From a5d56e3b5443263b53b0487c81125123411bd0cf Mon Sep 17 00:00:00 2001 From: Philip Hands Date: Wed, 11 May 2016 17:11:01 +0200 Subject: move cucumber things under cucumber/ --- cucumber/features/step_definitions/common_steps.rb | 1086 ++++++++++++++++++++ 1 file changed, 1086 insertions(+) create mode 100644 cucumber/features/step_definitions/common_steps.rb (limited to 'cucumber/features/step_definitions/common_steps.rb') diff --git a/cucumber/features/step_definitions/common_steps.rb b/cucumber/features/step_definitions/common_steps.rb new file mode 100644 index 00000000..bd03cebb --- /dev/null +++ b/cucumber/features/step_definitions/common_steps.rb @@ -0,0 +1,1086 @@ +require 'fileutils' + +def post_vm_start_hook + # Sometimes the first click is lost (presumably it's used to give + # focus to virt-viewer or similar) so we do that now rather than + # having an important click lost. The point we click should be + # somewhere where no clickable elements generally reside. + @screen.click_point(@screen.w, @screen.h/2) +end + +def activate_filesystem_shares + # XXX-9p: First of all, filesystem shares cannot be mounted while we + # do a snapshot save+restore, so unmounting+remounting them seems + # like a good idea. However, the 9p modules get into a broken state + # during the save+restore, so we also would like to unload+reload + # them, but loading of 9pnet_virtio fails after a restore with + # "probe of virtio2 failed with error -2" (in dmesg) which makes the + # shares unavailable. Hence we leave this code commented for now. + #for mod in ["9pnet_virtio", "9p"] do + # $vm.execute("modprobe #{mod}") + #end + + $vm.list_shares.each do |share| + $vm.execute("mkdir -p #{share}") + $vm.execute("mount -t 9p -o trans=virtio #{share} #{share}") + end +end + +def context_menu_helper(top, bottom, menu_item) + try_for(60) do + t = @screen.wait(top, 10) + b = @screen.wait(bottom, 10) + # In Sikuli, lower x == closer to the left, lower y == closer to the top + assert(t.y < b.y) + center = Sikuli::Location.new(((t.x + t.w) + b.x)/2, + ((t.y + t.h) + b.y)/2) + @screen.right_click(center) + @screen.hide_cursor + @screen.wait_and_click(menu_item, 10) + return + end +end + +def deactivate_filesystem_shares + $vm.list_shares.each do |share| + $vm.execute("umount #{share}") + end + + # XXX-9p: See XXX-9p above + #for mod in ["9p", "9pnet_virtio"] do + # $vm.execute("modprobe -r #{mod}") + #end +end + +# This helper requires that the notification image is the one shown in +# the notification applet's list, not the notification pop-up. +def robust_notification_wait(notification_image, time_to_wait) + error_msg = "Didn't not manage to open the notification applet" + wait_start = Time.now + try_for(time_to_wait, :delay => 0, :msg => error_msg) do + @screen.hide_cursor + @screen.click("GnomeNotificationApplet.png") + @screen.wait("GnomeNotificationAppletOpened.png", 10) + end + + error_msg = "Didn't not see notification '#{notification_image}'" + time_to_wait -= (Time.now - wait_start).ceil + try_for(time_to_wait, :delay => 0, :msg => error_msg) do + found = false + entries = @screen.findAll("GnomeNotificationEntry.png") + while(entries.hasNext) do + entry = entries.next + @screen.hide_cursor + @screen.click(entry) + close_entry = @screen.wait("GnomeNotificationEntryClose.png", 10) + if @screen.exists(notification_image) + found = true + @screen.click(close_entry) + break + else + @screen.click(entry) + end + end + found + end + + # Click anywhere to close the notification applet + @screen.hide_cursor + @screen.click("GnomeApplicationsMenu.png") + @screen.hide_cursor +end + +def post_snapshot_restore_hook + $vm.wait_until_remote_shell_is_up + post_vm_start_hook + + # XXX-9p: See XXX-9p above + #activate_filesystem_shares + + # debian-TODO: move to tor feature + # The guest's Tor's circuits' states are likely to get out of sync + # with the other relays, so we ensure that we have fresh circuits. + # Time jumps and incorrect clocks also confuses Tor in many ways. + #if $vm.has_network? + # if $vm.execute("systemctl --quiet is-active tor@default.service").success? + # $vm.execute("systemctl stop tor@default.service") + # $vm.execute("rm -f /var/log/tor/log") + # $vm.execute("systemctl --no-block restart tails-tor-has-bootstrapped.target") + # $vm.host_to_guest_time_sync + # $vm.spawn("restart-tor") + # wait_until_tor_is_working + # if $vm.file_content('/proc/cmdline').include?