| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
repo-add and db_read both assume that REPLACES and FORCE fields are in the
desc file, so do that for db_write as well (instead of depends file).
Note that db_write is currently only used on the local database. And the
only purpose of replaces and force in local database is for information
purpose (available on -Qi operations). So this is not a big problem.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-May/011859.html
Acked-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adds the sync equivalents of upgrade010.py and upgrade070.py.
Both additional test pass.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Acked-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch removes the code block in makepkg that checked for depreciated
options in a PKGBUILD and provided a workaround. Unknown and depreciated
options are upgraded to error conditions.
Also, removed TODO regarding including install script if exists and $install
is unset. That should never happen.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Name and version are computed from "/var/lib/pacman/..." pathname. And the
%NAME% and %VERSION% fields from the desc file were not even read. So now,
when we read the desc file, we make sure the %NAME% and %VERSION% fields are
consistent.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In the case of -Rs operation, first pulling the dependencies with
recursedeps before calling checkdeps takes care of the dependency chain of
remove052 pactest.
In the case of -Rcs, we can keep the old behavior because we have no problem
there (any dependency returned by checkdeps will be added to the remove list
because of -Rc) and we have to run recursedeps on the final remove list
anyway to catch all orphans.
Ref.: http://www.archlinux.org/pipermail/pacman-dev/2008-April/011569.html
Signed-off-by: Nagy Gabor <ngaba at bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adds a test for when removing multilpe packages recursively from a
chain of dependent packages. This situation can occur when removing
installed dependencies with makepkg if a "makedepend" recursively depends on
a "depend" or if redundant dependancies are included.
Signed-off-by: Allan McRae <mcrae_allan at hotmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Catches error from when pacman is unable to remove dependencies after
successfully building package and prints warning. Fixes FS#10039.
Signed-off-by: Allan McRae <mcrae_allan at hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
On BSD systems using a dot as a separator is not allowed. On Mac OSX it
is deprecated. A colon should be used instead. BSD systems also use the
"wheel" group instead of "root" to indicate the "super user" group. Both
groups use the id of 0.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Acked-by: Aaron Griffin <aaronmgriffin@gmail.com>
Acked-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
For some reason `file` on Mac OSX has different arguments than BSD and
Linux; -i no longer prints out the mime strings. With the environment
variable COMMAND_MODE set to "legacy", `file` behaves more like it does
on Linux and BSD, i.e., `file -i` prints the mime type.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Acked-by: Dan McGee <dan@archlinux.org>
Acked-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When fakeroot was not in BUILDENV and the user was not root, makepkg still
tried to use fakeroot for building packages.
BUILDENV is now checked to see if fakeroot is enabled. If it is not enabled the
package can still be built, but root will not have ownership of files. This is
useful when users want to make packages for personal use and don't care about
ownership.
Closes FS#10450.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#10459.
There is apparently no portable ways to get the apparent size of a file,
like du -b does. So the best compromise seems to get the block size in kB,
and then convert that to byte so that we keep compatibility.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The "-s" argument does not exist on BSD, and neither does
"--remove-destination". This patch replaces the calls to "cp -s
--remove-destination" with the equivalent "rm -f" and "ln -s" calls, in
order to increase portability.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Some small adjustements according to feedback from users of chinese forum.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Glad we have so many developers using this as their native architecture.
int/size_t issue here.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is one of those rare cases where we actually want to code in a
platform-specific #ifdef. Because you don't need to be the root user on a
Windows box, and fakeroot doesn't exist so we can do easy testing, lets
disable any checking of the UID.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Only use fakeroot and fakechroot when they are found AND required.
fakechroot only had the first condition, and fakeroot only the second.
When they are required (user != root) but not found, display a warning.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Actually, just rename _alpm_versioncmp to alpm_pkg_vercmp and get rid of the
need for a wrapper since it did nothing anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This code hasn't been looked at in some time. I grabbed a more recent
version of the RPM source (4.4.2.3) and attempted to sync up any changes
they have made, as well as make the libalpm additional code much cleaner and
limited to only a few added lines of code.
