summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-02-20makepkg: rework libprovidesAllan McRae1-39/+50
This reworks the implmentation of libprovides for the following benefits: - Moves functionality from write_pkginfo() to find_libprovides() - Only calculates the version for libraries specifically requested and not all libraries. This has the disadvantage of running find over the $pkgdir for as many libraries as needed, but is unlikely to be an issue due to caching. - The order of the provides array in the PKGBUILD is kept in the package - There are more warning messages when things fail and those that were there are no longer errors (as I do not think failure of libprovides should result in complete packaging failure) - It is now modular so can be easy extended to other library types other than ELF *.so. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-20util: reduce pointer hell in _alpm_makepath_modeDave Reisner1-25/+30
Simplify the implementation: - allocate and manipulate a copy of the passed in path rather than building out a path as the while loop progresses - use simple pointer arithmetic to skip uninteresting cases - use mkdir(3)'s return value and errno to detect failure Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-20Print error message when to-be-downloaded file cannot be createdNagy Gabor1-0/+4
It can happen that the to-be-downloaded file cannot be created in cachedir. For example, I am an -Sup user, and it is comfortable to set --cachedir to /mnt/pendrive, which is a FAT filesystem, so files like capseo-1:0.3-2-i686.pkg.tar.xz cannot be downloaded to there. Before this patch, pacman didn't give clear output about what happens when the download code could not create the necessary file. This can be confusing with -Su. An example output: *** $ sudo pacman -S capseo bochs --cachedir /c/TEMP resolving dependencies... looking for inter-conflicts... Targets (2): bochs-2.4.6-1 capseo-1:0.3-2 Total Download Size: 0.61 MiB Total Installed Size: 2.61 MiB Proceed with installation? [Y/n] :: Retrieving packages from extra... warning: failed to retrieve some files from extra bochs-2.4.6-1-i686 611.5 KiB 118K/s 00:05 [------------------] 97% error: failed to commit transaction (unexpected error) Errors occurred, no packages were upgraded. *** After the patch, pacman will give more informative error message (and pm_errno is set properly): *** error: could not open file '/c/TEMP/capseo-1:0.3-2-i686.pkg.tar.xz.part': Invalid argument error: failed to commit transaction (failed to retrieve some files) *** Unfortunately, the "could not open file" error message is printed for every mirror (that can be dozens of lines), which is ugly, but at least informative... Without modifying the download logic (for example, by introducing -2 return value for _alpm_download() to indicate giving up), this ugliness cannot be eliminated. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-20Don't check diskspace when using --dbonlyDan McGee1-1/+1
Mostly a waste of time. Sure, we no longer make sure your pacman database partition has enough space, but if you are using this option you better know what you are doing anyway. Signed-off-by: Dan McGee <dan@archlinux.org> (cherry picked from commit ee969006056c86e88d5f179a7575d64f23d5b252)
2012-02-19Give better error messages on database locking failuresDan McGee1-3/+7
This was noted when trying to perform an operation on a pacman database on a read-only file system. Print the actual underlying errno string, and only show the "you can remove" message if the lock file actually exists. Before: $ pacman -Su error: failed to init transaction (unable to lock database) if you're sure a package manager is not already running, you can remove /e/db.lck After: $ pacman -Su error: failed to init transaction (unable to lock database) error: could not lock database: Read-only file system Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-19diskspace: ensure we match only full path componentsDan McGee1-1/+13
If one had a mountpoint at '/e' (don't ask), a file being installed to '/etc' would map to it incorrectly. Ensure we do more than just prefix matching on paths by doing some more sanity checks once the simple strncmp() call succeeds. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-16parseopts: normalize options into an arrayDave Reisner3-27/+17
Modify parse_options logic to fill an array instead of printing parsed options. Avoid eval like the plague. Because it is the plague. Fixes bugs such as FS#28445. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-16pacsysclean: Fix script description and accept -o option without hyphenEric Bélanger1-2/+5
Close FS#28434 Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-15Revert "Add -S --recursive operation"Dan McGee7-56/+9
This reverts commit f3fa77bcf1d792971c314f8c0de255866e89f3f3 along with making other necessary changes to fully back this (mis)feature out until we can do it correctly. The quick summary here is this was not implemented correctly; provides are not fully taken into account in this logic, and making that happen exposes a lot of other flaws in this code that are covered up later on in the dependency resolving process by several other pieces of convoluted and conditional logic. Tests have been adjusted accordingly. Some test EXISTS conditions have been removed as we already know the package is installed locally, and we also are checking the VERSION condition anyway. With these two related revert commits, we do have some changes in test pass/fail results: * upgrade078.py: does not pass, this is due to --recursive getting removed for -U/-S operations after this commit. * sync302.py: the version checks have been disabled, so this test continues to pass but has been scaled back in scope. * sync303.py: now passes, was failing before. * sync304.py: still failing, was failing before. * sync305.py: now passes, was failing before. * sync306.py: still passes, was passing before. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-15Revert "Enable recursive/needed sync on SyncFirst"Dan McGee4-12/+4
