summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2007-10-28makepkg: add explicit dir to find callsDan McGee1-3/+3
Some of the find calls did not have a path, which isn't valid in some versions of the find utility. Add a . for compatibility. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-26Integrate versionpkg into makepkgScott Horowitz1-4/+86
If PKGBUILDs use the correct svn/cvs/etc variables, determine the latest revision number and force this as the pkgver for building. Signed-off-by: Scott Horowitz <stonecrest@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-26Clean up LDADD usageDan McGee2-5/+2
We had a lot of unnecessary overstatements of libraries to include on linking, and autoconf/automake takes care of this for us. This also helps some compilation issues on other platforms. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-26Fix mcheck detection and usageDan McGee2-7/+9
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-26Explicitly cast void* to char* during printf callDan McGee1-4/+4
If we don't have an explicit cast, make fails during -Wall -Werror. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-26dependency error message fix in libalpm/remove.cNagy Gabor1-1/+1
Normally you must never see that error message. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-26Dependency error/log messages fixNagy Gabor3-9/+17
The old code used only the depend.name in messages, which might have not been informative. The new code uses the whole dependency string in %DEPENDS% format. (Dan: slight English clarification in one of the messages) Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-26makepkg: readd -p option that was lost in getopt conversionDan McGee1-0/+1
The -p option was accidentally dropped in commit 54b71f0427e87e6d525423df06f8a06f2b71c518. Readd it. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-25Add alpm_dep_get_string methodNagy Gabor5-31/+44
Public alpm_dep_get_string function is introduced, which converts a pmdepend_t structure to printable string in %DEPENDS% format. This function is now used in pacman to print dependency error messages. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-24_alpm_depmiss_isin fixNagy Gabor1-2/+5
The old code used memcmp, which is not good for comparing strings: "pkgname"'\0''\0' should be equal to "pkgname"'\0''a' for example. The new code uses strcmp. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-24Add strndup implemention for environments that are missing itDan McGee2-0/+26
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-23One more added include to help compilation elsewhereDan McGee1-0/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-23Replace UK mirror with a new updated oneDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-23Print and typecast time_t correctlyDan McGee1-4/+3
The recommended C99 way to print the value of a time_t is to cast it to uintmax_t or intmax_t. Do this to ensure compatability with all platforms. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-22Ensure all localization stuff is correctly guardedDan McGee4-6/+14
Anything dealing with libintl and localization should be correctly guarded inside an ENABLE_NLS block on both the pacman and libalpm sides. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-22Fix broken or missing includesDan McGee4-8/+11
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-22Fix invalid static scoping of strverscmpDan McGee2-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-19Add download size to target list.Nathan Jones6-7/+47
This displays the download size, taking into account delta files and cached files. This closes FS#4182. Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-19Download delta files if UseDelta is set.Nathan Jones9-4/+300
Delta files will be used if the size is smaller than a percent (MAX_DELTA_RATIO) of the package size. Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-19Refactor md5sum checking.Nathan Jones1-44/+89
This will allow deltas and packages to share the md5sum checking code. Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-19Add pmdelta_t structure and functions to libalpm.Nathan Jones11-1/+380
Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-19Add delta information to the repository database.Nathan Jones1-1/+55
(Dan: cleaned up one if statement) Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-18Add Hungarian mirrorDan McGee1-0/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-18scripts/makepkg.sh.in: Strip bins/libs in all {bin, sbin, lib} directories.Andrew Fyfe1-1/+1
In one of the original clean up patches[1] I changed the search path for stripping binaries and libraries. This resulted in only usr/{bin,sbin,lib} being searched. This patch reverts that change. [1] 721ceee1e2c9b18425d84cf39f6541b2f04072b3 Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
2007-10-18libalpm/package.c : fix requiredby with multiple providers.Chantry Xavier1-5/+2
The code didn't match the following comment : "A depends on B through n depends <=> A listed in B's requiredby n times" It stopped at n=1 with a break. I was surprised to see this case happens in real, that's how I noticed the bug: wine depends on both freeglut and glut, while freeglut provides glut. So when installing wine, the update_depends function listed wine twice in freeglut's requiredby. But the compute_requiredby function (used when installing freeglut, and used by testdb) listed wine only once in freeglut's requiredby. That made testdb unhappy. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-16Remove rounding on package size totalsDan McGee1-14/+2
We print the total to two decimal places, so there is no real need for rounding of the values. Remove the rounding and switch all output to two decimal places. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-14Fix scriptlet pactest cases so they 'succeed' againDan McGee2-0/+10
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-14libalpm/trans.c : fix a recently introduced breakage in scriptlets handling.Chantry Xavier1-6/+10
