From 72d154f9bdb8d4792fa2bff0cccaad8bf2f8069a Mon Sep 17 00:00:00 2001 From: Philip Hands Date: Fri, 30 Jun 2017 22:49:24 +0200 Subject: stretch upgrade: squid3 --> squid Signed-off-by: Holger Levsen --- .../profitbricks-build9-amd64/etc/squid/squid.conf | 5787 ++++++++++++++++++++ .../etc/squid3/squid.conf | 5787 -------------------- 2 files changed, 5787 insertions(+), 5787 deletions(-) create mode 100644 hosts/profitbricks-build9-amd64/etc/squid/squid.conf delete mode 100644 hosts/profitbricks-build9-amd64/etc/squid3/squid.conf (limited to 'hosts/profitbricks-build9-amd64/etc') diff --git a/hosts/profitbricks-build9-amd64/etc/squid/squid.conf b/hosts/profitbricks-build9-amd64/etc/squid/squid.conf new file mode 100644 index 00000000..bd709a30 --- /dev/null +++ b/hosts/profitbricks-build9-amd64/etc/squid/squid.conf @@ -0,0 +1,5787 @@ +# WELCOME TO SQUID 3.1.20 +# ---------------------------- +# +# This is the documentation for the Squid configuration file. +# This documentation can also be found online at: +# http://www.squid-cache.org/Doc/config/ +# +# You may wish to look at the Squid home page and wiki for the +# FAQ and other documentation: +# http://www.squid-cache.org/ +# http://wiki.squid-cache.org/SquidFaq +# http://wiki.squid-cache.org/ConfigExamples +# +# This documentation shows what the defaults for various directives +# happen to be. If you don't need to change the default, you should +# leave the line out of your squid.conf in most cases. +# +# In some cases "none" refers to no default setting at all, +# while in other cases it refers to the value of the option +# - the comments for that keyword indicate if this is the case. +# + +# Configuration options can be included using the "include" directive. +# Include takes a list of files to include. Quoting and wildcards are +# supported. +# +# For example, +# +# include /path/to/included/file/squid.acl.config +# +# Includes can be nested up to a hard-coded depth of 16 levels. +# This arbitrary restriction is to prevent recursive include references +# from causing Squid entering an infinite loop whilst trying to load +# configuration files. + +# TAG: dns_testnames +# Remove this line. DNS is no longer tested on startup. +#Default: +# none + +# TAG: extension_methods +# Remove this line. All valid methods for HTTP are accepted by default. +#Default: +# none + +# TAG: incoming_rate +#Default: +# none + +# TAG: server_http11 +# Remove this line. HTTP/1.1 is supported by default. +#Default: +# none + +# TAG: upgrade_http0.9 +# Remove this line. ICY/1.0 streaming protocol is supported by default. +#Default: +# none + +# TAG: zph_local +# Alter these entries. Use the qos_flows directive instead. +#Default: +# none + +# TAG: header_access +# Since squid-3.0 replace with request_header_access or reply_header_access +# depending on whether you wish to match client requests or server replies. +#Default: +# none + +# TAG: httpd_accel_no_pmtu_disc +# Since squid-3.0 use the 'disable-pmtu-discovery' flag on http_port instead. +#Default: +# none + +# OPTIONS FOR AUTHENTICATION +# ----------------------------------------------------------------------------- + +# TAG: auth_param +# This is used to define parameters for the various authentication +# schemes supported by Squid. +# +# format: auth_param scheme parameter [setting] +# +# The order in which authentication schemes are presented to the client is +# dependent on the order the scheme first appears in config file. IE +# has a bug (it's not RFC 2617 compliant) in that it will use the basic +# scheme if basic is the first entry presented, even if more secure +# schemes are presented. For now use the order in the recommended +# settings section below. If other browsers have difficulties (don't +# recognize the schemes offered even if you are using basic) either +# put basic first, or disable the other schemes (by commenting out their +# program entry). +# +# Once an authentication scheme is fully configured, it can only be +# shutdown by shutting squid down and restarting. Changes can be made on +# the fly and activated with a reconfigure. I.E. You can change to a +# different helper, but not unconfigure the helper completely. +# +# Please note that while this directive defines how Squid processes +# authentication it does not automatically activate authentication. +# To use authentication you must in addition make use of ACLs based +# on login name in http_access (proxy_auth, proxy_auth_regex or +# external with %LOGIN used in the format tag). The browser will be +# challenged for authentication on the first such acl encountered +# in http_access processing and will also be re-challenged for new +# login credentials if the request is being denied by a proxy_auth +# type acl. +# +# WARNING: authentication can't be used in a transparently intercepting +# proxy as the client then thinks it is talking to an origin server and +# not the proxy. This is a limitation of bending the TCP/IP protocol to +# transparently intercepting port 80, not a limitation in Squid. +# Ports flagged 'transparent', 'intercept', or 'tproxy' have +# authentication disabled. +# +# === Parameters for the basic scheme follow. === +# +# "program" cmdline +# Specify the command for the external authenticator. Such a program +# reads a line containing "username password" and replies "OK" or +# "ERR" in an endless loop. "ERR" responses may optionally be followed +# by a error description available as %m in the returned error page. +# If you use an authenticator, make sure you have 1 acl of type +# proxy_auth. +# +# By default, the basic authentication scheme is not used unless a +# program is specified. +# +# If you want to use the traditional NCSA proxy authentication, set +# this line to something like +# +# auth_param basic program /usr/lib/squid/ncsa_auth /usr/etc/passwd +# +# "utf8" on|off +# HTTP uses iso-latin-1 as characterset, while some authentication +# backends such as LDAP expects UTF-8. If this is set to on Squid will +# translate the HTTP iso-latin-1 charset to UTF-8 before sending the +# username & password to the helper. +# +# "children" numberofchildren +# The number of authenticator processes to spawn. If you start too few +# Squid will have to wait for them to process a backlog of credential +# verifications, slowing it down. When password verifications are +# done via a (slow) network you are likely to need lots of +# authenticator processes. +# auth_param basic children 5 +# +# "concurrency" concurrency +# The number of concurrent requests the helper can process. +# The default of 0 is used for helpers who only supports +# one request at a time. Setting this changes the protocol used to +# include a channel number first on the request/response line, allowing +# multiple requests to be sent to the same helper in parallell without +# wating for the response. +# Must not be set unless it's known the helper supports this. +# auth_param basic concurrency 0 +# +# "realm" realmstring +# Specifies the realm name which is to be reported to the +# client for the basic proxy authentication scheme (part of +# the text the user will see when prompted their username and +# password). There is no default. +# auth_param basic realm Squid proxy-caching web server +# +# "credentialsttl" timetolive +# Specifies how long squid assumes an externally validated +# username:password pair is valid for - in other words how +# often the helper program is called for that user. Set this +# low to force revalidation with short lived passwords. Note +# setting this high does not impact your susceptibility +# to replay attacks unless you are using an one-time password +# system (such as SecureID). If you are using such a system, +# you will be vulnerable to replay attacks unless you also +# use the max_user_ip ACL in an http_access rule. +# +# "casesensitive" on|off +# Specifies if usernames are case sensitive. Most user databases are +# case insensitive allowing the same username to be spelled using both +# lower and upper case letters, but some are case sensitive. This +# makes a big difference for user_max_ip ACL processing and similar. +# auth_param basic casesensitive off +# +# === Parameters for the digest scheme follow === +# +# "program" cmdline +# Specify the command for the external authenticator. Such +# a program reads a line containing "username":"realm" and +# replies with the appropriate H(A1) value hex encoded or +# ERR if the user (or his H(A1) hash) does not exists. +# See rfc 2616 for the definition of H(A1). +# "ERR" responses may optionally be followed by a error description +# available as %m in the returned error page. +# +# By default, the digest authentication scheme is not used unless a +# program is specified. +# +# If you want to use a digest authenticator, set this line to +# something like +# +# auth_param digest program /usr/lib/squid/digest_pw_auth /usr/etc/digpass +# +# "utf8" on|off +# HTTP uses iso-latin-1 as characterset, while some authentication +# backends such as LDAP expects UTF-8. If this is set to on Squid will +# translate the HTTP iso-latin-1 charset to UTF-8 before sending the +# username & password to the helper. +# +# "children" numberofchildren +# The number of authenticator processes to spawn (no default). +# If you start too few Squid will have to wait for them to +# process a backlog of H(A1) calculations, slowing it down. +# When the H(A1) calculations are done via a (slow) network +# you are likely to need lots of authenticator processes. +# auth_param digest children 5 +# +# "realm" realmstring +# Specifies the realm name which is to be reported to the +# client for the digest proxy authentication scheme (part of +# the text the user will see when prompted their username and +# password). There is no default. +# auth_param digest realm Squid proxy-caching web server +# +# "nonce_garbage_interval" timeinterval +# Specifies the interval that nonces that have been issued +# to client_agent's are checked for validity. +# +# "nonce_max_duration" timeinterval +# Specifies the maximum length of time a given nonce will be +# valid for. +# +# "nonce_max_count" number +# Specifies the maximum number of times a given nonce can be +# used. +# +# "nonce_strictness" on|off +# Determines if squid requires strict increment-by-1 behavior +# for nonce counts, or just incrementing (off - for use when +# useragents generate nonce counts that occasionally miss 1 +# (ie, 1,2,4,6)). Default off. +# +# "check_nonce_count" on|off +# This directive if set to off can disable the nonce count check +# completely to work around buggy digest qop implementations in +# certain mainstream browser versions. Default on to check the +# nonce count to protect from authentication replay attacks. +# +# "post_workaround" on|off +# This is a workaround to certain buggy browsers who sends +# an incorrect request digest in POST requests when reusing +# the same nonce as acquired earlier on a GET request. +# +# === NTLM scheme options follow === +# +# "program" cmdline +# Specify the command for the external NTLM authenticator. +# Such a program reads exchanged NTLMSSP packets with +# the browser via Squid until authentication is completed. +# If you use an NTLM authenticator, make sure you have 1 acl +# of type proxy_auth. By default, the NTLM authenticator_program +# is not used. +# +# auth_param ntlm program /usr/lib/squid/ntlm_auth +# +# "children" numberofchildren +# The number of authenticator processes to spawn (no default). +# If you start too few Squid will have to wait for them to +# process a backlog of credential verifications, slowing it +# down. When credential verifications are done via a (slow) +# network you are likely to need lots of authenticator +# processes. +# +# auth_param ntlm children 5 +# +# "keep_alive" on|off +# Whether to keep the connection open after the initial response where +# Squid tells the browser which schemes are supported by the proxy. +# Some browsers are known to present many login popups or to corrupt +# POST/PUT requests transfer if the connection is not closed. +# The default is currently OFF to avoid this, but may change. +# +# auth_param ntlm keep_alive on +# +# === Options for configuring the NEGOTIATE auth-scheme follow === +# +# "program" cmdline +# Specify the command for the external Negotiate authenticator. +# This protocol is used in Microsoft Active-Directory enabled setups with +# the Microsoft Internet Explorer or Mozilla Firefox browsers. +# Its main purpose is to exchange credentials with the Squid proxy +# using the Kerberos mechanisms. +# If you use a Negotiate authenticator, make sure you have at least +# one acl of type proxy_auth active. By default, the negotiate +# authenticator_program is not used. +# The only supported program for this role is the ntlm_auth +# program distributed as part of Samba, version 4 or later. +# +# auth_param negotiate program /usr/lib/squid/ntlm_auth --helper-protocol=gss-spnego +# +# "children" numberofchildren +# The number of authenticator processes to spawn (no default). +# If you start too few Squid will have to wait for them to +# process a backlog of credential verifications, slowing it +# down. When crendential verifications are done via a (slow) +# network you are likely to need lots of authenticator +# processes. +# auth_param negotiate children 5 +# +# "keep_alive" on|off +# Whether to keep the connection open after the initial response where +# Squid tells the browser which schemes are supported by the proxy. +# Some browsers are known to present many login popups or to corrupt +# POST/PUT requests transfer if the connection is not closed. +# The default is currently OFF to avoid this, but may change. +# +# auth_param negotiate keep_alive on +# +# +# Examples: +# +##Recommended minimum configuration per scheme: +##auth_param negotiate program +##auth_param negotiate children 5 +##auth_param negotiate keep_alive on +## +##auth_param ntlm program +##auth_param ntlm children 5 +##auth_param ntlm keep_alive on +## +##auth_param digest program +##auth_param digest children 5 +##auth_param digest realm Squid proxy-caching web server +##auth_param digest nonce_garbage_interval 5 minutes +##auth_param digest nonce_max_duration 30 minutes +##auth_param digest nonce_max_count 50 +## +##auth_param basic program +##auth_param basic children 5 +##auth_param basic realm Squid proxy-caching web server +##auth_param basic credentialsttl 2 hours +#Default: +# none + +# TAG: authenticate_cache_garbage_interval +# The time period between garbage collection across the username cache. +# This is a tradeoff between memory utilization (long intervals - say +# 2 days) and CPU (short intervals - say 1 minute). Only change if you +# have good reason to. +#Default: +# authenticate_cache_garbage_interval 1 hour + +# TAG: authenticate_ttl +# The time a user & their credentials stay in the logged in +# user cache since their last request. When the garbage +# interval passes, all user credentials that have passed their +# TTL are removed from memory. +#Default: +# authenticate_ttl 1 hour + +# TAG: authenticate_ip_ttl +# If you use proxy authentication and the 'max_user_ip' ACL, +# this directive controls how long Squid remembers the IP +# addresses associated with each user. Use a small value +# (e.g., 60 seconds) if your users might change addresses +# quickly, as is the case with dialups. You might be safe +# using a larger value (e.g., 2 hours) in a corporate LAN +# environment with relatively static address assignments. +#Default: +# authenticate_ip_ttl 0 seconds + +# ACCESS CONTROLS +# ----------------------------------------------------------------------------- + +# TAG: external_acl_type +# This option defines external acl classes using a helper program +# to look up the status +# +# external_acl_type name [options] FORMAT.. /path/to/helper [helper arguments..] +# +# Options: +# +# ttl=n TTL in seconds for cached results (defaults to 3600 +# for 1 hour) +# negative_ttl=n +# TTL for cached negative lookups (default same +# as ttl) +# children=n Number of acl helper processes spawn to service +# external acl lookups of this type. (default 5) +# concurrency=n concurrency level per process. Only used with helpers +# capable of processing more than one query at a time. +# cache=n result cache size, 0 is unbounded (default) +# grace=n Percentage remaining of TTL where a refresh of a +# cached entry should be initiated without needing to +# wait for a new reply. (default 0 for no grace period) +# protocol=2.5 Compatibility mode for Squid-2.5 external acl helpers +# ipv4 / ipv6 IP protocol used to communicate with this helper. +# The default is to auto-detect IPv6 and use it when available. +# +# FORMAT specifications +# +# %LOGIN Authenticated user login name +# %EXT_USER Username from external acl +# %IDENT Ident user name +# %SRC Client IP +# %SRCPORT Client source port +# %URI Requested URI +# %DST Requested host +# %PROTO Requested protocol +# %PORT Requested port +# %PATH Requested URL path +# %METHOD Request method +# %MYADDR Squid interface address +# %MYPORT Squid http_port number +# %PATH Requested URL-path (including query-string if any) +# %USER_CERT SSL User certificate in PEM format +# %USER_CERTCHAIN SSL User certificate chain in PEM format +# %USER_CERT_xx SSL User certificate subject attribute xx +# %USER_CA_xx SSL User certificate issuer attribute xx +# +# %>{Header} HTTP request header "Header" +# %>{Hdr:member} +# HTTP request header "Hdr" list member "member" +# %>{Hdr:;member} +# HTTP request header list member using ; as +# list separator. ; can be any non-alphanumeric +# character. +# +# %<{Header} HTTP reply header "Header" +# %<{Hdr:member} +# HTTP reply header "Hdr" list member "member" +# %<{Hdr:;member} +# HTTP reply header list member using ; as +# list separator. ; can be any non-alphanumeric +# character. +# +# %% The percent sign. Useful for helpers which need +# an unchanging input format. +# +# In addition to the above, any string specified in the referencing +# acl will also be included in the helper request line, after the +# specified formats (see the "acl external" directive) +# +# The helper receives lines per the above format specification, +# and returns lines starting with OK or ERR indicating the validity +# of the request and optionally followed by additional keywords with +# more details. +# +# General result syntax: +# +# OK/ERR keyword=value ... +# +# Defined keywords: +# +# user= The users name (login) +# password= The users password (for login= cache_peer option) +# message= Message describing the reason. Available as %o +# in error pages +# tag= Apply a tag to a request (for both ERR and OK results) +# Only sets a tag, does not alter existing tags. +# log= String to be logged in access.log. Available as +# %ea in logformat specifications +# +# If protocol=3.0 (the default) then URL escaping is used to protect +# each value in both requests and responses. +# +# If using protocol=2.5 then all values need to be enclosed in quotes +# if they may contain whitespace, or the whitespace escaped using \. +# And quotes or \ characters within the keyword value must be \ escaped. +# +# When using the concurrency= option the protocol is changed by +# introducing a query channel tag infront of the request/response. +# The query channel tag is a number between 0 and concurrency-1. +#Default: +# none + +# TAG: acl +# Defining an Access List +# +# Every access list definition must begin with an aclname and acltype, +# followed by either type-specific arguments or a quoted filename that +# they are read from. +# +# acl aclname acltype argument ... +# acl aclname acltype "file" ... +# +# When using "file", the file should contain one item per line. +# +# By default, regular expressions are CASE-SENSITIVE. +# To make them case-insensitive, use the -i option. To return case-sensitive +# use the +i option between patterns, or make a new ACL line without -i. +# +# Some acl types require suspending the current request in order +# to access some external data source. +# Those which do are marked with the tag [slow], those which +# don't are marked as [fast]. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl +# for further information +# +# ***** ACL TYPES AVAILABLE ***** +# +# acl aclname src ip-address/netmask ... # clients IP address [fast] +# acl aclname src addr1-addr2/netmask ... # range of addresses [fast] +# acl aclname dst ip-address/netmask ... # URL host's IP address [slow] +# acl aclname myip ip-address/netmask ... # local socket IP address [fast] +# +# acl aclname arp mac-address ... (xx:xx:xx:xx:xx:xx notation) +# # The arp ACL requires the special configure option --enable-arp-acl. +# # Furthermore, the ARP ACL code is not portable to all operating systems. +# # It works on Linux, Solaris, Windows, FreeBSD, and some +# # other *BSD variants. +# # [fast] +# # +# # NOTE: Squid can only determine the MAC address for clients that are on +# # the same subnet. If the client is on a different subnet, +# # then Squid cannot find out its MAC address. +# +# acl aclname srcdomain .foo.com ... +# # reverse lookup, from client IP [slow] +# acl aclname dstdomain .foo.com ... +# # Destination server from URL [fast] +# acl aclname srcdom_regex [-i] \.foo\.com ... +# # regex matching client name [slow] +# acl aclname dstdom_regex [-i] \.foo\.com ... +# # regex matching server [fast] +# # +# # For dstdomain and dstdom_regex a reverse lookup is tried if a IP +# # based URL is used and no match is found. The name "none" is used +# # if the reverse lookup fails. +# +# acl aclname src_as number ... +# acl aclname dst_as number ... +# # [fast] +# # Except for access control, AS numbers can be used for +# # routing of requests to specific caches. Here's an +# # example for routing all requests for AS#1241 and only +# # those to mycache.mydomain.net: +# # acl asexample dst_as 1241 +# # cache_peer_access mycache.mydomain.net allow asexample +# # cache_peer_access mycache_mydomain.net deny all +# +# acl aclname peername myPeer ... +# # [fast] +# # match against a named cache_peer entry +# # set unique name= on cache_peer lines for reliable use. +# +# acl aclname time [day-abbrevs] [h1:m1-h2:m2] +# # [fast] +# # day-abbrevs: +# # S - Sunday +# # M - Monday +# # T - Tuesday +# # W - Wednesday +# # H - Thursday +# # F - Friday +# # A - Saturday +# # h1:m1 must be less than h2:m2 +# +# acl aclname url_regex [-i] ^http:// ... +# # regex matching on whole URL [fast] +# acl aclname urlpath_regex [-i] \.gif$ ... +# # regex matching on URL path [fast] +# +# acl aclname port 80 70 21 0-1024... # destination TCP port [fast] +# # ranges are alloed +# acl aclname myport 3128 ... # local socket TCP port [fast] +# acl aclname myportname 3128 ... # http(s)_port name [fast] +# +# acl aclname proto HTTP FTP ... # request protocol [fast] +# +# acl aclname method GET POST ... # HTTP request method [fast] +# +# acl aclname http_status 200 301 500- 400-403 ... +# # status code in reply [fast] +# +# acl aclname browser [-i] regexp ... +# # pattern match on User-Agent header (see also req_header below) [fast] +# +# acl aclname referer_regex [-i] regexp ... +# # pattern match on Referer header [fast] +# # Referer is highly unreliable, so use with care +# +# acl aclname ident username ... +# acl aclname ident_regex [-i] pattern ... +# # string match on ident output [slow] +# # use REQUIRED to accept any non-null ident. +# +# acl aclname proxy_auth [-i] username ... +# acl aclname proxy_auth_regex [-i] pattern ... +# # perform http authentication challenge to the client and match against +# # supplied credentials [slow] +# # +# # takes a list of allowed usernames. +# # use REQUIRED to accept any valid username. +# # +# # Will use proxy authentication in forward-proxy scenarios, and plain +# # http authenticaiton in reverse-proxy scenarios +# # +# # NOTE: when a Proxy-Authentication header is sent but it is not +# # needed during ACL checking the username is NOT logged +# # in access.log. +# # +# # NOTE: proxy_auth requires a EXTERNAL authentication program +# # to check username/password combinations (see +# # auth_param directive). +# # +# # NOTE: proxy_auth can't be used in a transparent/intercepting proxy +# # as the browser needs to be configured for using a proxy in order +# # to respond to proxy authentication. +# +# acl aclname snmp_community string ... +# # A community string to limit access to your SNMP Agent [fast] +# # Example: +# # +# # acl snmppublic snmp_community public +# +# acl aclname maxconn number +# # This will be matched when the client's IP address has +# # more than TCP connections established. [fast] +# # NOTE: This only measures direct TCP links so X-Forwarded-For +# # indirect clients are not counted. +# +# acl aclname max_user_ip [-s] number +# # This will be matched when the user attempts to log in from more +# # than different ip addresses. The authenticate_ip_ttl +# # parameter controls the timeout on the ip entries. [fast] +# # If -s is specified the limit is strict, denying browsing +# # from any further IP addresses until the ttl has expired. Without +# # -s Squid will just annoy the user by "randomly" denying requests. +# # (the counter is reset each time the limit is reached and a +# # request is denied) +# # NOTE: in acceleration mode or where there is mesh of child proxies, +# # clients may appear to come from multiple addresses if they are +# # going through proxy farms, so a limit of 1 may cause user problems. +# +# acl aclname req_mime_type [-i] mime-type ... +# # regex match against the mime type of the request generated +# # by the client. Can be used to detect file upload or some +# # types HTTP tunneling requests [fast] +# # NOTE: This does NOT match the reply. You cannot use this +# # to match the returned file type. +# +# acl aclname req_header header-name [-i] any\.regex\.here +# # regex match against any of the known request headers. May be +# # thought of as a superset of "browser", "referer" and "mime-type" +# # ACL [fast] +# +# acl aclname rep_mime_type [-i] mime-type ... +# # regex match against the mime type of the reply received by +# # squid. Can be used to detect file download or some +# # types HTTP tunneling requests. [fast] +# # NOTE: This has no effect in http_access rules. It only has +# # effect in rules that affect the reply data stream such as +# # http_reply_access. +# +# acl aclname rep_header header-name [-i] any\.regex\.here +# # regex match against any of the known reply headers. May be +# # thought of as a superset of "browser", "referer" and "mime-type" +# # ACLs [fast] +# +# acl aclname external class_name [arguments...] +# # external ACL lookup via a helper class defined by the +# # external_acl_type directive [slow] +# +# acl aclname user_cert attribute values... +# # match against attributes in a user SSL certificate +# # attribute is one of DN/C/O/CN/L/ST [fast] +# +# acl aclname ca_cert attribute values... +# # match against attributes a users issuing CA SSL certificate +# # attribute is one of DN/C/O/CN/L/ST [fast] +# +# acl aclname ext_user username ... +# acl aclname ext_user_regex [-i] pattern ... +# # string match on username returned by external acl helper [slow] +# # use REQUIRED to accept any non-null user name. +# +# acl aclname tag tagvalue ... +# # string match on tag returned by external acl helper [slow] +# +# Examples: +# acl macaddress arp 09:00:2b:23:45:67 +# acl myexample dst_as 1241 +# acl password proxy_auth REQUIRED +# acl fileupload req_mime_type -i ^multipart/form-data$ +# acl javascript rep_mime_type -i ^application/x-javascript$ +# +#Default: +# acl all src all +# +# +# Recommended minimum configuration: +# (now built-in) +#acl manager proto cache_object +#acl localhost src 127.0.0.1/32 ::1 +#acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 + +# Example rule allowing access from your local networks. +# Adapt to list your (internal) IP networks from where browsing +# should be allowed +#acl localnet src 10.0.0.0/8 # RFC1918 possible internal network +#acl localnet src 172.16.0.0/12 # RFC1918 possible internal network +#acl localnet src 192.168.0.0/16 # RFC1918 possible internal network +#acl localnet src fc00::/7 # RFC 4193 local private network range +#acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines + +acl SSL_ports port 443 +acl Safe_ports port 80 # http +acl Safe_ports port 21 # ftp +acl Safe_ports port 443 # https +acl Safe_ports port 70 # gopher +acl Safe_ports port 210 # wais +acl Safe_ports port 1025-65535 # unregistered ports +acl Safe_ports port 280 # http-mgmt +acl Safe_ports port 488 # gss-http +acl Safe_ports port 591 # filemaker +acl Safe_ports port 777 # multiling http +acl CONNECT method CONNECT + +# TAG: follow_x_forwarded_for +# Allowing or Denying the X-Forwarded-For header to be followed to +# find the original source of a request. +# +# Requests may pass through a chain of several other proxies +# before reaching us. The X-Forwarded-For header will contain a +# comma-separated list of the IP addresses in the chain, with the +# rightmost address being the most recent. +# +# If a request reaches us from a source that is allowed by this +# configuration item, then we consult the X-Forwarded-For header +# to see where that host received the request from. If the +# X-Forwarded-For header contains multiple addresses, we continue +# backtracking until we reach an address for which we are not allowed +# to follow the X-Forwarded-For header, or until we reach the first +# address in the list. For the purpose of ACL used in the +# follow_x_forwarded_for directive the src ACL type always matches +# the address we are testing and srcdomain matches its rDNS. +# +# The end result of this process is an IP address that we will +# refer to as the indirect client address. This address may +# be treated as the client address for access control, ICAP, delay +# pools and logging, depending on the acl_uses_indirect_client, +# icap_uses_indirect_client, delay_pool_uses_indirect_client and +# log_uses_indirect_client options. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +# SECURITY CONSIDERATIONS: +# +# Any host for which we follow the X-Forwarded-For header +# can place incorrect information in the header, and Squid +# will use the incorrect information as if it were the +# source address of the request. This may enable remote +# hosts to bypass any access control restrictions that are +# based on the client's source addresses. +# +# For example: +# +# acl localhost src 127.0.0.1 +# acl my_other_proxy srcdomain .proxy.example.com +# follow_x_forwarded_for allow localhost +# follow_x_forwarded_for allow my_other_proxy +#Default: +# follow_x_forwarded_for deny all + +# TAG: acl_uses_indirect_client on|off +# Controls whether the indirect client address +# (see follow_x_forwarded_for) is used instead of the +# direct client address in acl matching. +# +# NOTE: maxconn ACL considers direct TCP links and indirect +# clients will always have zero. So no match. +#Default: +# acl_uses_indirect_client on + +# TAG: delay_pool_uses_indirect_client on|off +# Controls whether the indirect client address +# (see follow_x_forwarded_for) is used instead of the +# direct client address in delay pools. +#Default: +# delay_pool_uses_indirect_client on + +# TAG: log_uses_indirect_client on|off +# Controls whether the indirect client address +# (see follow_x_forwarded_for) is used instead of the +# direct client address in the access log. +#Default: +# log_uses_indirect_client on + +# TAG: http_access +# Allowing or Denying access based on defined access lists +# +# Access to the HTTP port: +# http_access allow|deny [!]aclname ... +# +# NOTE on default values: +# +# If there are no "access" lines present, the default is to deny +# the request. +# +# If none of the "access" lines cause a match, the default is the +# opposite of the last line in the list. If the last line was +# deny, the default is allow. Conversely, if the last line +# is allow, the default will be deny. For these reasons, it is a +# good idea to have an "deny all" entry at the end of your access +# lists to avoid potential confusion. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +#Default: +# http_access deny all +# + +# +# Recommended minimum Access Permission configuration: +# +# Only allow cachemgr access from localhost +http_access allow manager localhost +http_access deny manager + +# Deny requests to certain unsafe ports +http_access deny !Safe_ports + +# Deny CONNECT to other than secure SSL ports +http_access deny CONNECT !SSL_ports + +# We strongly recommend the following be uncommented to protect innocent +# web applications running on the proxy server who think the only +# one who can access services on "localhost" is a local user +#http_access deny to_localhost + +# +# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS +# + +# Example rule allowing access from your local networks. +# Adapt localnet in the ACL section to list your (internal) IP networks +# from where browsing should be allowed +#http_access allow localnet +http_access allow localhost + +# And finally deny all other access to this proxy +http_access deny all + +# TAG: adapted_http_access +# Allowing or Denying access based on defined access lists +# +# Essentially identical to http_access, but runs after redirectors +# and ICAP/eCAP adaptation. Allowing access control based on their +# output. +# +# If not set then only http_access is used. +#Default: +# none + +# TAG: http_reply_access +# Allow replies to client requests. This is complementary to http_access. +# +# http_reply_access allow|deny [!] aclname ... +# +# NOTE: if there are no access lines present, the default is to allow +# all replies +# +# If none of the access lines cause a match the opposite of the +# last line will apply. Thus it is good practice to end the rules +# with an "allow all" or "deny all" entry. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# none + +# TAG: icp_access +# Allowing or Denying access to the ICP port based on defined +# access lists +# +# icp_access allow|deny [!]aclname ... +# +# See http_access for details +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +## Allow ICP queries from local networks only +##icp_access allow localnet +##icp_access deny all +#Default: +# icp_access deny all + +# TAG: htcp_access +# Allowing or Denying access to the HTCP port based on defined +# access lists +# +# htcp_access allow|deny [!]aclname ... +# +# See http_access for details +# +# NOTE: The default if no htcp_access lines are present is to +# deny all traffic. This default may cause problems with peers +# using the htcp or htcp-oldsquid options. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +## Allow HTCP queries from local networks only +##htcp_access allow localnet +##htcp_access deny all +#Default: +# htcp_access deny all + +# TAG: htcp_clr_access +# Allowing or Denying access to purge content using HTCP based +# on defined access lists +# +# htcp_clr_access allow|deny [!]aclname ... +# +# See http_access for details +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +## Allow HTCP CLR requests from trusted peers +#acl htcp_clr_peer src 172.16.1.2 +#htcp_clr_access allow htcp_clr_peer +#Default: +# htcp_clr_access deny all + +# TAG: miss_access +# Determins whether network access is permitted when satisfying a request. +# +# For example; +# to force your neighbors to use you as a sibling instead of +# a parent. +# +# acl localclients src 172.16.0.0/16 +# miss_access allow localclients +# miss_access deny !localclients +# +# This means only your local clients are allowed to fetch relayed/MISS +# replies from the network and all other clients can only fetch cached +# objects (HITs). +# +# +# The default for this setting allows all clients who passed the +# http_access rules to relay via this proxy. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# miss_access allow all + +# TAG: ident_lookup_access +# A list of ACL elements which, if matched, cause an ident +# (RFC 931) lookup to be performed for this request. For +# example, you might choose to always perform ident lookups +# for your main multi-user Unix boxes, but not for your Macs +# and PCs. By default, ident lookups are not performed for +# any requests. +# +# To enable ident lookups for specific client addresses, you +# can follow this example: +# +# acl ident_aware_hosts src 198.168.1.0/24 +# ident_lookup_access allow ident_aware_hosts +# ident_lookup_access deny all +# +# Only src type ACL checks are fully supported. A srcdomain +# ACL might work at times, but it will not always provide +# the correct result. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# ident_lookup_access deny all + +# TAG: reply_body_max_size size [acl acl...] +# This option specifies the maximum size of a reply body. It can be +# used to prevent users from downloading very large files, such as +# MP3's and movies. When the reply headers are received, the +# reply_body_max_size lines are processed, and the first line where +# all (if any) listed ACLs are true is used as the maximum body size +# for this reply. +# +# This size is checked twice. First when we get the reply headers, +# we check the content-length value. If the content length value exists +# and is larger than the allowed size, the request is denied and the +# user receives an error message that says "the request or reply +# is too large." If there is no content-length, and the reply +# size exceeds this limit, the client's connection is just closed +# and they will receive a partial reply. +# +# WARNING: downstream caches probably can not detect a partial reply +# if there is no content-length header, so they will cache +# partial responses and give them out as hits. You should NOT +# use this option if you have downstream caches. +# +# WARNING: A maximum size smaller than the size of squid's error messages +# will cause an infinite loop and crash squid. Ensure that the smallest +# non-zero value you use is greater that the maximum header size plus +# the size of your largest error page. +# +# If you set this parameter none (the default), there will be +# no limit imposed. +# +# Configuration Format is: +# reply_body_max_size SIZE UNITS [acl ...] +# ie. +# reply_body_max_size 10 MB +# +#Default: +# none + +# NETWORK OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: http_port +# Usage: port [options] +# hostname:port [options] +# 1.2.3.4:port [options] +# +# The socket addresses where Squid will listen for HTTP client +# requests. You may specify multiple socket addresses. +# There are three forms: port alone, hostname with port, and +# IP address with port. If you specify a hostname or IP +# address, Squid binds the socket to that specific +# address. This replaces the old 'tcp_incoming_address' +# option. Most likely, you do not need to bind to a specific +# address, so you can use the port number alone. +# +# If you are running Squid in accelerator mode, you +# probably want to listen on port 80 also, or instead. +# +# The -a command line option may be used to specify additional +# port(s) where Squid listens for proxy request. Such ports will +# be plain proxy ports with no options. +# +# You may specify multiple socket addresses on multiple lines. +# +# Options: +# +# intercept Support for IP-Layer interception of +# outgoing requests without browser settings. +# NP: disables authentication and IPv6 on the port. +# +# tproxy Support Linux TPROXY for spoofing outgoing +# connections using the client IP address. +# NP: disables authentication and maybe IPv6 on the port. +# +# accel Accelerator mode. Also needs at least one of +# vhost / vport / defaultsite. +# +# allow-direct Allow direct forwarding in accelerator mode. Normally +# accelerated requests are denied direct forwarding as if +# never_direct was used. +# +# defaultsite=domainname +# What to use for the Host: header if it is not present +# in a request. Determines what site (not origin server) +# accelerators should consider the default. +# Implies accel. +# +# vhost Accelerator mode using Host header for virtual domain support. +# Also uses the port as specified in Host: header unless +# overridden by the vport option. Implies accel. +# +# vport Virtual host port support. Using the http_port number +# instead of the port passed on Host: headers. Implies accel. +# +# vport=NN Virtual host port support. Using the specified port +# number instead of the port passed on Host: headers. +# Implies accel. +# +# protocol= Protocol to reconstruct accelerated requests with. +# Defaults to http. +# +# ignore-cc Ignore request Cache-Control headers. +# +# Warning: This option violates HTTP specifications if +# used in non-accelerator setups. +# +# connection-auth[=on|off] +# use connection-auth=off to tell Squid to prevent +# forwarding Microsoft connection oriented authentication +# (NTLM, Negotiate and Kerberos) +# +# disable-pmtu-discovery= +# Control Path-MTU discovery usage: +# off lets OS decide on what to do (default). +# transparent disable PMTU discovery when transparent +# support is enabled. +# always disable always PMTU discovery. +# +# In many setups of transparently intercepting proxies +# Path-MTU discovery can not work on traffic towards the +# clients. This is the case when the intercepting device +# does not fully track connections and fails to forward +# ICMP must fragment messages to the cache server. If you +# have such setup and experience that certain clients +# sporadically hang or never complete requests set +# disable-pmtu-discovery option to 'transparent'. +# +# ssl-bump Intercept each CONNECT request matching ssl_bump ACL, +# establish secure connection with the client and with +# the server, decrypt HTTP messages as they pass through +# Squid, and treat them as unencrypted HTTP messages, +# becoming the man-in-the-middle. +# +# When this option is enabled, additional options become +# available to specify SSL-related properties of the +# client-side connection: cert, key, version, cipher, +# options, clientca, cafile, capath, crlfile, dhparams, +# sslflags, and sslcontext. See the https_port directive +# for more information on these options. +# +# The ssl_bump option is required to fully enable +# the SslBump feature. +# +# name= Specifies a internal name for the port. Defaults to +# the port specification (port or addr:port) +# +# tcpkeepalive[=idle,interval,timeout] +# Enable TCP keepalive probes of idle connections. +# In seconds; idle is the initial time before TCP starts +# probing the connection, interval how often to probe, and +# timeout the time before giving up. +# +# If you run Squid on a dual-homed machine with an internal +# and an external interface we recommend you to specify the +# internal address:port in http_port. This way Squid will only be +# visible on the internal address. +# +# + +# Squid normally listens to port 3128 +http_port 3128 + +# TAG: https_port +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# Usage: [ip:]port cert=certificate.pem [key=key.pem] [options...] +# +# The socket address where Squid will listen for HTTPS client +# requests. +# +# This is really only useful for situations where you are running +# squid in accelerator mode and you want to do the SSL work at the +# accelerator level. +# +# You may specify multiple socket addresses on multiple lines, +# each with their own SSL certificate and/or options. +# +# Options: +# +# accel Accelerator mode. Also needs at least one of +# defaultsite or vhost. +# +# defaultsite= The name of the https site presented on +# this port. Implies accel. +# +# vhost Accelerator mode using Host header for virtual +# domain support. Requires a wildcard certificate +# or other certificate valid for more than one domain. +# Implies accel. +# +# protocol= Protocol to reconstruct accelerated requests with. +# Defaults to https. +# +# cert= Path to SSL certificate (PEM format). +# +# key= Path to SSL private key file (PEM format) +# if not specified, the certificate file is +# assumed to be a combined certificate and +# key file. +# +# version= The version of SSL/TLS supported +# 1 automatic (default) +# 2 SSLv2 only +# 3 SSLv3 only +# 4 TLSv1 only +# +# cipher= Colon separated list of supported ciphers. +# NOTE: some ciphers such as EDH ciphers depend on +# additional settings. If those settings are +# omitted the ciphers may be silently ignored +# by the OpenSSL library. +# +# options= Various SSL engine options. The most important +# being: +# NO_SSLv2 Disallow the use of SSLv2 +# NO_SSLv3 Disallow the use of SSLv3 +# NO_TLSv1 Disallow the use of TLSv1 +# SINGLE_DH_USE Always create a new key when using +# temporary/ephemeral DH key exchanges +# See OpenSSL SSL_CTX_set_options documentation for a +# complete list of options. +# +# clientca= File containing the list of CAs to use when +# requesting a client certificate. +# +# cafile= File containing additional CA certificates to +# use when verifying client certificates. If unset +# clientca will be used. +# +# capath= Directory containing additional CA certificates +# and CRL lists to use when verifying client certificates. +# +# crlfile= File of additional CRL lists to use when verifying +# the client certificate, in addition to CRLs stored in +# the capath. Implies VERIFY_CRL flag below. +# +# dhparams= File containing DH parameters for temporary/ephemeral +# DH key exchanges. See OpenSSL documentation for details +# on how to create this file. +# WARNING: EDH ciphers will be silently disabled if this +# option is not set. +# +# sslflags= Various flags modifying the use of SSL: +# DELAYED_AUTH +# Don't request client certificates +# immediately, but wait until acl processing +# requires a certificate (not yet implemented). +# NO_DEFAULT_CA +# Don't use the default CA lists built in +# to OpenSSL. +# NO_SESSION_REUSE +# Don't allow for session reuse. Each connection +# will result in a new SSL session. +# VERIFY_CRL +# Verify CRL lists when accepting client +# certificates. +# VERIFY_CRL_ALL +# Verify CRL lists for all certificates in the +# client certificate chain. +# +# sslcontext= SSL session ID context identifier. +# +# generate-host-certificates[=] +# Dynamically create SSL server certificates for the +# destination hosts of bumped CONNECT requests.When +# enabled, the cert and key options are used to sign +# generated certificates. Otherwise generated +# certificate will be selfsigned. +# If there is CA certificate life time of generated +# certificate equals lifetime of CA certificate. If +# generated certificate is selfsigned lifetime is three +# years. +# This option is enabled by default when SslBump is used. +# See the sslBump option above for more information. +# +# dynamic_cert_mem_cache_size=SIZE +# Approximate total RAM size spent on cached generated +# certificates. If set to zero, caching is disabled. The +# default value is 4MB. An average XXX-bit certificate +# consumes about XXX bytes of RAM. +# +# vport Accelerator with IP based virtual host support. +# +# vport=NN As above, but uses specified port number rather +# than the https_port number. Implies accel. +# +# name= Specifies a internal name for the port. Defaults to +# the port specification (port or addr:port) +# +#Default: +# none + +# TAG: tcp_outgoing_tos +# Allows you to select a TOS/Diffserv value to mark outgoing +# connections with, based on the username or source address +# making the request. +# +# tcp_outgoing_tos ds-field [!]aclname ... +# +# Example where normal_service_net uses the TOS value 0x00 +# and good_service_net uses 0x20 +# +# acl normal_service_net src 10.0.0.0/24 +# acl good_service_net src 10.0.1.0/24 +# tcp_outgoing_tos 0x00 normal_service_net +# tcp_outgoing_tos 0x20 good_service_net +# +# TOS/DSCP values really only have local significance - so you should +# know what you're specifying. For more information, see RFC2474, +# RFC2475, and RFC3260. +# +# The TOS/DSCP byte must be exactly that - a octet value 0 - 255, or +# "default" to use whatever default your host has. Note that in +# practice often only multiples of 4 is usable as the two rightmost bits +# have been redefined for use by ECN (RFC 3168 section 23.1). +# +# Processing proceeds in the order specified, and stops at first fully +# matching line. +# +# Note: The use of this directive using client dependent ACLs is +# incompatible with the use of server side persistent connections. To +# ensure correct results it is best to set server_persistent_connections +# to off when using this directive in such configurations. +#Default: +# none + +# TAG: clientside_tos +# Allows you to select a TOS/Diffserv value to mark client-side +# connections with, based on the username or source address +# making the request. +#Default: +# none + +# TAG: qos_flows +# Allows you to select a TOS/DSCP value to mark outgoing +# connections with, based on where the reply was sourced. +# +# TOS values really only have local significance - so you should +# know what you're specifying. For more information, see RFC2474, +# RFC2475, and RFC3260. +# +# The TOS/DSCP byte must be exactly that - octet value 0x00-0xFF. +# Note that in practice often only values up to 0x3F are usable +# as the two highest bits have been redefined for use by ECN +# (RFC3168). +# +# This setting is configured by setting the source TOS values: +# +# local-hit=0xFF Value to mark local cache hits. +# +# sibling-hit=0xFF Value to mark hits from sibling peers. +# +# parent-hit=0xFF Value to mark hits from parent peers. +# +# +# NOTE: 'miss' preserve feature is only possible on Linux at this time. +# +# For the following to work correctly, you will need to patch your +# linux kernel with the TOS