summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-07-30Fix whitespace in pacsort.c and pactree.cJason St. John2-20/+20
Replace spaces with tabs. Remove extra spaces. Signed-off-by: Jason St. John <jstjohn@purdue.edu> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: provide an --output option to show any .pac* filesJonathan Frazier1-1/+10
This is an option to just echo's the pacnews/pacsaves instead of merging or removing them. This can be used to check the config status such as in a cron job without modifying the system. Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: make pacmandb search the default type.Jonathan Frazier1-2/+2
Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: improve speed, accuracy finding active configs using pacmandbJonathan Frazier1-6/+46
This is a new search type, using -p or --pacmandb options. It reads config file locations directly from the local pacman db. It will find active configs anywhere they are defined in installed packages. It is not dependant on outside configs such as updatedb.conf or scanning a large set of directories for find. This will find more pacnews than find when searching with the current default of /etc, and it is faster than both find and updatedb when searching the entire fs. When run directly after an update, the local db is more likely to be cached than all files in /etc or / as other methods read. This will increase performance further post upgrade. After a package is removed and a pacsave is created, this method will not find these pacsaves until the base config is added to the local db again. These files have no influence in a working system and only take up a few blocks of disk space. Active configs need to be dealt with immediately to keep a system working. pacsaves related to removed configs can remain for weeks or months without problems. I would recommend occasionally running other methods such as --locate to remove them. Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: rework search type handling, add --find optionJonathan Frazier1-11/+22
Change cmd tests to if (( USE_FIND ))... as it is cleaner. All search cmds have an option and a variable initialized to zero. The active option should be set to 1. Add a switch to exclude multiple search options. set the default when all are equal to zero. Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: add --nocolor option for the terminally challenged.Jonathan Frazier1-2/+5
Allow colors to be disabled for use on broken/serial terminals. Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: allow multiple separated optionsJonathan Frazier1-3/+4
loop over arguments, this will allow adding options such as --nocolor Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: clean up and reword --helpJonathan Frazier1-6/+16
Clean up and reword --help get rid of all the echos to make it easier to read in source. Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30pacdiff: Search and give warnings for older pacsave.[0-9]* filesJonathan Frazier1-2/+11
Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Corrected return codes for Sg flagAshley Whetter1-1/+10
Non-zero is now returned if a group is searched for that doesn't exist. Fixes FS#36097. Signed-off-by: Ashley Whetter <awhetter.2011@my.bristol.ac.uk> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Fix typoAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22clarified descriptions for pactree -r (--help)Zulker Nayeen Nahiyan1-1/+1
Signed-off-by: Zulker Nayeen Nahiyan <nahiyan02@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Clarify inter-conflicts messageAllan McRae1-1/+1
Use a clear message rather than using a made up word to describe what we are doing. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Install makedepends and checkdepends togetherAshley Whetter1-3/+3
Fixes FS#31557 Signed-off-by: Ashley Whetter <awhetter.2011@my.bristol.ac.uk> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22pacdiff: Add quit to found pacnew optionsJonathan Frazier1-2/+3
Signed-off-by: Jonathan Frazier <eyeswide@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Carry a copy of gpgme.m4Allan McRae2-1/+240
On systems without gpgme installed, autoreconf will fail with an unrelated error message unless the gpgme.m4 file is present. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Remove autoclean.shAllan McRae1-22/+0
Use 'git clean' instead. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Patch ltmain on autoreconfAllan McRae3-2/+37
We used to carry a patched version of ltmain in our repos to fix libtools issues with -Wl,-as-needed. Now that ltmain is "generated" by autoreconf, we manually patch it afterwards. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Use autoreconf in autogen.shAllan McRae2-5/+2
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Update gitignore files for use with autoreconfAllan McRae6-3/+31
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Remove autotools filesAllan McRae28-28245/+0
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22be_sync: avoid crashing on files in the root of a DBDave Reisner1-0/+8
If a sync DB is malformed and contains entries in the root of the archive, load_pkg_for_entry will leave the 'filename' variable empty, leading to a crash in the ensuing strcmp() calls which determine the DB fragment being examined. While this isn't a read error, this should be reported to the user so that it can be addressed by the creator of the DB. As seen: https://bbs.archlinux.org/viewtopic.php?pid=1297766 Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2013-07-22Hide unused parameter warnings when building without libcurlAllan McRae1-0/+3
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-22Add missing headerAllan McRae1-0/+1
Exposed when building with --without-libcurl Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-05use full path when checking for mountpointsAndrew Gregory1-2/+13
