case. Clean it up a bit in the various callers. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Refactor some args out of pkg_load_internalDan McGee1-32/+34
Just pass the entire sync package in if we have it; that way we can do any necessary operations involving it rather than have a parameter list growing endlessly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Remove argument from check_pgp_helperDan McGee1-1/+2
This one wasn't all that necessary as we only used it in one place in the function, which can be checked easily enough at the call site. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15Only check necessary signatures and checksumsDan McGee1-5/+17
The precedence goes as follows: signature > sha256sum > md5sum Add some logic and helper methods to check what we have available when loading a package, and then only check what is necessary to verify the package. This should speed up sync database verifies as we no longer will be doing both a checksum and a signature validation. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15Parse conflicts/provides/replaces at database load timeDan McGee1-3/+6
We did this with depends way back in commit c244cfecf654d3 in 2007. We can do it with these fields as well. Of note is the inclusion of provides even though only '=' is supported- we'll parse other things, but no guarantees are given as to behavior, which is more or less similar to before since we only looked for the equals sign. Also of note is the non-inclusion of optdepends; this will likely be resolved down the road. The biggest benefactors of this change will be the resolving code that formerly had to parse and reparse several of these fields; it only happens once now at load time. This does lead to the disadvantage that we will now always be parsing this information up front even if we never need it in the split form, but as these are uncommon fields and our parser is quite efficient it shouldn't be a big concern. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15Validate the sha256sum if availableDan McGee1-4/+17
Adjust load_internal() to check the sha256sum value if we have it. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-08Attempt to fix up some of the brokenness around failed package loadsDan McGee1-1/+1
This is a bit of a mess, due to the fact that we have a progress meter running. It is also ironic that we are in the midst of a method named "commit" when we haven't done a damn thing yet, and can still fail hard if either a checksum or signature is invalid or unrecognized. Adapt the former test_md5sum method to be invoked for any of the various failure types, which at least gives the user some indication of what packages are failing. A second patch will be needed to actually show worthwhile error codes, but this is going to involve modifying the actual data passed with the callback. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-08Store a package info level flag if we fail to load dataDan McGee1-2/+2
If we are missing a local database file, we get repeated messages over and over telling us the same thing, rather than being sane and erroring only once. This package adds an INFRQ_ERROR level that is added to the mask if we encounter any errors on a local_db_read() operation, and short circuits future calls if found in the value. This fixes FS#25313. Note that this does not make any behavior changes other than suppressing error messages and repeated code calls to failure cases; we still have more to do in the "local database is hosed" department. Also make a small update to the wrong but unused flags set in be_package; using INFRQ_ALL there was not totally correct. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-02Don't trim whitespace when reading database entriesDan McGee1-4/+3
We don't write with extra or unknown whitespace, so there is little reason for us to trim it when reading either. This also fixes the hopefully never encountered "paths that start or end with spaces" issue, for which two pactests have been added. The tests also contain other evil characters that we have encountered before and handle just fine, but it doesn't hurt to ensure we don't break such support in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-21Convert package filelists to an array instead of linked listDan McGee1-13/+73
This accomplishes quite a few things with one rather invasive change. 1. Iteration is much more performant, due to a reduction in pointer chasing and linear item access. 2. Data structures are smaller- we no longer have the overhead of the linked list as the file struts are now laid out consecutively in memory. 3. Memory allocation has been massively reworked. Before, we would allocate three different pieces of memory per file item- the list struct, the file struct, and the copied filename. What this resulted in was massive fragmentation of memory when loading filelists since the memory allocator had to leave holes all over the place. The new situation here now removes the need for any list item allocation; allocates the file structs in contiguous memory (and reallocs as necessary), leaving only the strings as individually allocated. Tests using valgrind (massif) show some pretty significant memory reductions on the worst case `pacman -Ql > /dev/null` (366387 files on my machine): Before: Peak heap: 54,416,024 B Useful heap: 36,840,692 B Extra heap: 17,575,332 B After: Peak heap: 38,004,352 B Useful heap: 28,101,347 B Extra heap: 9,903,005 B Several small helper methods have been introduced, including a list to array conversion helper as well as a filelist merge sort that works directly on arrays. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-05signing: move to new signing verification and return schemeDan McGee1-11/+9
This gives us more granularity than the former Never/Optional/Always trifecta. The frontend still uses these values temporarily but that will be changed in a future patch. * Use 'siglevel' consistenly in method names, 'level' as variable name * The level becomes an enum bitmask value for flexibility * Signature check methods now return a array of status codes rather than a simple integer success/failure value. This allows callers to determine whether things such as an unknown signature are valid. * Specific signature error codes mostly disappear in favor of the above returned status code; pm_errno is now set only to PKG_INVALID_SIG or DB_INVALID_SIG as appropriate. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-03Merge remote-tracking branch 'allan/ALPM'Dan McGee1-29/+29