preserving ZPH patch. +# The kernel patch can be downloaded from http://zph.bratcheda.org +# +# disable-preserve-miss +# By default, the existing TOS value of the response coming +# from the remote server will be retained and masked with +# miss-mark. This option disables that feature. +# +# miss-mask=0xFF +# Allows you to mask certain bits in the TOS received from the +# remote server, before copying the value to the TOS sent +# towards clients. +# Default: 0xFF (TOS from server is not changed). +# +#Default: +# none + +# TAG: tcp_outgoing_address +# Allows you to map requests to different outgoing IP addresses +# based on the username or source address of the user making +# the request. +# +# tcp_outgoing_address ipaddr [[!]aclname] ... +# +# Example where requests from 10.0.0.0/24 will be forwarded +# with source address 10.1.0.1, 10.0.2.0/24 forwarded with +# source address 10.1.0.2 and the rest will be forwarded with +# source address 10.1.0.3. +# +# acl normal_service_net src 10.0.0.0/24 +# acl good_service_net src 10.0.2.0/24 +# tcp_outgoing_address 10.1.0.1 normal_service_net +# tcp_outgoing_address 10.1.0.2 good_service_net +# tcp_outgoing_address 10.1.0.3 +# +# Processing proceeds in the order specified, and stops at first fully +# matching line. +# +# Note: The use of this directive using client dependent ACLs is +# incompatible with the use of server side persistent connections. To +# ensure correct results it is best to set server_persistent_connections +# to off when using this directive in such configurations. +# +# +# IPv6 Magic: +# +# Squid is built with a capability of bridging the IPv4 and IPv6 +# internets. +# tcp_outgoing_address as exampled above breaks this bridging by forcing +# all outbound traffic through a certain IPv4 which may be on the wrong +# side of the IPv4/IPv6 boundary. +# +# To operate with tcp_outgoing_address and keep the bridging benefits +# an additional ACL needs to be used which ensures the IPv6-bound traffic +# is never forced or permitted out the IPv4 interface. +# +# # IPv6 destination test along with a dummy access control to perform the required DNS +# # This MUST be place before any ALLOW rules. +# acl to_ipv6 dst ipv6 +# http_access deny ipv6 !all +# +# tcp_outgoing_address 2001:db8::c001 good_service_net to_ipv6 +# tcp_outgoing_address 10.1.0.2 good_service_net !to_ipv6 +# +# tcp_outgoing_address 2001:db8::beef normal_service_net to_ipv6 +# tcp_outgoing_address 10.1.0.1 normal_service_net !to_ipv6 +# +# tcp_outgoing_address 2001:db8::1 to_ipv6 +# tcp_outgoing_address 10.1.0.3 !to_ipv6 +# +# WARNING: +# 'dst ipv6' bases its selection assuming DIRECT access. +# If peers are used the peername ACL are needed to select outgoing +# address which can link to the peer. +# +# 'dst ipv6' is a slow ACL. It will only work here if 'dst' is used +# previously in the http_access rules to locate the destination IP. +# Some more magic may be needed for that: +# http_access allow to_ipv6 !all +# (meaning, allow if to IPv6 but not from anywhere ;) +# +#Default: +# none + +# SSL OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: ssl_unclean_shutdown +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# Some browsers (especially MSIE) bugs out on SSL shutdown +# messages. +#Default: +# ssl_unclean_shutdown off + +# TAG: ssl_engine +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# The OpenSSL engine to use. You will need to set this if you +# would like to use hardware SSL acceleration for example. +#Default: +# none + +# TAG: sslproxy_client_certificate +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# Client SSL Certificate to use when proxying https:// URLs +#Default: +# none + +# TAG: sslproxy_client_key +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# Client SSL Key to use when proxying https:// URLs +#Default: +# none + +# TAG: sslproxy_version +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# SSL version level to use when proxying https:// URLs +#Default: +# sslproxy_version 1 + +# TAG: sslproxy_options +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# SSL engine options to use when proxying https:// URLs +# +# The most important being: +# +# NO_SSLv2 Disallow the use of SSLv2 +# NO_SSLv3 Disallow the use of SSLv3 +# NO_TLSv1 Disallow the use of TLSv1 +# SINGLE_DH_USE +# Always create a new key when using +# temporary/ephemeral DH key exchanges +# +# These options vary depending on your SSL engine. +# See the OpenSSL SSL_CTX_set_options documentation for a +# complete list of possible options. +#Default: +# none + +# TAG: sslproxy_cipher +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# SSL cipher list to use when proxying https:// URLs +# +# Colon separated list of supported ciphers. +#Default: +# none + +# TAG: sslproxy_cafile +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# file containing CA certificates to use when verifying server +# certificates while proxying https:// URLs +#Default: +# none + +# TAG: sslproxy_capath +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# directory containing CA certificates to use when verifying +# server certificates while proxying https:// URLs +#Default: +# none + +# TAG: ssl_bump +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# This ACL controls which CONNECT requests to an http_port +# marked with an sslBump flag are actually "bumped". Please +# see the sslBump flag of an http_port option for more details +# about decoding proxied SSL connections. +# +# By default, no requests are bumped. +# +# See also: http_port ssl-bump +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +# +# # Example: Bump all requests except those originating from localhost and +# # those going to webax.com or example.com sites. +# +# acl localhost src 127.0.0.1/32 +# acl broken_sites dstdomain .webax.com +# acl broken_sites dstdomain .example.com +# ssl_bump deny localhost +# ssl_bump deny broken_sites +# ssl_bump allow all +#Default: +# none + +# TAG: sslproxy_flags +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# Various flags modifying the use of SSL while proxying https:// URLs: +# DONT_VERIFY_PEER Accept certificates that fail verification. +# For refined control, see sslproxy_cert_error. +# NO_DEFAULT_CA Don't use the default CA list built in +# to OpenSSL. +#Default: +# none + +# TAG: sslproxy_cert_error +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# Use this ACL to bypass server certificate validation errors. +# +# For example, the following lines will bypass all validation errors +# when talking to servers located at 172.16.0.0/16. All other +# validation errors will result in ERR_SECURE_CONNECT_FAIL error. +# +# acl BrokenServersAtTrustedIP dst 172.16.0.0/16 +# sslproxy_cert_error allow BrokenServersAtTrustedIP +# sslproxy_cert_error deny all +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# Using slow acl types may result in server crashes +# +# Without this option, all server certificate validation errors +# terminate the transaction. Bypassing validation errors is dangerous +# because an error usually implies that the server cannot be trusted and +# the connection may be insecure. +# +# See also: sslproxy_flags and DONT_VERIFY_PEER. +# +# Default setting: sslproxy_cert_error deny all +#Default: +# none + +# TAG: sslpassword_program +# Note: This option is only available if Squid is rebuilt with the +# --enable-ssl option +# +# Specify a program used for entering SSL key passphrases +# when using encrypted SSL certificate keys. If not specified +# keys must either be unencrypted, or Squid started with the -N +# option to allow it to query interactively for the passphrase. +# +# The key file name is given as argument to the program allowing +# selection of the right password if you have multiple encrypted +# keys. +#Default: +# none + +#OPTIONS RELATING TO EXTERNAL SSL_CRTD +#----------------------------------------------------------------------------- + +# TAG: sslcrtd_program +# Note: This option is only available if Squid is rebuilt with the +# -DUSE_SSL_CRTD define +# +# Specify the location and options of the executable for ssl_crtd process. +# /usr/lib/squid/ssl_crtd program requires -s and -M parameters +# For more information use: +# /usr/lib/squid/ssl_crtd -h +#Default: +# sslcrtd_program /usr/lib/squid/ssl_crtd -s /var/lib/ssl_db -M 4MB + +# TAG: sslcrtd_children +# Note: This option is only available if Squid is rebuilt with the +# -DUSE_SSL_CRTD define +# +# The maximum number of processes spawn to service ssl server. +# The maximum this may be safely set to is 32. +# +# You must have at least one ssl_crtd process. +#Default: +# sslcrtd_children 5 + +# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM +# ----------------------------------------------------------------------------- + +# TAG: cache_peer +# To specify other caches in a hierarchy, use the format: +# +# cache_peer hostname type http-port icp-port [options] +# +# For example, +# +# # proxy icp +# # hostname type port port options +# # -------------------- -------- ----- ----- ----------- +# cache_peer parent.foo.net parent 3128 3130 default +# cache_peer sib1.foo.net sibling 3128 3130 proxy-only +# cache_peer sib2.foo.net sibling 3128 3130 proxy-only +# cache_peer example.com parent 80 0 default +# cache_peer cdn.example.com sibling 3128 0 +# +# type: either 'parent', 'sibling', or 'multicast'. +# +# proxy-port: The port number where the peer accept HTTP requests. +# For other Squid proxies this is usually 3128 +# For web servers this is usually 80 +# +# icp-port: Used for querying neighbor caches about objects. +# Set to 0 if the peer does not support ICP or HTCP. +# See ICP and HTCP options below for additional details. +# +# +# ==== ICP OPTIONS ==== +# +# You MUST also set icp_port and icp_access explicitly when using these options. +# The defaults will prevent peer traffic using ICP. +# +# +# no-query Disable ICP queries to this neighbor. +# +# multicast-responder +# Indicates the named peer is a member of a multicast group. +# ICP queries will not be sent directly to the peer, but ICP +# replies will be accepted from it. +# +# closest-only Indicates that, for ICP_OP_MISS replies, we'll only forward +# CLOSEST_PARENT_MISSes and never FIRST_PARENT_MISSes. +# +# background-ping +# To only send ICP queries to this neighbor infrequently. +# This is used to keep the neighbor round trip time updated +# and is usually used in conjunction with weighted-round-robin. +# +# +# ==== HTCP OPTIONS ==== +# +# You MUST also set htcp_port and htcp_access explicitly when using these options. +# The defaults will prevent peer traffic using HTCP. +# +# +# htcp Send HTCP, instead of ICP, queries to the neighbor. +# You probably also want to set the "icp-port" to 4827 +# instead of 3130. +# +# htcp-oldsquid Send HTCP to old Squid versions. +# +# htcp-no-clr Send HTCP to the neighbor but without +# sending any CLR requests. This cannot be used with +# htcp-only-clr. +# +# htcp-only-clr Send HTCP to the neighbor but ONLY CLR requests. +# This cannot be used with htcp-no-clr. +# +# htcp-no-purge-clr +# Send HTCP to the neighbor including CLRs but only when +# they do not result from PURGE requests. +# +# htcp-forward-clr +# Forward any HTCP CLR requests this proxy receives to the peer. +# +# +# ==== PEER SELECTION METHODS ==== +# +# The default peer selection method is ICP, with the first responding peer +# being used as source. These options can be used for better load balancing. +# +# +# default This is a parent cache which can be used as a "last-resort" +# if a peer cannot be located by any of the peer-selection methods. +# If specified more than once, only the first is used. +# +# round-robin Load-Balance parents which should be used in a round-robin +# fashion in the absence of any ICP queries. +# weight=N can be used to add bias. +# +# weighted-round-robin +# Load-Balance parents which should be used in a round-robin +# fashion with the frequency of each parent being based on the +# round trip time. Closer parents are used more often. +# Usually used for background-ping parents. +# weight=N can be used to add bias. +# +# carp Load-Balance parents which should be used as a CARP array. +# The requests will be distributed among the parents based on the +# CARP load balancing hash function based on their weight. +# +# userhash Load-balance parents based on the client proxy_auth or ident username. +# +# sourcehash Load-balance parents based on the client source IP. +# +# multicast-siblings +# To be used only for cache peers of type "multicast". +# ALL members of this multicast group have "sibling" +# relationship with it, not "parent". This is to a multicast +# group when the requested object would be fetched only from +# a "parent" cache, anyway. It's useful, e.g., when +# configuring a pool of redundant Squid proxies, being +# members of the same multicast group. +# +# +# ==== PEER SELECTION OPTIONS ==== +# +# weight=N use to affect the selection of a peer during any weighted +# peer-selection mechanisms. +# The weight must be an integer; default is 1, +# larger weights are favored more. +# This option does not affect parent selection if a peering +# protocol is not in use. +# +# basetime=N Specify a base amount to be subtracted from round trip +# times of parents. +# It is subtracted before division by weight in calculating +# which parent to fectch from. If the rtt is less than the +# base time the rtt is set to a minimal value. +# +# ttl=N Specify a TTL to use when sending multicast ICP queries +# to this address. +# Only useful when sending to a multicast group. +# Because we don't accept ICP replies from random +# hosts, you must configure other group members as +# peers with the 'multicast-responder' option. +# +# no-delay To prevent access to this neighbor from influencing the +# delay pools. +# +# digest-url=URL Tell Squid to fetch the cache digest (if digests are +# enabled) for this host from the specified URL rather +# than the Squid default location. +# +# +# ==== ACCELERATOR / REVERSE-PROXY OPTIONS ==== +# +# originserver Causes this parent to be contacted as an origin server. +# Meant to be used in accelerator setups when the peer +# is a web server. +# +# forceddomain=name +# Set the Host header of requests forwarded to this peer. +# Useful in accelerator setups where the server (peer) +# expects a certain domain name but clients may request +# others. ie example.com or www.example.com +# +# no-digest Disable request of cache digests. +# +# no-netdb-exchange +# Disables requesting ICMP RTT database (NetDB). +# +# +# ==== AUTHENTICATION OPTIONS ==== +# +# login=user:password +# If this is a personal/workgroup proxy and your parent +# requires proxy authentication. +# +# Note: The string can include URL escapes (i.e. %20 for +# spaces). This also means % must be written as %%. +# +# login=PROXYPASS +# Send login details received from client to this peer. +# Authentication is not required, nor changed. +# +# Note: This will pass any form of authentication but +# only Basic auth will work through a proxy unless the +# connection-auth options are also used. +# +# login=PASS Send login details received from client to this peer. +# Authentication is not required by this option. +# If there are no client-provided authentication headers +# to pass on, but username and password are available +# from either proxy login or an external ACL user= and +# password= result tags they may be sent instead. +# +# Note: To combine this with proxy_auth both proxies must +# share the same user database as HTTP only allows for +# a single login (one for proxy, one for origin server). +# Also be warned this will expose your users proxy +# password to the peer. USE WITH CAUTION +# +# login=*:password +# Send the username to the upstream cache, but with a +# fixed password. This is meant to be used when the peer +# is in another administrative domain, but it is still +# needed to identify each user. +# The star can optionally be followed by some extra +# information which is added to the username. This can +# be used to identify this proxy to the peer, similar to +# the login=username:password option above. +# +# connection-auth=on|off +# Tell Squid that this peer does or not support Microsoft +# connection oriented authentication, and any such +# challenges received from there should be ignored. +# Default is auto to automatically determine the status +# of the peer. +# +# +# ==== SSL / HTTPS / TLS OPTIONS ==== +# +# ssl Encrypt connections to this peer with SSL/TLS. +# +# sslcert=/path/to/ssl/certificate +# A client SSL certificate to use when connecting to +# this peer. +# +# sslkey=/path/to/ssl/key +# The private SSL key corresponding to sslcert above. +# If 'sslkey' is not specified 'sslcert' is assumed to +# reference a combined file containing both the +# certificate and the key. +# +# sslversion=1|2|3|4 +# The SSL version to use when connecting to this peer +# 1 = automatic (default) +# 2 = SSL v2 only +# 3 = SSL v3 only +# 4 = TLS v1 only +# +# sslcipher=... The list of valid SSL ciphers to use when connecting +# to this peer. +# +# ssloptions=... Specify various SSL engine options: +# NO_SSLv2 Disallow the use of SSLv2 +# NO_SSLv3 Disallow the use of SSLv3 +# NO_TLSv1 Disallow the use of TLSv1 +# See src/ssl_support.c or the OpenSSL documentation for +# a more complete list. +# +# sslcafile=... A file containing additional CA certificates to use +# when verifying the peer certificate. +# +# sslcapath=... A directory containing additional CA certificates to +# use when verifying the peer certificate. +# +# sslcrlfile=... A certificate revocation list file to use when +# verifying the peer certificate. +# +# sslflags=... Specify various flags modifying the SSL implementation: +# +# DONT_VERIFY_PEER +# Accept certificates even if they fail to +# verify. +# NO_DEFAULT_CA +# Don't use the default CA list built in +# to OpenSSL. +# DONT_VERIFY_DOMAIN +# Don't verify the peer certificate +# matches the server name +# +# ssldomain= The peer name as advertised in it's certificate. +# Used for verifying the correctness of the received peer +# certificate. If not specified the peer hostname will be +# used. +# +# front-end-https +# Enable the "Front-End-Https: On" header needed when +# using Squid as a SSL frontend in front of Microsoft OWA. +# See MS KB document Q307347 for details on this header. +# If set to auto the header will only be added if the +# request is forwarded as a https:// URL. +# +# +# ==== GENERAL OPTIONS ==== +# +# connect-timeout=N +# A peer-specific connect timeout. +# Also see the peer_connect_timeout directive. +# +# connect-fail-limit=N +# How many times connecting to a peer must fail before +# it is marked as down. Default is 10. +# +# allow-miss Disable Squid's use of only-if-cached when forwarding +# requests to siblings. This is primarily useful when +# icp_hit_stale is used by the sibling. To extensive use +# of this option may result in forwarding loops, and you +# should avoid having two-way peerings with this option. +# For example to deny peer usage on requests from peer +# by denying cache_peer_access if the source is a peer. +# +# max-conn=N Limit the amount of connections Squid may open to this +# peer. see also +# +# name=xxx Unique name for the peer. +# Required if you have multiple peers on the same host +# but different ports. +# This name can be used in cache_peer_access and similar +# directives to dentify the peer. +# Can be used by outgoing access controls through the +# peername ACL type. +# +# no-tproxy Do not use the client-spoof TPROXY support when forwarding +# requests to this peer. Use normal address selection instead. +# +# proxy-only objects fetched from the peer will not be stored locally. +# +#Default: +# none + +# TAG: cache_peer_domain +# Use to limit the domains for which a neighbor cache will be +# queried. Usage: +# +# cache_peer_domain cache-host domain [domain ...] +# cache_peer_domain cache-host !domain +# +# For example, specifying +# +# cache_peer_domain parent.foo.net .edu +# +# has the effect such that UDP query packets are sent to +# 'bigserver' only when the requested object exists on a +# server in the .edu domain. Prefixing the domainname +# with '!' means the cache will be queried for objects +# NOT in that domain. +# +# NOTE: * Any number of domains may be given for a cache-host, +# either on the same or separate lines. +# * When multiple domains are given for a particular +# cache-host, the first matched domain is applied. +# * Cache hosts with no domain restrictions are queried +# for all requests. +# * There are no defaults. +# * There is also a 'cache_peer_access' tag in the ACL +# section. +#Default: +# none + +# TAG: cache_peer_access +# Similar to 'cache_peer_domain' but provides more flexibility by +# using ACL elements. +# +# cache_peer_access cache-host allow|deny [!]aclname ... +# +# The syntax is identical to 'http_access' and the other lists of +# ACL elements. See the comments for 'http_access' below, or +# the Squid FAQ (http://wiki.squid-cache.org/SquidFaq/SquidAcl). +#Default: +# none + +# TAG: neighbor_type_domain +# usage: neighbor_type_domain neighbor parent|sibling domain domain ... +# +# Modifying the neighbor type for specific domains is now +# possible. You can treat some domains differently than the the +# default neighbor type specified on the 'cache_peer' line. +# Normally it should only be necessary to list domains which +# should be treated differently because the default neighbor type +# applies for hostnames which do not match domains listed here. +# +#EXAMPLE: +# cache_peer cache.foo.org parent 3128 3130 +# neighbor_type_domain cache.foo.org sibling .com .net +# neighbor_type_domain cache.foo.org sibling .au .de +#Default: +# none + +# TAG: dead_peer_timeout (seconds) +# This controls how long Squid waits to declare a peer cache +# as "dead." If there are no ICP replies received in this +# amount of time, Squid will declare the peer dead and not +# expect to receive any further ICP replies. However, it +# continues to send ICP queries, and will mark the peer as +# alive upon receipt of the first subsequent ICP reply. +# +# This timeout also affects when Squid expects to receive ICP +# replies from peers. If more than 'dead_peer' seconds have +# passed since the last ICP reply was received, Squid will not +# expect to receive an ICP reply on the next query. Thus, if +# your time between requests is greater than this timeout, you +# will see a lot of requests sent DIRECT to origin servers +# instead of to your parents. +#Default: +# dead_peer_timeout 10 seconds + +# TAG: forward_max_tries +# Controls how many different forward paths Squid will try +# before giving up. See also forward_timeout. +#Default: +# forward_max_tries 10 + +# TAG: hierarchy_stoplist +# A list of words which, if found in a URL, cause the object to +# be handled directly by this cache. In other words, use this +# to not query neighbor caches for certain objects. You may +# list this option multiple times. +# +# Example: +# hierarchy_stoplist cgi-bin ? +# +# Note: never_direct overrides this option. +#Default: +# none + +# MEMORY CACHE OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: cache_mem (bytes) +# NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE. +# IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL +# USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER +# THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS. +# +# 'cache_mem' specifies the ideal amount of memory to be used +# for: +# * In-Transit objects +# * Hot Objects +# * Negative-Cached objects +# +# Data for these objects are stored in 4 KB blocks. This +# parameter specifies the ideal upper limit on the total size of +# 4 KB blocks allocated. In-Transit objects take the highest +# priority. +# +# In-transit objects have priority over the others. When +# additional space is needed for incoming data, negative-cached +# and hot objects will be released. In other words, the +# negative-cached and hot objects will fill up any unused space +# not needed for in-transit objects. +# +# If circumstances require, this limit will be exceeded. +# Specifically, if your incoming request rate requires more than +# 'cache_mem' of memory to hold in-transit objects, Squid will +# exceed this limit to satisfy the new requests. When the load +# decreases, blocks will be freed until the high-water mark is +# reached. Thereafter, blocks will be used to store hot +# objects. +#Default: +# cache_mem 256 MB + +# TAG: maximum_object_size_in_memory (bytes) +# Objects greater than this size will not be attempted to kept in +# the memory cache. This should be set high enough to keep objects +# accessed frequently in memory to improve performance whilst low +# enough to keep larger objects from hoarding cache_mem. +#Default: +# maximum_object_size_in_memory 512 KB + +# TAG: memory_replacement_policy +# The memory replacement policy parameter determines which +# objects are purged from memory when memory space is needed. +# +# See cache_replacement_policy for details. +#Default: +# memory_replacement_policy lru + +# DISK CACHE OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: cache_replacement_policy +# The cache replacement policy parameter determines which +# objects are evicted (replaced) when disk space is needed. +# +# lru : Squid's original list based LRU policy +# heap GDSF : Greedy-Dual Size Frequency +# heap LFUDA: Least Frequently Used with Dynamic Aging +# heap LRU : LRU policy implemented using a heap +# +# Applies to any cache_dir lines listed below this. +# +# The LRU policies keeps recently referenced objects. +# +# The heap GDSF policy optimizes object hit rate by keeping smaller +# popular objects in cache so it has a better chance of getting a +# hit. It achieves a lower byte hit rate than LFUDA though since +# it evicts larger (possibly popular) objects. +# +# The heap LFUDA policy keeps popular objects in cache regardless of +# their size and thus optimizes byte hit rate at the expense of +# hit rate since one large, popular object will prevent many +# smaller, slightly less popular objects from being cached. +# +# Both policies utilize a dynamic aging mechanism that prevents +# cache pollution that can otherwise occur with frequency-based +# replacement policies. +# +# NOTE: if using the LFUDA replacement policy you should increase +# the value of maximum_object_size above its default of 4096 KB to +# to maximize the potential byte hit rate improvement of LFUDA. +# +# For more information about the GDSF and LFUDA cache replacement +# policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html +# and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html. +#Default: +# cache_replacement_policy lru + +# TAG: cache_dir +# Usage: +# +# cache_dir Type Directory-Name Fs-specific-data [options] +# +# You can specify multiple cache_dir lines to spread the +# cache among different disk partitions. +# +# Type specifies the kind of storage system to use. Only "ufs" +# is built by default. To enable any of the other storage systems +# see the --enable-storeio configure option. +# +# 'Directory' is a top-level directory where cache swap +# files will be stored. If you want to use an entire disk +# for caching, this can be the mount-point directory. +# The directory must exist and be writable by the Squid +# process. Squid will NOT create this directory for you. +# +# The ufs store type: +# +# "ufs" is the old well-known Squid storage format that has always +# been there. +# +# cache_dir ufs Directory-Name Mbytes L1 L2 [options] +# +# 'Mbytes' is the amount of disk space (MB) to use under this +# directory. The default is 100 MB. Change this to suit your +# configuration. Do NOT put the size of your disk drive here. +# Instead, if you want Squid to use the entire disk drive, +# subtract 20% and use that value. +# +# 'L1' is the number of first-level subdirectories which +# will be created under the 'Directory'. The default is 16. +# +# 'L2' is the number of second-level subdirectories which +# will be created under each first-level directory. The default +# is 256. +# +# The aufs store type: +# +# "aufs" uses the same storage format as "ufs", utilizing +# POSIX-threads to avoid blocking the main Squid process on +# disk-I/O. This was formerly known in Squid as async-io. +# +# cache_dir aufs Directory-Name Mbytes L1 L2 [options] +# +# see argument descriptions under ufs above +# +# The diskd store type: +# +# "diskd" uses the same storage format as "ufs", utilizing a +# separate process to avoid blocking the main Squid process on +# disk-I/O. +# +# cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n] +# +# see argument descriptions under ufs above +# +# Q1 specifies the number of unacknowledged I/O requests when Squid +# stops opening new files. If this many messages are in the queues, +# Squid won't open new files. Default is 64 +# +# Q2 specifies the number of unacknowledged messages when Squid +# starts blocking. If this many messages are in the queues, +# Squid blocks until it receives some replies. Default is 72 +# +# When Q1 < Q2 (the default), the cache directory is optimized +# for lower response time at the expense of a decrease in hit +# ratio. If Q1 > Q2, the cache directory is optimized for +# higher hit ratio at the expense of an increase in response +# time. +# +# The coss store type: +# +# NP: COSS filesystem in Squid-3 has been deemed too unstable for +# production use and has thus been removed from this release. +# We hope that it can be made usable again soon. +# +# block-size=n defines the "block size" for COSS cache_dir's. +# Squid uses file numbers as block numbers. Since file numbers +# are limited to 24 bits, the block size determines the maximum +# size of the COSS partition. The default is 512 bytes, which +# leads to a maximum cache_dir size of 512<<24, or 8 GB. Note +# you should not change the coss block size after Squid +# has written some objects to the cache_dir. +# +# The coss file store has changed from 2.5. Now it uses a file +# called 'stripe' in the directory names in the config - and +# this will be created by squid -z. +# +# Common options: +# +# no-store, no new objects should be stored to this cache_dir +# +# max-size=n, refers to the max object size in bytes this cache_dir +# supports. It is used to select the cache_dir to store the object. +# Note: To make optimal use of the max-size limits you should order +# the cache_dir lines with the smallest max-size value first and the +# ones with no max-size specification last. +# +# Note for coss, max-size must be less than COSS_MEMBUF_SZ, +# which can be changed with the --with-coss-membuf-size=N configure +# option. +# + +# Uncomment and adjust the following to add a disk cache directory. +#cache_dir ufs /var/spool/squid 100 16 256 +cache_dir ufs /var/spool/squid 8192 16 1024 + +# TAG: store_dir_select_algorithm +# Set this to 'round-robin' as an alternative. +#Default: +# store_dir_select_algorithm least-load + +# TAG: max_open_disk_fds +# To avoid having disk as the I/O bottleneck Squid can optionally +# bypass the on-disk cache if more than this amount of disk file +# descriptors are open. +# +# A value of 0 indicates no limit. +#Default: +# max_open_disk_fds 0 + +# TAG: minimum_object_size (bytes) +# Objects smaller than this size will NOT be saved on disk. The +# value is specified in kilobytes, and the default is 0 KB, which +# means there is no minimum. +#Default: +# minimum_object_size 0 KB + +# TAG: maximum_object_size (bytes) +# Objects larger than this size will NOT be saved on disk. The +# value is specified in kilobytes, and the default is 4MB. If +# you wish to get a high BYTES hit ratio, you should probably +# increase this (one 32 MB object hit counts for 3200 10KB +# hits). If you wish to increase speed more than your want to +# save bandwidth you should leave this low. +# +# NOTE: if using the LFUDA replacement policy you should increase +# this value to maximize the byte hit rate improvement of LFUDA! +# See replacement_policy below for a discussion of this policy. +#Default: +# maximum_object_size 4096 KB +maximum_object_size 153600 KB + +# TAG: cache_swap_low (percent, 0-100) +#Default: +# cache_swap_low 90 + +# TAG: cache_swap_high (percent, 0-100) +# +# The low- and high-water marks for cache object replacement. +# Replacement begins when the swap (disk) usage is above the +# low-water mark and attempts to maintain utilization near the +# low-water mark. As swap utilization gets close to high-water +# mark object eviction becomes more aggressive. If utilization is +# close to the low-water mark less replacement is done each time. +# +# Defaults are 90% and 95%. If you have a large cache, 5% could be +# hundreds of MB. If this is the case you may wish to set these +# numbers closer together. +#Default: +# cache_swap_high 95 + +# LOGFILE OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: logformat +# Usage: +# +# logformat +# +# Defines an access log format. +# +# The is a string with embedded % format codes +# +# % format codes all follow the same basic structure where all but +# the formatcode is optional. Output strings are automatically escaped +# as required according to their context and the output format +# modifiers are usually not needed, but can be specified if an explicit +# output format is desired. +# +# % ["|[|'|#] [-] [[0]width] [{argument}] formatcode +# +# " output in quoted string format +# [ output in squid text log format as used by log_mime_hdrs +# # output in URL quoted format +# ' output as-is +# +# - left aligned +# width field width. If starting with 0 the +# output is zero padded +# {arg} argument such as header name etc +# +# Format codes: +# +# % a literal % character +# >a Client source IP address +# >A Client FQDN +# >p Client source port +# h Original request header. Optional header name argument +# on the format header[:[separator]element] +# [http::]>ha The HTTP request headers after adaptation and redirection. +# Optional header name argument as for >h +# [http::]h +# [http::]un User name +# [http::]ul User name from authentication +# [http::]ui User name from ident +# [http::]us User name from SSL +# [http::]ue User name from external acl helper +# [http::]>Hs HTTP status code sent to the client +# [http::]st Received request size including HTTP headers. In the +# case of chunked requests the chunked encoding metadata +# are not included +# [http::]>sh Received HTTP request headers size +# [http::]a %Ss/%03>Hs %a %Ss/%03>Hs %h] [%a %ui %un [%tl] "%rm %ru HTTP/%rv" %>Hs %a %ui %un [%tl] "%rm %ru HTTP/%rv" %>Hs %h" "%{User-Agent}>h" %Ss:%Sh +#Default: +# none + +# TAG: access_log +# These files log client request activities. Has a line every HTTP or +# ICP request. The format is: +# access_log [ [acl acl ...]] +# access_log none [acl acl ...]] +# +# Will log to the specified file using the specified format (which +# must be defined in a logformat directive) those entries which match +# ALL the acl's specified (which must be defined in acl clauses). +# +# If no acl is specified, all requests will be logged to this file. +# +# To disable logging of a request use the filepath "none", in which case +# a logformat name should not be specified. +# +# To log the request via syslog specify a filepath of "syslog": +# +# access_log syslog[:facility.priority] [format [acl1 [acl2 ....]]] +# where facility could be any of: +# authpriv, daemon, local0 .. local7 or user. +# +# And priority could be any of: +# err, warning, notice, info, debug. +# +# Default: +# access_log /var/log/squid/access.log squid +#Default: +# access_log /var/log/squid/access.log squid + +# TAG: icap_log +# ICAP log files record ICAP transaction summaries, one line per +# transaction. +# +# The icap_log option format is: +# icap_log [ [acl acl ...]] +# icap_log none [acl acl ...]] +# +# Please see access_log option documentation for details. The two +# kinds of logs share the overall configuration approach and many +# features. +# +# ICAP processing of a single HTTP message or transaction may +# require multiple ICAP transactions. In such cases, multiple +# ICAP transaction log lines will correspond to a single access +# log line. +# +# ICAP log uses logformat codes that make sense for an ICAP +# transaction. Header-related codes are applied to the HTTP header +# embedded in an ICAP server response, with the following caveats: +# For REQMOD, there is no HTTP response header unless the ICAP +# server performed request satisfaction. For RESPMOD, the HTTP +# request header is the header sent to the ICAP server. For +# OPTIONS, there are no HTTP headers. +# +# The following format codes are also available for ICAP logs: +# +# icap::st Bytes sent to the ICAP server (TCP payload +# only; i.e., what Squid writes to the socket). +# +# icap::h ICAP request header(s). Similar to >h. +# +# icap::a %icap::to/%03icap::Hs %icap::'. +# +# Note, from Squid-3.1 this option has no effect on the cache.log, +# that log can be rotated separately by using debug_options +# +# Note2, for Debian/Linux the default of logfile_rotate is +# zero, since it includes external logfile-rotation methods. +#Default: +# logfile_rotate 0 + +# TAG: emulate_httpd_log on|off +# The Cache can emulate the log file format which many 'httpd' +# programs use. To disable/enable this emulation, set +# emulate_httpd_log to 'off' or 'on'. The default +# is to use the native log format since it includes useful +# information Squid-specific log analyzers use. +#Default: +# emulate_httpd_log off + +# TAG: log_ip_on_direct on|off +# Log the destination IP address in the hierarchy log tag when going +# direct. Earlier Squid versions logged the hostname here. If you +# prefer the old way set this to off. +#Default: +# log_ip_on_direct on + +# TAG: mime_table +# Pathname to Squid's MIME table. You shouldn't need to change +# this, but the default file contains examples and formatting +# information if you do. +#Default: +# mime_table /usr/share/squid/mime.conf + +# TAG: log_mime_hdrs on|off +# The Cache can record both the request and the response MIME +# headers for each HTTP transaction. The headers are encoded +# safely and will appear as two bracketed fields at the end of +# the access log (for either the native or httpd-emulated log +# formats). To enable this logging set log_mime_hdrs to 'on'. +#Default: +# log_mime_hdrs off + +# TAG: useragent_log +# Note: This option is only available if Squid is rebuilt with the +# --enable-useragent-log option +# +# Squid will write the User-Agent field from HTTP requests +# to the filename specified here. By default useragent_log +# is disabled. +#Default: +# none + +# TAG: referer_log +# Note: This option is only available if Squid is rebuilt with the +# --enable-referer-log option +# +# Squid will write the Referer field from HTTP requests to the +# filename specified here. By default referer_log is disabled. +# Note that "referer" is actually a misspelling of "referrer" +# however the misspelt version has been accepted into the HTTP RFCs +# and we accept both. +#Default: +# none + +# TAG: pid_filename +# A filename to write the process-id to. To disable, enter "none". +#Default: +# pid_filename /var/run/squid.pid + +# TAG: log_fqdn on|off +# Turn this on if you wish to log fully qualified domain names +# in the access.log. To do this Squid does a DNS lookup of all +# IP's connecting to it. This can (in some situations) increase +# latency, which makes your cache seem slower for interactive +# browsing. +#Default: +# log_fqdn off + +# TAG: client_netmask +# A netmask for client addresses in logfiles and cachemgr output. +# Change this to protect the privacy of your cache clients. +# A netmask of 255.255.255.0 will log all IP's in that range with +# the last digit set to '0'. +#Default: +# client_netmask no_addr + +# TAG: forward_log +# Note: This option is only available if Squid is rebuilt with the +# -DWIP_FWD_LOG define +# +# Logs the server-side requests. +# +# This is currently work in progress. +#Default: +# none + +# TAG: strip_query_terms +# By default, Squid strips query terms from requested URLs before +# logging. This protects your user's privacy. +#Default: +# strip_query_terms on + +# TAG: buffered_logs on|off +# cache.log log file is written with stdio functions, and as such +# it can be buffered or unbuffered. By default it will be unbuffered. +# Buffering it can speed up the writing slightly (though you are +# unlikely to need to worry unless you run with tons of debugging +# enabled in which case performance will suffer badly anyway..). +#Default: +# buffered_logs off + +# TAG: netdb_filename +# Note: This option is only available if Squid is rebuilt with the +# --enable-icmp option +# +# A filename where Squid stores it's netdb state between restarts. +# To disable, enter "none". +#Default: +# netdb_filename /var/log/squid/netdb.state + +# OPTIONS FOR TROUBLESHOOTING +# ----------------------------------------------------------------------------- + +# TAG: cache_log +# Cache logging file. This is where general information about +# your cache's behavior goes. You can increase the amount of data +# logged to this file and how often its rotated with "debug_options" +#Default: +# cache_log /var/log/squid/cache.log + +# TAG: debug_options +# Logging options are set as section,level where each source file +# is assigned a unique section. Lower levels result in less +# output, Full debugging (level 9) can result in a very large +# log file, so be careful. +# +# The magic word "ALL" sets debugging levels for all sections. +# We recommend normally running with "ALL,1". +# +# The rotate=N option can be used to keep more or less of these logs +# than would otherwise be kept by logfile_rotate. +# For most uses a single log should be enough to monitor current +# events affecting Squid. +#Default: +# debug_options ALL,1 + +# TAG: coredump_dir +# By default Squid leaves core files in the directory from where +# it was started. If you set 'coredump_dir' to a directory +# that exists, Squid will chdir() to that directory at startup +# and coredump files will be left there. +# +#Default: +# coredump_dir none +# + +# Leave coredumps in the first cache dir +coredump_dir /var/spool/squid + +# OPTIONS FOR FTP GATEWAYING +# ----------------------------------------------------------------------------- + +# TAG: ftp_user +# If you want the anonymous login password to be more informative +# (and enable the use of picky ftp servers), set this to something +# reasonable for your domain, like wwwuser@somewhere.net +# +# The reason why this is domainless by default is the +# request can be made on the behalf of a user in any domain, +# depending on how the cache is used. +# Some ftp server also validate the email address is valid +# (for example perl.com). +#Default: +# ftp_user Squid@ + +# TAG: ftp_list_width +# Sets the width of ftp listings. This should be set to fit in +# the width of a standard browser. Setting this too small +# can cut off long filenames when browsing ftp sites. +#Default: +# ftp_list_width 32 + +# TAG: ftp_passive +# If your firewall does not allow Squid to use passive +# connections, turn off this option. +# +# Use of ftp_epsv_all option requires this to be ON. +#Default: +# ftp_passive on + +# TAG: ftp_epsv_all +# FTP Protocol extensions permit the use of a special "EPSV ALL" command. +# +# NATs may be able to put the connection on a "fast path" through the +# translator, as the EPRT command will never be used and therefore, +# translation of the data portion of the segments will never be needed. +# +# When a client only expects to do two-way FTP transfers this may be +# useful. +# If squid finds that it must do a three-way FTP transfer after issuing +# an EPSV ALL command, the FTP session will fail. +# +# If you have any doubts about this option do not use it. +# Squid will nicely attempt all other connection methods. +# +# Requires ftp_passive to be ON (default) for any effect. +#Default: +# ftp_epsv_all off + +# TAG: ftp_epsv +# FTP Protocol extensions permit the use of a special "EPSV" command. +# +# NATs may be able to put the connection on a "fast path" through the +# translator using EPSV, as the EPRT command will never be used +# and therefore, translation of the data portion of the segments +# will never be needed. +# +# Turning this OFF will prevent EPSV being attempted. +# WARNING: Doing so will convert Squid back to the old behavior with all +# the related problems with external NAT devices/layers. +# +# Requires ftp_passive to be ON (default) for any effect. +#Default: +# ftp_epsv on + +# TAG: ftp_eprt +# FTP Protocol extensions permit the use of a special "EPRT" command. +# +# This extension provides a protocol neutral alternative to the +# IPv4-only PORT command. When supported it enables active FTP data +# channels over IPv6 and efficient NAT handling. +# +# Turning this OFF will prevent EPRT being attempted and will skip +# straight to using PORT for IPv4 servers. +# +# Some devices are known to not handle this extension correctly and +# may result in crashes. Devices which suport EPRT enough to fail +# cleanly will result in Squid attempting PORT anyway. This directive +# should only be disabled when EPRT results in device failures. +# +# WARNING: Doing so will convert Squid back to the old behavior with all +# the related problems with external NAT devices/layers and IPv4-only FTP. +#Default: +# ftp_eprt on + +# TAG: ftp_sanitycheck +# For security and data integrity reasons Squid by default performs +# sanity checks of the addresses of FTP data connections ensure the +# data connection is to the requested server. If you need to allow +# FTP connections to servers using another IP address for the data +# connection turn this off. +#Default: +# ftp_sanitycheck on + +# TAG: ftp_telnet_protocol +# The FTP protocol is officially defined to use the telnet protocol +# as transport channel for the control connection. However, many +# implementations are broken and does not respect this aspect of +# the FTP protocol. +# +# If you have trouble accessing files with ASCII code 255 in the +# path or similar problems involving this ASCII code you can +# try setting this directive to off. If that helps, report to the +# operator of the FTP server in question that their FTP server +# is broken and does not follow the FTP standard. +#Default: +# ftp_telnet_protocol on + +# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS +# ----------------------------------------------------------------------------- + +# TAG: diskd_program +# Specify the location of the diskd executable. +# Note this is only useful if you have compiled in +# diskd as one of the store io modules. +#Default: +# diskd_program /usr/lib/squid/diskd + +# TAG: unlinkd_program +# Specify the location of the executable for file deletion process. +#Default: +# unlinkd_program /usr/lib/squid/unlinkd + +# TAG: pinger_program +# Note: This option is only available if Squid is rebuilt with the +# --enable-icmp option +# +# Specify the location of the executable for the pinger process. +#Default: +# pinger_program /usr/lib/squid/pinger + +# TAG: pinger_enable +# Note: This option is only available if Squid is rebuilt with the +# --enable-icmp option +# +# Control whether the pinger is active at run-time. +# Enables turning ICMP pinger on and off with a simple +# squid -k reconfigure. +#Default: +# pinger_enable off + +# OPTIONS FOR URL REWRITING +# ----------------------------------------------------------------------------- + +# TAG: url_rewrite_program +# Specify the location of the executable URL rewriter to use. +# Since they can perform almost any function there isn't one included. +# +# For each requested URL, the rewriter will receive on line with the format +# +# URL client_ip "/" fqdn user method [ kvpairs] +# +# In the future, the rewriter interface will be extended with +# key=value pairs ("kvpairs" shown above). Rewriter programs +# should be prepared to receive and possibly ignore additional +# whitespace-separated tokens on each input line. +# +# And the rewriter may return a rewritten URL. The other components of +# the request line does not need to be returned (ignored if they are). +# +# The rewriter can also indicate that a client-side redirect should +# be performed to the new URL. This is done by prefixing the returned +# URL with "301:" (moved permanently) or 302: (moved temporarily), etc. +# +# By default, a URL rewriter is not used. +#Default: +# none + +# TAG: url_rewrite_children +# The number of redirector processes to spawn. If you start +# too few Squid will have to wait for them to process a backlog of +# URLs, slowing it down. If you start too many they will use RAM +# and other system resources. +#Default: +# url_rewrite_children 5 + +# TAG: url_rewrite_concurrency +# The number of requests each redirector helper can handle in +# parallel. Defaults to 0 which indicates the redirector +# is a old-style single threaded redirector. +# +# When this directive is set to a value >= 1 then the protocol +# used to communicate with the helper is modified to include +# a request ID in front of the request/response. The request +# ID from the request must be echoed back with the response +# to that request. +#Default: +# url_rewrite_concurrency 0 + +# TAG: url_rewrite_host_header +# By default Squid rewrites any Host: header in redirected +# requests. If you are running an accelerator this may +# not be a wanted effect of a redirector. +# +# WARNING: Entries are cached on the result of the URL rewriting +# process, so be careful if you have domain-virtual hosts. +#Default: +# url_rewrite_host_header on + +# TAG: url_rewrite_access +# If defined, this access list specifies which requests are +# sent to the redirector processes. By default all requests +# are sent. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# none + +# TAG: url_rewrite_bypass +# When this is 'on', a request will not go through the +# redirector if all redirectors are busy. If this is 'off' +# and the redirector queue grows too large, Squid will exit +# with a FATAL error and ask you to increase the number of +# redirectors. You should only enable this if the redirectors +# are not critical to your caching system. If you use +# redirectors for access control, and you enable this option, +# users may have access to pages they should not +# be allowed to request. +#Default: +# url_rewrite_bypass off + +# OPTIONS FOR TUNING THE CACHE +# ----------------------------------------------------------------------------- + +# TAG: cache +# A list of ACL elements which, if matched and denied, cause the request to +# not be satisfied from the cache and the reply to not be cached. +# In other words, use this to force certain objects to never be cached. +# +# You must use the words 'allow' or 'deny' to indicate whether items +# matching the ACL should be allowed or denied into the cache. +# +# Default is to allow all to be cached. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# none + +# TAG: refresh_pattern +# usage: refresh_pattern [-i] regex min percent max [options] +# +# By default, regular expressions are CASE-SENSITIVE. To make +# them case-insensitive, use the -i option. +# +# 'Min' is the time (in minutes) an object without an explicit +# expiry time should be considered fresh. The recommended +# value is 0, any higher values may cause dynamic applications +# to be erroneously cached unless the application designer +# has taken the appropriate actions. +# +# 'Percent' is a percentage of the objects age (time since last +# modification age) an object without explicit expiry time +# will be considered fresh. +# +# 'Max' is an upper limit on how long objects without an explicit +# expiry time will be considered fresh. +# +# options: override-expire +# override-lastmod +# reload-into-ims +# ignore-reload +# ignore-no-cache +# ignore-no-store +# ignore-must-revalidate +# ignore-private +# ignore-auth +# refresh-ims +# +# override-expire enforces min age even if the server +# sent an explicit expiry time (e.g., with the +# Expires: header or Cache-Control: max-age). Doing this +# VIOLATES the HTTP standard. Enabling this feature +# could make you liable for problems which it causes. +# +# Note: override-expire does not enforce staleness - it only extends +# freshness / min. If the server returns a Expires time which +# is longer than your max time, Squid will still consider +# the object fresh for that period of time. +# +# override-lastmod enforces min age even on objects +# that were modified recently. +# +# reload-into-ims changes client no-cache or ``reload'' +# to If-Modified-Since requests. Doing this VIOLATES the +# HTTP standard. Enabling this feature could make you +# liable for problems which it causes. +# +# ignore-reload ignores a client no-cache or ``reload'' +# header. Doing this VIOLATES the HTTP standard. Enabling +# this feature could make you liable for problems which +# it causes. +# +# ignore-no-cache ignores any ``Pragma: no-cache'' and +# ``Cache-control: no-cache'' headers received from a server. +# The HTTP RFC never allows the use of this (Pragma) header +# from a server, only a client, though plenty of servers +# send it anyway. +# +# ignore-no-store ignores any ``Cache-control: no-store'' +# headers received from a server. Doing this VIOLATES +# the HTTP standard. Enabling this feature could make you +# liable for problems which it causes. +# +# ignore-must-revalidate ignores any ``Cache-Control: must-revalidate`` +# headers received from a server. Doing this VIOLATES +# the HTTP standard. Enabling this feature could make you +# liable for problems which it causes. +# +# ignore-private ignores any ``Cache-control: private'' +# headers received from a server. Doing this VIOLATES +# the HTTP standard. Enabling this feature could make you +# liable for problems which it causes. +# +# ignore-auth caches responses to requests with authorization, +# as if the originserver had sent ``Cache-control: public'' +# in the response header. Doing this VIOLATES the HTTP standard. +# Enabling this feature could make you liable for problems which +# it causes. +# +# refresh-ims causes squid to contact the origin server +# when a client issues an If-Modified-Since request. This +# ensures that the client will receive an updated version +# if one is available. +# +# Basically a cached object is: +# +# FRESH if expires < now, else STALE +# STALE if age > max +# FRESH if lm-factor < percent, else STALE +# FRESH if age < min +# else STALE +# +# The refresh_pattern lines are checked in the order listed here. +# The first entry which matches is used. If none of the entries +# match the default will be used. +# +# Note, you must uncomment all the default lines if you want +# to change one. The default setting is only active if none is +# used. +# +# + +# Add any of your own refresh_pattern entries above these. +refresh_pattern ^ftp: 1440 20% 10080 +refresh_pattern ^gopher: 1440 0% 1440 +refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 +refresh_pattern /(|In)Release(|\.gpg)$ 0 0% 0 +refresh_pattern /(Packages|Sources)(|\.gz|\.bz2|\.xz)$ 0 0% 0 +refresh_pattern \.deb$ 129600 100% 129600 +refresh_pattern \.udeb$ 129600 100% 129600 +refresh_pattern \.tar\.(gz|bz2|xz|lzma)$ 129600 100% 129600 +refresh_pattern . 0 20% 4320 + +# TAG: quick_abort_min (KB) +#Default: +# quick_abort_min 16 KB + +# TAG: quick_abort_max (KB) +#Default: +# quick_abort_max 16 KB + +# TAG: quick_abort_pct (percent) +# The cache by default continues downloading aborted requests +# which are almost completed (less than 16 KB remaining). This +# may be undesirable on slow (e.g. SLIP) links and/or very busy +# caches. Impatient users may tie up file descriptors and +# bandwidth by repeatedly requesting and immediately aborting +# downloads. +# +# When the user aborts a request, Squid will check the +# quick_abort values to the amount of data transfered until +# then. +# +# If the transfer has less than 'quick_abort_min' KB remaining, +# it will finish the retrieval. +# +# If the transfer has more than 'quick_abort_max' KB remaining, +# it will abort the retrieval. +# +# If more than 'quick_abort_pct' of the transfer has completed, +# it will finish the retrieval. +# +# If you do not want any retrieval to continue after the client +# has aborted, set both 'quick_abort_min' and 'quick_abort_max' +# to '0 KB'. +# +# If you want retrievals to always continue if they are being +# cached set 'quick_abort_min' to '-1 KB'. +#Default: +# quick_abort_pct 95 + +# TAG: read_ahead_gap buffer-size +# The amount of data the cache will buffer ahead of what has been +# sent to the client when retrieving an object from another server. +#Default: +# read_ahead_gap 16 KB + +# TAG: negative_ttl time-units +# Set the Default Time-to-Live (TTL) for failed requests. +# Certain types of failures (such as "connection refused" and +# "404 Not Found") are able to be negatively-cached for a short time. +# Modern web servers should provide Expires: header, however if they +# do not this can provide a minimum TTL. +# The default is not to cache errors with unknown expiry details. +# +# Note that this is different from negative caching of DNS lookups. +# +# WARNING: Doing this VIOLATES the HTTP standard. Enabling +# this feature could make you liable for problems which it +# causes. +#Default: +# negative_ttl 0 seconds + +# TAG: positive_dns_ttl time-units +# Upper limit on how long Squid will cache positive DNS responses. +# Default is 6 hours (360 minutes). This directive must be set +# larger than negative_dns_ttl. +#Default: +# positive_dns_ttl 6 hours + +# TAG: negative_dns_ttl time-units +# Time-to-Live (TTL) for negative caching of failed DNS lookups. +# This also sets the lower cache limit on positive lookups. +# Minimum value is 1 second, and it is not recommendable to go +# much below 10 seconds. +#Default: +# negative_dns_ttl 1 minutes + +# TAG: range_offset_limit (bytes) +# Sets a upper limit on how far into the the file a Range request +# may be to cause Squid to prefetch the whole file. If beyond this +# limit Squid forwards the Range request as it is and the result +# is NOT cached. +# +# This is to stop a far ahead range request (lets say start at 17MB) +# from making Squid fetch the whole object up to that point before +# sending anything to the client. +# +# A value of 0 causes Squid to never fetch more than the +# client requested. (default) +# +# A value of -1 causes Squid to always fetch the object from the +# beginning so it may cache the result. (2.0 style) +# +# NP: Using -1 here will override any quick_abort settings that may +# otherwise apply to the range request. The range request will +# be fully fetched from start to finish regardless of the client +# actions. This affects bandwidth usage. +#Default: +# range_offset_limit 0 KB + +# TAG: minimum_expiry_time (seconds) +# The minimum caching time according to (Expires - Date) +# Headers Squid honors if the object can't be revalidated +# defaults to 60 seconds. In reverse proxy environments it +# might be desirable to honor shorter object lifetimes. It +# is most likely better to make your server return a +# meaningful Last-Modified header however. In ESI environments +# where page fragments often have short lifetimes, this will +# often be best set to 0. +#Default: +# minimum_expiry_time 60 seconds + +# TAG: store_avg_object_size (kbytes) +# Average object size, used to estimate number of objects your +# cache can hold. The default is 13 KB. +#Default: +# store_avg_object_size 13 KB + +# TAG: store_objects_per_bucket +# Target number of objects per bucket in the store hash table. +# Lowering this value increases the total number of buckets and +# also the storage maintenance rate. The default is 20. +#Default: +# store_objects_per_bucket 20 + +# HTTP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: request_header_max_size (KB) +# This specifies the maximum size for HTTP headers in a request. +# Request headers are usually relatively small (about 512 bytes). +# Placing a limit on the request header size will catch certain +# bugs (for example with persistent connections) and possibly +# buffer-overflow or denial-of-service attacks. +#Default: +# request_header_max_size 64 KB + +# TAG: reply_header_max_size (KB) +# This specifies the maximum size for HTTP headers in a reply. +# Reply headers are usually relatively small (about 512 bytes). +# Placing a limit on the reply header size will catch certain +# bugs (for example with persistent connections) and possibly +# buffer-overflow or denial-of-service attacks. +#Default: +# reply_header_max_size 64 KB + +# TAG: request_body_max_size (bytes) +# This specifies the maximum size for an HTTP request body. +# In other words, the maximum size of a PUT/POST request. +# A user who attempts to send a request with a body larger +# than this limit receives an "Invalid Request" error message. +# If you set this parameter to a zero (the default), there will +# be no limit imposed. +#Default: +# request_body_max_size 0 KB + +# TAG: client_request_buffer_max_size (bytes) +# This specifies the maximum buffer size of a client request. +# It prevents squid eating too much memory when somebody uploads +# a large file. +#Default: +# client_request_buffer_max_size 512 KB + +# TAG: chunked_request_body_max_size (bytes) +# A broken or confused HTTP/1.1 client may send a chunked HTTP +# request to Squid. Squid does not have full support for that +# feature yet. To cope with such requests, Squid buffers the +# entire request and then dechunks request body to create a +# plain HTTP/1.0 request with a known content length. The plain +# request is then used by the rest of Squid code as usual. +# +# The option value specifies the maximum size of the buffer used +# to hold the request before the conversion. If the chunked +# request size exceeds the specified limit, the conversion +# fails, and the client receives an "unsupported request" error, +# as if dechunking was disabled. +# +# Dechunking is enabled by default. To disable conversion of +# chunked requests, set the maximum to zero. +# +# Request dechunking feature and this option in particular are a +# temporary hack. When chunking requests and responses are fully +# supported, there will be no need to buffer a chunked request. +#Default: +# chunked_request_body_max_size 64 KB + +# TAG: broken_posts +# A list of ACL elements which, if matched, causes Squid to send +# an extra CRLF pair after the body of a PUT/POST request. +# +# Some HTTP servers has broken implementations of PUT/POST, +# and rely on an extra CRLF pair sent by some WWW clients. +# +# Quote from RFC2616 section 4.1 on this matter: +# +# Note: certain buggy HTTP/1.0 client implementations generate an +# extra CRLF's after a POST request. To restate what is explicitly +# forbidden by the BNF, an HTTP/1.1 client must not preface or follow +# a request with an extra CRLF. +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +# +#Example: +# acl buggy_server url_regex ^http://.... +# broken_posts allow buggy_server +#Default: +# none + +# TAG: icap_uses_indirect_client on|off +# Controls whether the indirect client IP address (instead of the direct +# client IP address) is passed to adaptation services. +# +# See also: follow_x_forwarded_for adaptation_send_client_ip +#Default: +# icap_uses_indirect_client on + +# TAG: via on|off +# If set (default), Squid will include a Via header in requests and +# replies as required by RFC2616. +#Default: +# via on + +# TAG: ie_refresh on|off +# Microsoft Internet Explorer up until version 5.5 Service +# Pack 1 has an issue with transparent proxies, wherein it +# is impossible to force a refresh. Turning this on provides +# a partial fix to the problem, by causing all IMS-REFRESH +# requests from older IE versions to check the origin server +# for fresh content. This reduces hit ratio by some amount +# (~10% in my experience), but allows users to actually get +# fresh content when they want it. Note because Squid +# cannot tell if the user is using 5.5 or 5.5SP1, the behavior +# of 5.5 is unchanged from old versions of Squid (i.e. a +# forced refresh is impossible). Newer versions of IE will, +# hopefully, continue to have the new behavior and will be +# handled based on that assumption. This option defaults to +# the old Squid behavior, which is better for hit ratios but +# worse for clients using IE, if they need to be able to +# force fresh content. +#Default: +# ie_refresh off + +# TAG: vary_ignore_expire on|off +# Many HTTP servers supporting Vary gives such objects +# immediate expiry time with no cache-control header +# when requested by a HTTP/1.0 client. This option +# enables Squid to ignore such expiry times until +# HTTP/1.1 is fully implemented. +# +# WARNING: If turned on this may eventually cause some +# varying objects not intended for caching to get cached. +#Default: +# vary_ignore_expire off + +# TAG: request_entities +# Squid defaults to deny GET and HEAD requests with request entities, +# as the meaning of such requests are undefined in the HTTP standard +# even if not explicitly forbidden. +# +# Set this directive to on if you have clients which insists +# on sending request entities in GET or HEAD requests. But be warned +# that there is server software (both proxies and web servers) which +# can fail to properly process this kind of request which may make you +# vulnerable to cache pollution attacks if enabled. +#Default: +# request_entities off + +# TAG: request_header_access +# Usage: request_header_access header_name allow|deny [!]aclname ... +# +# WARNING: Doing this VIOLATES the HTTP standard. Enabling +# this feature could make you liable for problems which it +# causes. +# +# This option replaces the old 'anonymize_headers' and the +# older 'http_anonymizer' option with something that is much +# more configurable. This new method creates a list of ACLs +# for each header, allowing you very fine-tuned header +# mangling. +# +# This option only applies to request headers, i.e., from the +# client to the server. +# +# You can only specify known headers for the header name. +# Other headers are reclassified as 'Other'. You can also +# refer to all the headers with 'All'. +# +# For example, to achieve the same behavior as the old +# 'http_anonymizer standard' option, you should use: +# +# request_header_access From deny all +# request_header_access Referer deny all +# request_header_access Server deny all +# request_header_access User-Agent deny all +# request_header_access WWW-Authenticate deny all +# request_header_access Link deny all +# +# Or, to reproduce the old 'http_anonymizer paranoid' feature +# you should use: +# +# request_header_access Allow allow all +# request_header_access Authorization allow all +# request_header_access WWW-Authenticate allow all +# request_header_access Proxy-Authorization allow all +# request_header_access Proxy-Authenticate allow all +# request_header_access Cache-Control allow all +# request_header_access Content-Encoding allow all +# request_header_access Content-Length allow all +# request_header_access Content-Type allow all +# request_header_access Date allow all +# request_header_access Expires allow all +# request_header_access Host allow all +# request_header_access If-Modified-Since allow all +# request_header_access Last-Modified allow all +# request_header_access Location allow all +# request_header_access Pragma allow all +# request_header_access Accept allow all +# request_header_access Accept-Charset allow all +# request_header_access Accept-Encoding allow all +# request_header_access Accept-Language allow all +# request_header_access Content-Language allow all +# request_header_access Mime-Version allow all +# request_header_access Retry-After allow all +# request_header_access Title allow all +# request_header_access Connection allow all +# request_header_access All deny all +# +# although many of those are HTTP reply headers, and so should be +# controlled with the reply_header_access directive. +# +# By default, all headers are allowed (no anonymizing is +# performed). +#Default: +# none + +# TAG: reply_header_access +# Usage: reply_header_access header_name allow|deny [!]aclname ... +# +# WARNING: Doing this VIOLATES the HTTP standard. Enabling +# this feature could make you liable for problems which it +# causes. +# +# This option only applies to reply headers, i.e., from the +# server to the client. +# +# This is the same as request_header_access, but in the other +# direction. +# +# This option replaces the old 'anonymize_headers' and the +# older 'http_anonymizer' option with something that is much +# more configurable. This new method creates a list of ACLs +# for each header, allowing you very fine-tuned header +# mangling. +# +# You can only specify known headers for the header name. +# Other headers are reclassified as 'Other'. You can also +# refer to all the headers with 'All'. +# +# For example, to achieve the same behavior as the old +# 'http_anonymizer standard' option, you should use: +# +# reply_header_access From deny all +# reply_header_access Referer deny all +# reply_header_access Server deny all +# reply_header_access User-Agent deny all +# reply_header_access WWW-Authenticate deny all +# reply_header_access Link deny all +# +# Or, to reproduce the old 'http_anonymizer paranoid' feature +# you should use: +# +# reply_header_access Allow allow all +# reply_header_access Authorization allow all +# reply_header_access WWW-Authenticate allow all +# reply_header_access Proxy-Authorization allow all +# reply_header_access Proxy-Authenticate allow all +# reply_header_access Cache-Control allow all +# reply_header_access Content-Encoding allow all +# reply_header_access Content-Length allow all +# reply_header_access Content-Type allow all +# reply_header_access Date allow all +# reply_header_access Expires allow all +# reply_header_access Host allow all +# reply_header_access If-Modified-Since allow all +# reply_header_access Last-Modified allow all +# reply_header_access Location allow all +# reply_header_access Pragma allow all +# reply_header_access Accept allow all +# reply_header_access Accept-Charset allow all +# reply_header_access Accept-Encoding allow all +# reply_header_access Accept-Language allow all +# reply_header_access Content-Language allow all +# reply_header_access Mime-Version allow all +# reply_header_access Retry-After allow all +# reply_header_access Title allow all +# reply_header_access Connection allow all +# reply_header_access All deny all +# +# although the HTTP request headers won't be usefully controlled +# by this directive -- see request_header_access for details. +# +# By default, all headers are allowed (no anonymizing is +# performed). +#Default: +# none + +# TAG: request_header_replace +# Usage: request_header_replace header_name message +# Example: request_header_replace User-Agent Nutscrape/1.0 (CP/M; 8-bit) +# +# This option allows you to change the contents of headers +# denied with request_header_access above, by replacing them +# with some fixed string. This replaces the old fake_user_agent +# option. +# +# This only applies to request headers, not reply headers. +# +# By default, headers are removed if denied. +#Default: +# none + +# TAG: reply_header_replace +# Usage: reply_header_replace header_name message +# Example: reply_header_replace Server Foo/1.0 +# +# This option allows you to change the contents of headers +# denied with reply_header_access above, by replacing them +# with some fixed string. +# +# This only applies to reply headers, not request headers. +# +# By default, headers are removed if denied. +#Default: +# none + +# TAG: relaxed_header_parser on|off|warn +# In the default "on" setting Squid accepts certain forms +# of non-compliant HTTP messages where it is unambiguous +# what the sending application intended even if the message +# is not correctly formatted. The messages is then normalized +# to the correct form when forwarded by Squid. +# +# If set to "warn" then a warning will be emitted in cache.log +# each time such HTTP error is encountered. +# +# If set to "off" then such HTTP errors will cause the request +# or response to be rejected. +#Default: +# relaxed_header_parser on + +# TAG: ignore_expect_100 on|off +# This option makes Squid ignore any Expect: 100-continue header present +# in the request. RFC 2616 requires that Squid being unable to satisfy +# the response expectation MUST return a 417 error. +# +# Note: Enabling this is a HTTP protocol violation, but some clients may +# not handle it well.. +#Default: +# ignore_expect_100 off + +# TIMEOUTS +# ----------------------------------------------------------------------------- + +# TAG: forward_timeout time-units +# This parameter specifies how long Squid should at most attempt in +# finding a forwarding path for the request before giving up. +#Default: +# forward_timeout 4 minutes + +# TAG: connect_timeout time-units +# This parameter specifies how long to wait for the TCP connect to +# the requested server or peer to complete before Squid should +# attempt to find another path where to forward the request. +#Default: +# connect_timeout 1 minute + +# TAG: peer_connect_timeout time-units +# This parameter specifies how long to wait for a pending TCP +# connection to a peer cache. The default is 30 seconds. You +# may also set different timeout values for individual neighbors +# with the 'connect-timeout' option on a 'cache_peer' line. +#Default: +# peer_connect_timeout 30 seconds + +# TAG: read_timeout time-units +# The read_timeout is applied on server-side connections. After +# each successful read(), the timeout will be extended by this +# amount. If no data is read again after this amount of time, +# the request is aborted and logged with ERR_READ_TIMEOUT. The +# default is 15 minutes. +#Default: +# read_timeout 15 minutes + +# TAG: request_timeout +# How long to wait for complete HTTP request headers after initial +# connection establishment. +#Default: +# request_timeout 5 minutes + +# TAG: persistent_request_timeout +# How long to wait for the next HTTP request on a persistent +# connection after the previous request completes. +#Default: +# persistent_request_timeout 2 minutes + +# TAG: client_lifetime time-units +# The maximum amount of time a client (browser) is allowed to +# remain connected to the cache process. This protects the Cache +# from having a lot of sockets (and hence file descriptors) tied up +# in a CLOSE_WAIT state from remote clients that go away without +# properly shutting down (either because of a network failure or +# because of a poor client implementation). The default is one +# day, 1440 minutes. +# +# NOTE: The default value is intended to be much larger than any +# client would ever need to be connected to your cache. You +# should probably change client_lifetime only as a last resort. +# If you seem to have many client connections tying up +# filedescriptors, we recommend first tuning the read_timeout, +# request_timeout, persistent_request_timeout and quick_abort values. +#Default: +# client_lifetime 1 day + +# TAG: half_closed_clients +# Some clients may shutdown the sending side of their TCP +# connections, while leaving their receiving sides open. Sometimes, +# Squid can not tell the difference between a half-closed and a +# fully-closed TCP connection. +# +# By default, Squid will immediately close client connections when +# read(2) returns "no more data to read." +# +# Change this option to 'on' and Squid will keep open connections +# until a read(2) or write(2) on the socket returns an error. +# This may show some benefits for reverse proxies. But if not +# it is recommended to leave OFF. +#Default: +# half_closed_clients off + +# TAG: pconn_timeout +# Timeout for idle persistent connections to servers and other +# proxies. +#Default: +# pconn_timeout 1 minute + +# TAG: ident_timeout +# Maximum time to wait for IDENT lookups to complete. +# +# If this is too high, and you enabled IDENT lookups from untrusted +# users, you might be susceptible to denial-of-service by having +# many ident requests going at once. +#Default: +# ident_timeout 10 seconds + +# TAG: shutdown_lifetime time-units +# When SIGTERM or SIGHUP is received, the cache is put into +# "shutdown pending" mode until all active sockets are closed. +# This value is the lifetime to set for all open descriptors +# during shutdown mode. Any active clients after this many +# seconds will receive a 'timeout' message. +#Default: +# shutdown_lifetime 30 seconds + +# ADMINISTRATIVE PARAMETERS +# ----------------------------------------------------------------------------- + +# TAG: cache_mgr +# Email-address of local cache manager who will receive +# mail if the cache dies. The default is "webmaster." +#Default: +# cache_mgr webmaster + +# TAG: mail_from +# From: email-address for mail sent when the cache dies. +# The default is to use 'appname@unique_hostname'. +# Default appname value is "squid", can be changed into +# src/globals.h before building squid. +#Default: +# none + +# TAG: mail_program +# Email program used to send mail if the cache dies. +# The default is "mail". The specified program must comply +# with the standard Unix mail syntax: +# mail-program recipient < mailfile +# +# Optional command line options can be specified. +#Default: +# mail_program mail + +# TAG: cache_effective_user +# If you start Squid as root, it will change its effective/real +# UID/GID to the user specified below. The default is to change +# to UID of proxy. +# see also; cache_effective_group +#Default: +# cache_effective_user proxy + +# TAG: cache_effective_group +# Squid sets the GID to the effective user's default group ID +# (taken from the password file) and supplementary group list +# from the groups membership. +# +# If you want Squid to run with a specific GID regardless of +# the group memberships of the effective user then set this +# to the group (or GID) you want Squid to run as. When set +# all other group privileges of the effective user are ignored +# and only this GID is effective. If Squid is not started as +# root the user starting Squid MUST be member of the specified +# group. +# +# This option is not recommended by the Squid Team. +# Our preference is for administrators to configure a secure +# user account for squid with UID/GID matching system policies. +#Default: +# none + +# TAG: httpd_suppress_version_string on|off +# Suppress Squid version string info in HTTP headers and HTML error pages. +#Default: +# httpd_suppress_version_string off + +# TAG: visible_hostname +# If you want to present a special hostname in error messages, etc, +# define this. Otherwise, the return value of gethostname() +# will be used. If you have multiple caches in a cluster and +# get errors about IP-forwarding you must set them to have individual +# names with this setting. +#Default: +# visible_hostname localhost + +# TAG: unique_hostname +# If you want to have multiple machines with the same +# 'visible_hostname' you must give each machine a different +# 'unique_hostname' so forwarding loops can be detected. +#Default: +# none + +# TAG: hostname_aliases +# A list of other DNS names your cache has. +#Default: +# none + +# TAG: umask +# Minimum umask which should be enforced while the proxy +# is running, in addition to the umask set at startup. +# +# For a traditional octal representation of umasks, start +# your value with 0. +#Default: +# umask 027 + +# OPTIONS FOR THE CACHE REGISTRATION SERVICE +# ----------------------------------------------------------------------------- +# +# This section contains parameters for the (optional) cache +# announcement service. This service is provided to help +# cache administrators locate one another in order to join or +# create cache hierarchies. +# +# An 'announcement' message is sent (via UDP) to the registration +# service by Squid. By default, the announcement message is NOT +# SENT unless you enable it with 'announce_period' below. +# +# The announcement message includes your hostname, plus the +# following information from this configuration file: +# +# http_port +# icp_port +# cache_mgr +# +# All current information is processed regularly and made +# available on the Web at http://www.ircache.net/Cache/Tracker/. + +# TAG: announce_period +# This is how frequently to send cache announcements. The +# default is `0' which disables sending the announcement +# messages. +# +# To enable announcing your cache, just set an announce period. +# +# Example: +# announce_period 1 day +#Default: +# announce_period 0 + +# TAG: announce_host +#Default: +# announce_host tracker.ircache.net + +# TAG: announce_file +#Default: +# none + +# TAG: announce_port +# announce_host and announce_port set the hostname and port +# number where the registration message will be sent. +# +# Hostname will default to 'tracker.ircache.net' and port will +# default default to 3131. If the 'filename' argument is given, +# the contents of that file will be included in the announce +# message. +#Default: +# announce_port 3131 + +# HTTPD-ACCELERATOR OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: httpd_accel_surrogate_id +# Surrogates (http://www.esi.org/architecture_spec_1.0.html) +# need an identification token to allow control targeting. Because +# a farm of surrogates may all perform the same tasks, they may share +# an identification token. +#Default: +# httpd_accel_surrogate_id unset-id + +# TAG: http_accel_surrogate_remote on|off +# Remote surrogates (such as those in a CDN) honour Surrogate-Control: no-store-remote. +# Set this to on to have squid behave as a remote surrogate. +#Default: +# http_accel_surrogate_remote off + +# TAG: esi_parser libxml2|expat|custom +# ESI markup is not strictly XML compatible. The custom ESI parser +# will give higher performance, but cannot handle non ASCII character +# encodings. +#Default: +# esi_parser custom + +# DELAY POOL PARAMETERS +# ----------------------------------------------------------------------------- + +# TAG: delay_pools +# This represents the number of delay pools to be used. For example, +# if you have one class 2 delay pool and one class 3 delays pool, you +# have a total of 2 delay pools. +#Default: +# delay_pools 0 + +# TAG: delay_class +# This defines the class of each delay pool. There must be exactly one +# delay_class line for each delay pool. For example, to define two +# delay pools, one of class 2 and one of class 3, the settings above +# and here would be: +# +# Example: +# delay_pools 4 # 4 delay pools +# delay_class 1 2 # pool 1 is a class 2 pool +# delay_class 2 3 # pool 2 is a class 3 pool +# delay_class 3 4 # pool 3 is a class 4 pool +# delay_class 4 5 # pool 4 is a class 5 pool +# +# The delay pool classes are: +# +# class 1 Everything is limited by a single aggregate +# bucket. +# +# class 2 Everything is limited by a single aggregate +# bucket as well as an "individual" bucket chosen +# from bits 25 through 32 of the IPv4 address. +# +# class 3 Everything is limited by a single aggregate +# bucket as well as a "network" bucket chosen +# from bits 17 through 24 of the IP address and a +# "individual" bucket chosen from bits 17 through +# 32 of the IPv4 address. +# +# class 4 Everything in a class 3 delay pool, with an +# additional limit on a per user basis. This +# only takes effect if the username is established +# in advance - by forcing authentication in your +# http_access rules. +# +# class 5 Requests are grouped according their tag (see +# external_acl's tag= reply). +# +# +# Each pool also requires a delay_parameters directive to configure the pool size +# and speed limits used whenever the pool is applied to a request. Along with +# a set of delay_access directives to determine when it is used. +# +# NOTE: If an IP address is a.b.c.d +# -> bits 25 through 32 are "d" +# -> bits 17 through 24 are "c" +# -> bits 17 through 32 are "c * 256 + d" +# +# NOTE-2: Due to the use of bitmasks in class 2,3,4 pools they only apply to +# IPv4 traffic. Class 1 and 5 pools may be used with IPv6 traffic. +#Default: +# none + +# TAG: delay_access +# This is used to determine which delay pool a request falls into. +# +# delay_access is sorted per pool and the matching starts with pool 1, +# then pool 2, ..., and finally pool N. The first delay pool where the +# request is allowed is selected for the request. If it does not allow +# the request to any pool then the request is not delayed (default). +# +# For example, if you want some_big_clients in delay +# pool 1 and lotsa_little_clients in delay pool 2: +# +#Example: +# delay_access 1 allow some_big_clients +# delay_access 1 deny all +# delay_access 2 allow lotsa_little_clients +# delay_access 2 deny all +# delay_access 3 allow authenticated_clients +#Default: +# none + +# TAG: delay_parameters +# This defines the parameters for a delay pool. Each delay pool has +# a number of "buckets" associated with it, as explained in the +# description of delay_class. +# +# For a class 1 delay pool, the syntax is: +# delay_pools pool 1 +# delay_parameters pool aggregate +# +# For a class 2 delay pool: +# delay_pools pool 2 +# delay_parameters pool aggregate individual +# +# For a class 3 delay pool: +# delay_pools pool 3 +# delay_parameters pool aggregate network individual +# +# For a class 4 delay pool: +# delay_pools pool 4 +# delay_parameters pool aggregate network individual user +# +# For a class 5 delay pool: +# delay_pools pool 5 +# delay_parameters pool tagrate +# +# The option variables are: +# +# pool a pool number - ie, a number between 1 and the +# number specified in delay_pools as used in +# delay_class lines. +# +# aggregate the speed limit parameters for the aggregate bucket +# (class 1, 2, 3). +# +# individual the speed limit parameters for the individual +# buckets (class 2, 3). +# +# network the speed limit parameters for the network buckets +# (class 3). +# +# user the speed limit parameters for the user buckets +# (class 4). +# +# tagrate the speed limit parameters for the tag buckets +# (class 5). +# +# A pair of delay parameters is written restore/maximum, where restore is +# the number of bytes (not bits - modem and network speeds are usually +# quoted in bits) per second placed into the bucket, and maximum is the +# maximum number of bytes which can be in the bucket at any time. +# +# There must be one delay_parameters line for each delay pool. +# +# +# For example, if delay pool number 1 is a class 2 delay pool as in the +# above example, and is being used to strictly limit each host to 64Kbit/sec +# (plus overheads), with no overall limit, the line is: +# +# delay_parameters 1 -1/-1 8000/8000 +# +# Note that 8 x 8000 KByte/sec -> 64Kbit/sec. +# +# Note that the figure -1 is used to represent "unlimited". +# +# +# And, if delay pool number 2 is a class 3 delay pool as in the above +# example, and you want to limit it to a total of 256Kbit/sec (strict limit) +# with each 8-bit network permitted 64Kbit/sec (strict limit) and each +# individual host permitted 4800bit/sec with a bucket maximum size of 64Kbits +# to permit a decent web page to be downloaded at a decent speed +# (if the network is not being limited due to overuse) but slow down +# large downloads more significantly: +# +# delay_parameters 2 32000/32000 8000/8000 600/8000 +# +# Note that 8 x 32000 KByte/sec -> 256Kbit/sec. +# 8 x 8000 KByte/sec -> 64Kbit/sec. +# 8 x 600 Byte/sec -> 4800bit/sec. +# +# +# Finally, for a class 4 delay pool as in the example - each user will +# be limited to 128Kbits/sec no matter how many workstations they are logged into.: +# +# delay_parameters 4 32000/32000 8000/8000 600/64000 16000/16000 +#Default: +# none + +# TAG: delay_initial_bucket_level (percent, 0-100) +# The initial bucket percentage is used to determine how much is put +# in each bucket when squid starts, is reconfigured, or first notices +# a host accessing it (in class 2 and class 3, individual hosts and +# networks only have buckets associated with them once they have been +# "seen" by squid). +#Default: +# delay_initial_bucket_level 50 + +# WCCPv1 AND WCCPv2 CONFIGURATION OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: wccp_router +# Use this option to define your WCCP ``home'' router for +# Squid. +# +# wccp_router supports a single WCCP(v1) router +# +# wccp2_router supports multiple WCCPv2 routers +# +# only one of the two may be used at the same time and defines +# which version of WCCP to use. +#Default: +# wccp_router any_addr + +# TAG: wccp2_router +# Use this option to define your WCCP ``home'' router for +# Squid. +# +# wccp_router supports a single WCCP(v1) router +# +# wccp2_router supports multiple WCCPv2 routers +# +# only one of the two may be used at the same time and defines +# which version of WCCP to use. +#Default: +# none + +# TAG: wccp_version +# This directive is only relevant if you need to set up WCCP(v1) +# to some very old and end-of-life Cisco routers. In all other +# setups it must be left unset or at the default setting. +# It defines an internal version in the WCCP(v1) protocol, +# with version 4 being the officially documented protocol. +# +# According to some users, Cisco IOS 11.2 and earlier only +# support WCCP version 3. If you're using that or an earlier +# version of IOS, you may need to change this value to 3, otherwise +# do not specify this parameter. +#Default: +# wccp_version 4 + +# TAG: wccp2_rebuild_wait +# If this is enabled Squid will wait for the cache dir rebuild to finish +# before sending the first wccp2 HereIAm packet +#Default: +# wccp2_rebuild_wait on + +# TAG: wccp2_forwarding_method +# WCCP2 allows the setting of forwarding methods between the +# router/switch and the cache. Valid values are as follows: +# +# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel) +# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting) +# +# Currently (as of IOS 12.4) cisco routers only support GRE. +# Cisco switches only support the L2 redirect assignment method. +#Default: +# wccp2_forwarding_method gre + +# TAG: wccp2_return_method +# WCCP2 allows the setting of return methods between the +# router/switch and the cache for packets that the cache +# decides not to handle. Valid values are as follows: +# +# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel) +# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting) +# +# Currently (as of IOS 12.4) cisco routers only support GRE. +# Cisco switches only support the L2 redirect assignment. +# +# If the "ip wccp redirect exclude in" command has been +# enabled on the cache interface, then it is still safe for +# the proxy server to use a l2 redirect method even if this +# option is set to GRE. +#Default: +# wccp2_return_method gre + +# TAG: wccp2_assignment_method +# WCCP2 allows the setting of methods to assign the WCCP hash +# Valid values are as follows: +# +# hash - Hash assignment +# mask - Mask assignment +# +# As a general rule, cisco routers support the hash assignment method +# and cisco switches support the mask assignment method. +#Default: +# wccp2_assignment_method hash + +# TAG: wccp2_service +# WCCP2 allows for multiple traffic services. There are two +# types: "standard" and "dynamic". The standard type defines +# one service id - http (id 0). The dynamic service ids can be from +# 51 to 255 inclusive. In order to use a dynamic service id +# one must define the type of traffic to be redirected; this is done +# using the wccp2_service_info option. +# +# The "standard" type does not require a wccp2_service_info option, +# just specifying the service id will suffice. +# +# MD5 service authentication can be enabled by adding +# "password=" to the end of this service declaration. +# +# Examples: +# +# wccp2_service standard 0 # for the 'web-cache' standard service +# wccp2_service dynamic 80 # a dynamic service type which will be +# # fleshed out with subsequent options. +# wccp2_service standard 0 password=foo +#Default: +# wccp2_service standard 0 + +# TAG: wccp2_service_info +# Dynamic WCCPv2 services require further information to define the +# traffic you wish to have diverted. +# +# The format is: +# +# wccp2_service_info protocol= flags=,.. +# priority= ports=,.. +# +# The relevant WCCPv2 flags: +# + src_ip_hash, dst_ip_hash +# + source_port_hash, dst_port_hash +# + src_ip_alt_hash, dst_ip_alt_hash +# + src_port_alt_hash, dst_port_alt_hash +# + ports_source +# +# The port list can be one to eight entries. +# +# Example: +# +# wccp2_service_info 80 protocol=tcp flags=src_ip_hash,ports_source +# priority=240 ports=80 +# +# Note: the service id must have been defined by a previous +# 'wccp2_service dynamic ' entry. +#Default: +# none + +# TAG: wccp2_weight +# Each cache server gets assigned a set of the destination +# hash proportional to their weight. +#Default: +# wccp2_weight 10000 + +# TAG: wccp_address +#Default: +# wccp_address 0.0.0.0 + +# TAG: wccp2_address +# Use this option if you require WCCP to use a specific +# interface address. +# +# The default behavior is to not bind to any specific address. +#Default: +# wccp2_address 0.0.0.0 + +# PERSISTENT CONNECTION HANDLING +# ----------------------------------------------------------------------------- +# +# Also see "pconn_timeout" in the TIMEOUTS section + +# TAG: client_persistent_connections +#Default: +# client_persistent_connections on + +# TAG: server_persistent_connections +# Persistent connection support for clients and servers. By +# default, Squid uses persistent connections (when allowed) +# with its clients and servers. You can use these options to +# disable persistent connections with clients and/or servers. +#Default: +# server_persistent_connections on + +# TAG: persistent_connection_after_error +# With this directive the use of persistent connections after +# HTTP errors can be disabled. Useful if you have clients +# who fail to handle errors on persistent connections proper. +#Default: +# persistent_connection_after_error on + +# TAG: detect_broken_pconn +# Some servers have been found to incorrectly signal the use +# of HTTP/1.0 persistent connections even on replies not +# compatible, causing significant delays. This server problem +# has mostly been seen on redirects. +# +# By enabling this directive Squid attempts to detect such +# broken replies and automatically assume the reply is finished +# after 10 seconds timeout. +#Default: +# detect_broken_pconn off + +# CACHE DIGEST OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: digest_generation +# This controls whether the server will generate a Cache Digest +# of its contents. By default, Cache Digest generation is +# enabled if Squid is compiled with --enable-cache-digests defined. +#Default: +# digest_generation on + +# TAG: digest_bits_per_entry +# This is the number of bits of the server's Cache Digest which +# will be associated with the Digest entry for a given HTTP +# Method and URL (public key) combination. The default is 5. +#Default: +# digest_bits_per_entry 5 + +# TAG: digest_rebuild_period (seconds) +# This is the wait time between Cache Digest rebuilds. +#Default: +# digest_rebuild_period 1 hour + +# TAG: digest_rewrite_period (seconds) +# This is the wait time between Cache Digest writes to +# disk. +#Default: +# digest_rewrite_period 1 hour + +# TAG: digest_swapout_chunk_size (bytes) +# This is the number of bytes of the Cache Digest to write to +# disk at a time. It defaults to 4096 bytes (4KB), the Squid +# default swap page. +#Default: +# digest_swapout_chunk_size 4096 bytes + +# TAG: digest_rebuild_chunk_percentage (percent, 0-100) +# This is the percentage of the Cache Digest to be scanned at a +# time. By default it is set to 10% of the Cache Digest. +#Default: +# digest_rebuild_chunk_percentage 10 + +# SNMP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: snmp_port +# The port number where Squid listens for SNMP requests. To enable +# SNMP support set this to a suitable port number. Port number +# 3401 is often used for the Squid SNMP agent. By default it's +# set to "0" (disabled) +# +# Example: +# snmp_port 3401 +#Default: +# snmp_port 0 + +# TAG: snmp_access +# Allowing or denying access to the SNMP port. +# +# All access to the agent is denied by default. +# usage: +# +# snmp_access allow|deny [!]aclname ... +# +# This clause only supports fast acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Example: +# snmp_access allow snmppublic localhost +# snmp_access deny all +#Default: +# snmp_access deny all + +# TAG: snmp_incoming_address +#Default: +# snmp_incoming_address any_addr + +# TAG: snmp_outgoing_address +# Just like 'udp_incoming_address', but for the SNMP port. +# +# snmp_incoming_address is used for the SNMP socket receiving +# messages from SNMP agents. +# snmp_outgoing_address is used for SNMP packets returned to SNMP +# agents. +# +# The default snmp_incoming_address is to listen on all +# available network interfaces. +# +# If snmp_outgoing_address is not set it will use the same socket +# as snmp_incoming_address. Only change this if you want to have +# SNMP replies sent using another address than where this Squid +# listens for SNMP queries. +# +# NOTE, snmp_incoming_address and snmp_outgoing_address can not have +# the same value since they both use port 3401. +#Default: +# snmp_outgoing_address no_addr + +# ICP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: icp_port +# The port number where Squid sends and receives ICP queries to +# and from neighbor caches. The standard UDP port for ICP is 3130. +# Default is disabled (0). +# +# Example: +# icp_port 3130 +#Default: +# icp_port 0 + +# TAG: htcp_port +# The port number where Squid sends and receives HTCP queries to +# and from neighbor caches. To turn it on you want to set it to +# 4827. By default it is set to "0" (disabled). +# +# Example: +# htcp_port 4827 +#Default: +# htcp_port 0 + +# TAG: log_icp_queries on|off +# If set, ICP queries are logged to access.log. You may wish +# do disable this if your ICP load is VERY high to speed things +# up or to simplify log analysis. +#Default: +# log_icp_queries on + +# TAG: udp_incoming_address +# udp_incoming_address is used for UDP packets received from other +# caches. +# +# The default behavior is to not bind to any specific address. +# +# Only change this if you want to have all UDP queries received on +# a specific interface/address. +# +# NOTE: udp_incoming_address is used by the ICP, HTCP, and DNS +# modules. Altering it will affect all of them in the same manner. +# +# see also; udp_outgoing_address +# +# NOTE, udp_incoming_address and udp_outgoing_address can not +# have the same value since they both use the same port. +#Default: +# udp_incoming_address any_addr + +# TAG: udp_outgoing_address +# udp_outgoing_address is used for UDP packets sent out to other +# caches. +# +# The default behavior is to not bind to any specific address. +# +# Instead it will use the same socket as udp_incoming_address. +# Only change this if you want to have UDP queries sent using another +# address than where this Squid listens for UDP queries from other +# caches. +# +# NOTE: udp_outgoing_address is used by the ICP, HTCP, and DNS +# modules. Altering it will affect all of them in