summaryrefslogtreecommitdiffstats
path: root/hosts/profitbricks-build6-amd64
diff options
context:
space:
mode:
authorHolger Levsen <holger@layer-acht.org>2016-03-25 14:04:17 -0400
committerHolger Levsen <holger@layer-acht.org>2016-03-25 14:04:17 -0400
commitd4a521c6aadfb2b86d8a278d8d850050d14315ee (patch)
treed33fce16704be09d60892a3c33764912ce0e4c8d /hosts/profitbricks-build6-amd64
parentc4e034a518e8d034a2fa5d9127579d774e8f6e79 (diff)
downloadjenkins.debian.net-d4a521c6aadfb2b86d8a278d8d850050d14315ee.tar.xz
reproducible debian: pb-build2+6-amd64 have been reinstalled and renamed to pb-build2+6-i386
Diffstat (limited to 'hosts/profitbricks-build6-amd64')
-rw-r--r--hosts/profitbricks-build6-amd64/etc/aliases3
-rw-r--r--hosts/profitbricks-build6-amd64/etc/apt/apt.conf.d/80proxy2
-rw-r--r--hosts/profitbricks-build6-amd64/etc/apt/listchanges.conf6
-rw-r--r--hosts/profitbricks-build6-amd64/etc/apt/sources.list11
-rwxr-xr-xhosts/profitbricks-build6-amd64/etc/cron.d/dsa10
-rw-r--r--hosts/profitbricks-build6-amd64/etc/munin/munin-node.conf65
-rw-r--r--hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/df6
-rw-r--r--hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/diskstats4
-rw-r--r--hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/munin-node117
-rwxr-xr-xhosts/profitbricks-build6-amd64/etc/munin/plugins/jenkins_reproducible_builds56
-rwxr-xr-xhosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/B01_cleanup17
-rwxr-xr-xhosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/C01_cleanup21
-rwxr-xr-xhosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/D01_modify_environment34
-rw-r--r--hosts/profitbricks-build6-amd64/etc/pbuilderrc38
-rw-r--r--hosts/profitbricks-build6-amd64/etc/postfix/main.cf41
-rwxr-xr-xhosts/profitbricks-build6-amd64/etc/rc.local31
-rw-r--r--hosts/profitbricks-build6-amd64/etc/schroot/default/fstab24
-rw-r--r--hosts/profitbricks-build6-amd64/etc/schroot/default/nssdatabases11
-rw-r--r--hosts/profitbricks-build6-amd64/etc/squid3/squid.conf5787
-rw-r--r--hosts/profitbricks-build6-amd64/etc/sudoers.d/jenkins53
-rw-r--r--hosts/profitbricks-build6-amd64/etc/sudoers.d/jenkins-adm7
-rwxr-xr-xhosts/profitbricks-build6-amd64/usr/local/bin/dsa-check-running-kernel252
-rwxr-xr-xhosts/profitbricks-build6-amd64/usr/local/sbin/nagios-check-libs204
23 files changed, 0 insertions, 6800 deletions
diff --git a/hosts/profitbricks-build6-amd64/etc/aliases b/hosts/profitbricks-build6-amd64/etc/aliases
deleted file mode 100644
index c968028c..00000000
--- a/hosts/profitbricks-build6-amd64/etc/aliases
+++ /dev/null
@@ -1,3 +0,0 @@
-# See man 5 aliases for format
-postmaster: root
-root: holger@layer-acht.org, helmutg@debian.org, mattia@mapreri.org
diff --git a/hosts/profitbricks-build6-amd64/etc/apt/apt.conf.d/80proxy b/hosts/profitbricks-build6-amd64/etc/apt/apt.conf.d/80proxy
deleted file mode 100644
index fe4b3b77..00000000
--- a/hosts/profitbricks-build6-amd64/etc/apt/apt.conf.d/80proxy
+++ /dev/null
@@ -1,2 +0,0 @@
-Acquire::http::Proxy "http://127.0.0.1:3128/";
-
diff --git a/hosts/profitbricks-build6-amd64/etc/apt/listchanges.conf b/hosts/profitbricks-build6-amd64/etc/apt/listchanges.conf
deleted file mode 100644
index 8b598c0a..00000000
--- a/hosts/profitbricks-build6-amd64/etc/apt/listchanges.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-[apt]
-frontend=mail
-email_address=root
-confirm=0
-save_seen=/var/lib/apt/listchanges.db
-which=both
diff --git a/hosts/profitbricks-build6-amd64/etc/apt/sources.list b/hosts/profitbricks-build6-amd64/etc/apt/sources.list
deleted file mode 100644
index 20fb4620..00000000
--- a/hosts/profitbricks-build6-amd64/etc/apt/sources.list
+++ /dev/null
@@ -1,11 +0,0 @@
-deb http://ftp.de.debian.org/debian/ jessie main contrib non-free
-#deb-src http://ftp.de.debian.org/debian/ jessie main contrib non-free
-
-deb http://ftp.de.debian.org/debian/ jessie-updates main contrib non-free
-#deb-src http://ftp.de.debian.org/debian/ jessie-updates main contrib non-free
-
-deb http://security.debian.org/ jessie/updates main contrib non-free
-#deb-src http://security.debian.org/ jessie/updates main contrib non-free
-
-deb http://ftp.de.debian.org/debian/ jessie-backports main contrib non-free
-#deb-src http://ftp.de.debian.org/debian/ jessie-backports main contrib non-free
diff --git a/hosts/profitbricks-build6-amd64/etc/cron.d/dsa b/hosts/profitbricks-build6-amd64/etc/cron.d/dsa
deleted file mode 100755
index 9be64c36..00000000
--- a/hosts/profitbricks-build6-amd64/etc/cron.d/dsa
+++ /dev/null
@@ -1,10 +0,0 @@
-# m h dom mon dow (0|7=sun,1=mon) command
-
-#
-# cron-jobs for jenkins.debian.net and nodes
-#
-
-MAILTO=root
-
-0 1,13 * * * nobody /usr/bin/chronic /usr/local/bin/dsa-check-running-kernel
-2 1,13 * * * nobody /usr/bin/chronic /usr/local/bin/dsa-check-packages
diff --git a/hosts/profitbricks-build6-amd64/etc/munin/munin-node.conf b/hosts/profitbricks-build6-amd64/etc/munin/munin-node.conf
deleted file mode 100644
index 7d5651aa..00000000
--- a/hosts/profitbricks-build6-amd64/etc/munin/munin-node.conf
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-# Example config-file for munin-node
-#
-
-log_level 4
-log_file /var/log/munin/munin-node.log
-pid_file /var/run/munin/munin-node.pid
-
-background 1
-setsid 1
-
-user root
-group root
-
-# This is the timeout for the whole transaction.
-# Units are in sec. Default is 15 min
-#
-# global_timeout 900
-
-# This is the timeout for each plugin.
-# Units are in sec. Default is 1 min
-#
-# timeout 60
-
-# Regexps for files to ignore
-ignore_file [\#~]$
-ignore_file DEADJOE$
-ignore_file \.bak$
-ignore_file %$
-ignore_file \.dpkg-(tmp|new|old|dist)$
-ignore_file \.rpm(save|new)$
-ignore_file \.pod$
-
-# Set this if the client doesn't report the correct hostname when
-# telnetting to localhost, port 4949
-#
-#host_name localhost.localdomain
-
-# A list of addresses that are allowed to connect. This must be a
-# regular expression, since Net::Server does not understand CIDR-style
-# network notation unless the perl module Net::CIDR is installed. You
-# may repeat the allow line as many times as you'd like
-
-allow ^127\.0\.0\.1$
-allow ^::1$
-
-# If you have installed the Net::CIDR perl module, you can use one or more
-# cidr_allow and cidr_deny address/mask patterns. A connecting client must
-# match any cidr_allow, and not match any cidr_deny. Note that a netmask
-# *must* be provided, even if it's /32
-#
-# Example:
-#
-# cidr_allow 127.0.0.1/32
-# cidr_allow 192.0.2.0/24
-# cidr_deny 192.0.2.42/32
-
-# Which address to bind to;
-host *
-# host 127.0.0.1
-
-# And which port
-port 4949
-
-allow ^78\.137\.96\.196
diff --git a/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/df b/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/df
deleted file mode 100644
index b3fdadcb..00000000
--- a/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/df
+++ /dev/null
@@ -1,6 +0,0 @@
-[df*]
-env.exclude none unknown iso9660 squashfs udf romfs ramfs debugfs devtmpfs sysfs
-env.exclude_re /srv/workspace/pbuilder /run /dev/disk/by /var/lib/schroot/mount /srv/workspace/varlibschroot /dev/shm /sys/fs/cgroup
-env.warning 92
-env.critical 98
-
diff --git a/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/diskstats b/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/diskstats
deleted file mode 100644
index 8cf14814..00000000
--- a/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/diskstats
+++ /dev/null
@@ -1,4 +0,0 @@
-[diskstats]
-env.trim_labels yes
-env.include_only /dev/vda,/dev/vdb
-
diff --git a/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/munin-node b/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/munin-node
deleted file mode 100644
index e766928f..00000000
--- a/hosts/profitbricks-build6-amd64/etc/munin/plugin-conf.d/munin-node
+++ /dev/null
@@ -1,117 +0,0 @@
-# This file is used to configure how the plugins are invoked.
-# Place in /etc/munin/plugin-conf.d/ or corresponding directory.
-#
-# PLEASE NOTE: Changes in the plugin-conf.d directory are only
-# read at munin-node startup, so restart at any changes.
-#
-# user <user> # Set the user to run the plugin as.
-# group <group> # Set the group to run the plugin as.
-# command <command> # Run <command> instead of the plugin. %c expands to
-# what would normally be run.
-# env.<variable> <value> # Sets <variable> in the plugin's environment, see the
-# individual plugins to find out which variables they
-# care about.
-
-
-[amavis]
-group adm
-env.MUNIN_MKTEMP /bin/mktemp -p /tmp/ $1
-env.amavislog /var/log/mail.info
-
-[apt]
-user root
-
-[courier_mta_mailqueue]
-group daemon
-
-[courier_mta_mailstats]
-group adm
-
-[courier_mta_mailvolume]
-group adm
-
-[cps*]
-user root
-
-[exim_mailqueue]
-group adm, (Debian-exim)
-
-[exim_mailstats]
-group adm, (Debian-exim)
-env.logdir /var/log/exim4/
-env.logname mainlog
-
-[fw_conntrack]
-user root
-
-[fw_forwarded_local]
-user root
-
-[hddtemp_smartctl]
-user root
-
-[hddtemp2]
-user root
-
-[if_*]
-user root
-
-[if_err_*]
-user nobody
-
-[ip_*]
-user root
-
-[ipmi_*]
-user root
-
-[mysql*]
-user root
-env.mysqlopts --defaults-file=/etc/mysql/debian.cnf
-env.mysqluser debian-sys-maint
-env.mysqlconnection DBI:mysql:mysql;mysql_read_default_file=/etc/mysql/debian.cnf
-
-[postfix_mailqueue]
-user postfix
-
-[postfix_mailstats]
-group adm
-
-[postfix_mailvolume]
-group adm
-env.logfile mail.log
-
-[smart_*]
-user root
-
-[vlan*]
-user root
-
-[ejabberd*]
-user ejabberd
-env.statuses available away chat xa
-env.days 1 7 30
-
-[dhcpd3]
-user root
-env.leasefile /var/lib/dhcp3/dhcpd.leases
-env.configfile /etc/dhcp3/dhcpd.conf
-
-[jmx_*]
-env.ip 127.0.0.1
-env.port 5400
-
-[samba]
-user root
-
-[munin_stats]
-user munin
-group munin
-
-[postgres_*]
-user postgres
-env.PGUSER postgres
-env.PGPORT 5432
-
-[fail2ban]
-user root
diff --git a/hosts/profitbricks-build6-amd64/etc/munin/plugins/jenkins_reproducible_builds b/hosts/profitbricks-build6-amd64/etc/munin/plugins/jenkins_reproducible_builds
deleted file mode 100755
index e990c127..00000000
--- a/hosts/profitbricks-build6-amd64/etc/munin/plugins/jenkins_reproducible_builds
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/bin/sh
-# -*- sh -*-
-
-: << =cut
-
-=head1 NAME
-
-jenkins_reproducible_builds - Plugin to measure number of reproducible builds running
-
-=head1 AUTHOR
-
-Contributed by Holger Levsen
-
-=head1 LICENSE
-
-GPLv2
-
-=head1 MAGIC MARKERS
-
- #%# family=auto
- #%# capabilities=autoconf
-
-=cut
-
-. $MUNIN_LIBDIR/plugins/plugin.sh
-
-if [ "$1" = "autoconf" ]; then
- echo yes
- exit 0
-fi
-
-JOB_PREFIXES="first second"
-if [ "$1" = "config" ]; then
- echo 'graph_title Concurrent reproducible builds running'
- echo 'graph_args --base 1000 -l 0 '
- echo 'graph_scale no'
- echo 'graph_total total'
- echo 'graph_vlabel Concurrent reproducible builds running'
- echo 'graph_category jenkins'
- draw=AREA
- for PREFIX in $JOB_PREFIXES ; do
- echo "jenkins_reproducible_${PREFIX}_build.label $PREFIX build"
- echo "jenkins_reproducible_${PREFIX}_build.draw $draw"
- if [ "$draw" = "AREA" ] ; then draw=STACK ; fi
- done
- exit 0
-fi
-
-for PREFIX in $JOB_PREFIXES ; do
- if [ "$PREFIX" = "first" ] ; then
- NR=$(pgrep -fc "bin/bash /srv/jenkins/bin/reproducible_build.sh 1")
- else
- NR=$(pgrep -fc "bin/bash /srv/jenkins/bin/reproducible_build.sh 2")
- fi
- echo "jenkins_reproducible_${PREFIX}_build.value $NR"
- done
diff --git a/hosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/B01_cleanup b/hosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/B01_cleanup
deleted file mode 100755
index bbea69fa..00000000
--- a/hosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/B01_cleanup
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-set -e
-
-BUILDDIR="${BUILDDIR:-/tmp/buildd}"
-
-# exit if we are in the same UTS namespace as init ( != 2nd build )
-[ "$(readlink /proc/1/ns/uts)" = "$(readlink /proc/self/ns/uts)" ] && exit 0
-
-# cease using disorderfs
-if [ -d /tmp/disorderfs ] ; then
- echo -n "Unmounting /tmp/disorderfs…"
- fusermount -u "$BUILDDIR"
- rmdir "$BUILDDIR"
- mv /tmp/disorderfs "$BUILDDIR"
- echo " done."
-fi
diff --git a/hosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/C01_cleanup b/hosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/C01_cleanup
deleted file mode 100755
index 73f4083c..00000000
--- a/hosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/C01_cleanup
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-
-set -e
-
-BUILDDIR="${BUILDDIR:-/tmp/buildd}"
-
-echo "debug output: disk usage on $(hostname) at $(date -u)"
-df -h
-echo
-
-# exit if we are in the same UTS namespace as init ( != 2nd build )
-[ "$(readlink /proc/1/ns/uts)" = "$(readlink /proc/self/ns/uts)" ] && exit 0
-
-# cease using disorderfs
-if [ -d /tmp/disorderfs ] ; then
- echo -n "Unmounting /tmp/disorderfs…"
- fusermount -u "$BUILDDIR"
- rmdir "$BUILDDIR"
- mv /tmp/disorderfs "$BUILDDIR"
- echo " done."
-fi
diff --git a/hosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/D01_modify_environment b/hosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/D01_modify_environment
deleted file mode 100755
index 62ae3d03..00000000
--- a/hosts/profitbricks-build6-amd64/etc/pbuilder/rebuild-hooks/D01_modify_environment
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-
-set -e
-
-BUILDDIR="${BUILDDIR:-/tmp/buildd}"
-
-# exit if we are in the same UTS namespace as init ( != 2nd build )
-[ "$(readlink /proc/1/ns/uts)" = "$(readlink /proc/self/ns/uts)" ] && exit 0
-
-echo "I: Changing host+domainname to test build reproducibility" >&2
-sed -e '/^127.0.0.1/s/$/ i-capture-the-hostname i-capture-the-hostname.i-capture-the-domain/' -i /etc/hosts
-hostname i-capture-the-hostname
-domainname i-capture-the-domain
-echo "I: Adding a custom variable just for the fun of it..." >&2
-export CAPTURE_ENVIRONMENT="I capture the environment"
-
-echo "I: Changing /bin/sh to bash" >&2
-echo "dash dash/sh boolean false" | debconf-set-selections
-DEBIAN_FRONTEND=noninteractive dpkg-reconfigure dash
-
-# temporarily disable disorderfs as we have problems properly unmounting it
-exit 0
-
-# use disorderfs
-if [ -x /usr/bin/disorderfs ] ; then
- echo -n "Moving $BUILDDIR to /tmp/disorderfs and mounting this as $BUILDDIR via the fuse disorderfs…"
- mknod -m 666 /dev/fuse c 10 229
- mv "$BUILDDIR" /tmp/disorderfs
- mkdir "$BUILDDIR"
- disorderfs --multi-user=yes /tmp/disorderfs "$BUILDDIR"
- echo " done."