Conflicts: lib/libalpm/be_local.c lib/libalpm/be_package.c lib/libalpm/conflict.c lib/libalpm/diskspace.c lib/libalpm/dload.c lib/libalpm/remove.c
2011-07-03Move alpm filelists to a struct objectDan McGee1-3/+11
This allows us to capture size and mode data when building filelists from package files. Future patches will take advantage of this newly available information, and frontends can use it as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-02Prefix _alpm_errno_t members with ALPMAllan McRae1-14/+14
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-07-02Prefix alpm_loglevel_t members with ALPMAllan McRae1-15/+15
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmbackup_t to alpm_backup_tAllan McRae1-2/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmdepend_t to alpm_depend_tAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmpkg_t to alpm_pkg_tAllan McRae1-11/+11
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmhandle_t to alpm_handle_tAllan McRae1-3/+3
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-24Remove three unnecessary usages of alpm_list_count()Dan McGee1-2/+3
For the files count when loading from a package, we can keep a counter. The two in the frontend were completely useless due to the fact that if sync_dbs is non-NULL, alpm_list_count() will always be greater than 0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-22Convert backup list to new pmbackup_t typeDan McGee1-1/+4
This allows us to separate the name and hash elements in one place and not scatter different parsing code all over the place, including both the frontend and backend. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-20Documented purpose of be_*.cKerrick Staley1-1/+1
Added a line to the top of each of be_local.c, be_package.c, and be_sync.c indicating their purposes. Signed-off-by: Kerrick Staley <mail@kerrickstaley.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14Ensure handle is valid and pm_errno is reset when calling into APIDan McGee1-1/+1
We didn't do due diligence before and ensure prior pm_errno values weren't influencing what happened in further ALPM calls. I observed one case of early setup code setting pm_errno to PM_ERR_WRONG_ARGS and that flag persisting the entire time we were calling library code. Add a new CHECK_HANDLE() macro that does two things: 1) ensures the handle variable passed to it is non-NULL and 2) clears any existing pm_errno flag set on the handle. This macro can replace many places we used the ASSERT(handle != NULL, ...) pattern before. Several other other places only need a simple 'set to zero' of the pm_errno field. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14Small handle related cleanupsDan McGee1-2/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-13Switch all logging to use handle directlyDan McGee1-17/+17
This is the last user of our global handle object. Once again the diff is large but the functional changes are not. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-13Move pm_errno onto the handleDan McGee1-20/+20
This involves some serious changes and a very messy diff, unfortunately. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-13Require handle for alpm_pkg_load()Dan McGee1-8/+8
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-13Fix memory leak if package sig was invalidDan McGee1-0/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09Require handle argument to all alpm_option_(get|set)_*() methodsDan McGee1-1/+1
This requires a lot of line changes, but not many functional changes as more often than not our handle variable is already available in some fashion. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Use standard errno codes in return from _alpm_archive_fgetsDan McGee1-3/+7
This allows us to not require the context (e.g. handle) when calling this function. Also beef up the checks in the two callers of this function to bail if the last return code is not ARCHIVE_EOF, which is the expected value. This requires a change to one of the pactest return codes and the overall result of the test, but results in a much safer operating condition whereby invalid database entries will stop the operation. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Push down extern handle variable to files that need itDan McGee1-0/+3
This will make the patching process less invasive as we start to remove this variable from all source files. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Add handle attribute to pmpkg_t structDan McGee1-0/+2
Similar to what we just did for the database; this will make it easy to always know what handle a given package originated from. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Remove ALPM_LOG_FUNC macroDan McGee1-8/+0
The usefulness of this is rather limited due to it not being compiled into production builds. When you do choose to see the output, it is often overwhelming and not helpful. The best bet is to use a debugger and/or well-placed fprintf() statements. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-05-04Deal with unused function parameters correctlyAllan McRae1-2/+2
This started off removing the "(void)foo" hacks to work around unused function parameters and ended up fixing every warning generated by -Wunused-parameter. Dan: rename to UNUSED. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-24Perform package verification at package load timeDan McGee1-7/+27
Both md5sum verification and PGP verification can and should be done at package load time. This allows verification to happen as early as possible for packages provided by filename and loaded in the frontend, and moves more stuff out of sync_commit that doesn't really belong there. This should also set the stage for simplified parallel loading of packages later down the road. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-24signing: let GPGME handle loading signatures from filesDan McGee1-6/+0
Rather than go through all the hassle of doing this ourselves, just let GPGME handle the work by passing it a file handle. Signed-off-by: Dan McGee <dan@archlinux.org>