(' i2p') + # $vm.execute_successfully('/usr/local/sbin/tails-i2p stop') + # # we "killall tails-i2p" to prevent multiple + # # copies of the script from running + # $vm.execute_successfully('killall tails-i2p') + # $vm.spawn('/usr/local/sbin/tails-i2p start') + # end + # end + #else + # $vm.host_to_guest_time_sync + #end +end + +Given /^a computer$/ do + $vm.destroy_and_undefine if $vm + $vm = VM.new($virt, VM_XML_PATH, $vmnet, $vmstorage, DISPLAY) +end + +Given /^the computer has (\d+) ([[:alpha:]]+) of RAM$/ do |size, unit| + $vm.set_ram_size(size, unit) +end + +Given /^the computer is set to boot from the Tails DVD$/ do + $vm.set_cdrom_boot(TAILS_ISO) +end + +Given /^the computer is set to boot from (.+?) drive "(.+?)"$/ do |type, name| + $vm.set_disk_boot(name, type.downcase) +end + +Given /^I (temporarily )?create a (\d+) ([[:alpha:]]+) disk named "([^"]+)"$/ do |temporary, size, unit, name| + $vm.storage.create_new_disk(name, {:size => size, :unit => unit, + :type => "qcow2"}) + add_after_scenario_hook { $vm.storage.delete_volume(name) } if temporary +end + +Given /^I plug (.+) drive "([^"]+)"$/ do |bus, name| + $vm.plug_drive(name, bus.downcase) + if $vm.is_running? + step "drive \"#{name}\" is detected by Tails" + end +end + +Then /^drive "([^"]+)" is detected by Tails$/ do |name| + raise "Tails is not running" unless $vm.is_running? + try_for(10, :msg => "Drive '#{name}' is not detected by Tails") do + $vm.disk_detected?(name) + end +end + +Given /^the network is plugged$/ do + $vm.plug_network +end + +Given /^the network is unplugged$/ do + $vm.unplug_network +end + +Given /^the hardware clock is set to "([^"]*)"$/ do |time| + $vm.set_hardware_clock(DateTime.parse(time).to_time) +end + +Given /^I capture all network traffic$/ do + @sniffer = Sniffer.new("sniffer", $vmnet) + @sniffer.capture + add_after_scenario_hook do + @sniffer.stop + @sniffer.clear + end +end + +Given /^I set Tails to boot with options "([^"]*)"$/ do |options| + @boot_options = options +end + +When /^I start the computer$/ do + assert(!$vm.is_running?, + "Trying to start a VM that is already running") + $vm.start + post_vm_start_hook +end + +Given /^I start Tails( from DVD)?( with network unplugged)?( and I login)?$/ do |dvd_boot, network_unplugged, do_login| + step "the computer is set to boot from the Tails DVD" if dvd_boot + if network_unplugged.nil? + step "the network is plugged" + else + step "the network is unplugged" + end + step "I start the computer" + step "the computer boots Tails" + if do_login + step "I log in to a new session" + step "Tails seems to have booted normally" + if network_unplugged.nil? + step "Tor is ready" + step "all notifications have disappeared" + step "available upgrades have been checked" + else + step "all notifications have disappeared" + end + end +end + +Given /^I start Tails from (.+?) drive "(.+?)"(| with network unplugged)( and I login(| with(| read-only) persistence enabled))?$/ do |drive_type, drive_name, network_unplugged, do_login, persistence_on, persistence_ro| + step "the computer is set to boot from #{drive_type} drive \"#{drive_name}\"" + if network_unplugged.empty? + step "the network is plugged" + else + step "the network is unplugged" + end + step "I start the computer" + step "the computer boots Tails" + if do_login + if ! persistence_on.empty? + if persistence_ro.empty? + step "I enable persistence" + else + step "I enable read-only persistence" + end + end + step "I log in to a new session" + step "Tails seems to have booted normally" + if network_unplugged.empty? + step "Tor is ready" + step "all notifications have disappeared" + step "available upgrades have been checked" + else + step "all notifications have disappeared" + end + end +end + +When /^I power off the computer$/ do + assert($vm.is_running?, + "Trying to power off an already powered off VM") + $vm.power_off +end + +When /^I cold reboot the computer$/ do + step "I power off the computer" + step "I start the computer" +end + +When /^I destroy the computer$/ do + $vm.destroy_and_undefine +end + +Given /^the computer (re)?boots DebianInstaller(|\d+)$/ do |reboot,version| + + boot_timeout = 30 + # We need some extra time for memory wiping if rebooting + + @screen.wait("d-i8_bootsplash.png", boot_timeout) + @screen.type(Sikuli::Key.TAB) + + @screen.type(' preseed/early_command="echo ttyS0::askfirst:-/bin/sh>>/etc/inittab;kill -HUP 1"' + " blacklist=psmouse #{@boot_options}" + + Sikuli::Key.ENTER) + $vm.wait_until_remote_shell_is_up +end + +Given /^I select British English$/ do + @screen.wait("DebianInstallerSelectLangEnglish.png", 30) + @screen.type(Sikuli::Key.ENTER) + @screen.wait("DebianInstallerCountrySelection.png", 10) + @screen.type(Sikuli::Key.UP) + @screen.waitVanish("DebianInstallerCountrySelection.png", 10) + @screen.type(Sikuli::Key.ENTER) + @screen.wait("DebianInstallerSelectLangEnglishUK.png", 10) + @screen.type(Sikuli::Key.ENTER) +end + +Given /^I accept the hostname, using "([^"]*)" as the domain$/ do |domain| + @screen.wait("DebianInstallerHostnamePrompt.png", 5*60) + @screen.type(Sikuli::Key.ENTER) + @screen.wait("DebianInstallerDomainPrompt.png", 10) + @screen.type(domain + Sikuli::Key.ENTER) + @screen.waitVanish("DebianInstallerDomainPrompt.png", 10) +end + +Given /^I set the root password to "([^"]*)"$/ do |rootpw| +# Root Password, twice + @screen.wait("DebianInstallerRootPassword.png", 30) + @screen.type(rootpw + Sikuli::Key.ENTER) + @screen.waitVanish("DebianInstallerRootPassword.png", 10) + @screen.type(rootpw + Sikuli::Key.ENTER) +end + +Given /^I set the password for "([^"]*)" to be "([^"]*)"$/ do |fullname,password| +# Username, and password twice + @screen.wait("DebianInstallerNameOfUser.png", 10) + @screen.type(fullname + Sikuli::Key.ENTER) + @screen.waitVanish("DebianInstallerNameOfUser.png", 10) + @screen.type(Sikuli::Key.ENTER) + @screen.wait("DebianInstallerUserPassword.png", 10) + @screen.type(password + Sikuli::Key.ENTER) + @screen.waitVanish("DebianInstallerUserPassword.png", 10) + @screen.type(password + Sikuli::Key.ENTER) +end + + #@screen.wait("DebianInstallerNoDiskFound.png", 60) + +Given /^I select full-disk, single-filesystem partitioning$/ do + @screen.wait("DebianInstallerPartitioningMethod.png", 60) + @screen.type(Sikuli::Key.ENTER) + @screen.wait("DebianInstallerSelectDiskToPartition.png", 10) + @screen.type(Sikuli::Key.ENTER) + @screen.wait("DebianInstallerPartitioningScheme.png", 10) + @screen.type(Sikuli::Key.ENTER) + @screen.wait("d-i_FinishPartitioning.png", 10) + sleep(5) # FIXME -- why do we need this? It's weird that the wait is not enough + @screen.type(Sikuli::Key.ENTER) + # prompt about Writing Partitions to disk: + @screen.wait("d-i_No.png", 10) + @screen.type(Sikuli::Key.TAB) + @screen.wait("d-i_Yes.png", 10) + @screen.type(Sikuli::Key.ENTER) +end + +Given /^I note that the Base system is being installed$/ do + @screen.wait("DebianInstallerInstallingBaseSystem.png", 30) + @screen.waitVanish("DebianInstallerInstallingBaseSystem.png", 15 * 60) +end + +Given /^I accept the default mirror$/ do + @screen.wait("DebianInstallerMirrorCountry.png", 10 * 60) + @screen.type(Sikuli::Key.ENTER) + @screen.wait("d-i_ArchiveMirror.png", 5) + @screen.type(Sikuli::Key.ENTER) + @screen.wait("d-i_HttpProxy.png", 5) + @screen.type(Sikuli::Key.ENTER) +end + +Given /^I neglect to scan more CDs$/ do + @screen.wait("d-i_ScanCD.png", 15 * 60) + @screen.type(Sikuli::Key.ENTER) + @screen.wait("d-i_UseNetMirror.png", 10) + @screen.wait("d-i_Yes.png", 10) + @screen.type(Sikuli::Key.TAB) + @screen.wait("d-i_No.png", 10) + @screen.type(Sikuli::Key.ENTER) +end + +Given /^I ignore Popcon$/ do + #@screen.wait("d-i_popcon.png", 10 * 60) + @screen.wait("d-i_No.png", 10 * 60) + @screen.type(Sikuli::Key.ENTER) +end + +Given /^we reach the Tasksel prompt$/ do + @screen.wait("d-i_ChooseSoftware.png", 5 * 60) +end + +Given /^I hit ENTER$/ do + @screen.type(Sikuli::Key.ENTER) +end + +Given /^I select the Desktop task$/ do + @screen.wait("d-i_ChooseSoftware.png", 10) + @screen.type(Sikuli::Key.SPACE) + @screen.type(Sikuli::Key.DOWN) + @screen.type(Sikuli::Key.SPACE) + @screen.wait("d-i_DesktopTask_Yes.png", 10) + @screen.type(Sikuli::Key.ENTER) +end + +Given /^I install GRUB$/ do + @screen.wait("d-i_InstallGRUB.png", 80 * 60) + #@screen.wait("Install the GRUB", 80 * 60) + @screen.type(Sikuli::Key.ENTER) + @screen.wait("d-i_GRUBEnterDev.png", 10 * 60) + @screen.type(Sikuli::Key.DOWN) + @screen.wait("d-i_GRUBdev.png", 10) + @screen.type(Sikuli::Key.ENTER) +end + +Given /^I allow reboot after the install is complete$/ do + @screen.wait("d-i_InstallComplete.png", 2 * 60) + @screen.type(Sikuli::Key.ENTER) +end + +Given /^I wait for the reboot$/ do + @screen.wait(bootsplash, 10 * 60) +end + +Given /^I make sure that we boot from disk$/ do + @screen.wait("d-i_GRUB_Debian.png", 5 * 60) +end + +Given /^I wait for a Login Prompt$/ do + @screen.wait("DebianLoginPromptVT.png", 2 * 60) +end + +def bootsplash + case @os_loader + when "UEFI" + 'TailsBootSplashUEFI.png' + else + 'd-i8_bootsplash.png' + end +end + +def bootsplash_tab_msg + case @os_loader + when "UEFI" + 'TailsBootSplashTabMsgUEFI.png' + else + #if reboot + # bootsplash = 'TailsBootSplashPostReset.png' + # bootsplash_tab_msg = 'TailsBootSplashTabMsgPostReset.png' + # boot_timeout = 120 + #else + #bootsplash = "DebianLive#{version}BootSplash.png" + bootsplash = "DebianLiveBootSplash.png" + bootsplash_tab_msg = "DebianLiveBootSplashTabMsg.png" + boot_timeout = 30 + #end + end +end + +Given /^the computer (re)?boots Tails$/ do |reboot| + + boot_timeout = 30 + # We need some extra time for memory wiping if rebooting + boot_timeout += 90 if reboot + + @screen.wait(bootsplash, boot_timeout) + @screen.wait(bootsplash_tab_msg, 10) + @screen.type(Sikuli::Key.TAB) + @screen.waitVanish(bootsplash_tab_msg, 1) + + @screen.type(" autotest_never_use_this_option blacklist=psmouse #{@boot_options}" + + Sikuli::Key.ENTER) + @screen.wait("DebianLive#{version}Greeter.png", 5*60) + @vm.wait_until_remote_shell_is_up + activate_filesystem_shares +end + +Given /^I log in to a new session(?: in )?(|German)$/ do |lang| + case lang + when 'German' + @language = "German" + @screen.wait_and_click('TailsGreeterLanguage.png', 10) + @screen.wait_and_click("TailsGreeterLanguage#{@language}.png", 10) + @screen.wait_and_click("TailsGreeterLoginButton#{@language}.png", 10) + when '' + @screen.wait_and_click('TailsGreeterLoginButton.png', 10) + else + raise "Unsupported language: #{lang}" + end +end + +Given /^I set sudo password "([^"]*)"$/ do |password| + @sudo_password = password + next if @skip_steps_while_restoring_background + #@screen.wait("TailsGreeterAdminPassword.png", 20) + @screen.type(@sudo_password) + @screen.type(Sikuli::Key.TAB) + @screen.type(@sudo_password) +end + +Given /^Tails Greeter has dealt with the sudo password$/ do + f1 = "/etc/sudoers.d/tails-greeter" + f2 = "#{f1}-no-password-lecture" + try_for(20) { + $vm.execute("test -e '#{f1}' -o -e '#{f2}'").success? + } +end + +Given /^the Tails desktop is ready$/ do + desktop_started_picture = "GnomeApplicationsMenu#{@language}.png" + # We wait for the Florence icon to be displayed to ensure reliable systray icon clicking. + @screen.wait("GnomeSystrayFlorence.png", 180) + @screen.wait(desktop_started_picture, 180) + # Disable screen blanking since we sometimes need to wait long + # enough for it to activate, which can mess with Sikuli wait():ing + # for some image. + $vm.execute_successfully( + 'gsettings set org.gnome.desktop.session idle-delay 0', + :user => LIVE_USER + ) +end + +Then /^Tails seems to have booted normally$/ do + step "the Tails desktop is ready" +end + +When /^I see the 'Tor is ready' notification$/ do + robust_notification_wait('TorIsReadyNotification.png', 300) +end + +Given /^Tor is ready$/ do + step "Tor has built a circuit" + step "the time has synced" + if $vm.execute('systemctl is-system-running').failure? + units_status = $vm.execute('systemctl').stdout + raise "At least one system service failed to start:\n#{units_status}" + end +end + +Given /^Tor has built a circuit$/ do + wait_until_tor_is_working +end + +Given /^the time has synced$/ do + ["/var/run/tordate/done", "/var/run/htpdate/success"].each do |file| + try_for(300) { $vm.execute("test -e #{file}").success? } + end +end + +Given /^available upgrades have been checked$/ do + try_for(300) { + $vm.execute("test -e '/var/run/tails-upgrader/checked_upgrades'").success? + } +end + +Given /^the Tor Browser has started$/ do + tor_browser_picture = "TorBrowserWindow.png" + @screen.wait(tor_browser_picture, 60) +end + +Given /^the Tor Browser (?:has started and )?load(?:ed|s) the (startup page|Tails roadmap)$/ do |page| + case page + when "startup page" + picture = "TorBrowserStartupPage.png" + when "Tails roadmap" + picture = "TorBrowserTailsRoadmap.png" + else + raise "Unsupported page: #{page}" + end + step "the Tor Browser has started" + @screen.wait(picture, 120) +end + +Given /^the Tor Browser has started in offline mode$/ do + @screen.wait("TorBrowserOffline.png", 60) +end + +Given /^I add a bookmark to eff.org in the Tor Browser$/ do + url = "https://www.eff.org" + step "I open the address \"#{url}\" in the Tor Browser" + @screen.wait("TorBrowserOffline.png", 5) + @screen.type("d", Sikuli::KeyModifier.CTRL) + @screen.wait("TorBrowserBookmarkPrompt.png", 10) + @screen.type(url + Sikuli::Key.ENTER) +end + +Given /^the Tor Browser has a