the same manner. +# +# see also; udp_incoming_address +# +# NOTE, udp_incoming_address and udp_outgoing_address can not +# have the same value since they both use the same port. +#Default: +# udp_outgoing_address no_addr + +# TAG: icp_hit_stale on|off +# If you want to return ICP_HIT for stale cache objects, set this +# option to 'on'. If you have sibling relationships with caches +# in other administrative domains, this should be 'off'. If you only +# have sibling relationships with caches under your control, +# it is probably okay to set this to 'on'. +# If set to 'on', your siblings should use the option "allow-miss" +# on their cache_peer lines for connecting to you. +#Default: +# icp_hit_stale off + +# TAG: minimum_direct_hops +# If using the ICMP pinging stuff, do direct fetches for sites +# which are no more than this many hops away. +#Default: +# minimum_direct_hops 4 + +# TAG: minimum_direct_rtt +# If using the ICMP pinging stuff, do direct fetches for sites +# which are no more than this many rtt milliseconds away. +#Default: +# minimum_direct_rtt 400 + +# TAG: netdb_low +#Default: +# netdb_low 900 + +# TAG: netdb_high +# The low and high water marks for the ICMP measurement +# database. These are counts, not percents. The defaults are +# 900 and 1000. When the high water mark is reached, database +# entries will be deleted until the low mark is reached. +#Default: +# netdb_high 1000 + +# TAG: netdb_ping_period +# The minimum period for measuring a site. There will be at +# least this much delay between successive pings to the same +# network. The default is five minutes. +#Default: +# netdb_ping_period 5 minutes + +# TAG: query_icmp on|off +# If you want to ask your peers to include ICMP data in their ICP +# replies, enable this option. +# +# If your peer has configured Squid (during compilation) with +# '--enable-icmp' that peer will send ICMP pings to origin server +# sites of the URLs it receives. If you enable this option the +# ICP replies from that peer will include the ICMP data (if available). +# Then, when choosing a parent cache, Squid will choose the parent with +# the minimal RTT to the origin server. When this happens, the +# hierarchy field of the access.log will be +# "CLOSEST_PARENT_MISS". This option is off by default. +#Default: +# query_icmp off + +# TAG: test_reachability on|off +# When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH +# instead of ICP_MISS if the target host is NOT in the ICMP +# database, or has a zero RTT. +#Default: +# test_reachability off + +# TAG: icp_query_timeout (msec) +# Normally Squid will automatically determine an optimal ICP +# query timeout value based on the round-trip-time of recent ICP +# queries. If you want to override the value determined by +# Squid, set this 'icp_query_timeout' to a non-zero value. This +# value is specified in MILLISECONDS, so, to use a 2-second +# timeout (the old default), you would write: +# +# icp_query_timeout 2000 +#Default: +# icp_query_timeout 0 + +# TAG: maximum_icp_query_timeout (msec) +# Normally the ICP query timeout is determined dynamically. But +# sometimes it can lead to very large values (say 5 seconds). +# Use this option to put an upper limit on the dynamic timeout +# value. Do NOT use this option to always use a fixed (instead +# of a dynamic) timeout value. To set a fixed timeout see the +# 'icp_query_timeout' directive. +#Default: +# maximum_icp_query_timeout 2000 + +# TAG: minimum_icp_query_timeout (msec) +# Normally the ICP query timeout is determined dynamically. But +# sometimes it can lead to very small timeouts, even lower than +# the normal latency variance on your link due to traffic. +# Use this option to put an lower limit on the dynamic timeout +# value. Do NOT use this option to always use a fixed (instead +# of a dynamic) timeout value. To set a fixed timeout see the +# 'icp_query_timeout' directive. +#Default: +# minimum_icp_query_timeout 5 + +# TAG: background_ping_rate time-units +# Controls how often the ICP pings are sent to siblings that +# have background-ping set. +#Default: +# background_ping_rate 10 seconds + +# MULTICAST ICP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: mcast_groups +# This tag specifies a list of multicast groups which your server +# should join to receive multicasted ICP queries. +# +# NOTE! Be very careful what you put here! Be sure you +# understand the difference between an ICP _query_ and an ICP +# _reply_. This option is to be set only if you want to RECEIVE +# multicast queries. Do NOT set this option to SEND multicast +# ICP (use cache_peer for that). ICP replies are always sent via +# unicast, so this option does not affect whether or not you will +# receive replies from multicast group members. +# +# You must be very careful to NOT use a multicast address which +# is already in use by another group of caches. +# +# If you are unsure about multicast, please read the Multicast +# chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/). +# +# Usage: mcast_groups 239.128.16.128 224.0.1.20 +# +# By default, Squid doesn't listen on any multicast groups. +#Default: +# none + +# TAG: mcast_miss_addr +# Note: This option is only available if Squid is rebuilt with the +# -DMULTICAST_MISS_STREAM define +# +# If you enable this option, every "cache miss" URL will +# be sent out on the specified multicast address. +# +# Do not enable this option unless you are are absolutely +# certain you understand what you are doing. +#Default: +# mcast_miss_addr no_addr + +# TAG: mcast_miss_ttl +# Note: This option is only available if Squid is rebuilt with the +# -DMULTICAST_MISS_STREAM define +# +# This is the time-to-live value for packets multicasted +# when multicasting off cache miss URLs is enabled. By +# default this is set to 'site scope', i.e. 16. +#Default: +# mcast_miss_ttl 16 + +# TAG: mcast_miss_port +# Note: This option is only available if Squid is rebuilt with the +# -DMULTICAST_MISS_STREAM define +# +# This is the port number to be used in conjunction with +# 'mcast_miss_addr'. +#Default: +# mcast_miss_port 3135 + +# TAG: mcast_miss_encode_key +# Note: This option is only available if Squid is rebuilt with the +# -DMULTICAST_MISS_STREAM define +# +# The URLs that are sent in the multicast miss stream are +# encrypted. This is the encryption key. +#Default: +# mcast_miss_encode_key XXXXXXXXXXXXXXXX + +# TAG: mcast_icp_query_timeout (msec) +# For multicast peers, Squid regularly sends out ICP "probes" to +# count how many other peers are listening on the given multicast +# address. This value specifies how long Squid should wait to +# count all the replies. The default is 2000 msec, or 2 +# seconds. +#Default: +# mcast_icp_query_timeout 2000 + +# INTERNAL ICON OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: icon_directory +# Where the icons are stored. These are normally kept in +# /usr/share/squid/icons +#Default: +# icon_directory /usr/share/squid/icons + +# TAG: global_internal_static +# This directive controls is Squid should intercept all requests for +# /squid-internal-static/ no matter which host the URL is requesting +# (default on setting), or if nothing special should be done for +# such URLs (off setting). The purpose of this directive is to make +# icons etc work better in complex cache hierarchies where it may +# not always be possible for all corners in the cache mesh to reach +# the server generating a directory listing. +#Default: +# global_internal_static on + +# TAG: short_icon_urls +# If this is enabled Squid will use short URLs for icons. +# If disabled it will revert to the old behavior of including +# it's own name and port in the URL. +# +# If you run a complex cache hierarchy with a mix of Squid and +# other proxies you may need to disable this directive. +#Default: +# short_icon_urls on + +# ERROR PAGE OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: error_directory +# If you wish to create your own versions of the default +# error files to customize them to suit your company copy +# the error/template files to another directory and point +# this tag at them. +# +# WARNING: This option will disable multi-language support +# on error pages if used. +# +# The squid developers are interested in making squid available in +# a wide variety of languages. If you are making translations for a +# language that Squid does not currently provide please consider +# contributing your translation back to the project. +# http://wiki.squid-cache.org/Translations +# +# The squid developers working on translations are happy to supply drop-in +# translated error files in exchange for any new language contributions. +#Default: +# none + +# TAG: error_default_language +# Set the default language which squid will send error pages in +# if no existing translation matches the clients language +# preferences. +# +# If unset (default) generic English will be used. +# +# The squid developers are interested in making squid available in +# a wide variety of languages. If you are interested in making +# translations for any language see the squid wiki for details. +# http://wiki.squid-cache.org/Translations +#Default: +# none + +# TAG: error_log_languages +# Log to cache.log what languages users are attempting to +# auto-negotiate for translations. +# +# Successful negotiations are not logged. Only failures +# have meaning to indicate that Squid may need an upgrade +# of its error page translations. +#Default: +# error_log_languages on + +# TAG: err_page_stylesheet +# CSS Stylesheet to pattern the display of Squid default error pages. +# +# For information on CSS see http://www.w3.org/Style/CSS/ +#Default: +# err_page_stylesheet /etc/squid/errorpage.css + +# TAG: err_html_text +# HTML text to include in error messages. Make this a "mailto" +# URL to your admin address, or maybe just a link to your +# organizations Web page. +# +# To include this in your error messages, you must rewrite +# the error template files (found in the "errors" directory). +# Wherever you want the 'err_html_text' line to appear, +# insert a %L tag in the error template file. +#Default: +# none + +# TAG: email_err_data on|off +# If enabled, information about the occurred error will be +# included in the mailto links of the ERR pages (if %W is set) +# so that the email body contains the data. +# Syntax is %w +#Default: +# email_err_data on + +# TAG: deny_info +# Usage: deny_info err_page_name acl +# or deny_info http://... acl +# or deny_info TCP_RESET acl +# +# This can be used to return a ERR_ page for requests which +# do not pass the 'http_access' rules. Squid remembers the last +# acl it evaluated in http_access, and if a 'deny_info' line exists +# for that ACL Squid returns a corresponding error page. +# +# The acl is typically the last acl on the http_access deny line which +# denied access. The exceptions to this rule are: +# - When Squid needs to request authentication credentials. It's then +# the first authentication related acl encountered +# - When none of the http_access lines matches. It's then the last +# acl processed on the last http_access line. +# +# NP: If providing your own custom error pages with error_directory +# you may also specify them by your custom file name: +# Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys +# +# Alternatively you can specify an error URL. The browsers will +# get redirected (302 or 307) to the specified URL. %s in the redirection +# URL will be replaced by the requested URL. +# +# Alternatively you can tell Squid to reset the TCP connection +# by specifying TCP_RESET. +#Default: +# none + +# OPTIONS INFLUENCING REQUEST FORWARDING +# ----------------------------------------------------------------------------- + +# TAG: nonhierarchical_direct +# By default, Squid will send any non-hierarchical requests +# (matching hierarchy_stoplist or not cacheable request type) direct +# to origin servers. +# +# If you set this to off, Squid will prefer to send these +# requests to parents. +# +# Note that in most configurations, by turning this off you will only +# add latency to these request without any improvement in global hit +# ratio. +# +# If you are inside an firewall see never_direct instead of +# this directive. +#Default: +# nonhierarchical_direct on + +# TAG: prefer_direct +# Normally Squid tries to use parents for most requests. If you for some +# reason like it to first try going direct and only use a parent if +# going direct fails set this to on. +# +# By combining nonhierarchical_direct off and prefer_direct on you +# can set up Squid to use a parent as a backup path if going direct +# fails. +# +# Note: If you want Squid to use parents for all requests see +# the never_direct directive. prefer_direct only modifies how Squid +# acts on cacheable requests. +#Default: +# prefer_direct off + +# TAG: always_direct +# Usage: always_direct allow|deny [!]aclname ... +# +# Here you can use ACL elements to specify requests which should +# ALWAYS be forwarded by Squid to the origin servers without using +# any peers. For example, to always directly forward requests for +# local servers ignoring any parents or siblings you may have use +# something like: +# +# acl local-servers dstdomain my.domain.net +# always_direct allow local-servers +# +# To always forward FTP requests directly, use +# +# acl FTP proto FTP +# always_direct allow FTP +# +# NOTE: There is a similar, but opposite option named +# 'never_direct'. You need to be aware that "always_direct deny +# foo" is NOT the same thing as "never_direct allow foo". You +# may need to use a deny rule to exclude a more-specific case of +# some other rule. Example: +# +# acl local-external dstdomain external.foo.net +# acl local-servers dstdomain .foo.net +# always_direct deny local-external +# always_direct allow local-servers +# +# NOTE: If your goal is to make the client forward the request +# directly to the origin server bypassing Squid then this needs +# to be done in the client configuration. Squid configuration +# can only tell Squid how Squid should fetch the object. +# +# NOTE: This directive is not related to caching. The replies +# is cached as usual even if you use always_direct. To not cache +# the replies see the 'cache' directive. +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# none + +# TAG: never_direct +# Usage: never_direct allow|deny [!]aclname ... +# +# never_direct is the opposite of always_direct. Please read +# the description for always_direct if you have not already. +# +# With 'never_direct' you can use ACL elements to specify +# requests which should NEVER be forwarded directly to origin +# servers. For example, to force the use of a proxy for all +# requests, except those in your local domain use something like: +# +# acl local-servers dstdomain .foo.net +# never_direct deny local-servers +# never_direct allow all +# +# or if Squid is inside a firewall and there are local intranet +# servers inside the firewall use something like: +# +# acl local-intranet dstdomain .foo.net +# acl local-external dstdomain external.foo.net +# always_direct deny local-external +# always_direct allow local-intranet +# never_direct allow all +# +# This clause supports both fast and slow acl types. +# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. +#Default: +# none + +# ADVANCED NETWORKING OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: incoming_icp_average +#Default: +# incoming_icp_average 6 + +# TAG: incoming_http_average +#Default: +# incoming_http_average 4 + +# TAG: incoming_dns_average +#Default: +# incoming_dns_average 4 + +# TAG: min_icp_poll_cnt +#Default: +# min_icp_poll_cnt 8 + +# TAG: min_dns_poll_cnt +#Default: +# min_dns_poll_cnt 8 + +# TAG: min_http_poll_cnt +# Heavy voodoo here. I can't even believe you are reading this. +# Are you crazy? Don't even think about adjusting these unless +# you understand the algorithms in comm_select.c first! +#Default: +# min_http_poll_cnt 8 + +# TAG: accept_filter +# FreeBSD: +# +# The name of an accept(2) filter to install on Squid's +# listen socket(s). This feature is perhaps specific to +# FreeBSD and requires support in the kernel. +# +# The 'httpready' filter delays delivering new connections +# to Squid until a full HTTP request has been received. +# See the accf_http(9) man page for details. +# +# The 'dataready' filter delays delivering new connections +# to Squid until there is some data to process. +# See the accf_dataready(9) man page for details. +# +# Linux: +# +# The 'data' filter delays delivering of new connections +# to Squid until there is some data to process by TCP_ACCEPT_DEFER. +# You may optionally specify a number of seconds to wait by +# 'data=N' where N is the number of seconds. Defaults to 30 +# if not specified. See the tcp(7) man page for details. +#EXAMPLE: +## FreeBSD +#accept_filter httpready +## Linux +#accept_filter data +#Default: +# none + +# TAG: client_ip_max_connections +# Set an absolute limit on the number of connections a single +# client IP can use. Any more than this and Squid will begin to drop +# new connections from the client until it closes some links. +# +# Note that this is a global limit. It affects all HTTP, HTCP, Gopher and FTP +# connections from the client. For finer control use the ACL access controls. +# +# Requires client_db to be enabled (the default). +# +# WARNING: This may noticably slow down traffic received via external proxies +# or NAT devices and cause them to rebound error messages back to their clients. +#Default: +# client_ip_max_connections -1 + +# TAG: tcp_recv_bufsize (bytes) +# Size of receive buffer to set for TCP sockets. Probably just +# as easy to change your kernel's default. Set to zero to use +# the default buffer size. +#Default: +# tcp_recv_bufsize 0 bytes + +# ICAP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: icap_enable on|off +# If you want to enable the ICAP module support, set this to on. +#Default: +# icap_enable off + +# TAG: icap_connect_timeout +# This parameter specifies how long to wait for the TCP connect to +# the requested ICAP server to complete before giving up and either +# terminating the HTTP transaction or bypassing the failure. +# +# The default for optional services is peer_connect_timeout. +# The default for essential services is connect_timeout. +# If this option is explicitly set, its value applies to all services. +#Default: +# none + +# TAG: icap_io_timeout time-units +# This parameter specifies how long to wait for an I/O activity on +# an established, active ICAP connection before giving up and +# either terminating the HTTP transaction or bypassing the +# failure. +# +# The default is read_timeout. +#Default: +# none + +# TAG: icap_service_failure_limit +# The limit specifies the number of failures that Squid tolerates +# when establishing a new TCP connection with an ICAP service. If +# the number of failures exceeds the limit, the ICAP service is +# not used for new ICAP requests until it is time to refresh its +# OPTIONS. The per-service failure counter is reset to zero each +# time Squid fetches new service OPTIONS. +# +# A negative value disables the limit. Without the limit, an ICAP +# service will not be considered down due to connectivity failures +# between ICAP OPTIONS requests. +#Default: +# icap_service_failure_limit 10 + +# TAG: icap_service_revival_delay +# The delay specifies the number of seconds to wait after an ICAP +# OPTIONS request failure before requesting the options again. The +# failed ICAP service is considered "down" until fresh OPTIONS are +# fetched. +# +# The actual delay cannot be smaller than the hardcoded minimum +# delay of 30 seconds. +#Default: +# icap_service_revival_delay 180 + +# TAG: icap_preview_enable on|off +# The ICAP Preview feature allows the ICAP server to handle the +# HTTP message by looking only at the beginning of the message body +# or even without receiving the body at all. In some environments, +# previews greatly speedup ICAP processing. +# +# During an ICAP OPTIONS transaction, the server may tell Squid what +# HTTP messages should be previewed and how big the preview should be. +# Squid will not use Preview if the server did not request one. +# +# To disable ICAP Preview for all ICAP services, regardless of +# individual ICAP server OPTIONS responses, set this option to "off". +#Example: +#icap_preview_enable off +#Default: +# icap_preview_enable on + +# TAG: icap_preview_size +# The default size of preview data to be sent to the ICAP server. +# -1 means no preview. This value might be overwritten on a per server +# basis by OPTIONS requests. +#Default: +# icap_preview_size -1 + +# TAG: icap_default_options_ttl +# The default TTL value for ICAP OPTIONS responses that don't have +# an Options-TTL header. +#Default: +# icap_default_options_ttl 60 + +# TAG: icap_persistent_connections on|off +# Whether or not Squid should use persistent connections to +# an ICAP server. +#Default: +# icap_persistent_connections on + +# TAG: icap_send_client_ip on|off +# If enabled, Squid shares HTTP client IP information with adaptation +# services. For ICAP, Squid adds the X-Client-IP header to ICAP requests. +# For eCAP, Squid sets the libecap::metaClientIp transaction option. +# +# See also: adaptation_uses_indirect_client +#Default: +# icap_send_client_ip off + +# TAG: icap_send_client_username on|off +# This sends authenticated HTTP client username (if available) to +# the ICAP service. The username value is encoded based on the +# icap_client_username_encode option and is sent using the header +# specified by the icap_client_username_header option. +#Default: +# icap_send_client_username off + +# TAG: icap_client_username_header +# ICAP request header name to use for send_client_username. +#Default: +# icap_client_username_header X-Client-Username + +# TAG: icap_client_username_encode on|off +# Whether to base64 encode the authenticated client username. +#Default: +# icap_client_username_encode off + +# TAG: icap_service +# Defines a single ICAP service using the following format: +# +# icap_service service_name vectoring_point [options] service_url +# +# service_name: ID +# an opaque identifier which must be unique in squid.conf +# +# vectoring_point: reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache +# This specifies at which point of transaction processing the +# ICAP service should be activated. *_postcache vectoring points +# are not yet supported. +# +# service_url: icap://servername:port/servicepath +# ICAP server and service location. +# +# ICAP does not allow a single service to handle both REQMOD and RESPMOD +# transactions. Squid does not enforce that requirement. You can specify +# services with the same service_url and different vectoring_points. You +# can even specify multiple identical services as long as their +# service_names differ. +# +# +# Service options are separated by white space. ICAP services support +# the following name=value options: +# +# bypass=on|off|1|0 +# If set to 'on' or '1', the ICAP service is treated as +# optional. If the service cannot be reached or malfunctions, +# Squid will try to ignore any errors and process the message as +# if the service was not enabled. No all ICAP errors can be +# bypassed. If set to 0, the ICAP service is treated as +# essential and all ICAP errors will result in an error page +# returned to the HTTP client. +# +# Bypass is off by default: services are treated as essential. +# +# routing=on|off|1|0 +# If set to 'on' or '1', the ICAP service is allowed to +# dynamically change the current message adaptation plan by +# returning a chain of services to be used next. The services +# are specified using the X-Next-Services ICAP response header +# value, formatted as a comma-separated list of service names. +# Each named service should be configured in squid.conf and +# should have the same method and vectoring point as the current +# ICAP transaction. Services violating these rules are ignored. +# An empty X-Next-Services value results in an empty plan which +# ends the current adaptation. +# +# Routing is not allowed by default: the ICAP X-Next-Services +# response header is ignored. +# +# ipv6=on|off +# Only has effect on split-stack systems. The default on those systems +# is to use IPv4-only connections. When set to 'on' this option will +# make Squid use IPv6-only connections to contact this ICAP service. +# +# Older icap_service format without optional named parameters is +# deprecated but supported for backward compatibility. +# +#Example: +#icap_service svcBlocker reqmod_precache bypass=0 icap://icap1.mydomain.net:1344/reqmod +#icap_service svcLogger reqmod_precache routing=on icap://icap2.mydomain.net:1344/respmod +#Default: +# none + +# TAG: icap_class +# This deprecated option was documented to define an ICAP service +# chain, even though it actually defined a set of similar, redundant +# services, and the chains were not supported. +# +# To define a set of redundant services, please use the +# adaptation_service_set directive. For service chains, use +# adaptation_service_chain. +#Default: +# none + +# TAG: icap_access +# This option is deprecated. Please use adaptation_access, which +# has the same ICAP functionality, but comes with better +# documentation, and eCAP support. +#Default: +# none + +# eCAP OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: ecap_enable on|off +# Note: This option is only available if Squid is rebuilt with the +# --enable-ecap option +# +# Controls whether eCAP support is enabled. +#Default: +# ecap_enable off + +# TAG: ecap_service +# Note: This option is only available if Squid is rebuilt with the +# --enable-ecap option +# +# Defines a single eCAP service +# +# ecap_service servicename vectoring_point bypass service_url +# +# vectoring_point = reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache +# This specifies at which point of transaction processing the +# eCAP service should be activated. *_postcache vectoring points +# are not yet supported. +# bypass = 1|0 +# If set to 1, the eCAP service is treated as optional. If the +# service cannot be reached or malfunctions, Squid will try to +# ignore any errors and process the message as if the service +# was not enabled. No all eCAP errors can be bypassed. +# If set to 0, the eCAP service is treated as essential and all +# eCAP errors will result in an error page returned to the +# HTTP client. +# service_url = ecap://vendor/service_name?custom&cgi=style¶meters=optional +# +#Example: +#ecap_service service_1 reqmod_precache 0 ecap://filters-R-us/leakDetector?on_error=block +#ecap_service service_2 respmod_precache 1 icap://filters-R-us/virusFilter?config=/etc/vf.cfg +#Default: +# none + +# TAG: loadable_modules +# Instructs Squid to load the specified dynamic module(s) or activate +# preloaded module(s). +#Example: +#loadable_modules /usr/lib/MinimalAdapter.so +#Default: +# none + +# MESSAGE ADAPTATION OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: adaptation_service_set +# +# Configures an ordered set of similar, redundant services. This is +# useful when hot standby or backup adaptation servers are available. +# +# adaptation_service_set set_name service_name1 service_name2 ... +# +# The named services are used in the set declaration order. The first +# applicable adaptation service from the set is used first. The next +# applicable service is tried if and only if the transaction with the +# previous service fails and the message waiting to be adapted is still +# intact. +# +# When adaptation starts, broken services are ignored as if they were +# not a part of the set. A broken service is a down optional service. +# +# The services in a set must be attached to the same vectoring point +# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD). +# +# If all services in a set are optional then adaptation failures are +# bypassable. If all services in the set are essential, then a +# transaction failure with one service may still be retried using +# another service from the set, but when all services fail, the master +# transaction fails as well. +# +# A set may contain a mix of optional and essential services, but that +# is likely to lead to surprising results because broken services become +# ignored (see above), making previously bypassable failures fatal. +# Technically, it is the bypassability of the last failed service that +# matters. +# +# See also: adaptation_access adaptation_service_chain +# +#Example: +#adaptation_service_set svcBlocker urlFilterPrimary urlFilterBackup +#adaptation service_set svcLogger loggerLocal loggerRemote +#Default: +# none + +# TAG: adaptation_service_chain +# +# Configures a list of complementary services that will be applied +# one-by-one, forming an adaptation chain or pipeline. This is useful +# when Squid must perform different adaptations on the same message. +# +# adaptation_service_chain chain_name service_name1 svc_name2 ... +# +# The named services are used in the chain declaration order. The first +# applicable adaptation service from the chain is used first. The next +# applicable service is applied to the successful adaptation results of +# the previous service in the chain. +# +# When adaptation starts, broken services are ignored as if they were +# not a part of the chain. A broken service is a down optional service. +# +# Request satisfaction terminates the adaptation chain because Squid +# does not currently allow declaration of RESPMOD services at the +# "reqmod_precache" vectoring point (see icap_service or ecap_service). +# +# The services in a chain must be attached to the same vectoring point +# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD). +# +# A chain may contain a mix of optional and essential services. If an +# essential adaptation fails (or the failure cannot be bypassed for +# other reasons), the master transaction fails. Otherwise, the failure +# is bypassed as if the failed adaptation service was not in the chain. +# +# See also: adaptation_access adaptation_service_set +# +#Example: +#adaptation_service_chain svcRequest requestLogger urlFilter leakDetector +#Default: +# none + +# TAG: adaptation_access +# Sends an HTTP transaction to an ICAP or eCAP adaptation service. +# +# adaptation_access service_name allow|deny [!]aclname... +# adaptation_access set_name allow|deny [!]aclname... +# +# At each supported vectoring point, the adaptation_access +# statements are processed in the order they appear in this +# configuration file. Statements pointing to the following services +# are ignored (i.e., skipped without checking their ACL): +# +# - services serving different vectoring points +# - "broken-but-bypassable" services +# - "up" services configured to ignore such transactions +# (e.g., based on the ICAP Transfer-Ignore header). +# +# When a set_name is used, all services in the set are checked +# using the same rules, to find the first applicable one. See +# adaptation_service_set for details. +# +# If an access list is checked and there is a match, the +# processing stops: For an "allow" rule, the corresponding +# adaptation service is used for the transaction. For a "deny" +# rule, no adaptation service is activated. +# +# It is currently not possible to apply more than one adaptation +# service at the same vectoring point to the same HTTP transaction. +# +# See also: icap_service and ecap_service +# +#Example: +#adaptation_access service_1 allow all +#Default: +# none + +# TAG: adaptation_service_iteration_limit +# Limits the number of iterations allowed when applying adaptation +# services to a message. If your longest adaptation set or chain +# may have more than 16 services, increase the limit beyond its +# default value of 16. If detecting infinite iteration loops sooner +# is critical, make the iteration limit match the actual number +# of services in your longest adaptation set or chain. +# +# Infinite adaptation loops are most likely with routing services. +# +# See also: icap_service routing=1 +#Default: +# adaptation_service_iteration_limit 16 + +# TAG: adaptation_masterx_shared_names +# For each master transaction (i.e., the HTTP request and response +# sequence, including all related ICAP and eCAP exchanges), Squid +# maintains a table of metadata. The table entries are (name, value) +# pairs shared among eCAP and ICAP exchanges. The table is destroyed +# with the master transaction. +# +# This option specifies the table entry names that Squid must accept +# from and forward to the adaptation transactions. +# +# An ICAP REQMOD or RESPMOD transaction may set an entry in the +# shared table by returning an ICAP header field with a name +# specified in adaptation_masterx_shared_names. Squid will store +# and forward that ICAP header field to subsequent ICAP +# transactions within the same master transaction scope. +# +# Only one shared entry name is supported at this time. +# +#Example: +## share authentication information among ICAP services +#adaptation_masterx_shared_names X-Subscriber-ID +#Default: +# none + +# TAG: icap_retry +# This ACL determines which retriable ICAP transactions are +# retried. Transactions that received a complete ICAP response +# and did not have to consume or produce HTTP bodies to receive +# that response are usually retriable. +# +# icap_retry allow|deny [!]aclname ... +# +# Squid automatically retries some ICAP I/O timeouts and errors +# due to persistent connection race conditions. +# +# See also: icap_retry_limit +#Default: +# icap_retry deny all + +# TAG: icap_retry_limit +# Limits the number of retries allowed. When set to zero (default), +# no retries are allowed. +# +# Communication errors due to persistent connection race +# conditions are unavoidable, automatically retried, and do not +# count against this limit. +# +# See also: icap_retry +#Default: +# icap_retry_limit 0 + +# DNS OPTIONS +# ----------------------------------------------------------------------------- + +# TAG: check_hostnames +# For security and stability reasons Squid can check +# hostnames for Internet standard RFC compliance. If you want +# Squid to perform these checks turn this directive on. +#Default: +# check_hostnames off + +# TAG: allow_underscore +# Underscore characters is not strictly allowed in Internet hostnames +# but nevertheless used by many sites. Set this to off if you want +# Squid to be strict about the standard. +# This check is performed only when check_hostnames is set to on. +#Default: +# allow_underscore on + +# TAG: cache_dns_program +# Note: This option is only available if Squid is rebuilt with the +# --disable-internal-dns option +# +# Specify the location of the executable for dnslookup process. +#Default: +# cache_dns_program /usr/lib/squid/dnsserver + +# TAG: dns_children +# Note: This option is only available if Squid is rebuilt with the +# --disable-internal-dns option +# +# The number of processes spawn to service DNS name lookups. +# For heavily loaded caches on large servers, you should +# probably increase this value to at least 10. The maximum +# is 32. The default is 5. +# +# You must have at least one dnsserver process. +#Default: +# dns_children 5 + +# TAG: dns_retransmit_interval +# Initial retransmit interval for DNS queries. The interval is +# doubled each time all configured DNS servers have been tried. +# +#Default: +# dns_retransmit_interval 5 seconds + +# TAG: dns_timeout +# DNS Query timeout. If no response is received to a DNS query +# within this time all DNS servers for the queried domain +# are assumed to be unavailable. +#Default: +# dns_timeout 2 minutes + +# TAG: dns_defnames on|off +# Normally the RES_DEFNAMES resolver option is disabled +# (see res_init(3)). This prevents caches in a hierarchy +# from interpreting single-component hostnames locally. To allow +# Squid to handle single-component names, enable this option. +#Default: +# dns_defnames off + +# TAG: dns_nameservers +# Use this if you want to specify a list of DNS name servers +# (IP addresses) to use instead of those given in your +# /etc/resolv.conf file. +# On Windows platforms, if no value is specified here or in +# the /etc/resolv.conf file, the list of DNS name servers are +# taken from the Windows registry, both static and dynamic DHCP +# configurations are supported. +# +# Example: dns_nameservers 10.0.0.1 192.172.0.4 +#Default: +# none + +# TAG: hosts_file +# Location of the host-local IP name-address associations +# database. Most Operating Systems have such a file on different +# default locations: +# - Un*X & Linux: /etc/hosts +# - Windows NT/2000: %SystemRoot%\system32\drivers\etc\hosts +# (%SystemRoot% value install default is c:\winnt) +# - Windows XP/2003: %SystemRoot%\system32\drivers\etc\hosts +# (%SystemRoot% value install default is c:\windows) +# - Windows 9x/Me: %windir%\hosts +# (%windir% value is usually c:\windows) +# - Cygwin: /etc/hosts +# +# The file contains newline-separated definitions, in the +# form ip_address_in_dotted_form name [name ...] names are +# whitespace-separated. Lines beginning with an hash (#) +# character are comments. +# +# The file is checked at startup and upon configuration. +# If set to 'none', it won't be checked. +# If append_domain is used, that domain will be added to +# domain-local (i.e. not containing any dot character) host +# definitions. +#Default: +# hosts_file /etc/hosts + +# TAG: append_domain +# Appends local domain name to hostnames without any dots in +# them. append_domain must begin with a period. +# +# Be warned there are now Internet names with no dots in +# them using only top-domain names, so setting this may +# cause some Internet sites to become unavailable. +# +#Example: +# append_domain .yourdomain.com +#Default: +# none + +# TAG: ignore_unknown_nameservers +# By default Squid checks that DNS responses are received +# from the same IP addresses they are sent to. If they +# don't match, Squid ignores the response and writes a warning +# message to cache.log. You can allow responses from unknown +# nameservers by setting this option to 'off'. +#Default: +# ignore_unknown_nameservers on + +# TAG: dns_v4_fallback +# Standard practice with DNS is to lookup either A or AAAA records +# and use the results if it succeeds. Only looking up the other if +# the first attempt fails or otherwise produces no results. +# +# That policy however will cause squid to produce error pages for some +# servers that advertise AAAA but are unreachable over IPv6. +# +# If this is ON squid will always lookup both AAAA and A, using both. +# If this is OFF squid will lookup AAAA and only try A if none found. +# +# WARNING: There are some possibly unwanted side-effects with this on: +# *) Doubles the load placed by squid on the DNS network. +# *) May negatively impact connection delay times. +#Default: +# dns_v4_fallback on + +# TAG: dns_v4_first +# With the IPv6 Internet being as fast or faster than IPv4 Internet +# for most networks Squid prefers to contact websites over IPv6. +# +# This option reverses the order of preference to make Squid contact +# dual-stack websites over IPv4 first. Squid will still perform both +# IPv6 and IPv4 DNS lookups before connecting. +# +# WARNING: +# This option will restrict the situations under which IPv6 +# connectivity is used (and tested), potentially hiding network +# problem swhich would otherwise be detected and warned about. +#Default: +# dns_v4_first off + +# TAG: ipcache_size (number of entries) +#Default: +# ipcache_size 1024 + +# TAG: ipcache_low (percent) +#Default: +# ipcache_low 90 + +# TAG: ipcache_high (percent) +# The size, low-, and high-water marks for the IP cache. +#Default: +# ipcache_high 95 + +# TAG: fqdncache_size (number of entries) +# Maximum number of FQDN cache entries. +#Default: +# fqdncache_size 1024 + +# MISCELLANEOUS +# ----------------------------------------------------------------------------- + +# TAG: memory_pools on|off +# If set, Squid will keep pools of allocated (but unused) memory +# available for future use. If memory is a premium on your +# system and you believe your malloc library outperforms Squid +# routines, disable this. +#Default: +# memory_pools on + +# TAG: memory_pools_limit (bytes) +# Used only with memory_pools on: +# memory_pools_limit 50 MB +# +# If set to a non-zero value, Squid will keep at most the specified +# limit of allocated (but unused) memory in memory pools. All free() +# requests that exceed this limit will be handled by your malloc +# library. Squid does not pre-allocate any memory, just safe-keeps +# objects that otherwise would be free()d. Thus, it is safe to set +# memory_pools_limit to a reasonably high value even if your +# configuration will use less memory. +# +# If set to none, Squid will keep all memory it can. That is, there +# will be no limit on the total amount of memory used for safe-keeping. +# +# To disable memory allocation optimization, do not set +# memory_pools_limit to 0 or none. Set memory_pools to "off" instead. +# +# An overhead for maintaining memory pools is not taken into account +# when the limit is checked. This overhead is close to four bytes per +# object kept. However, pools may actually _save_ memory because of +# reduced memory thrashing in your malloc library. +#Default: +# memory_pools_limit 5 MB + +# TAG: forwarded_for on|off|transparent|truncate|delete +# If set to "on", Squid will append your client's IP address +# in the HTTP requests it forwards. By default it looks like: +# +# X-Forwarded-For: 192.1.2.3 +# +# If set to "off", it will appear as +# +# X-Forwarded-For: unknown +# +# If set to "transparent", Squid will not alter the +# X-Forwarded-For header in any way. +# +# If set to "delete", Squid will delete the entire +# X-Forwarded-For header. +# +# If set to "truncate", Squid will remove all existing +# X-Forwarded-For entries, and place itself as the sole entry. +#Default: +# forwarded_for on + +# TAG: cachemgr_passwd +# Specify passwords for cachemgr operations. +# +# Usage: cachemgr_passwd password action action ... +# +# Some valid actions are (see cache manager menu for a full list): +# 5min +# 60min +# asndb +# authenticator +# cbdata +# client_list +# comm_incoming +# config * +# counters +# delay +# digest_stats +# dns +# events +# filedescriptors +# fqdncache +# histograms +# http_headers +# info +# io +# ipcache +# mem +# menu +# netdb +# non_peers +# objects +# offline_toggle * +# pconn +# peer_select +# reconfigure * +# redirector +# refresh +# server_list +# shutdown * +# store_digest +# storedir +# utilization +# via_headers +# vm_objects +# +# * Indicates actions which will not be performed without a +# valid password, others can be performed if not listed here. +# +# To disable an action, set the password to "disable". +# To allow performing an action without a password, set the +# password to "none". +# +# Use the keyword "all" to set the same password for all actions. +# +#Example: +# cachemgr_passwd secret shutdown +# cachemgr_passwd lesssssssecret info stats/objects +# cachemgr_passwd disable all +#Default: +# none + +# TAG: client_db on|off +# If you want to disable collecting per-client statistics, +# turn off client_db here. +#Default: +# client_db on + +# TAG: refresh_all_ims on|off +# When you enable this option, squid will always check +# the origin server for an update when a client sends an +# If-Modified-Since request. Many browsers use IMS +# requests when the user requests a reload, and this +# ensures those clients receive the latest version. +# +# By default (off), squid may return a Not Modified response +# based on the age of the cached version. +#Default: +# refresh_all_ims off + +# TAG: reload_into_ims on|off +# When you enable this option, client no-cache or ``reload'' +# requests will be changed to If-Modified-Since requests. +# Doing this VIOLATES the HTTP standard. Enabling this +# feature could make you liable for problems which it +# causes. +# +# see also refresh_pattern for a more selective approach. +#Default: +# reload_into_ims off + +# TAG: maximum_single_addr_tries +# This sets the maximum number of connection attempts for a +# host that only has one address (for multiple-address hosts, +# each address is tried once). +# +# The default value is one attempt, the (not recommended) +# maximum is 255 tries. A warning message will be generated +# if it is set to a value greater than ten. +# +# Note: This is in addition to the request re-forwarding which +# takes place if Squid fails to get a satisfying response. +#Default: +# maximum_single_addr_tries 1 + +# TAG: retry_on_error +# If set to ON Squid will automatically retry requests when +# receiving an error response with status 403 (Forbidden), +# 500 (Internal Error), 501 or 503 (Service not available). +# Status 502 and 504 (Gateway errors) are always retried. +# +# This is mainly useful if you are in a complex cache hierarchy to +# work around access control errors. +# +# NOTE: This retry will attempt to find another working destination. +# Which is different from the server which just failed. +#Default: +# retry_on_error off + +# TAG: as_whois_server +# WHOIS server to query for AS numbers. NOTE: AS numbers are +# queried only when Squid starts up, not for every request. +#Default: +# as_whois_server whois.ra.net + +# TAG: offline_mode +# Enable this option and Squid will never try to validate cached +# objects. +#Default: +# offline_mode off + +# TAG: uri_whitespace +# What to do with requests that have whitespace characters in the +# URI. Options: +# +# strip: The whitespace characters are stripped out of the URL. +# This is the behavior recommended by RFC2396. +# deny: The request is denied. The user receives an "Invalid +# Request" message. +# allow: The request is allowed and the URI is not changed. The +# whitespace characters remain in the URI. Note the +# whitespace is passed to redirector processes if they +# are in use. +# encode: The request is allowed and the whitespace characters are +# encoded according to RFC1738. This could be considered +# a violation of the HTTP/1.1 +# RFC because proxies are not allowed to rewrite URI's. +# chop: The request is allowed and the URI is chopped at the +# first whitespace. This might also be considered a +# violation. +#Default: +# uri_whitespace strip + +# TAG: chroot +# Specifies a directory where Squid should do a chroot() while +# initializing. This also causes Squid to fully drop root +# privileges after initializing. This means, for example, if you +# use a HTTP port less than 1024 and try to reconfigure, you may +# get an error saying that Squid can not open the port. +#Default: +# none + +# TAG: balance_on_multiple_ip +# Modern IP resolvers in squid sort lookup results by preferred access. +# By default squid will use these IP in order and only rotates to +# the next listed when the most preffered fails. +# +# Some load balancing servers based on round robin DNS have been +# found not to preserve user session state across requests +# to different IP addresses. +# +# Enabling this directive Squid rotates IP's per request. +#Default: +# balance_on_multiple_ip off + +# TAG: pipeline_prefetch +# To boost the performance of pipelined requests to closer +# match that of a non-proxied environment Squid can try to fetch +# up to two requests in parallel from a pipeline. +# +# Defaults to off for bandwidth management and access logging +# reasons. +# +# WARNING: pipelining breaks NTLM and Negotiate/Kerberos authentication. +#Default: +# pipeline_prefetch off + +# TAG: high_response_time_warning (msec) +# If the one-minute median response time exceeds this value, +# Squid prints a WARNING with debug level 0 to get the +# administrators attention. The value is in milliseconds. +#Default: +# high_response_time_warning 0 + +# TAG: high_page_fault_warning +# If the one-minute average page fault rate exceeds this +# value, Squid prints a WARNING with debug level 0 to get +# the administrators attention. The value is in page faults +# per second. +#Default: +# high_page_fault_warning 0 + +# TAG: high_memory_warning +# If the memory usage (as determined by mallinfo) exceeds +# this amount, Squid prints a WARNING with debug level 0 to get +# the administrators attention. +#Default: +# high_memory_warning 0 KB + +# TAG: sleep_after_fork (microseconds) +# When this is set to a non-zero value, the main Squid process +# sleeps the specified number of microseconds after a fork() +# system call. This sleep may help the situation where your +# system reports fork() failures due to lack of (virtual) +# memory. Note, however, if you have a lot of child +# processes, these sleep delays will add up and your +# Squid will not service requests for some amount of time +# until all the child processes have been started. +# On Windows value less then 1000 (1 milliseconds) are +# rounded to 1000. +#Default: +# sleep_after_fork 0 + +# TAG: windows_ipaddrchangemonitor on|off +# On Windows Squid by default will monitor IP address changes and will +# reconfigure itself after any detected event. This is very useful for +# proxies connected to internet with dial-up interfaces. +# In some cases (a Proxy server acting as VPN gateway is one) it could be +# desiderable to disable this behaviour setting this to 'off'. +# Note: after changing this, Squid service must be restarted. +#Default: +# windows_ipaddrchangemonitor on + +# TAG: max_filedescriptors +# The maximum number of filedescriptors supported. +# +# The default "0" means Squid inherits the current ulimit setting. +# +# Note: Changing this requires a restart of Squid. Also +# not all comm loops supports large values. +#Default: +# max_filedescriptors 0 + diff --git a/hosts/profitbricks-build9-amd64/etc/squid3/squid.conf