summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-01-13repo-add: fix misguided conditional correctionDan McGee1-6/+8
I tried to move things around here when testing and did a bit too much; the warning message always showed regardless of delta inclusion in the call. Fix it so we only warn if we have a filename, but the file couldn't be located. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-12Merge branch 'maint'Dan McGee1-2/+2
Conflicts: lib/libalpm/be_files.c
2011-01-12Fix double read issue in maint releasesDan McGee1-8/+10
This is essentially a backport/cherry-pick of commit 33240e87b99e from master, but has to be done by hand because the DB format has diverged. Read more in the commit message used there, which follows. Due to the way we funk around with package data loading, we had a condition where the filelist got doubled up because it was loaded twice. Packages are originally loaded with INFRQ_BASE. In an upgrade/sync, the package is checked for file conflicts next, leaving us in an "INFRQ_BASE | INFRQ_FILES" state. Later, when committing a single package, we have an explicit call to _alpm_local_db_read() with INFRQ_ALL as the level. Because the package's level did not match this, we skipped over our previous "does the incoming level match where I'm at" shortcut, and continued to load things again, because of a lack of fine-grained checking for each of DESC, FILES, and INSTALL. The end result is we loaded the filelist twice, causing our remove logic to iterate twice over the installed files, spewing a bunch of "cannot find file X" messages. Fix the problem by doing a bit more bitmasking logic throughout the load method, and also fix the sanity check at the beginning of the function- this should *only* be used for local packages as opposed to the "not a package" check that was there before. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-12pactest: build the filelist using a set()Dan McGee1-6/+4
This will prevent duplicates, which we had plenty of once I made a few tests that had a list of files greater than the normal two. The previous logic was not working quite right. Signed-off-by: Dan McGee <dan@archlinux.org> (cherry picked from commit 0d4dd09993971924d379be4d0944d72f4c77b021)
2011-01-11Make debug config messages consistent in capitalizationDan McGee1-2/+2
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11Back out anticipated epoch changesDan McGee1-4/+0
After all the debate as to what to do on maint, we are going to end up just incorporating epoch into the version string, so we don't need this separate field at all. Revert commit 5c8083baa4a and also kill the force flag we were recording here as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11Merge branch 'diskspace-fixes'Dan McGee2-8/+18
2011-01-11Merge branch 'fix-double-load'Dan McGee5-21/+59
2011-01-11Merge branch 'repo-add-improvements'Dan McGee2-14/+32
2011-01-11Fix double filelist issue when upgrading a packageDan McGee2-15/+25
Due to the way we funk around with package data loading, we had a condition where the filelist got doubled up because it was loaded twice. Packages are originally loaded with INFRQ_BASE. In an upgrade/sync, the package is checked for file conflicts next, leaving us in an "INFRQ_BASE | INFRQ_FILES" state. Later, when committing a single package, we have an explicit call to _alpm_local_db_read() with INFRQ_ALL as the level. Because the package's level did not match this, we skipped over our previous "does the incoming level match where I'm at" shortcut, and continued to load things again, because of a lack of fine-grained checking for each of DESC, FILES, and INSTALL. The end result is we loaded the filelist twice, causing our remove logic to iterate twice over the installed files, spewing a bunch of "cannot find file X" messages. Fix the problem by doing a bit more bitmasking logic throughout the load method, and also fix the sanity check at the beginning of the function- this should *only* be used for local packages as opposed to the "not a package" check that was there before. A debug log message was added to upgraderemove as well to match the one already in the normal remove codepath. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11Call archive_read_data_skip() while checking diskspaceDan McGee1-0/+7
libarchive eventually calls it anyway, but backtraces make a lot more sense if we call it, as well as matching our precedent from alpm_pkg_load(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11Add error message stating which partition is fullDan McGee1-7/+10
This is helpful anyway to the user, and should also be helpful to us if we see problems cropping up in the check during development. Also add a missing ->used = 0 initialization in the code path less taken. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11Unify two free diskspace error messagesDan McGee1-1/+1
Although they won't be the same in the gettext catalog because of the '\n' we should still use the same text. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11Add a progressbar for package integrity checkingDan McGee3-4/+18
This can take a while too, and it is really easy to add the necessary callback stuff for adding a progressbar. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11Small fix to download size lookup and a loggerDan McGee2-1/+5
These were just two small things I came across today and found could be fixed or helpful, so I've added them and I'm not sure what else to bundle them with. commit_count++ Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11doc: add docs for repo-add -d optionDan McGee1-1/+5
This never got added when the option was brought in, so fix it. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11repo-add: Create/modify files databasesPyroPeter2-5/+21
Implements FS#11302. Dan: updated docs to not reference pkgfile. Signed-off-by: PyroPeter <abi1789@googlemail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11Add two pactests with non-trivial file countsDan McGee2-0/+30
These are probably useful anyway, but also exposed the double file list bug that will be fixed in a later commit. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11pactest: build the filelist using a set()Dan McGee1-6/+4
This will prevent duplicates, which we had plenty of once I made a few tests that had a list of files greater than the normal two. The previous logic was not working quite right. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11repo-add: use pushd/popdDan McGee1-9/+7
Rather than explicit cd calls, we can use the directory stack to our advantage. This also removes the need to store and restore $startdir, so kill the variable entirely. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10pactest: correctly write epoch and force as necessaryDan McGee3-0/+9
We were missing this in a few places; also add the ability to check the outcome via a new rule type. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Use double rather than float everywhereDan McGee3-11/+10
No real need to use the smaller floating point types here. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Progress callback cleanups and fixesDan McGee1-27/+21
