summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-12-12pacman: process all targets on upgrade operationDan McGee1-5/+15
If an early target fails, we stopped processing the rest of the list. We should continue all the way through and show relevant errors for each target if possible, and error out only at the end. We do process all targets to check for URLs first and will error out if some could not be processed; we then do a second loop and try to load each target specified on the command line. This mirrors a patch by Allan to do the same for removal operations. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-12pacman: list all unknown targets on removal operationAllan McRae1-1/+4
On a removal operation, pacman currently reports an error for the package that is not found in the database and then exists. Adjust so that all unknown packages are reported. Before: > pacman -R foo bar error: 'foo': target not found After: > pacman -R foo bar error: 'foo': target not found error: 'bar': target not found Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-08Use automake verbose helpers in custom make rulesDan McGee5-35/+27
This converts our script generation to use the built-in AM_V_GEN macro, which honors the V= setting passed to make and allows one to see the full command if they truly desire. The AM_V_at macro is also used in place of an explicit @ so verbose-mode compiles show all commands being run. We can also use these two macros in doc generation to quiet it down to the level we expect. Other minor changes: * a pointless test call is removed in test/pacman/tests/ * sed is used instead of dos2unix as we depend on it anyway * consecutive chmod calls are reduced to a single call (e.g., '+x,a-x') Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-08Make automake generate silent rules by defaultDan McGee1-1/+2
This will require you to pass 'V=1' if you want the previous, more verbose output. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-07Move items around in the alpm handle structDan McGee1-1/+1
This allows for the struct layout to have no empty spaces. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-07Slight local database files reading optimizationDan McGee1-5/+13
Since we know the length of the line, we can use this all the way through and do a cheaper operation than strdup() by just invoking malloc and memcpy directly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-07scripts/*: Declare several constant variables read-onlyLukas Fleischer6-10/+10
Be more semantically accurate and avoid accidental overwriting of some configuration variables that are considered to be constant. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-07Merge branch 'maint'Dan McGee4-9/+17
2011-12-07contrib/*: Hardcode program namesLukas Fleischer7-28/+36
Add a read-only variable "$myname" to every contrib script and hardcode program names instead of relying on "$0". The variable name "$myname" was chosen because it is already used in pacman and because we use "$myver" to specify the program version in the official scripts. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-07Add 'silent-rules' to automake setup in configure.acDan McGee1-1/+1
This is awesome, and I don't know why we haven't already done this. It gives us the much more less verbose make output in a few different ways: * If you run `make V=0`, you will get the quiet output. * If you run `./configure --enable-silent-rules`, the quiet output is the default; verbose output can be had by passing V=1 to make. make[3]: Entering directory `/home/dmcgee/projects/pacman/lib/libalpm' CC add.lo CC be_local.lo CC be_package.lo CC be_sync.lo CC delta.lo ..... Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05Use correct size in memsetDan McGee1-1/+1
We were using the size of a pointer, not the size of the whole archive_read_buffer struct. Thanks to Clang/LLVM 3.0 and Allan/Dave in IRC for finding this one. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05repo-add: enforce maximum .sig file sizeDan McGee1-7/+12
This prevents user error in adding a file generated via `gpg --sign` rather than `--detach-sign`, for example. The same 16KiB limit is used we use in our pacman download code. The section is moved above the checksum generation to avoid presenting info messages to the user if the signature isn't valid. Addresses a shortcoming pointed out in FS#27453. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05Enforce signature download size limit on -U <url> operationsDan McGee1-0/+3
We had a 16 KiB limit on database signatures, we should do the same here too to have a slight sanity check, even if we can't do so for the package itself yet. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-05contrib/paclist: Add "--help" command line parameterLukas Fleischer1-1/+1
Be consistent with all other contrib scripts and support the "--help" command line switch. Fixes FS#27258. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30Merge branch 'maint'Dan McGee8-21/+89
2011-11-30makepkg.5: fix typo s/tar,bz2/tar.bz2/Dave Reisner1-1/+1
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30makepkg: avoid using comm for diff'ing package listsDave Reisner1-7/+9
Whereas comm will check inputs to see if they're sorted (and warn when they aren't), grep doesn't even care about ordering. In this particular instance -- neither do we. We're only interested that the two lists are equivalent. Fixes FS#26580. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30_alpm_ldconfig: return value from _alpm_run_chrootDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30Add two new pactests for pacman upgrade behaviorDan McGee2-0/+65
Both currently marked as failing. * sync303.py encapsulates the broken behavior reported in FS#27214. * sync304.py shows how packages depending on a specific version of a package in SyncFirst can cause breakage of the dependency resolver. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30Miscellaneous post-4.0.1 updatesDan McGee3-12/+13
Some late-arriving translation updates and add the correct dates to the index.txt releases table. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30Add helper function for duplicating depends listsDan McGee1-27/+31
We do this in several of the package duplication steps; add a helper function for doing so to reduce some of the repetitive code. Also add a free_deplist function for our repeated depend list free calls of both the data and the list. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-22added doxygen documentationandrew.gregory.8@gmail.com2-30/+124
Made existing documentation more consistent and added documentation where there was none. One function still needs documentation and is marked with 'TODO'. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20Merge branch 'maint'Dan McGee4-10/+13
2011-11-20add key algo to import msgFlorian Pritz3-2/+25
Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20change gpg import message to resemble gpg --list-keysFlorian Pritz3-2/+10
Dan: const pointers, don't worry about bitfields. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20makepkg: add support for PACKAGER environment varPhillip Smith2-0/+6