b/hosts/profitbricks-build9-amd64/etc/squid3/squid.conf deleted file mode 100644 index 697e59c0..00000000 --- a/hosts/profitbricks-build9-amd64/etc/squid3/squid.conf +++ /dev/null @@ -1,5787 +0,0 @@ -# WELCOME TO SQUID 3.1.20 -# ---------------------------- -# -# This is the documentation for the Squid configuration file. -# This documentation can also be found online at: -# http://www.squid-cache.org/Doc/config/ -# -# You may wish to look at the Squid home page and wiki for the -# FAQ and other documentation: -# http://www.squid-cache.org/ -# http://wiki.squid-cache.org/SquidFaq -# http://wiki.squid-cache.org/ConfigExamples -# -# This documentation shows what the defaults for various directives -# happen to be. If you don't need to change the default, you should -# leave the line out of your squid.conf in most cases. -# -# In some cases "none" refers to no default setting at all, -# while in other cases it refers to the value of the option -# - the comments for that keyword indicate if this is the case. -# - -# Configuration options can be included using the "include" directive. -# Include takes a list of files to include. Quoting and wildcards are -# supported. -# -# For example, -# -# include /path/to/included/file/squid.acl.config -# -# Includes can be nested up to a hard-coded depth of 16 levels. -# This arbitrary restriction is to prevent recursive include references -# from causing Squid entering an infinite loop whilst trying to load -# configuration files. - -# TAG: dns_testnames -# Remove this line. DNS is no longer tested on startup. -#Default: -# none - -# TAG: extension_methods -# Remove this line. All valid methods for HTTP are accepted by default. -#Default: -# none - -# TAG: incoming_rate -#Default: -# none - -# TAG: server_http11 -# Remove this line. HTTP/1.1 is supported by default. -#Default: -# none - -# TAG: upgrade_http0.9 -# Remove this line. ICY/1.0 streaming protocol is supported by default. -#Default: -# none - -# TAG: zph_local -# Alter these entries. Use the qos_flows directive instead. -#Default: -# none - -# TAG: header_access -# Since squid-3.0 replace with request_header_access or reply_header_access -# depending on whether you wish to match client requests or server replies. -#Default: -# none - -# TAG: httpd_accel_no_pmtu_disc -# Since squid-3.0 use the 'disable-pmtu-discovery' flag on http_port instead. -#Default: -# none - -# OPTIONS FOR AUTHENTICATION -# ----------------------------------------------------------------------------- - -# TAG: auth_param -# This is used to define parameters for the various authentication -# schemes supported by Squid. -# -# format: auth_param scheme parameter [setting] -# -# The order in which authentication schemes are presented to the client is -# dependent on the order the scheme first appears in config file. IE -# has a bug (it's not RFC 2617 compliant) in that it will use the basic -# scheme if basic is the first entry presented, even if more secure -# schemes are presented. For now use the order in the recommended -# settings section below. If other browsers have difficulties (don't -# recognize the schemes offered even if you are using basic) either -# put basic first, or disable the other schemes (by commenting out their -# program entry). -# -# Once an authentication scheme is fully configured, it can only be -# shutdown by shutting squid down and restarting. Changes can be made on -# the fly and activated with a reconfigure. I.E. You can change to a -# different helper, but not unconfigure the helper completely. -# -# Please note that while this directive defines how Squid processes -# authentication it does not automatically activate authentication. -# To use authentication you must in addition make use of ACLs based -# on login name in http_access (proxy_auth, proxy_auth_regex or -# external with %LOGIN used in the format tag). The browser will be -# challenged for authentication on the first such acl encountered -# in http_access processing and will also be re-challenged for new -# login credentials if the request is being denied by a proxy_auth -# type acl. -# -# WARNING: authentication can't be used in a transparently intercepting -# proxy as the client then thinks it is talking to an origin server and -# not the proxy. This is a limitation of bending the TCP/IP protocol to -# transparently intercepting port 80, not a limitation in Squid. -# Ports flagged 'transparent', 'intercept', or 'tproxy' have -# authentication disabled. -# -# === Parameters for the basic scheme follow. === -# -# "program" cmdline -# Specify the command for the external authenticator. Such a program -# reads a line containing "username password" and replies "OK" or -# "ERR" in an endless loop. "ERR" responses may optionally be followed -# by a error description available as %m in the returned error page. -# If you use an authenticator, make sure you have 1 acl of type -# proxy_auth. -# -# By default, the basic authentication scheme is not used unless a -# program is specified. -# -# If you want to use the traditional NCSA proxy authentication, set -# this line to something like -# -# auth_param basic program /usr/lib/squid3/ncsa_auth /usr/etc/passwd -# -# "utf8" on|off -# HTTP uses iso-latin-1 as characterset, while some authentication -# backends such as LDAP expects UTF-8. If this is set to on Squid will -# translate the HTTP iso-latin-1 charset to UTF-8 before sending the -# username & password to the helper. -# -# "children" numberofchildren -# The number of authenticator processes to spawn. If you start too few -# Squid will have to wait for them to process a backlog of credential -# verifications, slowing it down. When password verifications are -# done via a (slow) network you are likely to need lots of -# authenticator processes. -# auth_param basic children 5 -# -# "concurrency" concurrency -# The number of concurrent requests the helper can process. -# The default of 0 is used for helpers who only supports -# one request at a time. Setting this changes the protocol used to -# include a channel number first on the request/response line, allowing -# multiple requests to be sent to the same helper in parallell without -# wating for the response. -# Must not be set unless it's known the helper supports this. -# auth_param basic concurrency 0 -# -# "realm" realmstring -# Specifies the realm name which is to be reported to the -# client for the basic proxy authentication scheme (part of -# the text the user will see when prompted their username and -# password). There is no default. -# auth_param basic realm Squid proxy-caching web server -# -# "credentialsttl" timetolive -# Specifies how long squid assumes an externally validated -# username:password pair is valid for - in other words how -# often the helper program is called for that user. Set this -# low to force revalidation with short lived passwords. Note -# setting this high does not impact your susceptibility -# to replay attacks unless you are using an one-time password -# system (such as SecureID). If you are using such a system, -# you will be vulnerable to replay attacks unless you also -# use the max_user_ip ACL in an http_access rule. -# -# "casesensitive" on|off -# Specifies if usernames are case sensitive. Most user databases are -# case insensitive allowing the same username to be spelled using both -# lower and upper case letters, but some are case sensitive. This -# makes a big difference for user_max_ip ACL processing and similar. -# auth_param basic casesensitive off -# -# === Parameters for the digest scheme follow === -# -# "program" cmdline -# Specify the command for the external authenticator. Such -# a program reads a line containing "username":"realm" and -# replies with the appropriate H(A1) value hex encoded or -# ERR if the user (or his H(A1) hash) does not exists. -# See rfc 2616 for the definition of H(A1). -# "ERR" responses may optionally be followed by a error description -# available as %m in the returned error page. -# -# By default, the digest authentication scheme is not used unless a -# program is specified. -# -# If you want to use a digest authenticator, set this line to -# something like -# -# auth_param digest program /usr/lib/squid3/digest_pw_auth /usr/etc/digpass -# -# "utf8" on|off -# HTTP uses iso-latin-1 as characterset, while some authentication -# backends such as LDAP expects UTF-8. If this is set to on Squid will -# translate the HTTP iso-latin-1 charset to UTF-8 before sending the -# username & password to the helper. -# -# "children" numberofchildren -# The number of authenticator processes to spawn (no default). -# If you start too few Squid will have to wait for them to -# process a backlog of H(A1) calculations, slowing it down. -# When the H(A1) calculations are done via a (slow) network -# you are likely to need lots of authenticator processes. -# auth_param digest children 5 -# -# "realm" realmstring -# Specifies the realm name which is to be reported to the -# client for the digest proxy authentication scheme (part of -# the text the user will see when prompted their username and -# password). There is no default. -# auth_param digest realm Squid proxy-caching web server -# -# "nonce_garbage_interval" timeinterval -# Specifies the interval that nonces that have been issued -# to client_agent's are checked for validity. -# -# "nonce_max_duration" timeinterval -# Specifies the maximum length of time a given nonce will be -# valid for. -# -# "nonce_max_count" number -# Specifies the maximum number of times a given nonce can be -# used. -# -# "nonce_strictness" on|off -# Determines if squid requires strict increment-by-1 behavior -# for nonce counts, or just incrementing (off - for use when -# useragents generate nonce counts that occasionally miss 1 -# (ie, 1,2,4,6)). Default off. -# -# "check_nonce_count" on|off -# This directive if set to off can disable the nonce count check -# completely to work around buggy digest qop implementations in -# certain mainstream browser versions. Default on to check the -# nonce count to protect from authentication replay attacks. -# -# "post_workaround" on|off -# This is a workaround to certain buggy browsers who sends -# an incorrect request digest in POST requests when reusing -# the same nonce as acquired earlier on a GET request. -# -# === NTLM scheme options follow === -# -# "program" cmdline -# Specify the command for the external NTLM authenticator. -# Such a program reads exchanged NTLMSSP packets with -# the browser via Squid until authentication is completed. -# If you use an NTLM authenticator, make sure you have 1 acl -# of type proxy_auth. By default, the NTLM authenticator_program -# is not used. -# -# auth_param ntlm program /usr/lib/squid3/ntlm_auth -# -# "children" numberofchildren -# The number of authenticator processes to spawn (no default). -# If you start too few Squid will have to wait for them to -# process a backlog of credential verifications, slowing it -# down. When credential verifications are done via a (slow) -# network you are likely to need lots of authenticator -# processes. -# -# auth_param ntlm children 5 -# -# "keep_alive" on|off -# Whether to keep the connection open after the initial response where -# Squid tells the browser which schemes are supported by the proxy. -# Some browsers are known to present many login popups or to corrupt -# POST/PUT requests transfer if the connection is not closed. -# The default is currently OFF to avoid this, but may change. -# -# auth_param ntlm keep_alive on -# -# === Options for configuring the NEGOTIATE auth-scheme follow === -# -# "program" cmdline -# Specify the command for the external Negotiate authenticator. -# This protocol is used in Microsoft Active-Directory enabled setups with -# the Microsoft Internet Explorer or Mozilla Firefox browsers. -# Its main purpose is to exchange credentials with the Squid proxy -# using the Kerberos mechanisms. -# If you use a Negotiate authenticator, make sure you have at least -# one acl of type proxy_auth active. By default, the negotiate -# authenticator_program is not used. -# The only supported program for this role is the ntlm_auth -# program distributed as part of Samba, version 4 or later. -# -# auth_param negotiate program /usr/lib/squid3/ntlm_auth --helper-protocol=gss-spnego -# -# "children" numberofchildren -# The number of authenticator processes to spawn (no default). -# If you start too few Squid will have to wait for them to -# process a backlog of credential verifications, slowing it -# down. When crendential verifications are done via a (slow) -# network you are likely to need lots of authenticator -# processes. -# auth_param negotiate children 5 -# -# "keep_alive" on|off -# Whether to keep the connection open after the initial response where -# Squid tells the browser which schemes are supported by the proxy. -# Some browsers are known to present many login popups or to corrupt -# POST/PUT requests transfer if the connection is not closed. -# The default is currently OFF to avoid this, but may change. -# -# auth_param negotiate keep_alive on -# -# -# Examples: -# -##Recommended minimum configuration per scheme: -##auth_param negotiate program -##auth_param negotiate children 5 -##auth_param negotiate keep_alive on -## -##auth_param ntlm program -##auth_param ntlm children 5 -##auth_param ntlm keep_alive on -## -##auth_param digest program -##auth_param digest children 5 -##auth_param digest realm Squid proxy-caching web server -##auth_param digest nonce_garbage_interval 5 minutes -##auth_param digest nonce_max_duration 30 minutes -##auth_param digest nonce_max_count 50 -## -##auth_param basic program -##auth_param basic children 5 -##auth_param basic realm Squid proxy-caching web server -##auth_param basic credentialsttl 2 hours -#Default: -# none - -# TAG: authenticate_cache_garbage_interval -# The time period between garbage collection across the username cache. -# This is a tradeoff between memory utilization (long intervals - say -# 2 days) and CPU (short intervals - say 1 minute). Only change if you -# have good reason to. -#Default: -# authenticate_cache_garbage_interval 1 hour - -# TAG: authenticate_ttl -# The time a user & their credentials stay in the logged in -# user cache since their last request. When the garbage -# interval passes, all user credentials that have passed their -# TTL are removed from memory. -#Default: -# authenticate_ttl 1 hour - -# TAG: authenticate_ip_ttl -# If you use proxy authentication and the 'max_user_ip' ACL, -# this directive controls how long Squid remembers the IP -# addresses associated with each user. Use a small value -# (e.g., 60 seconds) if your users might change addresses -# quickly, as is the case with dialups. You might be safe -# using a larger value (e.g., 2 hours) in a corporate LAN -# environment with relatively static address assignments. -#Default: -# authenticate_ip_ttl 0 seconds - -# ACCESS CONTROLS -# ----------------------------------------------------------------------------- - -# TAG: external_acl_type -# This option defines external acl classes using a helper program -# to look up the status -# -# external_acl_type name [options] FORMAT.. /path/to/helper [helper arguments..] -# -# Options: -# -# ttl=n TTL in seconds for cached results (defaults to 3600 -# for 1 hour) -# negative_ttl=n -# TTL for cached negative lookups (default same -# as ttl) -# children=n Number of acl helper processes spawn to service -# external acl lookups of this type. (default 5) -# concurrency=n concurrency level per process. Only used with helpers -# capable of processing more than one query at a time. -# cache=n result cache size, 0 is unbounded (default) -# grace=n Percentage remaining of TTL where a refresh of a -# cached entry should be initiated without needing to -# wait for a new reply. (default 0 for no grace period) -# protocol=2.5 Compatibility mode for Squid-2.5 external acl helpers -# ipv4 / ipv6 IP protocol used to communicate with this helper. -# The default is to auto-detect IPv6 and use it when available. -# -# FORMAT specifications -# -# %LOGIN Authenticated user login name -# %EXT_USER Username from external acl -# %IDENT Ident user name -# %SRC Client IP -# %SRCPORT Client source port -# %URI Requested URI -# %DST Requested host -# %PROTO Requested protocol -# %PORT Requested port -# %PATH Requested URL path -# %METHOD Request method -# %MYADDR Squid interface address -# %MYPORT Squid http_port number -# %PATH Requested URL-path (including query-string if any) -# %USER_CERT SSL User certificate in PEM format -# %USER_CERTCHAIN SSL User certificate chain in PEM format -# %USER_CERT_xx SSL User certificate subject attribute xx -# %USER_CA_xx SSL User certificate issuer attribute xx -# -# %>{Header} HTTP request header "Header" -# %>{Hdr:member} -# HTTP request header "Hdr" list member "member" -# %>{Hdr:;member} -# HTTP request header list member using ; as -# list separator. ; can be any non-alphanumeric -# character. -# -# %<{Header} HTTP reply header "Header" -# %<{Hdr:member} -# HTTP reply header "Hdr" list member "member" -# %<{Hdr:;member} -# HTTP reply header list member using ; as -# list separator. ; can be any non-alphanumeric -# character. -# -# %% The percent sign. Useful for helpers which need -# an unchanging input format. -# -# In addition to the above, any string specified in the referencing -# acl will also be included in the helper request line, after the -# specified formats (see the "acl external" directive) -# -# The helper receives lines per the above format specification, -# and returns lines starting with OK or ERR indicating the validity -# of the request and optionally followed by additional keywords with -# more details. -# -# General result syntax: -# -# OK/ERR keyword=value ... -# -# Defined keywords: -# -# user= The users name (login) -# password= The users password (for login= cache_peer option) -# message= Message describing the reason. Available as %o -# in error pages -# tag= Apply a tag to a request (for both ERR and OK results) -# Only sets a tag, does not alter existing tags. -# log= String to be logged in access.log. Available as -# %ea in logformat specifications -# -# If protocol=3.0 (the default) then URL escaping is used to protect -# each value in both requests and responses. -# -# If using protocol=2.5 then all values need to be enclosed in quotes -# if they may contain whitespace, or the whitespace escaped using \. -# And quotes or \ characters within the keyword value must be \ escaped. -# -# When using the concurrency= option the protocol is changed by -# introducing a query channel tag infront of the request/response. -# The query channel tag is a number between 0 and concurrency-1. -#Default: -# none - -# TAG: acl -# Defining an Access List -# -# Every access list definition must begin with an aclname and acltype, -# followed by either type-specific arguments or a quoted filename that -# they are read from. -# -# acl aclname acltype argument ... -# acl aclname acltype "file" ... -# -# When using "file", the file should contain one item per line. -# -# By default, regular expressions are CASE-SENSITIVE. -# To make them case-insensitive, use the -i option. To return case-sensitive -# use the +i option between patterns, or make a new ACL line without -i. -# -# Some acl types require suspending the current request in order -# to access some external data source. -# Those which do are marked with the tag [slow], those which -# don't are marked as [fast]. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl -# for further information -# -# ***** ACL TYPES AVAILABLE ***** -# -# acl aclname src ip-address/netmask ... # clients IP address [fast] -# acl aclname src addr1-addr2/netmask ... # range of addresses [fast] -# acl aclname dst ip-address/netmask ... # URL host's IP address [slow] -# acl aclname myip ip-address/netmask ... # local socket IP address [fast] -# -# acl aclname arp mac-address ... (xx:xx:xx:xx:xx:xx notation) -# # The arp ACL requires the special configure option --enable-arp-acl. -# # Furthermore, the ARP ACL code is not portable to all operating systems. -# # It works on Linux, Solaris, Windows, FreeBSD, and some -# # other *BSD variants. -# # [fast] -# # -# # NOTE: Squid can only determine the MAC address for clients that are on -# # the same subnet. If the client is on a different subnet, -# # then Squid cannot find out its MAC address. -# -# acl aclname srcdomain .foo.com ... -# # reverse lookup, from client IP [slow] -# acl aclname dstdomain .foo.com ... -# # Destination server from URL [fast] -# acl aclname srcdom_regex [-i] \.foo\.com ... -# # regex matching client name [slow] -# acl aclname dstdom_regex [-i] \.foo\.com ... -# # regex matching server [fast] -# # -# # For dstdomain and dstdom_regex a reverse lookup is tried if a IP -# # based URL is used and no match is found. The name "none" is used -# # if the reverse lookup fails. -# -# acl aclname src_as number ... -# acl aclname dst_as number ... -# # [fast] -# # Except for access control, AS numbers can be used for -# # routing of requests to specific caches. Here's an -# # example for routing all requests for AS#1241 and only -# # those to mycache.mydomain.net: -# # acl asexample dst_as 1241 -# # cache_peer_access mycache.mydomain.net allow asexample -# # cache_peer_access mycache_mydomain.net deny all -# -# acl aclname peername myPeer ... -# # [fast] -# # match against a named cache_peer entry -# # set unique name= on cache_peer lines for reliable use. -# -# acl aclname time [day-abbrevs] [h1:m1-h2:m2] -# # [fast] -# # day-abbrevs: -# # S - Sunday -# # M - Monday -# # T - Tuesday -# # W - Wednesday -# # H - Thursday -# # F - Friday -# # A - Saturday -# # h1:m1 must be less than h2:m2 -# -# acl aclname url_regex [-i] ^http:// ... -# # regex matching on whole URL [fast] -# acl aclname urlpath_regex [-i] \.gif$ ... -# # regex matching on URL path [fast] -# -# acl aclname port 80 70 21 0-1024... # destination TCP port [fast] -# # ranges are alloed -# acl aclname myport 3128 ... # local socket TCP port [fast] -# acl aclname myportname 3128 ... # http(s)_port name [fast] -# -# acl aclname proto HTTP FTP ... # request protocol [fast] -# -# acl aclname method GET POST ... # HTTP request method [fast] -# -# acl aclname http_status 200 301 500- 400-403 ... -# # status code in reply [fast] -# -# acl aclname browser [-i] regexp ... -# # pattern match on User-Agent header (see also req_header below) [fast] -# -# acl aclname referer_regex [-i] regexp ... -# # pattern match on Referer header [fast] -# # Referer is highly unreliable, so use with care -# -# acl aclname ident username ... -# acl aclname ident_regex [-i] pattern ... -# # string match on ident output [slow] -# # use REQUIRED to accept any non-null ident. -# -# acl aclname proxy_auth [-i] username ... -# acl aclname proxy_auth_regex [-i] pattern ... -# # perform http authentication challenge to the client and match against -# # supplied credentials [slow] -# # -# # takes a list of allowed usernames. -# # use REQUIRED to accept any valid username. -# # -# # Will use proxy authentication in forward-proxy scenarios, and plain -# # http authenticaiton in reverse-proxy scenarios -# # -# # NOTE: when a Proxy-Authentication header is sent but it is not -# # needed during ACL checking the username is NOT logged -# # in access.log. -# # -# # NOTE: proxy_auth requires a EXTERNAL authentication program -# # to check username/password combinations (see -# # auth_param directive). -# # -# # NOTE: proxy_auth can't be used in a transparent/intercepting proxy -# # as the browser needs to be configured for using a proxy in order -# # to respond to proxy authentication. -# -# acl aclname snmp_community string ... -# # A community string to limit access to your SNMP Agent [fast] -# # Example: -# # -# # acl snmppublic snmp_community public -# -# acl aclname maxconn number -# # This will be matched when the client's IP address has -# # more than TCP connections established. [fast] -# # NOTE: This only measures direct TCP links so X-Forwarded-For -# # indirect clients are not counted. -# -# acl aclname max_user_ip [-s] number -# # This will be matched when the user attempts to log in from more -# # than different ip addresses. The authenticate_ip_ttl -# # parameter controls the timeout on the ip entries. [fast] -# # If -s is specified the limit is strict, denying browsing -# # from any further IP addresses until the ttl has expired. Without -# # -s Squid will just annoy the user by "randomly" denying requests. -# # (the counter is reset each time the limit is reached and a -# # request is denied) -# # NOTE: in acceleration mode or where there is mesh of child proxies, -# # clients may appear to come from multiple addresses if they are -# # going through proxy farms, so a limit of 1 may cause user problems. -# -# acl aclname req_mime_type [-i] mime-type ... -# # regex match against the mime type of the request generated -# # by the client. Can be used to detect file upload or some -# # types HTTP tunneling requests [fast] -# # NOTE: This does NOT match the reply. You cannot use this -# # to match the returned file type. -# -# acl aclname req_header header-name [-i] any\.regex\.here -# # regex match against any of the known request headers. May be -# # thought of as a superset of "browser", "referer" and "mime-type" -# # ACL [fast] -# -# acl aclname rep_mime_type [-i] mime-type ... -# # regex match against the mime type of the reply received by -# # squid. Can be used to detect file download or some -# # types HTTP tunneling requests. [fast] -# # NOTE: This has no effect in http_access rules. It only has -# # effect in rules that affect the reply data stream such as -# # http_reply_access. -# -# acl aclname rep_header header-name [-i] any\.regex\.here -# # regex match against any of the known reply headers. May be -# # thought of as a superset of "browser", "referer" and "mime-type" -# # ACLs [fast] -# -# acl aclname external class_name [arguments...] -# # external ACL lookup via a helper class defined by the -# # external_acl_type directive [slow] -# -# acl aclname user_cert attribute values... -# # match against attributes in a user SSL certificate -# # attribute is one of DN/C/O/CN/L/ST [fast] -# -# acl aclname ca_cert attribute values... -# # match against attributes a users issuing CA SSL certificate -# # attribute is one of DN/C/O/CN/L/ST [fast] -# -# acl aclname ext_user username ... -# acl aclname ext_user_regex [-i] pattern ... -# # string match on username returned by external acl helper [slow] -# # use REQUIRED to accept any non-null user name. -# -# acl aclname tag tagvalue ... -# # string match on tag returned by external acl helper [slow] -# -# Examples: -# acl macaddress arp 09:00:2b:23:45:67 -# acl myexample dst_as 1241 -# acl password proxy_auth REQUIRED -# acl fileupload req_mime_type -i ^multipart/form-data$ -# acl javascript rep_mime_type -i ^application/x-javascript$ -# -#Default: -# acl all src all -# -# -# Recommended minimum configuration: -# (now built-in) -#acl manager proto cache_object -#acl localhost src 127.0.0.1/32 ::1 -#acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 - -# Example rule allowing access from your local networks. -# Adapt to list your (internal) IP networks from where browsing -# should be allowed -#acl localnet src 10.0.0.0/8 # RFC1918 possible internal network -#acl localnet src 172.16.0.0/12 # RFC1918 possible internal network -#acl localnet src 192.168.0.0/16 # RFC1918 possible internal network -#acl localnet src fc00::/7 # RFC 4193 local private network range -#acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines - -acl SSL_ports port 443 -acl Safe_ports port 80 # http -acl Safe_ports port 21 # ftp -acl Safe_ports port 443 # https -acl Safe_ports port 70 # gopher -acl Safe_ports port 210 # wais -acl Safe_ports port 1025-65535 # unregistered ports -acl Safe_ports port 280 # http-mgmt -acl Safe_ports port 488 # gss-http -acl Safe_ports port 591 # filemaker -acl Safe_ports port 777 # multiling http -acl CONNECT method CONNECT - -# TAG: follow_x_forwarded_for -# Allowing or Denying the X-Forwarded-For header to be followed to -# find the original source of a request. -# -# Requests may pass through a chain of several other proxies -# before reaching us. The X-Forwarded-For header will contain a -# comma-separated list of the IP addresses in the chain, with the -# rightmost address being the most recent. -# -# If a request reaches us from a source that is allowed by this -# configuration item, then we consult the X-Forwarded-For header -# to see where that host received the request from. If the -# X-Forwarded-For header contains multiple addresses, we continue -# backtracking until we reach an address for which we are not allowed -# to follow the X-Forwarded-For header, or until we reach the first -# address in the list. For the purpose of ACL used in the -# follow_x_forwarded_for directive the src ACL type always matches -# the address we are testing and srcdomain matches its rDNS. -# -# The end result of this process is an IP address that we will -# refer to as the indirect client address. This address may -# be treated as the client address for access control, ICAP, delay -# pools and logging, depending on the acl_uses_indirect_client, -# icap_uses_indirect_client, delay_pool_uses_indirect_client and -# log_uses_indirect_client options. -# -# This clause only supports fast acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -# -# SECURITY CONSIDERATIONS: -# -# Any host for which we follow the X-Forwarded-For header -# can place incorrect information in the header, and Squid -# will use the incorrect information as if it were the -# source address of the request. This may enable remote -# hosts to bypass any access control restrictions that are -# based on the client's source addresses. -# -# For example: -# -# acl localhost src 127.0.0.1 -# acl my_other_proxy srcdomain .proxy.example.com -# follow_x_forwarded_for allow localhost -# follow_x_forwarded_for allow my_other_proxy -#Default: -# follow_x_forwarded_for deny all - -# TAG: acl_uses_indirect_client on|off -# Controls whether the indirect client address -# (see follow_x_forwarded_for) is used instead of the -# direct client address in acl matching. -# -# NOTE: maxconn ACL considers direct TCP links and indirect -# clients will always have zero. So no match. -#Default: -# acl_uses_indirect_client on - -# TAG: delay_pool_uses_indirect_client on|off -# Controls whether the indirect client address -# (see follow_x_forwarded_for) is used instead of the -# direct client address in delay pools. -#Default: -# delay_pool_uses_indirect_client on - -# TAG: log_uses_indirect_client on|off -# Controls whether the indirect client address -# (see follow_x_forwarded_for) is used instead of the -# direct client address in the access log. -#Default: -# log_uses_indirect_client on - -# TAG: http_access -# Allowing or Denying access based on defined access lists -# -# Access to the HTTP port: -# http_access allow|deny [!]aclname ... -# -# NOTE on default values: -# -# If there are no "access" lines present, the default is to deny -# the request. -# -# If none of the "access" lines cause a match, the default is the -# opposite of the last line in the list. If the last line was -# deny, the default is allow. Conversely, if the last line -# is allow, the default will be deny. For these reasons, it is a -# good idea to have an "deny all" entry at the end of your access -# lists to avoid potential confusion. -# -# This clause supports both fast and slow acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -# -#Default: -# http_access deny all -# - -# -# Recommended minimum Access Permission configuration: -# -# Only allow cachemgr access from localhost -http_access allow manager localhost -http_access deny manager - -# Deny requests to certain unsafe ports -http_access deny !Safe_ports - -# Deny CONNECT to other than secure SSL ports -http_access deny CONNECT !SSL_ports - -# We strongly recommend the following be uncommented to protect innocent -# web applications running on the proxy server who think the only -# one who can access services on "localhost" is a local user -#http_access deny to_localhost - -# -# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS -# - -# Example rule allowing access from your local networks. -# Adapt localnet in the ACL section to list your (internal) IP networks -# from where browsing should be allowed -#http_access allow localnet -http_access allow localhost - -# And finally deny all other access to this proxy -http_access deny all - -# TAG: adapted_http_access -# Allowing or Denying access based on defined access lists -# -# Essentially identical to http_access, but runs after redirectors -# and ICAP/eCAP adaptation. Allowing access control based on their -# output. -# -# If not set then only http_access is used. -#Default: -# none - -# TAG: http_reply_access -# Allow replies to client requests. This is complementary to http_access. -# -# http_reply_access allow|deny [!] aclname ... -# -# NOTE: if there are no access lines present, the default is to allow -# all replies -# -# If none of the access lines cause a match the opposite of the -# last line will apply. Thus it is good practice to end the rules -# with an "allow all" or "deny all" entry. -# -# This clause supports both fast and slow acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -#Default: -# none - -# TAG: icp_access -# Allowing or Denying access to the ICP port based on defined -# access lists -# -# icp_access allow|deny [!]aclname ... -# -# See http_access for details -# -# This clause only supports fast acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -# -## Allow ICP queries from local networks only -##icp_access allow localnet -##icp_access deny all -#Default: -# icp_access deny all - -# TAG: htcp_access -# Allowing or Denying access to the HTCP port based on defined -# access lists -# -# htcp_access allow|deny [!]aclname ... -# -# See http_access for details -# -# NOTE: The default if no htcp_access lines are present is to -# deny all traffic. This default may cause problems with peers -# using the htcp or htcp-oldsquid options. -# -# This clause only supports fast acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -# -## Allow HTCP queries from local networks only -##htcp_access allow localnet -##htcp_access deny all -#Default: -# htcp_access deny all - -# TAG: htcp_clr_access -# Allowing or Denying access to purge content using HTCP based -# on defined access lists -# -# htcp_clr_access allow|deny [!]aclname ... -# -# See http_access for details -# -# This clause only supports fast acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -# -## Allow HTCP CLR requests from trusted peers -#acl htcp_clr_peer src 172.16.1.2 -#htcp_clr_access allow htcp_clr_peer -#Default: -# htcp_clr_access deny all - -# TAG: miss_access -# Determins whether network access is permitted when satisfying a request. -# -# For example; -# to force your neighbors to use you as a sibling instead of -# a parent. -# -# acl localclients src 172.16.0.0/16 -# miss_access allow localclients -# miss_access deny !localclients -# -# This means only your local clients are allowed to fetch relayed/MISS -# replies from the network and all other clients can only fetch cached -# objects (HITs). -# -# -# The default for this setting allows all clients who passed the -# http_access rules to relay via this proxy. -# -# This clause only supports fast acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -#Default: -# miss_access allow all - -# TAG: ident_lookup_access -# A list of ACL elements which, if matched, cause an ident -# (RFC 931) lookup to be performed for this request. For -# example, you might choose to always perform ident lookups -# for your main multi-user Unix boxes, but not for your Macs -# and PCs. By default, ident lookups are not performed for -# any requests. -# -# To enable ident lookups for specific client addresses, you -# can follow this example: -# -# acl ident_aware_hosts src 198.168.1.0/24 -# ident_lookup_access allow ident_aware_hosts -# ident_lookup_access deny all -# -# Only src type ACL checks are fully supported. A srcdomain -# ACL might work at times, but it will not always provide -# the correct result. -# -# This clause only supports fast acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -#Default: -# ident_lookup_access deny all - -# TAG: reply_body_max_size size [acl acl...] -# This option specifies the maximum size of a reply body. It can be -# used to prevent users from downloading very large files, such as -# MP3's and movies. When the reply headers are received, the -# reply_body_max_size lines are processed, and the first line where -# all (if any) listed ACLs are true is used as the maximum body size -# for this reply. -# -# This size is checked twice. First when we get the reply headers, -# we check the content-length value. If the content length value exists -# and is larger than the allowed size, the request is denied and the -# user receives an error message that says "the request or reply -# is too large." If there is no content-length, and the reply -# size exceeds this limit, the client's connection is just closed -# and they will receive a partial reply. -# -# WARNING: downstream caches probably can not detect a partial reply -# if there is no content-length header, so they will cache -# partial responses and give them out as hits. You should NOT -# use this option if you have downstream caches. -# -# WARNING: A maximum size smaller than the size of squid's error messages -# will cause an infinite loop and crash squid. Ensure that the smallest -# non-zero value you use is greater that the maximum header size plus -# the size of your largest error page. -# -# If you set this parameter none (the default), there will be -# no limit imposed. -# -# Configuration Format is: -# reply_body_max_size SIZE UNITS [acl ...] -# ie. -# reply_body_max_size 10 MB -# -#Default: -# none - -# NETWORK OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: http_port -# Usage: port [options] -# hostname:port [options] -# 1.2.3.4:port [options] -# -# The socket addresses where Squid will listen for HTTP client -# requests. You may specify multiple socket addresses. -# There are three forms: port alone, hostname with port, and -# IP address with port. If you specify a hostname or IP -# address, Squid binds the socket to that specific -# address. This replaces the old 'tcp_incoming_address' -# option. Most likely, you do not need to bind to a specific -# address, so you can use the port number alone. -# -# If you are running Squid in accelerator mode, you -# probably want to listen on port 80 also, or instead. -# -# The -a command line option may be used to specify additional -# port(s) where Squid listens for proxy request. Such ports will -# be plain proxy ports with no options. -# -# You may specify multiple socket addresses on multiple lines. -# -# Options: -# -# intercept Support for IP-Layer interception of -# outgoing requests without browser settings. -# NP: disables authentication and IPv6 on the port. -# -# tproxy Support Linux TPROXY for spoofing outgoing -# connections using the client IP address. -# NP: disables authentication and maybe IPv6 on the port. -# -# accel Accelerator mode. Also needs at least one of -# vhost / vport / defaultsite. -# -# allow-direct Allow direct forwarding in accelerator mode. Normally -# accelerated requests are denied direct forwarding as if -# never_direct was used. -# -# defaultsite=domainname -# What to use for the Host: header if it is not present -# in a request. Determines what site (not origin server) -# accelerators should consider the default. -# Implies accel. -# -# vhost Accelerator mode using Host header for virtual domain support. -# Also uses the port as specified in Host: header unless -# overridden by the vport option. Implies accel. -# -# vport Virtual host port support. Using the http_port number -# instead of the port passed on Host: headers. Implies accel. -# -# vport=NN Virtual host port support. Using the specified port -# number instead of the port passed on Host: headers. -# Implies accel. -# -# protocol= Protocol to reconstruct accelerated requests with. -# Defaults to http. -# -# ignore-cc Ignore request Cache-Control headers. -# -# Warning: This option violates HTTP specifications if -# used in non-accelerator setups. -# -# connection-auth[=on|off] -# use connection-auth=off to tell Squid to prevent -# forwarding Microsoft connection oriented authentication -# (NTLM, Negotiate and Kerberos) -# -# disable-pmtu-discovery= -# Control Path-MTU discovery usage: -# off lets OS decide on what to do (default). -# transparent disable PMTU discovery when transparent -# support is enabled. -# always disable always PMTU discovery. -# -# In many setups of transparently intercepting proxies -# Path-MTU discovery can not work on traffic towards the -# clients. This is the case when the intercepting device -# does not fully track connections and fails to forward -# ICMP must fragment messages to the cache server. If you -# have such setup and experience that certain clients -# sporadically hang or never complete requests set -# disable-pmtu-discovery option to 'transparent'. -# -# ssl-bump Intercept each CONNECT request matching ssl_bump ACL, -# establish secure connection with the client and with -# the server, decrypt HTTP messages as they pass through -# Squid, and treat them as unencrypted HTTP messages, -# becoming the man-in-the-middle. -# -# When this option is enabled, additional options become -# available to specify SSL-related properties of the -# client-side connection: cert, key, version, cipher, -# options, clientca, cafile, capath, crlfile, dhparams, -# sslflags, and sslcontext. See the https_port directive -# for more information on these options. -# -# The ssl_bump option is required to fully enable -# the SslBump feature. -# -# name= Specifies a internal name for the port. Defaults to -# the port specification (port or addr:port) -# -# tcpkeepalive[=idle,interval,timeout] -# Enable TCP keepalive probes of idle connections. -# In seconds; idle is the initial time before TCP starts -# probing the connection, interval how often to probe, and -# timeout the time before giving up. -# -# If you run Squid on a dual-homed machine with an internal -# and an external interface we recommend you to specify the -# internal address:port in http_port. This way Squid will only be -# visible on the internal address. -# -# - -# Squid normally listens to port 3128 -http_port 3128 - -# TAG: https_port -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# Usage: [ip:]port cert=certificate.pem [key=key.pem] [options...] -# -# The socket address where Squid will listen for HTTPS client -# requests. -# -# This is really only useful for situations where you are running -# squid in accelerator mode and you want to do the SSL work at the -# accelerator level. -# -# You may specify multiple socket addresses on multiple lines, -# each with their own SSL certificate and/or options. -# -# Options: -# -# accel Accelerator mode. Also needs at least one of -# defaultsite or vhost. -# -# defaultsite= The name of the https site presented on -# this port. Implies accel. -# -# vhost Accelerator mode using Host header for virtual -# domain support. Requires a wildcard certificate -# or other certificate valid for more than one domain. -# Implies accel. -# -# protocol= Protocol to reconstruct accelerated requests with. -# Defaults to https. -# -# cert= Path to SSL certificate (PEM format). -# -# key= Path to SSL private key file (PEM format) -# if not specified, the certificate file is -# assumed to be a combined certificate and -# key file. -# -# version= The version of SSL/TLS supported -# 1 automatic (default) -# 2 SSLv2 only -# 3 SSLv3 only -# 4 TLSv1 only -# -# cipher= Colon separated list of supported ciphers. -# NOTE: some ciphers such as EDH ciphers depend on -# additional settings. If those settings are -# omitted the ciphers may be silently ignored -# by the OpenSSL library. -# -# options= Various SSL engine options. The most important -# being: -# NO_SSLv2 Disallow the use of SSLv2 -# NO_SSLv3 Disallow the use of SSLv3 -# NO_TLSv1 Disallow the use of TLSv1 -# SINGLE_DH_USE Always create a new key when using -# temporary/ephemeral DH key exchanges -# See OpenSSL SSL_CTX_set_options documentation for a -# complete list of options. -# -# clientca= File containing the list of CAs to use when -# requesting a client certificate. -# -# cafile= File containing additional CA certificates to -# use when verifying client certificates. If unset -# clientca will be used. -# -# capath= Directory containing additional CA certificates -# and CRL lists to use when verifying client certificates. -# -# crlfile= File of additional CRL lists to use when verifying -# the client certificate, in addition to CRLs stored in -# the capath. Implies VERIFY_CRL flag below. -# -# dhparams= File containing DH parameters for temporary/ephemeral -# DH key exchanges. See OpenSSL documentation for details -# on how to create this file. -# WARNING: EDH ciphers will be silently disabled if this -# option is not set. -# -# sslflags= Various flags modifying the use of SSL: -# DELAYED_AUTH -# Don't request client certificates -# immediately, but wait until acl processing -# requires a certificate (not yet implemented). -# NO_DEFAULT_CA -# Don't use the default CA lists built in -# to OpenSSL. -# NO_SESSION_REUSE -# Don't allow for session reuse. Each connection -# will result in a new SSL session. -# VERIFY_CRL -# Verify CRL lists when accepting client -# certificates. -# VERIFY_CRL_ALL -# Verify CRL lists for all certificates in the -# client certificate chain. -# -# sslcontext= SSL session ID context identifier. -# -# generate-host-certificates[=] -# Dynamically create SSL server certificates for the -# destination hosts of bumped CONNECT requests.When -# enabled, the cert and key options are used to sign -# generated certificates. Otherwise generated -# certificate will be selfsigned. -# If there is CA certificate life time of generated -# certificate equals lifetime of CA certificate. If -# generated certificate is selfsigned lifetime is three -# years. -# This option is enabled by default when SslBump is used. -# See the sslBump option above for more information. -# -# dynamic_cert_mem_cache_size=SIZE -# Approximate total RAM size spent on cached generated -# certificates. If set to zero, caching is disabled. The -# default value is 4MB. An average XXX-bit certificate -# consumes about XXX bytes of RAM. -# -# vport Accelerator with IP based virtual host support. -# -# vport=NN As above, but uses specified port number rather -# than the https_port number. Implies accel. -# -# name= Specifies a internal name for the port. Defaults to -# the port specification (port or addr:port) -# -#Default: -# none - -# TAG: tcp_outgoing_tos -# Allows you to select a TOS/Diffserv value to mark outgoing -# connections with, based on the username or source address -# making the request. -# -# tcp_outgoing_tos ds-field [!]aclname ... -# -# Example where normal_service_net uses the TOS value 0x00 -# and good_service_net uses 0x20 -# -# acl normal_service_net src 10.0.0.0/24 -# acl good_service_net src 10.0.1.0/24 -# tcp_outgoing_tos 0x00 normal_service_net -# tcp_outgoing_tos 0x20 good_service_net -# -# TOS/DSCP values really only have local significance - so you should -# know what you're specifying. For more information, see RFC2474, -# RFC2475, and RFC3260. -# -# The TOS/DSCP byte must be exactly that - a octet value 0 - 255, or -# "default" to use whatever default your host has. Note that in -# practice often only multiples of 4 is usable as the two rightmost bits -# have been redefined for use by ECN (RFC 3168 section 23.1). -# -# Processing proceeds in the order specified, and stops at first fully -# matching line. -# -# Note: The use of this directive using client dependent ACLs is -# incompatible with the use of server side persistent connections. To -# ensure correct results it is best to set server_persistent_connections -# to off when using this directive in such configurations. -#Default: -# none - -# TAG: clientside_tos -# Allows you to select a TOS/Diffserv value to mark client-side -# connections with, based on the username or source address -# making the request. -#Default: -# none - -# TAG: qos_flows -# Allows you to select a TOS/DSCP value to mark outgoing -# connections with, based on where the reply was sourced. -# -# TOS values really only have local significance - so you should -# know what you're specifying. For more information, see RFC2474, -# RFC2475, and RFC3260. -# -# The TOS/DSCP byte must be exactly that - octet value 0x00-0xFF. -# Note that in practice often only values up to 0x3F are usable -# as the two highest bits have been redefined for use by ECN -# (RFC3168). -# -# This setting is configured by setting the source TOS values: -# -# local-hit=0xFF Value to mark local cache hits. -# -# sibling-hit=0xFF Value to mark hits from sibling peers. -# -# parent-hit=0xFF Value to mark hits from parent peers. -# -# -# NOTE: 'miss' preserve feature is only possible on Linux at this time. -# -# For the following to work correctly, you will need to patch your -# linux kernel with the TOS preserving ZPH patch. -# The kernel patch can be downloaded from http://zph.bratcheda.org -# -# disable-preserve-miss -# By default, the existing TOS value of the response coming -# from the remote server will be retained and masked with -# miss-mark. This option disables that