* Remove a stale comment * Fix a logic error- the conditional disagreed with the comments * Remove some unnecessary floating point casts Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Ensure we use local package when calculating removed sizeDan McGee1-5/+7
We were checking if a package existed locally, but then using the incoming package to calculate removed size rather than the currently installed package. Also adjust the local variable in the replaces loop to make it more clear that we are always dealing with local packages here. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Remove need for floating point division in backendDan McGee5-30/+26
All of these can be done with integer division; the only slightly interesting part is ensuring we round up like before with calling the ceil() function. We can also remove the math library from requirements; now that the only ceil() calls are gone, we don't need this anymore. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07libalpm/be_package.c: fix small memleakXavier Chantry1-14/+10
file_pkg_ops can be a static struct like in other backends, we just need to initialize it at some point. Dan: add initialization flag. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07Fix some more simple conversion "errors"Dan McGee13-39/+40
None of these warn at the normal "-Wall -Werror" level, but casts do occur that we are fine with. Make them explicit to silence some warnings when using "-Wconversion". Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07Use size_t for alpm_list sizesAllan McRae12-28/+29
There is a lot of swtiching between size_t and int for alpm_list sizes in the codebase. Start converting these to all be size_t by adjusting the return type of alpm_list_count and fixing all additional warnings given by -Wconversion that are generated by this change. Dan: a few more small changes to ensure things compile, adjusting some printf format string characters to accommodate the larger size on x86_64. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07Refactor old date parsing into single methodDan McGee5-46/+18
We've managed to duplicate this four times at this point, so make it a method in util.c instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07Update copyright years for 2011Allan McRae65-69/+69
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-05vercmp: always return 0 if we perform a compareDan McGee1-2/+3
And change the wording slightly to indicate we *print* a value, not *return* it. You can't return negative values (they get coerced to 255), so it isn't worth it to try and cram the result into the return code. Acked-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-05Remove FORCE reading from local DBDan McGee1-6/+0
We never wrote it here, so no need to read it in either. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-05pactest: Use booleans where it makes senseDan McGee6-6/+6
No need to use 0/1 when we can use False/True for the force option. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-05pactest: remove dead functionDan McGee1-50/+0
Stopped being used after commit fa933df65b9. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-02Fix function indentationDan McGee1-22/+22
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Merge branch 'maint'Dan McGee3-18/+36
Conflicts: lib/libalpm/sync.c test/pacman/tests/ignore007.py
2010-12-30Declare all local functions staticAllan McRae7-63/+67
All functions that are limited to the local translation unit are declared static. This exposed that the _pkg_get_deltas declaration in be_local.c was being satified by the function in packages.c which when declared static caused linker failures. Fixes all warnings with -Wmissing-{declarations,prototypes}. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Respect Ignore{Pkg,Group} for group membersJakob Gruber2-2/+12
Fixes FS#19854. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Move group code to separate functionJakob Gruber1-15/+23
This makes the following commits more readable. No logic was changed in this commit. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Tests: Sync group which includes ignored pkgsJakob Gruber1-0/+23
* FS#19854 (--ignore is ignored with groups) * http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html (operation aborts when a package from a group is ignored/and user chooses not to install it) If a group member is ignored, we expect a) a question whether to install b) after saying 'no' to a), the ignored member not to be installed c) all other group members to be installed d) pacman to execute successfully Signed-off-by: Dan McGee <dan@archlinux.org> (cherry picked from commit 9d0b33fd3327ae6d2b15f50870c0885a2068d492)
2010-12-30Add const to some ALPM function signaturesJakob Gruber4-9/+9
char * -> const char *. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29doc: add website zip to clean filesDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29Merge branch 'maint'Dan McGee2-14/+19
2010-12-29makepkg: add option to clear buildflagsAllan McRae3-2/+15
Add the "buildflags" option, which is useful in its negative form for disabling CFLAGS, CXXFLAGS and LDFLAGS when building a package. This is useful when determining of one of these flags is causing an issue with a package. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29makepkg: Add check() function for running test suitesAllan McRae7-8/+70
A PKGBUILD can have an option check() function for running test suites between the build() and package() stages. This function is run by default but can be disabled globally in with "!check" in BUILDENV in makepkg.conf. This setting can be controlled on an individual package basis using makepkg's --check and --nocheck flags. Addition dependencies needed for running the test suite can be specified in the checkdepends array and are only checked when running the check() function. Original-work-by: Jeff C <jeff@kcaccess.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29Use limits.h for PATH_MAXAllan McRae3-10/+6
We use PATH_MAX everywhere by including limits.h so there is no point in doing a check for it in a different header when dealing with FreeBSD's libfetch. Also, remove autoconf check for strings.h header as it is not used anywhere. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29Detect undefined PATH_MAXAllan McRae11-5/+25
POSIX does not require PATH_MAX be defined when there is not actual limit to its value. This affects HURD based systems. Work around this by defining PATH_MAX to 4096 (as on Linux) when this is not defined. Also, clean up inclusions of limits.h and remove autoconf check for this header as we do not use macro shields for its inclusion anyway. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29Correct type for hash value storageAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29Various documentation updatesDan McGee2-14/+19
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29makepkg: escape closing bash array paren for awkDave Reisner1-4/+4
The closing parenthesis of bash arrays needs to be escaped in the ending address of awk expressions in order to play nicely with implementations of awk other than gawk. This change provides compatibility with gawk, nawk and mawk. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>