summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--TODO20
-rwxr-xr-xbin/reproducible_build.sh116
2 files changed, 84 insertions, 52 deletions
diff --git a/TODO b/TODO
index e5bfab2f..2a79ae35 100644
--- a/TODO
+++ b/TODO
@@ -247,12 +247,11 @@ properties:
* open questions:
** save build-host in build_duration table too? (and change to saving the time of a single build, not both combined)
-** i believe "reproducible_build.sh 1" should immediatly move /srv/workspace/reproducible-builds/$NODE/$SUITE/$ARCH/$PKG/$VERSION to /srv/workspace/reproducible-builds/pending/$SUITE/$ARCH/$PKG/$VERSION (on the node) so it's only build once and so that we can detect stale builds
** maintenance is general, cleanup of started but interrupted builds...
* reproducible_build.sh behaviour change:
** called without param: behave as always
-** called with a single param, "1" or "2": do first or second build (as specified below)
+** called with the first param being "1" or "2" (and two more params, srcpkg and suite): do first or second build
** called with two params: $node1 and $node2 where the build should happen.
* reproducible_build.sh (with two params) will be still always be run on the main node, that is the one holding reproducible.db, so jenkins.d.n atm
@@ -276,23 +275,6 @@ properties:
** this script is run on all nodes, but each run is triggered by a single job running on the main node (jenkins atm), so the results can be captured in /srv/reproducible-results/node-information/$NODE and then eg be used by reproducible_html_dashboard.sh to create the table with the differences between 1st and 2nd build...
** /srv/reproducible-results/node-information/$NODE could also be read by reproducible_build.sh to determine the dpkg-architecture a node is captable of building, but I think we also want that info to be encoded in the build job names, so probably there's no need to read it...
-* how to build remotely, some terms and remarks:
-** main node = the one running reproducible_build.sh with two params, so jenkins.d.n atm
-** node = generic term for node1 or node2
-** please note the difference between /srv/workspace/reproducible-builds and /srv/workspace/reproducible-results and /srv/workspace/reproducible-builds/$NODE and /srv/workspace/reproducible-builds/pending and whether these are on a node or on the main node.
-
-
-1. reproducible_build.sh on main node determines what to build,
-2. downloads the sources, and put's the sha256sum of the .dsc file into /srv/workspace/reproducible-builds/$NODE/$SUITE/$ARCH/$PKG/$VERSION on the main node
-3. throws the source files away
-4. scp's /srv/workspace/reproducible-builds/$NODE/$SUITE/$ARCH/$PKG/$VERSION on the node where this should be build 1st
-5. runs "ssh $NODE1 /srv/jenkins/bin/reproducible_build.sh 1"
-6. this causes a 1st build, which downloads the sources as specified in /srv/workspace/reproducible-builds/$NODE/$SUITE/$ARCH/$PKG/$VERSION and compares the sha256sum and builds it and copies the result to /srv/workspace/reproducible-results/$NODE/$SUITE/$ARCH/$PKG/$VERSION and exits.
-7. reproducible_build.sh on the main node then tries to scp the result from $NODE:/srv/workspace/reproducible-results/$NODE...
-8. reproducible_build.sh on the main node then triggers the 2nd build as the 1st.
