summaryrefslogtreecommitdiffstats
path: root/contrib
AgeCommit message (Collapse)AuthorFilesLines
2011-03-16contrib/Makefile.am: don't simplify what you don't understandDan McGee1-7/+17
This was totally screwed under a 'make distcheck' invocation. Bring it inline with what we have (and what works!) in scripts/Makefile.am. This was broken/introduced in commit 05f0a28932. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-24pkgsearch: handle non-matching lines gracefullyDan McGee1-3/+9
Before any non-matching line would trigger some perl warnings about undefined variables. If a line doesn't match, just show it to the user unprocessed; this is seen with warning and error messages pacman not so helpfully emits on stdout rather than stderr. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-24Update contrib/ MakefileDan McGee2-1/+10
We didn't have the proper dependencies specified for our scripts after the move to *.in extensions, so a change to a file didn't trigger a rebuild. Also remove old stuff from .gitignore. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21Remove epoch as an independent fieldDan McGee1-6/+0
Instead, go the same route we have always taken with version-release in libalpm and treat it all as one piece of information. Makepkg is the only script that knows about epoch as a distinct value; from there on out we will parse out the components as necessary. This makes the code a lot simpler as far as epoch handling goes. The downside here is that we are tossing some compatibility to the wind; packages using force will have to be rebuilt with an incremented epoch to keep their special status. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29makepkg: add option to clear buildflagsAllan McRae1-1/+1
Add the "buildflags" option, which is useful in its negative form for disabling CFLAGS, CXXFLAGS and LDFLAGS when building a package. This is useful when determining of one of these flags is causing an issue with a package. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12contrib: remove bash pactreeXavier Chantry3-327/+0
This has been rewitten in C which is much much faster. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-12Merge branch 'maint'Dan McGee1-3/+6
Conflicts: lib/libalpm/be_local.c lib/libalpm/trans.c
2010-10-28PKGBUILD.vim: add special licenses BSD MIT ZLIB PythonXavier Chantry1-3/+6
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-14bash_completion: remove upstream deprecated functionsCarlos Diaz1-4/+2
Populate $cur and $prev with the new bash-completion 1.2 function, _get_comp_words_by_ref. _get_cword and _get_pword have been deprecated. Signed-off-by: Carlos Diaz <839273@gmail.com>
2010-10-13Update contrib/ for epochDan McGee2-2/+11
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-13Fix bash shell location checkDan McGee6-6/+6
BASH is defined when you are actually using bash during configure, which sucks because it ends up being '/bin/sh', messing up all of our scripts. Change the name of the variable we use in configure, and also ensure we get a full path to the executable by using AC_PATH_PROGS rather than AC_CHECK_PROGS. Finally, change the variable name everywhere we use it. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-12contrib/ follow-up workDan McGee4-5/+13
* Add a .gitignore file * Use the same 'GEN' output we have in the scripts/ Makefile when doing our edits on the .in files * Remove PKGBUILD.vim and vimprojects from our edit list, they have no need to be in the list Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-11Use sysconfdir, localstatedir, BASH instead of hardcoded valuesNezmer7-34/+63
This applies to contrib/ files, our scripts, and the documentation. Dan: fix 'make clean' in contrib/ directory. Signed-off-by: Nezmer <git@nezmer.info> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-11Add .in extension to files in contribNezmer11-0/+0
This is needed If we want to use sysconfdir,localstatedir and other variables. Signed-off-by: Nezmer <git@nezmer.info> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-11Remove use of `seq` in pactreeDan McGee1-1/+2
This is not a bash builtin, so can potentially cause portability issues. Additionally, the use of it is completely unnecessary as it can all be done within bash (and done faster). $ time pactree xfwm4 >/dev/null (old version) real 0m3.245s $ time ./contrib/pactree xfwm4 >/dev/null (new version) real 0m3.042s Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-15bacman: unify package creation with makepkgAllan McRae1-9/+35
Currently bacman always compresses with gzip now matter what PKGEXT is set to. Rework the entire package creation process to be similar to that in makepkg. This also make the explicit assumption that PKGEXT is defined in makepkg.conf. Thanks to Nelson Chan <khcha.n.el@gmail.com> for the original patch to fix the incorrect package compression. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-27bash_completion: negate expression inside bracketsDave Reisner1-2/+2
Avoids letting the shell evaluate ! as something else (e.g. an alias). Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-23bash_completion: fix bash 3.2 incompatibilityAndres P1-5/+12
