Age | Commit message (Collapse) | Author | Files | Lines |
|
Due to the way we funk around with package data loading, we had a condition
where the filelist got doubled up because it was loaded twice.
Packages are originally loaded with INFRQ_BASE. In an upgrade/sync, the
package is checked for file conflicts next, leaving us in an "INFRQ_BASE |
INFRQ_FILES" state. Later, when committing a single package, we have an
explicit call to _alpm_local_db_read() with INFRQ_ALL as the level. Because
the package's level did not match this, we skipped over our previous "does
the incoming level match where I'm at" shortcut, and continued to load
things again, because of a lack of fine-grained checking for each of DESC,
FILES, and INSTALL.
The end result is we loaded the filelist twice, causing our remove logic to
iterate twice over the installed files, spewing a bunch of "cannot find file
X" messages.
Fix the problem by doing a bit more bitmasking logic throughout the load
method, and also fix the sanity check at the beginning of the function- this
should *only* be used for local packages as opposed to the "not a package"
check that was there before.
A debug log message was added to upgraderemove as well to match the one
already in the normal remove codepath.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These are probably useful anyway, but also exposed the double file list bug
that will be fixed in a later commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will prevent duplicates, which we had plenty of once I made a few tests
that had a list of files greater than the normal two. The previous logic was
not working quite right.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were missing this in a few places; also add the ability to check the
outcome via a new rule type.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
No real need to use the smaller floating point types here.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Remove a stale comment
* Fix a logic error- the conditional disagreed with the comments
* Remove some unnecessary floating point casts
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were checking if a package existed locally, but then using the
incoming package to calculate removed size rather than the currently
installed package.
Also adjust the local variable in the replaces loop to make it more
clear that we are always dealing with local packages here.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
All of these can be done with integer division; the only slightly
interesting part is ensuring we round up like before with calling the
ceil() function.
We can also remove the math library from requirements; now that the only
ceil() calls are gone, we don't need this anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
file_pkg_ops can be a static struct like in other backends, we just need
to initialize it at some point.
Dan: add initialization flag.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
None of these warn at the normal "-Wall -Werror" level, but casts do occur
that we are fine with. Make them explicit to silence some warnings when
using "-Wconversion".
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There is a lot of swtiching between size_t and int for alpm_list sizes
in the codebase. Start converting these to all be size_t by adjusting
the return type of alpm_list_count and fixing all additional warnings
given by -Wconversion that are generated by this change.
Dan: a few more small changes to ensure things compile, adjusting some
printf format string characters to accommodate the larger size on x86_64.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We've managed to duplicate this four times at this point, so make it a
method in util.c instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
And change the wording slightly to indicate we *print* a value, not *return*
it. You can't return negative values (they get coerced to 255), so it isn't
worth it to try and cram the result into the return code.
Acked-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We never wrote it here, so no need to read it in either.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
No need to use 0/1 when we can use False/True for the force option.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Stopped being used after commit fa933df65b9.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/sync.c
test/pacman/tests/ignore007.py
|
|
All functions that are limited to the local translation unit are
declared static. This exposed that the _pkg_get_deltas declaration
in be_local.c was being satified by the function in packages.c which
when declared static caused linker failures.
Fixes all warnings with -Wmissing-{declarations,prototypes}.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fixes FS#19854.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This makes the following commits more readable.
No logic was changed in this commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* FS#19854 (--ignore is ignored with groups)
* http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html
(operation aborts when a package from a group is ignored/and user chooses
not to install it)
If a group member is ignored, we expect
a) a question whether to install
b) after saying 'no' to a), the ignored member not to be installed
c) all other group members to be installed
d) pacman to execute successfully
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 9d0b33fd3327ae6d2b15f50870c0885a2068d492)
|
|
char * -> const char *.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Add the "buildflags" option, which is useful in its negative form
for disabling CFLAGS, CXXFLAGS and LDFLAGS when building a package.
