summaryrefslogtreecommitdiffstats
path: root/etc
AgeCommit message (Collapse)AuthorFilesLines
2012-01-18Allow UseDelta option to specify a delta ratioDan McGee1-1/+1
Rework the frontend and backend to allow passing a ratio value in for UseDelta rather than having a hardcoded #define-d 0.7 value always used. This is useful for those with fast connections, who would likely benefit from tuning this ratio to lower values; it is also useful for general testing purposes. The libalpm API changes for this, but we do support the old config file format with a no-value 'UseDelta' option; in this case we simply use the old default of 0.7. We clamp the ratio values to a sane range between 0.0 and 2.0, allowing ratios above 1.0 for testing purposes. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-08Use automake verbose helpers in custom make rulesDan McGee1-4/+3
This converts our script generation to use the built-in AM_V_GEN macro, which honors the V= setting passed to make and allows one to see the full command if they truly desire. The AM_V_at macro is also used in place of an explicit @ so verbose-mode compiles show all commands being run. We can also use these two macros in doc generation to quiet it down to the level we expect. Other minor changes: * a pointless test call is removed in test/pacman/tests/ * sed is used instead of dos2unix as we depend on it anyway * consecutive chmod calls are reduced to a single call (e.g., '+x,a-x') Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15makepkg.conf: disable motd printing for rsync DLAGENTDave Reisner1-1/+1
Fixes FS#26806. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05Enable CheckSpace by default in default config fileDan McGee1-3/+3
This will have to be picked up downstream of course, but addresses FS#25684 now that this is a lot faster in 4.0 than it was in the original 3.5 implementation. Also make curl the first XferCommand listed, as we are moving away from any other download program at this point. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15Add short example signature config to pacman.confDan McGee1-0/+5
This is similar to what we do with every other option. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15build-sys: always use $(RM) instead of rm -fDave Reisner1-1/+1
These are equivalent. Use the autoconf macro for consistency. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11build: remove mucking with CARCHFLAGSDan McGee2-6/+3
We've never received an update to this, and gcc has sane defaults out of the box anyway, as do most projects in their build systems. Remove the magic here and just let downstream distros handle any changes or additions necessary, as we already do for LDFLAGS. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-18makepkg.conf: remove curl from other common toolsAllan McRae1-1/+1
It is now set as the main tool, so make wget another common one. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-22makepkg: allow specifying alternative build directoryAllan McRae1-0/+3
Add a BUILDDIR variable (which can be overridden in the environment) to specify an alternative location for building the package. This is useful for people who want to build on a different filesystem for improved performance (e.g. tmpfs). Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-22makepkg: Add UPX compression supportAllan McRae1-2/+3
This patch enables the automatic compression of executable binaries using UPX when the 'upx' options is specified in makepkg.conf or the PKGBUILD. Additional arguments can be passed to UPX by specifying the UPXFLAGS variable. Original-patch-by: Bryce Gibson <bryce@gibson-consulting.com.au> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-01Update pacman manpage and pacman.conf for gpgdirPang Yan Han1-0/+1
pacman.8.txt --gpgdir section is updated based on the pacman.conf manpage pacman.conf is updated to include the default GPGDir Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20Add configure option to specify package signing keyAllan McRae1-0/+2
Add the "GPGKEY" option to makepkg.conf for specifying signing packages with the non-default key from the keyring. Is overridded by makepkg's --key option. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20New VerbosePkgLists optionJakob Gruber1-0/+1
If enabled, displays package lists for upgrade, sync and remove operations formatted as a table. Falls back to default list display if insufficient terminal columns are available. Example output: :: Starting full system upgrade... :: Replace libjpeg with testing/libjpeg-turbo? [Y/n] resolving dependencies... looking for inter-conflicts... Remove (1): Name Old Version Size libjpeg 8.3.0-1 0.83 MB Total Removed Size: 0.83 MB Targets (5): Name Old Version New Version Size libjpeg-turbo 1.1.0-1 0.20 MB linux-firmware 20110201-1 20110227-1 8.23 MB ncurses 5.7-4 5.8-1 0.92 MB ppl 0.11.1-1 0.11.2-1 2.74 MB v4l-utils 0.8.1-1 0.8.3-1 0.23 MB Total Download Size: 12.32 MB Total Installed Size: 58.82 MB Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20Remove ShowSize optionJakob Gruber1-1/+0
Dan: The commit message originally referenced "VerbosePkgLists", but I'm going to change the name of the option. In addition, this patch serves a purpose being standalone- we should really do things like this with -S --print and hopefully -Q --print in the future. Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23etc/makepkg.conf: use curl in place of wget as a DLAGENTDave Reisner1-3/+3
Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-22Add GPG signature support to makepkgGeoffroy Carrier1-2/+3