-else
- echo "Warning: disorderfs not available."
-fi
diff --git a/hosts/profitbricks-build6-amd64/etc/pbuilderrc b/hosts/profitbricks-build6-amd64/etc/pbuilderrc
deleted file mode 100644
index 25292bfa..00000000
--- a/hosts/profitbricks-build6-amd64/etc/pbuilderrc
+++ /dev/null
@@ -1,38 +0,0 @@
-# this is your configuration file for pbuilder.
-# the file in /usr/share/pbuilder/pbuilderrc is the default template.
-# /etc/pbuilderrc is the one meant for overwriting defaults in
-# the default template
-#
-# read pbuilderrc.5 document for notes on specific options.
-case $HOSTNAME in
- jenkins|profitbricks-build?-amd64) MIRRORSITE=http://ftp.de.debian.org/debian ;;
- bbx15|bpi0|cbxi4*|hb0|wbq0|odxu4*|wbd0|rpi2*|ff2*|ff4*|opi2*) MIRRORSITE=http://ftp.us.debian.org/debian ;;
- *) echo "unsupported host, exiting." ; exit 1 ;;
-esac
-EXTRAPACKAGES="" # better list them in bin/reproducible_setup_pbuilder.sh
-APTCACHE=""
-COMPRESSPROG="pigz"
-BUILDPLACE=/srv/workspace/pbuilder # build in /srv/workspace, which is in tmpfs
-# unset proxy, see #780587
-unset http_proxy
-export -n http_proxy
-# /sys and /proc were added as workarounds for #773767
-# there are software wanting /dev/shm writable, so give them so. There are tons
-# of bug shm related in pbuilder, that's just a workaround for all of them.
-# /run/shm is already mounted as a tmpfs by default.
-BINDMOUNTS="$BINDMOUNTS /sys /dev/shm"
-# set PATH to predictable values, see #780729 and #780725
-PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games"
-
-# used for reproducible builds tests, when doing the 2nd build
-if [ "$(readlink /proc/1/ns/uts)" != "$(readlink /proc/self/ns/uts)" ]; then
- PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path"
-fi
-
-# needed to ignore failures due to running 398 days in the future…
-case "$PBCURRENTCOMMANDLINEOPERATION" in
- --create|create)
- APTGETOPT=(-o Acquire::Check-Valid-Until="false")
- ;;
-esac
-
diff --git a/hosts/profitbricks-build6-amd64/etc/postfix/main.cf b/hosts/profitbricks-build6-amd64/etc/postfix/main.cf
deleted file mode 100644
index 7c8cda2c..00000000
--- a/hosts/profitbricks-build6-amd64/etc/postfix/main.cf
+++ /dev/null
@@ -1,41 +0,0 @@
-# See /usr/share/postfix/main.cf.dist for a commented, more complete version
-
-
-# Debian specific: Specifying a file name will cause the first
-# line of that file to be used as the name. The Debian default
-# is /etc/mailname.
-#myorigin = /etc/mailname
-
-smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
-biff = no
-
-# appending .domain is the MUA's job.
-append_dot_mydomain = no
-
-# Uncomment the next line to generate "delayed mail" warnings
-#delay_warning_time = 4h
-
-readme_directory = no
-
-# TLS parameters
-smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
-smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
-smtpd_use_tls=yes
-smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
-smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
-
-# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
-# information on enabling SSL in the smtp client.
-
-myhostname = profitbricks-build6-amd64.debian.net
-alias_maps = hash:/etc/aliases
-alias_database = hash:/etc/aliases
-myorigin = /etc/mailname
-mydestination = profitbricks-build6-amd64.debian.net, localhost
-relayhost =
-#mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
-mynetworks = 127.0.0.0/8
-mailbox_size_limit = 0
-recipient_delimiter = +
-inet_interfaces = all
-mailbox_command = /usr/bin/procmail -a "$EXTENSION"
diff --git a/hosts/profitbricks-build6-amd64/etc/rc.local b/hosts/profitbricks-build6-amd64/etc/rc.local
deleted file mode 100755
index 59131fcb..00000000
--- a/hosts/profitbricks-build6-amd64/etc/rc.local
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/sh -e
-#
-# rc.local
-#
-# This script is executed at the end of each multiuser runlevel.
-# Make sure that the script will "exit 0" on success or any other
-# value on error.
-#
-# In order to enable or disable this script just change the execution
-# bits.
-#
-# By default this script does nothing.
-
-echo "$(date -u) - system was rebooted" | mail -s "$(hostname -f) rebooted" root
-
-# disable systemd date services (and don't fail if systemd ain't running)
-systemctl disable systemd-timesyncd
-systemctl disable systemd-timedated
-systemctl stop systemd-timesyncd || true
-systemctl stop systemd-timedated || true
-# set correct date
-ntpdate -b de.pool.ntp.org
-# set fake date
-date --set="+398 days +6 hours + 23 minutes"
-# disable check for outdated packages as in the future (like this)
-# packages from security.d.o will appear outdated always…
-ln -sf /bin/true /usr/local/bin/dsa-check-packages
-# finally report success
-echo "$(date -u) - system is running in the future now" | mail -s "$(hostname -f) in the future" root
-
-exit 0
diff --git a/hosts/profitbricks-build6-amd64/etc/schroot/default/fstab b/hosts/profitbricks-build6-amd64/etc/schroot/default/fstab
deleted file mode 100644
index 74468dd2..00000000
--- a/hosts/profitbricks-build6-amd64/etc/schroot/default/fstab
+++ /dev/null
@@ -1,24 +0,0 @@
-# fstab: static file system information for chroots.
-# Note that the mount point will be prefixed by the chroot path
-# (CHROOT_PATH)
-#
-# <file system> <mount point> <type> <options> <dump> <pass>
-/proc /proc none rw,bind 0 0
-/sys /sys none rw,bind 0 0
-/dev /dev none rw,bind 0 0
-/dev/pts /dev/pts none rw,bind 0 0
-/home /home none rw,bind 0 0
-/tmp /tmp none rw,bind 0 0
-/srv/reproducible-results /srv/reproducible-results none rw,bind 0 0
-/srv/d-i /srv/d-i none rw,bind 0 0
-/srv/jenkins /srv/jenkins none rw,bind 0 0
-/srv/live-build /srv/live-build none rw,bind 0 0
-
-# It may be desirable to have access to /run, especially if you wish
-# to run additional services in the chroot. However, note that this
-# may potentially cause undesirable behaviour on upgrades, such as
-# killing services on the host.
-#/run /run none rw,bind 0 0
-#/run/lock /run/lock none rw,bind 0 0
-/dev/shm /dev/shm none rw,bind 0 0
-/run/shm /run/shm none rw,bind 0 0
diff --git a/hosts/profitbricks-build6-amd64/etc/schroot/default/nssdatabases b/hosts/profitbricks-build6-amd64/etc/schroot/default/nssdatabases
deleted file mode 100644
index 72615e5d..00000000
--- a/hosts/profitbricks-build6-amd64/etc/schroot/default/nssdatabases
+++ /dev/null
@@ -1,11 +0,0 @@
-# System databases to copy into the chroot from the host system.
-#
-# <database name>
-passwd
-shadow
-group
-gshadow
-#services
-protocols
-networks
-hosts
diff --git a/hosts/profitbricks-build6-amd64/etc/squid3/squid.conf b/hosts/profitbricks-build6-amd64/etc/squid3/squid.conf
deleted file mode 100644
index d7b6fabe..00000000
--- a/hosts/profitbricks-build6-amd64/etc/squid3/squid.conf
+++ /dev/null
@@ -1,5787 +0,0 @@
-# WELCOME TO SQUID 3.1.20
-# ----------------------------
-#
-# This is the documentation for the Squid configuration file.
-# This documentation can also be found online at:
-# http://www.squid-cache.org/Doc/config/
-#
-# You may wish to look at the Squid home page and wiki for the
-# FAQ and other documentation:
-# http://www.squid-cache.org/
-# http://wiki.squid-cache.org/SquidFaq
-# http://wiki.squid-cache.org/ConfigExamples
-#
-# This documentation shows what the defaults for various directives
-# happen to be. If you don't need to change the default, you should
-# leave the line out of your squid.conf in most cases.
-#
-# In some cases "none" refers to no default setting at all,
-# while in other cases it refers to the value of the option
-# - the comments for that keyword indicate if this is the case.
-#
-
-# Configuration options can be included using the "include" directive.
-# Include takes a list of files to include. Quoting and wildcards are
-# supported.
-#
-# For example,
-#
-# include /path/to/included/file/squid.acl.config
-#
-# Includes can be nested up to a hard-coded depth of 16 levels.
-# This arbitrary restriction is to prevent recursive include references
-# from causing Squid entering an infinite loop whilst trying to load
-# configuration files.
-
-# TAG: dns_testnames
-# Remove this line. DNS is no longer tested on startup.
-#Default:
-# none
-
-# TAG: extension_methods
-# Remove this line. All valid methods for HTTP are accepted by default.
-#Default:
-# none
-
-# TAG: incoming_rate
-#Default:
-# none
-
-# TAG: server_http11
-# Remove this line. HTTP/1.1 is supported by default.
-#Default:
-# none
-
-# TAG: upgrade_http0.9
-# Remove this line. ICY/1.0 streaming protocol is supported by default.
-#Default:
-# none
-
-# TAG: zph_local
-# Alter these entries. Use the qos_flows directive instead.
-#Default:
-# none
-
-# TAG: header_access
-# Since squid-3.0 replace with request_header_access or reply_header_access
-# depending on whether you wish to match client requests or server replies.
-#Default:
-# none
-
-# TAG: httpd_accel_no_pmtu_disc
-# Since squid-3.0 use the 'disable-pmtu-discovery' flag on http_port instead.
-#Default:
-# none
-
-# OPTIONS FOR AUTHENTICATION
-# -----------------------------------------------------------------------------
-
-# TAG: auth_param
-# This is used to define parameters for the various authentication
-# schemes supported by Squid.
-#
-# format: auth_param scheme parameter [setting]
-#
-# The order in which authentication schemes are presented to the client is
-# dependent on the order the scheme first appears in config file. IE
-# has a bug (it's not RFC 2617 compliant) in that it will use the basic
-# scheme if basic is the first entry presented, even if more secure
-# schemes are presented. For now use the order in the recommended
-# settings section below. If other browsers have difficulties (don't
-# recognize the schemes offered even if you are using basic) either
-# put basic first, or disable the other schemes (by commenting out their
-# program entry).
-#
-# Once an authentication scheme is fully configured, it can only be
-# shutdown by shutting squid down and restarting. Changes can be made on
-# the fly and activated with a reconfigure. I.E. You can change to a
-# different helper, but not unconfigure the helper completely.
-#
-# Please note that while this directive defines how Squid processes
-# authentication it does not automatically activate authentication.
-# To use authentication you must in addition make use of ACLs based
-# on login name in http_access (proxy_auth, proxy_auth_regex or
-# external with %LOGIN used in the format tag). The browser will be
-# challenged for authentication on the first such acl encountered
-# in http_access processing and will also be re-challenged for new
-# login credentials if the request is being denied by a proxy_auth
-# type acl.
-#
-# WARNING: authentication can't be used in a transparently intercepting
-# proxy as the client then thinks it is talking to an origin server and
-# not the proxy. This is a limitation of bending the TCP/IP protocol to
-# transparently intercepting port 80, not a limitation in Squid.
-# Ports flagged 'transparent', 'intercept', or 'tproxy' have
-# authentication disabled.
-#
-# === Parameters for the basic scheme follow. ===
-#
-# "program" cmdline
-# Specify the command for the external authenticator. Such a program
-# reads a line containing "username password" and replies "OK" or
-# "ERR" in an endless loop. "ERR" responses may optionally be followed
-# by a error description available as %m in the returned error page.
-# If you use an authenticator, make sure you have 1 acl of type
-# proxy_auth.
-#
-# By default, the basic authentication scheme is not used unless a
-# program is specified.
-#
-# If you want to use the traditional NCSA proxy authentication, set
-# this line to something like
-#
-# auth_param basic program /usr/lib/squid3/ncsa_auth /usr/etc/passwd
-#
-# "utf8" on|off
-# HTTP uses iso-latin-1 as characterset, while some authentication
-# backends such as LDAP expects UTF-8. If this is set to on Squid will
-# translate the HTTP iso-latin-1 charset to UTF-8 before sending the
-# username & password to the helper.
-#
-# "children" numberofchildren
-# The number of authenticator processes to spawn. If you start too few
-# Squid will have to wait for them to process a backlog of credential
-# verifications, slowing it down. When password verifications are
-# done via a (slow) network you are likely to need lots of
-# authenticator processes.
-# auth_param basic children 5
-#
-# "concurrency" concurrency
-# The number of concurrent requests the helper can process.
-# The default of 0 is used for helpers who only supports
-# one request at a time. Setting this changes the protocol used to
-# include a channel number first on the request/response line, allowing
-# multiple requests to be sent to the same helper in parallell without
-# wating for the response.
-# Must not be set unless it's known the helper supports this.
-# auth_param basic concurrency 0
-#
-# "realm" realmstring
-# Specifies the realm name which is to be reported to the
-# client for the basic proxy authentication scheme (part of
-# the text the user will see when prompted their username and
-# password). There is no default.
-# auth_param basic realm Squid proxy-caching web server
-#
-# "credentialsttl" timetolive
-# Specifies how long squid assumes an externally validated
-# username:password pair is valid for - in other words how
-# often the helper program is called for that user. Set this
-# low to force revalidation with short lived passwords. Note
-# setting this high does not impact your susceptibility
-# to replay attacks unless you are using an one-time password
-# system (such as SecureID). If you are using such a system,
-# you will be vulnerable to replay attacks unless you also
-# use the max_user_ip ACL in an http_access rule.
-#
-# "casesensitive" on|off
-# Specifies if usernames are case sensitive. Most user databases are
-# case insensitive allowing the same username to be spelled using both
-# lower and upper case letters, but some are case sensitive. This
-# makes a big difference for user_max_ip ACL processing and similar.
-# auth_param basic casesensitive off
-#
-# === Parameters for the digest scheme follow ===
-#
-# "program" cmdline
-# Specify the command for the external authenticator. Such
-# a program reads a line containing "username":"realm" and
-# replies with the appropriate H(A1) value hex encoded or
-# ERR if the user (or his H(A1) hash) does not exists.
-# See rfc 2616 for the definition of H(A1).
-# "ERR" responses may optionally be followed by a error description
-# available as %m in the returned error page.
-#
-# By default, the digest authentication scheme is not used unless a
-# program is specified.
-#
-# If you want to use a digest authenticator, set this line to
-# something like
-#
-# auth_param digest program /usr/lib/squid3/digest_pw_auth /usr/etc/digpass
-#
-# "utf8" on|off
-# HTTP uses iso-latin-1 as characterset, while some authentication
-# backends such as LDAP expects UTF-8. If this is set to on Squid will
-# translate the HTTP iso-latin-1 charset to UTF-8 before sending the
-# username & password to the helper.
-#
-# "children" numberofchildren
-# The number of authenticator processes to spawn (no default).
-# If you start too few Squid will have to wait for them to
-# process a backlog of H(A1) calculations, slowing it down.
-# When the H(A1) calculations are done via a (slow) network
-# you are likely to need lots of authenticator processes.
-# auth_param digest children 5
-#
-# "realm" realmstring
-# Specifies the realm name which is to be reported to the
-# client for the digest proxy authentication scheme (part of
-# the text the user will see when prompted their username and
-# password). There is no default.
-# auth_param digest realm Squid proxy-caching web server
-#
-# "nonce_garbage_interval" timeinterval
-# Specifies the interval that nonces that have been issued
-# to client_agent's are checked for validity.
-#
-# "nonce_max_duration" timeinterval
-# Specifies the maximum length of time a given nonce will be
-# valid for.
-#
-# "nonce_max_count" number
-# Specifies the maximum number of times a given nonce can be
-# used.
-#
-# "nonce_strictness" on|off
-# Determines if squid requires strict increment-by-1 behavior
-# for nonce counts, or just incrementing (off - for use when
-# useragents generate nonce counts that occasionally miss 1
-# (ie, 1,2,4,6)). Default off.