The size of this patch might make you think we added code, but bloat-o-meter
actually tells us otherwise:
<function> <old> <new> <diff>
_alpm_versioncmp 1485 1021 -464
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Any real call of this function doesn't specify a name or version ahead of
time, so just kill that functionality off. Now to remove those dummy
packages...
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If we have a package without name and/or version, we are really out of luck.
Speed these functions up by removing unnecessary code. Note that both the
splitname and pkg_load functions, where the name and version of packages are
initially populated for databases and pkg.tar.gz files respectively, enforce
that every new package struct created has a name and version.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 046003844739416ff6d168dd2dec76490adb0727 caused a regression when
rereading the pkgcache after updating the on-disk databases. A rewinddir
call was errantly removed.
Instead of replacing the call to rewindir, clean up this whole mess.
db_scan is used only once and with target == NULL so there was actually half
the code of db_scan which was unused. This is gone now and replaced by a
single new db_populate function.
Dan: add_sorted ended up being 3x slower than one msort at the end, so I
changed back to that. I also made one pointer variable const and merged this
whole patch with my original fix for the rewinddir issue.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This really should be in an external script, as it is not makepkg's job to
rebuild your system.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This has been around since at least pacman 2.9.8. Frugalware just dumped it
in commit 113ec73bfcfdc, and deleting it here and running pactest shows that
nothing that we have actually tested changes. If someone can pactest the
edge case where this is needed, then show me the money.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch offers a way to fix FS#9228.
By putting "SyncFirst = pacman" in pacman.conf, the version check will
happen before the transaction really starts, and before any replacements is
made.
Otherwise, no version check is done.
The sync301 pactest was updated to use this SyncFirst option.
Example session with SyncFirst = pacman, and a newer pacman version
available :
$ pacman -Su (or pacman -S <any targets>)
:: the following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n]
resolving dependencies...
looking for inter-conflicts...
Targets: pacman-x.y.z-t
Total Download Size: x.xx MB
Total Installed Size: x.xx MB
Proceed with installation? [Y/n] n
As Nagy previously noted, doing this check on any -S operations might look
intrusive, but it can be required.
For example, the case where you want to install a package with versioned
provisions, using a pacman version which didn't support that feature yet
(and there is already a newer pacman in sync db supporting it).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* remove obsolete and unused *_cmp helper functions like deppkg_cmp and
_alpm_grp_cmp
* new alpm_list_remove_str function, used 6 times in handle.c
* remove _alpm_prov_cmp / _alpm_db_whatprovides and replace them by
a more general alpm_find_pkg_satisfiers with a cleaner implementation.
before: alpm_db_whatprovides(db, targ)
after: alpm_find_pkg_satisfiers(alpm_db_getpkgcache(db), targ)
* remove satisfycmp and replace alpm_list_find + satisfycmp usage by
_alpm_find_dep_satisfiers.
before : alpm_list_find(_alpm_db_get_pkgcache(db), dep, satisfycmp)
after : _alpm_find_dep_satisfiers(_alpm_db_get_pkgcache(db), dep)
* remove _alpm_pkgname_pkg_cmp, which was used with alpm_list_remove, and
use _alpm_pkg_find + alpm_list_remove with _alpm_pkg_cmp instead.
This commit actually get rids of all complicated and asymmetric _cmp
functions. I first thought these functions were worth it, be caused it
allowed us to reuse list_find and list_remove. But this was at the detriment
of the clarity and also the ease of use of these functions, dangerous
because of their asymmetricity.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now the syntax is coherent with alpm_list_find and alpm_sync_find.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This doesn't exist anymore, the header file was removed a while back in
commit 4c872594da321aa406cfb306c32c94ce2929d59e.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/package.c - comment location moved to be_package.c
|
|
alpm_pkg_load() and parse_descfile() are specific to getting information
from package files, just as other code is specific to getting information
into or out of a package database. Move this code out of package.c, which
should eventually only contain operators on the pmpkg_t struct that do not
depend at all on where the data came from.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We have some useless abstractions like an alpm_db_rewind function. I've read
somewhere that readdir() was the worst filesystem function call invented,
and what do we do? Add a wrapper around it. Kill this abstraction and move
some other things into be_files that should be there anyway because they
are so tied to how a files backend works.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Tested using many easily generated error conditions. Also added "malloc
failure" (conf.c) and "segmentation fault" (pacman.c) error messages for
translation.