feature. -# -# miss-mask=0xFF -# Allows you to mask certain bits in the TOS received from the -# remote server, before copying the value to the TOS sent -# towards clients. -# Default: 0xFF (TOS from server is not changed). -# -#Default: -# none - -# TAG: tcp_outgoing_address -# Allows you to map requests to different outgoing IP addresses -# based on the username or source address of the user making -# the request. -# -# tcp_outgoing_address ipaddr [[!]aclname] ... -# -# Example where requests from 10.0.0.0/24 will be forwarded -# with source address 10.1.0.1, 10.0.2.0/24 forwarded with -# source address 10.1.0.2 and the rest will be forwarded with -# source address 10.1.0.3. -# -# acl normal_service_net src 10.0.0.0/24 -# acl good_service_net src 10.0.2.0/24 -# tcp_outgoing_address 10.1.0.1 normal_service_net -# tcp_outgoing_address 10.1.0.2 good_service_net -# tcp_outgoing_address 10.1.0.3 -# -# Processing proceeds in the order specified, and stops at first fully -# matching line. -# -# Note: The use of this directive using client dependent ACLs is -# incompatible with the use of server side persistent connections. To -# ensure correct results it is best to set server_persistent_connections -# to off when using this directive in such configurations. -# -# -# IPv6 Magic: -# -# Squid is built with a capability of bridging the IPv4 and IPv6 -# internets. -# tcp_outgoing_address as exampled above breaks this bridging by forcing -# all outbound traffic through a certain IPv4 which may be on the wrong -# side of the IPv4/IPv6 boundary. -# -# To operate with tcp_outgoing_address and keep the bridging benefits -# an additional ACL needs to be used which ensures the IPv6-bound traffic -# is never forced or permitted out the IPv4 interface. -# -# # IPv6 destination test along with a dummy access control to perform the required DNS -# # This MUST be place before any ALLOW rules. -# acl to_ipv6 dst ipv6 -# http_access deny ipv6 !all -# -# tcp_outgoing_address 2001:db8::c001 good_service_net to_ipv6 -# tcp_outgoing_address 10.1.0.2 good_service_net !to_ipv6 -# -# tcp_outgoing_address 2001:db8::beef normal_service_net to_ipv6 -# tcp_outgoing_address 10.1.0.1 normal_service_net !to_ipv6 -# -# tcp_outgoing_address 2001:db8::1 to_ipv6 -# tcp_outgoing_address 10.1.0.3 !to_ipv6 -# -# WARNING: -# 'dst ipv6' bases its selection assuming DIRECT access. -# If peers are used the peername ACL are needed to select outgoing -# address which can link to the peer. -# -# 'dst ipv6' is a slow ACL. It will only work here if 'dst' is used -# previously in the http_access rules to locate the destination IP. -# Some more magic may be needed for that: -# http_access allow to_ipv6 !all -# (meaning, allow if to IPv6 but not from anywhere ;) -# -#Default: -# none - -# SSL OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: ssl_unclean_shutdown -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# Some browsers (especially MSIE) bugs out on SSL shutdown -# messages. -#Default: -# ssl_unclean_shutdown off - -# TAG: ssl_engine -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# The OpenSSL engine to use. You will need to set this if you -# would like to use hardware SSL acceleration for example. -#Default: -# none - -# TAG: sslproxy_client_certificate -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# Client SSL Certificate to use when proxying https:// URLs -#Default: -# none - -# TAG: sslproxy_client_key -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# Client SSL Key to use when proxying https:// URLs -#Default: -# none - -# TAG: sslproxy_version -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# SSL version level to use when proxying https:// URLs -#Default: -# sslproxy_version 1 - -# TAG: sslproxy_options -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# SSL engine options to use when proxying https:// URLs -# -# The most important being: -# -# NO_SSLv2 Disallow the use of SSLv2 -# NO_SSLv3 Disallow the use of SSLv3 -# NO_TLSv1 Disallow the use of TLSv1 -# SINGLE_DH_USE -# Always create a new key when using -# temporary/ephemeral DH key exchanges -# -# These options vary depending on your SSL engine. -# See the OpenSSL SSL_CTX_set_options documentation for a -# complete list of possible options. -#Default: -# none - -# TAG: sslproxy_cipher -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# SSL cipher list to use when proxying https:// URLs -# -# Colon separated list of supported ciphers. -#Default: -# none - -# TAG: sslproxy_cafile -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# file containing CA certificates to use when verifying server -# certificates while proxying https:// URLs -#Default: -# none - -# TAG: sslproxy_capath -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# directory containing CA certificates to use when verifying -# server certificates while proxying https:// URLs -#Default: -# none - -# TAG: ssl_bump -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# This ACL controls which CONNECT requests to an http_port -# marked with an sslBump flag are actually "bumped". Please -# see the sslBump flag of an http_port option for more details -# about decoding proxied SSL connections. -# -# By default, no requests are bumped. -# -# See also: http_port ssl-bump -# -# This clause supports both fast and slow acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -# -# -# # Example: Bump all requests except those originating from localhost and -# # those going to webax.com or example.com sites. -# -# acl localhost src 127.0.0.1/32 -# acl broken_sites dstdomain .webax.com -# acl broken_sites dstdomain .example.com -# ssl_bump deny localhost -# ssl_bump deny broken_sites -# ssl_bump allow all -#Default: -# none - -# TAG: sslproxy_flags -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# Various flags modifying the use of SSL while proxying https:// URLs: -# DONT_VERIFY_PEER Accept certificates that fail verification. -# For refined control, see sslproxy_cert_error. -# NO_DEFAULT_CA Don't use the default CA list built in -# to OpenSSL. -#Default: -# none - -# TAG: sslproxy_cert_error -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# Use this ACL to bypass server certificate validation errors. -# -# For example, the following lines will bypass all validation errors -# when talking to servers located at 172.16.0.0/16. All other -# validation errors will result in ERR_SECURE_CONNECT_FAIL error. -# -# acl BrokenServersAtTrustedIP dst 172.16.0.0/16 -# sslproxy_cert_error allow BrokenServersAtTrustedIP -# sslproxy_cert_error deny all -# -# This clause only supports fast acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -# Using slow acl types may result in server crashes -# -# Without this option, all server certificate validation errors -# terminate the transaction. Bypassing validation errors is dangerous -# because an error usually implies that the server cannot be trusted and -# the connection may be insecure. -# -# See also: sslproxy_flags and DONT_VERIFY_PEER. -# -# Default setting: sslproxy_cert_error deny all -#Default: -# none - -# TAG: sslpassword_program -# Note: This option is only available if Squid is rebuilt with the -# --enable-ssl option -# -# Specify a program used for entering SSL key passphrases -# when using encrypted SSL certificate keys. If not specified -# keys must either be unencrypted, or Squid started with the -N -# option to allow it to query interactively for the passphrase. -# -# The key file name is given as argument to the program allowing -# selection of the right password if you have multiple encrypted -# keys. -#Default: -# none - -#OPTIONS RELATING TO EXTERNAL SSL_CRTD -#----------------------------------------------------------------------------- - -# TAG: sslcrtd_program -# Note: This option is only available if Squid is rebuilt with the -# -DUSE_SSL_CRTD define -# -# Specify the location and options of the executable for ssl_crtd process. -# /usr/lib/squid3/ssl_crtd program requires -s and -M parameters -# For more information use: -# /usr/lib/squid3/ssl_crtd -h -#Default: -# sslcrtd_program /usr/lib/squid3/ssl_crtd -s /var/lib/ssl_db -M 4MB - -# TAG: sslcrtd_children -# Note: This option is only available if Squid is rebuilt with the -# -DUSE_SSL_CRTD define -# -# The maximum number of processes spawn to service ssl server. -# The maximum this may be safely set to is 32. -# -# You must have at least one ssl_crtd process. -#Default: -# sslcrtd_children 5 - -# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM -# ----------------------------------------------------------------------------- - -# TAG: cache_peer -# To specify other caches in a hierarchy, use the format: -# -# cache_peer hostname type http-port icp-port [options] -# -# For example, -# -# # proxy icp -# # hostname type port port options -# # -------------------- -------- ----- ----- ----------- -# cache_peer parent.foo.net parent 3128 3130 default -# cache_peer sib1.foo.net sibling 3128 3130 proxy-only -# cache_peer sib2.foo.net sibling 3128 3130 proxy-only -# cache_peer example.com parent 80 0 default -# cache_peer cdn.example.com sibling 3128 0 -# -# type: either 'parent', 'sibling', or 'multicast'. -# -# proxy-port: The port number where the peer accept HTTP requests. -# For other Squid proxies this is usually 3128 -# For web servers this is usually 80 -# -# icp-port: Used for querying neighbor caches about objects. -# Set to 0 if the peer does not support ICP or HTCP. -# See ICP and HTCP options below for additional details. -# -# -# ==== ICP OPTIONS ==== -# -# You MUST also set icp_port and icp_access explicitly when using these options. -# The defaults will prevent peer traffic using ICP. -# -# -# no-query Disable ICP queries to this neighbor. -# -# multicast-responder -# Indicates the named peer is a member of a multicast group. -# ICP queries will not be sent directly to the peer, but ICP -# replies will be accepted from it. -# -# closest-only Indicates that, for ICP_OP_MISS replies, we'll only forward -# CLOSEST_PARENT_MISSes and never FIRST_PARENT_MISSes. -# -# background-ping -# To only send ICP queries to this neighbor infrequently. -# This is used to keep the neighbor round trip time updated -# and is usually used in conjunction with weighted-round-robin. -# -# -# ==== HTCP OPTIONS ==== -# -# You MUST also set htcp_port and htcp_access explicitly when using these options. -# The defaults will prevent peer traffic using HTCP. -# -# -# htcp Send HTCP, instead of ICP, queries to the neighbor. -# You probably also want to set the "icp-port" to 4827 -# instead of 3130. -# -# htcp-oldsquid Send HTCP to old Squid versions. -# -# htcp-no-clr Send HTCP to the neighbor but without -# sending any CLR requests. This cannot be used with -# htcp-only-clr. -# -# htcp-only-clr Send HTCP to the neighbor but ONLY CLR requests. -# This cannot be used with htcp-no-clr. -# -# htcp-no-purge-clr -# Send HTCP to the neighbor including CLRs but only when -# they do not result from PURGE requests. -# -# htcp-forward-clr -# Forward any HTCP CLR requests this proxy receives to the peer. -# -# -# ==== PEER SELECTION METHODS ==== -# -# The default peer selection method is ICP, with the first responding peer -# being used as source. These options can be used for better load balancing. -# -# -# default This is a parent cache which can be used as a "last-resort" -# if a peer cannot be located by any of the peer-selection methods. -# If specified more than once, only the first is used. -# -# round-robin Load-Balance parents which should be used in a round-robin -# fashion in the absence of any ICP queries. -# weight=N can be used to add bias. -# -# weighted-round-robin -# Load-Balance parents which should be used in a round-robin -# fashion with the frequency of each parent being based on the -# round trip time. Closer parents are used more often. -# Usually used for background-ping parents. -# weight=N can be used to add bias. -# -# carp Load-Balance parents which should be used as a CARP array. -# The requests will be distributed among the parents based on the -# CARP load balancing hash function based on their weight. -# -# userhash Load-balance parents based on the client proxy_auth or ident username. -# -# sourcehash Load-balance parents based on the client source IP. -# -# multicast-siblings -# To be used only for cache peers of type "multicast". -# ALL members of this multicast group have "sibling" -# relationship with it, not "parent". This is to a multicast -# group when the requested object would be fetched only from -# a "parent" cache, anyway. It's useful, e.g., when -# configuring a pool of redundant Squid proxies, being -# members of the same multicast group. -# -# -# ==== PEER SELECTION OPTIONS ==== -# -# weight=N use to affect the selection of a peer during any weighted -# peer-selection mechanisms. -# The weight must be an integer; default is 1, -# larger weights are favored more. -# This option does not affect parent selection if a peering -# protocol is not in use. -# -# basetime=N Specify a base amount to be subtracted from round trip -# times of parents. -# It is subtracted before division by weight in calculating -# which parent to fectch from. If the rtt is less than the -# base time the rtt is set to a minimal value. -# -# ttl=N Specify a TTL to use when sending multicast ICP queries -# to this address. -# Only useful when sending to a multicast group. -# Because we don't accept ICP replies from random -# hosts, you must configure other group members as -# peers with the 'multicast-responder' option. -# -# no-delay To prevent access to this neighbor from influencing the -# delay pools. -# -# digest-url=URL Tell Squid to fetch the cache digest (if digests are -# enabled) for this host from the specified URL rather -# than the Squid default location. -# -# -# ==== ACCELERATOR / REVERSE-PROXY OPTIONS ==== -# -# originserver Causes this parent to be contacted as an origin server. -# Meant to be used in accelerator setups when the peer -# is a web server. -# -# forceddomain=name -# Set the Host header of requests forwarded to this peer. -# Useful in accelerator setups where the server (peer) -# expects a certain domain name but clients may request -# others. ie example.com or www.example.com -# -# no-digest Disable request of cache digests. -# -# no-netdb-exchange -# Disables requesting ICMP RTT database (NetDB). -# -# -# ==== AUTHENTICATION OPTIONS ==== -# -# login=user:password -# If this is a personal/workgroup proxy and your parent -# requires proxy authentication. -# -# Note: The string can include URL escapes (i.e. %20 for -# spaces). This also means % must be written as %%. -# -# login=PROXYPASS -# Send login details received from client to this peer. -# Authentication is not required, nor changed. -# -# Note: This will pass any form of authentication but -# only Basic auth will work through a proxy unless the -# connection-auth options are also used. -# -# login=PASS Send login details received from client to this peer. -# Authentication is not required by this option. -# If there are no client-provided authentication headers -# to pass on, but username and password are available -# from either proxy login or an external ACL user= and -# password= result tags they may be sent instead. -# -# Note: To combine this with proxy_auth both proxies must -# share the same user database as HTTP only allows for -# a single login (one for proxy, one for origin server). -# Also be warned this will expose your users proxy -# password to the peer. USE WITH CAUTION -# -# login=*:password -# Send the username to the upstream cache, but with a -# fixed password. This is meant to be used when the peer -# is in another administrative domain, but it is still -# needed to identify each user. -# The star can optionally be followed by some extra -# information which is added to the username. This can -# be used to identify this proxy to the peer, similar to -# the login=username:password option above. -# -# connection-auth=on|off -# Tell Squid that this peer does or not support Microsoft -# connection oriented authentication, and any such -# challenges received from there should be ignored. -# Default is auto to automatically determine the status -# of the peer. -# -# -# ==== SSL / HTTPS / TLS OPTIONS ==== -# -# ssl Encrypt connections to this peer with SSL/TLS. -# -# sslcert=/path/to/ssl/certificate -# A client SSL certificate to use when connecting to -# this peer. -# -# sslkey=/path/to/ssl/key -# The private SSL key corresponding to sslcert above. -# If 'sslkey' is not specified 'sslcert' is assumed to -# reference a combined file containing both the -# certificate and the key. -# -# sslversion=1|2|3|4 -# The SSL version to use when connecting to this peer -# 1 = automatic (default) -# 2 = SSL v2 only -# 3 = SSL v3 only -# 4 = TLS v1 only -# -# sslcipher=... The list of valid SSL ciphers to use when connecting -# to this peer. -# -# ssloptions=... Specify various SSL engine options: -# NO_SSLv2 Disallow the use of SSLv2 -# NO_SSLv3 Disallow the use of SSLv3 -# NO_TLSv1 Disallow the use of TLSv1 -# See src/ssl_support.c or the OpenSSL documentation for -# a more complete list. -# -# sslcafile=... A file containing additional CA certificates to use -# when verifying the peer certificate. -# -# sslcapath=... A directory containing additional CA certificates to -# use when verifying the peer certificate. -# -# sslcrlfile=... A certificate revocation list file to use when -# verifying the peer certificate. -# -# sslflags=... Specify various flags modifying the SSL implementation: -# -# DONT_VERIFY_PEER -# Accept certificates even if they fail to -# verify. -# NO_DEFAULT_CA -# Don't use the default CA list built in -# to OpenSSL. -# DONT_VERIFY_DOMAIN -# Don't verify the peer certificate -# matches the server name -# -# ssldomain= The peer name as advertised in it's certificate. -# Used for verifying the correctness of the received peer -# certificate. If not specified the peer hostname will be -# used. -# -# front-end-https -# Enable the "Front-End-Https: On" header needed when -# using Squid as a SSL frontend in front of Microsoft OWA. -# See MS KB document Q307347 for details on this header. -# If set to auto the header will only be added if the -# request is forwarded as a https:// URL. -# -# -# ==== GENERAL OPTIONS ==== -# -# connect-timeout=N -# A peer-specific connect timeout. -# Also see the peer_connect_timeout directive. -# -# connect-fail-limit=N -# How many times connecting to a peer must fail before -# it is marked as down. Default is 10. -# -# allow-miss Disable Squid's use of only-if-cached when forwarding -# requests to siblings. This is primarily useful when -# icp_hit_stale is used by the sibling. To extensive use -# of this option may result in forwarding loops, and you -# should avoid having two-way peerings with this option. -# For example to deny peer usage on requests from peer -# by denying cache_peer_access if the source is a peer. -# -# max-conn=N Limit the amount of connections Squid may open to this -# peer. see also -# -# name=xxx Unique name for the peer. -# Required if you have multiple peers on the same host -# but different ports. -# This name can be used in cache_peer_access and similar -# directives to dentify the peer. -# Can be used by outgoing access controls through the -# peername ACL type. -# -# no-tproxy Do not use the client-spoof TPROXY support when forwarding -# requests to this peer. Use normal address selection instead. -# -# proxy-only objects fetched from the peer will not be stored locally. -# -#Default: -# none - -# TAG: cache_peer_domain -# Use to limit the domains for which a neighbor cache will be -# queried. Usage: -# -# cache_peer_domain cache-host domain [domain ...] -# cache_peer_domain cache-host !domain -# -# For example, specifying -# -# cache_peer_domain parent.foo.net .edu -# -# has the effect such that UDP query packets are sent to -# 'bigserver' only when the requested object exists on a -# server in the .edu domain. Prefixing the domainname -# with '!' means the cache will be queried for objects -# NOT in that domain. -# -# NOTE: * Any number of domains may be given for a cache-host, -# either on the same or separate lines. -# * When multiple domains are given for a particular -# cache-host, the first matched domain is applied. -# * Cache hosts with no domain restrictions are queried -# for all requests. -# * There are no defaults. -# * There is also a 'cache_peer_access' tag in the ACL -# section. -#Default: -# none - -# TAG: cache_peer_access -# Similar to 'cache_peer_domain' but provides more flexibility by -# using ACL elements. -# -# cache_peer_access cache-host allow|deny [!]aclname ... -# -# The syntax is identical to 'http_access' and the other lists of -# ACL elements. See the comments for 'http_access' below, or -# the Squid FAQ (http://wiki.squid-cache.org/SquidFaq/SquidAcl). -#Default: -# none - -# TAG: neighbor_type_domain -# usage: neighbor_type_domain neighbor parent|sibling domain domain ... -# -# Modifying the neighbor type for specific domains is now -# possible. You can treat some domains differently than the the -# default neighbor type specified on the 'cache_peer' line. -# Normally it should only be necessary to list domains which -# should be treated differently because the default neighbor type -# applies for hostnames which do not match domains listed here. -# -#EXAMPLE: -# cache_peer cache.foo.org parent 3128 3130 -# neighbor_type_domain cache.foo.org sibling .com .net -# neighbor_type_domain cache.foo.org sibling .au .de -#Default: -# none - -# TAG: dead_peer_timeout (seconds) -# This controls how long Squid waits to declare a peer cache -# as "dead." If there are no ICP replies received in this -# amount of time, Squid will declare the peer dead and not -# expect to receive any further ICP replies. However, it -# continues to send ICP queries, and will mark the peer as -# alive upon receipt of the first subsequent ICP reply. -# -# This timeout also affects when Squid expects to receive ICP -# replies from peers. If more than 'dead_peer' seconds have -# passed since the last ICP reply was received, Squid will not -# expect to receive an ICP reply on the next query. Thus, if -# your time between requests is greater than this timeout, you -# will see a lot of requests sent DIRECT to origin servers -# instead of to your parents. -#Default: -# dead_peer_timeout 10 seconds - -# TAG: forward_max_tries -# Controls how many different forward paths Squid will try -# before giving up. See also forward_timeout. -#Default: -# forward_max_tries 10 - -# TAG: hierarchy_stoplist -# A list of words which, if found in a URL, cause the object to -# be handled directly by this cache. In other words, use this -# to not query neighbor caches for certain objects. You may -# list this option multiple times. -# -# Example: -# hierarchy_stoplist cgi-bin ? -# -# Note: never_direct overrides this option. -#Default: -# none - -# MEMORY CACHE OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: cache_mem (bytes) -# NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE. -# IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL -# USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER -# THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS. -# -# 'cache_mem' specifies the ideal amount of memory to be used -# for: -# * In-Transit objects -# * Hot Objects -# * Negative-Cached objects -# -# Data for these objects are stored in 4 KB blocks. This -# parameter specifies the ideal upper limit on the total size of -# 4 KB blocks allocated. In-Transit objects take the highest -# priority. -# -# In-transit objects have priority over the others. When -# additional space is needed for incoming data, negative-cached -# and hot objects will be released. In other words, the -# negative-cached and hot objects will fill up any unused space -# not needed for in-transit objects. -# -# If circumstances require, this limit will be exceeded. -# Specifically, if your incoming request rate requires more than -# 'cache_mem' of memory to hold in-transit objects, Squid will -# exceed this limit to satisfy the new requests. When the load -# decreases, blocks will be freed until the high-water mark is -# reached. Thereafter, blocks will be used to store hot -# objects. -#Default: -# cache_mem 256 MB - -# TAG: maximum_object_size_in_memory (bytes) -# Objects greater than this size will not be attempted to kept in -# the memory cache. This should be set high enough to keep objects -# accessed frequently in memory to improve performance whilst low -# enough to keep larger objects from hoarding cache_mem. -#Default: -# maximum_object_size_in_memory 512 KB - -# TAG: memory_replacement_policy -# The memory replacement policy parameter determines which -# objects are purged from memory when memory space is needed. -# -# See cache_replacement_policy for details. -#Default: -# memory_replacement_policy lru - -# DISK CACHE OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: cache_replacement_policy -# The cache replacement policy parameter determines which -# objects are evicted (replaced) when disk space is needed. -# -# lru : Squid's original list based LRU policy -# heap GDSF : Greedy-Dual Size Frequency -# heap LFUDA: Least Frequently Used with Dynamic Aging -# heap LRU : LRU policy implemented using a heap -# -# Applies to any cache_dir lines listed below this. -# -# The LRU policies keeps recently referenced objects. -# -# The heap GDSF policy optimizes object hit rate by keeping smaller -# popular objects in cache so it has a better chance of getting a -# hit. It achieves a lower byte hit rate than LFUDA though since -# it evicts larger (possibly popular) objects. -# -# The heap LFUDA policy keeps popular objects in cache regardless of -# their size and thus optimizes byte hit rate at the expense of -# hit rate since one large, popular object will prevent many -# smaller, slightly less popular objects from being cached. -# -# Both policies utilize a dynamic aging mechanism that prevents -# cache pollution that can otherwise occur with frequency-based -# replacement policies. -# -# NOTE: if using the LFUDA replacement policy you should increase -# the value of maximum_object_size above its default of 4096 KB to -# to maximize the potential byte hit rate improvement of LFUDA. -# -# For more information about the GDSF and LFUDA cache replacement -# policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html -# and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html. -#Default: -# cache_replacement_policy lru - -# TAG: cache_dir -# Usage: -# -# cache_dir Type Directory-Name Fs-specific-data [options] -# -# You can specify multiple cache_dir lines to spread the -# cache among different disk partitions. -# -# Type specifies the kind of storage system to use. Only "ufs" -# is built by default. To enable any of the other storage systems -# see the --enable-storeio configure option. -# -# 'Directory' is a top-level directory where cache swap -# files will be stored. If you want to use an entire disk -# for caching, this can be the mount-point directory. -# The directory must exist and be writable by the Squid -# process. Squid will NOT create this directory for you. -# -# The ufs store type: -# -# "ufs" is the old well-known Squid storage format that has always -# been there. -# -# cache_dir ufs Directory-Name Mbytes L1 L2 [options] -# -# 'Mbytes' is the amount of disk space (MB) to use under this -# directory. The default is 100 MB. Change this to suit your -# configuration. Do NOT put the size of your disk drive here. -# Instead, if you want Squid to use the entire disk drive, -# subtract 20% and use that value. -# -# 'L1' is the number of first-level subdirectories which -# will be created under the 'Directory'. The default is 16. -# -# 'L2' is the number of second-level subdirectories which -# will be created under each first-level directory. The default -# is 256. -# -# The aufs store type: -# -# "aufs" uses the same storage format as "ufs", utilizing -# POSIX-threads to avoid blocking the main Squid process on -# disk-I/O. This was formerly known in Squid as async-io. -# -# cache_dir aufs Directory-Name Mbytes L1 L2 [options] -# -# see argument descriptions under ufs above -# -# The diskd store type: -# -# "diskd" uses the same storage format as "ufs", utilizing a -# separate process to avoid blocking the main Squid process on -# disk-I/O. -# -# cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n] -# -# see argument descriptions under ufs above -# -# Q1 specifies the number of unacknowledged I/O requests when Squid -# stops opening new files. If this many messages are in the queues, -# Squid won't open new files. Default is 64 -# -# Q2 specifies the number of unacknowledged messages when Squid -# starts blocking. If this many messages are in the queues, -# Squid blocks until it receives some replies. Default is 72 -# -# When Q1 < Q2 (the default), the cache directory is optimized -# for lower response time at the expense of a decrease in hit -# ratio. If Q1 > Q2, the cache directory is optimized for -# higher hit ratio at the expense of an increase in response -# time. -# -# The coss store type: -# -# NP: COSS filesystem in Squid-3 has been deemed too unstable for -# production use and has thus been removed from this release. -# We hope that it can be made usable again soon. -# -# block-size=n defines the "block size" for COSS cache_dir's. -# Squid uses file numbers as block numbers. Since file numbers -# are limited to 24 bits, the block size determines the maximum -# size of the COSS partition. The default is 512 bytes, which -# leads to a maximum cache_dir size of 512<<24, or 8 GB. Note -# you should not change the coss block size after Squid -# has written some objects to the cache_dir. -# -# The coss file store has changed from 2.5. Now it uses a file -# called 'stripe' in the directory names in the config - and -# this will be created by squid -z. -# -# Common options: -# -# no-store, no new objects should be stored to this cache_dir -# -# max-size=n, refers to the max object size in bytes this cache_dir -# supports. It is used to select the cache_dir to store the object. -# Note: To make optimal use of the max-size limits you should order -# the cache_dir lines with the smallest max-size value first and the -# ones with no max-size specification last. -# -# Note for coss, max-size must be less than COSS_MEMBUF_SZ, -# which can be changed with the --with-coss-membuf-size=N configure -# option. -# - -# Uncomment and adjust the following to add a disk cache directory. -#cache_dir ufs /var/spool/squid3 100 16 256 -cache_dir ufs /var/spool/squid3 8192 16 1024 - -# TAG: store_dir_select_algorithm -# Set this to 'round-robin' as an alternative. -#Default: -# store_dir_select_algorithm least-load - -# TAG: max_open_disk_fds -# To avoid having disk as the I/O bottleneck Squid can optionally -# bypass the on-disk cache if more than this amount of disk file -# descriptors are open. -# -# A value of 0 indicates no limit. -#Default: -# max_open_disk_fds 0 - -# TAG: minimum_object_size (bytes) -# Objects smaller than this size will NOT be saved on disk. The -# value is specified in kilobytes, and the default is 0 KB, which -# means there is no minimum. -#Default: -# minimum_object_size 0 KB - -# TAG: maximum_object_size (bytes) -# Objects larger than this size will NOT be saved on disk. The -# value is specified in kilobytes, and the default is 4MB. If -# you wish to get a high BYTES hit ratio, you should probably -# increase this (one 32 MB object hit counts for 3200 10KB -# hits). If you wish to increase speed more than your want to -# save bandwidth you should leave this low. -# -# NOTE: if using the LFUDA replacement policy you should increase -# this value to maximize the byte hit rate improvement of LFUDA! -# See replacement_policy below for a discussion of this policy. -#Default: -# maximum_object_size 4096 KB -maximum_object_size 153600 KB - -# TAG: cache_swap_low (percent, 0-100) -#Default: -# cache_swap_low 90 - -# TAG: cache_swap_high (percent, 0-100) -# -# The low- and high-water marks for cache object replacement. -# Replacement begins when the swap (disk) usage is above the -# low-water mark and attempts to maintain utilization near the -# low-water mark. As swap utilization gets close to high-water -# mark object eviction becomes more aggressive. If utilization is -# close to the low-water mark less replacement is done each time. -# -# Defaults are 90% and 95%. If you have a large cache, 5% could be -# hundreds of MB. If this is the case you may wish to set these -# numbers closer together. -#Default: -# cache_swap_high 95 - -# LOGFILE OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: logformat -# Usage: -# -# logformat -# -# Defines an access log format. -# -# The is a string with embedded % format codes -# -# % format codes all follow the same basic structure where all but -# the formatcode is optional. Output strings are automatically escaped -# as required according to their context and the output format -# modifiers are usually not needed, but can be specified if an explicit -# output format is desired. -# -# % ["|[|'|#] [-] [[0]width] [{argument}] formatcode -# -# " output in quoted string format -# [ output in squid text log format as used by log_mime_hdrs -# # output in URL quoted format -# ' output as-is -# -# - left aligned -# width field width. If starting with 0 the -# output is zero padded -# {arg} argument such as header name etc -# -# Format codes: -# -# % a literal % character -# >a Client source IP address -# >A Client FQDN -# >p Client source port -# h Original request header. Optional header name argument -# on the format header[:[separator]element] -# [http::]>ha The HTTP request headers after adaptation and redirection. -# Optional header name argument as for >h -# [http::]h -# [http::]un User name -# [http::]ul User name from authentication -# [http::]ui User name from ident -# [http::]us User name from SSL -# [http::]ue User name from external acl helper -# [http::]>Hs HTTP status code sent to the client -# [http::]st Received request size including HTTP headers. In the -# case of chunked requests the chunked encoding metadata -# are not included -# [http::]>sh Received HTTP request headers size -# [http::]a %Ss/%03>Hs %a %Ss/%03>Hs %h] [%a %ui %un [%tl] "%rm %ru HTTP/%rv" %>Hs %a %ui %un [%tl] "%rm %ru HTTP/%rv" %>Hs %h" "%{User-Agent}>h" %Ss:%Sh -#Default: -# none - -# TAG: access_log -# These files log client request activities. Has a line every HTTP or -# ICP request. The format is: -# access_log [ [acl acl ...]] -# access_log none [acl acl ...]] -# -# Will log to the specified file using the specified format (which -# must be defined in a logformat directive) those entries which match -# ALL the acl's specified (which must be defined in acl clauses). -# -# If no acl is specified, all requests will be logged to this file. -# -# To disable logging of a request use the filepath "none", in which case -# a logformat name should not be specified. -# -# To log the request via syslog specify a filepath of "syslog": -# -# access_log syslog[:facility.priority] [format [acl1 [acl2 ....]]] -# where facility could be any of: -# authpriv, daemon, local0 .. local7 or user. -# -# And priority could be any of: -# err, warning, notice, info, debug. -# -# Default: -# access_log /var/log/squid3/access.log squid -#Default: -# access_log /var/log/squid3/access.log squid - -# TAG: icap_log -# ICAP log files record ICAP transaction summaries, one line per -# transaction. -# -# The icap_log option format is: -# icap_log [ [acl acl ...]] -# icap_log none [acl acl ...]] -# -# Please see access_log option documentation for details. The two -# kinds of logs share the overall configuration approach and many -# features. -# -# ICAP processing of a single HTTP message or transaction may -# require multiple ICAP transactions. In such cases, multiple -# ICAP transaction log lines will correspond to a single access -# log line. -# -# ICAP log uses logformat codes that make sense for an ICAP -# transaction. Header-related codes are applied to the HTTP header -# embedded in an ICAP server response, with the following caveats: -# For REQMOD, there is no HTTP response header unless the ICAP -# server performed request satisfaction. For RESPMOD, the HTTP -# request header is the header sent to the ICAP server. For -# OPTIONS, there are no HTTP headers. -# -# The following format codes are also available for ICAP logs: -# -# icap::st Bytes sent to the ICAP server (TCP payload -# only; i.e., what Squid writes to the socket). -# -# icap::h ICAP request header(s). Similar to >h. -# -# icap::a %icap::to/%03icap::Hs %icap::'. -# -# Note, from Squid-3.1 this option has no effect on the cache.log, -# that log can be rotated separately by using debug_options -# -# Note2, for Debian/Linux the default of logfile_rotate is -# zero, since it includes external logfile-rotation methods. -#Default: -# logfile_rotate 0 - -# TAG: emulate_httpd_log on|off -# The Cache can emulate the log file format which many 'httpd' -# programs use. To disable/enable this emulation, set -# emulate_httpd_log to 'off' or 'on'. The default -# is to use the native log format since it includes useful -# information Squid-specific log analyzers use. -#Default: -# emulate_httpd_log off - -# TAG: log_ip_on_direct on|off -# Log the destination IP address in the hierarchy log tag when going -# direct. Earlier Squid versions logged the hostname here. If you -# prefer the old way set this to off. -#Default: -# log_ip_on_direct on - -# TAG: mime_table -# Pathname to Squid's MIME table. You shouldn't need to change -# this, but the default file contains examples and formatting -# information if you do. -#Default: -# mime_table /usr/share/squid3/mime.conf - -# TAG: log_mime_hdrs on|off -# The Cache can record both the request and the response MIME -# headers for each HTTP transaction. The headers are encoded -# safely and will appear as two bracketed fields at the end of -# the access log (for either the native or httpd-emulated log -# formats). To enable this logging set log_mime_hdrs to 'on'. -#Default: -# log_mime_hdrs off - -# TAG: useragent_log -# Note: This option is only available if Squid is rebuilt with the -# --enable-useragent-log option -# -# Squid will write the User-Agent field from HTTP requests -# to the filename specified here. By default useragent_log -# is disabled. -#Default: -# none - -# TAG: referer_log -# Note: This option is only available if Squid is rebuilt with the -# --enable-referer-log option -# -# Squid will write the Referer field from HTTP requests to the -# filename specified here. By default referer_log is disabled. -# Note that "referer" is actually a misspelling of "referrer" -# however the misspelt version has been accepted into the HTTP RFCs -# and we accept both. -#Default: -# none - -# TAG: pid_filename -# A filename to write the process-id to. To disable, enter "none". -#Default: -# pid_filename /var/run/squid3.pid - -# TAG: log_fqdn on|off -# Turn this on if you wish to log fully qualified domain names -# in the access.log. To do this Squid does a DNS lookup of all -# IP's connecting to it. This can (in some situations) increase -# latency, which makes your cache seem slower for interactive -# browsing. -#Default: -# log_fqdn off - -# TAG: client_netmask -# A netmask for client addresses in logfiles and cachemgr output. -# Change this to protect the privacy of your cache clients. -# A netmask of 255.255.255.0 will log all IP's in that range with -# the last digit set to '0'. -#Default: -# client_netmask no_addr - -# TAG: forward_log -# Note: This option is only available if Squid is rebuilt with the -# -DWIP_FWD_LOG define -# -# Logs the server-side requests. -# -# This is currently work in progress. -#Default: -# none - -# TAG: strip_query_terms -# By default, Squid strips query terms from requested URLs before -# logging. This protects your user's privacy. -#Default: -# strip_query_terms on - -# TAG: buffered_logs on|off -# cache.log log file is written with stdio functions, and as such -# it can be buffered or unbuffered. By default it will be unbuffered. -# Buffering it can speed up the writing slightly (though you are -# unlikely to need to worry unless you run with tons of debugging -# enabled in which case performance will suffer badly anyway..). -#Default: -# buffered_logs off - -# TAG: netdb_filename -# Note: This option is only available if Squid is rebuilt with the -# --enable-icmp option -# -# A filename where Squid stores it's netdb state between restarts. -# To disable, enter "none". -#Default: -# netdb_filename /var/log/squid3/netdb.state - -# OPTIONS FOR TROUBLESHOOTING -# ----------------------------------------------------------------------------- - -# TAG: cache_log -# Cache logging file. This is where general information about -# your cache's behavior goes. You can increase the amount of data -# logged to this file and how often its rotated with "debug_options" -#Default: -# cache_log /var/log/squid3/cache.log - -# TAG: debug_options -# Logging options are set as section,level where each source file -# is assigned a unique section. Lower levels result in less -# output, Full debugging (level 9) can result in a very large -# log file, so be careful. -# -# The magic word "ALL" sets debugging levels for all sections. -# We recommend normally running with "ALL,1". -# -# The rotate=N option can be used to keep more or less of these logs -# than would otherwise be kept by logfile_rotate. -# For most uses a single log should be enough to monitor current -# events affecting Squid. -#Default: -# debug_options ALL,1 - -# TAG: coredump_dir -# By default Squid leaves core files in the directory from where -# it was started. If you set 'coredump_dir' to a directory -# that exists, Squid will chdir() to that directory at startup -# and coredump files will be left there. -# -#Default: -# coredump_dir none -# - -# Leave coredumps in the first cache dir -coredump_dir /var/spool/squid3 - -# OPTIONS FOR FTP GATEWAYING -# ----------------------------------------------------------------------------- - -# TAG: ftp_user -# If you want the anonymous login password to be more informative -# (and enable the use of picky ftp servers), set this to something -# reasonable for your domain, like wwwuser@somewhere.net -# -# The reason why this is domainless by default is the -# request can be made on the behalf of a user in any domain, -# depending on how the cache is used. -# Some ftp server also validate the email address is valid -# (for example perl.com). -#Default: -# ftp_user Squid@ - -# TAG: ftp_list_width -# Sets the width of ftp listings. This should be set to fit in -# the width of a standard browser. Setting this too small -# can cut off long filenames when browsing ftp sites. -#Default: -# ftp_list_width 32 - -# TAG: ftp_passive -# If your firewall does not allow Squid to use passive -# connections, turn off this option. -# -# Use of ftp_epsv_all option requires this to be ON. -#Default: -# ftp_passive on - -# TAG: ftp_epsv_all -# FTP Protocol extensions permit the use of a special "EPSV ALL" command. -# -# NATs may be able to put the connection on a "fast path" through the -# translator, as the EPRT command will never be used and therefore, -# translation of the data portion of the segments will never be needed. -# -# When a client only expects to do two-way FTP transfers this may be -# useful. -# If squid finds that it must do a three-way FTP transfer after issuing -# an EPSV ALL command, the FTP session will fail. -# -# If you have any doubts about this option do not use it. -# Squid will nicely attempt all other connection methods. -# -# Requires ftp_passive to be ON (default) for any effect. -#Default: -# ftp_epsv_all off - -# TAG: ftp_epsv -# FTP Protocol extensions permit the use of a special "EPSV" command. -# -# NATs may be able to put the connection on a "fast path" through the -# translator using EPSV, as the EPRT command will never be used -# and therefore, translation of the data portion of the segments -# will never be needed. -# -# Turning this OFF will prevent EPSV being attempted. -# WARNING: Doing so will convert Squid back to the old behavior with all -# the related problems with external NAT devices/layers. -# -# Requires ftp_passive to be ON (default) for any effect. -#Default: -# ftp_epsv on - -# TAG: ftp_eprt -# FTP Protocol extensions permit the use of a special "EPRT" command. -# -# This extension provides a protocol neutral alternative to the -# IPv4-only PORT command. When supported it enables active FTP data -# channels over IPv6 and efficient NAT handling. -# -# Turning this OFF will prevent EPRT being attempted and will skip -# straight to using PORT for IPv4 servers. -# -# Some devices are known to not handle this extension correctly and -# may result in crashes. Devices which suport EPRT enough to fail -# cleanly will result in Squid attempting PORT anyway. This directive -# should only be disabled when EPRT results in device failures. -# -# WARNING: Doing so will convert Squid back to the old behavior with all -# the related problems with external NAT devices/layers and IPv4-only FTP. -#Default: -# ftp_eprt on - -# TAG: ftp_sanitycheck -# For security and data integrity reasons Squid by default performs -# sanity checks of the addresses of FTP data connections ensure the -# data connection is to the requested server. If you need to allow -# FTP connections to servers using another IP address for the data -# connection turn this off. -#Default: -# ftp_sanitycheck on - -# TAG: ftp_telnet_protocol -# The FTP protocol is officially defined to use the telnet protocol -# as transport channel for the control connection. However, many -# implementations are broken and does not respect this aspect of -# the FTP protocol. -# -# If you have trouble accessing files with ASCII code 255 in the -# path or similar problems involving this ASCII code you can -# try setting this directive to off. If that helps, report to the -# operator of the FTP server in question that their FTP server -# is broken and does not follow the FTP standard. -#Default: -# ftp_telnet_protocol on - -# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS -# ----------------------------------------------------------------------------- - -# TAG: diskd_program -# Specify the location of the diskd executable. -# Note this is only useful if you have compiled in -# diskd as one of the store io modules. -#Default: -# diskd_program /usr/lib/squid3/diskd - -# TAG: unlinkd_program -# Specify the location of the executable for file deletion process. -#Default: -# unlinkd_program /usr/lib/squid3/unlinkd - -# TAG: pinger_program -# Note: This option is only available if Squid is rebuilt with the -# --enable-icmp option -# -# Specify the location of the executable for the pinger process. -#Default: -# pinger_program /usr/lib/squid3/pinger - -# TAG: pinger_enable -# Note: This option is only available if Squid is rebuilt with the -# --enable-icmp option -# -# Control whether the pinger is active at run-time. -# Enables turning ICMP pinger on and off with a simple -# squid -k reconfigure. -#Default: -# pinger_enable off - -# OPTIONS FOR URL REWRITING -# ----------------------------------------------------------------------------- - -# TAG: url_rewrite_program -# Specify the location of the executable URL rewriter to use. -# Since they can perform almost any function there isn't one included. -# -# For each requested URL, the rewriter will receive on line with the format -# -# URL client_ip "/" fqdn user method [ kvpairs] -# -# In the future, the rewriter interface will be extended with -# key=value pairs ("kvpairs" shown above). Rewriter programs -# should be prepared to receive and possibly ignore additional -# whitespace-separated tokens on each input line. -# -# And the rewriter may return a rewritten URL. The other components of -# the request line does not need to be returned (ignored if they are). -# -# The rewriter can also indicate that a client-side redirect should -# be performed to the new URL. This is done by prefixing the returned -# URL with "301:" (moved permanently) or 302: (moved temporarily), etc. -# -# By default, a URL rewriter is not used. -#Default: -# none - -# TAG: url_rewrite_children -# The number of redirector processes to spawn. If you start -# too few Squid will have to wait for them to process a backlog of -# URLs, slowing it down. If you start too many they will use RAM -# and other system resources. -#Default: -# url_rewrite_children 5 - -# TAG: url_rewrite_concurrency -# The number of requests each redirector helper can handle in -# parallel. Defaults to 0 which indicates the redirector -# is a old-style single threaded redirector. -# -# When this directive is set to a value >= 1 then the protocol -# used to communicate with the helper is modified to include -# a request ID in front of the request/response. The request -# ID from the request must be echoed back with the response -# to that request. -#Default: -# url_rewrite_concurrency 0 - -# TAG: url_rewrite_host_header -# By default Squid rewrites any Host: header in redirected -# requests. If you are running an accelerator this may -# not be a wanted effect of a redirector. -# -# WARNING: Entries are cached on the result of the URL rewriting -# process, so be careful if you have domain-virtual hosts. -#Default: -# url_rewrite_host_header on - -# TAG: url_rewrite_access -# If defined, this access list specifies which requests are -# sent to the redirector processes. By default all requests -# are sent. -# -# This clause supports both fast and slow acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -#Default: -# none - -# TAG: url_rewrite_bypass -# When this is 'on', a request will not go through the -# redirector if all redirectors are busy. If this is 'off' -# and the redirector queue grows too large, Squid will exit -# with a FATAL error and ask you to increase the number of -# redirectors. You should only enable this if the redirectors -# are not critical to your caching system. If you use -# redirectors for access control, and you enable this option, -# users may have access to pages they should not -# be allowed to request. -#Default: -# url_rewrite_bypass off - -# OPTIONS FOR TUNING THE CACHE -# ----------------------------------------------------------------------------- - -# TAG: cache -# A list of ACL elements which, if matched and denied, cause the request to -# not be satisfied from the cache and the reply to not be cached. -# In other words, use this to force certain objects to never be cached. -# -# You must use the words 'allow' or 'deny' to indicate whether items -# matching the ACL should be allowed or denied into the cache. -# -# Default is to allow all to be cached. -# -# This clause supports both fast and slow acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -#Default: -# none - -# TAG: refresh_pattern -# usage: refresh_pattern [-i] regex min percent max [options] -# -# By default, regular expressions are CASE-SENSITIVE. To make -# them case-insensitive, use the -i option. -# -# 'Min' is the time (in minutes) an object without an explicit -# expiry time should be considered fresh. The recommended -# value is 0, any higher values may cause dynamic applications -# to be erroneously cached unless the application designer -# has taken the appropriate actions. -# -# 'Percent' is a percentage of the objects age (time since last -# modification age) an object without explicit expiry time -# will be considered fresh. -# -# 'Max' is an upper limit on how long objects without an explicit -# expiry time will be considered fresh. -# -# options: override-expire -# override-lastmod -# reload-into-ims -# ignore-reload -# ignore-no-cache -# ignore-no-store -# ignore-must-revalidate -# ignore-private -# ignore-auth -# refresh-ims -# -# override-expire enforces min age even if the server -# sent an explicit expiry time (e.g., with the -# Expires: header or Cache-Control: max-age). Doing this -# VIOLATES the HTTP standard. Enabling this feature -# could make you liable for problems which it causes. -# -# Note: override-expire does not enforce staleness - it only extends -# freshness / min. If the server returns a Expires time which -# is longer than your max time, Squid will still consider -# the object fresh for that period of time. -# -# override-lastmod enforces min age even on objects -# that were modified recently. -# -# reload-into-ims changes client no-cache or ``reload'' -# to If-Modified-Since requests. Doing this VIOLATES the -# HTTP standard. Enabling this feature could make you -# liable for problems which it causes. -# -# ignore-reload ignores a client no-cache or ``reload'' -# header. Doing this VIOLATES the HTTP standard. Enabling -# this feature could make you liable for problems which -# it causes. -# -# ignore-no-cache ignores any ``Pragma: no-cache'' and -# ``Cache-control: no-cache'' headers received from a server. -# The HTTP RFC never allows the use of this (Pragma) header -# from a server, only a client, though plenty of servers -# send it anyway. -# -# ignore-no-store ignores any ``Cache-control: no-store'' -# headers received from a server. Doing this VIOLATES -# the HTTP standard. Enabling this feature could make you -# liable for problems which it causes. -# -# ignore-must-revalidate ignores any ``Cache-Control: must-revalidate`` -# headers received from a server. Doing this VIOLATES -# the HTTP standard. Enabling this feature could make you -# liable for problems which it causes. -# -# ignore-private ignores any ``Cache-control: private'' -# headers received from a server. Doing this VIOLATES -# the HTTP standard. Enabling this feature could make you -# liable for problems which it causes. -# -# ignore-auth caches responses to requests with authorization, -# as if the originserver had sent ``Cache-control: public'' -# in the response header. Doing this VIOLATES the HTTP standard. -# Enabling this feature could make you liable for problems which -# it causes. -# -# refresh-ims causes squid to contact the origin server -# when a client issues an If-Modified-Since request. This -# ensures that the client will receive an updated version -# if one is available. -# -# Basically a cached object is: -# -# FRESH if expires < now, else STALE -# STALE if age > max -# FRESH if lm-factor < percent, else STALE -# FRESH if age < min -# else STALE -# -# The refresh_pattern lines are checked in the order listed here. -# The first entry which matches is used. If none of the entries -# match the default will be used. -# -# Note, you must uncomment all the default lines if you want -# to change one. The default setting is only active if none is -# used. -# -# - -# Add any of your own refresh_pattern entries above these. -refresh_pattern ^ftp: 1440 20% 10080 -refresh_pattern ^gopher: 1440 0% 1440 -refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 -refresh_pattern /(|In)Release(|\.gpg)$ 0 0% 0 -refresh_pattern /(Packages|Sources)(|\.gz|\.bz2|\.xz)$ 0 0% 0 -refresh_pattern \.deb$ 129600 100% 129600 -refresh_pattern \.udeb$ 129600 100% 129600 -refresh_pattern \.tar\.