-#
-# "check_nonce_count" on|off
-# This directive if set to off can disable the nonce count check
-# completely to work around buggy digest qop implementations in
-# certain mainstream browser versions. Default on to check the
-# nonce count to protect from authentication replay attacks.
-#
-# "post_workaround" on|off
-# This is a workaround to certain buggy browsers who sends
-# an incorrect request digest in POST requests when reusing
-# the same nonce as acquired earlier on a GET request.
-#
-# === NTLM scheme options follow ===
-#
-# "program" cmdline
-# Specify the command for the external NTLM authenticator.
-# Such a program reads exchanged NTLMSSP packets with
-# the browser via Squid until authentication is completed.
-# If you use an NTLM authenticator, make sure you have 1 acl
-# of type proxy_auth. By default, the NTLM authenticator_program
-# is not used.
-#
-# auth_param ntlm program /usr/lib/squid3/ntlm_auth
-#
-# "children" numberofchildren
-# The number of authenticator processes to spawn (no default).
-# If you start too few Squid will have to wait for them to
-# process a backlog of credential verifications, slowing it
-# down. When credential verifications are done via a (slow)
-# network you are likely to need lots of authenticator
-# processes.
-#
-# auth_param ntlm children 5
-#
-# "keep_alive" on|off
-# Whether to keep the connection open after the initial response where
-# Squid tells the browser which schemes are supported by the proxy.
-# Some browsers are known to present many login popups or to corrupt
-# POST/PUT requests transfer if the connection is not closed.
-# The default is currently OFF to avoid this, but may change.
-#
-# auth_param ntlm keep_alive on
-#
-# === Options for configuring the NEGOTIATE auth-scheme follow ===
-#
-# "program" cmdline
-# Specify the command for the external Negotiate authenticator.
-# This protocol is used in Microsoft Active-Directory enabled setups with
-# the Microsoft Internet Explorer or Mozilla Firefox browsers.
-# Its main purpose is to exchange credentials with the Squid proxy
-# using the Kerberos mechanisms.
-# If you use a Negotiate authenticator, make sure you have at least
-# one acl of type proxy_auth active. By default, the negotiate
-# authenticator_program is not used.
-# The only supported program for this role is the ntlm_auth
-# program distributed as part of Samba, version 4 or later.
-#
-# auth_param negotiate program /usr/lib/squid3/ntlm_auth --helper-protocol=gss-spnego
-#
-# "children" numberofchildren
-# The number of authenticator processes to spawn (no default).
-# If you start too few Squid will have to wait for them to
-# process a backlog of credential verifications, slowing it
-# down. When crendential verifications are done via a (slow)
-# network you are likely to need lots of authenticator
-# processes.
-# auth_param negotiate children 5
-#
-# "keep_alive" on|off
-# Whether to keep the connection open after the initial response where
-# Squid tells the browser which schemes are supported by the proxy.
-# Some browsers are known to present many login popups or to corrupt
-# POST/PUT requests transfer if the connection is not closed.
-# The default is currently OFF to avoid this, but may change.
-#
-# auth_param negotiate keep_alive on
-#
-#
-# Examples:
-#
-##Recommended minimum configuration per scheme:
-##auth_param negotiate program <uncomment and complete this line to activate>
-##auth_param negotiate children 5
-##auth_param negotiate keep_alive on
-##
-##auth_param ntlm program <uncomment and complete this line to activate>
-##auth_param ntlm children 5
-##auth_param ntlm keep_alive on
-##
-##auth_param digest program <uncomment and complete this line>
-##auth_param digest children 5
-##auth_param digest realm Squid proxy-caching web server
-##auth_param digest nonce_garbage_interval 5 minutes
-##auth_param digest nonce_max_duration 30 minutes
-##auth_param digest nonce_max_count 50
-##
-##auth_param basic program <uncomment and complete this line>
-##auth_param basic children 5
-##auth_param basic realm Squid proxy-caching web server
-##auth_param basic credentialsttl 2 hours
-#Default:
-# none
-
-# TAG: authenticate_cache_garbage_interval
-# The time period between garbage collection across the username cache.
-# This is a tradeoff between memory utilization (long intervals - say
-# 2 days) and CPU (short intervals - say 1 minute). Only change if you
-# have good reason to.
-#Default:
-# authenticate_cache_garbage_interval 1 hour
-
-# TAG: authenticate_ttl
-# The time a user & their credentials stay in the logged in
-# user cache since their last request. When the garbage
-# interval passes, all user credentials that have passed their
-# TTL are removed from memory.
-#Default:
-# authenticate_ttl 1 hour
-
-# TAG: authenticate_ip_ttl
-# If you use proxy authentication and the 'max_user_ip' ACL,
-# this directive controls how long Squid remembers the IP
-# addresses associated with each user. Use a small value
-# (e.g., 60 seconds) if your users might change addresses
-# quickly, as is the case with dialups. You might be safe
-# using a larger value (e.g., 2 hours) in a corporate LAN
-# environment with relatively static address assignments.
-#Default:
-# authenticate_ip_ttl 0 seconds
-
-# ACCESS CONTROLS
-# -----------------------------------------------------------------------------
-
-# TAG: external_acl_type
-# This option defines external acl classes using a helper program
-# to look up the status
-#
-# external_acl_type name [options] FORMAT.. /path/to/helper [helper arguments..]
-#
-# Options:
-#
-# ttl=n TTL in seconds for cached results (defaults to 3600
-# for 1 hour)
-# negative_ttl=n
-# TTL for cached negative lookups (default same
-# as ttl)
-# children=n Number of acl helper processes spawn to service
-# external acl lookups of this type. (default 5)
-# concurrency=n concurrency level per process. Only used with helpers
-# capable of processing more than one query at a time.
-# cache=n result cache size, 0 is unbounded (default)
-# grace=n Percentage remaining of TTL where a refresh of a
-# cached entry should be initiated without needing to
-# wait for a new reply. (default 0 for no grace period)
-# protocol=2.5 Compatibility mode for Squid-2.5 external acl helpers
-# ipv4 / ipv6 IP protocol used to communicate with this helper.
-# The default is to auto-detect IPv6 and use it when available.
-#
-# FORMAT specifications
-#
-# %LOGIN Authenticated user login name
-# %EXT_USER Username from external acl
-# %IDENT Ident user name
-# %SRC Client IP
-# %SRCPORT Client source port
-# %URI Requested URI
-# %DST Requested host
-# %PROTO Requested protocol
-# %PORT Requested port
-# %PATH Requested URL path
-# %METHOD Request method
-# %MYADDR Squid interface address
-# %MYPORT Squid http_port number
-# %PATH Requested URL-path (including query-string if any)
-# %USER_CERT SSL User certificate in PEM format
-# %USER_CERTCHAIN SSL User certificate chain in PEM format
-# %USER_CERT_xx SSL User certificate subject attribute xx
-# %USER_CA_xx SSL User certificate issuer attribute xx
-#
-# %>{Header} HTTP request header "Header"
-# %>{Hdr:member}
-# HTTP request header "Hdr" list member "member"
-# %>{Hdr:;member}
-# HTTP request header list member using ; as
-# list separator. ; can be any non-alphanumeric
-# character.
-#
-# %<{Header} HTTP reply header "Header"
-# %<{Hdr:member}
-# HTTP reply header "Hdr" list member "member"
-# %<{Hdr:;member}
-# HTTP reply header list member using ; as
-# list separator. ; can be any non-alphanumeric
-# character.
-#
-# %% The percent sign. Useful for helpers which need
-# an unchanging input format.
-#
-# In addition to the above, any string specified in the referencing
-# acl will also be included in the helper request line, after the
-# specified formats (see the "acl external" directive)
-#
-# The helper receives lines per the above format specification,
-# and returns lines starting with OK or ERR indicating the validity
-# of the request and optionally followed by additional keywords with
-# more details.
-#
-# General result syntax:
-#
-# OK/ERR keyword=value ...
-#
-# Defined keywords:
-#
-# user= The users name (login)
-# password= The users password (for login= cache_peer option)
-# message= Message describing the reason. Available as %o
-# in error pages
-# tag= Apply a tag to a request (for both ERR and OK results)
-# Only sets a tag, does not alter existing tags.
-# log= String to be logged in access.log. Available as
-# %ea in logformat specifications
-#
-# If protocol=3.0 (the default) then URL escaping is used to protect
-# each value in both requests and responses.
-#
-# If using protocol=2.5 then all values need to be enclosed in quotes
-# if they may contain whitespace, or the whitespace escaped using \.
-# And quotes or \ characters within the keyword value must be \ escaped.
-#
-# When using the concurrency= option the protocol is changed by
-# introducing a query channel tag infront of the request/response.
-# The query channel tag is a number between 0 and concurrency-1.
-#Default:
-# none
-
-# TAG: acl
-# Defining an Access List
-#
-# Every access list definition must begin with an aclname and acltype,
-# followed by either type-specific arguments or a quoted filename that
-# they are read from.
-#
-# acl aclname acltype argument ...
-# acl aclname acltype "file" ...
-#
-# When using "file", the file should contain one item per line.
-#
-# By default, regular expressions are CASE-SENSITIVE.
-# To make them case-insensitive, use the -i option. To return case-sensitive
-# use the +i option between patterns, or make a new ACL line without -i.
-#
-# Some acl types require suspending the current request in order
-# to access some external data source.
-# Those which do are marked with the tag [slow], those which
-# don't are marked as [fast].
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl
-# for further information
-#
-# ***** ACL TYPES AVAILABLE *****
-#
-# acl aclname src ip-address/netmask ... # clients IP address [fast]
-# acl aclname src addr1-addr2/netmask ... # range of addresses [fast]
-# acl aclname dst ip-address/netmask ... # URL host's IP address [slow]
-# acl aclname myip ip-address/netmask ... # local socket IP address [fast]
-#
-# acl aclname arp mac-address ... (xx:xx:xx:xx:xx:xx notation)
-# # The arp ACL requires the special configure option --enable-arp-acl.
-# # Furthermore, the ARP ACL code is not portable to all operating systems.
-# # It works on Linux, Solaris, Windows, FreeBSD, and some
-# # other *BSD variants.
-# # [fast]
-# #
-# # NOTE: Squid can only determine the MAC address for clients that are on
-# # the same subnet. If the client is on a different subnet,
-# # then Squid cannot find out its MAC address.
-#
-# acl aclname srcdomain .foo.com ...
-# # reverse lookup, from client IP [slow]
-# acl aclname dstdomain .foo.com ...
-# # Destination server from URL [fast]
-# acl aclname srcdom_regex [-i] \.foo\.com ...
-# # regex matching client name [slow]
-# acl aclname dstdom_regex [-i] \.foo\.com ...
-# # regex matching server [fast]
-# #
-# # For dstdomain and dstdom_regex a reverse lookup is tried if a IP
-# # based URL is used and no match is found. The name "none" is used
-# # if the reverse lookup fails.
-#
-# acl aclname src_as number ...
-# acl aclname dst_as number ...
-# # [fast]
-# # Except for access control, AS numbers can be used for
-# # routing of requests to specific caches. Here's an
-# # example for routing all requests for AS#1241 and only
-# # those to mycache.mydomain.net:
-# # acl asexample dst_as 1241
-# # cache_peer_access mycache.mydomain.net allow asexample
-# # cache_peer_access mycache_mydomain.net deny all
-#
-# acl aclname peername myPeer ...
-# # [fast]
-# # match against a named cache_peer entry
-# # set unique name= on cache_peer lines for reliable use.
-#
-# acl aclname time [day-abbrevs] [h1:m1-h2:m2]
-# # [fast]
-# # day-abbrevs:
-# # S - Sunday
-# # M - Monday
-# # T - Tuesday
-# # W - Wednesday
-# # H - Thursday
-# # F - Friday
-# # A - Saturday
-# # h1:m1 must be less than h2:m2
-#
-# acl aclname url_regex [-i] ^http:// ...
-# # regex matching on whole URL [fast]
-# acl aclname urlpath_regex [-i] \.gif$ ...
-# # regex matching on URL path [fast]
-#
-# acl aclname port 80 70 21 0-1024... # destination TCP port [fast]
-# # ranges are alloed
-# acl aclname myport 3128 ... # local socket TCP port [fast]
-# acl aclname myportname 3128 ... # http(s)_port name [fast]
-#
-# acl aclname proto HTTP FTP ... # request protocol [fast]
-#
-# acl aclname method GET POST ... # HTTP request method [fast]
-#
-# acl aclname http_status 200 301 500- 400-403 ...
-# # status code in reply [fast]
-#
-# acl aclname browser [-i] regexp ...
-# # pattern match on User-Agent header (see also req_header below) [fast]
-#
-# acl aclname referer_regex [-i] regexp ...
-# # pattern match on Referer header [fast]
-# # Referer is highly unreliable, so use with care
-#
-# acl aclname ident username ...
-# acl aclname ident_regex [-i] pattern ...
-# # string match on ident output [slow]
-# # use REQUIRED to accept any non-null ident.
-#
-# acl aclname proxy_auth [-i] username ...
-# acl aclname proxy_auth_regex [-i] pattern ...
-# # perform http authentication challenge to the client and match against
-# # supplied credentials [slow]
-# #
-# # takes a list of allowed usernames.
-# # use REQUIRED to accept any valid username.
-# #
-# # Will use proxy authentication in forward-proxy scenarios, and plain
-# # http authenticaiton in reverse-proxy scenarios
-# #
-# # NOTE: when a Proxy-Authentication header is sent but it is not
-# # needed during ACL checking the username is NOT logged
-# # in access.log.
-# #
-# # NOTE: proxy_auth requires a EXTERNAL authentication program
-# # to check username/password combinations (see
-# # auth_param directive).
-# #
-# # NOTE: proxy_auth can't be used in a transparent/intercepting proxy
-# # as the browser needs to be configured for using a proxy in order
-# # to respond to proxy authentication.
-#
-# acl aclname snmp_community string ...
-# # A community string to limit access to your SNMP Agent [fast]
-# # Example:
-# #
-# # acl snmppublic snmp_community public
-#
-# acl aclname maxconn number
-# # This will be matched when the client's IP address has
-# # more than <number> TCP connections established. [fast]
-# # NOTE: This only measures direct TCP links so X-Forwarded-For
-# # indirect clients are not counted.
-#
-# acl aclname max_user_ip [-s] number
-# # This will be matched when the user attempts to log in from more
-# # than <number> different ip addresses. The authenticate_ip_ttl
-# # parameter controls the timeout on the ip entries. [fast]
-# # If -s is specified the limit is strict, denying browsing
-# # from any further IP addresses until the ttl has expired. Without
-# # -s Squid will just annoy the user by "randomly" denying requests.
-# # (the counter is reset each time the limit is reached and a
-# # request is denied)
-# # NOTE: in acceleration mode or where there is mesh of child proxies,
-# # clients may appear to come from multiple addresses if they are
-# # going through proxy farms, so a limit of 1 may cause user problems.
-#
-# acl aclname req_mime_type [-i] mime-type ...
-# # regex match against the mime type of the request generated
-# # by the client. Can be used to detect file upload or some
-# # types HTTP tunneling requests [fast]
-# # NOTE: This does NOT match the reply. You cannot use this
-# # to match the returned file type.
-#
-# acl aclname req_header header-name [-i] any\.regex\.here
-# # regex match against any of the known request headers. May be
-# # thought of as a superset of "browser", "referer" and "mime-type"
-# # ACL [fast]
-#
-# acl aclname rep_mime_type [-i] mime-type ...
-# # regex match against the mime type of the reply received by
-# # squid. Can be used to detect file download or some
-# # types HTTP tunneling requests. [fast]
-# # NOTE: This has no effect in http_access rules. It only has
-# # effect in rules that affect the reply data stream such as
-# # http_reply_access.
-#
-# acl aclname rep_header header-name [-i] any\.regex\.here
-# # regex match against any of the known reply headers. May be
-# # thought of as a superset of "browser", "referer" and "mime-type"
-# # ACLs [fast]
-#
-# acl aclname external class_name [arguments...]
-# # external ACL lookup via a helper class defined by the
-# # external_acl_type directive [slow]
-#
-# acl aclname user_cert attribute values...
-# # match against attributes in a user SSL certificate
-# # attribute is one of DN/C/O/CN/L/ST [fast]
-#
-# acl aclname ca_cert attribute values...
-# # match against attributes a users issuing CA SSL certificate
-# # attribute is one of DN/C/O/CN/L/ST [fast]
-#
-# acl aclname ext_user username ...
-# acl aclname ext_user_regex [-i] pattern ...
-# # string match on username returned by external acl helper [slow]
-# # use REQUIRED to accept any non-null user name.
-#
-# acl aclname tag tagvalue ...
