summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-02-13Use AM_PATH_GPGME macro from gpgme instead of home-built gpgme detection.Nathan Phillip Brink1-11/+40
Fixes compilation on Gentoo, where CPPFLAGS=-I/usr/include/gpgme is necessary. The AC_SYS_LARGEFILE macro call has to be before the GPGME checks, otherwise the GPGME header gives an error about ABI incompatibilities. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Add gpgme m4 autoconf macro fileAllan McRae1-0/+307
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Do not check for ALPM_ERR_PKG_INVALID_ARCH on remove operationAllan McRae1-6/+0
alpm_trans_prepare can not return ALPM_ERR_PKG_INVALID_ARCH on a remove operation so there is no point in checking for it. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13testpkg: set gpgdirAllan McRae2-0/+5
Without setting gpgdir, testpkg outputs: warning: Public keyring not found; have you run 'pacman-key --init'? Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Reset errno before opening archiveAllan McRae1-0/+1
Set errno to 0 at the start of _alpm_open_archive as it is not set when archive_read_open_fd fails. This can result in _alpm_pkg_load_internal thinking errno == ENOENT and setting the wrong pm_errno. e.g. Before: > testpkg pacman-4.0.1-4-i686.pkg.tar.gz.sig error: could not open file pacman-4.0.1-4-i686.pkg.tar.gz.sig: Unrecognized archive format Cannot find the given file. After: > testpkg pacman-4.0.1-4-i686.pkg.tar.gz.sig error: could not open file pacman-4.0.1-4-i686.pkg.tar.gz.sig: Unrecognized archive format Cannot open the given file. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Move ROOTDIR definition into config.hAllan McRae3-2/+1
This was the only variable of its kind when a define was done on the compiler command line. Move it into config.h instead. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Allow specifying shell for running scriptletsAllan McRae2-1/+10
Some distributions insist on using bash specific commands in their install scripts under the assumption that "sh" is a symlink to bash. This can causes issues if (e.g.) their users what to change sh to point at another shell, such as dash, that does not support these features. Add a configure option to explicitly set the shell being used to run install scripts. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13use _alpm_access in a few more places for increased debugging infoFlorian Pritz3-3/+3
pacman -U <pkg> returns a bogus "could not find or read package" if the file is on a fuse file system that doesn't allow root access. Debug output isn't very helpful here either so we should log why the access check failed. The other 2 checks already log something when failing so logging a more specific error won't hurt either. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13lib/sync: use full delta size as max download sizeDave Reisner1-1/+1
The max filesize for a delta download must be the full size of the delta file, not just what's remaining. Fixes FS#28345 Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-114.0.2 release updatesDan McGee3-2/+28
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11Final pre-release Transifex updatesDan McGee5-130/+182
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11pactree: allow comments after repo section headerAllan McRae1-6/+6
Duplicate the fix in config file parsing from d95c0494. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11makepkg: disable extglob when sourcing BUILDSCRIPTAllan McRae1-0/+4
PKGBUILDs are advertised as being pure bash so it would be expected that the default bash options are in effect when sourcing it. This inadvertantly "fixes" FS#27780 where enabling extglob causes the bash parser to error on non-valid bash function names like package_libxml++(). Note that these function names are unsupported in bash and could break again even with this "fix" in future bash releases. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11makepkg: deal with mercurial exit codesAllan McRae1-2/+7
From mercurial-2.1, "hg pull" returns 1 when there are no updates. Catch the return code and either pull the update or return an error as appropriate. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Fix a handful of comment typos or misspellingsDan McGee3-8/+10
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Translation updates from Transifex, mostly scriptsDan McGee30-1400/+933
This is after some manual massaging to fix issues with newlines in some translations of the script catalogs. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Merge branch 'maint'Dan McGee40-228/+265
Conflicts: lib/libalpm/alpm_list.c
2012-02-06makepkg.sh.in - if both -r and -i are provided, only remove makedepsAndrew Gregory1-1/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06ALPM API adjustments for sanity and consistencyDan McGee16-94/+93
This makes several small adjustments to our exposed method names, and in one case, parameters. The justification here is to make methods less odd in their naming convention. If a method takes an alpm_db_t argument, the method should be named 'alpm_db_*', but perhaps more importantly, if it doesn't take a database as the first parameter, it should not. Summary of changes: alpm_db_register_sync -> alpm_register_syncdb alpm_db_unregister_all -> alpm_unregister_all_syncdbs alpm_option_get_localdb -> aplpm_get_localdb alpm_option_get_syncdbs -> aplpm_get_syncdbs alpm_db_readgroup -> alpm_db_get_group alpm_db_set_pkgreason -> alpm_pkg_set_reason All methods keep the same argument list except for alpm_pkg_set_reason; there we drop the 'handle' argument as it can be retrieved from the passed in package object. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06alpm.h: enum cleanups, comment formatting cleanupDan McGee1-27/+23
Don't use trailing commas in enums if people really want to use a strict C89 compiler, and document why on earth one particular enum uses bitmask values when it doesn't seem necessary. With comments, shoot for more consistency. When something is a one-liner, keep it that way and move the whole /** sequence */ to one line. When it needs more than one line, ensure we format most of them in a similar fashion. Two minor function signature adjustments are made that don't change anything other than matching the parameter name (name -> filename) and fitting in with our coding style (type* var -> type *var). Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Remove last explicit include of config.hDan McGee1-2/+0