(gz|bz2|xz|lzma)$ 129600 100% 129600 -refresh_pattern . 0 20% 4320 - -# TAG: quick_abort_min (KB) -#Default: -# quick_abort_min 16 KB - -# TAG: quick_abort_max (KB) -#Default: -# quick_abort_max 16 KB - -# TAG: quick_abort_pct (percent) -# The cache by default continues downloading aborted requests -# which are almost completed (less than 16 KB remaining). This -# may be undesirable on slow (e.g. SLIP) links and/or very busy -# caches. Impatient users may tie up file descriptors and -# bandwidth by repeatedly requesting and immediately aborting -# downloads. -# -# When the user aborts a request, Squid will check the -# quick_abort values to the amount of data transfered until -# then. -# -# If the transfer has less than 'quick_abort_min' KB remaining, -# it will finish the retrieval. -# -# If the transfer has more than 'quick_abort_max' KB remaining, -# it will abort the retrieval. -# -# If more than 'quick_abort_pct' of the transfer has completed, -# it will finish the retrieval. -# -# If you do not want any retrieval to continue after the client -# has aborted, set both 'quick_abort_min' and 'quick_abort_max' -# to '0 KB'. -# -# If you want retrievals to always continue if they are being -# cached set 'quick_abort_min' to '-1 KB'. -#Default: -# quick_abort_pct 95 - -# TAG: read_ahead_gap buffer-size -# The amount of data the cache will buffer ahead of what has been -# sent to the client when retrieving an object from another server. -#Default: -# read_ahead_gap 16 KB - -# TAG: negative_ttl time-units -# Set the Default Time-to-Live (TTL) for failed requests. -# Certain types of failures (such as "connection refused" and -# "404 Not Found") are able to be negatively-cached for a short time. -# Modern web servers should provide Expires: header, however if they -# do not this can provide a minimum TTL. -# The default is not to cache errors with unknown expiry details. -# -# Note that this is different from negative caching of DNS lookups. -# -# WARNING: Doing this VIOLATES the HTTP standard. Enabling -# this feature could make you liable for problems which it -# causes. -#Default: -# negative_ttl 0 seconds - -# TAG: positive_dns_ttl time-units -# Upper limit on how long Squid will cache positive DNS responses. -# Default is 6 hours (360 minutes). This directive must be set -# larger than negative_dns_ttl. -#Default: -# positive_dns_ttl 6 hours - -# TAG: negative_dns_ttl time-units -# Time-to-Live (TTL) for negative caching of failed DNS lookups. -# This also sets the lower cache limit on positive lookups. -# Minimum value is 1 second, and it is not recommendable to go -# much below 10 seconds. -#Default: -# negative_dns_ttl 1 minutes - -# TAG: range_offset_limit (bytes) -# Sets a upper limit on how far into the the file a Range request -# may be to cause Squid to prefetch the whole file. If beyond this -# limit Squid forwards the Range request as it is and the result -# is NOT cached. -# -# This is to stop a far ahead range request (lets say start at 17MB) -# from making Squid fetch the whole object up to that point before -# sending anything to the client. -# -# A value of 0 causes Squid to never fetch more than the -# client requested. (default) -# -# A value of -1 causes Squid to always fetch the object from the -# beginning so it may cache the result. (2.0 style) -# -# NP: Using -1 here will override any quick_abort settings that may -# otherwise apply to the range request. The range request will -# be fully fetched from start to finish regardless of the client -# actions. This affects bandwidth usage. -#Default: -# range_offset_limit 0 KB - -# TAG: minimum_expiry_time (seconds) -# The minimum caching time according to (Expires - Date) -# Headers Squid honors if the object can't be revalidated -# defaults to 60 seconds. In reverse proxy environments it -# might be desirable to honor shorter object lifetimes. It -# is most likely better to make your server return a -# meaningful Last-Modified header however. In ESI environments -# where page fragments often have short lifetimes, this will -# often be best set to 0. -#Default: -# minimum_expiry_time 60 seconds - -# TAG: store_avg_object_size (kbytes) -# Average object size, used to estimate number of objects your -# cache can hold. The default is 13 KB. -#Default: -# store_avg_object_size 13 KB - -# TAG: store_objects_per_bucket -# Target number of objects per bucket in the store hash table. -# Lowering this value increases the total number of buckets and -# also the storage maintenance rate. The default is 20. -#Default: -# store_objects_per_bucket 20 - -# HTTP OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: request_header_max_size (KB) -# This specifies the maximum size for HTTP headers in a request. -# Request headers are usually relatively small (about 512 bytes). -# Placing a limit on the request header size will catch certain -# bugs (for example with persistent connections) and possibly -# buffer-overflow or denial-of-service attacks. -#Default: -# request_header_max_size 64 KB - -# TAG: reply_header_max_size (KB) -# This specifies the maximum size for HTTP headers in a reply. -# Reply headers are usually relatively small (about 512 bytes). -# Placing a limit on the reply header size will catch certain -# bugs (for example with persistent connections) and possibly -# buffer-overflow or denial-of-service attacks. -#Default: -# reply_header_max_size 64 KB - -# TAG: request_body_max_size (bytes) -# This specifies the maximum size for an HTTP request body. -# In other words, the maximum size of a PUT/POST request. -# A user who attempts to send a request with a body larger -# than this limit receives an "Invalid Request" error message. -# If you set this parameter to a zero (the default), there will -# be no limit imposed. -#Default: -# request_body_max_size 0 KB - -# TAG: client_request_buffer_max_size (bytes) -# This specifies the maximum buffer size of a client request. -# It prevents squid eating too much memory when somebody uploads -# a large file. -#Default: -# client_request_buffer_max_size 512 KB - -# TAG: chunked_request_body_max_size (bytes) -# A broken or confused HTTP/1.1 client may send a chunked HTTP -# request to Squid. Squid does not have full support for that -# feature yet. To cope with such requests, Squid buffers the -# entire request and then dechunks request body to create a -# plain HTTP/1.0 request with a known content length. The plain -# request is then used by the rest of Squid code as usual. -# -# The option value specifies the maximum size of the buffer used -# to hold the request before the conversion. If the chunked -# request size exceeds the specified limit, the conversion -# fails, and the client receives an "unsupported request" error, -# as if dechunking was disabled. -# -# Dechunking is enabled by default. To disable conversion of -# chunked requests, set the maximum to zero. -# -# Request dechunking feature and this option in particular are a -# temporary hack. When chunking requests and responses are fully -# supported, there will be no need to buffer a chunked request. -#Default: -# chunked_request_body_max_size 64 KB - -# TAG: broken_posts -# A list of ACL elements which, if matched, causes Squid to send -# an extra CRLF pair after the body of a PUT/POST request. -# -# Some HTTP servers has broken implementations of PUT/POST, -# and rely on an extra CRLF pair sent by some WWW clients. -# -# Quote from RFC2616 section 4.1 on this matter: -# -# Note: certain buggy HTTP/1.0 client implementations generate an -# extra CRLF's after a POST request. To restate what is explicitly -# forbidden by the BNF, an HTTP/1.1 client must not preface or follow -# a request with an extra CRLF. -# -# This clause only supports fast acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -# -#Example: -# acl buggy_server url_regex ^http://.... -# broken_posts allow buggy_server -#Default: -# none - -# TAG: icap_uses_indirect_client on|off -# Controls whether the indirect client IP address (instead of the direct -# client IP address) is passed to adaptation services. -# -# See also: follow_x_forwarded_for adaptation_send_client_ip -#Default: -# icap_uses_indirect_client on - -# TAG: via on|off -# If set (default), Squid will include a Via header in requests and -# replies as required by RFC2616. -#Default: -# via on - -# TAG: ie_refresh on|off -# Microsoft Internet Explorer up until version 5.5 Service -# Pack 1 has an issue with transparent proxies, wherein it -# is impossible to force a refresh. Turning this on provides -# a partial fix to the problem, by causing all IMS-REFRESH -# requests from older IE versions to check the origin server -# for fresh content. This reduces hit ratio by some amount -# (~10% in my experience), but allows users to actually get -# fresh content when they want it. Note because Squid -# cannot tell if the user is using 5.5 or 5.5SP1, the behavior -# of 5.5 is unchanged from old versions of Squid (i.e. a -# forced refresh is impossible). Newer versions of IE will, -# hopefully, continue to have the new behavior and will be -# handled based on that assumption. This option defaults to -# the old Squid behavior, which is better for hit ratios but -# worse for clients using IE, if they need to be able to -# force fresh content. -#Default: -# ie_refresh off - -# TAG: vary_ignore_expire on|off -# Many HTTP servers supporting Vary gives such objects -# immediate expiry time with no cache-control header -# when requested by a HTTP/1.0 client. This option -# enables Squid to ignore such expiry times until -# HTTP/1.1 is fully implemented. -# -# WARNING: If turned on this may eventually cause some -# varying objects not intended for caching to get cached. -#Default: -# vary_ignore_expire off - -# TAG: request_entities -# Squid defaults to deny GET and HEAD requests with request entities, -# as the meaning of such requests are undefined in the HTTP standard -# even if not explicitly forbidden. -# -# Set this directive to on if you have clients which insists -# on sending request entities in GET or HEAD requests. But be warned -# that there is server software (both proxies and web servers) which -# can fail to properly process this kind of request which may make you -# vulnerable to cache pollution attacks if enabled. -#Default: -# request_entities off - -# TAG: request_header_access -# Usage: request_header_access header_name allow|deny [!]aclname ... -# -# WARNING: Doing this VIOLATES the HTTP standard. Enabling -# this feature could make you liable for problems which it -# causes. -# -# This option replaces the old 'anonymize_headers' and the -# older 'http_anonymizer' option with something that is much -# more configurable. This new method creates a list of ACLs -# for each header, allowing you very fine-tuned header -# mangling. -# -# This option only applies to request headers, i.e., from the -# client to the server. -# -# You can only specify known headers for the header name. -# Other headers are reclassified as 'Other'. You can also -# refer to all the headers with 'All'. -# -# For example, to achieve the same behavior as the old -# 'http_anonymizer standard' option, you should use: -# -# request_header_access From deny all -# request_header_access Referer deny all -# request_header_access Server deny all -# request_header_access User-Agent deny all -# request_header_access WWW-Authenticate deny all -# request_header_access Link deny all -# -# Or, to reproduce the old 'http_anonymizer paranoid' feature -# you should use: -# -# request_header_access Allow allow all -# request_header_access Authorization allow all -# request_header_access WWW-Authenticate allow all -# request_header_access Proxy-Authorization allow all -# request_header_access Proxy-Authenticate allow all -# request_header_access Cache-Control allow all -# request_header_access Content-Encoding allow all -# request_header_access Content-Length allow all -# request_header_access Content-Type allow all -# request_header_access Date allow all -# request_header_access Expires allow all -# request_header_access Host allow all -# request_header_access If-Modified-Since allow all -# request_header_access Last-Modified allow all -# request_header_access Location allow all -# request_header_access Pragma allow all -# request_header_access Accept allow all -# request_header_access Accept-Charset allow all -# request_header_access Accept-Encoding allow all -# request_header_access Accept-Language allow all -# request_header_access Content-Language allow all -# request_header_access Mime-Version allow all -# request_header_access Retry-After allow all -# request_header_access Title allow all -# request_header_access Connection allow all -# request_header_access All deny all -# -# although many of those are HTTP reply headers, and so should be -# controlled with the reply_header_access directive. -# -# By default, all headers are allowed (no anonymizing is -# performed). -#Default: -# none - -# TAG: reply_header_access -# Usage: reply_header_access header_name allow|deny [!]aclname ... -# -# WARNING: Doing this VIOLATES the HTTP standard. Enabling -# this feature could make you liable for problems which it -# causes. -# -# This option only applies to reply headers, i.e., from the -# server to the client. -# -# This is the same as request_header_access, but in the other -# direction. -# -# This option replaces the old 'anonymize_headers' and the -# older 'http_anonymizer' option with something that is much -# more configurable. This new method creates a list of ACLs -# for each header, allowing you very fine-tuned header -# mangling. -# -# You can only specify known headers for the header name. -# Other headers are reclassified as 'Other'. You can also -# refer to all the headers with 'All'. -# -# For example, to achieve the same behavior as the old -# 'http_anonymizer standard' option, you should use: -# -# reply_header_access From deny all -# reply_header_access Referer deny all -# reply_header_access Server deny all -# reply_header_access User-Agent deny all -# reply_header_access WWW-Authenticate deny all -# reply_header_access Link deny all -# -# Or, to reproduce the old 'http_anonymizer paranoid' feature -# you should use: -# -# reply_header_access Allow allow all -# reply_header_access Authorization allow all -# reply_header_access WWW-Authenticate allow all -# reply_header_access Proxy-Authorization allow all -# reply_header_access Proxy-Authenticate allow all -# reply_header_access Cache-Control allow all -# reply_header_access Content-Encoding allow all -# reply_header_access Content-Length allow all -# reply_header_access Content-Type allow all -# reply_header_access Date allow all -# reply_header_access Expires allow all -# reply_header_access Host allow all -# reply_header_access If-Modified-Since allow all -# reply_header_access Last-Modified allow all -# reply_header_access Location allow all -# reply_header_access Pragma allow all -# reply_header_access Accept allow all -# reply_header_access Accept-Charset allow all -# reply_header_access Accept-Encoding allow all -# reply_header_access Accept-Language allow all -# reply_header_access Content-Language allow all -# reply_header_access Mime-Version allow all -# reply_header_access Retry-After allow all -# reply_header_access Title allow all -# reply_header_access Connection allow all -# reply_header_access All deny all -# -# although the HTTP request headers won't be usefully controlled -# by this directive -- see request_header_access for details. -# -# By default, all headers are allowed (no anonymizing is -# performed). -#Default: -# none - -# TAG: request_header_replace -# Usage: request_header_replace header_name message -# Example: request_header_replace User-Agent Nutscrape/1.0 (CP/M; 8-bit) -# -# This option allows you to change the contents of headers -# denied with request_header_access above, by replacing them -# with some fixed string. This replaces the old fake_user_agent -# option. -# -# This only applies to request headers, not reply headers. -# -# By default, headers are removed if denied. -#Default: -# none - -# TAG: reply_header_replace -# Usage: reply_header_replace header_name message -# Example: reply_header_replace Server Foo/1.0 -# -# This option allows you to change the contents of headers -# denied with reply_header_access above, by replacing them -# with some fixed string. -# -# This only applies to reply headers, not request headers. -# -# By default, headers are removed if denied. -#Default: -# none - -# TAG: relaxed_header_parser on|off|warn -# In the default "on" setting Squid accepts certain forms -# of non-compliant HTTP messages where it is unambiguous -# what the sending application intended even if the message -# is not correctly formatted. The messages is then normalized -# to the correct form when forwarded by Squid. -# -# If set to "warn" then a warning will be emitted in cache.log -# each time such HTTP error is encountered. -# -# If set to "off" then such HTTP errors will cause the request -# or response to be rejected. -#Default: -# relaxed_header_parser on - -# TAG: ignore_expect_100 on|off -# This option makes Squid ignore any Expect: 100-continue header present -# in the request. RFC 2616 requires that Squid being unable to satisfy -# the response expectation MUST return a 417 error. -# -# Note: Enabling this is a HTTP protocol violation, but some clients may -# not handle it well.. -#Default: -# ignore_expect_100 off - -# TIMEOUTS -# ----------------------------------------------------------------------------- - -# TAG: forward_timeout time-units -# This parameter specifies how long Squid should at most attempt in -# finding a forwarding path for the request before giving up. -#Default: -# forward_timeout 4 minutes - -# TAG: connect_timeout time-units -# This parameter specifies how long to wait for the TCP connect to -# the requested server or peer to complete before Squid should -# attempt to find another path where to forward the request. -#Default: -# connect_timeout 1 minute - -# TAG: peer_connect_timeout time-units -# This parameter specifies how long to wait for a pending TCP -# connection to a peer cache. The default is 30 seconds. You -# may also set different timeout values for individual neighbors -# with the 'connect-timeout' option on a 'cache_peer' line. -#Default: -# peer_connect_timeout 30 seconds - -# TAG: read_timeout time-units -# The read_timeout is applied on server-side connections. After -# each successful read(), the timeout will be extended by this -# amount. If no data is read again after this amount of time, -# the request is aborted and logged with ERR_READ_TIMEOUT. The -# default is 15 minutes. -#Default: -# read_timeout 15 minutes - -# TAG: request_timeout -# How long to wait for complete HTTP request headers after initial -# connection establishment. -#Default: -# request_timeout 5 minutes - -# TAG: persistent_request_timeout -# How long to wait for the next HTTP request on a persistent -# connection after the previous request completes. -#Default: -# persistent_request_timeout 2 minutes - -# TAG: client_lifetime time-units -# The maximum amount of time a client (browser) is allowed to -# remain connected to the cache process. This protects the Cache -# from having a lot of sockets (and hence file descriptors) tied up -# in a CLOSE_WAIT state from remote clients that go away without -# properly shutting down (either because of a network failure or -# because of a poor client implementation). The default is one -# day, 1440 minutes. -# -# NOTE: The default value is intended to be much larger than any -# client would ever need to be connected to your cache. You -# should probably change client_lifetime only as a last resort. -# If you seem to have many client connections tying up -# filedescriptors, we recommend first tuning the read_timeout, -# request_timeout, persistent_request_timeout and quick_abort values. -#Default: -# client_lifetime 1 day - -# TAG: half_closed_clients -# Some clients may shutdown the sending side of their TCP -# connections, while leaving their receiving sides open. Sometimes, -# Squid can not tell the difference between a half-closed and a -# fully-closed TCP connection. -# -# By default, Squid will immediately close client connections when -# read(2) returns "no more data to read." -# -# Change this option to 'on' and Squid will keep open connections -# until a read(2) or write(2) on the socket returns an error. -# This may show some benefits for reverse proxies. But if not -# it is recommended to leave OFF. -#Default: -# half_closed_clients off - -# TAG: pconn_timeout -# Timeout for idle persistent connections to servers and other -# proxies. -#Default: -# pconn_timeout 1 minute - -# TAG: ident_timeout -# Maximum time to wait for IDENT lookups to complete. -# -# If this is too high, and you enabled IDENT lookups from untrusted -# users, you might be susceptible to denial-of-service by having -# many ident requests going at once. -#Default: -# ident_timeout 10 seconds - -# TAG: shutdown_lifetime time-units -# When SIGTERM or SIGHUP is received, the cache is put into -# "shutdown pending" mode until all active sockets are closed. -# This value is the lifetime to set for all open descriptors -# during shutdown mode. Any active clients after this many -# seconds will receive a 'timeout' message. -#Default: -# shutdown_lifetime 30 seconds - -# ADMINISTRATIVE PARAMETERS -# ----------------------------------------------------------------------------- - -# TAG: cache_mgr -# Email-address of local cache manager who will receive -# mail if the cache dies. The default is "webmaster." -#Default: -# cache_mgr webmaster - -# TAG: mail_from -# From: email-address for mail sent when the cache dies. -# The default is to use 'appname@unique_hostname'. -# Default appname value is "squid", can be changed into -# src/globals.h before building squid. -#Default: -# none - -# TAG: mail_program -# Email program used to send mail if the cache dies. -# The default is "mail". The specified program must comply -# with the standard Unix mail syntax: -# mail-program recipient < mailfile -# -# Optional command line options can be specified. -#Default: -# mail_program mail - -# TAG: cache_effective_user -# If you start Squid as root, it will change its effective/real -# UID/GID to the user specified below. The default is to change -# to UID of proxy. -# see also; cache_effective_group -#Default: -# cache_effective_user proxy - -# TAG: cache_effective_group -# Squid sets the GID to the effective user's default group ID -# (taken from the password file) and supplementary group list -# from the groups membership. -# -# If you want Squid to run with a specific GID regardless of -# the group memberships of the effective user then set this -# to the group (or GID) you want Squid to run as. When set -# all other group privileges of the effective user are ignored -# and only this GID is effective. If Squid is not started as -# root the user starting Squid MUST be member of the specified -# group. -# -# This option is not recommended by the Squid Team. -# Our preference is for administrators to configure a secure -# user account for squid with UID/GID matching system policies. -#Default: -# none - -# TAG: httpd_suppress_version_string on|off -# Suppress Squid version string info in HTTP headers and HTML error pages. -#Default: -# httpd_suppress_version_string off - -# TAG: visible_hostname -# If you want to present a special hostname in error messages, etc, -# define this. Otherwise, the return value of gethostname() -# will be used. If you have multiple caches in a cluster and -# get errors about IP-forwarding you must set them to have individual -# names with this setting. -#Default: -# visible_hostname localhost - -# TAG: unique_hostname -# If you want to have multiple machines with the same -# 'visible_hostname' you must give each machine a different -# 'unique_hostname' so forwarding loops can be detected. -#Default: -# none - -# TAG: hostname_aliases -# A list of other DNS names your cache has. -#Default: -# none - -# TAG: umask -# Minimum umask which should be enforced while the proxy -# is running, in addition to the umask set at startup. -# -# For a traditional octal representation of umasks, start -# your value with 0. -#Default: -# umask 027 - -# OPTIONS FOR THE CACHE REGISTRATION SERVICE -# ----------------------------------------------------------------------------- -# -# This section contains parameters for the (optional) cache -# announcement service. This service is provided to help -# cache administrators locate one another in order to join or -# create cache hierarchies. -# -# An 'announcement' message is sent (via UDP) to the registration -# service by Squid. By default, the announcement message is NOT -# SENT unless you enable it with 'announce_period' below. -# -# The announcement message includes your hostname, plus the -# following information from this configuration file: -# -# http_port -# icp_port -# cache_mgr -# -# All current information is processed regularly and made -# available on the Web at http://www.ircache.net/Cache/Tracker/. - -# TAG: announce_period -# This is how frequently to send cache announcements. The -# default is `0' which disables sending the announcement -# messages. -# -# To enable announcing your cache, just set an announce period. -# -# Example: -# announce_period 1 day -#Default: -# announce_period 0 - -# TAG: announce_host -#Default: -# announce_host tracker.ircache.net - -# TAG: announce_file -#Default: -# none - -# TAG: announce_port -# announce_host and announce_port set the hostname and port -# number where the registration message will be sent. -# -# Hostname will default to 'tracker.ircache.net' and port will -# default default to 3131. If the 'filename' argument is given, -# the contents of that file will be included in the announce -# message. -#Default: -# announce_port 3131 - -# HTTPD-ACCELERATOR OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: httpd_accel_surrogate_id -# Surrogates (http://www.esi.org/architecture_spec_1.0.html) -# need an identification token to allow control targeting. Because -# a farm of surrogates may all perform the same tasks, they may share -# an identification token. -#Default: -# httpd_accel_surrogate_id unset-id - -# TAG: http_accel_surrogate_remote on|off -# Remote surrogates (such as those in a CDN) honour Surrogate-Control: no-store-remote. -# Set this to on to have squid behave as a remote surrogate. -#Default: -# http_accel_surrogate_remote off - -# TAG: esi_parser libxml2|expat|custom -# ESI markup is not strictly XML compatible. The custom ESI parser -# will give higher performance, but cannot handle non ASCII character -# encodings. -#Default: -# esi_parser custom - -# DELAY POOL PARAMETERS -# ----------------------------------------------------------------------------- - -# TAG: delay_pools -# This represents the number of delay pools to be used. For example, -# if you have one class 2 delay pool and one class 3 delays pool, you -# have a total of 2 delay pools. -#Default: -# delay_pools 0 - -# TAG: delay_class -# This defines the class of each delay pool. There must be exactly one -# delay_class line for each delay pool. For example, to define two -# delay pools, one of class 2 and one of class 3, the settings above -# and here would be: -# -# Example: -# delay_pools 4 # 4 delay pools -# delay_class 1 2 # pool 1 is a class 2 pool -# delay_class 2 3 # pool 2 is a class 3 pool -# delay_class 3 4 # pool 3 is a class 4 pool -# delay_class 4 5 # pool 4 is a class 5 pool -# -# The delay pool classes are: -# -# class 1 Everything is limited by a single aggregate -# bucket. -# -# class 2 Everything is limited by a single aggregate -# bucket as well as an "individual" bucket chosen -# from bits 25 through 32 of the IPv4 address. -# -# class 3 Everything is limited by a single aggregate -# bucket as well as a "network" bucket chosen -# from bits 17 through 24 of the IP address and a -# "individual" bucket chosen from bits 17 through -# 32 of the IPv4 address. -# -# class 4 Everything in a class 3 delay pool, with an -# additional limit on a per user basis. This -# only takes effect if the username is established -# in advance - by forcing authentication in your -# http_access rules. -# -# class 5 Requests are grouped according their tag (see -# external_acl's tag= reply). -# -# -# Each pool also requires a delay_parameters directive to configure the pool size -# and speed limits used whenever the pool is applied to a request. Along with -# a set of delay_access directives to determine when it is used. -# -# NOTE: If an IP address is a.b.c.d -# -> bits 25 through 32 are "d" -# -> bits 17 through 24 are "c" -# -> bits 17 through 32 are "c * 256 + d" -# -# NOTE-2: Due to the use of bitmasks in class 2,3,4 pools they only apply to -# IPv4 traffic. Class 1 and 5 pools may be used with IPv6 traffic. -#Default: -# none - -# TAG: delay_access -# This is used to determine which delay pool a request falls into. -# -# delay_access is sorted per pool and the matching starts with pool 1, -# then pool 2, ..., and finally pool N. The first delay pool where the -# request is allowed is selected for the request. If it does not allow -# the request to any pool then the request is not delayed (default). -# -# For example, if you want some_big_clients in delay -# pool 1 and lotsa_little_clients in delay pool 2: -# -#Example: -# delay_access 1 allow some_big_clients -# delay_access 1 deny all -# delay_access 2 allow lotsa_little_clients -# delay_access 2 deny all -# delay_access 3 allow authenticated_clients -#Default: -# none - -# TAG: delay_parameters -# This defines the parameters for a delay pool. Each delay pool has -# a number of "buckets" associated with it, as explained in the -# description of delay_class. -# -# For a class 1 delay pool, the syntax is: -# delay_pools pool 1 -# delay_parameters pool aggregate -# -# For a class 2 delay pool: -# delay_pools pool 2 -# delay_parameters pool aggregate individual -# -# For a class 3 delay pool: -# delay_pools pool 3 -# delay_parameters pool aggregate network individual -# -# For a class 4 delay pool: -# delay_pools pool 4 -# delay_parameters pool aggregate network individual user -# -# For a class 5 delay pool: -# delay_pools pool 5 -# delay_parameters pool tagrate -# -# The option variables are: -# -# pool a pool number - ie, a number between 1 and the -# number specified in delay_pools as used in -# delay_class lines. -# -# aggregate the speed limit parameters for the aggregate bucket -# (class 1, 2, 3). -# -# individual the speed limit parameters for the individual -# buckets (class 2, 3). -# -# network the speed limit parameters for the network buckets -# (class 3). -# -# user the speed limit parameters for the user buckets -# (class 4). -# -# tagrate the speed limit parameters for the tag buckets -# (class 5). -# -# A pair of delay parameters is written restore/maximum, where restore is -# the number of bytes (not bits - modem and network speeds are usually -# quoted in bits) per second placed into the bucket, and maximum is the -# maximum number of bytes which can be in the bucket at any time. -# -# There must be one delay_parameters line for each delay pool. -# -# -# For example, if delay pool number 1 is a class 2 delay pool as in the -# above example, and is being used to strictly limit each host to 64Kbit/sec -# (plus overheads), with no overall limit, the line is: -# -# delay_parameters 1 -1/-1 8000/8000 -# -# Note that 8 x 8000 KByte/sec -> 64Kbit/sec. -# -# Note that the figure -1 is used to represent "unlimited". -# -# -# And, if delay pool number 2 is a class 3 delay pool as in the above -# example, and you want to limit it to a total of 256Kbit/sec (strict limit) -# with each 8-bit network permitted 64Kbit/sec (strict limit) and each -# individual host permitted 4800bit/sec with a bucket maximum size of 64Kbits -# to permit a decent web page to be downloaded at a decent speed -# (if the network is not being limited due to overuse) but slow down -# large downloads more significantly: -# -# delay_parameters 2 32000/32000 8000/8000 600/8000 -# -# Note that 8 x 32000 KByte/sec -> 256Kbit/sec. -# 8 x 8000 KByte/sec -> 64Kbit/sec. -# 8 x 600 Byte/sec -> 4800bit/sec. -# -# -# Finally, for a class 4 delay pool as in the example - each user will -# be limited to 128Kbits/sec no matter how many workstations they are logged into.: -# -# delay_parameters 4 32000/32000 8000/8000 600/64000 16000/16000 -#Default: -# none - -# TAG: delay_initial_bucket_level (percent, 0-100) -# The initial bucket percentage is used to determine how much is put -# in each bucket when squid starts, is reconfigured, or first notices -# a host accessing it (in class 2 and class 3, individual hosts and -# networks only have buckets associated with them once they have been -# "seen" by squid). -#Default: -# delay_initial_bucket_level 50 - -# WCCPv1 AND WCCPv2 CONFIGURATION OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: wccp_router -# Use this option to define your WCCP ``home'' router for -# Squid. -# -# wccp_router supports a single WCCP(v1) router -# -# wccp2_router supports multiple WCCPv2 routers -# -# only one of the two may be used at the same time and defines -# which version of WCCP to use. -#Default: -# wccp_router any_addr - -# TAG: wccp2_router -# Use this option to define your WCCP ``home'' router for -# Squid. -# -# wccp_router supports a single WCCP(v1) router -# -# wccp2_router supports multiple WCCPv2 routers -# -# only one of the two may be used at the same time and defines -# which version of WCCP to use. -#Default: -# none - -# TAG: wccp_version -# This directive is only relevant if you need to set up WCCP(v1) -# to some very old and end-of-life Cisco routers. In all other -# setups it must be left unset or at the default setting. -# It defines an internal version in the WCCP(v1) protocol, -# with version 4 being the officially documented protocol. -# -# According to some users, Cisco IOS 11.2 and earlier only -# support WCCP version 3. If you're using that or an earlier -# version of IOS, you may need to change this value to 3, otherwise -# do not specify this parameter. -#Default: -# wccp_version 4 - -# TAG: wccp2_rebuild_wait -# If this is enabled Squid will wait for the cache dir rebuild to finish -# before sending the first wccp2 HereIAm packet -#Default: -# wccp2_rebuild_wait on - -# TAG: wccp2_forwarding_method -# WCCP2 allows the setting of forwarding methods between the -# router/switch and the cache. Valid values are as follows: -# -# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel) -# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting) -# -# Currently (as of IOS 12.4) cisco routers only support GRE. -# Cisco switches only support the L2 redirect assignment method. -#Default: -# wccp2_forwarding_method gre - -# TAG: wccp2_return_method -# WCCP2 allows the setting of return methods between the -# router/switch and the cache for packets that the cache -# decides not to handle. Valid values are as follows: -# -# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel) -# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting) -# -# Currently (as of IOS 12.4) cisco routers only support GRE. -# Cisco switches only support the L2 redirect assignment. -# -# If the "ip wccp redirect exclude in" command has been -# enabled on the cache interface, then it is still safe for -# the proxy server to use a l2 redirect method even if this -# option is set to GRE. -#Default: -# wccp2_return_method gre - -# TAG: wccp2_assignment_method -# WCCP2 allows the setting of methods to assign the WCCP hash -# Valid values are as follows: -# -# hash - Hash assignment -# mask - Mask assignment -# -# As a general rule, cisco routers support the hash assignment method -# and cisco switches support the mask assignment method. -#Default: -# wccp2_assignment_method hash - -# TAG: wccp2_service -# WCCP2 allows for multiple traffic services. There are two -# types: "standard" and "dynamic". The standard type defines -# one service id - http (id 0). The dynamic service ids can be from -# 51 to 255 inclusive. In order to use a dynamic service id -# one must define the type of traffic to be redirected; this is done -# using the wccp2_service_info option. -# -# The "standard" type does not require a wccp2_service_info option, -# just specifying the service id will suffice. -# -# MD5 service authentication can be enabled by adding -# "password=" to the end of this service declaration. -# -# Examples: -# -# wccp2_service standard 0 # for the 'web-cache' standard service -# wccp2_service dynamic 80 # a dynamic service type which will be -# # fleshed out with subsequent options. -# wccp2_service standard 0 password=foo -#Default: -# wccp2_service standard 0 - -# TAG: wccp2_service_info -# Dynamic WCCPv2 services require further information to define the -# traffic you wish to have diverted. -# -# The format is: -# -# wccp2_service_info protocol= flags=,.. -# priority= ports=,.. -# -# The relevant WCCPv2 flags: -# + src_ip_hash, dst_ip_hash -# + source_port_hash, dst_port_hash -# + src_ip_alt_hash, dst_ip_alt_hash -# + src_port_alt_hash, dst_port_alt_hash -# + ports_source -# -# The port list can be one to eight entries. -# -# Example: -# -# wccp2_service_info 80 protocol=tcp flags=src_ip_hash,ports_source -# priority=240 ports=80 -# -# Note: the service id must have been defined by a previous -# 'wccp2_service dynamic ' entry. -#Default: -# none - -# TAG: wccp2_weight -# Each cache server gets assigned a set of the destination -# hash proportional to their weight. -#Default: -# wccp2_weight 10000 - -# TAG: wccp_address -#Default: -# wccp_address 0.0.0.0 - -# TAG: wccp2_address -# Use this option if you require WCCP to use a specific -# interface address. -# -# The default behavior is to not bind to any specific address. -#Default: -# wccp2_address 0.0.0.0 - -# PERSISTENT CONNECTION HANDLING -# ----------------------------------------------------------------------------- -# -# Also see "pconn_timeout" in the TIMEOUTS section - -# TAG: client_persistent_connections -#Default: -# client_persistent_connections on - -# TAG: server_persistent_connections -# Persistent connection support for clients and servers. By -# default, Squid uses persistent connections (when allowed) -# with its clients and servers. You can use these options to -# disable persistent connections with clients and/or servers. -#Default: -# server_persistent_connections on - -# TAG: persistent_connection_after_error -# With this directive the use of persistent connections after -# HTTP errors can be disabled. Useful if you have clients -# who fail to handle errors on persistent connections proper. -#Default: -# persistent_connection_after_error on - -# TAG: detect_broken_pconn -# Some servers have been found to incorrectly signal the use -# of HTTP/1.0 persistent connections even on replies not -# compatible, causing significant delays. This server problem -# has mostly been seen on redirects. -# -# By enabling this directive Squid attempts to detect such -# broken replies and automatically assume the reply is finished -# after 10 seconds timeout. -#Default: -# detect_broken_pconn off - -# CACHE DIGEST OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: digest_generation -# This controls whether the server will generate a Cache Digest -# of its contents. By default, Cache Digest generation is -# enabled if Squid is compiled with --enable-cache-digests defined. -#Default: -# digest_generation on - -# TAG: digest_bits_per_entry -# This is the number of bits of the server's Cache Digest which -# will be associated with the Digest entry for a given HTTP -# Method and URL (public key) combination. The default is 5. -#Default: -# digest_bits_per_entry 5 - -# TAG: digest_rebuild_period (seconds) -# This is the wait time between Cache Digest rebuilds. -#Default: -# digest_rebuild_period 1 hour - -# TAG: digest_rewrite_period (seconds) -# This is the wait time between Cache Digest writes to -# disk. -#Default: -# digest_rewrite_period 1 hour - -# TAG: digest_swapout_chunk_size (bytes) -# This is the number of bytes of the Cache Digest to write to -# disk at a time. It defaults to 4096 bytes (4KB), the Squid -# default swap page. -#Default: -# digest_swapout_chunk_size 4096 bytes - -# TAG: digest_rebuild_chunk_percentage (percent, 0-100) -# This is the percentage of the Cache Digest to be scanned at a -# time. By default it is set to 10% of the Cache Digest. -#Default: -# digest_rebuild_chunk_percentage 10 - -# SNMP OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: snmp_port -# The port number where Squid listens for SNMP requests. To enable -# SNMP support set this to a suitable port number. Port number -# 3401 is often used for the Squid SNMP agent. By default it's -# set to "0" (disabled) -# -# Example: -# snmp_port 3401 -#Default: -# snmp_port 0 - -# TAG: snmp_access -# Allowing or denying access to the SNMP port. -# -# All access to the agent is denied by default. -# usage: -# -# snmp_access allow|deny [!]aclname ... -# -# This clause only supports fast acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -#Example: -# snmp_access allow snmppublic localhost -# snmp_access deny all -#Default: -# snmp_access deny all - -# TAG: snmp_incoming_address -#Default: -# snmp_incoming_address any_addr - -# TAG: snmp_outgoing_address -# Just like 'udp_incoming_address', but for the SNMP port. -# -# snmp_incoming_address is used for the SNMP socket receiving -# messages from SNMP agents. -# snmp_outgoing_address is used for SNMP packets returned to SNMP -# agents. -# -# The default snmp_incoming_address is to listen on all -# available network interfaces. -# -# If snmp_outgoing_address is not set it will use the same socket -# as snmp_incoming_address. Only change this if you want to have -# SNMP replies sent using another address than where this Squid -# listens for SNMP queries. -# -# NOTE, snmp_incoming_address and snmp_outgoing_address can not have -# the same value since they both use port 3401. -#Default: -# snmp_outgoing_address no_addr - -# ICP OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: icp_port -# The port number where Squid sends and receives ICP queries to -# and from neighbor caches. The standard UDP port for ICP is 3130. -# Default is disabled (0). -# -# Example: -# icp_port 3130 -#Default: -# icp_port 0 - -# TAG: htcp_port -# The port number where Squid sends and receives HTCP queries to -# and from neighbor caches. To turn it on you want to set it to -# 4827. By default it is set to "0" (disabled). -# -# Example: -# htcp_port 4827 -#Default: -# htcp_port 0 - -# TAG: log_icp_queries on|off -# If set, ICP queries are logged to access.log. You may wish -# do disable this if your ICP load is VERY high to speed things -# up or to simplify log analysis. -#Default: -# log_icp_queries on - -# TAG: udp_incoming_address -# udp_incoming_address is used for UDP packets received from other -# caches. -# -# The default behavior is to not bind to any specific address. -# -# Only change this if you want to have all UDP queries received on -# a specific interface/address. -# -# NOTE: udp_incoming_address is used by the ICP, HTCP, and DNS -# modules. Altering it will affect all of them in the same manner. -# -# see also; udp_outgoing_address -# -# NOTE, udp_incoming_address and udp_outgoing_address can not -# have the same value since they both use the same port. -#Default: -# udp_incoming_address any_addr - -# TAG: udp_outgoing_address -# udp_outgoing_address is used for UDP packets sent out to other -# caches. -# -# The default behavior is to not bind to any specific address. -# -# Instead it will use the same socket as udp_incoming_address. -# Only change this if you want to have UDP queries sent using another -# address than where this Squid listens for UDP queries from other -# caches. -# -# NOTE: udp_outgoing_address is used by the ICP, HTCP, and DNS -# modules. Altering it will affect all of them in the same