This is a rather simple patch to add signing support to makepkg. Add a create_signature() to makepkg, add a 'sign' BUILDENV option in makepkg.conf, and document the changes in the makepkg.conf manpage. Signed-off-by: Geoffroy Carrier <geoffroy.carrier@koon.fr> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-29Merge branch 'maint'Dan McGee1-1/+1
2011-01-28Enable failure on server error for curl download commandDan McGee1-1/+1
This will make a 404 a silent failure that returns an error code rather than 0 as was previously done, screwing up the logic used by pacman/libalpm to allow moving onto the next server on a failed download. Fixes FS#22630. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29makepkg: Add check() function for running test suitesAllan McRae1-2/+3
A PKGBUILD can have an option check() function for running test suites between the build() and package() stages. This function is run by default but can be disabled globally in with "!check" in BUILDENV in makepkg.conf. This setting can be controlled on an individual package basis using makepkg's --check and --nocheck flags. Addition dependencies needed for running the test suite can be specified in the checkdepends array and are only checked when running the check() function. Original-work-by: Jeff C <jeff@kcaccess.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Add configuration option to control disk space checkingAllan McRae1-0/+1
Disk space checking is likely to be an unnecessary bottleneck to people with reasonable partition sizes so add a configuration option to allow it to be disabled/enabled as wanted. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-05makepkg: remove STRIP_DIRSAllan McRae1-3/+1
For binary packages, the majority of the time used in the debugs symbol stripping process is the actual stripping of the binaries/libraries and not the testing of which files to strip. This allows more complete stripping of packages that install to "non-standard" paths that would not be generally included in makepkg.conf. Any performance hit that may be apparent for (_large_) "arch=('any')" packages can readily be avoided by disabling stripping in the PKGBUILD options array. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14makepkg: make strip options configurableCedric Staniewski2-0/+9
The newly added variables STRIP_BINARIES, STRIP_SHARED and STRIP_STATIC, that are set in makepkg.conf, specify the strip options used on binaries and shared and static libraries. In addition, files are now stripped more aggressively by default. Implements FS#13592 the way it was suggested by Allan in the comments. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-01-19makepkg: Introduce $SRCPKGDESTNezmer1-0/+2
Introduce $SRCPKGDEST to define a destination dir for source packages instead of saving them in $PKGDEST with binary packages. The simple patch doesn't break old behavior. Signed-off-by: Nezmer <git@nezmer.info> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15pacman.conf : enable resuming for curlXavier Chantry1-1/+1
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06Allow $arch to be used in ServerXavier Chantry1-1/+2
similarly to the $repo variable, Server can now contain $arch, which will be automatically replaced by the appropriate architecture. This allows us to have one universal mirrorlist file, for both i686 and x86_64, woohoo! Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06Add Architecture and --arch optionXavier Chantry1-0/+1
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-18dload.c : various fixesXavier Chantry1-1/+0
- fix one memleak if get_filename failed - cleanup according to Joerg's feedback: "url_for_string: If fetchParseURL returned successful, you should always have a scheme set. The logic for anonftp should only be needed for very broken server -- do you know of any such? download_internal: Specifying 'p' is now a nop -- it is tried by default first with fall-back to active FTP." Signed-off-by: Xavier Chantry <shiningxc@gmail.com> [Dan: remove from pacman.conf and pacman.conf.5] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-08Fix nonsensical replaceDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-05-11makepkg: several small fixesAllan McRae1-1/+1
1) Do not attempt to strip compressed binaries Original-work-by: Marc - A. Dahlhaus <mad@wol.de> 2) Add "\" in "GPL\'ed" so quote mark does not break source code highlighting 3) Add local to docdir paths in makepkg.conf for consistency 4) Use full path to sed in MacOSX in case users have GNU sed earlier in path Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-28makepkg : remove xdelta supportXavier Chantry1-3/+2
The pkgdelta script can be used instead. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-12makepkg : fix a lot of breakages caused by AllanXavier Chantry1-10/+10
This patch started as a simple typo fix (pugre instead of purge in two places), as well as a fix of a test which was using PURGE_TARGETS instead of $PURGE_TARGETS. It evolved in a slight handling change of the OPTIONS which have a variable affecting their behavior (strip STRIP_DIRS, docs DOC_DIRS, zipman MAN_DIRS and purge PURGE_TARGETS), as well as a clarification in makepkg.conf. Now when a variable is undefined or empty, the corresponding option will have no effect. It looked weird to have a fallback when a option is defined but empty, it seems more natural to not have any fallbacks. Also re-enable docs by default. It seems arbitrary to delete files from packages by default, and it would be more vanilla and distro agnostic to keep them. docs was also the only negated option. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-03makepkg: Add support for specifying LDFLAGSAllan McRae1-0/+1