bookmark to eff.org$/ do + @screen.type("b", Sikuli::KeyModifier.ALT) + @screen.wait("TorBrowserEFFBookmark.png", 10) +end + +Given /^all notifications have disappeared$/ do + next if not(@screen.exists("GnomeNotificationApplet.png")) + @screen.click("GnomeNotificationApplet.png") + @screen.wait("GnomeNotificationAppletOpened.png", 10) + begin + entries = @screen.findAll("GnomeNotificationEntry.png") + while(entries.hasNext) do + entry = entries.next + @screen.hide_cursor + @screen.click(entry) + @screen.wait_and_click("GnomeNotificationEntryClose.png", 10) + end + rescue FindFailed + # No notifications, so we're good to go. + end + @screen.hide_cursor + # Click anywhere to close the notification applet + @screen.click("GnomeApplicationsMenu.png") + @screen.hide_cursor +end + +Then /^I (do not )?see "([^"]*)" after at most (\d+) seconds$/ do |negation, image, time| + begin + @screen.wait(image, time.to_i) + raise "found '#{image}' while expecting not to" if negation + rescue FindFailed => e + raise e if not(negation) + end +end + +Then /^all Internet traffic has only flowed through Tor$/ do + leaks = FirewallLeakCheck.new(@sniffer.pcap_file, + :accepted_hosts => get_all_tor_nodes) + leaks.assert_no_leaks +end + +Given /^I enter the sudo password in the pkexec prompt$/ do + step "I enter the \"#{@sudo_password}\" password in the pkexec prompt" +end + +def deal_with_polkit_prompt (image, password) + @screen.wait(image, 60) + @screen.type(password) + @screen.type(Sikuli::Key.ENTER) + @screen.waitVanish(image, 10) +end + +Given /^I enter the "([^"]*)" password in the pkexec prompt$/ do |password| + deal_with_polkit_prompt('PolicyKitAuthPrompt.png', password) +end + +Given /^process "([^"]+)" is (not )?running$/ do |process, not_running| + if not_running + assert(!$vm.has_process?(process), "Process '#{process}' is running") + else + assert($vm.has_process?(process), "Process '#{process}' is not running") + end +end + +Given /^process "([^"]+)" is running within (\d+) seconds$/ do |process, time| + try_for(time.to_i, :msg => "Process '#{process}' is not running after " + + "waiting for #{time} seconds") do + $vm.has_process?(process) + end +end + +Given /^process "([^"]+)" has stopped running after at most (\d+) seconds$/ do |process, time| + try_for(time.to_i, :msg => "Process '#{process}' is still running after " + + "waiting for #{time} seconds") do + not $vm.has_process?(process) + end +end + +Given /^I kill the process "([^"]+)"$/ do |process| + $vm.execute("killall #{process}") + try_for(10, :msg => "Process '#{process}' could not be killed") { + !$vm.has_process?(process) + } +end + +Then /^Tails eventually shuts down$/ do + nr_gibs_of_ram = convert_from_bytes($vm.get_ram_size_in_bytes, 'GiB').ceil + timeout = nr_gibs_of_ram*5*60 + try_for(timeout, :msg => "VM is still running after #{timeout} seconds") do + ! $vm.is_running? + end +end + +Then /^Tails eventually restarts$/ do + nr_gibs_of_ram = convert_from_bytes($vm.get_ram_size_in_bytes, 'GiB').ceil + @screen.wait('TailsBootSplash.png', nr_gibs_of_ram*5*60) +end + +Given /^I shutdown Tails and wait for the computer to power off$/ do + $vm.spawn("poweroff") + step 'Tails eventually shuts down' +end + +When /^I request a shutdown using the emergency shutdown applet$/ do + @screen.hide_cursor + @screen.wait_and_click('TailsEmergencyShutdownButton.png', 10) + @screen.wait_and_click('TailsEmergencyShutdownHalt.png', 10) +end + +When /^I warm reboot the computer$/ do + $vm.spawn("reboot") +end + +When /^I request a reboot using the emergency shutdown applet$/ do + @screen.hide_cursor + @screen.wait_and_click('TailsEmergencyShutdownButton.png', 10) + @screen.wait_and_click('TailsEmergencyShutdownReboot.png', 10) +end + +Given /^package "([^"]+)" is installed$/ do |package| + assert($vm.execute("dpkg -s '#{package}' 2>/dev/null | grep -qs '^Status:.*installed$'").success?, + "Package '#{package}' is not installed") +end + +When /^I start the Tor Browser$/ do + step 'I start "TorBrowser" via the GNOME "Internet" applications menu' +end + +When /^I request a new identity using Torbutton$/ do + @screen.wait_and_click('TorButtonIcon.png', 30) + @screen.wait_and_click('TorButtonNewIdentity.png', 30) +end + +When /^I acknowledge Torbutton's New Identity confirmation prompt$/ do + @screen.wait('GnomeQuestionDialogIcon.png', 30) + step 'I type "y"' +end + +When /^I start the Tor Browser in offline mode$/ do + step "I start the Tor Browser" + @screen.wait_and_click("TorBrowserOfflinePrompt.png", 10) + @screen.click("TorBrowserOfflinePromptStart.png") +end + +Given /^I add a wired DHCP NetworkManager connection called "([^"]+)"$/ do |con_name| + con_content = <> /tmp/NM.