manner. -# -# see also; udp_incoming_address -# -# NOTE, udp_incoming_address and udp_outgoing_address can not -# have the same value since they both use the same port. -#Default: -# udp_outgoing_address no_addr - -# TAG: icp_hit_stale on|off -# If you want to return ICP_HIT for stale cache objects, set this -# option to 'on'. If you have sibling relationships with caches -# in other administrative domains, this should be 'off'. If you only -# have sibling relationships with caches under your control, -# it is probably okay to set this to 'on'. -# If set to 'on', your siblings should use the option "allow-miss" -# on their cache_peer lines for connecting to you. -#Default: -# icp_hit_stale off - -# TAG: minimum_direct_hops -# If using the ICMP pinging stuff, do direct fetches for sites -# which are no more than this many hops away. -#Default: -# minimum_direct_hops 4 - -# TAG: minimum_direct_rtt -# If using the ICMP pinging stuff, do direct fetches for sites -# which are no more than this many rtt milliseconds away. -#Default: -# minimum_direct_rtt 400 - -# TAG: netdb_low -#Default: -# netdb_low 900 - -# TAG: netdb_high -# The low and high water marks for the ICMP measurement -# database. These are counts, not percents. The defaults are -# 900 and 1000. When the high water mark is reached, database -# entries will be deleted until the low mark is reached. -#Default: -# netdb_high 1000 - -# TAG: netdb_ping_period -# The minimum period for measuring a site. There will be at -# least this much delay between successive pings to the same -# network. The default is five minutes. -#Default: -# netdb_ping_period 5 minutes - -# TAG: query_icmp on|off -# If you want to ask your peers to include ICMP data in their ICP -# replies, enable this option. -# -# If your peer has configured Squid (during compilation) with -# '--enable-icmp' that peer will send ICMP pings to origin server -# sites of the URLs it receives. If you enable this option the -# ICP replies from that peer will include the ICMP data (if available). -# Then, when choosing a parent cache, Squid will choose the parent with -# the minimal RTT to the origin server. When this happens, the -# hierarchy field of the access.log will be -# "CLOSEST_PARENT_MISS". This option is off by default. -#Default: -# query_icmp off - -# TAG: test_reachability on|off -# When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH -# instead of ICP_MISS if the target host is NOT in the ICMP -# database, or has a zero RTT. -#Default: -# test_reachability off - -# TAG: icp_query_timeout (msec) -# Normally Squid will automatically determine an optimal ICP -# query timeout value based on the round-trip-time of recent ICP -# queries. If you want to override the value determined by -# Squid, set this 'icp_query_timeout' to a non-zero value. This -# value is specified in MILLISECONDS, so, to use a 2-second -# timeout (the old default), you would write: -# -# icp_query_timeout 2000 -#Default: -# icp_query_timeout 0 - -# TAG: maximum_icp_query_timeout (msec) -# Normally the ICP query timeout is determined dynamically. But -# sometimes it can lead to very large values (say 5 seconds). -# Use this option to put an upper limit on the dynamic timeout -# value. Do NOT use this option to always use a fixed (instead -# of a dynamic) timeout value. To set a fixed timeout see the -# 'icp_query_timeout' directive. -#Default: -# maximum_icp_query_timeout 2000 - -# TAG: minimum_icp_query_timeout (msec) -# Normally the ICP query timeout is determined dynamically. But -# sometimes it can lead to very small timeouts, even lower than -# the normal latency variance on your link due to traffic. -# Use this option to put an lower limit on the dynamic timeout -# value. Do NOT use this option to always use a fixed (instead -# of a dynamic) timeout value. To set a fixed timeout see the -# 'icp_query_timeout' directive. -#Default: -# minimum_icp_query_timeout 5 - -# TAG: background_ping_rate time-units -# Controls how often the ICP pings are sent to siblings that -# have background-ping set. -#Default: -# background_ping_rate 10 seconds - -# MULTICAST ICP OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: mcast_groups -# This tag specifies a list of multicast groups which your server -# should join to receive multicasted ICP queries. -# -# NOTE! Be very careful what you put here! Be sure you -# understand the difference between an ICP _query_ and an ICP -# _reply_. This option is to be set only if you want to RECEIVE -# multicast queries. Do NOT set this option to SEND multicast -# ICP (use cache_peer for that). ICP replies are always sent via -# unicast, so this option does not affect whether or not you will -# receive replies from multicast group members. -# -# You must be very careful to NOT use a multicast address which -# is already in use by another group of caches. -# -# If you are unsure about multicast, please read the Multicast -# chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/). -# -# Usage: mcast_groups 239.128.16.128 224.0.1.20 -# -# By default, Squid doesn't listen on any multicast groups. -#Default: -# none - -# TAG: mcast_miss_addr -# Note: This option is only available if Squid is rebuilt with the -# -DMULTICAST_MISS_STREAM define -# -# If you enable this option, every "cache miss" URL will -# be sent out on the specified multicast address. -# -# Do not enable this option unless you are are absolutely -# certain you understand what you are doing. -#Default: -# mcast_miss_addr no_addr - -# TAG: mcast_miss_ttl -# Note: This option is only available if Squid is rebuilt with the -# -DMULTICAST_MISS_STREAM define -# -# This is the time-to-live value for packets multicasted -# when multicasting off cache miss URLs is enabled. By -# default this is set to 'site scope', i.e. 16. -#Default: -# mcast_miss_ttl 16 - -# TAG: mcast_miss_port -# Note: This option is only available if Squid is rebuilt with the -# -DMULTICAST_MISS_STREAM define -# -# This is the port number to be used in conjunction with -# 'mcast_miss_addr'. -#Default: -# mcast_miss_port 3135 - -# TAG: mcast_miss_encode_key -# Note: This option is only available if Squid is rebuilt with the -# -DMULTICAST_MISS_STREAM define -# -# The URLs that are sent in the multicast miss stream are -# encrypted. This is the encryption key. -#Default: -# mcast_miss_encode_key XXXXXXXXXXXXXXXX - -# TAG: mcast_icp_query_timeout (msec) -# For multicast peers, Squid regularly sends out ICP "probes" to -# count how many other peers are listening on the given multicast -# address. This value specifies how long Squid should wait to -# count all the replies. The default is 2000 msec, or 2 -# seconds. -#Default: -# mcast_icp_query_timeout 2000 - -# INTERNAL ICON OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: icon_directory -# Where the icons are stored. These are normally kept in -# /usr/share/squid3/icons -#Default: -# icon_directory /usr/share/squid3/icons - -# TAG: global_internal_static -# This directive controls is Squid should intercept all requests for -# /squid-internal-static/ no matter which host the URL is requesting -# (default on setting), or if nothing special should be done for -# such URLs (off setting). The purpose of this directive is to make -# icons etc work better in complex cache hierarchies where it may -# not always be possible for all corners in the cache mesh to reach -# the server generating a directory listing. -#Default: -# global_internal_static on - -# TAG: short_icon_urls -# If this is enabled Squid will use short URLs for icons. -# If disabled it will revert to the old behavior of including -# it's own name and port in the URL. -# -# If you run a complex cache hierarchy with a mix of Squid and -# other proxies you may need to disable this directive. -#Default: -# short_icon_urls on - -# ERROR PAGE OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: error_directory -# If you wish to create your own versions of the default -# error files to customize them to suit your company copy -# the error/template files to another directory and point -# this tag at them. -# -# WARNING: This option will disable multi-language support -# on error pages if used. -# -# The squid developers are interested in making squid available in -# a wide variety of languages. If you are making translations for a -# language that Squid does not currently provide please consider -# contributing your translation back to the project. -# http://wiki.squid-cache.org/Translations -# -# The squid developers working on translations are happy to supply drop-in -# translated error files in exchange for any new language contributions. -#Default: -# none - -# TAG: error_default_language -# Set the default language which squid will send error pages in -# if no existing translation matches the clients language -# preferences. -# -# If unset (default) generic English will be used. -# -# The squid developers are interested in making squid available in -# a wide variety of languages. If you are interested in making -# translations for any language see the squid wiki for details. -# http://wiki.squid-cache.org/Translations -#Default: -# none - -# TAG: error_log_languages -# Log to cache.log what languages users are attempting to -# auto-negotiate for translations. -# -# Successful negotiations are not logged. Only failures -# have meaning to indicate that Squid may need an upgrade -# of its error page translations. -#Default: -# error_log_languages on - -# TAG: err_page_stylesheet -# CSS Stylesheet to pattern the display of Squid default error pages. -# -# For information on CSS see http://www.w3.org/Style/CSS/ -#Default: -# err_page_stylesheet /etc/squid3/errorpage.css - -# TAG: err_html_text -# HTML text to include in error messages. Make this a "mailto" -# URL to your admin address, or maybe just a link to your -# organizations Web page. -# -# To include this in your error messages, you must rewrite -# the error template files (found in the "errors" directory). -# Wherever you want the 'err_html_text' line to appear, -# insert a %L tag in the error template file. -#Default: -# none - -# TAG: email_err_data on|off -# If enabled, information about the occurred error will be -# included in the mailto links of the ERR pages (if %W is set) -# so that the email body contains the data. -# Syntax is %w -#Default: -# email_err_data on - -# TAG: deny_info -# Usage: deny_info err_page_name acl -# or deny_info http://... acl -# or deny_info TCP_RESET acl -# -# This can be used to return a ERR_ page for requests which -# do not pass the 'http_access' rules. Squid remembers the last -# acl it evaluated in http_access, and if a 'deny_info' line exists -# for that ACL Squid returns a corresponding error page. -# -# The acl is typically the last acl on the http_access deny line which -# denied access. The exceptions to this rule are: -# - When Squid needs to request authentication credentials. It's then -# the first authentication related acl encountered -# - When none of the http_access lines matches. It's then the last -# acl processed on the last http_access line. -# -# NP: If providing your own custom error pages with error_directory -# you may also specify them by your custom file name: -# Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys -# -# Alternatively you can specify an error URL. The browsers will -# get redirected (302 or 307) to the specified URL. %s in the redirection -# URL will be replaced by the requested URL. -# -# Alternatively you can tell Squid to reset the TCP connection -# by specifying TCP_RESET. -#Default: -# none - -# OPTIONS INFLUENCING REQUEST FORWARDING -# ----------------------------------------------------------------------------- - -# TAG: nonhierarchical_direct -# By default, Squid will send any non-hierarchical requests -# (matching hierarchy_stoplist or not cacheable request type) direct -# to origin servers. -# -# If you set this to off, Squid will prefer to send these -# requests to parents. -# -# Note that in most configurations, by turning this off you will only -# add latency to these request without any improvement in global hit -# ratio. -# -# If you are inside an firewall see never_direct instead of -# this directive. -#Default: -# nonhierarchical_direct on - -# TAG: prefer_direct -# Normally Squid tries to use parents for most requests. If you for some -# reason like it to first try going direct and only use a parent if -# going direct fails set this to on. -# -# By combining nonhierarchical_direct off and prefer_direct on you -# can set up Squid to use a parent as a backup path if going direct -# fails. -# -# Note: If you want Squid to use parents for all requests see -# the never_direct directive. prefer_direct only modifies how Squid -# acts on cacheable requests. -#Default: -# prefer_direct off - -# TAG: always_direct -# Usage: always_direct allow|deny [!]aclname ... -# -# Here you can use ACL elements to specify requests which should -# ALWAYS be forwarded by Squid to the origin servers without using -# any peers. For example, to always directly forward requests for -# local servers ignoring any parents or siblings you may have use -# something like: -# -# acl local-servers dstdomain my.domain.net -# always_direct allow local-servers -# -# To always forward FTP requests directly, use -# -# acl FTP proto FTP -# always_direct allow FTP -# -# NOTE: There is a similar, but opposite option named -# 'never_direct'. You need to be aware that "always_direct deny -# foo" is NOT the same thing as "never_direct allow foo". You -# may need to use a deny rule to exclude a more-specific case of -# some other rule. Example: -# -# acl local-external dstdomain external.foo.net -# acl local-servers dstdomain .foo.net -# always_direct deny local-external -# always_direct allow local-servers -# -# NOTE: If your goal is to make the client forward the request -# directly to the origin server bypassing Squid then this needs -# to be done in the client configuration. Squid configuration -# can only tell Squid how Squid should fetch the object. -# -# NOTE: This directive is not related to caching. The replies -# is cached as usual even if you use always_direct. To not cache -# the replies see the 'cache' directive. -# -# This clause supports both fast and slow acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -#Default: -# none - -# TAG: never_direct -# Usage: never_direct allow|deny [!]aclname ... -# -# never_direct is the opposite of always_direct. Please read -# the description for always_direct if you have not already. -# -# With 'never_direct' you can use ACL elements to specify -# requests which should NEVER be forwarded directly to origin -# servers. For example, to force the use of a proxy for all -# requests, except those in your local domain use something like: -# -# acl local-servers dstdomain .foo.net -# never_direct deny local-servers -# never_direct allow all -# -# or if Squid is inside a firewall and there are local intranet -# servers inside the firewall use something like: -# -# acl local-intranet dstdomain .foo.net -# acl local-external dstdomain external.foo.net -# always_direct deny local-external -# always_direct allow local-intranet -# never_direct allow all -# -# This clause supports both fast and slow acl types. -# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details. -#Default: -# none - -# ADVANCED NETWORKING OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: incoming_icp_average -#Default: -# incoming_icp_average 6 - -# TAG: incoming_http_average -#Default: -# incoming_http_average 4 - -# TAG: incoming_dns_average -#Default: -# incoming_dns_average 4 - -# TAG: min_icp_poll_cnt -#Default: -# min_icp_poll_cnt 8 - -# TAG: min_dns_poll_cnt -#Default: -# min_dns_poll_cnt 8 - -# TAG: min_http_poll_cnt -# Heavy voodoo here. I can't even believe you are reading this. -# Are you crazy? Don't even think about adjusting these unless -# you understand the algorithms in comm_select.c first! -#Default: -# min_http_poll_cnt 8 - -# TAG: accept_filter -# FreeBSD: -# -# The name of an accept(2) filter to install on Squid's -# listen socket(s). This feature is perhaps specific to -# FreeBSD and requires support in the kernel. -# -# The 'httpready' filter delays delivering new connections -# to Squid until a full HTTP request has been received. -# See the accf_http(9) man page for details. -# -# The 'dataready' filter delays delivering new connections -# to Squid until there is some data to process. -# See the accf_dataready(9) man page for details. -# -# Linux: -# -# The 'data' filter delays delivering of new connections -# to Squid until there is some data to process by TCP_ACCEPT_DEFER. -# You may optionally specify a number of seconds to wait by -# 'data=N' where N is the number of seconds. Defaults to 30 -# if not specified. See the tcp(7) man page for details. -#EXAMPLE: -## FreeBSD -#accept_filter httpready -## Linux -#accept_filter data -#Default: -# none - -# TAG: client_ip_max_connections -# Set an absolute limit on the number of connections a single -# client IP can use. Any more than this and Squid will begin to drop -# new connections from the client until it closes some links. -# -# Note that this is a global limit. It affects all HTTP, HTCP, Gopher and FTP -# connections from the client. For finer control use the ACL access controls. -# -# Requires client_db to be enabled (the default). -# -# WARNING: This may noticably slow down traffic received via external proxies -# or NAT devices and cause them to rebound error messages back to their clients. -#Default: -# client_ip_max_connections -1 - -# TAG: tcp_recv_bufsize (bytes) -# Size of receive buffer to set for TCP sockets. Probably just -# as easy to change your kernel's default. Set to zero to use -# the default buffer size. -#Default: -# tcp_recv_bufsize 0 bytes - -# ICAP OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: icap_enable on|off -# If you want to enable the ICAP module support, set this to on. -#Default: -# icap_enable off - -# TAG: icap_connect_timeout -# This parameter specifies how long to wait for the TCP connect to -# the requested ICAP server to complete before giving up and either -# terminating the HTTP transaction or bypassing the failure. -# -# The default for optional services is peer_connect_timeout. -# The default for essential services is connect_timeout. -# If this option is explicitly set, its value applies to all services. -#Default: -# none - -# TAG: icap_io_timeout time-units -# This parameter specifies how long to wait for an I/O activity on -# an established, active ICAP connection before giving up and -# either terminating the HTTP transaction or bypassing the -# failure. -# -# The default is read_timeout. -#Default: -# none - -# TAG: icap_service_failure_limit -# The limit specifies the number of failures that Squid tolerates -# when establishing a new TCP connection with an ICAP service. If -# the number of failures exceeds the limit, the ICAP service is -# not used for new ICAP requests until it is time to refresh its -# OPTIONS. The per-service failure counter is reset to zero each -# time Squid fetches new service OPTIONS. -# -# A negative value disables the limit. Without the limit, an ICAP -# service will not be considered down due to connectivity failures -# between ICAP OPTIONS requests. -#Default: -# icap_service_failure_limit 10 - -# TAG: icap_service_revival_delay -# The delay specifies the number of seconds to wait after an ICAP -# OPTIONS request failure before requesting the options again. The -# failed ICAP service is considered "down" until fresh OPTIONS are -# fetched. -# -# The actual delay cannot be smaller than the hardcoded minimum -# delay of 30 seconds. -#Default: -# icap_service_revival_delay 180 - -# TAG: icap_preview_enable on|off -# The ICAP Preview feature allows the ICAP server to handle the -# HTTP message by looking only at the beginning of the message body -# or even without receiving the body at all. In some environments, -# previews greatly speedup ICAP processing. -# -# During an ICAP OPTIONS transaction, the server may tell Squid what -# HTTP messages should be previewed and how big the preview should be. -# Squid will not use Preview if the server did not request one. -# -# To disable ICAP Preview for all ICAP services, regardless of -# individual ICAP server OPTIONS responses, set this option to "off". -#Example: -#icap_preview_enable off -#Default: -# icap_preview_enable on - -# TAG: icap_preview_size -# The default size of preview data to be sent to the ICAP server. -# -1 means no preview. This value might be overwritten on a per server -# basis by OPTIONS requests. -#Default: -# icap_preview_size -1 - -# TAG: icap_default_options_ttl -# The default TTL value for ICAP OPTIONS responses that don't have -# an Options-TTL header. -#Default: -# icap_default_options_ttl 60 - -# TAG: icap_persistent_connections on|off -# Whether or not Squid should use persistent connections to -# an ICAP server. -#Default: -# icap_persistent_connections on - -# TAG: icap_send_client_ip on|off -# If enabled, Squid shares HTTP client IP information with adaptation -# services. For ICAP, Squid adds the X-Client-IP header to ICAP requests. -# For eCAP, Squid sets the libecap::metaClientIp transaction option. -# -# See also: adaptation_uses_indirect_client -#Default: -# icap_send_client_ip off - -# TAG: icap_send_client_username on|off -# This sends authenticated HTTP client username (if available) to -# the ICAP service. The username value is encoded based on the -# icap_client_username_encode option and is sent using the header -# specified by the icap_client_username_header option. -#Default: -# icap_send_client_username off - -# TAG: icap_client_username_header -# ICAP request header name to use for send_client_username. -#Default: -# icap_client_username_header X-Client-Username - -# TAG: icap_client_username_encode on|off -# Whether to base64 encode the authenticated client username. -#Default: -# icap_client_username_encode off - -# TAG: icap_service -# Defines a single ICAP service using the following format: -# -# icap_service service_name vectoring_point [options] service_url -# -# service_name: ID -# an opaque identifier which must be unique in squid.conf -# -# vectoring_point: reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache -# This specifies at which point of transaction processing the -# ICAP service should be activated. *_postcache vectoring points -# are not yet supported. -# -# service_url: icap://servername:port/servicepath -# ICAP server and service location. -# -# ICAP does not allow a single service to handle both REQMOD and RESPMOD -# transactions. Squid does not enforce that requirement. You can specify -# services with the same service_url and different vectoring_points. You -# can even specify multiple identical services as long as their -# service_names differ. -# -# -# Service options are separated by white space. ICAP services support -# the following name=value options: -# -# bypass=on|off|1|0 -# If set to 'on' or '1', the ICAP service is treated as -# optional. If the service cannot be reached or malfunctions, -# Squid will try to ignore any errors and process the message as -# if the service was not enabled. No all ICAP errors can be -# bypassed. If set to 0, the ICAP service is treated as -# essential and all ICAP errors will result in an error page -# returned to the HTTP client. -# -# Bypass is off by default: services are treated as essential. -# -# routing=on|off|1|0 -# If set to 'on' or '1', the ICAP service is allowed to -# dynamically change the current message adaptation plan by -# returning a chain of services to be used next. The services -# are specified using the X-Next-Services ICAP response header -# value, formatted as a comma-separated list of service names. -# Each named service should be configured in squid.conf and -# should have the same method and vectoring point as the current -# ICAP transaction. Services violating these rules are ignored. -# An empty X-Next-Services value results in an empty plan which -# ends the current adaptation. -# -# Routing is not allowed by default: the ICAP X-Next-Services -# response header is ignored. -# -# ipv6=on|off -# Only has effect on split-stack systems. The default on those systems -# is to use IPv4-only connections. When set to 'on' this option will -# make Squid use IPv6-only connections to contact this ICAP service. -# -# Older icap_service format without optional named parameters is -# deprecated but supported for backward compatibility. -# -#Example: -#icap_service svcBlocker reqmod_precache bypass=0 icap://icap1.mydomain.net:1344/reqmod -#icap_service svcLogger reqmod_precache routing=on icap://icap2.mydomain.net:1344/respmod -#Default: -# none - -# TAG: icap_class -# This deprecated option was documented to define an ICAP service -# chain, even though it actually defined a set of similar, redundant -# services, and the chains were not supported. -# -# To define a set of redundant services, please use the -# adaptation_service_set directive. For service chains, use -# adaptation_service_chain. -#Default: -# none - -# TAG: icap_access -# This option is deprecated. Please use adaptation_access, which -# has the same ICAP functionality, but comes with better -# documentation, and eCAP support. -#Default: -# none - -# eCAP OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: ecap_enable on|off -# Note: This option is only available if Squid is rebuilt with the -# --enable-ecap option -# -# Controls whether eCAP support is enabled. -#Default: -# ecap_enable off - -# TAG: ecap_service -# Note: This option is only available if Squid is rebuilt with the -# --enable-ecap option -# -# Defines a single eCAP service -# -# ecap_service servicename vectoring_point bypass service_url -# -# vectoring_point = reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache -# This specifies at which point of transaction processing the -# eCAP service should be activated. *_postcache vectoring points -# are not yet supported. -# bypass = 1|0 -# If set to 1, the eCAP service is treated as optional. If the -# service cannot be reached or malfunctions, Squid will try to -# ignore any errors and process the message as if the service -# was not enabled. No all eCAP errors can be bypassed. -# If set to 0, the eCAP service is treated as essential and all -# eCAP errors will result in an error page returned to the -# HTTP client. -# service_url = ecap://vendor/service_name?custom&cgi=style¶meters=optional -# -#Example: -#ecap_service service_1 reqmod_precache 0 ecap://filters-R-us/leakDetector?on_error=block -#ecap_service service_2 respmod_precache 1 icap://filters-R-us/virusFilter?config=/etc/vf.cfg -#Default: -# none - -# TAG: loadable_modules -# Instructs Squid to load the specified dynamic module(s) or activate -# preloaded module(s). -#Example: -#loadable_modules /usr/lib/MinimalAdapter.so -#Default: -# none - -# MESSAGE ADAPTATION OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: adaptation_service_set -# -# Configures an ordered set of similar, redundant services. This is -# useful when hot standby or backup adaptation servers are available. -# -# adaptation_service_set set_name service_name1 service_name2 ... -# -# The named services are used in the set declaration order. The first -# applicable adaptation service from the set is used first. The next -# applicable service is tried if and only if the transaction with the -# previous service fails and the message waiting to be adapted is still -# intact. -# -# When adaptation starts, broken services are ignored as if they were -# not a part of the set. A broken service is a down optional service. -# -# The services in a set must be attached to the same vectoring point -# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD). -# -# If all services in a set are optional then adaptation failures are -# bypassable. If all services in the set are essential, then a -# transaction failure with one service may still be retried using -# another service from the set, but when all services fail, the master -# transaction fails as well. -# -# A set may contain a mix of optional and essential services, but that -# is likely to lead to surprising results because broken services become -# ignored (see above), making previously bypassable failures fatal. -# Technically, it is the bypassability of the last failed service that -# matters. -# -# See also: adaptation_access adaptation_service_chain -# -#Example: -#adaptation_service_set svcBlocker urlFilterPrimary urlFilterBackup -#adaptation service_set svcLogger loggerLocal loggerRemote -#Default: -# none - -# TAG: adaptation_service_chain -# -# Configures a list of complementary services that will be applied -# one-by-one, forming an adaptation chain or pipeline. This is useful -# when Squid must perform different adaptations on the same message. -# -# adaptation_service_chain chain_name service_name1 svc_name2 ... -# -# The named services are used in the chain declaration order. The first -# applicable adaptation service from the chain is used first. The next -# applicable service is applied to the successful adaptation results of -# the previous service in the chain. -# -# When adaptation starts, broken services are ignored as if they were -# not a part of the chain. A broken service is a down optional service. -# -# Request satisfaction terminates the adaptation chain because Squid -# does not currently allow declaration of RESPMOD services at the -# "reqmod_precache" vectoring point (see icap_service or ecap_service). -# -# The services in a chain must be attached to the same vectoring point -# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD). -# -# A chain may contain a mix of optional and essential services. If an -# essential adaptation fails (or the failure cannot be bypassed for -# other reasons), the master transaction fails. Otherwise, the failure -# is bypassed as if the failed adaptation service was not in the chain. -# -# See also: adaptation_access adaptation_service_set -# -#Example: -#adaptation_service_chain svcRequest requestLogger urlFilter leakDetector -#Default: -# none - -# TAG: adaptation_access -# Sends an HTTP transaction to an ICAP or eCAP adaptation service. -# -# adaptation_access service_name allow|deny [!]aclname... -# adaptation_access set_name allow|deny [!]aclname... -# -# At each supported vectoring point, the adaptation_access -# statements are processed in the order they appear in this -# configuration file. Statements pointing to the following services -# are ignored (i.e., skipped without checking their ACL): -# -# - services serving different vectoring points -# - "broken-but-bypassable" services -# - "up" services configured to ignore such transactions -# (e.g., based on the ICAP Transfer-Ignore header). -# -# When a set_name is used, all services in the set are checked -# using the same rules, to find the first applicable one. See -# adaptation_service_set for details. -# -# If an access list is checked and there is a match, the -# processing stops: For an "allow" rule, the corresponding -# adaptation service is used for the transaction. For a "deny" -# rule, no adaptation service is activated. -# -# It is currently not possible to apply more than one adaptation -# service at the same vectoring point to the same HTTP transaction. -# -# See also: icap_service and ecap_service -# -#Example: -#adaptation_access service_1 allow all -#Default: -# none - -# TAG: adaptation_service_iteration_limit -# Limits the number of iterations allowed when applying adaptation -# services to a message. If your longest adaptation set or chain -# may have more than 16 services, increase the limit beyond its -# default value of 16. If detecting infinite iteration loops sooner -# is critical, make the iteration limit match the actual number -# of services in your longest adaptation set or chain. -# -# Infinite adaptation loops are most likely with routing services. -# -# See also: icap_service routing=1 -#Default: -# adaptation_service_iteration_limit 16 - -# TAG: adaptation_masterx_shared_names -# For each master transaction (i.e., the HTTP request and response -# sequence, including all related ICAP and eCAP exchanges), Squid -# maintains a table of metadata. The table entries are (name, value) -# pairs shared among eCAP and ICAP exchanges. The table is destroyed -# with the master transaction. -# -# This option specifies the table entry names that Squid must accept -# from and forward to the adaptation transactions. -# -# An ICAP REQMOD or RESPMOD transaction may set an entry in the -# shared table by returning an ICAP header field with a name -# specified in adaptation_masterx_shared_names. Squid will store -# and forward that ICAP header field to subsequent ICAP -# transactions within the same master transaction scope. -# -# Only one shared entry name is supported at this time. -# -#Example: -## share authentication information among ICAP services -#adaptation_masterx_shared_names X-Subscriber-ID -#Default: -# none - -# TAG: icap_retry -# This ACL determines which retriable ICAP transactions are -# retried. Transactions that received a complete ICAP response -# and did not have to consume or produce HTTP bodies to receive -# that response are usually retriable. -# -# icap_retry allow|deny [!]aclname ... -# -# Squid automatically retries some ICAP I/O timeouts and errors -# due to persistent connection race conditions. -# -# See also: icap_retry_limit -#Default: -# icap_retry deny all - -# TAG: icap_retry_limit -# Limits the number of retries allowed. When set to zero (default), -# no retries are allowed. -# -# Communication errors due to persistent connection race -# conditions are unavoidable, automatically retried, and do not -# count against this limit. -# -# See also: icap_retry -#Default: -# icap_retry_limit 0 - -# DNS OPTIONS -# ----------------------------------------------------------------------------- - -# TAG: check_hostnames -# For security and stability reasons Squid can check -# hostnames for Internet standard RFC compliance. If you want -# Squid to perform these checks turn this directive on. -#Default: -# check_hostnames off - -# TAG: allow_underscore -# Underscore characters is not strictly allowed in Internet hostnames -# but nevertheless used by many sites. Set this to off if you want -# Squid to be strict about the standard. -# This check is performed only when check_hostnames is set to on. -#Default: -# allow_underscore on - -# TAG: cache_dns_program -# Note: This option is only available if Squid is rebuilt with the -# --disable-internal-dns option -# -# Specify the location of the executable for dnslookup process. -#Default: -# cache_dns_program /usr/lib/squid3/dnsserver - -# TAG: dns_children -# Note: This option is only available if Squid is rebuilt with the -# --disable-internal-dns option -# -# The number of processes spawn to service DNS name lookups. -# For heavily loaded caches on large servers, you should -# probably increase this value to at least 10. The maximum -# is 32. The default is 5. -# -# You must have at least one dnsserver process. -#Default: -# dns_children 5 - -# TAG: dns_retransmit_interval -# Initial retransmit interval for DNS queries. The interval is -# doubled each time all configured DNS servers have been tried. -# -#Default: -# dns_retransmit_interval 5 seconds - -# TAG: dns_timeout -# DNS Query timeout. If no response is received to a DNS query -# within this time all DNS servers for the queried domain -# are assumed to be unavailable. -#Default: -# dns_timeout 2 minutes - -# TAG: dns_defnames on|off -# Normally the RES_DEFNAMES resolver option is disabled -# (see res_init(3)). This prevents caches in a hierarchy -# from interpreting single-component hostnames locally. To allow -# Squid to handle single-component names, enable this option. -#Default: -# dns_defnames off - -# TAG: dns_nameservers -# Use this if you want to specify a list of DNS name servers -# (IP addresses) to use instead of those given in your -# /etc/resolv.conf file. -# On Windows platforms, if no value is specified here or in -# the /etc/resolv.conf file, the list of DNS name servers are -# taken from the Windows registry, both static and dynamic DHCP -# configurations are supported. -# -# Example: dns_nameservers 10.0.0.1 192.172.0.4 -#Default: -# none - -# TAG: hosts_file -# Location of the host-local IP name-address associations -# database. Most Operating Systems have such a file on different -# default locations: -# - Un*X & Linux: /etc/hosts -# - Windows NT/2000: %SystemRoot%\system32\drivers\etc\hosts -# (%SystemRoot% value install default is c:\winnt) -# - Windows XP/2003: %SystemRoot%\system32\drivers\etc\hosts -# (%SystemRoot% value install default is c:\windows) -# - Windows 9x/Me: %windir%\hosts -# (%windir% value is usually c:\windows) -# - Cygwin: /etc/hosts -# -# The file contains newline-separated definitions, in the -# form ip_address_in_dotted_form name [name ...] names are -# whitespace-separated. Lines beginning with an hash (#) -# character are comments. -# -# The file is checked at startup and upon configuration. -# If set to 'none', it won't be checked. -# If append_domain is used, that domain will be added to -# domain-local (i.e. not containing any dot character) host -# definitions. -#Default: -# hosts_file /etc/hosts - -# TAG: append_domain -# Appends local domain name to hostnames without any dots in -# them. append_domain must begin with a period. -# -# Be warned there are now Internet names with no dots in -# them using only top-domain names, so setting this may -# cause some Internet sites to become unavailable. -# -#Example: -# append_domain .yourdomain.com -#Default: -# none - -# TAG: ignore_unknown_nameservers -# By default Squid checks that DNS responses are received -# from the same IP addresses they are sent to. If they -# don't match, Squid ignores the response and writes a warning -# message to cache.log. You can allow responses from unknown -# nameservers by setting this option to 'off'. -#Default: -# ignore_unknown_nameservers on - -# TAG: dns_v4_fallback -# Standard practice with DNS is to lookup either A or AAAA records -# and use the results if it succeeds. Only looking up the other if -# the first attempt fails or otherwise produces no results. -# -# That policy however will cause squid to produce error pages for some -# servers that advertise AAAA but are unreachable over IPv6. -# -# If this is ON squid will always lookup both AAAA and A, using both. -# If this is OFF squid will lookup AAAA and only try A if none found. -# -# WARNING: There are some possibly unwanted side-effects with this on: -# *) Doubles the load placed by squid on the DNS network. -# *) May negatively impact connection delay times. -#Default: -# dns_v4_fallback on - -# TAG: dns_v4_first -# With the IPv6 Internet being as fast or faster than IPv4 Internet -# for most networks Squid prefers to contact websites over IPv6. -# -# This option reverses the order of preference to make Squid contact -# dual-stack websites over IPv4 first. Squid will still perform both -# IPv6 and IPv4 DNS lookups before connecting. -# -# WARNING: -# This option will restrict the situations under which IPv6 -# connectivity is used (and tested), potentially hiding network -# problem swhich would otherwise be detected and warned about. -#Default: -# dns_v4_first off - -# TAG: ipcache_size (number of entries) -#Default: -# ipcache_size 1024 - -# TAG: ipcache_low (percent) -#Default: -# ipcache_low 90 - -# TAG: ipcache_high (percent) -# The size, low-, and high-water marks for the IP cache. -#Default: -# ipcache_high 95 - -# TAG: fqdncache_size (number of entries) -# Maximum number of FQDN cache entries. -#Default: -# fqdncache_size 1024 - -# MISCELLANEOUS -# ----------------------------------------------------------------------------- - -# TAG: memory_pools on|off -# If set, Squid will keep pools of allocated (but unused) memory -# available for future use. If memory is a premium on your -# system and you believe your malloc library outperforms Squid -# routines, disable this. -#Default: -# memory_pools on - -# TAG: memory_pools_limit (bytes) -# Used only with memory_pools on: -# memory_pools_limit 50 MB -# -# If set to a non-zero value, Squid will keep at most the specified -# limit of allocated (but unused) memory in memory pools. All free() -# requests that exceed this limit will be handled by your malloc -# library. Squid does not pre-allocate any memory, just safe-keeps -# objects that otherwise would be free()d. Thus, it is safe to set -# memory_pools_limit to a reasonably high value even if your -# configuration will use less memory. -# -# If set to none, Squid will keep all memory it can. That is, there -# will be no limit on the total amount of memory used for safe-keeping. -# -# To disable memory allocation optimization, do not set -# memory_pools_limit to 0 or none. Set memory_pools to "off" instead. -# -# An overhead for maintaining memory pools is not taken into account -# when the limit is checked. This overhead is close to four bytes per -# object kept. However, pools may actually _save_ memory because of -# reduced memory thrashing in your malloc library. -#Default: -# memory_pools_limit 5 MB - -# TAG: forwarded_for on|off|transparent|truncate|delete -# If set to "on", Squid will append your client's IP address -# in the HTTP requests it forwards. By default it looks like: -# -# X-Forwarded-For: 192.1.2.3 -# -# If set to "off", it will appear as -# -# X-Forwarded-For: unknown -# -# If set to "transparent", Squid will not alter the -# X-Forwarded-For header in any way. -# -# If set to "delete", Squid will delete the entire -# X-Forwarded-For header. -# -# If set to "truncate", Squid will remove all existing -# X-Forwarded-For entries, and place itself as the sole entry. -#Default: -# forwarded_for on - -# TAG: cachemgr_passwd -# Specify passwords for cachemgr operations. -# -# Usage: cachemgr_passwd password action action ... -# -# Some valid actions are (see cache manager menu for a full list): -# 5min -# 60min -# asndb -# authenticator -# cbdata -# client_list -# comm_incoming -# config * -# counters -# delay -# digest_stats -# dns -# events -# filedescriptors -# fqdncache -# histograms -# http_headers -# info -# io -# ipcache -# mem -# menu -# netdb -# non_peers -# objects -# offline_toggle * -# pconn -# peer_select -# reconfigure * -# redirector -# refresh -# server_list -# shutdown * -# store_digest -# storedir -# utilization -# via_headers -# vm_objects -# -# * Indicates actions which will not be performed without a -# valid password, others can be performed if not listed here. -# -# To disable an action, set the password to "disable". -# To allow performing an action without a password, set the -# password to "none". -# -# Use the keyword "all" to set the same password for all actions. -# -#Example: -# cachemgr_passwd secret shutdown -# cachemgr_passwd lesssssssecret info stats/objects -# cachemgr_passwd disable all -#Default: -# none - -# TAG: client_db on|off -# If you want to disable collecting per-client statistics, -# turn off client_db here. -#Default: -# client_db on - -# TAG: refresh_all_ims on|off -# When you enable this option, squid will always check -# the origin server for an update when a client sends an -# If-Modified-Since request. Many browsers use IMS -# requests when the user requests a reload, and this -# ensures those clients receive the latest version. -# -# By default (off), squid may return a Not Modified response -# based on the age of the cached version. -#Default: -# refresh_all_ims off - -# TAG: reload_into_ims on|off -# When you enable this option, client no-cache or ``reload'' -# requests will be changed to If-Modified-Since requests. -# Doing this VIOLATES the HTTP standard. Enabling this -# feature could make you liable for problems which it -# causes. -# -# see also refresh_pattern for a more selective approach. -#Default: -# reload_into_ims off - -# TAG: maximum_single_addr_tries -# This sets the maximum number of connection attempts for a -# host that only has one address (for multiple-address hosts, -# each address is tried once). -# -# The default value is one attempt, the (not recommended) -# maximum is 255 tries. A warning message will be generated -# if it is set to a value greater than ten. -# -# Note: This is in addition to the request re-forwarding which -# takes place if Squid fails to get a satisfying response. -#Default: -# maximum_single_addr_tries 1 - -# TAG: retry_on_error -# If set to ON Squid will automatically retry requests when -# receiving an error response with status 403 (Forbidden), -# 500 (Internal Error), 501 or 503 (Service not available). -# Status 502 and 504 (Gateway errors) are always retried. -# -# This is mainly useful if you are in a complex cache hierarchy to -# work around access control errors. -# -# NOTE: This retry will attempt to find another working destination. -# Which is different from the server which just failed. -#Default: -# retry_on_error off - -# TAG: as_whois_server -# WHOIS server to query for AS numbers. NOTE: AS numbers are -# queried only when Squid starts up, not for every request. -#Default: -# as_whois_server whois.ra.net - -# TAG: offline_mode -# Enable this option and Squid will never try to validate cached -# objects. -#Default: -# offline_mode off - -# TAG: uri_whitespace -# What to do with requests that have whitespace characters in the -# URI. Options: -# -# strip: The whitespace characters are stripped out of the URL. -# This is the behavior recommended by RFC2396. -# deny: The request is denied. The user receives an "Invalid -# Request" message. -# allow: The request is allowed and the URI is not changed. The -# whitespace characters remain in the URI. Note the -# whitespace is passed to redirector processes if they -# are in use. -# encode: The request is allowed and the whitespace characters are -# encoded according to RFC1738. This could be considered -# a violation of the HTTP/1.1 -# RFC because proxies are not allowed to rewrite URI's. -# chop: The request is allowed and the URI is chopped at the -# first whitespace. This might also be considered a -# violation. -#Default: -# uri_whitespace strip - -# TAG: chroot -# Specifies a directory where Squid should do a chroot() while -# initializing. This also causes Squid to fully drop root -# privileges after initializing. This means, for example, if you -# use a HTTP port less than 1024 and try to reconfigure, you may -# get an error saying that Squid can not open the port. -#Default: -# none - -# TAG: balance_on_multiple_ip -# Modern IP resolvers in squid sort lookup results by preferred access. -# By default squid will use these IP in order and only rotates to -# the next listed when the most preffered fails. -# -# Some load balancing servers based on round robin DNS have been -# found not to preserve user session state across requests -# to different IP addresses. -# -# Enabling this directive Squid rotates IP's per request. -#Default: -# balance_on_multiple_ip off - -# TAG: pipeline_prefetch -# To boost the performance of pipelined requests to closer -# match that of a non-proxied environment Squid can try to fetch -# up to two requests in parallel from a pipeline. -# -# Defaults to off for bandwidth management and access logging -# reasons. -# -# WARNING: pipelining breaks NTLM and Negotiate/Kerberos authentication. -#Default: -# pipeline_prefetch off - -# TAG: high_response_time_warning (msec) -# If the one-minute median response time exceeds this value, -# Squid prints a WARNING with debug level 0 to get the -# administrators attention. The value is in milliseconds. -#Default: -# high_response_time_warning 0 - -# TAG: high_page_fault_warning -# If the one-minute average page fault rate exceeds this -# value, Squid prints a WARNING with debug level 0 to get -# the administrators attention. The value is in page faults -# per second. -#Default: -# high_page_fault_warning 0 - -# TAG: high_memory_warning -# If the memory usage (as determined by mallinfo) exceeds -# this amount, Squid prints a WARNING with debug level 0 to get -# the administrators attention. -#Default: -# high_memory_warning 0 KB - -# TAG: sleep_after_fork (microseconds) -# When this is set to a non-zero value, the main Squid process -# sleeps the specified number of microseconds after a fork() -# system call. This sleep may help the situation where your -# system reports fork() failures due to lack of (virtual) -# memory. Note, however, if you have a lot of child -# processes, these sleep delays will add up and your -# Squid will not service requests for some amount of time -# until all the child processes have been started. -# On Windows value less then 1000 (1 milliseconds) are -# rounded to 1000. -#Default: -# sleep_after_fork 0 - -# TAG: windows_ipaddrchangemonitor on|off -# On Windows Squid by default will monitor IP address changes and will -# reconfigure itself after any detected event. This is very useful for -# proxies connected to internet with dial-up interfaces. -# In some cases (a Proxy server acting as VPN gateway is one) it could be -# desiderable to disable this behaviour setting this to 'off'. -# Note: after changing this, Squid service must be restarted. -#Default: -# windows_ipaddrchangemonitor on - -# TAG: max_filedescriptors -# The maximum number of filedescriptors supported. -# -# The default "0" means Squid inherits the current ulimit setting. -# -# Note: Changing this requires a restart of Squid. Also -# not all comm loops supports large values. -#Default: -# max_filedescriptors 0 - -- cgit v1.2.3-70-g09d2