summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2010-09-23Update build system (automake, autoconf, libtool)Dan McGee19-8528/+17111
Unfortunately this patch is hard to split up into smaller chunks. Our build system and the associated automake/autoconf/libtool macros has been left untouched for a while, and could use a refresher. * Upgrade ltmain.sh to the latest version * Move away from a huge acinclude.m4 directory to using individual files in the m4/ subdirectory, suggested by upstream automake documentation * Update all macros to their latest available version * Adjust Makefile.am and autogen.sh to accommodate m4/ subdirectory Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-23Update more supplementary build scriptsDan McGee4-167/+240
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-23Update config.guess and config.subDan McGee2-177/+237
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-23Clean up root .gitignoreDan McGee1-18/+9
We had a few files listed in here that we have checked in to our repo, which doesn't make a whole lot of sense. Also alphabetize the list while we are at it. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-23Update gettext Makefiles to 0.18Dan McGee2-78/+256
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-15Merge branch 'maint'Dan McGee12-275/+272
2010-09-15Update Portuguese translationGaspar Santos1-129/+149
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-15PKGBUILD-example.txt: Remove superfluous "|| return 1".Lukas Fleischer1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-15Update Kazakh translationBaurzhan Muftakhidinov2-93/+96
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-07Remove quotes in remaining bash regexesDan McGee1-1/+1
After a8dcfeccfc, Allan noted that one more regular exprssion inside makepkg also contained quotes; these should not be there for the same reason as that commit. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-07Restore trimming of db and pkg extensionsDan McGee1-1/+1
These keep having to change because we are getting really good at changing the downloaded filename. Shorten the match sequences to just .db and .pkg and trim everything after and including these strings. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-06Fix libfetch configure checkingDan McGee4-9/+9
I don't know what I tested in commit 3e7b90ff6950, but it definitely wasn't working as advertised. Fix the checks in the source code itself to match the right define (HAVE_LIBFETCH), as well as make sure the configure check defaults to looking for the library but not bailing if it could not be found. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-03Minor translation file updates after `make distcheck`Dan McGee8-62/+32
It touched up these a bit after it ran, so might as well check the changes in so we don't have to deal with them again later. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-03Retroactive additions to 3.4.1 changesDan McGee1-1/+5
Forgot to mention things involving the translation changes we had. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-03Merge branch 'maint'Dan McGee3-19/+18
2010-09-03libalpm Swedish translation updateTobias Eriksson1-12/+12
Signed-off by: Tobias Eriksson <tobier@tobier.se> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02Clean up libfetch checking in configureDan McGee4-26/+24
Model it after the new OpenSSL check, and have it be a bit more useful. If you do not explicitly pass a command line option, it will be linked if available but will not error out if it is missing. Also bump the version to that where connection caching was introduced as we use these new features in the codebase. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02Use OpenSSL MD5 crypto functions if availableDan McGee3-3/+66
I've noticed my Atom-powered laptop is dog-slow when doing integrity checks on packages, and it turns out our MD5 implementation isn't near as good as that provided by OpenSSL. Using their routines instead provided anywhere from a 1.4x up to a 1.8x performance benefit over our built-in MD5 function. This does not remove the MD5 code from our codebase, but it does enable linking against OpenSSL to get their much faster implementation if it is available on whatever platform you are using. At configure-time, we will default to using it if it is available, but this can be easily changed by using the `--with-openssl` or `--without-openssl` arguments to configure. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02libalpm md5: use larger and dynamic bufferDan McGee1-2/+11
This gave at least a 10% improvement on a few tested platforms due to the reduced number of read calls from files when computing the md5sum. It really is just a precursor to another patch to come which is to use MD5 functions that do the job a lot better than anything we can do. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02German translation updatesMatthias Gorissen1-4/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-01Small fixes to Kazakh translationBaurzhan Muftakhidinov1-3/+3
2010-09-01Merge branch 'maint'Dan McGee6-3/+2657
2010-09-013.4.1 version bumpDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-01Add new European Portuguese translationGaspar Santos4-0/+2654
This is being checked in as 'pt' rather than 'pt_PT' as that is what Transifex seems to want, and it is also the dominant choice of packages already installed on my system when doing a count of the files located in the /usr/share/locale translation directories. Thanks for the new translation! Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-01Add dir missing from autoclean.shDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27Use pipe to create compressed package instead of an intermediate tar fileJürgen Hötzel1-13/+12
