diff options
Diffstat (limited to 'hosts/profitbricks-build6-amd64/etc/munin')
5 files changed, 248 insertions, 0 deletions
diff --git a/hosts/profitbricks-build6-amd64/etc/munin/munin-node.conf b/hosts/profitbricks-build6-amd64/etc/munin/munin-node.conf new file mode 100644 index 00000000..7d5651aa --- /dev/null +++ b/hosts/profitbricks-build6-amd64/etc/munin/munin-node.conf @@ -0,0 +1,65 @@ +# +# Example config-file for munin-node +# + +log_level 4 +log_file /var/log/munin/munin-node.log +pid_file /var/run/munin/munin-node.pid + +background 1 +setsid 1 + +user root +group root + +# This is the timeout for the whole transaction. +# Units are in sec. Default is 15 min +# +# global_timeout 900 + +# This is the timeout for each plugin. +# Units are in sec. Default is 1 min +# +# timeout 60 + +# Regexps for files to ignore +ignore_file [\#~]$ +ignore_file DEADJOE$ +ignore_file \.bak$ +ignore_file %$ +ignore_file \.dpkg-(tmp|new|old|dist)$ +ignore_file \.rpm(save|new)$ +ignore_file \.pod$ + +# Set this if the client doesn't report the correct hostname when +# telnetting to localhost, port 4949 +# +#host_name localhost.localdomain + +# A list of addresses that are allowed to connect. This must be a +# regular expression, since Net::Server does not understand CIDR-style +# network notation unless the perl module Net::CIDR is installed. You +# may repeat the allow line as many times as you'd like + +allow ^127\.0\.0\.1$ +allow ^::1$ + +# If you have installed the Net::CIDR perl module, you can use one or more +# cidr_allow and cidr_deny address/mask patterns. A connecting client must +# match any cidr_allow, and not match any cidr_deny. Note that a netmask +# *must* be provided, even if it's /32 +# +# Example: +# +# cidr_allow 127.0.0.1/32 +# cidr_allow 192.0.2.0/24 +# cidr_deny 192.0.2.42/32 + +# Which address to bind to; +host * +# host 127.0.0.1 + +# And which port +port 4949 + +allow ^78\.137\.96\.196 diff --git a/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/df b/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/df new file mode 100644 index 00000000..124b2eb0 --- /dev/null +++ b/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/df @@ -0,0 +1,6 @@ +[df*] +env.exclude none unknown iso9660 squashfs udf romfs ramfs debugfs devtmpfs sysfs +env.exclude_re /srv/workspace/pbuilder /run /dev/disk/by /var/lib/schroot/mount /dev/shm /sys/fs/cgroup +env.warning 92 +env.critical 98 + diff --git a/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/diskstats b/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/diskstats new file mode 100644 index 00000000..8cf14814 --- /dev/null +++ b/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/diskstats @@ -0,0 +1,4 @@ +[diskstats] +env.trim_labels yes +env.include_only /dev/vda,/dev/vdb + diff --git a/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/munin-node b/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/munin-node new file mode 100644 index 00000000..e766928f --- /dev/null +++ b/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/munin-node @@ -0,0 +1,117 @@ +# This file is used to configure how the plugins are invoked. +# Place in /etc/munin/plugin-conf.d/ or corresponding directory. +# +# PLEASE NOTE: Changes in the plugin-conf.d directory are only +# read at munin-node startup, so restart at any changes. +# +# user <user> # Set the user to run the plugin as. +# group <group> # Set the group to run the plugin as. +# command <command> # Run <command> instead of the plugin. %c expands to +# what would normally be run. +# env.<variable> <value> # Sets <variable> in the plugin's environment, see the +# individual plugins to find out which variables they +# care about. + + +[amavis] +group adm +env.MUNIN_MKTEMP /bin/mktemp -p /tmp/ $1 +env.amavislog /var/log/mail.info + +[apt] +user root + +[courier_mta_mailqueue] +group daemon + +[courier_mta_mailstats] +group adm + +[courier_mta_mailvolume] +group adm + +[cps*] +user root + +[exim_mailqueue] +group adm, (Debian-exim) + +[exim_mailstats] +group adm, (Debian-exim) +env.logdir /var/log/exim4/ +env.logname mainlog + +[fw_conntrack] +user root + +[fw_forwarded_local] +user root + +[hddtemp_smartctl] +user root + +[hddtemp2] +user root + +[if_*] +user root + +[if_err_*] +user nobody + +[ip_*] +user root + +[ipmi_*] +user root + +[mysql*] +user root +env.mysqlopts --defaults-file=/etc/mysql/debian.cnf +env.mysqluser debian-sys-maint +env.mysqlconnection DBI:mysql:mysql;mysql_read_default_file=/etc/mysql/debian.cnf + +[postfix_mailqueue] +user postfix + +[postfix_mailstats] +group adm + +[postfix_mailvolume] +group adm +env.logfile mail.log + +[smart_*] +user root + +[vlan*] +user root + +[ejabberd*] +user ejabberd +env.statuses available away chat xa +env.days 1 7 30 + +[dhcpd3] +user root +env.leasefile /var/lib/dhcp3/dhcpd.leases +env.configfile /etc/dhcp3/dhcpd.conf + +[jmx_*] +env.ip 127.0.0.1 +env.port 5400 + +[samba] +user root + +[munin_stats] +user munin +group munin + +[postgres_*] +user postgres +env.PGUSER postgres +env.PGPORT 5432 + +[fail2ban] +user root diff --git a/hosts/profitbricks-build6-amd64/etc/munin/plugins/jenkins_reproducible_builds b/hosts/profitbricks-build6-amd64/etc/munin/plugins/jenkins_reproducible_builds new file mode 100755 index 00000000..238e4304 --- /dev/null +++ b/hosts/profitbricks-build6-amd64/etc/munin/plugins/jenkins_reproducible_builds @@ -0,0 +1,56 @@ +#!/bin/sh +# -*- sh -*- + +: << =cut + +=head1 NAME + +jenkins_reproducible_builds - Plugin to measure number of reproducible builds running + +=head1 AUTHOR + +Contributed by Holger Levsen + +=head1 LICENSE + +GPLv2 + +=head1 MAGIC MARKERS + + #%# family=auto + #%# capabilities=autoconf + +=cut + +. $MUNIN_LIBDIR/plugins/plugin.sh + +if [ "$1" = "autoconf" ]; then + echo yes + exit 0 +fi + +JOB_PREFIXES="first second" +if [ "$1" = "config" ]; then + echo 'graph_title Reproducible Builds in the last 24h' + echo 'graph_args --base 1000 -l 0 ' + echo 'graph_scale no' + echo 'graph_total total' + echo 'graph_vlabel Reproducible Builds in the last 24h' + echo 'graph_category jenkins' + draw=AREA + for PREFIX in $JOB_PREFIXES ; do + echo "jenkins_reproducible_${PREFIX}_build.label $PREFIX build" + echo "jenkins_reproducible_${PREFIX}_build.draw $draw" + if [ "$draw" = "AREA" ] ; then draw=STACK ; fi + done + exit 0 +fi + +for PREFIX in $JOB_PREFIXES ; do + if [ "$PREFIX" = "first" ] ; then + NR=$(pgrep -fc "bin/bash /srv/jenkins/bin/reproducible_build.sh 1") + else + NR=$(pgrep -fc "bin/bash /srv/jenkins/bin/reproducible_build.sh 2") + fi + echo "jenkins_reproducible_${PREFIX}_build.value $NR" + done |