-# # string match on tag returned by external acl helper [slow]
-#
-# Examples:
-# acl macaddress arp 09:00:2b:23:45:67
-# acl myexample dst_as 1241
-# acl password proxy_auth REQUIRED
-# acl fileupload req_mime_type -i ^multipart/form-data$
-# acl javascript rep_mime_type -i ^application/x-javascript$
-#
-#Default:
-# acl all src all
-#
-#
-# Recommended minimum configuration:
-# (now built-in)
-#acl manager proto cache_object
-#acl localhost src 127.0.0.1/32 ::1
-#acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
-
-# Example rule allowing access from your local networks.
-# Adapt to list your (internal) IP networks from where browsing
-# should be allowed
-#acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
-#acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
-#acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
-#acl localnet src fc00::/7 # RFC 4193 local private network range
-#acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
-
-acl SSL_ports port 443
-acl Safe_ports port 80 # http
-acl Safe_ports port 21 # ftp
-acl Safe_ports port 443 # https
-acl Safe_ports port 70 # gopher
-acl Safe_ports port 210 # wais
-acl Safe_ports port 1025-65535 # unregistered ports
-acl Safe_ports port 280 # http-mgmt
-acl Safe_ports port 488 # gss-http
-acl Safe_ports port 591 # filemaker
-acl Safe_ports port 777 # multiling http
-acl CONNECT method CONNECT
-
-# TAG: follow_x_forwarded_for
-# Allowing or Denying the X-Forwarded-For header to be followed to
-# find the original source of a request.
-#
-# Requests may pass through a chain of several other proxies
-# before reaching us. The X-Forwarded-For header will contain a
-# comma-separated list of the IP addresses in the chain, with the
-# rightmost address being the most recent.
-#
-# If a request reaches us from a source that is allowed by this
-# configuration item, then we consult the X-Forwarded-For header
-# to see where that host received the request from. If the
-# X-Forwarded-For header contains multiple addresses, we continue
-# backtracking until we reach an address for which we are not allowed
-# to follow the X-Forwarded-For header, or until we reach the first
-# address in the list. For the purpose of ACL used in the
-# follow_x_forwarded_for directive the src ACL type always matches
-# the address we are testing and srcdomain matches its rDNS.
-#
-# The end result of this process is an IP address that we will
-# refer to as the indirect client address. This address may
-# be treated as the client address for access control, ICAP, delay
-# pools and logging, depending on the acl_uses_indirect_client,
-# icap_uses_indirect_client, delay_pool_uses_indirect_client and
-# log_uses_indirect_client options.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-# SECURITY CONSIDERATIONS:
-#
-# Any host for which we follow the X-Forwarded-For header
-# can place incorrect information in the header, and Squid
-# will use the incorrect information as if it were the
-# source address of the request. This may enable remote
-# hosts to bypass any access control restrictions that are
-# based on the client's source addresses.
-#
-# For example:
-#
-# acl localhost src 127.0.0.1
-# acl my_other_proxy srcdomain .proxy.example.com
-# follow_x_forwarded_for allow localhost
-# follow_x_forwarded_for allow my_other_proxy
-#Default:
-# follow_x_forwarded_for deny all
-
-# TAG: acl_uses_indirect_client on|off
-# Controls whether the indirect client address
-# (see follow_x_forwarded_for) is used instead of the
-# direct client address in acl matching.
-#
-# NOTE: maxconn ACL considers direct TCP links and indirect
-# clients will always have zero. So no match.
-#Default:
-# acl_uses_indirect_client on
-
-# TAG: delay_pool_uses_indirect_client on|off
-# Controls whether the indirect client address
-# (see follow_x_forwarded_for) is used instead of the
-# direct client address in delay pools.
-#Default:
-# delay_pool_uses_indirect_client on
-
-# TAG: log_uses_indirect_client on|off
-# Controls whether the indirect client address
-# (see follow_x_forwarded_for) is used instead of the
-# direct client address in the access log.
-#Default:
-# log_uses_indirect_client on
-
-# TAG: http_access
-# Allowing or Denying access based on defined access lists
-#
-# Access to the HTTP port:
-# http_access allow|deny [!]aclname ...
-#
-# NOTE on default values:
-#
-# If there are no "access" lines present, the default is to deny
-# the request.
-#
-# If none of the "access" lines cause a match, the default is the
-# opposite of the last line in the list. If the last line was
-# deny, the default is allow. Conversely, if the last line
-# is allow, the default will be deny. For these reasons, it is a
-# good idea to have an "deny all" entry at the end of your access
-# lists to avoid potential confusion.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-#Default:
-# http_access deny all
-#
-
-#
-# Recommended minimum Access Permission configuration:
-#
-# Only allow cachemgr access from localhost
-http_access allow manager localhost
-http_access deny manager
-
-# Deny requests to certain unsafe ports
-http_access deny !Safe_ports
-
-# Deny CONNECT to other than secure SSL ports
-http_access deny CONNECT !SSL_ports
-
-# We strongly recommend the following be uncommented to protect innocent
-# web applications running on the proxy server who think the only
-# one who can access services on "localhost" is a local user
-#http_access deny to_localhost
-
-#
-# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
-#
-
-# Example rule allowing access from your local networks.
-# Adapt localnet in the ACL section to list your (internal) IP networks
-# from where browsing should be allowed
-#http_access allow localnet
-http_access allow localhost
-
-# And finally deny all other access to this proxy
-http_access deny all
-
-# TAG: adapted_http_access
-# Allowing or Denying access based on defined access lists
-#
-# Essentially identical to http_access, but runs after redirectors
-# and ICAP/eCAP adaptation. Allowing access control based on their
-# output.
-#
-# If not set then only http_access is used.
-#Default:
-# none
-
-# TAG: http_reply_access
-# Allow replies to client requests. This is complementary to http_access.
-#
-# http_reply_access allow|deny [!] aclname ...
-#
-# NOTE: if there are no access lines present, the default is to allow
-# all replies
-#
-# If none of the access lines cause a match the opposite of the
-# last line will apply. Thus it is good practice to end the rules
-# with an "allow all" or "deny all" entry.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# none
-
-# TAG: icp_access
-# Allowing or Denying access to the ICP port based on defined
-# access lists
-#
-# icp_access allow|deny [!]aclname ...
-#
-# See http_access for details
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-## Allow ICP queries from local networks only
-##icp_access allow localnet
-##icp_access deny all
-#Default:
-# icp_access deny all
-
-# TAG: htcp_access
-# Allowing or Denying access to the HTCP port based on defined
-# access lists
-#
-# htcp_access allow|deny [!]aclname ...
-#
-# See http_access for details
-#
-# NOTE: The default if no htcp_access lines are present is to
-# deny all traffic. This default may cause problems with peers
-# using the htcp or htcp-oldsquid options.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-## Allow HTCP queries from local networks only
-##htcp_access allow localnet
-##htcp_access deny all
-#Default:
-# htcp_access deny all
-
-# TAG: htcp_clr_access
-# Allowing or Denying access to purge content using HTCP based
-# on defined access lists
-#
-# htcp_clr_access allow|deny [!]aclname ...
-#
-# See http_access for details
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-## Allow HTCP CLR requests from trusted peers
-#acl htcp_clr_peer src 172.16.1.2
-#htcp_clr_access allow htcp_clr_peer
-#Default:
-# htcp_clr_access deny all
-
-# TAG: miss_access
-# Determins whether network access is permitted when satisfying a request.
-#
-# For example;
-# to force your neighbors to use you as a sibling instead of
-# a parent.
-#
-# acl localclients src 172.16.0.0/16
-# miss_access allow localclients
-# miss_access deny !localclients
-#
-# This means only your local clients are allowed to fetch relayed/MISS
-# replies from the network and all other clients can only fetch cached
-# objects (HITs).
-#
-#
-# The default for this setting allows all clients who passed the
-# http_access rules to relay via this proxy.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# miss_access allow all
-
-# TAG: ident_lookup_access
-# A list of ACL elements which, if matched, cause an ident
-# (RFC 931) lookup to be performed for this request. For
-# example, you might choose to always perform ident lookups
-# for your main multi-user Unix boxes, but not for your Macs
-# and PCs. By default, ident lookups are not performed for
-# any requests.
-#
-# To enable ident lookups for specific client addresses, you
-# can follow this example:
-#
-# acl ident_aware_hosts src 198.168.1.0/24
-# ident_lookup_access allow ident_aware_hosts
-# ident_lookup_access deny all
-#
-# Only src type ACL checks are fully supported. A srcdomain
-# ACL might work at times, but it will not always provide
-# the correct result.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# ident_lookup_access deny all
-
-# TAG: reply_body_max_size size [acl acl...]
-# This option specifies the maximum size of a reply body. It can be
-# used to prevent users from downloading very large files, such as
-# MP3's and movies. When the reply headers are received, the
-# reply_body_max_size lines are processed, and the first line where
-# all (if any) listed ACLs are true is used as the maximum body size
-# for this reply.
-#
-# This size is checked twice. First when we get the reply headers,
-# we check the content-length value. If the content length value exists
-# and is larger than the allowed size, the request is denied and the
-# user receives an error message that says "the request or reply
-# is too large." If there is no content-length, and the reply
-# size exceeds this limit, the client's connection is just closed
-# and they will receive a partial reply.
-#
-# WARNING: downstream caches probably can not detect a partial reply
-# if there is no content-length header, so they will cache
-# partial responses and give them out as hits. You should NOT
-# use this option if you have downstream caches.
-#
-# WARNING: A maximum size smaller than the size of squid's error messages
-# will cause an infinite loop and crash squid. Ensure that the smallest
-# non-zero value you use is greater that the maximum header size plus
-# the size of your largest error page.
-#
-# If you set this parameter none (the default), there will be
-# no limit imposed.
-#
-# Configuration Format is:
-# reply_body_max_size SIZE UNITS [acl ...]
-# ie.
-# reply_body_max_size 10 MB
-#
-#Default:
-# none
-
-# NETWORK OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: http_port
-# Usage: port [options]
-# hostname:port [options]
-# 1.2.3.4:port [options]
-#
-# The socket addresses where Squid will listen for HTTP client
-# requests. You may specify multiple socket addresses.
-# There are three forms: port alone, hostname with port, and
-# IP address with port. If you specify a hostname or IP
-# address, Squid binds the socket to that specific
-# address. This replaces the old 'tcp_incoming_address'
-# option. Most likely, you do not need to bind to a specific
-# address, so you can use the port number alone.
-#
-# If you are running Squid in accelerator mode, you
-# probably want to listen on port 80 also, or instead.
-#
-# The -a command line option may be used to specify additional
-# port(s) where Squid listens for proxy request. Such ports will
-# be plain proxy ports with no options.
-#
-# You may specify multiple socket addresses on multiple lines.
-#
-# Options:
-#
-# intercept Support for IP-Layer interception of
-# outgoing requests without browser settings.
-# NP: disables authentication and IPv6 on the port.
-#
-# tproxy Support Linux TPROXY for spoofing outgoing
-# connections using the client IP address.
-# NP: disables authentication and maybe IPv6 on the port.
-#
-# accel Accelerator mode. Also needs at least one of
-# vhost / vport / defaultsite.
-#
-# allow-direct Allow direct forwarding in accelerator mode. Normally
-# accelerated requests are denied direct forwarding as if
-# never_direct was used.
-#
-# defaultsite=domainname
-# What to use for the Host: header if it is not present
-# in a request. Determines what site (not origin server)
-# accelerators should consider the default.
-# Implies accel.
-#
-# vhost Accelerator mode using Host header for virtual domain support.
-# Also uses the port as specified in Host: header unless
-# overridden by the vport option. Implies accel.
-#
-# vport Virtual host port support. Using the http_port number
-# instead of the port passed on Host: headers. Implies accel.
-#
-# vport=NN Virtual host port support. Using the specified port
-# number instead of the port passed on Host: headers.
-# Implies accel.
-#
-# protocol= Protocol to reconstruct accelerated requests with.
-# Defaults to http.
-#
-# ignore-cc Ignore request Cache-Control headers.
-#
-# Warning: This option violates HTTP specifications if
-# used in non-accelerator setups.
-#
-# connection-auth[=on|off]
-# use connection-auth=off to tell Squid to prevent
-# forwarding Microsoft connection oriented authentication
-# (NTLM, Negotiate and Kerberos)
-#
-# disable-pmtu-discovery=
-# Control Path-MTU discovery usage:
-# off lets OS decide on what to do (default).
-# transparent disable PMTU discovery when transparent
-# support is enabled.
-# always disable always PMTU discovery.
-#
-# In many setups of transparently intercepting proxies
-# Path-MTU discovery can not work on traffic towards the
-# clients. This is the case when the intercepting device
-# does not fully track connections and fails to forward
-# ICMP must fragment messages to the cache server. If you
-# have such setup and experience that certain clients
-# sporadically hang or never complete requests set
-# disable-pmtu-discovery option to 'transparent'.
-#
-# ssl-bump Intercept each CONNECT request matching ssl_bump ACL,
-# establish secure connection with the client and with
-# the server, decrypt HTTP messages as they pass through
-# Squid, and treat them as unencrypted HTTP messages,
-# becoming the man-in-the-middle.
-#
-# When this option is enabled, additional options become
-# available to specify SSL-related properties of the
-# client-side connection: cert, key, version, cipher,
-# options, clientca, cafile, capath, crlfile, dhparams,
-# sslflags, and sslcontext. See the https_port directive
-# for more information on these options.
-#
-# The ssl_bump option is required to fully enable
-# the SslBump feature.
-#
-# name= Specifies a internal name for the port. Defaults to
-# the port specification (port or addr:port)
-#
-# tcpkeepalive[=idle,interval,timeout]
-# Enable TCP keepalive probes of idle connections.
-# In seconds; idle is the initial time before TCP starts
-# probing the connection, interval how often to probe, and
-# timeout the time before giving up.
-#
-# If you run Squid on a dual-homed machine with an internal
-# and an external interface we recommend you to specify the
-# internal address:port in http_port. This way Squid will only be
-# visible on the internal address.
-#
-#
-
-# Squid normally listens to port 3128
-http_port 3128
-
-# TAG: https_port
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Usage: [ip:]port cert=certificate.pem [key=key.pem] [options...]
-#
-# The socket address where Squid will listen for HTTPS client
-# requests.
-#
-# This is really only useful for situations where you are running
-# squid in accelerator mode and you want to do the SSL work at the
-# accelerator level.
-#
-# You may specify multiple socket addresses on multiple lines,
-# each with their own SSL certificate and/or options.
-#
-# Options:
-#
-# accel Accelerator mode. Also needs at least one of
-# defaultsite or vhost.
-#
-# defaultsite= The name of the https site presented on
-# this port. Implies accel.
-#
-# vhost Accelerator mode using Host header for virtual
-# domain support. Requires a wildcard certificate
-# or other certificate valid for more than one domain.
-# Implies accel.
-#
-# protocol= Protocol to reconstruct accelerated requests with.
-# Defaults to https.
-#
-# cert= Path to SSL certificate (PEM format).
-#
-# key= Path to SSL private key file (PEM format)
-# if not specified, the certificate file is
-# assumed to be a combined certificate and
-# key file.
-#
-# version= The version of SSL/TLS supported
-# 1 automatic (default)
-# 2 SSLv2 only
-# 3 SSLv3 only
-# 4 TLSv1 only
-#
-# cipher= Colon separated list of supported ciphers.
-# NOTE: some ciphers such as EDH ciphers depend on
-# additional settings. If those settings are
-# omitted the ciphers may be silently ignored
-# by the OpenSSL library.
-#
-# options= Various SSL engine options. The most important
-# being:
-# NO_SSLv2 Disallow the use of SSLv2
-# NO_SSLv3 Disallow the use of SSLv3
-# NO_TLSv1 Disallow the use of TLSv1
-# SINGLE_DH_USE Always create a new key when using
-# temporary/ephemeral DH key exchanges
-# See OpenSSL SSL_CTX_set_options documentation for a
-# complete list of options.
-#
-# clientca= File containing the list of CAs to use when
-# requesting a client certificate.
-#
-# cafile= File containing additional CA certificates to
-# use when verifying client certificates. If unset
-# clientca will be used.
-#
-# capath= Directory containing additional CA certificates
-# and CRL lists to use when verifying client certificates.
-#
-# crlfile= File of additional CRL lists to use when verifying
-# the client certificate, in addition to CRLs stored in
-# the capath. Implies VERIFY_CRL flag below.
-#
-# dhparams= File containing DH parameters for temporary/ephemeral
-# DH key exchanges. See OpenSSL documentation for details
-# on how to create this file.
-# WARNING: EDH ciphers will be silently disabled if this
-# option is not set.
