summaryrefslogtreecommitdiffstats
path: root/doc
AgeCommit message (Collapse)AuthorFilesLines
2012-01-18Don't remove unknown files in cache cleaning codeDan McGee1-1/+1
This removes the hack I added to skip '*.sig' files earlier since there are other files that also fall into the same bucket- source packages from `makepkg --source`, delta files, etc. Rather than prompting for each and every one, simply skip them. Doing '-Scc' rather than '-Sc' will delete these files if that is really what you want to do. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-12doc/vercmp: add note about pkgrel handlingDan McGee1-2/+7
This comes from the Doxygen function documentation. Also, fix two rather silly misspellings. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-02Merge branch 'maint'Dan McGee1-3/+3
Conflicts: doc/Makefile.am
2012-01-02Prevent rebuild of man pages when using release tarballsAllan McRae1-3/+3
Commit 43cad9c8 made the building of all docs depend on the Makefile. However, the Makefile is generated after running ./configure so is always newer than any pregenerated docs. This means that people building from released pacman tarballs are forced to rebuild the docs (and thus have asciidoc installed). That defeats the purpose of prebuilding the documentation. Have the documentatin depends on Makefile.am instead as this is probably what was intended. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-28makepkg: Use SKIP in checksum to skip integrity checkAllan McRae1-3/+4
Using the value of "SKIP" in the checksum array will cause that integrity check to be skipped. This makes building packages that rely on user configurable sources less painful. Based-on-patch-by: Dan McGee <dan@archlinux.org> Based-on-patch-by: David Campbell <davekong@archlinux.us> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-08Use automake verbose helpers in custom make rulesDan McGee1-7/+9
This converts our script generation to use the built-in AM_V_GEN macro, which honors the V= setting passed to make and allows one to see the full command if they truly desire. The AM_V_at macro is also used in place of an explicit @ so verbose-mode compiles show all commands being run. We can also use these two macros in doc generation to quiet it down to the level we expect. Other minor changes: * a pointless test call is removed in test/pacman/tests/ * sed is used instead of dos2unix as we depend on it anyway * consecutive chmod calls are reduced to a single call (e.g., '+x,a-x') Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30Merge branch 'maint'Dan McGee2-2/+3
2011-11-30makepkg.5: fix typo s/tar,bz2/tar.bz2/Dave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30Miscellaneous post-4.0.1 updatesDan McGee1-1/+2
Some late-arriving translation updates and add the correct dates to the index.txt releases table. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20makepkg: add support for PACKAGER environment varPhillip Smith1-0/+4
Add support for overriding configuration in /etc/makepkg.conf and ~/.makepkg.conf by setting the environment variable PACKAGER similar to how SRCDEST and PKGDEST behave. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-11-16Merge branch 'maint'Dan McGee1-1/+1
2011-11-15Update documentation regarding signature extensionsAllan McRae1-1/+1
Commit e7b56f48 allowed makepkg to handle pgp signatures with the .sign extension. Update the man page to reflect this. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-13add fnmatch support for HoldPkgDave Reisner1-1/+2
Adds test remove031. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-13add support for back end fnmatch'd optionsDave Reisner1-4/+7
This is work originally provided by Sascha Kruse on FS#20360 with only minor adjustments to the implementation. It's been expanded to cover: NoUpgrade, NoExtract, IgnorePkg, IgnoreGroup. Adds tests ignore008, sync139, sync502, and sync503. Also satisfies FS#18988. Original-work-by: Sascha Kruse <knopwob@googlemail.com> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-14Merge branch 'maint'Dan McGee4-47/+111
2011-10-14Remove -f short option for --forceDan McGee1-1/+1
This is not something that should be used on a frequent basis, and giving it a short option encourages use without making the drawbacks obvious. For the 1% of situations that require it, the 5 extra keystrokes are a fair price to pay. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13doc/index.txt: Reformat past releases chartDan McGee1-41/+94
This makes it a three-column deal with releases all the way back to 1.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13doc: update .gitignore, add CSS override for new tables usageDan McGee3-6/+17
