summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-04-11Fix for trans001.py (FS#9088)Nagy Gabor5-96/+112
From now on _alpm_db_find_fileconflicts() works with upgrade and remove target lists (like checkdeps), which makes it transaction independent (we still need a trans param because of the progressbar). This is a small step towards the universal transaction. So we call this function directly from sync.c before commiting the remove transaction. This is much safer, but we can get false fileconflict error alarms in some tricky cases ("symlinks puzzle" etc). The patch on find_fileconflict looks complex, but it is mainly an "indent-patch", the new code-part can be found after the /* check remove list ... */ comment, and I modified something around the "file has changed hand" case (see comment modifications in the code). Unfortunately sync.c became more ugly, because we have to create 2 parallel internal transactions: to avoid duplicated work, upgrade transaction is used to load package data (filelists). This problem will disappear, when we finally get rid of internal transactions. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Free *data list when user removes unresolvable packagesNagy Gabor1-7/+9
Resolvedeps reports error when it cannot resolve some dependencies, puts them into the *data list, and set pm_errno. If user removes the unresolvable packages from the target list, we have no error anymore, so from now on we free *data list (we eliminate a memleak) and unset pm_errno. (Additionally I removed two needless lines from the code, unresolvable list is always freed in cleanup.) Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Print warning in _alpm_resolvedep() if a satisfier package is ignored ↵Nagy Gabor1-0/+4
without QUESTION After commit f57f8d33862050acc8d131710c100ba47877e675 pacman *silently* ignores packages from IgnorePkg/IgnoreGroup during dependency resolving, if prompt == 0. This behavior is changed to "give warning + ignore". (Otherwise the user is not informed about the fact that the package resolving was blocked by ignorepkg.) Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11New error type: PM_ERR_PKG_IGNOREDNagy Gabor5-5/+18
This patch fixes FS#12059. Now sync_addtarget can return with PM_ERR_PKG_IGNORED, which indicates that although the requested package was found it is in ignorepkg, so alpm could not add it to the transaction. So the front-end can decide what to do. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Merge branch 'xav/repo-add'Dan McGee8-206/+489
2009-04-11makepkg: fix double check on same pathDan McGee1-1/+1
Commit 142225fd typo-ed this one, as it should look like the rest of the checks similar to it. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11makepkg: Fix integrity check when files are missing.Loui Chang1-8/+11
The index in the for loop wasn't being incremented, so if the first file wasn't found, the second file would be compared to the first checksum, rather than the second. Signed-off-by: Loui Chang <louipc.ist@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Add detail documentation for alpm_db_update()Sebastian Nowicki1-0/+31
This adds alpm_db_update() to the alpm_databases Doxygen group. The function is described in more detail and a code example is given. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Small cleanups to index.txtDan McGee1-7/+7
Simplify the gitweb links. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11doc: move files around for consistencyDan McGee4-2/+7
Move some of our documentation files, even though they aren't manpages, to the doc/ directory. This allows the new 'html' make target to manage them. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11doc: add 'html' target to Makefile.amDan McGee1-8/+39
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11doc: fix repo-add manpageDan McGee1-6/+0
Now the comment was showing up in the generated manpage and HTML documentation. Just kill it as asciidoc keeps screwing us over. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Fix asciidoc formatting warnings and issuesDan McGee3-14/+14
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Add the pacman home page to the doc directoryDan McGee2-0/+195
Also ignore .html files in doc/. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-05Fix doc building for asciidoc >= 8.4.1Allan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-05fixed typos and alignment problem in Turkish translationSamed Beyribey2-32/+32
Signed-off-by: Samed Beyribey <ras0ir@eventualis.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-05Merge commit 'allan/working'Dan McGee2-32/+68
2009-04-05Document --debugNagy Gabor2-1/+6
After some irc/forum experiences, I decided to document this option. However, I left the debug-level undocumented (--debug=2). Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-03-30makepkg: run tidy_install with no package() functionAllan McRae1-0/+1
After the splitpkg implementation, the tidy_install function was not being called in PKGBUILDs with only the build() function. Signed-off-by: Allan McRae <allan@archlinux.org>
2009-03-29makepkg: do not bail on failure to install built packageAllan McRae1-2/+8
Fixes FS#13417. Do no exit makepkg on a failure to install the built package(s). This allows clean-up to still occur. Signed-off-by: Allan McRae <allan@archlinux.org>