-9. voila
-
-
==== reproducible Debian armhf
* then: armhf building - run the job on jenkins.d.n and build1 on one host and build2 on another and then run debbindiff on jenkins.d.n…
diff --git a/bin/reproducible_build.sh b/bin/reproducible_build.sh
index e067ea8c..6f8671d4 100755
--- a/bin/reproducible_build.sh
+++ b/bin/reproducible_build.sh
@@ -13,9 +13,6 @@ common_init "$@"
set -e
-# support for different architectures
-ARCH="$(dpkg --print-architecture)"
-
# sleep 1-12 secs to randomize start times
delay_start() {
/bin/sleep $(echo "scale=1 ; $(shuf -i 1-120 -n 1)/10" | bc )
@@ -345,7 +342,7 @@ choose_package () {
ruby-patron|xxxxxxx)
export DEBUG=true
set -x
- irc_message "$BUILD_URL/console available to debug $SRCPACKAGE build in $SUITE"
+ irc_message "$BUILD_URL/console available to debug $SRCPACKAGE build in $SUITE/$ARCH"
;;
*) ;;
esac
@@ -355,7 +352,7 @@ choose_package () {
NOTIFY_MAINTAINER=$(echo $RESULT|cut -d "|" -f7)
local DEBUG_URL=$(echo $RESULT|cut -d "|" -f8)
if [ "$DEBUG_URL" = "TBD" ] ; then
- irc_message "The build of $SRCPACKAGE/$SUITE is starting at ${BUILD_URL}consoleFull"
+ irc_message "The build of $SRCPACKAGE/$SUITE/$ARCH is starting at ${BUILD_URL}consoleFull"
fi
if [ -z "$RESULT" ] ; then
echo "No packages scheduled, sleeping 30m."
@@ -405,7 +402,11 @@ get_source_package() {
RESULT=$?
fi
if [ $RESULT != 0 ] || [ "$(ls ${SRCPACKAGE}_*.dsc 2> /dev/null)" = "" ] ; then
- handle_404
+ if [ "$MODE" = "legacy" ] || [ "$MODE" = "ng" ] ; then
+ handle_404
+ else
+ exit 404 # FIXME: this is unhandled atm
+ fi
fi
}
@@ -428,9 +429,9 @@ check_suitability() {
if ! $SUITABLE ; then handle_not_for_us $ARCHITECTURES ; fi
}
-first_build(){
- local TMPCFG=$(mktemp -t pbuilderrc_XXXX --tmpdir=$TMPDIR)
+first_build() {
set -x
+ local TMPCFG=$(mktemp -t pbuilderrc_XXXX --tmpdir=$TMPDIR)
cat > "$TMPCFG" << EOF
BUILDUSERID=1111
BUILDUSERNAME=pbuilder1
@@ -451,6 +452,33 @@ EOF
rm $TMPCFG
}
+second_build() {
+ set -x
+ local TMPCFG=$(mktemp -t pbuilderrc_XXXX --tmpdir=$TMPDIR)
+ cat > "$TMPCFG" << EOF
+BUILDUSERID=2222
+BUILDUSERNAME=pbuilder2
+export DEB_BUILD_OPTIONS="parallel=$(echo $NUM_CPU-1|bc)"
+export TZ="/usr/share/zoneinfo/Etc/GMT-14"
+export LANG="fr_CH.UTF-8"
+export LC_ALL="fr_CH.UTF-8"
+umask 0002
+EOF
+ # remember to change the sudoers setting if you change the following command
+ sudo timeout -k 12.1h 12h /usr/bin/ionice -c 3 /usr/bin/nice \
+ /usr/bin/linux64 --uname-2.6 \
+ /usr/bin/unshare --uts -- \
+ /usr/sbin/pbuilder --build \
+ --configfile $TMPCFG \
+ --hookdir /etc/pbuilder/rebuild-hooks \
+ --debbuildopts "-b" \
+ --basetgz /var/cache/pbuilder/$SUITE-reproducible-base.tgz \
+ --buildresult b2 \
+ --logfile b2/build.log \
+ ${SRCPACKAGE}_${EVERSION}.dsc || true # exit with 1 when ftbfs
+ if ! "$DEBUG" ; then set +x ; fi
+}
+
check_buildinfo() {
local TMPFILE1=$(mktemp --tmpdir=$TMPDIR)
local TMPFILE2=$(mktemp --tmpdir=$TMPDIR)
@@ -485,37 +513,26 @@ check_buildinfo() {
build_rebuild() {
FTBFS=1
mkdir b1 b2
- first_build
+ if [ "$MODE" = "legacy" ] ; then
+ first_build
+ else
+ ssh $NODE1 /srv/jenkins/bin/reproducible_build.sh 1 ${SRCPACKAGE} ${SUITE}
+ scp -r $NODE1:$PWD/b1 .