-#
-# sslflags= Various flags modifying the use of SSL:
-# DELAYED_AUTH
-# Don't request client certificates
-# immediately, but wait until acl processing
-# requires a certificate (not yet implemented).
-# NO_DEFAULT_CA
-# Don't use the default CA lists built in
-# to OpenSSL.
-# NO_SESSION_REUSE
-# Don't allow for session reuse. Each connection
-# will result in a new SSL session.
-# VERIFY_CRL
-# Verify CRL lists when accepting client
-# certificates.
-# VERIFY_CRL_ALL
-# Verify CRL lists for all certificates in the
-# client certificate chain.
-#
-# sslcontext= SSL session ID context identifier.
-#
-# generate-host-certificates[=<on|off>]
-# Dynamically create SSL server certificates for the
-# destination hosts of bumped CONNECT requests.When
-# enabled, the cert and key options are used to sign
-# generated certificates. Otherwise generated
-# certificate will be selfsigned.
-# If there is CA certificate life time of generated
-# certificate equals lifetime of CA certificate. If
-# generated certificate is selfsigned lifetime is three
-# years.
-# This option is enabled by default when SslBump is used.
-# See the sslBump option above for more information.
-#
-# dynamic_cert_mem_cache_size=SIZE
-# Approximate total RAM size spent on cached generated
-# certificates. If set to zero, caching is disabled. The
-# default value is 4MB. An average XXX-bit certificate
-# consumes about XXX bytes of RAM.
-#
-# vport Accelerator with IP based virtual host support.
-#
-# vport=NN As above, but uses specified port number rather
-# than the https_port number. Implies accel.
-#
-# name= Specifies a internal name for the port. Defaults to
-# the port specification (port or addr:port)
-#
-#Default:
-# none
-
-# TAG: tcp_outgoing_tos
-# Allows you to select a TOS/Diffserv value to mark outgoing
-# connections with, based on the username or source address
-# making the request.
-#
-# tcp_outgoing_tos ds-field [!]aclname ...
-#
-# Example where normal_service_net uses the TOS value 0x00
-# and good_service_net uses 0x20
-#
-# acl normal_service_net src 10.0.0.0/24
-# acl good_service_net src 10.0.1.0/24
-# tcp_outgoing_tos 0x00 normal_service_net
-# tcp_outgoing_tos 0x20 good_service_net
-#
-# TOS/DSCP values really only have local significance - so you should
-# know what you're specifying. For more information, see RFC2474,
-# RFC2475, and RFC3260.
-#
-# The TOS/DSCP byte must be exactly that - a octet value 0 - 255, or
-# "default" to use whatever default your host has. Note that in
-# practice often only multiples of 4 is usable as the two rightmost bits
-# have been redefined for use by ECN (RFC 3168 section 23.1).
-#
-# Processing proceeds in the order specified, and stops at first fully
-# matching line.
-#
-# Note: The use of this directive using client dependent ACLs is
-# incompatible with the use of server side persistent connections. To
-# ensure correct results it is best to set server_persistent_connections
-# to off when using this directive in such configurations.
-#Default:
-# none
-
-# TAG: clientside_tos
-# Allows you to select a TOS/Diffserv value to mark client-side
-# connections with, based on the username or source address
-# making the request.
-#Default:
-# none
-
-# TAG: qos_flows
-# Allows you to select a TOS/DSCP value to mark outgoing
-# connections with, based on where the reply was sourced.
-#
-# TOS values really only have local significance - so you should
-# know what you're specifying. For more information, see RFC2474,
-# RFC2475, and RFC3260.
-#
-# The TOS/DSCP byte must be exactly that - octet value 0x00-0xFF.
-# Note that in practice often only values up to 0x3F are usable
-# as the two highest bits have been redefined for use by ECN
-# (RFC3168).
-#
-# This setting is configured by setting the source TOS values:
-#
-# local-hit=0xFF Value to mark local cache hits.
-#
-# sibling-hit=0xFF Value to mark hits from sibling peers.
-#
-# parent-hit=0xFF Value to mark hits from parent peers.
-#
-#
-# NOTE: 'miss' preserve feature is only possible on Linux at this time.
-#
-# For the following to work correctly, you will need to patch your
-# linux kernel with the TOS preserving ZPH patch.
-# The kernel patch can be downloaded from http://zph.bratcheda.org
-#
-# disable-preserve-miss
-# By default, the existing TOS value of the response coming
-# from the remote server will be retained and masked with
-# miss-mark. This option disables that feature.
-#
-# miss-mask=0xFF
-# Allows you to mask certain bits in the TOS received from the
-# remote server, before copying the value to the TOS sent
-# towards clients.
-# Default: 0xFF (TOS from server is not changed).
-#
-#Default:
-# none
-
-# TAG: tcp_outgoing_address
-# Allows you to map requests to different outgoing IP addresses
-# based on the username or source address of the user making
-# the request.
-#
-# tcp_outgoing_address ipaddr [[!]aclname] ...
-#
-# Example where requests from 10.0.0.0/24 will be forwarded
-# with source address 10.1.0.1, 10.0.2.0/24 forwarded with
-# source address 10.1.0.2 and the rest will be forwarded with
-# source address 10.1.0.3.
-#
-# acl normal_service_net src 10.0.0.0/24
-# acl good_service_net src 10.0.2.0/24
-# tcp_outgoing_address 10.1.0.1 normal_service_net
-# tcp_outgoing_address 10.1.0.2 good_service_net
-# tcp_outgoing_address 10.1.0.3
-#
-# Processing proceeds in the order specified, and stops at first fully
-# matching line.
-#
-# Note: The use of this directive using client dependent ACLs is
-# incompatible with the use of server side persistent connections. To
-# ensure correct results it is best to set server_persistent_connections
-# to off when using this directive in such configurations.
-#
-#
-# IPv6 Magic:
-#
-# Squid is built with a capability of bridging the IPv4 and IPv6
-# internets.
-# tcp_outgoing_address as exampled above breaks this bridging by forcing
-# all outbound traffic through a certain IPv4 which may be on the wrong
-# side of the IPv4/IPv6 boundary.
-#
-# To operate with tcp_outgoing_address and keep the bridging benefits
-# an additional ACL needs to be used which ensures the IPv6-bound traffic
-# is never forced or permitted out the IPv4 interface.
-#
-# # IPv6 destination test along with a dummy access control to perform the required DNS
-# # This MUST be place before any ALLOW rules.
-# acl to_ipv6 dst ipv6
-# http_access deny ipv6 !all
-#
-# tcp_outgoing_address 2001:db8::c001 good_service_net to_ipv6
-# tcp_outgoing_address 10.1.0.2 good_service_net !to_ipv6
-#
-# tcp_outgoing_address 2001:db8::beef normal_service_net to_ipv6
-# tcp_outgoing_address 10.1.0.1 normal_service_net !to_ipv6
-#
-# tcp_outgoing_address 2001:db8::1 to_ipv6
-# tcp_outgoing_address 10.1.0.3 !to_ipv6
-#
-# WARNING:
-# 'dst ipv6' bases its selection assuming DIRECT access.
-# If peers are used the peername ACL are needed to select outgoing
-# address which can link to the peer.
-#
-# 'dst ipv6' is a slow ACL. It will only work here if 'dst' is used
-# previously in the http_access rules to locate the destination IP.
-# Some more magic may be needed for that:
-# http_access allow to_ipv6 !all
-# (meaning, allow if to IPv6 but not from anywhere ;)
-#
-#Default:
-# none
-
-# SSL OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: ssl_unclean_shutdown
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Some browsers (especially MSIE) bugs out on SSL shutdown
-# messages.
-#Default:
-# ssl_unclean_shutdown off
-
-# TAG: ssl_engine
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# The OpenSSL engine to use. You will need to set this if you
-# would like to use hardware SSL acceleration for example.
-#Default:
-# none
-
-# TAG: sslproxy_client_certificate
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Client SSL Certificate to use when proxying https:// URLs
-#Default:
-# none
-
-# TAG: sslproxy_client_key
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Client SSL Key to use when proxying https:// URLs
-#Default:
-# none
-
-# TAG: sslproxy_version
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# SSL version level to use when proxying https:// URLs
-#Default:
-# sslproxy_version 1
-
-# TAG: sslproxy_options
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# SSL engine options to use when proxying https:// URLs
-#
-# The most important being:
-#
-# NO_SSLv2 Disallow the use of SSLv2
-# NO_SSLv3 Disallow the use of SSLv3
-# NO_TLSv1 Disallow the use of TLSv1
-# SINGLE_DH_USE
-# Always create a new key when using
-# temporary/ephemeral DH key exchanges
-#
-# These options vary depending on your SSL engine.
-# See the OpenSSL SSL_CTX_set_options documentation for a
-# complete list of possible options.
-#Default:
-# none
-
-# TAG: sslproxy_cipher
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# SSL cipher list to use when proxying https:// URLs
-#
-# Colon separated list of supported ciphers.
-#Default:
-# none
-
-# TAG: sslproxy_cafile
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# file containing CA certificates to use when verifying server
-# certificates while proxying https:// URLs
-#Default:
-# none
-
-# TAG: sslproxy_capath
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# directory containing CA certificates to use when verifying
-# server certificates while proxying https:// URLs
-#Default:
-# none
-
-# TAG: ssl_bump
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# This ACL controls which CONNECT requests to an http_port
-# marked with an sslBump flag are actually "bumped". Please
-# see the sslBump flag of an http_port option for more details
-# about decoding proxied SSL connections.
-#
-# By default, no requests are bumped.
-#
-# See also: http_port ssl-bump
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-#
-# # Example: Bump all requests except those originating from localhost and
-# # those going to webax.com or example.com sites.
-#
-# acl localhost src 127.0.0.1/32
-# acl broken_sites dstdomain .webax.com
-# acl broken_sites dstdomain .example.com
-# ssl_bump deny localhost
-# ssl_bump deny broken_sites
-# ssl_bump allow all
-#Default:
-# none
-
-# TAG: sslproxy_flags
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Various flags modifying the use of SSL while proxying https:// URLs:
-# DONT_VERIFY_PEER Accept certificates that fail verification.
-# For refined control, see sslproxy_cert_error.
-# NO_DEFAULT_CA Don't use the default CA list built in
-# to OpenSSL.
-#Default:
-# none
-
-# TAG: sslproxy_cert_error
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Use this ACL to bypass server certificate validation errors.
-#
-# For example, the following lines will bypass all validation errors
-# when talking to servers located at 172.16.0.0/16. All other
-# validation errors will result in ERR_SECURE_CONNECT_FAIL error.
-#
-# acl BrokenServersAtTrustedIP dst 172.16.0.0/16
-# sslproxy_cert_error allow BrokenServersAtTrustedIP
-# sslproxy_cert_error deny all
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-# Using slow acl types may result in server crashes
-#
-# Without this option, all server certificate validation errors
-# terminate the transaction. Bypassing validation errors is dangerous
-# because an error usually implies that the server cannot be trusted and
-# the connection may be insecure.
-#
-# See also: sslproxy_flags and DONT_VERIFY_PEER.
-#
-# Default setting: sslproxy_cert_error deny all
-#Default:
-# none
-
-# TAG: sslpassword_program
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ssl option
-#
-# Specify a program used for entering SSL key passphrases
-# when using encrypted SSL certificate keys. If not specified
-# keys must either be unencrypted, or Squid started with the -N
-# option to allow it to query interactively for the passphrase.
-#
-# The key file name is given as argument to the program allowing
-# selection of the right password if you have multiple encrypted
-# keys.
-#Default:
-# none
-
-#OPTIONS RELATING TO EXTERNAL SSL_CRTD
-#-----------------------------------------------------------------------------
-
-# TAG: sslcrtd_program
-# Note: This option is only available if Squid is rebuilt with the
-# -DUSE_SSL_CRTD define
-#
-# Specify the location and options of the executable for ssl_crtd process.
-# /usr/lib/squid3/ssl_crtd program requires -s and -M parameters
-# For more information use:
-# /usr/lib/squid3/ssl_crtd -h
-#Default:
-# sslcrtd_program /usr/lib/squid3/ssl_crtd -s /var/lib/ssl_db -M 4MB
-
-# TAG: sslcrtd_children
-# Note: This option is only available if Squid is rebuilt with the
-# -DUSE_SSL_CRTD define
-#
-# The maximum number of processes spawn to service ssl server.
-# The maximum this may be safely set to is 32.
-#
-# You must have at least one ssl_crtd process.
-#Default:
-# sslcrtd_children 5
-
-# OPTIONS WHICH AFFECT THE NEIGHBOR SELECTION ALGORITHM
-# -----------------------------------------------------------------------------
-
-# TAG: cache_peer
-# To specify other caches in a hierarchy, use the format:
-#
-# cache_peer hostname type http-port icp-port [options]
-#
-# For example,
-#
-# # proxy icp
-# # hostname type port port options
-# # -------------------- -------- ----- ----- -----------
-# cache_peer parent.foo.net parent 3128 3130 default
-# cache_peer sib1.foo.net sibling 3128 3130 proxy-only
-# cache_peer sib2.foo.net sibling 3128 3130 proxy-only
-# cache_peer example.com parent 80 0 default
-# cache_peer cdn.example.com sibling 3128 0
-#
-# type: either 'parent', 'sibling', or 'multicast'.
-#
-# proxy-port: The port number where the peer accept HTTP requests.
-# For other Squid proxies this is usually 3128
-# For web servers this is usually 80
-#
-# icp-port: Used for querying neighbor caches about objects.
-# Set to 0 if the peer does not support ICP or HTCP.
-# See ICP and HTCP options below for additional details.
-#
-#
-# ==== ICP OPTIONS ====
-#
-# You MUST also set icp_port and icp_access explicitly when using these options.
-# The defaults will prevent peer traffic using ICP.
-#
-#
-# no-query Disable ICP queries to this neighbor.
-#
-# multicast-responder
-# Indicates the named peer is a member of a multicast group.
-# ICP queries will not be sent directly to the peer, but ICP
-# replies will be accepted from it.
-#
-# closest-only Indicates that, for ICP_OP_MISS replies, we'll only forward
-# CLOSEST_PARENT_MISSes and never FIRST_PARENT_MISSes.
-#
-# background-ping
-# To only send ICP queries to this neighbor infrequently.
-# This is used to keep the neighbor round trip time updated
-# and is usually used in conjunction with weighted-round-robin.
-#
-#
-# ==== HTCP OPTIONS ====
-#
-# You MUST also set htcp_port and htcp_access explicitly when using these options.
-# The defaults will prevent peer traffic using HTCP.
-#
-#
-# htcp Send HTCP, instead of ICP, queries to the neighbor.
-# You probably also want to set the "icp-port" to 4827
-# instead of 3130.
-#
-# htcp-oldsquid Send HTCP to old Squid versions.
-#
-# htcp-no-clr Send HTCP to the neighbor but without
-# sending any CLR requests. This cannot be used with
-# htcp-only-clr.
-#
-# htcp-only-clr Send HTCP to the neighbor but ONLY CLR requests.
-# This cannot be used with htcp-no-clr.
-#
-# htcp-no-purge-clr
-# Send HTCP to the neighbor including CLRs but only when
-# they do not result from PURGE requests.
-#
-# htcp-forward-clr
-# Forward any HTCP CLR requests this proxy receives to the peer.
-#
-#
-# ==== PEER SELECTION METHODS ====
-#
-# The default peer selection method is ICP, with the first responding peer
-# being used as source. These options can be used for better load balancing.
-#
-#
-# default This is a parent cache which can be used as a "last-resort"
-# if a peer cannot be located by any of the peer-selection methods.
-# If specified more than once, only the first is used.
-#
-# round-robin Load-Balance parents which should be used in a round-robin
-# fashion in the absence of any ICP queries.
-# weight=N can be used to add bias.
-#
-# weighted-round-robin
-# Load-Balance parents which should be used in a round-robin
-# fashion with the frequency of each parent being based on the
-# round trip time. Closer parents are used more often.
-# Usually used for background-ping parents.
-# weight=N can be used to add bias.
-#
-# carp Load-Balance parents which should be used as a CARP array.
-# The requests will be distributed among the parents based on the
-# CARP load balancing hash function based on their weight.
-#
-# userhash Load-balance parents based on the client proxy_auth or ident username.
-#
-# sourcehash Load-balance parents based on the client source IP.
-#
-# multicast-siblings
-# To be used only for cache peers of type "multicast".
-# ALL members of this multicast group have "sibling"
-# relationship with it, not "parent". This is to a multicast
-# group when the requested object would be fetched only from
-# a "parent" cache, anyway. It's useful, e.g., when
-# configuring a pool of redundant Squid proxies, being
-# members of the same multicast group.
-#
-#
-# ==== PEER SELECTION OPTIONS ====
-#
-# weight=N use to affect the selection of a peer during any weighted
-# peer-selection mechanisms.
