summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-10-26paccache: ensure seen/seenarch vars are setDave Reisner1-0/+1
Doesn't do a whole lot of good to compare against values that are never set. Fixes bug where -vvv output wasn't grouping packages together properly. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-26Fix issues with replacing unowned symlinksDan McGee3-18/+19
There aretwo seperate issues in the same block of file conflict checking code here: 1) If realpath errored, such as when a symlink was broken, we would call 'continue' rather than simply exit this particular method of resolution. This was likely just a copy-paste mistake as the previous resolving steps all use loops where continue makes sense. Refactor the check so we only proceed if realpath is successful, and continue with the rest of the checks either way. 2) The real problem this code was trying to solve was canonicalizing path component (e.g., directory) symlinks. The final component, if not a directory, should not be handled at all in this loop. Add a !S_ISLNK() condition to the loop so we only call this for real files. There are few other small cleanups to the debug messages that I made while debugging this problem- we don't need to keep printing the file name, and ensure every block that sets resolved_conflict to true prints a debug message so we know how it was resolved. This fixes the expected failures from symlink010.py and symlink011.py, while still ensuring the fix for fileconflict007.py works. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Add some unowned symlink replacement testsDan McGee4-1/+77
These should all prevent installation, and yet two of the three tests currently fail. Not good. The best way to see what is going on here is to diff the three new tests side by side- there is only a small difference between the three tests, and that is in the destination of the symlink in question that should never be overwritten. symlink010.py: myprogsuffix -> myprog symlink011.py: myprogsuffix -> broken symlink012.py: myprogsuffix -> otherprog Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-26Don't realloc a 0-length files array when loading packagesDan McGee1-8/+10
There is some pecular behavior going on here when a package is loaded that has no files, as is very common in our test suite. When we enter the realloc/sort code, a package without files will call the following: files = realloc(NULL, 0); One would assume this is a no-op, returning a NULL pointer, but that is not the case and valgrind later reports we are leaking memory. Fix the whole thing by skipping the reallocation and sort steps if the pointer is NULL, as we have nothing to do. Note that the package still gets marked as 'files loaded', becuase although there were none, we tried and were successful. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25lib/sync: inform callers of compute_download_size of a partialDave Reisner1-2/+6
Extend the return values of compute_download_size to allow callers to know that a .part file exists for the package. This extra value isn't currently used, but it'll be needed later on. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Fix libtool detection of --as-needed flagAllan McRae1-3/+6
The fix for -Wl,--as-needed in commit b0f9477f assumes that --as-needed/--no-as-needed is the only option given in a -Wl line. However, it is perfectly valid to specify multiple flags comma separated after a single -Wl (e.g. the default LDFLAGS in Arch Linux makepkg.conf). Adjust the fix so it detect --as-needed in a more general context > readelf -d lib/libalpm/.libs/libalpm.so.?.?.? | grep NEEDED | wc -l Before: 13 After: 5 Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-25Update libtool filesAllan McRae2-35/+51
Update for libtool-2.4.2 while keeping the fix for --as-needed from commit b0f9477f. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-24Add more logging to download codeDan McGee1-3/+11
This adds a logger to the CURLE_OK case so we can always know the return code if it was >= 400, and debug log it regardless. Also adjust another logger to use the cURL error message directly, as well as use fstat() when we have an open file handle rather than stat(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21bacman: pkgrel does not have to be an integerlolilolicon1-1/+1
pkgrel, as with pkgver, simply mustn't contain hyphens. Signed-off-by: lolilolicon <lolilolicon@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Remove remaining usages of fprintf() from frontendDan McGee2-4/+5
These can either be replaced with pm_printf() if they are error related, or in the fprintf(stdout, ...) case a bare printf() will do. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Remove pm_fprintf() in favor of pm_printf()Dan McGee8-60/+47
Now that pm_printf() always prints to stderr, we don't need this second function that was always used with stderr as the first argument. Thus, this patch removes the function and makes the following sed replacement: sed -i -e 's#pm_fprintf(stderr, #pm_printf(#g' src/pacman/*.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-21Use stderr as output stream for pm_printf()Dan McGee1-1/+1
This matches what we now do in our backend callback function- all debug/info/warning/error/etc. messages should be on stderr. These are all the messages with a "warning:" or other type prefix, so does not affect general pacman output. This should fix the output confusion noted in FS#26555. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17pacman-key: add a default keyserver timeout value on --initDan McGee1-0/+1
The default is supposidely 30 seconds from the gpg manpage, but that sure wasn't what I was seeing- it was somewhere closer to two minutes of silence. Add a more reasonable 10 second timeout value which should be good enough for any keyserver that doesn't totally stink at it's job. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17Show an error message on failed remote key lookupDan McGee1-2/+2