This reverts commit 09034520325efcc2e684f05fa7a99c02bad1f5be. Tests affected by this revert have been adjusted; additionally a few EXIST tests have been removed where there is already a VERSION test doing the job for us. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-15makepkg: fix syntax error in remove_depsChristoph Vigano1-1/+1
This fixes a problem that occurs if you tell makepkg to remove installed dependencies (just to be sure) but there are none. As the $ was missing in front of deplist, the check never happened and 'pacman -Rn' was called which obviously failed. Dan: later reported as FS#28448. Signed-off-by: Christoph Vigano <mail@cvigano.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-14Update SIGPIPE signal handler commentDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-14scripts: unset CDPATH if cd is usedDan McGee2-2/+3
This wonderful/awful little bash shell variable wrecks havoc on `cd` calls in shell scripts. Unset CDPATH in makepkg where we use `cd` quite heavily. In pacman-optimize, we can move the change directory logic into the bsdtar call so we are left with no usages of `cd` in the script. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Merge branch 'maint'Dan McGee42-1515/+1137
Conflicts: lib/libalpm/sync.c src/util/pactree.c
2012-02-13Use AM_PATH_GPGME macro from gpgme instead of home-built gpgme detection.Nathan Phillip Brink1-11/+40
Fixes compilation on Gentoo, where CPPFLAGS=-I/usr/include/gpgme is necessary. The AC_SYS_LARGEFILE macro call has to be before the GPGME checks, otherwise the GPGME header gives an error about ABI incompatibilities. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Add gpgme m4 autoconf macro fileAllan McRae1-0/+307
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Do not check for ALPM_ERR_PKG_INVALID_ARCH on remove operationAllan McRae1-6/+0
alpm_trans_prepare can not return ALPM_ERR_PKG_INVALID_ARCH on a remove operation so there is no point in checking for it. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13testpkg: set gpgdirAllan McRae2-0/+5
Without setting gpgdir, testpkg outputs: warning: Public keyring not found; have you run 'pacman-key --init'? Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Reset errno before opening archiveAllan McRae1-0/+1
Set errno to 0 at the start of _alpm_open_archive as it is not set when archive_read_open_fd fails. This can result in _alpm_pkg_load_internal thinking errno == ENOENT and setting the wrong pm_errno. e.g. Before: > testpkg pacman-4.0.1-4-i686.pkg.tar.gz.sig error: could not open file pacman-4.0.1-4-i686.pkg.tar.gz.sig: Unrecognized archive format Cannot find the given file. After: > testpkg pacman-4.0.1-4-i686.pkg.tar.gz.sig error: could not open file pacman-4.0.1-4-i686.pkg.tar.gz.sig: Unrecognized archive format Cannot open the given file. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Move ROOTDIR definition into config.hAllan McRae3-2/+1
This was the only variable of its kind when a define was done on the compiler command line. Move it into config.h instead. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Allow specifying shell for running scriptletsAllan McRae2-1/+10
Some distributions insist on using bash specific commands in their install scripts under the assumption that "sh" is a symlink to bash. This can causes issues if (e.g.) their users what to change sh to point at another shell, such as dash, that does not support these features. Add a configure option to explicitly set the shell being used to run install scripts. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13use _alpm_access in a few more places for increased debugging infoFlorian Pritz3-3/+3
pacman -U <pkg> returns a bogus "could not find or read package" if the file is on a fuse file system that doesn't allow root access. Debug output isn't very helpful here either so we should log why the access check failed. The other 2 checks already log something when failing so logging a more specific error won't hurt either. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13lib/sync: use full delta size as max download sizeDave Reisner1-1/+1
The max filesize for a delta download must be the full size of the delta file, not just what's remaining. Fixes FS#28345 Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-114.0.2 release updatesDan McGee3-2/+28
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11Final pre-release Transifex updatesDan McGee5-130/+182
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11pactree: allow comments after repo section headerAllan McRae1-6/+6
Duplicate the fix in config file parsing from d95c0494. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11makepkg: disable extglob when sourcing BUILDSCRIPTAllan McRae1-0/+4
