Age | Commit message (Collapse) | Author | Files | Lines |
|
For future possibilities, don't extract any files that start with '.'.
This will allow us to add features such as the ChangeLog viewing without
having to wait to include these files in packages, because older versions
of pacman will be forward compatable with 'hidden' files at the root level
of the package.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was a bad way to fix a problem upstream. Doing this resulted in
symlink permissions being applied to files installed on the system, leaving
some binaries with 77 permission, etc.
This reverts commit 4e6b7c1cde4c0ac1d035b51f9af19510a7c9135e.
|
|
Add some 'const' keywords all over the code to make it a bit more strict on
what you can and can't do with data. This is especially important when we
return pointers to the pacman frontend- ideally this would always be
untouchable data.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This code depends on /etc/mtab existance, which is not very reliable in all
cases, especially in a chroot or non-Linux environment. Dump it for now
until we can find a better way.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Hackish fix to ensure libarchive extracts files and dirs with the right
permissions. For some reason extracting /tmp on install wasn't handled properly
by librachive, so an explicit chmod will fix this.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
* Remove some unnecessary conditional compiling in util.h- move the
functions tha required it to trans.c (along with a bunch of new header
includes).
* Clean up util.h a bit- remove some header includes, remove universal
libarchive include and only put it in the files that need it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We don't use this functionality for now, so get rid of it and the
functions associated with it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove an unnecessary macro, and get rid of the void pointer.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove inclusion of libintl.h from all files, because we can do it once
in util.c where the _() macro is defined.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
forward-porting some 3.0.2 changes
* Nagy's ldconfig fix
* 3 new pactests to check if ldconfig runs
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
|
|
this point
|
|
* Skip running scriptlet when chroot fails - to prevent issues in the host
filesystem
|
|
the alpm strcmp operation which takes void* references.
* We had this great visibility patch, but never actually took advantage of
it. Added the right compile flag to make it work and added some more
SYMEXPORTs where necessary to have a successful compile.
|
|
the output of this message (simple fix- remove .pacorig from your
translated message).
|
|
reordering and adding ones that were forgotten (noticed when trying to
compile after reordering).
* Updated the HACKING file to include information on #include usage.
* print -> vprint in "making dir" function in pactest.
|
|
specified
* Use db->path when appropriate
* Commented out the FAKEROOT checks in libalpm. This should never ever be done.
TODO test this quite a bit, as this will never cause the transactions to fail
if RW operations are requested... right now it is totally up to the front end
to decide when to fail
* Use realpath() to canonicalize the root path when specified, so
_alpm_makepath() doesn't freak out
* Fixed some output/indent of MDFile and SHAFile algorithms
* More efficient sprintf() usage in MDFile/SHAFile
* Added real error output to _alpm_makepath
|
|
anyway.
* Spelling/commenting etc.
|
|
* Moved entirely to alpm_pkg_get_* accessors, to read data on demand
* Mostly removed the INFRQ_ parameters from outside the be_files backend (making
the backend more extensible in the long run)
* packages created from _alpm_db_scan now have the db and origin set (making
accessors actually work for these packages)
* removed _alpm_db_ensure_pkgcache
* totally revamped the _alpm_checkconflicts function, making it cleaner and
easier to read (and thus fix in the long run) - maintainable code ftw
NOTE: feel free to rename the functions... I couldn't think of anything better
* removed an extra loop in sync.c:find_replacements - no sense in looping over
an entire DB while strcmp'ing the name, when we have get_pkgfromcache
Other:
* package struct "license" -> "licenses"
* Created _alpm_sync_find (duplicate code in some places, find_pkginsync
* Minor const correctness changes along the way
* fixed a couple extra '/' pathing issues (non-issues really)
* removed a duplicate pkg_cmp function
|
|
* Added some provision switching hackery. This could probably use some
refactoring,.. it solves the following case:
pkg1 and pkg2 provide 'foo' and are both installed
pkg3 depends on 'foo' and so lists 'pkg1' in the REQUIREDBY db section
pkg1 is upgraded and no longer provides 'foo'
** This code ensures that the REQUIREDBY of pkg3 is updated to require pkg2
now instead of pkg1
|
|
* Unified some functions names "package" -> "pkg" for consistency
* Removed the goofy 'faketarget' stuff used for dep testing
* Renamed alpm_pkg_isin -> alpm_pkg_find
* Renamed alpm_db_readpkg -> alpm_db_get_pkg
|
|
* Fixed a segfault in the conflict checking code
* Added an automatic failure in the case of -A/-U for a replacement of an
existing package. This requires a large amount of work and is postponed for
now. Example:
If ncmpc is installed, pacman -U /path/to/ncmpc-svn.pkg.tar.gz will fail
with and appropriate error message
|
|
track down the great "Codemac Segfault"
* Fixed sortdeps - use the alpm_pkg_get functions to ensure data
|
|
from one package to another seemlessly (knock on wood). This is implemented
through the use of two skip lists in the trans struct- skip_add and
skip_remove, which replace the former trans->skiplist.