-# The weight must be an integer; default is 1,
-# larger weights are favored more.
-# This option does not affect parent selection if a peering
-# protocol is not in use.
-#
-# basetime=N Specify a base amount to be subtracted from round trip
-# times of parents.
-# It is subtracted before division by weight in calculating
-# which parent to fectch from. If the rtt is less than the
-# base time the rtt is set to a minimal value.
-#
-# ttl=N Specify a TTL to use when sending multicast ICP queries
-# to this address.
-# Only useful when sending to a multicast group.
-# Because we don't accept ICP replies from random
-# hosts, you must configure other group members as
-# peers with the 'multicast-responder' option.
-#
-# no-delay To prevent access to this neighbor from influencing the
-# delay pools.
-#
-# digest-url=URL Tell Squid to fetch the cache digest (if digests are
-# enabled) for this host from the specified URL rather
-# than the Squid default location.
-#
-#
-# ==== ACCELERATOR / REVERSE-PROXY OPTIONS ====
-#
-# originserver Causes this parent to be contacted as an origin server.
-# Meant to be used in accelerator setups when the peer
-# is a web server.
-#
-# forceddomain=name
-# Set the Host header of requests forwarded to this peer.
-# Useful in accelerator setups where the server (peer)
-# expects a certain domain name but clients may request
-# others. ie example.com or www.example.com
-#
-# no-digest Disable request of cache digests.
-#
-# no-netdb-exchange
-# Disables requesting ICMP RTT database (NetDB).
-#
-#
-# ==== AUTHENTICATION OPTIONS ====
-#
-# login=user:password
-# If this is a personal/workgroup proxy and your parent
-# requires proxy authentication.
-#
-# Note: The string can include URL escapes (i.e. %20 for
-# spaces). This also means % must be written as %%.
-#
-# login=PROXYPASS
-# Send login details received from client to this peer.
-# Authentication is not required, nor changed.
-#
-# Note: This will pass any form of authentication but
-# only Basic auth will work through a proxy unless the
-# connection-auth options are also used.
-#
-# login=PASS Send login details received from client to this peer.
-# Authentication is not required by this option.
-# If there are no client-provided authentication headers
-# to pass on, but username and password are available
-# from either proxy login or an external ACL user= and
-# password= result tags they may be sent instead.
-#
-# Note: To combine this with proxy_auth both proxies must
-# share the same user database as HTTP only allows for
-# a single login (one for proxy, one for origin server).
-# Also be warned this will expose your users proxy
-# password to the peer. USE WITH CAUTION
-#
-# login=*:password
-# Send the username to the upstream cache, but with a
-# fixed password. This is meant to be used when the peer
-# is in another administrative domain, but it is still
-# needed to identify each user.
-# The star can optionally be followed by some extra
-# information which is added to the username. This can
-# be used to identify this proxy to the peer, similar to
-# the login=username:password option above.
-#
-# connection-auth=on|off
-# Tell Squid that this peer does or not support Microsoft
-# connection oriented authentication, and any such
-# challenges received from there should be ignored.
-# Default is auto to automatically determine the status
-# of the peer.
-#
-#
-# ==== SSL / HTTPS / TLS OPTIONS ====
-#
-# ssl Encrypt connections to this peer with SSL/TLS.
-#
-# sslcert=/path/to/ssl/certificate
-# A client SSL certificate to use when connecting to
-# this peer.
-#
-# sslkey=/path/to/ssl/key
-# The private SSL key corresponding to sslcert above.
-# If 'sslkey' is not specified 'sslcert' is assumed to
-# reference a combined file containing both the
-# certificate and the key.
-#
-# sslversion=1|2|3|4
-# The SSL version to use when connecting to this peer
-# 1 = automatic (default)
-# 2 = SSL v2 only
-# 3 = SSL v3 only
-# 4 = TLS v1 only
-#
-# sslcipher=... The list of valid SSL ciphers to use when connecting
-# to this peer.
-#
-# ssloptions=... Specify various SSL engine options:
-# NO_SSLv2 Disallow the use of SSLv2
-# NO_SSLv3 Disallow the use of SSLv3
-# NO_TLSv1 Disallow the use of TLSv1
-# See src/ssl_support.c or the OpenSSL documentation for
-# a more complete list.
-#
-# sslcafile=... A file containing additional CA certificates to use
-# when verifying the peer certificate.
-#
-# sslcapath=... A directory containing additional CA certificates to
-# use when verifying the peer certificate.
-#
-# sslcrlfile=... A certificate revocation list file to use when
-# verifying the peer certificate.
-#
-# sslflags=... Specify various flags modifying the SSL implementation:
-#
-# DONT_VERIFY_PEER
-# Accept certificates even if they fail to
-# verify.
-# NO_DEFAULT_CA
-# Don't use the default CA list built in
-# to OpenSSL.
-# DONT_VERIFY_DOMAIN
-# Don't verify the peer certificate
-# matches the server name
-#
-# ssldomain= The peer name as advertised in it's certificate.
-# Used for verifying the correctness of the received peer
-# certificate. If not specified the peer hostname will be
-# used.
-#
-# front-end-https
-# Enable the "Front-End-Https: On" header needed when
-# using Squid as a SSL frontend in front of Microsoft OWA.
-# See MS KB document Q307347 for details on this header.
-# If set to auto the header will only be added if the
-# request is forwarded as a https:// URL.
-#
-#
-# ==== GENERAL OPTIONS ====
-#
-# connect-timeout=N
-# A peer-specific connect timeout.
-# Also see the peer_connect_timeout directive.
-#
-# connect-fail-limit=N
-# How many times connecting to a peer must fail before
-# it is marked as down. Default is 10.
-#
-# allow-miss Disable Squid's use of only-if-cached when forwarding
-# requests to siblings. This is primarily useful when
-# icp_hit_stale is used by the sibling. To extensive use
-# of this option may result in forwarding loops, and you
-# should avoid having two-way peerings with this option.
-# For example to deny peer usage on requests from peer
-# by denying cache_peer_access if the source is a peer.
-#
-# max-conn=N Limit the amount of connections Squid may open to this
-# peer. see also
-#
-# name=xxx Unique name for the peer.
-# Required if you have multiple peers on the same host
-# but different ports.
-# This name can be used in cache_peer_access and similar
-# directives to dentify the peer.
-# Can be used by outgoing access controls through the
-# peername ACL type.
-#
-# no-tproxy Do not use the client-spoof TPROXY support when forwarding
-# requests to this peer. Use normal address selection instead.
-#
-# proxy-only objects fetched from the peer will not be stored locally.
-#
-#Default:
-# none
-
-# TAG: cache_peer_domain
-# Use to limit the domains for which a neighbor cache will be
-# queried. Usage:
-#
-# cache_peer_domain cache-host domain [domain ...]
-# cache_peer_domain cache-host !domain
-#
-# For example, specifying
-#
-# cache_peer_domain parent.foo.net .edu
-#
-# has the effect such that UDP query packets are sent to
-# 'bigserver' only when the requested object exists on a
-# server in the .edu domain. Prefixing the domainname
-# with '!' means the cache will be queried for objects
-# NOT in that domain.
-#
-# NOTE: * Any number of domains may be given for a cache-host,
-# either on the same or separate lines.
-# * When multiple domains are given for a particular
-# cache-host, the first matched domain is applied.
-# * Cache hosts with no domain restrictions are queried
-# for all requests.
-# * There are no defaults.
-# * There is also a 'cache_peer_access' tag in the ACL
-# section.
-#Default:
-# none
-
-# TAG: cache_peer_access
-# Similar to 'cache_peer_domain' but provides more flexibility by
-# using ACL elements.
-#
-# cache_peer_access cache-host allow|deny [!]aclname ...
-#
-# The syntax is identical to 'http_access' and the other lists of
-# ACL elements. See the comments for 'http_access' below, or
-# the Squid FAQ (http://wiki.squid-cache.org/SquidFaq/SquidAcl).
-#Default:
-# none
-
-# TAG: neighbor_type_domain
-# usage: neighbor_type_domain neighbor parent|sibling domain domain ...
-#
-# Modifying the neighbor type for specific domains is now
-# possible. You can treat some domains differently than the the
-# default neighbor type specified on the 'cache_peer' line.
-# Normally it should only be necessary to list domains which
-# should be treated differently because the default neighbor type
-# applies for hostnames which do not match domains listed here.
-#
-#EXAMPLE:
-# cache_peer cache.foo.org parent 3128 3130
-# neighbor_type_domain cache.foo.org sibling .com .net
-# neighbor_type_domain cache.foo.org sibling .au .de
-#Default:
-# none
-
-# TAG: dead_peer_timeout (seconds)
-# This controls how long Squid waits to declare a peer cache
-# as "dead." If there are no ICP replies received in this
-# amount of time, Squid will declare the peer dead and not
-# expect to receive any further ICP replies. However, it
-# continues to send ICP queries, and will mark the peer as
-# alive upon receipt of the first subsequent ICP reply.
-#
-# This timeout also affects when Squid expects to receive ICP
-# replies from peers. If more than 'dead_peer' seconds have
-# passed since the last ICP reply was received, Squid will not
-# expect to receive an ICP reply on the next query. Thus, if
-# your time between requests is greater than this timeout, you
-# will see a lot of requests sent DIRECT to origin servers
-# instead of to your parents.
-#Default:
-# dead_peer_timeout 10 seconds
-
-# TAG: forward_max_tries
-# Controls how many different forward paths Squid will try
-# before giving up. See also forward_timeout.
-#Default:
-# forward_max_tries 10
-
-# TAG: hierarchy_stoplist
-# A list of words which, if found in a URL, cause the object to
-# be handled directly by this cache. In other words, use this
-# to not query neighbor caches for certain objects. You may
-# list this option multiple times.
-#
-# Example:
-# hierarchy_stoplist cgi-bin ?
-#
-# Note: never_direct overrides this option.
-#Default:
-# none
-
-# MEMORY CACHE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: cache_mem (bytes)
-# NOTE: THIS PARAMETER DOES NOT SPECIFY THE MAXIMUM PROCESS SIZE.
-# IT ONLY PLACES A LIMIT ON HOW MUCH ADDITIONAL MEMORY SQUID WILL
-# USE AS A MEMORY CACHE OF OBJECTS. SQUID USES MEMORY FOR OTHER
-# THINGS AS WELL. SEE THE SQUID FAQ SECTION 8 FOR DETAILS.
-#
-# 'cache_mem' specifies the ideal amount of memory to be used
-# for:
-# * In-Transit objects
-# * Hot Objects
-# * Negative-Cached objects
-#
-# Data for these objects are stored in 4 KB blocks. This
-# parameter specifies the ideal upper limit on the total size of
-# 4 KB blocks allocated. In-Transit objects take the highest
-# priority.
-#
-# In-transit objects have priority over the others. When
-# additional space is needed for incoming data, negative-cached
-# and hot objects will be released. In other words, the
-# negative-cached and hot objects will fill up any unused space
-# not needed for in-transit objects.
-#
-# If circumstances require, this limit will be exceeded.
-# Specifically, if your incoming request rate requires more than
-# 'cache_mem' of memory to hold in-transit objects, Squid will
-# exceed this limit to satisfy the new requests. When the load
-# decreases, blocks will be freed until the high-water mark is
-# reached. Thereafter, blocks will be used to store hot
-# objects.
-#Default:
-# cache_mem 256 MB
-
-# TAG: maximum_object_size_in_memory (bytes)
-# Objects greater than this size will not be attempted to kept in
-# the memory cache. This should be set high enough to keep objects
-# accessed frequently in memory to improve performance whilst low
-# enough to keep larger objects from hoarding cache_mem.
-#Default:
-# maximum_object_size_in_memory 512 KB
-
-# TAG: memory_replacement_policy
-# The memory replacement policy parameter determines which
-# objects are purged from memory when memory space is needed.
-#
-# See cache_replacement_policy for details.
-#Default:
-# memory_replacement_policy lru
-
-# DISK CACHE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: cache_replacement_policy
-# The cache replacement policy parameter determines which
-# objects are evicted (replaced) when disk space is needed.
-#
-# lru : Squid's original list based LRU policy
-# heap GDSF : Greedy-Dual Size Frequency
-# heap LFUDA: Least Frequently Used with Dynamic Aging
-# heap LRU : LRU policy implemented using a heap
-#
-# Applies to any cache_dir lines listed below this.
-#
-# The LRU policies keeps recently referenced objects.
-#
-# The heap GDSF policy optimizes object hit rate by keeping smaller
-# popular objects in cache so it has a better chance of getting a
-# hit. It achieves a lower byte hit rate than LFUDA though since
-# it evicts larger (possibly popular) objects.
-#
-# The heap LFUDA policy keeps popular objects in cache regardless of
-# their size and thus optimizes byte hit rate at the expense of
-# hit rate since one large, popular object will prevent many
-# smaller, slightly less popular objects from being cached.
-#
-# Both policies utilize a dynamic aging mechanism that prevents
-# cache pollution that can otherwise occur with frequency-based
-# replacement policies.
-#
-# NOTE: if using the LFUDA replacement policy you should increase
-# the value of maximum_object_size above its default of 4096 KB to
-# to maximize the potential byte hit rate improvement of LFUDA.
-#
-# For more information about the GDSF and LFUDA cache replacement
-# policies see http://www.hpl.hp.com/techreports/1999/HPL-1999-69.html
-# and http://fog.hpl.external.hp.com/techreports/98/HPL-98-173.html.
-#Default:
-# cache_replacement_policy lru
-
-# TAG: cache_dir
-# Usage:
-#
-# cache_dir Type Directory-Name Fs-specific-data [options]
-#
-# You can specify multiple cache_dir lines to spread the
-# cache among different disk partitions.
-#
-# Type specifies the kind of storage system to use. Only "ufs"
-# is built by default. To enable any of the other storage systems
-# see the --enable-storeio configure option.
-#
-# 'Directory' is a top-level directory where cache swap
-# files will be stored. If you want to use an entire disk
-# for caching, this can be the mount-point directory.
-# The directory must exist and be writable by the Squid
-# process. Squid will NOT create this directory for you.
-#
-# The ufs store type:
-#
-# "ufs" is the old well-known Squid storage format that has always
-# been there.
-#
-# cache_dir ufs Directory-Name Mbytes L1 L2 [options]
-#
-# 'Mbytes' is the amount of disk space (MB) to use under this
-# directory. The default is 100 MB. Change this to suit your
-# configuration. Do NOT put the size of your disk drive here.
-# Instead, if you want Squid to use the entire disk drive,
-# subtract 20% and use that value.
-#
-# 'L1' is the number of first-level subdirectories which
-# will be created under the 'Directory'. The default is 16.
-#
-# 'L2' is the number of second-level subdirectories which
-# will be created under each first-level directory. The default
-# is 256.
-#
-# The aufs store type:
-#
-# "aufs" uses the same storage format as "ufs", utilizing
-# POSIX-threads to avoid blocking the main Squid process on
-# disk-I/O. This was formerly known in Squid as async-io.
-#
-# cache_dir aufs Directory-Name Mbytes L1 L2 [options]
-#
-# see argument descriptions under ufs above
-#
-# The diskd store type:
-#
-# "diskd" uses the same storage format as "ufs", utilizing a
-# separate process to avoid blocking the main Squid process on
-# disk-I/O.
-#
-# cache_dir diskd Directory-Name Mbytes L1 L2 [options] [Q1=n] [Q2=n]
-#
-# see argument descriptions under ufs above
-#
-# Q1 specifies the number of unacknowledged I/O requests when Squid
-# stops opening new files. If this many messages are in the queues,
-# Squid won't open new files. Default is 64
-#
-# Q2 specifies the number of unacknowledged messages when Squid
-# starts blocking. If this many messages are in the queues,
-# Squid blocks until it receives some replies. Default is 72
-#
-# When Q1 < Q2 (the default), the cache directory is optimized
-# for lower response time at the expense of a decrease in hit
-# ratio. If Q1 > Q2, the cache directory is optimized for
-# higher hit ratio at the expense of an increase in response
-# time.
-#
-# The coss store type:
-#
-# NP: COSS filesystem in Squid-3 has been deemed too unstable for
-# production use and has thus been removed from this release.
-# We hope that it can be made usable again soon.
-#
-# block-size=n defines the "block size" for COSS cache_dir's.
-# Squid uses file numbers as block numbers. Since file numbers
-# are limited to 24 bits, the block size determines the maximum
-# size of the COSS partition. The default is 512 bytes, which
-# leads to a maximum cache_dir size of 512<<24, or 8 GB. Note
-# you should not change the coss block size after Squid
-# has written some objects to the cache_dir.
-#
-# The coss file store has changed from 2.5. Now it uses a file
-# called 'stripe' in the directory names in the config - and
-# this will be created by squid -z.