Add support for overriding configuration in /etc/makepkg.conf and ~/.makepkg.conf by setting the environment variable PACKAGER similar to how SRCDEST and PKGDEST behave. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-11-20repo-add: Remove .tmp. prefix from outputAllan McRae1-1/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-11-20repo-add: ensure database and signature files are always viewed in wholeDan McGee1-12/+26
This addresses a short but sweet race condition currently existing in repo-add and repo-remove. We do the smart thing and zip the database to a location in a temporary directory and not over the original database directly. However, we then proceed to move this file directly from the temporary directory to our final location, which is more than likely a cross-filesystem move (/tmp on tmpfs) and thus non-atomic. Instead, zip the file to the same directory, prefixing the filename with '.tmp.'. We then move the file into place. This move is guaranteed to be atomic, so any reader of the database file will get either the old version, the new version, or ENOENT. We also perform a hardlink if possible instead of a move when shifting the old database out of the way to '.old'; this ensures there is no chance of a database file not existing during the whole process. Only one small race condition should now be present- when the database has been fully moved into place and the signature has not, you may see a mismatch. There seems to be no good way to address this, and it existed before this patch. A final note- if someone had locked-down permissions on the directory that the database files are in (e.g., could only write to foo.db.tar.gz, foo.db, foo.db.tar.gz.old, foo.db.old, and the lock file), this would break. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20repo-add: ensure path to LOCKFILE is always absoluteDan McGee1-8/+7
Given our semi-frequent use of pushd/popd, if we are in any directory but the original and the database path given was relative, we won't unlock the database file when cleaning up after an error. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20Final changes before 4.0.1 releaseDan McGee3-7/+10
* Add last-minute changes to NEWS * Don't treat '_' or '_n' special in scripts when finding translatable strings; this breaks with one use of `read` and a dummy _ variable Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20makepkg: trim trailing space from whitespace sensitive varsDave Reisner1-3/+3
This applies to pkgver, pkgrel, and epoch and ensures that any trailing whitespace outside of the context of the variable declaration itself is properly trimmed. The Bash parser will ignore this, and so should we. We don't need to worry about leading space because it would force a syntax error, or fail validation. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Update alpm_errno_t type to non-enum versionDan McGee1-1/+1
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Merge branch 'maint'Dan McGee90-1162/+1600
2011-11-16Add helper method for creating and opening archive objectDan McGee6-91/+123
This moves the common setup code of about 5 different callers into one method. Error messages will now be common and shared in all places; several paths did not have any messages at all before. In addition, we now pick an ideal block size for the archive read based off the larger value of our default buffer size or the st.st_blksize field. For a filesystem such as NFS, this is often much larger than the default 8192- values such as 32768 and 131072 are common. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Update translations from TransifexDan McGee29-310/+356
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15makepkg.conf: disable motd printing for rsync DLAGENTDave Reisner1-1/+1
Fixes FS#26806. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Allow sync_prepare to work in certain cases without sync databasesDan McGee2-10/+19
When doing a bare -U operation on a local package that doesn't pull in any dependencies from the sync databases, we can get away with missing database files. This makes the check conditional on no sync targets found in the target list. This is not the prettiest code here so we have a bit of hackish behavior required to straighten both the behavior and the nonsensical error message out. Addresses FS#26899. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Remove unnecessary casts in callback codeDan McGee1-5/+5
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-15Update documentation regarding signature extensionsAllan McRae1-1/+1
Commit e7b56f48 allowed makepkg to handle pgp signatures with the .sign extension. Update the man page to reflect this. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-14create a typedef for enum _alpm_errno_tJonathan Conder16-26/+26
This is consistent with the other enums and structs, and should be slightly more readable. Signed-off-by: Jonathan Conder <jonno.conder@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-13Update translations from TransifexDan McGee81-952/+1316
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-13Updates in preparation for 4.0.1 releaseDan McGee5-10/+29
Bump the version, update the translation template files, and fill in NEWS with relevant commits and changes since 4.0.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-13Merge branch 'maint'Dan McGee1-1/+1
2011-11-13add fnmatch support for HoldPkgDave Reisner3-2/+20
Adds test remove031. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-13add support for back end fnmatch'd optionsDave Reisner10-10/+107
This is work originally provided by Sascha Kruse on FS#20360 with only minor adjustments to the implementation. It's been expanded to cover: NoUpgrade, NoExtract, IgnorePkg, IgnoreGroup. Adds tests ignore008, sync139, sync502, and sync503. Also satisfies FS#18988. Original-work-by: Sascha Kruse <knopwob@googlemail.com> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-11invert iteration order for ignoregroupDave Reisner1-2/+2
This is a simple change that allows comparions to be more in line with how other checks are done. It will be necessary for ensuing patchwork that implements fnmatch for comparing and assumes a specific argument ordering. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-10makepkg: check for value before using eval'd varDave Reisner1-1/+1
This prevent bsdtar from exploding when install= or changelog= are present without a value. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-07Merge branch 'maint'Dan McGee3-5/+8
2011-11-07makepkg: handle pgp signatures with .sign extensionAllan McRae1-2/+2
Detached sgnature files with extension .sign are accepted by gnupg. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-03Fix download progress rounding edge caseDan McGee1-2/+5
Allan's original message: Occasionally when the download rate showed 100.0 the output got messed up. This was caused by the rounding of a number between 99.95 and 100. Adjust the threshold to avoid this rounding issue. Dan: make this fix, but also show values between 0 and 9.995 with two decimal places since we have the room. Original-fix-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>