#{con_name}") + end + con_file = "/etc/NetworkManager/system-connections/#{con_name}" + $vm.execute("install -m 0600 '/tmp/NM.#{con_name}' '#{con_file}'") + $vm.execute_successfully("nmcli connection load '#{con_file}'") + try_for(10) { + nm_con_list = $vm.execute("nmcli --terse --fields NAME connection show").stdout + nm_con_list.split("\n").include? "#{con_name}" + } +end + +Given /^I switch to the "([^"]+)" NetworkManager connection$/ do |con_name| + $vm.execute("nmcli connection up id #{con_name}") + try_for(60) do + $vm.execute("nmcli --terse --fields NAME,STATE connection show").stdout.chomp.split("\n").include?("#{con_name}:activated") + end +end + +When /^I start and focus GNOME Terminal$/ do + step 'I start "Terminal" via the GNOME "Utilities" applications menu' + @screen.wait('GnomeTerminalWindow.png', 20) +end + +When /^I run "([^"]+)" in GNOME Terminal$/ do |command| + if !$vm.has_process?("gnome-terminal-server") + step "I start and focus GNOME Terminal" + else + @screen.wait_and_click('GnomeTerminalWindow.png', 20) + end + @screen.type(command + Sikuli::Key.ENTER) +end + +When /^the file "([^"]+)" exists(?:| after at most (\d+) seconds)$/ do |file, timeout| + timeout = 0 if timeout.nil? + try_for( + timeout.to_i, + :msg => "The file #{file} does not exist after #{timeout} seconds" + ) { + $vm.file_exist?(file) + } +end + +When /^the file "([^"]+)" does not exist$/ do |file| + assert(! ($vm.file_exist?(file))) +end + +When /^the directory "([^"]+)" exists$/ do |directory| + assert($vm.directory_exist?(directory)) +end + +When /^the directory "([^"]+)" does not exist$/ do |directory| + assert(! ($vm.directory_exist?(directory))) +end + +When /^I copy "([^"]+)" to "([^"]+)" as user "([^"]+)"$/ do |source, destination, user| + c = $vm.execute("cp \"#{source}\" \"#{destination}\"", :user => LIVE_USER) + assert(c.success?, "Failed to copy file:\n#{c.stdout}\n#{c.stderr}") +end + +def is_persistent?(app) + conf = get_persistence_presets(true)["#{app}"] + c = $vm.execute("findmnt --noheadings --output SOURCE --target '#{conf}'") + # This check assumes that we haven't enabled read-only persistence. + c.success? and c.stdout.chomp != "aufs" +end + +Then /^persistence for "([^"]+)" is (|not )enabled$/ do |app, enabled| + case enabled + when '' + assert(is_persistent?(app), "Persistence should be enabled.") + when 'not ' + assert(!is_persistent?(app), "Persistence should not be enabled.") + end +end + +def gnome_app_menu_click_helper(click_me, verify_me = nil) + try_for(30) do + @screen.hide_cursor + # The sensitivity for submenus to open by just hovering past them + # is extremely high, and may result in the wrong one + # opening. Hence we better avoid hovering over undesired submenus + # entirely by "approaching" the menu strictly horizontally. + r = @screen.wait(click_me, 10) + @screen.hover_point(@screen.w, r.getY) + @screen.click(r) + @screen.wait(verify_me, 10) if verify_me + return + end +end + +Given /^I start "([^"]+)" via the GNOME "([^"]+)" applications menu$/ do |app, submenu| + menu_button = "GnomeApplicationsMenu.png" + sub_menu_entry = "GnomeApplications" + submenu + ".png" + application_entry = "GnomeApplications" + app + ".png" + try_for(120) do + begin + gnome_app_menu_click_helper(menu_button, sub_menu_entry) + gnome_app_menu_click_helper(sub_menu_entry, application_entry) + gnome_app_menu_click_helper(application_entry) + rescue Exception => e + # Close menu, if still open + @screen.type(Sikuli::Key.ESC) + raise e + end + true + end +end + +Given /^I start "([^"]+)" via the GNOME "([^"]+)"\/"([^"]+)" applications menu$/ do |app, submenu, subsubmenu| + menu_button = "GnomeApplicationsMenu.png" + sub_menu_entry = "GnomeApplications" + submenu + ".png" + sub_sub_menu_entry = "GnomeApplications" + subsubmenu + ".png" + application_entry = "GnomeApplications" + app + ".png" + try_for(120) do + begin + gnome_app_menu_click_helper(menu_button, sub_menu_entry) + gnome_app_menu_click_helper(sub_menu_entry, sub_sub_menu_entry) + gnome_app_menu_click_helper(sub_sub_menu_entry, application_entry) + gnome_app_menu_click_helper(application_entry) + rescue Exception => e + # Close menu, if still open + @screen.type(Sikuli::Key.ESC) + raise e + end + true + end +end + +When /^I type "([^"]+)"$/ do |string| + @screen.type(string) +end + +When /^I press the "([^"]+)" key$/ do |key| + begin + @screen.type(eval("Sikuli::Key.