-#
-# Common options:
-#
-# no-store, no new objects should be stored to this cache_dir
-#
-# max-size=n, refers to the max object size in bytes this cache_dir
-# supports. It is used to select the cache_dir to store the object.
-# Note: To make optimal use of the max-size limits you should order
-# the cache_dir lines with the smallest max-size value first and the
-# ones with no max-size specification last.
-#
-# Note for coss, max-size must be less than COSS_MEMBUF_SZ,
-# which can be changed with the --with-coss-membuf-size=N configure
-# option.
-#
-
-# Uncomment and adjust the following to add a disk cache directory.
-#cache_dir ufs /var/spool/squid3 100 16 256
-cache_dir ufs /var/spool/squid3 16384 16 1024
-
-# TAG: store_dir_select_algorithm
-# Set this to 'round-robin' as an alternative.
-#Default:
-# store_dir_select_algorithm least-load
-
-# TAG: max_open_disk_fds
-# To avoid having disk as the I/O bottleneck Squid can optionally
-# bypass the on-disk cache if more than this amount of disk file
-# descriptors are open.
-#
-# A value of 0 indicates no limit.
-#Default:
-# max_open_disk_fds 0
-
-# TAG: minimum_object_size (bytes)
-# Objects smaller than this size will NOT be saved on disk. The
-# value is specified in kilobytes, and the default is 0 KB, which
-# means there is no minimum.
-#Default:
-# minimum_object_size 0 KB
-
-# TAG: maximum_object_size (bytes)
-# Objects larger than this size will NOT be saved on disk. The
-# value is specified in kilobytes, and the default is 4MB. If
-# you wish to get a high BYTES hit ratio, you should probably
-# increase this (one 32 MB object hit counts for 3200 10KB
-# hits). If you wish to increase speed more than your want to
-# save bandwidth you should leave this low.
-#
-# NOTE: if using the LFUDA replacement policy you should increase
-# this value to maximize the byte hit rate improvement of LFUDA!
-# See replacement_policy below for a discussion of this policy.
-#Default:
-# maximum_object_size 4096 KB
-maximum_object_size 153600 KB
-
-# TAG: cache_swap_low (percent, 0-100)
-#Default:
-# cache_swap_low 90
-
-# TAG: cache_swap_high (percent, 0-100)
-#
-# The low- and high-water marks for cache object replacement.
-# Replacement begins when the swap (disk) usage is above the
-# low-water mark and attempts to maintain utilization near the
-# low-water mark. As swap utilization gets close to high-water
-# mark object eviction becomes more aggressive. If utilization is
-# close to the low-water mark less replacement is done each time.
-#
-# Defaults are 90% and 95%. If you have a large cache, 5% could be
-# hundreds of MB. If this is the case you may wish to set these
-# numbers closer together.
-#Default:
-# cache_swap_high 95
-
-# LOGFILE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: logformat
-# Usage:
-#
-# logformat <name> <format specification>
-#
-# Defines an access log format.
-#
-# The <format specification> is a string with embedded % format codes
-#
-# % format codes all follow the same basic structure where all but
-# the formatcode is optional. Output strings are automatically escaped
-# as required according to their context and the output format
-# modifiers are usually not needed, but can be specified if an explicit
-# output format is desired.
-#
-# % ["|[|'|#] [-] [[0]width] [{argument}] formatcode
-#
-# " output in quoted string format
-# [ output in squid text log format as used by log_mime_hdrs
-# # output in URL quoted format
-# ' output as-is
-#
-# - left aligned
-# width field width. If starting with 0 the
-# output is zero padded
-# {arg} argument such as header name etc
-#
-# Format codes:
-#
-# % a literal % character
-# >a Client source IP address
-# >A Client FQDN
-# >p Client source port
-# <A Server IP address or peer name
-# la Local IP address (http_port)
-# lp Local port number (http_port)
-# <la Local IP address of the last server or peer connection
-# <lp Local port number of the last server or peer connection
-# ts Seconds since epoch
-# tu subsecond time (milliseconds)
-# tl Local time. Optional strftime format argument
-# default %d/%b/%Y:%H:%M:%S %z
-# tg GMT time. Optional strftime format argument
-# default %d/%b/%Y:%H:%M:%S %z
-# tr Response time (milliseconds)
-# dt Total time spent making DNS lookups (milliseconds)
-#
-# HTTP cache related format codes:
-#
-# [http::]>h Original request header. Optional header name argument
-# on the format header[:[separator]element]
-# [http::]>ha The HTTP request headers after adaptation and redirection.
-# Optional header name argument as for >h
-# [http::]<h Reply header. Optional header name argument
-# as for >h
-# [http::]un User name
-# [http::]ul User name from authentication
-# [http::]ui User name from ident
-# [http::]us User name from SSL
-# [http::]ue User name from external acl helper
-# [http::]>Hs HTTP status code sent to the client
-# [http::]<Hs HTTP status code received from the next hop
-# [http::]Ss Squid request status (TCP_MISS etc)
-# [http::]Sh Squid hierarchy status (DEFAULT_PARENT etc)
-# [http::]mt MIME content type
-# [http::]rm Request method (GET/POST etc)
-# [http::]ru Request URL
-# [http::]rp Request URL-Path excluding hostname
-# [http::]rv Request protocol version
-# [http::]et Tag returned by external acl
-# [http::]ea Log string returned by external acl
-# [http::]<st Sent reply size including HTTP headers
-# [http::]>st Received request size including HTTP headers. In the
-# case of chunked requests the chunked encoding metadata
-# are not included
-# [http::]>sh Received HTTP request headers size
-# [http::]<sh Sent HTTP reply headers size
-# [http::]st Request+Reply size including HTTP headers
-# [http::]<sH Reply high offset sent
-# [http::]<sS Upstream object size
-# [http::]<pt Peer response time in milliseconds. The timer starts
-# when the last request byte is sent to the next hop
-# and stops when the last response byte is received.
-# [http::]<tt Total server-side time in milliseconds. The timer
-# starts with the first connect request (or write I/O)
-# sent to the first selected peer. The timer stops
-# with the last I/O with the last peer.
-#
-# If ICAP is enabled, the following two codes become available (as
-# well as ICAP log codes documented with the icap_log option):
-#
-# icap::tt Total ICAP processing time for the HTTP
-# transaction. The timer ticks when ICAP
-# ACLs are checked and when ICAP
-# transaction is in progress.
-#
-# icap::<last_h The header of the last ICAP response
-# related to the HTTP transaction. Like
-# <h, accepts an optional header name
-# argument. Will not change semantics
-# when multiple ICAP transactions per HTTP
-# transaction are supported.
-#
-# If adaptation is enabled the following two codes become available:
-#
-# adapt::sum_trs Summed adaptation transaction response
-# times recorded as a comma-separated list in
-# the order of transaction start time. Each time
-# value is recorded as an integer number,
-# representing response time of one or more
-# adaptation (ICAP or eCAP) transaction in
-# milliseconds. When a failed transaction is
-# being retried or repeated, its time is not
-# logged individually but added to the
-# replacement (next) transaction. See also:
-# adapt::all_trs.
-#
-# adapt::all_trs All adaptation transaction response times.
-# Same as adaptation_strs but response times of
-# individual transactions are never added
-# together. Instead, all transaction response
-# times are recorded individually.
-#
-# You can prefix adapt::*_trs format codes with adaptation
-# service name in curly braces to record response time(s) specific
-# to that service. For example: %{my_service}adapt::sum_trs
-#
-# The default formats available (which do not need re-defining) are:
-#
-#logformat squid %ts.%03tu %6tr %>a %Ss/%03>Hs %<st %rm %ru %un %Sh/%<A %mt
-#logformat squidmime %ts.%03tu %6tr %>a %Ss/%03>Hs %<st %rm %ru %un %Sh/%<A %mt [%>h] [%<h]
-#logformat common %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %>Hs %<st %Ss:%Sh
-#logformat combined %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %>Hs %<st "%{Referer}>h" "%{User-Agent}>h" %Ss:%Sh
-#Default:
-# none
-
-# TAG: access_log
-# These files log client request activities. Has a line every HTTP or
-# ICP request. The format is:
-# access_log <filepath> [<logformat name> [acl acl ...]]
-# access_log none [acl acl ...]]
-#
-# Will log to the specified file using the specified format (which
-# must be defined in a logformat directive) those entries which match
-# ALL the acl's specified (which must be defined in acl clauses).
-#
-# If no acl is specified, all requests will be logged to this file.
-#
-# To disable logging of a request use the filepath "none", in which case
-# a logformat name should not be specified.
-#
-# To log the request via syslog specify a filepath of "syslog":
-#
-# access_log syslog[:facility.priority] [format [acl1 [acl2 ....]]]
-# where facility could be any of:
-# authpriv, daemon, local0 .. local7 or user.
-#
-# And priority could be any of:
-# err, warning, notice, info, debug.
-#
-# Default:
-# access_log /var/log/squid3/access.log squid
-#Default:
-# access_log /var/log/squid3/access.log squid
-
-# TAG: icap_log
-# ICAP log files record ICAP transaction summaries, one line per
-# transaction.
-#
-# The icap_log option format is:
-# icap_log <filepath> [<logformat name> [acl acl ...]]
-# icap_log none [acl acl ...]]
-#
-# Please see access_log option documentation for details. The two
-# kinds of logs share the overall configuration approach and many
-# features.
-#
-# ICAP processing of a single HTTP message or transaction may
-# require multiple ICAP transactions. In such cases, multiple
-# ICAP transaction log lines will correspond to a single access
-# log line.
-#
-# ICAP log uses logformat codes that make sense for an ICAP
-# transaction. Header-related codes are applied to the HTTP header
-# embedded in an ICAP server response, with the following caveats:
-# For REQMOD, there is no HTTP response header unless the ICAP
-# server performed request satisfaction. For RESPMOD, the HTTP
-# request header is the header sent to the ICAP server. For
-# OPTIONS, there are no HTTP headers.
-#
-# The following format codes are also available for ICAP logs:
-#
-# icap::<A ICAP server IP address. Similar to <A.
-#
-# icap::<service_name ICAP service name from the icap_service
-# option in Squid configuration file.
-#
-# icap::ru ICAP Request-URI. Similar to ru.
-#
-# icap::rm ICAP request method (REQMOD, RESPMOD, or
-# OPTIONS). Similar to existing rm.
-#
-# icap::>st Bytes sent to the ICAP server (TCP payload
-# only; i.e., what Squid writes to the socket).
-#
-# icap::<st Bytes received from the ICAP server (TCP
-# payload only; i.e., what Squid reads from
-# the socket).
-#
-# icap::tr Transaction response time (in
-# milliseconds). The timer starts when
-# the ICAP transaction is created and
-# stops when the transaction is completed.
-# Similar to tr.
-#
-# icap::tio Transaction I/O time (in milliseconds). The
-# timer starts when the first ICAP request
-# byte is scheduled for sending. The timers
-# stops when the last byte of the ICAP response
-# is received.
-#
-# icap::to Transaction outcome: ICAP_ERR* for all
-# transaction errors, ICAP_OPT for OPTION
-# transactions, ICAP_ECHO for 204
-# responses, ICAP_MOD for message
-# modification, and ICAP_SAT for request
-# satisfaction. Similar to Ss.
-#
-# icap::Hs ICAP response status code. Similar to Hs.
-#
-# icap::>h ICAP request header(s). Similar to >h.
-#
-# icap::<h ICAP response header(s). Similar to <h.
-#
-# The default ICAP log format, which can be used without an explicit
-# definition, is called icap_squid:
-#
-#logformat icap_squid %ts.%03tu %6icap::tr %>a %icap::to/%03icap::Hs %icap::<size %icap::rm %icap::ru% %un -/%icap::<A -
-#
-# See also: logformat, log_icap, and %icap::<last_h
-#Default:
-# none
-
-# TAG: log_access allow|deny acl acl...
-# This options allows you to control which requests gets logged
-# to access.log (see access_log directive). Requests denied for
-# logging will also not be accounted for in performance counters.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# none
-
-# TAG: log_icap
-# This options allows you to control which requests get logged
-# to icap.log. See the icap_log directive for ICAP log details.
-#Default:
-# none
-
-# TAG: cache_store_log
-# Logs the activities of the storage manager. Shows which
-# objects are ejected from the cache, and which objects are
-# saved and for how long. To disable, enter "none" or remove the line.
-# There are not really utilities to analyze this data, so you can safely
-# disable it.
-#
-# Example:
-# cache_store_log /var/log/squid3/store.log
-#Default:
-# none
-
-# TAG: cache_swap_state
-# Location for the cache "swap.state" file. This index file holds
-# the metadata of objects saved on disk. It is used to rebuild
-# the cache during startup. Normally this file resides in each
-# 'cache_dir' directory, but you may specify an alternate
-# pathname here. Note you must give a full filename, not just
-# a directory. Since this is the index for the whole object
-# list you CANNOT periodically rotate it!
-#
-# If %s can be used in the file name it will be replaced with a
-# a representation of the cache_dir name where each / is replaced
-# with '.'. This is needed to allow adding/removing cache_dir
-# lines when cache_swap_log is being used.
-#
-# If have more than one 'cache_dir', and %s is not used in the name
-# these swap logs will have names such as:
-#
-# cache_swap_log.00
-# cache_swap_log.01
-# cache_swap_log.02
-#
-# The numbered extension (which is added automatically)
-# corresponds to the order of the 'cache_dir' lines in this
-# configuration file. If you change the order of the 'cache_dir'
-# lines in this file, these index files will NOT correspond to
-# the correct 'cache_dir' entry (unless you manually rename
-# them). We recommend you do NOT use this option. It is
-# better to keep these index files in each 'cache_dir' directory.
-#Default:
-# none
-
-# TAG: logfile_rotate
-# Specifies the number of logfile rotations to make when you
-# type 'squid -k rotate'. The default is 10, which will rotate
-# with extensions 0 through 9. Setting logfile_rotate to 0 will
-# disable the file name rotation, but the logfiles are still closed
-# and re-opened. This will enable you to rename the logfiles
-# yourself just before sending the rotate signal.
-#
-# Note, the 'squid -k rotate' command normally sends a USR1
-# signal to the running squid process. In certain situations
-# (e.g. on Linux with Async I/O), USR1 is used for other
-# purposes, so -k rotate uses another signal. It is best to get
-# in the habit of using 'squid -k rotate' instead of 'kill -USR1
-# <pid>'.
-#
-# Note, from Squid-3.1 this option has no effect on the cache.log,
-# that log can be rotated separately by using debug_options
-#
-# Note2, for Debian/Linux the default of logfile_rotate is
-# zero, since it includes external logfile-rotation methods.
-#Default:
-# logfile_rotate 0
-
-# TAG: emulate_httpd_log on|off
-# The Cache can emulate the log file format which many 'httpd'
-# programs use. To disable/enable this emulation, set
-# emulate_httpd_log to 'off' or 'on'. The default
-# is to use the native log format since it includes useful
-# information Squid-specific log analyzers use.
-#Default:
-# emulate_httpd_log off
-
-# TAG: log_ip_on_direct on|off
-# Log the destination IP address in the hierarchy log tag when going
-# direct. Earlier Squid versions logged the hostname here. If you
-# prefer the old way set this to off.
-#Default:
-# log_ip_on_direct on
-
-# TAG: mime_table
-# Pathname to Squid's MIME table. You shouldn't need to change
-# this, but the default file contains examples and formatting
-# information if you do.
-#Default:
-# mime_table /usr/share/squid3/mime.conf
-
-# TAG: log_mime_hdrs on|off
-# The Cache can record both the request and the response MIME
-# headers for each HTTP transaction. The headers are encoded
-# safely and will appear as two bracketed fields at the end of
-# the access log (for either the native or httpd-emulated log
-# formats). To enable this logging set log_mime_hdrs to 'on'.
-#Default:
-# log_mime_hdrs off
-
-# TAG: useragent_log
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-useragent-log option
-#
-# Squid will write the User-Agent field from HTTP requests
-# to the filename specified here. By default useragent_log
-# is disabled.
-#Default:
-# none
-
-# TAG: referer_log
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-referer-log option
-#
-# Squid will write the Referer field from HTTP requests to the
-# filename specified here. By default referer_log is disabled.
-# Note that "referer" is actually a misspelling of "referrer"
-# however the misspelt version has been accepted into the HTTP RFCs
-# and we accept both.
-#Default:
-# none
-
-# TAG: pid_filename
-# A filename to write the process-id to. To disable, enter "none".
-#Default:
-# pid_filename /var/run/squid3.pid
-
-# TAG: log_fqdn on|off
-# Turn this on if you wish to log fully qualified domain names
-# in the access.log. To do this Squid does a DNS lookup of all
-# IP's connecting to it. This can (in some situations) increase
-# latency, which makes your cache seem slower for interactive
-# browsing.