Provide support for specifying LDFLAGS within makepkg.conf but leaves this undefined by default. Fixes FS#12542. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-03makepkg: move BUILDSCRIPT from makepkg.confAllan McRae1-2/+1
Commit 4b183bf9 moved makepkg.conf sourcing to after the parsing of options, breaking the -p option and --help output. The solution is to move BUILDSCRIPT out of makepkg.conf. This patch moves the definition BUILDSCRIPT back to makepkg itself and adds configure option to allow easy changing of this value during build time. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-03makepkg: Introduce purge optionAllan McRae1-2/+5
The purge option, combined with the PURGE_TARGETS variable, allows makepkg to automatically remove commonly confliting or removed files (e.g. /usr/share/info/dir, *.pod). Original work: Tim Yang Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-03makepkg: provide MAN_DIRS configuration variableAllan McRae1-1/+3
Provides a MAN_DIRS variable in makepkg.conf which can be used to specify folders to look for manual (man and info) pages to be compressed. Useful for packages that install to /opt. Also clarifies that "zipman" means "zip manuals" and covers both man and info pages. Original work by: Tiago Pierezan Camargo <tcamargo at gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Quiet up the make process a bitDan McGee1-3/+4
When we do our sed edits, we really don't need every command printed out to the terminal. Now with "make -s", the output is quite palatable. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25makepkg.conf : some info / docs adjustementsXavier Chantry1-3/+3
After commit 7865fb9af487, info pages are now treated like man pages. This means even with !docs, info pages will still be included. And including info pages was the main reason the docs option was enabled by default recently. So this is now longer needed, and we can revert back to !docs by default for disabling gigantic html pages and other docs. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Remove DB_COMPRESSION and DB_CHECKSUMS from makepkg.confXavier Chantry1-2/+0
DB_COMPRESSION was only used in repo-add and DB_CHECKSUMS was not used anywhere. This also removes the dependency on makepkg.conf in repo-add, so repo-add no longer needs to source makepkg.conf And instead of DB_COMPRESSION, it seems better to just check the extension of the repository file. It does not make sense to have a tar.gz file with a tar.bz2 extension or whatever. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Treat info pages like man pagesAllan McRae1-1/+1
As far a package building is concerned, info pages need to be treated in the same fashion as man pages in that they both can be compressed. This separates them from other forms of documentation and so it makes sense to make that distinction within makepkg. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-13pacman.conf : add curl example for XferCommand.Xavier Chantry1-0/+1
curl is likely to be available on the majority of systems and supports the file:// protocol. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29Put CleanMethod to pacman.conf (commented out)Nagy Gabor1-0/+1
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-20Make strip paths configurableAllan McRae1-0/+2
This patch introduces a new STRIP_DIRS makepkg.conf option to change makepkg's search path when stripping binaries. Original work by: Thomas Bächler <thomas@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-19makepkg.conf: make keeping docs the defaultDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-08Various updates needed prior to a new releaseDan McGee1-0/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-13Remove --builddeps from makepkgDan McGee1-2/+0
This really should be in an external script, as it is not makepkg's job to rebuild your system. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-22Merge branch 'maint'Dan McGee1-0/+14
2008-03-16Add zipman makepkg option.Chantry Xavier1-2/+3
All other steps in tidy_install function were already controlled by an option in makepkg.conf, so this patch adds an option for the man page compression step too. This will allow to keep man pages uncompressed, which is required for some special meta man page, like the zshall one (see FS#4580). Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011472.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-03-10Show options in pacman.conf (commented out)Nagy Gabor1-0/+14
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
2008-03-10makepkg: Support for resuming source downloadsRoman Kyrylych1-5/+5
Download to *.part and remove the suffix if successful, thus md5sums will be checked only for complete files, and next time makepkg will resume downloading of partial file instead of complaining about invalid md5sums. Old DLAGENTS format is still supported. Late fix: Do not try to download %u first The output of grep was not suppressed, thus the output of get_downloadcmd was wrong because of extra line at the beginning that contained an unsubstituted (with %o and %u) entry from DLAGENTS. Signed-off-by: Roman Kyrylych <roman@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-17Remove reference to gnome in DOC_DIRSDan McGee1-1/+1
Arch no longer installs Gnome here, and we should be stripping any doc dirs in /opt anyway, so generalize it. Fixes FS#9597. Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-16 13:36:49 +0000