2009-03-26makepkg: adjust log clean-up for new filenamesAllan McRae1-1/+8
The log files now have -build or -package at the end and there are separate log files for each *_package() function. Alter clean_up() to deal with this. Also, move glob outside quotes so this actually works. Signed-off-by: Allan McRae <allan@archlinux.org>
2009-03-25makepkg: adjust install_package for split packagesAllan McRae1-3/+14
Install all created packages when using the install option with package splitting. Signed-off-by: Allan McRae <allan@archlinux.org>
2009-03-16Refactor testing for color message outputAllan McRae1-5/+11
Signed-off-by: Allan McRae <allan@archlinux.org>
2009-03-16makepkg: add pkgbase variableAllan McRae2-23/+28
The pkgbase variable is added to improve informational output and source package naming when using split packages. Defaults to ${pkgname[0]} if not set. Also: - move splitpkg detection to after pkgname presence is verified - add "cd" line to package_foo() functions in splitpkg proto Signed-off-by: Allan McRae <allan@archlinux.org>
2009-03-15repo-add : rename gstmpdir to tmpdirXavier Chantry1-9/+9
What does gstmpdir mean? Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-03-15repo-add : don't change the modification time on depends and descXavier Chantry1-5/+2
The modification time on depends and desc file were changed to match the modification time of the package file. I don't see why and we are actualling losing information here. If we want to know the date of the package file, we can just look inside the depends file. If we want to know when the entry was created, we should not alter the modification time of depends and desc. Besides, this had the non-obvious and undocumented side effect that the depends file was always created, even if it was empty. And pacman actually does require that. So I added a "touch depends" to always create the file. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-03-15repo-add : new locking systemXavier Chantry1-13/+45
Weird things could happen if several repo-add were run concurrently on the same database. The introduced locking system will prevent this to happen. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-03-15repo-add : fix package variables declarationXavier Chantry1-8/+4
- arch was missing - backup is not used by repo-add. However makepkg still needs to put it in PKGINFO because pacman uses it - startdir is no longer used after the new delta implementation - the declaration of group, depend, backup, etc is not needed because these variables are always declared before being used : declare $var="$val" case "$var" in group) _groups="$_groups$group\n" ;; - reorder the variables declaration to follow the same order than they are written to the depends and desc file, for making future checks easier Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-03-15repo-add : rewrite delta supportXavier Chantry1-5/+97
Use the correct database format Use xdelta3 to get the source and destination files from the delta itself Allow delta files to be added with repo-add just like package files. delta files can also be removed with repo-remove. This is simply done by looking for a .delta extension in the arguments, and calling the appropriate db_write_delta or db_remove_delta functions. Example usage: repo-add repo/test.db.tar.gz repo/libx11-1.1.99.2-2-x86_64.pkg.tar.gz repo-add repo/test.db.tar.gz repo/libx11-1.1.5-2_to_1.1.99.2-2-x86_64.delta repo-remove repo/test.db.tar.gz libx11-1.1.5-2_to_1.1.99.2-2-x86_64.delta Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-03-15repo-add : drop delta support to rewrite it from scratchXavier Chantry1-59/+0
The current implementation has several problems : Wrong database format All the info is taken from the filename, which is a bit ugly It looks for .delta files in the current directory when adding a package, which is not very flexible Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-03-15repo-add.sh.in : repo-remove improvementsXavier Chantry1-12/+38
* report when a package entry to be removed is not found * backup and restore eventual "deltas" files * slight optimization when looking for an entry : only look at the entries starting with $pkgname Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-03-15repo-add cleanupXavier Chantry1-53/+65
Refactor the main loop, which was difficult to read. Use case instead of if when appropriate. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-03-15Add pkgdelta script to create deltas.Xavier Chantry3-0/+169
This should obsolete the delta support in makepkg. Having a separate script should be more flexible. Example usage: $ pkgdelta repo/tzdata-2009a-1-x86_64.pkg.tar.gz repo/tzdata-2009b-1-x86_64.pkg.tar.gz ==> Generating delta from version 2009a-1 to version 2009b-1 ==> Generated delta : 'repo/tzdata-2009a-1_to_2009b-1-x86_64.delta' Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-03-15Fix several issues with xdeltaXavier Chantry4-65/+83
1) The changes to sync.c look big but there are mostly caused by the indentation. Fix a bug where download_size == 0 because the packages and deltas are already in the cache, but we still need to build the deltas list and apply the deltas to create the final package. 2) Fix the gzip / md5sum issue by switching to xdelta3, disabling external recompression and using gzip -n in pacman, and disable bsdtar compression and using gzip -n in makepkg. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-03-15be_files.c : use %jd instead of %ju for intmax_tXavier Chantry1-3/+3