* Removed an unnecessary function parameter, added a necessary one.
* If a package has no backup files, print '(none)' under the heading so it is
more obvious.
* Updated my TODO list.
|
|
object
|
|
- the code should be clearer, more organized, commented, and have worthwhile
variable names now
- proactive backup=()s now work. That is, adding a file to a backup array
does what it should on the upgrade to that package, no longer forcing you to
wait a full upgrade cycle for it to take effect
* ldconfig was being run twice on an upgrade operation - fixed
* fixed another pm_fprintf/printf output corruption with the progress bars
* refactored some duplicate code for adjusting 'requiredby' lists
* Added config.rpath to .cvsignore
|
|
alpm_pkg_get functions to do this.
|
|
from the PKGINFO, and size is the stat() size of the archive
* Removed the useless 'output' param from package.c:parse_descfile
* Installation progress
- Call progress callback once at 0% for initialization
- 'needdisp' was useless
- alpm_list_count is called an excessive amount in these nested loops. Now we
only call it once per iteration
- Use the compressed sizes for PROGRESS calcs as uncompressed (isize) is not
exact (it is missing metadata sizes), and thus produces > 100% numbers
|
|
* downloaded packages now pass ONLY the package name to the callback
|
|
already done (alpm_pkg_vercmp). I dropped this change, making versioncmp "private" again. (alpm_versioncmp -> _alpm_versioncmp, hidden symbol)
* Make alpm_get_upgrades use the same version check that -Su and -S use.
|
|
|
|
* The --debug params were goofy. New setup allows --debug without params,
--debug=<level> where level 1=debug output, 2=debug and download output,
3=debug, download, and function tracing output. This seems more sane to me.
* Removed PM_LOG_FLOW1 and PM_LOG_FLOW2. They were just confusing. When adding
new functions, it is near impossible to determin if your output should be
"flow1" or "flow2" without tracking all the way up the call chain. Rarely
would one ever say "ok, lets just show "flow2" output. These have both been
replaced with PM_LOG_DEBUG
* Removed the need for the root parameter on alpm_initialize. it is now
defaulted to PM_ROOT just like dbpath and cachedir. This allows alpm to be
initialized BEFORE option parsing in the front end, saving us some duplicate
variables in the frontend.
* Cleaned up front end variables due to early alpm_initialize call.
|
|
|
|
* ALPM_LOG_FUNCTION macro and all the great work to add this macro everywhere
|
|
* gcc visiblity changes
Also modified _alpm_versioncmp -> alpm_versioncmp (public function) as per K.
Piche's suggestions
|
|
* Fix up add.c a bit better than it was in regards to FS #3492.
* Optimized the sqrt call in dependency cycle checking to a single call.
* Removal of an outdated comment.
|
|
* alpm_list_is_in --> alpm_list_find
* alpm_list_is_strin --> alpm_list_find_str
* Flip parameters of both functions to be inline with rest of alpm_list.
First commit, woohoo.
|
|
optimizations in order to make the code much more readable and
type-checkable. Every enum in the library now has it's own type that
should be used instead of the generic 'unsigned char'. In addition,
several #define statements dealing with constants were converted to
enums.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
|
|
* renamed pmlist_t -> alpm_list_t
* made alpm_list_t a public type (alpm_list.h header)
* removed additional storage for registered DBs in pacman source
* some code cleanup
* removed duplicate (pm)list_display functions from pacman source
* misc code cleanup
|
|
* fix "warning: dereferencing type-punned pointer will break strict-aliasing rules"
|
|
|
|
properly remove entries from "Required By" instead of wiping it out entirely
|
|
|
|
|
|
|
|
* formatting / indentation fixes
* makepkg:
Dan McGee <dpmcgee@gmail.com> - integrity check fix
Jürgen Hötzel <juergen@hoetzel.info> - EUID usage and "x$foo" check revamp
|
|
http://www.archlinux.org/pipermail/pacman-dev/2006-December/000792.html
* configure fixes (CFLAGS)
* no-strict-aliasing hacks until full C99 compliance
* --with-config-file configure option
|
|
* IgnorePkg and --ignore work again
* Partial changes to support removal of conflicts for -U and -A (INCOMPLETE)
|