Commit 4853a4aad97fe36f9237ffb7356201adab507a1c used the tmpdir variable for checking the existence of /bin/sh, without resetting it. This caused /bin/sh to be deleted during the cleanup part, as soon as a scriptlet other than pre_upgrade or pre_install was executed. For example, on the first post_upgrade during a -Su. I introduced two variables : clean_tmpdir and restore_cwd, for deciding what should be done in the cleanup part. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-10-14libalpm/trans.c : remove the DBPath <-> RootDir dependence in runscriptlet.Chantry Xavier1-15/+21
This code assumed that DBPath was under RootDir, while this is not necessarily the case : pacman doesn't enforce anymore than DBPath is under RootDir. So now, all scriptlets will be put somewhere in RootDir/tmp/, so that when it chroots in RootDir, the scriptlets are still available inside the chroot. This also removes the need of normalizing both dbpath and rootdir, in order to do computation on the paths. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-10-14pacman/pacman.c : put back root check even if -r is specified.Chantry Xavier1-3/+1
Root is needed for most install / remove operation, because it's needed for chrooting, for running scriptlets. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-10-14Manually check xdelta exit codes.Nathan Jones1-9/+20
This is needed because 'xdelta delta' returns 1 even when the delta creation succeeds. This was causing makepkg to exit after the command due to bash's -e option. Some information from the xdelta man page: The delta command exits with status 0 to indicate that no differences were found, with status 1 to indicate that some differences were found, and with status 2 to indicate an error of some kind. Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-14Updates to fix Doxygen documentation generationDan McGee5-13/+11
We had way too much going on with the Doxygen manpage generation. Clean it up quite a bit by removing directory manpages, using relative paths, not having a manpage for every single alpm function, and ensuring internal functions are not documented publicly. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-10util/testdb: fix up function namingDan McGee1-4/+4
We shouldn't use the _alpm prefix (copy-paste issue, no big deal). Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-09Add two new pactests to check symlink behaviorNagy Gabor2-0/+37
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-09Add new French Arch mirrorDan McGee1-1/+1
Fix Aaron's busted-a** commit. :P Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-09New French mirror at ftp.free.frAaron Griffin1-0/+1
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-10-08Add gcc format attribute to _alpm_log, catch a few bugs in the processDan McGee4-6/+8
This fixed a few of our formatted output strings that were broken before but never being checked. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-08libalpm/package.c: ensure we use package name when loading packagesDan McGee1-4/+7
Some of the error messages in _alpm_pkg_load failed to use the pkgname value when printing, which made error messages rather hard to decode. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-08pacman/pacman.c : add --logfile option.Chantry Xavier1-0/+10
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-10-08Update usage of gcc __attribute__ flagsDan McGee3-5/+5
Change the default visibility of libalpm functions to internal instead of hidden- this allows for slightly better optimization because it tells GCC that the function can never be called outside of the current module (see http://gcc.gnu.org/onlinedocs/gcc/Function-Attributes.html). Also added some attributes to the pacman print functions so that they check the format strings being passed to them. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-08Clean up the scriptlet fork code a bit, honor the child return valueDan McGee1-3/+20
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-08Add new (failing) sync pactestNagy Gabor1-0/+18
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-08Remove the non-user friendly --ask optionDan McGee3-93/+35
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-08Fix backward compatibility with non-epoch builddatesDan McGee1-3/+8
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-08Add new french mirrorDan McGee1-0/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-08pacman-optimize: add check for diff/diffutilsDan McGee1-0/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-04Fail loudly is scriptlets cannot be run via /bin/shAaron Griffin1-0/+7
If /bin/sh is missing in the root directory, scriptlets cannot be executed, as we're explicitly calling it. Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-10-04Fix -Sy and -Sp operations.Chantry Xavier2-3/+3
When the -Sy operation failed, the lock wasn't removed because alpm_trans_release wasn't called. This is fixed now. Also, after my last change in commit 52e7e6d74733f7a431376a9e528c4fe4d3732068 , Sp didn't do anything anymore. That's because needs_transaction returned false for -Sp, so the sync transaction wasn't run. However, the current implementation of -Sp requires a sync transaction. Also, since a transaction creates the lock file at the beginning, and releases it at the end, this mean that -Sp requires root access anyway.. I think I understand now why Aaron found that the current -Sp implementation is hackish :) Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-10-04makepkg: Fix typo to make xdelta creation work.Nathan Jones1-1/+1
Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-10-03needs_transaction adjustmentsChantry Xavier3-55/+69
I just moved the root path check out of needs_transaction, and put it directly in pacman.c . I think this part is alright. For the other problems, I thought about doing the transaction first, in a new sync trans function, which will init and release a transaction. And then doing the commands like -Ss / -Sl / -Sg / -Si. The problem is that for commands like -Sys / -Syl / etc, only the refresh part of the transaction should be done. So I had to introduce an ugly sync_only hack. Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-18 17:26:10 +0000