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-03-15Revert "popen does NOT require /bin/sh in a subchroot"Xavier Chantry1-7/+0
This reverts commit 9558639d8009483fbf422b138d020745986f82f1. This change was wrong, popen does require /bin/sh in a subchroot. 1) pacman -S lilo -r root Notice no error 2) rm root/bin/sh ; pacman -S lilo -r root Notice an error : error: scriptlet failed to execute correctly Actually, we already get an explicit error here, when popen is run, so there is no need to check for bin/sh explicitely. Besides this check was problematic in some cases. For example, bash itself has a scriptlet, but only post_install and post_upgrade, no pre_install and pre_upgrade. However, since bash has a scriptlet, runscriptlet will also be called before bash is installed. It won't do anything since the scriptlet has no pre_install function. But if we keep the check, we will still get "error : no /bin/sh". Conflicts: lib/libalpm/trans.c Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-03-15runscriptlet : Flush open fds before fork() to avoid cloning buffersXavier Chantry1-0/+3
This is a bug I noticed 2 years ago : http://www.nabble.com/Re%3A-logging-output-crazy-to11437357.html#a11479679 I thought I fixed it with 57d77eab32c01cd7572a11f76480a3724d09c029 But the bug was still here. Reading man fork, this part caught my attention: * The child inherits copies of the parent's set of open file descriptors. Each file descriptor in the child refers to the same open file description (see open(2)) as the corresponding file descriptor in the parent. This means that the two descriptors share open file status flags, current file offset, and signal-driven I/O attributes (see the description of F_SETOWN and F_SETSIG in fcntl(2)). Since the open file descriptors are inherited, it is probably a good idea to flush them before forking. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-03-15Only check checksums if there is a source fileAllan McRae1-0/+2
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-03-15contrib/pacscripts - print install scripts from a packageAllan McRae3-0/+136
Prints the install script from a given package file or from a package in the pacman repo. Original-work-by: Giulio "giulivo" Fidente <giulivo.navigante@gmail.com> Improvements-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-28Update checks for python in configureDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-28Merge branch 'maint'Dan McGee4-0/+2134
2009-02-28makepkg : remove xdelta supportXavier Chantry3-75/+3
The pkgdelta script can be used instead. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-28libalpm: remove from_md5 and to_md5 from pmdelta_tXavier Chantry4-54/+20
The from_md5 and to_md5 fields were a nice extra safety, which would avoid trying to apply deltas on corrupted package files. However, they are not strictly necessary, since xdelta should be able to detect that on its own. The main problem is that it is impossible to compute these informations from the delta only. So repo-add would not be able to compute the delta entry based on just the delta file. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-28repo-add: print warning if same version already existsXavier Chantry1-3/+7
Simple fix for FS#13414. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-24Add new Kazakh translationBaurzhan Muftakhidinov4-0/+2134
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-23Merge branch 'maint'Dan McGee1-2/+0
2009-02-23Update pactest to use hashlibDan McGee1-3/+3
The md5 module is deprecated in favor of hashlib. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-23Don't prompt the user for unignore of IgnorePkg/IgnoreGroup packagesBryan Ischo9-21/+209
Don't prompt the user for unignore of IgnorePkg/IgnoreGroup packages, except for packages explicitly listed for sync by the user. This eliminates many unnecessary prompts when IgnorePkg/IgnoreGroup is used. Signed-off-by: Bryan Ischo <bryan@ischo.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-23Enabled new interactive prompt and updated some testsBryan Ischo8-13/+44
Enabled a new prompt to ask the user if they'd like to remove unresolvable packages from the transaction rather than failing it. Many pactest tests that used to fail now return success codes, because pacman now issues a prompt allowing the user to cancel rather than failing many transactions, and the pactest scripts always choose to cancel with no error rather than failing. The only net effect is that the return status of pacman is now 0 in cases where it used to be nonzero. Signed-off-by: Bryan Ischo <bryan@ischo.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-23makepkg: fix updating pkgrel with pkgver in SCM packagesAllan McRae1-2/+0
Commit 1e656c0a introduced the changing of pkgrel to 1 when the pkgver was updated in SCM PKGBUILDs. However, the output in the "Making package:" was wrong. Attempting to fix that created another bug (FS#13416). Interestingly, pkgver was only ever being updated in the fakeroot stage which caused this problem. Now both pkgver and pkgrel are updated after the first devel_check and devel_update. Enjoy the really long explaination for a two line fix... Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-15 06:23:29 +0000