A pipe between tar and compression command is used. This improves performance by running tar and the compression command simultaneously. Using a pipe also reduces IO by not writing an intermediate tar file to disk. Signed-off-by: Juergen Hoetzel <juergen@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27use execv to avoid using sh just to run ldconfigJonathan Conder3-7/+11
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27redirect scriptlet stderr synchronously through alpmJonathan Conder1-36/+55
Fixes FS#18770, and hopefully an occasional deadlock in my frontend as well. For simplicity it redirects all scriptlet output through SCRIPTLET_INFO, and all callbacks in the child process have been replaced for thread-safety. Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27Merge branch 'maint'Dan McGee2-2/+5
2010-08-27makepkg: remove trailing quote mark in regexDan McGee1-1/+1
Regular expressions in bash should not be quoted. Glad this was in the documentation and I didn't have to go to #bash to ask... Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27pactest: add shell to fake root environmentJonathan Conder1-1/+4
Adds a shell to the fake root set up for pactests, which was not needed previously due to a bug (debian #582847) in fakechroot. Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org>
2010-08-25Update Chinese translation甘露(Gan Lu)1-1/+1
Submitted through Transifex on 2010-07-02. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23Merge branch 'maint'Dan McGee29-410/+2441
2010-08-23makepkg: error out on empty optdepends entriesAllan McRae1-1/+1
If optdepends was defined with empty members, then makepkg would abort late in the package building process. Detect such cases in the check_sanity() function. Fix-provided-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23makepkg: use less local variables in check_sanityAllan McRae1-26/+20
Instead of declaring a new local variable for each loop in the check_sanity() function, just reuse $i. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: remove unnecessary variable presence checkAllan McRae1-8/+6
It is unnecessary to check for a variables existence before looping over it. Extracted from patch supplied by Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: clarify invalid backup entry errorsAllan McRae1-2/+2
"Invalid backup entry" was not a particular helpful error message, especially when it was due to the file not being in the final package. Clarify these two messages. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23PKGBUILD.5: document illegal variable contentsAndres P1-4/+8
Signed-off-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: less code duplication in create_packageAndres P1-15/+12
Combine changelog and install file creation in create_package(). Signed-off-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: use regex to match options for privilege escalationAllan McRae1-1/+1
Eases maintanence if we need to add further options in the future. Extracted from a patch supplied by Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23Fix some whitespace issuesAllan McRae4-6/+6
The combination of tabs and spaces is annoying in any editor that does not use a tab width of 2 spaces. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23fgets invocation cleanupDan McGee3-34/+33
From the fgets manpage: fgets() reads in at most one less than size characters from stream and stores them into the buffer pointed to by s. Reading stops after an EOF or a newline. If a newline is read, it is stored into the buffer. A '\0' is stored after the last character in the buffer. This means there is no need at all to do 'size - 1' math. Remove all of that and just use sizeof() for simplicity on the buffer we plan on reading into. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23Update translation files for 3.4.1 freezeDan McGee21-219/+56
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23Update NEWS for 3.4.1 releaseDan McGee1-0/+10
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23Add Slovak translationJozef Riha4-0/+2266
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23Enable libfetch connection cachingDan McGee1-0/+13
This will allow downloads to reuse connections if possible, which could make big differences on perceived FTP speed as the connection won't have to be reestablished each time. For the most part, HTTP requests wouldn't be using keep alive anyway so this won't have an effect there. I'm not enthused about having to do this with the library initialization, but there isn't a much better place due to the fact that the loop over databases occurs on the frontend and not the backend. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-18repo-add: create relative DB symlinksDan McGee1-2/+3
As noted in FS#20498, if an absolute path is used for specifying the database when invoking repo-add, the symlink generated will point to the absolute path instead of being relative to the directory. Fix this for the two linking cases, but leave the copy untouched so that will still work. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-18makepkg: add file to the list of needed utilitiesAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-18Updates for Polish translationsMateusz Herych2-184/+87
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-18makepkg: check tput support before usingAllan McRae1-6/+16
Prevent makepkg aborting whe colors are enabled and the terminal does not support setting colors by tput. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-22 20:22:59 +0000