To avoid errors with bash 3.2, compopt will be skipped if it's not a shell builtin. compopt is needed to not append slashes to package names that coincide with directories in PWD. This is currently not possible to fix in bash versions that do not support compopt, so these users will have to bear that regression. Signed-off-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-06-03contrib: kill gensync/updatesyncDan McGee4-277/+0
These are old and have outlived their usefulness at this point. Kill them. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-27Update pacsearch to work with new Qs/Ss outputDan McGee1-23/+21
Now that we have the '[installed]' text, update pacsearch to look for it and highlight it instead of the former '***' prefix. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-24bash_completion : full rewrite with many improvementsAndres P1-348/+86
* Undeclared local vars with common enough names to warrant breakage * Performance issues with _pacman trying to replicate /usr/bin/pacman with find and other slow tools. * Performance issues with expanding an array (with sometimes hundreds of items) over three times. * Expanding said array to remove already completed entries had the side effect of braking filenames with spaces and or \n. * add -D --database options and --print * fix dirs showing up when they shouldn't in completions * completions regarding database entries shouldn't trigger filename completion. This is now down to 106 lines. The original one (master) is 365 lines long, yet this one retains all functionality. The work is documented in FS#16630. Signed-off-by: Andres P <stderr@mail.com> Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-13PKGBUILD.vim: only allow hex characters in checksumsDan McGee1-4/+4
Of course, we still have only md5 and sha1 hardcoded here but I resisted the urge to copy paste for the rest of our supported checksums in hope that someone knows how to do it a better way. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-13Add 'pkgbase' highlighting to vim syntax fileDan McGee1-1/+10
Simple change and probably a bit too copy/paste, but works for now. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-13PKGBUILD.vim : update valid licensesXavier Chantry1-1/+1
Updated list with : echo $(pacman -Ql licenses | grep "/usr/share/licenses/common/.*/$" | cut -d'/' -f6 ) Maybe PKGBUILD.vim could do this at runtime ? Dan: you forgot the symlinks; readded FDL, GPL, LGPL. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-04-26contrib/pactree: generate reverse dependency treesChristophe Chapuis1-5/+26
Add an option to show the tree of packages which depend on a given package Signed-off-by: Allan McRae <allan@archlinux.org>
2010-03-14Add new --print operation for all operationsXavier Chantry2-2/+8
And a new --print-format option to configure the output. This implements FS#14208 Example usage : pacman -Sp --print-format "%r/%n-%v : %l [%s]" kdelibs extra/kdelibs-4.3.2-4 : ftp://mir2.archlinuxfr.org/archlinux/extra/os/i686/kdelibs-4.3.2-4-i686.pkg.tar.gz [0,00] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-02-28bash_completion: remove absolute utility paths againCedric Staniewski1-14/+14
The location of the used utilities may and does differ between various distributions and therefore absolute paths do not work well. Since the main purpose of its introduction was to avoid side-effects caused by aliases, it is sufficient to disable possible aliases temporarily by preceding the commands with a backslash. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-02-28contrib/*_completion: match *.pkg.tar.*Pierre Schmitz2-6/+6
Signed-off-by: Pierre Schmitz <pierre@archlinux.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-30bash_completion: use absolute paths to utilitiesDan McGee1-14/+14
Fixes issues noted in FS#16630. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15contrib/bacman: fix checking if file has been addedAllan McRae1-2/+2
Fixes FS#17140. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24pacdiff : add diffsearchpath optionHeiko Baums1-2/+6
Xav: added doc Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11Introduce new PKGBUILD variable `changelog`Cedric Staniewski1-0/+9
Currently, a changelog is added to a package if a specific file with a hardcoded name exists in the PKGBUILD's directory. This approach is not pretty and also inconsistent with the handling of install files, but it works. With the introduction of split PKGBUILDs, however, a drawback in this old behavior has arisen: you only have the possibility to include one specific changelog file in either every package defined in the PKGBUILD or in none. The use of an additional variable, `changelog`, works around this issue and makes it possible to include a changelog in only some of the packages, and besides, each package of the PKGBUILD can have its own changelog file. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-07Update doc and vim syntax for arch=anyXavier Chantry1-1/+1
This fixes FS#15870 Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-22New feature: files verificationDan McGee2-0/+3