PKGBUILDs are advertised as being pure bash so it would be expected that the default bash options are in effect when sourcing it. This inadvertantly "fixes" FS#27780 where enabling extglob causes the bash parser to error on non-valid bash function names like package_libxml++(). Note that these function names are unsupported in bash and could break again even with this "fix" in future bash releases. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11makepkg: deal with mercurial exit codesAllan McRae1-2/+7
From mercurial-2.1, "hg pull" returns 1 when there are no updates. Catch the return code and either pull the update or return an error as appropriate. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Fix a handful of comment typos or misspellingsDan McGee3-8/+10
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Translation updates from Transifex, mostly scriptsDan McGee30-1400/+933
This is after some manual massaging to fix issues with newlines in some translations of the script catalogs. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Merge branch 'maint'Dan McGee40-228/+265
Conflicts: lib/libalpm/alpm_list.c
2012-02-06makepkg.sh.in - if both -r and -i are provided, only remove makedepsAndrew Gregory1-1/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06ALPM API adjustments for sanity and consistencyDan McGee16-94/+93
This makes several small adjustments to our exposed method names, and in one case, parameters. The justification here is to make methods less odd in their naming convention. If a method takes an alpm_db_t argument, the method should be named 'alpm_db_*', but perhaps more importantly, if it doesn't take a database as the first parameter, it should not. Summary of changes: alpm_db_register_sync -> alpm_register_syncdb alpm_db_unregister_all -> alpm_unregister_all_syncdbs alpm_option_get_localdb -> aplpm_get_localdb alpm_option_get_syncdbs -> aplpm_get_syncdbs alpm_db_readgroup -> alpm_db_get_group alpm_db_set_pkgreason -> alpm_pkg_set_reason All methods keep the same argument list except for alpm_pkg_set_reason; there we drop the 'handle' argument as it can be retrieved from the passed in package object. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06alpm.h: enum cleanups, comment formatting cleanupDan McGee1-27/+23
Don't use trailing commas in enums if people really want to use a strict C89 compiler, and document why on earth one particular enum uses bitmask values when it doesn't seem necessary. With comments, shoot for more consistency. When something is a one-liner, keep it that way and move the whole /** sequence */ to one line. When it needs more than one line, ensure we format most of them in a similar fashion. Two minor function signature adjustments are made that don't change anything other than matching the parameter name (name -> filename) and fitting in with our coding style (type* var -> type *var). Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Remove last explicit include of config.hDan McGee1-2/+0
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Update translations from TransifexDan McGee29-210/+211
The pacman-scripts catalog is omitted here due to various newline errors I don't have the time to fix right now. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06remove.c: make "target not found" error consistent with sync.cAndrew Gregory1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06makepkg.sh.in - fix remove_deps test for deps to be removedAndrew Gregory1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06makepkg: add forgotten newline in help outputMantas Mikulėnas1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-03pactest: check return code in some upgrade testsDan McGee4-0/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-03Add simple integer-only pow() implementationDan McGee1-2/+13
We hardly need the complexity (or slowness) provided by the libm power function; add a super-cheap one that suits our needs and is specialized for the values we plan on passing in. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-03Fix FS#27924: don't display negative zeroesThomas Dziedzic4-13/+22
Dan: don't compute lower bound unless needed, flip argument order so out values are last, add param Doxygen documentation. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-31makepkg: Fix non-writable SRCPKGDEST error messageAllan McRae1-0/+5
Provide a helpful error message for when creating a source tarball and SRCPKGDEST is not writable. Fixes FS#28197. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-31Fix rare segfault on package removalAllan McRae1-1/+4
Very rarely a segfault would occur when removing a number of packages due to a corrupted list for the local database (FS#27805, FS#28195). This was caused by the alpm_list_msort function not correctly dealing with the two new head node's prev values. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Merge branch 'maint'Dan McGee64-938/+2509
Conflicts: scripts/makepkg.sh.in
2012-01-30pacman-key: call gpg fewer times for revocation keysDave Reisner1-6/+5
Instead of iterating over the revocation keyfile and calling gpg once for each key, map the file into an array and call gpg once, iterating over this output to mark each key as revoked. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30pacman-key: simplify trusted keyring iterationDave Reisner1-8/+6
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Update translationsDan McGee55-817/+2347
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Update pot translation catalogsDan McGee2-19/+59
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Make a few more copyright date tweaksDan McGee3-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-12-02 12:47:26 +0000