The absolutely terrible part about this is the failure on GPGME's part to distinguish between "key not found" and "keyserver timeout". Instead, it returns the same silly GPG_ERR_EOF in both cases (why isn't GPG_ERR_TIMEOUT being used?), leaving us helpless to tell them apart. Spit out a generic enough error message that covers both cases; unfortunately we can't provide much guidance to the user because we aren't sure what actually happened. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-17Table display: print message with warning: prefixDan McGee1-1/+2
Use the normal error functions here rather than a bare fprintf(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14makepkg: don't attach traps until after argument parsingDan McGee1-11/+9
Nothing we do in our traps is necessary this early in the script. This fixes FS#26196. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-14Add missing #ifdef around cURL error code in download structDan McGee1-0/+2
Thanks to Eduardo Tongson on the mailing list. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Coding style cleanupsDan McGee1-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13curl_gethost() potential bug fixupsDan McGee1-10/+14
This is in the realm of "probably not going to happen", but if someone were to translate "disk" to a string longer than 256 characters, we would have a smashed/corrupted stack due to our unchecked strcpy() call. Rework the function to always length-check the value we copy into the hostname buffer, and do it with memcpy rather than the more cumbersome and unnecessary snprintf. Finally, move the magic 256 value into a constant and pass it into the function which is going to get inlined anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13doc/index.txt: Reformat past releases chartDan McGee1-41/+94
This makes it a three-column deal with releases all the way back to 1.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13doc: update .gitignore, add CSS override for new tables usageDan McGee3-6/+17
* Make all docs depend on Makefile; if we change flags here we want them rebuilt. * Add explicit filenames to .gitignore so we can add our own CSS override file, and add an asciidoc-override.css resource. * Adjust a few asciidoc options when generating HTML. * Remove asciidoc-manpage.css; apparantly this doesn't exist anymore. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Update NEWS for missing 4.0 stuff and 4.0.1 changes so farDan McGee1-1/+4
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13scripts/*.sh.in: Fix signal handler error messagesLukas Fleischer2-3/+7
This includes some fixes to the messages that are displayed when a signal is caught in makepkg or repo-add: * Instead of always showing "==> ERROR: TERM signal caught. Exiting...", replace "TERM" by whatever signal is actually caught. * Fix a typo in the SIGERR error message in repo-add ("occurred" instead of "occured"). Francois already fixed this for makepkg in 1e51b81c. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13repo-add: Avoid race condition in signal handlersLukas Fleischer1-2/+8
There is a small chance that a user sends SIGINT (or any other signal that is trapped) when we're already in clean_up() which used to lead to trap_exit() being executed and the remaining code in clean_up() being skipped due to the bash signal/trap handler blocking EXIT (since its handler is already being executed, even if it's interrupted). In practice, this behaviour caused unexpected results (primarily because pressing ^C at the wrong time left a lock file behind): $ ./repo-add extra.db.tar.gz foobar ==> Extracting database to a temporary location... ^C ==> ERROR: Aborted by user! Exiting... $ ./repo-add extra.db.tar.gz foobar ==> Extracting database to a temporary location... ==> ERROR: File 'foobar' not found. ==> No packages modified, nothing to do. ^C ==> ERROR: Aborted by user! Exiting... $ ./repo-add extra.db.tar.gz foobar ==> ERROR: Failed to acquire lockfile: extra.db.tar.gz.lck. ==> ERROR: Held by process 18522 Fix this and reduce the chance of race conditions in signal handlers by: * Unhooking all traps in both clean_up() and trap_exit(). * Call clean_up() explicitly in trap_exit() to make sure we remove the lock file and the temporary directory even if we send SIGINT when clean_up() is already being executed but didn't reach the unhook code yet. Also, add an optional parameter to clean_up() to allow for setting an explicit exit code when we call clean_up() from trap_exit(). Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Add user-visible warning message if public keyring not foundDan McGee1-0/+3
This should help point users in the right direction if they have not initialized via pacman-key just yet. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12signing: delay gpgme_init() until latest possible momentDan McGee1-19/+27
In the default configuration, we can enter the signing code but still have nothing to do with GPGME- for example, if database signatures are optional but none are present. Delay initialization of GPGME until we know there is a signature file present or we were passed base64-encoded data. This also makes debugging with valgrind a lot easier as you don't have to deal with all the GPGME error noise because their code leaks like a sieve. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12VerbosePkgLists: format table lines in i18n-compatible wayDan McGee2-43/+49
This had the unfortunate implementation detail that depended on the strings having 1 byte == 1 column hold true. As we know, this is not at all the case once you move past the base ASCII character set. Reimplement this whole thing so it doesn't depend on format strings at all. Instead, simply calculate the max column widths, and then when displaying each row add the correct amount of padding using UTF-8 safe string length functions. Before: 名字 旧版本新版本 净变化 下载大小 libgee 0.6.2.1-1 0.60 MiB 0.10 MiB libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB folks 0.6.3.2-1 1.38 MiB 0.25 MiB After: 名字 旧版本 新版本 净变化 下载大小 libgee 0.6.2.1-1 0.60 MiB 0.10 MiB libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB folks 0.6.3.2-1 1.38 MiB 0.25 MiB Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Bump version to 4.0.0Dan McGee2-1/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Final Transifex update before 4.0Dan McGee12-998/+1182