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
[Dan: fix trailing whitespace errors, other compilation issues]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
A libtool upgrade broke the gdb option as we need a MODE specified; add the
execute mode to the call.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
It was unclear what "loading the full package" actually did. The
detailed description should clear that up, without having to look at the
code.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The paclist script provides a simple method for monitoring which packages
are installed from a given repo. This is particularly useful when using a
testing or unstable repository.
Thanks to Allan McRae for the idea and an initial bash script. As suggested
by Dan, I tried to rewrite in perl, and this resulted in much better
performance. Then Dan further cleaned up the script.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: add to Makefile & README, minor script cleanups]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This rewrite in perl blows the socks off the old shell script version for
large searches:
$ time ./pacsearch.perl ^.*$ >/dev/null
real 0m0.836s
user 0m0.593s
sys 0m0.217s
$ time pacsearch.sh ^.*$ >/dev/null
real 1m53.818s
user 1m16.818s
sys 0m33.694s
Functionality and output is identical to the old version with the exception
of the old version's missing EOL after all the output. It should be a lot
easier to add new things like the --color flag that has been a TODO at the
top of the script for a long time.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The start of a few commits to remove some PATH_MAX usage from our code. Use
a dynamically allocated string instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
They are pretty noisy scripts in their normal course of operations, so allow
all messages to be squashed except for warning and error messages with this
new flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I've always found it odd why the package version is shown at the start but
not the end of the package build. Fix it, and while we are at it, add the
$CARCH variable to the display too.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We only need a copy of this string once we know we are going to extract it,
and we don't need a static buffer to copy it into since it is coming from a
known-length string.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
XySSL 0.9 was released; sync our code with the upstream source. Note that
there weren't any real changes besides renaming of macros, so nothing much
to see here.
The biggest change may be the licence- it is now GPL/BSD software rather
than LGPL/BSD. The license header is changed to reflect this.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Most of these are not easy to remove, but I could kill the ones in the two
lastupdate functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When taking a look at PATH_MAX usage, I found a few small things we can
clean up or fix.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
From http://www.stack.nl/~dimitri/doxygen/config.html#cfg_javadoc_autobrief
JAVADOC_AUTOBRIEF
If the JAVADOC_AUTOBRIEF is set to YES then doxygen will interpret the
first line (until the first dot) of a JavaDoc-style comment as the brief
description. If set to NO (the default), the Javadoc-style will behave just
like regular Qt-style comments (thus requiring an explicit @brief command
for a brief description.)
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
It is hard to decipher what the transaction events actually notify you
of, and what parameters are passed to the callback function, without
looking at the code. This patch adds documentation for the _pmtransevt_t
enum in order to clarify what the event is for and what data is passed
when the callback is called.
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Rework to use a single #define for the buffsize, and in the process clean up
some other code and double the default buffer size.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were a bit juryrigged using one call to mkstemp() before rather than
extracting the new files side-by-side and doing our comparisons there. We
were also facing some permissions issues. Instead, make our life easier by
extracting all temp files to a '.paccheck' extension, doing our md5
comparisons, and then taking the correct actions.
Still to be done here- a cleanup of the use of PATH_MAX which should not be
necessary if we use dynamic allocation on the heap.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This should allow some future tests to set modes and ensure they are set
after installation. It is also in anticipation of a test for checking
permissions on pacnew files.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I'm not sure why these were ever here, as by this point we have already
extracted the file meaning a call to this function is basically a no-op.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Inside tidy_install, change the section which strips libraries to use find |
while read rather than for foo in `find`. This should allow whitespaces in
filenames to still be processed correctly.
This fixes FS#10294.
Signed-off-by: Daenyth Blank <Daenyth+git@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|