summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-01-18Update copyright on changed files since beginning of yearDan McGee11-14/+14
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18util.c, rmrf(): only create string when neededOlivier Brunel2-6/+6
The entry's name is only used when not "." or ".." so only print the string then. Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Fix missing [removal] outputAllan McRae1-1/+5
Currently, a transaction is considered to be purely package removal until the first package install is found. This resulted in the removed packages at the start of a combined upgrade/removal transaction not getting the "[removal]" output. Fixes FS#27981. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Improve exit statuses and error messages in pacman-keycanyonknight1-23/+95
Return codes from gpg commands are currently lost. This adds the functionality of taking non-zero exit statuses from gpg. This includes error reporting for all gpg commands that are run individually, run in a loop, and run through a pipe. Includes the check_keyids_exist function which verifies a key exists locally prior to attempted local manipulation of the key. If a gpg command has a non-zero status, pacman-key will now exit with a non-zero status. It will print a gettext error message of gpg's failure. Signed-off-by: canyonknight <canyonknight@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Turn gpg commands into functions in pacman-keycanyonknight1-16/+58
Adds functions for every gpg command. By pulling out the gpg commands from the "program start" section, additional commands can be run before or after a specific gpg command without adding additional clutter to the function call section. Adds an explicit exit status of 0 to prevent arithmetic expansions from returning non-zero, thereby falsely causing pacman-key to have a non-zero exit status. This change creates the framework for additional error messages and better exit statuses being added to every pacman-key gpg call. Signed-off-by: canyonknight <canyonknight@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18repo-add: clean up help messagesDan McGee1-6/+14
Use consistent blank lines across all commands, get rid of the translated double newlines which only serve to confuse translators, and fix -h/--help for that extra special third command this script offers. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Fix broken output when asking question and stdin is pipedOlivier Brunel1-0/+6
When asking question and stdin is piped, the response does not get printed out, resulting in a missing \n and broken output (FS#27909); printing the response fixes it. Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18fetch_url: look for files in cache before downloadingDave Reisner1-32/+60
We lost this logic somewhere between the libfetch and libcurl transition, as it existed in the internal downloader, but was pulled back only into the sync workflow. Add a helper function that will let us check for existance in the filecache prior to calling the downloader. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Use isdigit() rather than character range comparisonsDan McGee1-1/+1
This is safer and guaranteed to work with even exotic character sets. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Remove unused strtoupper() functionDan McGee2-14/+0
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Don't remove unknown files in cache cleaning codeDan McGee2-23/+11
This removes the hack I added to skip '*.sig' files earlier since there are other files that also fall into the same bucket- source packages from `makepkg --source`, delta files, etc. Rather than prompting for each and every one, simply skip them. Doing '-Scc' rather than '-Sc' will delete these files if that is really what you want to do. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-12doc/vercmp: add note about pkgrel handlingDan McGee1-2/+7
This comes from the Doxygen function documentation. Also, fix two rather silly misspellings. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-12Use fileno() in isatty() callDan McGee1-1/+1
This was our only use of the function that had a hardcoded file descriptor. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-08makepkg: abort on missing download agentAllan McRae1-1/+2
makepkg would not abort on a missing download agent due to the output variable being declared local on the same line as the function call in the assignment. That would result in strange output such as: ==> Retrieving Sources... ==> ERROR: There is no agent set up to handle foo URLs. Check /etc/makepkg.conf. Aborting... -> Downloading foobaz... /home/arch/code/pacman/scripts/makepkg: line 401: foo://foobaz: No such file or directory ==> ERROR: Failure while downloading foobaz Aborting... Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-08makepkg: fix missing source file detectionAllan McRae1-1/+2
Declaring the variable as local on the same line as the assignment results in result of the assignment being returned rather than the result of the function on the righthand side of the assignment. Declaring the variable as local on a separate line means the result of the function on the r.h.s. is returned and our error function will be invoked if necessary (although it is practically impossible to ever trigger it...). Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-08makepkg: simplify source archive generationAllan McRae1-5/+3
Simplify the source tarball generation by unifying the handling of local and remote files. This also allows local files to be found in $SRCDEST (FS#26580) and makepkg will abort on missing local source files (only possible to trigger in combination with --skipinteg). Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-08Fix zsh completion for *.pkg.tarcanyonknight1-4/+4
Signed-off-by: canyonknight <canyonknight@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-08Fix bash completion for *.pkg.tarcanyonknight1-2/+2
Signed-off-by: canyonknight <canyonknight@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-05Update translations from TransifexDan McGee32-231/+387
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-05Update scripts translation catalogDan McGee1-2/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-05Remove useless logger messageDan McGee1-1/+0
We don't need two log messages back-to-back about the same thing here. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-05Search for PGP subkeys in a keyserver-acceptable wayDan McGee1-5/+21
PGP keyservers are pieces of sh** when it comes to searching for subkeys, and only allow it if you submit an 8-character fingerprint rather than the recommended and less chance of collision 16-character fingerprint. Add a second remote lookup for the 8-character version of a key ID if we don't find anything the first time we look up the key. This fixes FS#27612 and the deficiency has been sent upstream to the GnuPG users mailing list as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-02add new pactest for syncfirst with recursive depsDave Reisner2-0/+130
Add 1 failing for the -Su case, and the same case using -S (and passing). This is based on a real (current) issue of upgrading staging chroots with the new pacman in staging for a libarchive build, and a new toolchain in testing. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-02Prevent rebuild of man pages when using release tarballsAllan McRae1-3/+3