* Make all docs depend on Makefile; if we change flags here we want them rebuilt. * Add explicit filenames to .gitignore so we can add our own CSS override file, and add an asciidoc-override.css resource. * Adjust a few asciidoc options when generating HTML. * Remove asciidoc-manpage.css; apparantly this doesn't exist anymore. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Document verifying source file signatures in makepkgAllan McRae1-0/+4
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Fix typo in PKGBUILD man pageAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05pacman-key: treat foo-trusted as an ownertrust export fileDan McGee1-2/+4
This allows it to serve double-duty. In order to allow users to base verification decisions off of both a valid signature and a trusted signature, we need to assign some level of owner trust to the keys we designate as trusted on import. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05pacman-key: refine and clarify import/import-trustdb behaviorDan McGee1-4/+5
* --import now only imports keys from pubkey.gpg and does not import owner trust; if you want to have both simply run the operations in sequence. * --import-trustdb has been simplified; it will overwrite existing values in the trust database as before, but there is no need to export it first as those values are safe if left untouched. * Fix the manpage referring to a non-existent option. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Update Doxyfile and fix some documentation errors caught by DoxygenDan McGee1-47/+96
A few parameters were outdated or wrongly named, and a few things were explicitly linked that Doxygen wasn't able to resolve. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: add an additional plain text 'foo-trusted' fileDan McGee1-10/+19
This is similar to the 'foo-revoked' file we had. This will be used to inform the user what keys in the shipped keyring need to be explicitly trusted by the user. A distro such as Arch will likely have 3-4 master keys listed in this trusted file, but an additional 25 developer keys present in the keyring that the user shouldn't have to directly sign. We use this list to prompt the user to sign the keys locally. If the key is already signed locally gpg will print a bit of junk but will continue without pestering the user. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: remove holdkeys functionalityDan McGee1-3/+1
We're putting the cart ahead of the horse a bit here. Given that our keyring is not one where everything is implicitly trusted (ala gpgv), keeping or deleting a key has no bearing on its trusted status, only whether we can actually verify things signed by said key. If we need to address this down the road, we can find a solution that works for the problem at hand rather than trying to solve it now before signing is even widespread. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14buildsys: remove existing symlinks before installingDave Reisner1-0/+1
This fixes build errors when performing a manual install straight to a filesystem where the files already exist. Reported-by: Sergej Pupykin <ml@sergej.pp.ru> Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02pacman-key: add --refresh-keys operationDan McGee1-0/+3
This allows new signatures to be pulled, revocations to be found, etc. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02pacman-key: split keyserver to a separate optionDan McGee1-2/+8
This also renames '--receive' to '-recv-keys' to match the wrapped gpg option name, rather than invent a new one, now that the calling convention is the same. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02pacman-key help and documentation cleanupDan McGee1-13/+13
We were using the mystical [<foobar>] options which is some sort of cross between a <required> argument and an [optional] one. Remove this madness and do some other general cleanup/consistency work in the manpage. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02doc: consistency when referencing other optionsDan McGee3-6/+6
Use '\--option' rather than `--option` everywhere. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02pacman-key: document --lsign-keyDan McGee1-0/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29pacman-key: rework and document holding keys in keyringAllan McRae1-2/+6
The HoldKey option was undocumented and was not suited for pacman.conf. Instead use the file "/etc/pacman.d/gnupg/heldkeys" to contain a list of keys not to be removed from the pacman keyring with the --populate option. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-29pacman-key: Improve documentation for --populateAllan McRae1-4/+15
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-29pacman-key: rework importing distro/repo provided keyringsAllan McRae1-2/+6