This is useful when determining of one of these flags is causing
an issue with a package.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
A PKGBUILD can have an option check() function for running test suites
between the build() and package() stages. This function is run by
default but can be disabled globally in with "!check" in BUILDENV in
makepkg.conf. This setting can be controlled on an individual package
basis using makepkg's --check and --nocheck flags. Addition dependencies
needed for running the test suite can be specified in the checkdepends
array and are only checked when running the check() function.
Original-work-by: Jeff C <jeff@kcaccess.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We use PATH_MAX everywhere by including limits.h so there is no
point in doing a check for it in a different header when dealing
with FreeBSD's libfetch.
Also, remove autoconf check for strings.h header as it is not used
anywhere.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
POSIX does not require PATH_MAX be defined when there is not actual
limit to its value. This affects HURD based systems. Work around
this by defining PATH_MAX to 4096 (as on Linux) when this is not
defined.
Also, clean up inclusions of limits.h and remove autoconf check for
this header as we do not use macro shields for its inclusion anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The closing parenthesis of bash arrays needs to be escaped in the ending
address of awk expressions in order to play nicely with implementations
of awk other than gawk. This change provides compatibility with gawk,
nawk and mawk.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Currently, using $pkgname in a split package package_*() function
always returns the first value in the pkgname array rather than the
name of tha package being packaged. Fix this so $pkgname gives the
expected value.
Fixes FS#22174
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
|
|
Just like we did for package name comparsions, if we add a depend name_hash
field on depend struct initialization, we can use it instead of doing a
string name comparison, saving us a lot of checks in the depcmp code.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Noticed when tweaking testdb, when we run _alpm_depcmp in loops and call it
seven million times, the strdup()/free() combo can add up. Remove the need
for any string duplication by some pointer manipulation and use of strncmp
instead of strcmp. Also kill the function logger and add an escape so we
don't needlessly retrieve the list of provides.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This creates two packages with extremely long description lines (500KB and
600 KB), causing our archive read code to perform reallocation to store the
whole contents. One of the packages will successfully read while the other
will fail for the time being.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
And modify the code to not print the full rule string if it is more than 40
characters long; truncate it instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The old function was written in a time before we relied on it for nearly
every operation. Since then, we have switched to the archive backend and now
fast parsing is a big deal.
The former function made a per-character call to the libarchive
archive_read_data() function, which resulted in some 21 million calls in a
typical "load all sync dbs" operation. If we instead do some buffering of
our own and read the blocks directly, and then find our newlines from there,
we can cut out the multiple layers of overhead and go from archive to parsed
data much quicker.
Both users of the former function are switched over to the new signature,
made easier by the macros now in place in the sync backend parsing code.
Performance: for a `pacman -Su` (no upgrades available),
_alpm_archive_fgets() goes from being 29% of the total time to 12% The time
spent on the libarchive function being called dropped from 24% to 6%.
This pushes _alpm_pkg_find back to the title of slowest low-level function.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Sync DB's no longer have an extracted directory, so remove the files check
for those. Local databases no longer have a 'depends' file, so kill that
check as well. Finally, do a little other cleanup and remove the need for
PATH_MAX.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The amount of diskspace needed for a transaction can be less than
zero. Only test this against the available disk space if it is
positive, which avoids a comparison being made between signed and
unsigned types (-Wsign-compare).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Always declare a function with (void) rather than () when we expect
no arguements. Fixes all warnings with -Wstrict-prototypes.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We should always use $BUILDSCRIPT instead of PKGBUILD. The only
remaining uses of PKGBUILD in makekg are in comments.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This simplifies a lot of the repetative code and makes it obvious where the
tricky or different ones are (e.g. depends, dates). It also makes it
significantly easier to change the way this code works in the future.
There should be no functional change with this patch.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
It is the minimum of 5% of disk capacity or 20 MiB on a per-partition basis.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add some basic documentation for the PKGEXT and SRCEXT options in
makepkg.conf. Fixes FS#21302.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Saves a few bytes due to padding (256 -> 248 bytes), especially on x86_64,
so we get the overhead of our new hash field right back.
Signed-off-by: Dan McGee <dan@archlinux.org>
|