Commit 43cad9c8 made the building of all docs depend on the Makefile. However, the Makefile is generated after running ./configure so is always newer than any pregenerated docs. This means that people building from released pacman tarballs are forced to rebuild the docs (and thus have asciidoc installed). That defeats the purpose of prebuilding the documentation. Have the documentatin depends on Makefile.am instead as this is probably what was intended. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-29Fix bogus string cast in search debug messageDan McGee1-3/+3
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-23pacman-key: Add missing quotesTimothy Redaelli1-3/+3
Signed-off-by: Timothy Redaelli <timothy.redaelli@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-23Allow comments after repo section header in pacman.confAllan McRae1-5/+7
Pacman assumes that the final character of a line specifing a repo in pacman.conf is a "]". But it did not clean whitespace from the line after removing any comments. So lines like: [allanbrokeit] # could break system caused pacman not to recognize the repo. Adjust config parsing to strip comments before trimming whitespace from the end of the string. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-12contrib/paccache: silence possible output from cdDave Reisner1-1/+1
If CDPATH is set, this could possibly write to stdout. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-12pacsysclean: Add new contrib scriptEric Bélanger3-1/+55
pacsysclean sort installed packages by decreasing installed size. It's useful for finding large unused package when doing system clean-up. This script is an improved version of other similar scripts posted on the forums. Thanks goes to Dan for fixing and improving my original script. Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05Use correct size in memsetDan McGee1-1/+1
We were using the size of a pointer, not the size of the whole archive_read_buffer struct. Thanks to Clang/LLVM 3.0 and Allan/Dave in IRC for finding this one. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05repo-add: enforce maximum .sig file sizeDan McGee1-7/+12
This prevents user error in adding a file generated via `gpg --sign` rather than `--detach-sign`, for example. The same 16KiB limit is used we use in our pacman download code. The section is moved above the checksum generation to avoid presenting info messages to the user if the signature isn't valid. Addresses a shortcoming pointed out in FS#27453. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05Enforce signature download size limit on -U <url> operationsDan McGee1-0/+3
We had a 16 KiB limit on database signatures, we should do the same here too to have a slight sanity check, even if we can't do so for the package itself yet. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05contrib/paclist: Add "--help" command line parameterLukas Fleischer1-1/+1
Be consistent with all other contrib scripts and support the "--help" command line switch. Fixes FS#27258. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30makepkg.5: fix typo s/tar,bz2/tar.bz2/Dave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30makepkg: avoid using comm for diff'ing package listsDave Reisner1-7/+9
Whereas comm will check inputs to see if they're sorted (and warn when they aren't), grep doesn't even care about ordering. In this particular instance -- neither do we. We're only interested that the two lists are equivalent. Fixes FS#26580. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30_alpm_ldconfig: return value from _alpm_run_chrootDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30Add two new pactests for pacman upgrade behaviorDan McGee2-0/+65
Both currently marked as failing. * sync303.py encapsulates the broken behavior reported in FS#27214. * sync304.py shows how packages depending on a specific version of a package in SyncFirst can cause breakage of the dependency resolver. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30Miscellaneous post-4.0.1 updatesDan McGee3-12/+13
Some late-arriving translation updates and add the correct dates to the index.txt releases table. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20Final changes before 4.0.1 releaseDan McGee3-7/+10
* Add last-minute changes to NEWS * Don't treat '_' or '_n' special in scripts when finding translatable strings; this breaks with one use of `read` and a dummy _ variable Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20makepkg: trim trailing space from whitespace sensitive varsDave Reisner1-3/+3
This applies to pkgver, pkgrel, and epoch and ensures that any trailing whitespace outside of the context of the variable declaration itself is properly trimmed. The Bash parser will ignore this, and so should we. We don't need to worry about leading space because it would force a syntax error, or fail validation. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Update translations from TransifexDan McGee29-310/+356
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15makepkg.conf: disable motd printing for rsync DLAGENTDave Reisner1-1/+1
Fixes FS#26806. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Allow sync_prepare to work in certain cases without sync databasesDan McGee2-10/+19
When doing a bare -U operation on a local package that doesn't pull in any dependencies from the sync databases, we can get away with missing database files. This makes the check conditional on no sync targets found in the target list. This is not the prettiest code here so we have a bit of hackish behavior required to straighten both the behavior and the nonsensical error message out. Addresses FS#26899. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Update documentation regarding signature extensionsAllan McRae1-1/+1
Commit e7b56f48 allowed makepkg to handle pgp signatures with the .sign extension. Update the man page to reflect this. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-13Update translations from TransifexDan McGee81-952/+1316
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-13Updates in preparation for 4.0.1 releaseDan McGee5-10/+29
Bump the version, update the translation template files, and fill in NEWS with relevant commits and changes since 4.0.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-10makepkg: check for value before using eval'd varDave Reisner1-1/+1
This prevent bsdtar from exploding when install= or changelog= are present without a value. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-07makepkg: handle pgp signatures with .sign extensionAllan McRae1-2/+2
Detached sgnature files with extension .sign are accepted by gnupg. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-03Fix download progress rounding edge caseDan McGee1-2/+5
Allan's original message: Occasionally when the download rate showed 100.0 the output got messed up. This was caused by the rounding of a number between 99.95 and 100. Adjust the threshold to avoid this rounding issue. Dan: make this fix, but also show values between 0 and 9.995 with two decimal places since we have the room. Original-fix-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-01Fix thinko in _alpm_strip_newlineDan McGee1-1/+1
The point of this early compare to NULL byte check was so we could bail early and skip the strcmp() call. Given we weren't doing the check right, this never exited early. Fix it to work as intended. Noticed-by: Pepe Juárez <trulustapa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>