+ ssh $NODE1 "rm -r $PWD/b1"
+ fi
if [ -f b1/${SRCPACKAGE}_${EVERSION}_${ARCH}.changes ] ; then
# the first build did not FTBFS, try rebuild it.
check_for_race_conditions
echo "============================================================================="
echo "Re-building ${SRCPACKAGE}/${VERSION} in ${SUITE} on ${ARCH} now."
echo "============================================================================="
- set -x
- local TMPCFG=$(mktemp -t pbuilderrc_XXXX --tmpdir=$TMPDIR)
- cat > "$TMPCFG" << EOF
-BUILDUSERID=2222
-BUILDUSERNAME=pbuilder2
-export DEB_BUILD_OPTIONS="parallel=$(echo $NUM_CPU-1|bc)"
-export TZ="/usr/share/zoneinfo/Etc/GMT-14"
-export LANG="fr_CH.UTF-8"
-export LC_ALL="fr_CH.UTF-8"
-umask 0002
-EOF
- # remember to change the sudoers setting if you change the following command
- sudo timeout -k 12.1h 12h /usr/bin/ionice -c 3 /usr/bin/nice \
- /usr/bin/linux64 --uname-2.6 \
- /usr/bin/unshare --uts -- \
- /usr/sbin/pbuilder --build \
- --configfile $TMPCFG \
- --hookdir /etc/pbuilder/rebuild-hooks \
- --debbuildopts "-b" \
- --basetgz /var/cache/pbuilder/$SUITE-reproducible-base.tgz \
- --buildresult b2 \
- --logfile b2/build.log \
- ${SRCPACKAGE}_${EVERSION}.dsc || true # exit with 1 when ftbfs
- if ! "$DEBUG" ; then set +x ; fi
+ if [ "$MODE" = "legacy" ] ; then
+ second_build
+ else
+ ssh $NODE1 /srv/jenkins/bin/reproducible_build.sh 2
+ scp -r $NODE1:$PWD/b2 .
+ ssh $NODE1 "rm -r $PWD/b2"
+ fi
if [ -f b2/${SRCPACKAGE}_${EVERSION}_${ARCH}.changes ] ; then
# both builds were fine, i.e., they did not FTBFS.
FTBFS=0
@@ -540,6 +557,39 @@ START=$(date +'%s')
RBUILDLOG=$(mktemp --tmpdir=$TMPDIR)
BAD_LOCKFILE=false
BUILDER="${JOB_NAME#reproducible_builder_}/${BUILD_ID}"
+ARCH="$(dpkg --print-architecture)"
+
+# determine mode
+if [ "$1" = "" ] ; then
+ MODE="legacy"
+elif [ "$1" = "1" ] || [ "$1" = "2" ] ; then
+ MODE="$1"
+ SRCPACKAGE="$2"
+ SUITE="$3"
+ get source_package
+ mkdir b$MODE
+ if [ "$MODE" = "1" ] ; then
+ first_build
+ else
+ second_build
+ fi
+ exit 0
+elif [ "$2" != "" ] ; then
+ MODE="ng"
+ NODE1="$1"
+ NODE2="$2"
+ # overwrite ARCH for remote builds
+ for i in $ARCHS ; do
+ # try to match ARCH in nodenames
+ if [[ "$NODE1" =~ .*-$i.* ]] ; then
+ ARCH=i
+ fi
+ done
+ if [ -z "$ARCH" ] ; then
+ echo "Error: could not detect architecture, exiting."
+ exit 1
+ fi
+fi
choose_package # defines SUITE, PKGID, SRCPACKAGE, SCHEDULED_DATE, SAVE_ARTIFACTS, NOTIFY