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Update translations from TransifexDan McGee29-210/+211
The pacman-scripts catalog is omitted here due to various newline errors I don't have the time to fix right now. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06remove.c: make "target not found" error consistent with sync.cAndrew Gregory1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06makepkg.sh.in - fix remove_deps test for deps to be removedAndrew Gregory1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06makepkg: add forgotten newline in help outputMantas Mikulėnas1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-03pactest: check return code in some upgrade testsDan McGee4-0/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-03Add simple integer-only pow() implementationDan McGee1-2/+13
We hardly need the complexity (or slowness) provided by the libm power function; add a super-cheap one that suits our needs and is specialized for the values we plan on passing in. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-03Fix FS#27924: don't display negative zeroesThomas Dziedzic4-13/+22
Dan: don't compute lower bound unless needed, flip argument order so out values are last, add param Doxygen documentation. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-31makepkg: Fix non-writable SRCPKGDEST error messageAllan McRae1-0/+5
Provide a helpful error message for when creating a source tarball and SRCPKGDEST is not writable. Fixes FS#28197. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-31Fix rare segfault on package removalAllan McRae1-1/+4
Very rarely a segfault would occur when removing a number of packages due to a corrupted list for the local database (FS#27805, FS#28195). This was caused by the alpm_list_msort function not correctly dealing with the two new head node's prev values. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Merge branch 'maint'Dan McGee64-938/+2509
Conflicts: scripts/makepkg.sh.in
2012-01-30pacman-key: call gpg fewer times for revocation keysDave Reisner1-6/+5
Instead of iterating over the revocation keyfile and calling gpg once for each key, map the file into an array and call gpg once, iterating over this output to mark each key as revoked. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30pacman-key: simplify trusted keyring iterationDave Reisner1-8/+6
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Update translationsDan McGee55-817/+2347
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Update pot translation catalogsDan McGee2-19/+59
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Make a few more copyright date tweaksDan McGee3-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30scripts: always use printf with embedded gettextDave Reisner6-96/+96
This addresses two problems: 1) echo's behavior is inconsistent when dealing with flags, and can potentially be problematic. $ echo -n $ echo -- -n -- -n 2) Always using the end of options markers prevents translated strings from throwing errors, as shown in FS#28069. The remaining "inconsistencies" are because printf is being used in a guaranteed safe manner, e.g. printf '%s\n' "$(gettext "--this can never break")" Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30makepkg: workaround for zipman issuesAllan McRae1-1/+2
This "fixes" two issues: 1) MAN_DIRS contains a glob by default so should not be quoted. It is not quoted anywhere else so this should not cause breakage... 2) the find statement returns 1 when some of MAN_DIRS are missing. This appears to only be exposed when running makepkg as root (which it appears some wrappers do...). Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23makepkg: check for license when creating srcpackageDave Reisner1-0/+2
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-01-23makepkg: abstract license check into separate functionDave Reisner1-6/+10
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-01-23Remove rmrf implementation from backendDan McGee3-52/+36
This moves the code for removal of local database entries right into be_local.c, which was the last user of the rmrf() function we had in our utility source file. We can simplify the implementation and make it non-recursive as we know the structure of the local database entries. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23libalpm/deps.c: access trans flags directlyDan McGee1-2/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23Merge branch 'maint'Dan McGee17-145/+390
Conflicts: lib/libalpm/diskspace.c src/pacman/util.h
2012-01-23lib/dload: give uniform naming to curl CB functionsDave Reisner1-4/+4
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23Fix sys/mnttab.h header includeDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23lib/dload: enforce usage of TCP keepalivesDave Reisner2-1/+55
This is particularly important in the case of FTP control connections, which may be closed by rogue NAT/firewall devices detecting idle connections on larger transfers which may take 5-10+ minutes. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23makepkg: restrict usage of flags passed to pacmanAllan McRae1-1/+5
With pacman-4.0, using --noconfirm or --noprogressbar with -Q or -T results in pacman reporting an "invalid option" error. Restrict the passing of these options to pacman. Fixes FS#28012. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23makepkg: fix error on unnecessary -rAllan McRae1-3/+4
The grep statement used to check for a difference between the installed package list before and after resolving dependencies returns 1 if there is no difference. This sets of the error trap when "-r" is used "unnecessarily". Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-19contrib/bash_completion: don't print stderr messagesDan McGee2-3/+3
If you are a crazy developer like me and have bogus options in your pacman.conf file, the tab completion gets messed up by the output on stderr. Suppress it. Fix the same basic issue in zsh_completion, thanks to the work by Florian Pritz <bluewind@xinu.at>. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-19Add diskspace checking support for Solaris/IllumosDan McGee2-6/+51
Was able to get my hands on one of these boxes today, so add yet another new way of doing this. I'm glad these calls are so standardized. This was compile tested on Linux and Illumos and seems to still be working in both places. Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-19 00:45:19 +0000