The current --reload option, apart from being non-clear in its naming, is very limited in that only one keyring can be provided. A distribution may want to provide multiple keyrings for various subsets of its organisation or custom repo providers may also want to provide a keyring. This patch adds a --populate option that reads keyrings from (by default) /usr/share/pacman/keyrings. A keyring is named foo.gpg, with optional foo-revoked file providing a list of revoked key ids. These files are required to be signed (detached) by a key trusted by pacman-key, in practice probably by the key that signed the package providing these files. The --populate flag either updates the pacman keyring using all keyrings in the directory or individual keyrings can be specified. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-23vercmp: ensure 2.0a and 2.0.a do not compare equalDan McGee2-2/+2
We had this interesting set of facts conundrum, according to vercmp return values: 2.0a < 2.0 2.0 < 2.0.a 2.0a == 2.0.a This introduces a code change that ensures '2.0a < 2.0.a' as would be expected by the first two comparisons. Unfortunately this stays us a bit further from upstream RPM code, but those are the breaks (in RPM, the versions involving 'a' do in fact compare the same, but they are both greater than the bare '2.0'). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22Fix formatting in pacman-key manpageJakob Gruber1-2/+2
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-18doc/PKGBUILD: update regarding versioned package fieldsDan McGee1-9/+12
Add the info that versioned replaces are now supported, as well as beefing up some of the other places touching on versioned fields. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-18Add makepkg -S which is an alias to makepkg --sourceSebastien Luttringer1-7/+7
makepkg --source is a often used go make source package like for AUR. Have a -S shortcut will save the world. Signed-off-by: Sebastien Luttringer <seblu@seblu.net> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-17Update PKGBUILD manpage about startdir deprecationSebastien Luttringer1-0/+1
Signed-off-by: Sebastien Luttringer <seblu@seblu.net> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-16doc/PKGBUILD: fix Asciidoc formatting issuesDan McGee1-6/+6
We had this gem: ⇐ (less than or equal to) Due to not ensuring we did literal printing of things like this. Fix it and a few other problems noticed scanning through both the HTML and manpage generated files. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-16Update authors and contributorsDan McGee1-3/+6
* .mailmap: add mapping for Dave's two email addresses. * AUTHORS: clear out file, tell people to use `git shortlog -s` instead. * doc/footer.txt: "promote" Dave, put Xavier and Nagy in past contributors. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15build-sys: always use $(RM) instead of rm -fDave Reisner1-1/+1
These are equivalent. Use the autoconf macro for consistency. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15dist: preserve symlinks on installationDave Reisner1-1/+10
This applies to the repo-remove man page as well as the script itself. Yes Dan, I ran distcheck afterwards. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11Merge branch 'maint'Dan McGee1-0/+2
Conflicts: scripts/repo-add.sh.in
2011-08-11pacman: remove --dbonly shortoptDave Reisner1-1/+1
This is somewhat of a dangerous option with limited use cases. Don't advertise it as an easily accessibly option. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11Allow --needed and --recursive on -U operationsDan McGee1-1/+12
Trivial to implement as the same backend machinery is used anyway. Document it and add it to the accepted options. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11Add -S --recursive operationDan McGee1-0/+7
This closely matches what we had before for -R --recursive. Basically, when specifying a target (e.g., pacman), we can now recursively pull all dependencies, regardless of version specifiers and whether they are already satisfied in the local database. This could be used to update pacman on a system with an old glibc, for example, as both pacman and glibc would get pulled into the transaction. This is most useful with --needed to prevent needless reinstalls as described in the man page changes. The end goal of this change is to wire it into SyncFirst and have it be the default mode of operation there, but that belongs in a separate changeset. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-093.5.4 release preparationDan McGee1-0/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-09Document group and providers selectionAllan McRae1-4/+8
The format required for selection of packages within the group selection dialog is not entirely obvious, so provide some documentation. Fixes FS#24134. Signed-off-by: Allan McRae <allan@archlinux.org> (cherry picked from commit 94d22f93096e210cd00d2e9c97c65f77d49ae387)
2011-08-09doc/pacman.conf: make SigLevel overview an unordered listDan McGee1-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>