This implements FS#13877. Add a new option "-Qk" which checks if all of the files for a given package (or packages) are really on the system (i.e. not accidentally deleted). This can be combined with filters and other display options. It also respects both the --quiet and --verbose flags to give varying levels of output. Based on the original patch by Charly Coste <changaco@laposte.net>, thanks for your work! Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-01Update copyright headers and messagesDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-03-15contrib/pacscripts - print install scripts from a packageAllan McRae3-0/+136
Prints the install script from a given package file or from a package in the pacman repo. Original-work-by: Giulio "giulivo" Fidente <giulivo.navigante@gmail.com> Improvements-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-18contrib/pacdiff : rework and cleanupXavier Chantry1-27/+58
I initially only wanted to add a -l/--locate option to use locate instead of find, which should have been easy. Then I thought I would try to support filename with whitespace while I was at it, and this was a bit more complex. The safest ways seem to be the following ones : http://mywiki.wooledge.org/BashFAQ/020 Then I received a lot of suggestions on #bash about how to improve the script, which I tried to address. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> [Dan: fix grouping of find arguments] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-12-07contrib/pactree: fix option parsingAllan McRae1-2/+1
The option parsing was catching any "-d" in an argument so packages with this in their name did not work. Also removed commented code line that appears to be inserted during testing. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-24pacsearch: quote args passed to pacmanDan McGee1-2/+2
Something such as "pacsearch foo|bar" would cause problems due to the quoting being dropped. Adding quotes solves the problem. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-24contrib: add pactree scriptCarlo Bersani3-0/+305
Pactree is a dependency tree viewer for installed packages. It features both textual and graphic (through graphviz) output. Script by: Carlo Bersani <carlocci@gmail.com> [Allan: removed whitespace errors] Signed-off-by: Allan McRae <allan@archlinux.org> [Dan: killed some unnecessary lines, moved license header] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-01Use $PKGEXT (from /etc/makepkg.conf) in bacmanNagy Gabor1-1/+2
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-22bacman: fix issue with symlink early copyCarlo Bersani1-9/+10
test -e tries to resolve the link before testing, so if the link is copied before the actual file, the script exited. This fixes the issue. [Dan: also add some improved quoting in the script] Signed-off-by: Carlo Bersani <carlocci@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-06bacman - regenerate package from systemAllan McRae4-79/+284
Original work by Carlo "carlocci" Bersani with additions by Xavier Chantry and Allan McRae This script rebuilds an already installed package using metadata stored into the pacman database and system files. Replaces the outdated re-pacman script Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-10contrib/paclist: list packages installed from given repo.Chantry Xavier3-0/+93
The paclist script provides a simple method for monitoring which packages are installed from a given repo. This is particularly useful when using a testing or unstable repository. Thanks to Allan McRae for the idea and an initial bash script. As suggested by Dan, I tried to rewrite in perl, and this resulted in much better performance. Then Dan further cleaned up the script. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> [Dan: add to Makefile & README, minor script cleanups] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-10pacsearch: rewrite in perlDan McGee1-60/+103
This rewrite in perl blows the socks off the old shell script version for large searches: $ time ./pacsearch.perl ^.*$ >/dev/null real    0m0.836s user    0m0.593s sys     0m0.217s $ time pacsearch.sh ^.*$ >/dev/null real    1m53.818s user    1m16.818s sys     0m33.694s Functionality and output is identical to the old version with the exception of the old version's missing EOL after all the output. It should be a lot easier to add new things like the --color flag that has been a TODO at the top of the script for a long time. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-07Merge branch 'maint'Dan McGee1-1/+1
2008-04-06Quote filenames in find expression in pacdiffAllan McRae1-1/+1
From 41cc28f560bf9843d81ce5fb62b884b6325d06a0 Mon Sep 17 00:00:00 2001 From: Allan McRae <mcrae_allan@hotmail.com> Date: Sun, 6 Apr 2008 22:18:06 +1000 Subject: [PATCH] Quote filenames in find expression in pacdiff Small patch to allow pacdiff to run in /etc. See FS#10090. Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-01Merge branch 'maint'Dan McGee1-1/+1
Conflicts: configure.ac contrib/Makefile.am
2008-04-01Update NEWS and configure.ac for 3.1.4 releaseDan McGee1-1/+1
Also fix a broken contrib/ Makefile, found with make distcheck. I also let the little translation linebreak update slip in here as it was small enough not to be a big deal, and this should just prevent it from happening again later anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-22Kill the dependsonly option.Chantry Xavier2-2/+0
From the man page : "This is pretty useless and we're not sure why it even exists." Signed-off-by: Chantry Xavier <shiningxc@gmail.com>