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-05do not check error from close(2)Dave Reisner7-29/+25
On operating systems we support, the behavior is always such that the kernel will do the right thing as far as invalidating the file descriptor, regardless of the eventual return value. Therefore, potentially looping and calling close multiple times is wrong. At best, we call close again on an invalid FD and throw a spurious EBADF error. At worst, we might close an FD which doesn't belong to us when a multi-threaded application opens its own file descriptor between iterations of the loop. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-05Consolidate and improve table implementationsSimon Gomizelj1-115/+122
Implement both the VerbosePkgList and the summary message with the same table. Improve VerbosePkgList by caching attributes and cell's lengths instead of recaculating them. Right align every cell that containing a file size in both the VerbosePkgList and the summary. Simplify the printf statements and the alignment application. Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-26update to automake 1.14Allan McRae7-519/+1259
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-26query_fileowner: resolve trailing . or .. in pathsAndrew Gregory1-1/+1
The full path needs to resolved any time it ends with "." or "..", not just when those are the entire path. This allows strange-but-valid paths such as: "/home/." to be queried. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-26query_fileowner: remove useless path variableAndrew Gregory1-27/+3
We no longer need it for resolving package files and using it to resolve root is unnecessary as alpm does that for us. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-26query_group: allow package filtersAndrew Gregory1-41/+47
Relocated query_group() to allow calling filter(). Fixes FS#19716 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-26skip unknown repo names for pacman -SlAndrew Gregory1-3/+3
Brings pacman -Sl behavior in line with other listing operations. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-26Enable inverted patterns in NoExtract and NoUpgrade.Patrick Steinhardt4-4/+42
It is now possible to invert patterns in NoExtract and NoUpgrade. This feature allows users to whitelist certain files that were previously blacklisted by another entry. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-26deps.c: check for indirect deps when orderingAndrew Gregory3-20/+127
On upgrades, indirect dependencies were not being detected if there was a dependency in between them that was not part of the transaction. For example, with the dependency chain: pkg1 -> pkg2 -> pkg3, if pkg1 and pkg3 are being upgraded but not pkg2 pacman would not order pkg1 and pkg3 properly. This was particularly problematic when replacements were involved because the replaced package(s) would be removed at the start of the transaction. If an install script required the replacer and lacked a direct dependency, it could fail. Fixes FS#32764. Partially fixes FS#23011. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-26Make --unrequired filter packages that are optdep as wellOlivier Brunel3-7/+15
Specify it twice to only filter direct dependencies. Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-26Install unchanged backup files to get correct timestamps.Patrick Steinhardt1-5/+7
Fixes FS#35515. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-26Merge branch 'maint'Allan McRae1-1/+1
2013-06-23Respect paths with spaces on --installAndrea Scarpino1-1/+1
makepkg --install doesn't quote the absolute path, so if the path contains spaces pacman -U fails. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-18Merge branch 'maint'Allan McRae94-737/+898
2013-06-184.1.2 release preparationAllan McRae3-2/+17
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-18contrib: update .gitignoreAllan McRae1-0/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-18Pull translation updatesAllan McRae87-720/+864
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-18pacscripts: Update for pacman changesKarol Blazewicz1-2/+2
Changes to pacman mean that -Sp can be called without root permissions and '-d' needs passed twice to completely ignore dependencies. Signed-off-by: Karol Błażewicz <karol.blazewicz at gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-18pacscripts: don't read the whole package from cacheKarol Blazewicz1-1/+2
'-q' means "Exit as soon as each specified pattern or filename has been matched." There is no reason to keep reading the whole package from the cache when the install script has already been printed to stdout. Signed-off-by: Karol Błażewicz <karol.blazewicz at gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-18checkupdates: Consistency in environmental variable nameAllan McRae1-8/+8
Use CHECKUPDATES_DB rather than CHECKUPDATE_DB for consistency with the script name. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-16contrib/checkupdates: fix typoAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-16makepkg: fix typo for distcc testAllan McRae1-1/+1
Introduced in commit 9dd42dc0. Fixes FS#35741. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-06Correct INODECMD for BSD and DarwinAllan McRae1-2/+2
Fixes FS#35469. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-06paccache: make --help output look nice on 80 width terminalAllan McRae1-14/+17
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-06-06repo-add; add option to remove existing package files from diskPhillip Smith2-0/+16
When maintaining a custom repo, often it is undesirable to retain older versions of packages. This patch adds the --remove option to remove the current package file and it's signature from disk before adding the new one to the database. Documentation is also updated. This is an optional flag and default behaviour (leaving ondisk files alone) is not changed. Signed-off-by: Phillip Smith <fukawi2@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>