#{key}")) + rescue RuntimeError + raise "unsupported key #{key}" + end +end + +Then /^the (amnesiac|persistent) Tor Browser directory (exists|does not exist)$/ do |persistent_or_not, mode| + case persistent_or_not + when "amnesiac" + dir = "/home/#{LIVE_USER}/Tor Browser" + when "persistent" + dir = "/home/#{LIVE_USER}/Persistent/Tor Browser" + end + step "the directory \"#{dir}\" #{mode}" +end + +Then /^there is a GNOME bookmark for the (amnesiac|persistent) Tor Browser directory$/ do |persistent_or_not| + case persistent_or_not + when "amnesiac" + bookmark_image = 'TorBrowserAmnesicFilesBookmark.png' + when "persistent" + bookmark_image = 'TorBrowserPersistentFilesBookmark.png' + end + @screen.wait_and_click('GnomePlaces.png', 10) + @screen.wait(bookmark_image, 40) + @screen.type(Sikuli::Key.ESC) +end + +Then /^there is no GNOME bookmark for the persistent Tor Browser directory$/ do + try_for(65) do + @screen.wait_and_click('GnomePlaces.png', 10) + @screen.wait("GnomePlacesWithoutTorBrowserPersistent.png", 10) + @screen.type(Sikuli::Key.ESC) + end +end + +def pulseaudio_sink_inputs + pa_info = $vm.execute_successfully('pacmd info', :user => LIVE_USER).stdout + sink_inputs_line = pa_info.match(/^\d+ sink input\(s\) available\.$/)[0] + return sink_inputs_line.match(/^\d+/)[0].to_i +end + +When /^(no|\d+) application(?:s?) (?:is|are) playing audio(?:| after (\d+) seconds)$/ do |nb, wait_time| + nb = 0 if nb == "no" + sleep wait_time.to_i if ! wait_time.nil? + assert_equal(nb.to_i, pulseaudio_sink_inputs) +end + +When /^I double-click on the "Tails documentation" link on the Desktop$/ do + @screen.wait_and_double_click("DesktopTailsDocumentationIcon.png", 10) +end + +When /^I click the blocked video icon$/ do + @screen.wait_and_click("TorBrowserBlockedVideo.png", 30) +end + +When /^I accept to temporarily allow playing this video$/ do + @screen.wait_and_click("TorBrowserOkButton.png", 10) +end + +When /^I click the HTML5 play button$/ do + @screen.wait_and_click("TorBrowserHtml5PlayButton.png", 30) +end + +When /^I (can|cannot) save the current page as "([^"]+[.]html)" to the (.*) directory$/ do |should_work, output_file, output_dir| + should_work = should_work == 'can' ? true : false + @screen.type("s", Sikuli::KeyModifier.CTRL) + @screen.wait("TorBrowserSaveDialog.png", 10) + if output_dir == "persistent Tor Browser" + output_dir = "/home/#{LIVE_USER}/Persistent/Tor Browser" + @screen.wait_and_click("GtkTorBrowserPersistentBookmark.png", 10) + @screen.wait("GtkTorBrowserPersistentBookmarkSelected.png", 10) + # The output filename (without its extension) is already selected, + # let's use the keyboard shortcut to focus its field + @screen.type("n", Sikuli::KeyModifier.ALT) + @screen.wait("TorBrowserSaveOutputFileSelected.png", 10) + elsif output_dir == "default downloads" + output_dir = "/home/#{LIVE_USER}/Tor Browser" + else + @screen.type(output_dir + '/') + end + # Only the part of the filename before the .html extension can be easily replaced + # so we have to remove it before typing it into the arget filename entry widget. + @screen.type(output_file.sub(/[.]html$/, '')) + @screen.type(Sikuli::Key.ENTER) + if should_work + try_for(10, :msg => "The page was not saved to #{output_dir}/#{output_file}") { + $vm.file_exist?("#{output_dir}/#{output_file}") + } + else + @screen.wait("TorBrowserCannotSavePage.png", 10) + end +end + +When /^I can print the current page as "([^"]+[.]pdf)" to the (default downloads|persistent Tor Browser) directory$/ do |output_file, output_dir| + if output_dir == "persistent Tor Browser" + output_dir = "/home/#{LIVE_USER}/Persistent/Tor Browser" + else + output_dir = "/home/#{LIVE_USER}/Tor Browser" + end + @screen.type("p", Sikuli::KeyModifier.CTRL) + @screen.wait("TorBrowserPrintDialog.png", 20) + @screen.wait_and_click("BrowserPrintToFile.png", 10) + @screen.wait_and_double_click("TorBrowserPrintOutputFile.png", 10) + @screen.hide_cursor + @screen.wait("TorBrowserPrintOutputFileSelected.png", 10) + # Only the file's basename is selected by double-clicking, + # so we type only the desired file's basename to replace it + @screen.type(output_dir + '/' + output_file.sub(/[.]pdf$/, '') + Sikuli::Key.ENTER) + try_for(30, :msg => "The page was not printed to #{output_dir}/#{output_file}") { + $vm.file_exist?