We have a few incomplete translations, but these should be addressable before the 4.0.1 maint release that is surely not that far in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11pactest: add a better descriptionDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Add note to TRANSLATORS regarding TransifexDan McGee1-9/+8
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11pacman-key: don't escape single quote in usage messageDan McGee1-1/+1
This screws up gettext and causes the message to display always untranslated. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Document verifying source file signatures in makepkgAllan McRae1-0/+4
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Fix typo in PKGBUILD man pageAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11PKGBUILD.vim: fix epoch syntax highlightinglolilolicon1-0/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Update translations from TransifexDan McGee81-1949/+2503
In prep for the 4.0.0 release. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-10dload: unhook error buffer after transfer finishesDave Reisner1-1/+4
Similar to what we did in edd9ed6a, disconnect the relationship with our stack allocated error buffer from the curl handle. Just as an FTP connection might have some network chatter on teardown causing the progress callback to be triggered, we might also hit an error condition that causes curl to write to our (now out of scope) error buffer. I'm unable to reproduce FS#26327, but I have a suspicion that this should fix it. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-10pactree: Make error message smarter in register_syncs()Lukas Fleischer1-1/+1
Our error message used to be very unclear when the configuration file could not be found: $ ./pactree -lsr gtk error: failed to register sync DBs Instead, display an accurate message and include the file name: $ ./pactree -lsr gtk error: config file /usr/local/etc/pacman.conf could not be read Also, move the error message inside register_syncs() to allow for differentiating between different errors that might require a handler in the future. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-10pactree: Add "--config" optionLukas Fleischer1-3/+15
This allows for specifying an alternate configuration file path, similar to pacman's "--config" option. Given that there is currently no other way to tell pactree to read from another configuration file (except for patching or symlinking), this seems totally sensible - even if there are plans to refactor and/or replace the standalone configuration file parser. We do not define a short option for the sake of consistency with pacman's set of command line options. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-10makepkg: strip comments after pkgver/pkgrel when checking valueAllan McRae1-2/+2
Inline comments after pkgver or pkgrel would cause the sanity checks to fail so remove them before checking the value. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-07Format pacsort and vercmp testsuite outputAllan McRae2-4/+8
Make the output into a single block and add separators at the end so that they do not merge into each other. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-06Update NEWS for 4.0.0 releaseDan McGee1-0/+71
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-06bacman: use globbing to get local package db pathlolilolicon1-3/+11
The original code- pkg_dir="$(echo $pac_db/$pkg_name-[0-9]*)" is problematic in several ways: - $pac_db and $pkg_name should be quoted, obviously. - It assumes pkgver always starts with an integer, while in fact it just can't contain ':' and '-'. Counterexample: the code breaks on lshw B.02.15-1. - It assumes there are no more than one directory matching the pattern. While this should be the case if everything works perfectly, it certainly relies on external conditions. Counterexample: if the local db contains two packages named foo and foo-3g, even if everything else is perfect, the code will match two directories. Don't make assumptions, use what is known. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-10-06bacman: add tar.Z package creation supportlolilolicon1-9/+3
bacman should support whatever makepkg does as PKGEXT. Also remove obsolete $EXT variable. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-10-06bacman: small code cleanuplolilolicon1-10/+11
This includes: - Quoting fixes. - Drop deprecated mktemp option -p. - Set extglob nullglob shell options at the top. - Use extended globbing instead of regex to match %HEADER% in pacman db. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-10-06bacman: bashify using [[ ]] and (( ))lolilolicon1-22/+22
Another style change. The [[ expression ]] form is particularly cleaner, safer and more powerful than the [ expression ] form. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-10-06bacman: indent code using TABlolilolicon1-140/+138
As every piece of code in the whole project uses TAB as indentation character, bacman shouldn't be an exception. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-10-05Enable CheckSpace by default in default config fileDan McGee1-3/+3
This will have to be picked up downstream of course, but addresses FS#25684 now that this is a lot faster in 4.0 than it was in the original 3.5 implementation. Also make curl the first XferCommand listed, as we are moving away from any other download program at this point. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05Update translation message catalogs in prep for 4.0 releaseDan McGee3-18/+24
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05Add a top-level 'update-po' make targetDan McGee1-0/+5
This makes the maintainer's life (read: my life) a lot easier when updating translation files to push to Transifex. Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-18 23:26:56 +0000