("#{output_dir}/#{output_file}") + } +end + +Given /^a web server is running on the LAN$/ do + web_server_ip_addr = $vmnet.bridge_ip_addr + web_server_port = 8000 + @web_server_url = "http://#{web_server_ip_addr}:#{web_server_port}" + web_server_hello_msg = "Welcome to the LAN web server!" + + # I've tested ruby Thread:s, fork(), etc. but nothing works due to + # various strange limitations in the ruby interpreter. For instance, + # apparently concurrent IO has serious limits in the thread + # scheduler (e.g. sikuli's wait() would block WEBrick from reading + # from its socket), and fork():ing results in a lot of complex + # cucumber stuff (like our hooks!) ending up in the child process, + # breaking stuff in the parent process. After asking some supposed + # ruby pros, I've settled on the following. + code = <<-EOF + require "webrick" + STDOUT.reopen("/dev/null", "w") + STDERR.reopen("/dev/null", "w") + server = WEBrick::HTTPServer.new(:BindAddress => "#{web_server_ip_addr}", + :Port => #{web_server_port}, + :DocumentRoot => "/dev/null") + server.mount_proc("/") do |req, res| + res.body = "#{web_server_hello_msg}" + end + server.start +EOF + proc = IO.popen(['ruby', '-e', code]) + try_for(10, :msg => "It seems the LAN web server failed to start") do + Process.kill(0, proc.pid) == 1 + end + + add_after_scenario_hook { Process.kill("TERM", proc.pid) } + + # It seems necessary to actually check that the LAN server is + # serving, possibly because it isn't doing so reliably when setting + # up. If e.g. the Unsafe Browser (which *should* be able to access + # the web server) tries to access it too early, Firefox seems to + # take some random amount of time to retry fetching. Curl gives a + # more consistent result, so let's rely on that instead. Note that + # this forces us to capture traffic *after* this step in case + # accessing this server matters, like when testing the Tor Browser.. + try_for(30, :msg => "Something is wrong with the LAN web server") do + msg = $vm.execute_successfully("curl #{@web_server_url}", + :user => LIVE_USER).stdout.chomp + web_server_hello_msg == msg + end +end + +When /^I open a page on the LAN web server in the (.*)$/ do |browser| + step "I open the address \"#{@web_server_url}\" in the #{browser}" +end + +Given /^I wait (?:between (\d+) and )?(\d+) seconds$/ do |min, max| + if min + time = rand(max.to_i - min.to_i + 1) + min.to_i + else + time = max.to_i + end + puts "Slept for #{time} seconds" + sleep(time) +end + +Given /^I (?:re)?start monitoring the AppArmor log of "([^"]+)"$/ do |profile| + # AppArmor log entries may be dropped if printk rate limiting is + # enabled. + $vm.execute_successfully('sysctl -w kernel.printk_ratelimit=0') + # We will only care about entries for this profile from this time + # and on. + guest_time = $vm.execute_successfully( + 'date +"%Y-%m-%d %H:%M:%S"').stdout.chomp + @apparmor_profile_monitoring_start ||= Hash.new + @apparmor_profile_monitoring_start[profile] = guest_time +end + +When /^AppArmor has (not )?denied "([^"]+)" from opening "([^"]+)"(?: after at most (\d+) seconds)?$/ do |anti_test, profile, file, time| + assert(@apparmor_profile_monitoring_start && + @apparmor_profile_monitoring_start[profile], + "It seems the profile '#{profile}' isn't being monitored by the " + + "'I monitor the AppArmor log of ...' step") + audit_line_regex = 'apparmor="DENIED" operation="open" profile="%s" name="%s"' % [profile, file] + block = Proc.new do + audit_log = $vm.execute( + "journalctl --full --no-pager " + + "--since='#{@apparmor_profile_monitoring_start[profile]}' " + + "SYSLOG_IDENTIFIER=kernel | grep -w '#{audit_line_regex}'" + ).stdout.chomp + assert(audit_log.empty? == (anti_test ? true : false)) + true + end + begin + if time + try_for(time.to_i) { block.call } + else + block.call + end + rescue Timeout::Error, Test::Unit::AssertionFailedError => e + raise e, "AppArmor has #{anti_test ? "" : "not "}denied the operation" + end +end + +Then /^I force Tor to use a new circuit$/ do + debug_log("Forcing new Tor circuit...") + $vm.execute_successfully('tor_control_send "signal NEWNYM"', :libs => 'tor') +end + +When /^I eject the boot medium$/ do + dev = boot_device + dev_type = device_info(dev)['ID_TYPE'] + case dev_type + when 'cd' + $vm.remove_cdrom + when 'disk' + boot_disk_name = $vm.disk_name(dev) + $vm.unplug_drive(boot_disk_name) + else + raise "Unsupported medium type '#{dev_type}' for boot device '#{dev}'" + end +end -- cgit v1.2.3-54-g00ecf