-#Default:
-# log_fqdn off
-
-# TAG: client_netmask
-# A netmask for client addresses in logfiles and cachemgr output.
-# Change this to protect the privacy of your cache clients.
-# A netmask of 255.255.255.0 will log all IP's in that range with
-# the last digit set to '0'.
-#Default:
-# client_netmask no_addr
-
-# TAG: forward_log
-# Note: This option is only available if Squid is rebuilt with the
-# -DWIP_FWD_LOG define
-#
-# Logs the server-side requests.
-#
-# This is currently work in progress.
-#Default:
-# none
-
-# TAG: strip_query_terms
-# By default, Squid strips query terms from requested URLs before
-# logging. This protects your user's privacy.
-#Default:
-# strip_query_terms on
-
-# TAG: buffered_logs on|off
-# cache.log log file is written with stdio functions, and as such
-# it can be buffered or unbuffered. By default it will be unbuffered.
-# Buffering it can speed up the writing slightly (though you are
-# unlikely to need to worry unless you run with tons of debugging
-# enabled in which case performance will suffer badly anyway..).
-#Default:
-# buffered_logs off
-
-# TAG: netdb_filename
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-icmp option
-#
-# A filename where Squid stores it's netdb state between restarts.
-# To disable, enter "none".
-#Default:
-# netdb_filename /var/log/squid3/netdb.state
-
-# OPTIONS FOR TROUBLESHOOTING
-# -----------------------------------------------------------------------------
-
-# TAG: cache_log
-# Cache logging file. This is where general information about
-# your cache's behavior goes. You can increase the amount of data
-# logged to this file and how often its rotated with "debug_options"
-#Default:
-# cache_log /var/log/squid3/cache.log
-
-# TAG: debug_options
-# Logging options are set as section,level where each source file
-# is assigned a unique section. Lower levels result in less
-# output, Full debugging (level 9) can result in a very large
-# log file, so be careful.
-#
-# The magic word "ALL" sets debugging levels for all sections.
-# We recommend normally running with "ALL,1".
-#
-# The rotate=N option can be used to keep more or less of these logs
-# than would otherwise be kept by logfile_rotate.
-# For most uses a single log should be enough to monitor current
-# events affecting Squid.
-#Default:
-# debug_options ALL,1
-
-# TAG: coredump_dir
-# By default Squid leaves core files in the directory from where
-# it was started. If you set 'coredump_dir' to a directory
-# that exists, Squid will chdir() to that directory at startup
-# and coredump files will be left there.
-#
-#Default:
-# coredump_dir none
-#
-
-# Leave coredumps in the first cache dir
-coredump_dir /var/spool/squid3
-
-# OPTIONS FOR FTP GATEWAYING
-# -----------------------------------------------------------------------------
-
-# TAG: ftp_user
-# If you want the anonymous login password to be more informative
-# (and enable the use of picky ftp servers), set this to something
-# reasonable for your domain, like wwwuser@somewhere.net
-#
-# The reason why this is domainless by default is the
-# request can be made on the behalf of a user in any domain,
-# depending on how the cache is used.
-# Some ftp server also validate the email address is valid
-# (for example perl.com).
-#Default:
-# ftp_user Squid@
-
-# TAG: ftp_list_width
-# Sets the width of ftp listings. This should be set to fit in
-# the width of a standard browser. Setting this too small
-# can cut off long filenames when browsing ftp sites.
-#Default:
-# ftp_list_width 32
-
-# TAG: ftp_passive
-# If your firewall does not allow Squid to use passive
-# connections, turn off this option.
-#
-# Use of ftp_epsv_all option requires this to be ON.
-#Default:
-# ftp_passive on
-
-# TAG: ftp_epsv_all
-# FTP Protocol extensions permit the use of a special "EPSV ALL" command.
-#
-# NATs may be able to put the connection on a "fast path" through the
-# translator, as the EPRT command will never be used and therefore,
-# translation of the data portion of the segments will never be needed.
-#
-# When a client only expects to do two-way FTP transfers this may be
-# useful.
-# If squid finds that it must do a three-way FTP transfer after issuing
-# an EPSV ALL command, the FTP session will fail.
-#
-# If you have any doubts about this option do not use it.
-# Squid will nicely attempt all other connection methods.
-#
-# Requires ftp_passive to be ON (default) for any effect.
-#Default:
-# ftp_epsv_all off
-
-# TAG: ftp_epsv
-# FTP Protocol extensions permit the use of a special "EPSV" command.
-#
-# NATs may be able to put the connection on a "fast path" through the
-# translator using EPSV, as the EPRT command will never be used
-# and therefore, translation of the data portion of the segments
-# will never be needed.
-#
-# Turning this OFF will prevent EPSV being attempted.
-# WARNING: Doing so will convert Squid back to the old behavior with all
-# the related problems with external NAT devices/layers.
-#
-# Requires ftp_passive to be ON (default) for any effect.
-#Default:
-# ftp_epsv on
-
-# TAG: ftp_eprt
-# FTP Protocol extensions permit the use of a special "EPRT" command.
-#
-# This extension provides a protocol neutral alternative to the
-# IPv4-only PORT command. When supported it enables active FTP data
-# channels over IPv6 and efficient NAT handling.
-#
-# Turning this OFF will prevent EPRT being attempted and will skip
-# straight to using PORT for IPv4 servers.
-#
-# Some devices are known to not handle this extension correctly and
-# may result in crashes. Devices which suport EPRT enough to fail
-# cleanly will result in Squid attempting PORT anyway. This directive
-# should only be disabled when EPRT results in device failures.
-#
-# WARNING: Doing so will convert Squid back to the old behavior with all
-# the related problems with external NAT devices/layers and IPv4-only FTP.
-#Default:
-# ftp_eprt on
-
-# TAG: ftp_sanitycheck
-# For security and data integrity reasons Squid by default performs
-# sanity checks of the addresses of FTP data connections ensure the
-# data connection is to the requested server. If you need to allow
-# FTP connections to servers using another IP address for the data
-# connection turn this off.
-#Default:
-# ftp_sanitycheck on
-
-# TAG: ftp_telnet_protocol
-# The FTP protocol is officially defined to use the telnet protocol
-# as transport channel for the control connection. However, many
-# implementations are broken and does not respect this aspect of
-# the FTP protocol.
-#
-# If you have trouble accessing files with ASCII code 255 in the
-# path or similar problems involving this ASCII code you can
-# try setting this directive to off. If that helps, report to the
-# operator of the FTP server in question that their FTP server
-# is broken and does not follow the FTP standard.
-#Default:
-# ftp_telnet_protocol on
-
-# OPTIONS FOR EXTERNAL SUPPORT PROGRAMS
-# -----------------------------------------------------------------------------
-
-# TAG: diskd_program
-# Specify the location of the diskd executable.
-# Note this is only useful if you have compiled in
-# diskd as one of the store io modules.
-#Default:
-# diskd_program /usr/lib/squid3/diskd
-
-# TAG: unlinkd_program
-# Specify the location of the executable for file deletion process.
-#Default:
-# unlinkd_program /usr/lib/squid3/unlinkd
-
-# TAG: pinger_program
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-icmp option
-#
-# Specify the location of the executable for the pinger process.
-#Default:
-# pinger_program /usr/lib/squid3/pinger
-
-# TAG: pinger_enable
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-icmp option
-#
-# Control whether the pinger is active at run-time.
-# Enables turning ICMP pinger on and off with a simple
-# squid -k reconfigure.
-#Default:
-# pinger_enable off
-
-# OPTIONS FOR URL REWRITING
-# -----------------------------------------------------------------------------
-
-# TAG: url_rewrite_program
-# Specify the location of the executable URL rewriter to use.
-# Since they can perform almost any function there isn't one included.
-#
-# For each requested URL, the rewriter will receive on line with the format
-#
-# URL <SP> client_ip "/" fqdn <SP> user <SP> method [<SP> kvpairs]<NL>
-#
-# In the future, the rewriter interface will be extended with
-# key=value pairs ("kvpairs" shown above). Rewriter programs
-# should be prepared to receive and possibly ignore additional
-# whitespace-separated tokens on each input line.
-#
-# And the rewriter may return a rewritten URL. The other components of
-# the request line does not need to be returned (ignored if they are).
-#
-# The rewriter can also indicate that a client-side redirect should
-# be performed to the new URL. This is done by prefixing the returned
-# URL with "301:" (moved permanently) or 302: (moved temporarily), etc.
-#
-# By default, a URL rewriter is not used.
-#Default:
-# none
-
-# TAG: url_rewrite_children
-# The number of redirector processes to spawn. If you start
-# too few Squid will have to wait for them to process a backlog of
-# URLs, slowing it down. If you start too many they will use RAM
-# and other system resources.
-#Default:
-# url_rewrite_children 5
-
-# TAG: url_rewrite_concurrency
-# The number of requests each redirector helper can handle in
-# parallel. Defaults to 0 which indicates the redirector
-# is a old-style single threaded redirector.
-#
-# When this directive is set to a value >= 1 then the protocol
-# used to communicate with the helper is modified to include
-# a request ID in front of the request/response. The request
-# ID from the request must be echoed back with the response
-# to that request.
-#Default:
-# url_rewrite_concurrency 0
-
-# TAG: url_rewrite_host_header
-# By default Squid rewrites any Host: header in redirected
-# requests. If you are running an accelerator this may
-# not be a wanted effect of a redirector.
-#
-# WARNING: Entries are cached on the result of the URL rewriting
-# process, so be careful if you have domain-virtual hosts.
-#Default:
-# url_rewrite_host_header on
-
-# TAG: url_rewrite_access
-# If defined, this access list specifies which requests are
-# sent to the redirector processes. By default all requests
-# are sent.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# none
-
-# TAG: url_rewrite_bypass
-# When this is 'on', a request will not go through the
-# redirector if all redirectors are busy. If this is 'off'
-# and the redirector queue grows too large, Squid will exit
-# with a FATAL error and ask you to increase the number of
-# redirectors. You should only enable this if the redirectors
-# are not critical to your caching system. If you use
-# redirectors for access control, and you enable this option,
-# users may have access to pages they should not
-# be allowed to request.
-#Default:
-# url_rewrite_bypass off
-
-# OPTIONS FOR TUNING THE CACHE
-# -----------------------------------------------------------------------------
-
-# TAG: cache
-# A list of ACL elements which, if matched and denied, cause the request to
-# not be satisfied from the cache and the reply to not be cached.
-# In other words, use this to force certain objects to never be cached.
-#
-# You must use the words 'allow' or 'deny' to indicate whether items
-# matching the ACL should be allowed or denied into the cache.
-#
-# Default is to allow all to be cached.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# none
-
-# TAG: refresh_pattern
-# usage: refresh_pattern [-i] regex min percent max [options]
-#
-# By default, regular expressions are CASE-SENSITIVE. To make
-# them case-insensitive, use the -i option.
-#
-# 'Min' is the time (in minutes) an object without an explicit
-# expiry time should be considered fresh. The recommended
-# value is 0, any higher values may cause dynamic applications
-# to be erroneously cached unless the application designer
-# has taken the appropriate actions.
-#
-# 'Percent' is a percentage of the objects age (time since last
-# modification age) an object without explicit expiry time
-# will be considered fresh.
-#
-# 'Max' is an upper limit on how long objects without an explicit
-# expiry time will be considered fresh.
-#
-# options: override-expire
-# override-lastmod
-# reload-into-ims
-# ignore-reload
-# ignore-no-cache
-# ignore-no-store
-# ignore-must-revalidate
-# ignore-private
-# ignore-auth
-# refresh-ims
-#
-# override-expire enforces min age even if the server
-# sent an explicit expiry time (e.g., with the
-# Expires: header or Cache-Control: max-age). Doing this
-# VIOLATES the HTTP standard. Enabling this feature
-# could make you liable for problems which it causes.
-#
-# Note: override-expire does not enforce staleness - it only extends
-# freshness / min. If the server returns a Expires time which
-# is longer than your max time, Squid will still consider
-# the object fresh for that period of time.
-#
-# override-lastmod enforces min age even on objects
-# that were modified recently.
-#
-# reload-into-ims changes client no-cache or ``reload''
-# to If-Modified-Since requests. Doing this VIOLATES the
-# HTTP standard. Enabling this feature could make you
-# liable for problems which it causes.
-#
-# ignore-reload ignores a client no-cache or ``reload''
-# header. Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which
-# it causes.
-#
-# ignore-no-cache ignores any ``Pragma: no-cache'' and
-# ``Cache-control: no-cache'' headers received from a server.
-# The HTTP RFC never allows the use of this (Pragma) header
-# from a server, only a client, though plenty of servers
-# send it anyway.
-#
-# ignore-no-store ignores any ``Cache-control: no-store''
-# headers received from a server. Doing this VIOLATES
-# the HTTP standard. Enabling this feature could make you
-# liable for problems which it causes.
-#
-# ignore-must-revalidate ignores any ``Cache-Control: must-revalidate``
-# headers received from a server. Doing this VIOLATES
-# the HTTP standard. Enabling this feature could make you
-# liable for problems which it causes.
-#
-# ignore-private ignores any ``Cache-control: private''
-# headers received from a server. Doing this VIOLATES
-# the HTTP standard. Enabling this feature could make you
-# liable for problems which it causes.
-#
-# ignore-auth caches responses to requests with authorization,
-# as if the originserver had sent ``Cache-control: public''
-# in the response header. Doing this VIOLATES the HTTP standard.
-# Enabling this feature could make you liable for problems which
-# it causes.
-#
-# refresh-ims causes squid to contact the origin server
-# when a client issues an If-Modified-Since request. This
-# ensures that the client will receive an updated version
-# if one is available.
-#
-# Basically a cached object is:
-#
-# FRESH if expires < now, else STALE
-# STALE if age > max
-# FRESH if lm-factor < percent, else STALE
-# FRESH if age < min
-# else STALE
-#
-# The refresh_pattern lines are checked in the order listed here.
-# The first entry which matches is used. If none of the entries
-# match the default will be used.
-#
-# Note, you must uncomment all the default lines if you want
-# to change one. The default setting is only active if none is
-# used.
-#
-#
-
-# Add any of your own refresh_pattern entries above these.
-refresh_pattern ^ftp: 1440 20% 10080
-refresh_pattern ^gopher: 1440 0% 1440
-refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
-refresh_pattern /(|In)Release(|\.gpg)$ 0 0% 0
-refresh_pattern /(Packages|Sources)(|\.gz|\.bz2|\.xz)$ 0 0% 0
-refresh_pattern \.deb$ 129600 100% 129600
-refresh_pattern \.udeb$ 129600 100% 129600
-refresh_pattern \.tar\.(gz|bz2|xz|lzma)$ 129600 100% 129600
-refresh_pattern . 0 20% 4320
-
-# TAG: quick_abort_min (KB)
-#Default:
-# quick_abort_min 16 KB
-
-# TAG: quick_abort_max (KB)
-#Default:
-# quick_abort_max 16 KB
-
-# TAG: quick_abort_pct (percent)
-# The cache by default continues downloading aborted requests
-# which are almost completed (less than 16 KB remaining). This
-# may be undesirable on slow (e.g. SLIP) links and/or very busy
-# caches. Impatient users may tie up file descriptors and
-# bandwidth by repeatedly requesting and immediately aborting
-# downloads.
-#
-# When the user aborts a request, Squid will check the
-# quick_abort values to the amount of data transfered until
-# then.
-#
-# If the transfer has less than 'quick_abort_min' KB remaining,
-# it will finish the retrieval.
-#
-# If the transfer has more than 'quick_abort_max' KB remaining,
-# it will abort the retrieval.
-#
-# If more than 'quick_abort_pct' of the transfer has completed,
-# it will finish the retrieval.
-#
-# If you do not want any retrieval to continue after the client
-# has aborted, set both 'quick_abort_min' and 'quick_abort_max'
-# to '0 KB'.
-#
-# If you want retrievals to always continue if they are being
-# cached set 'quick_abort_min' to '-1 KB'.
-#Default:
-# quick_abort_pct 95
-
-# TAG: read_ahead_gap buffer-size
-# The amount of data the cache will buffer ahead of what has been
-# sent to the client when retrieving an object from another server.
-#Default:
-# read_ahead_gap 16 KB
-
-# TAG: negative_ttl time-units
-# Set the Default Time-to-Live (TTL) for failed requests.
-# Certain types of failures (such as "connection refused" and
-# "404 Not Found") are able to be negatively-cached for a short time.
-# Modern web servers should provide Expires: header, however if they
-# do not this can provide a minimum TTL.
-# The default is not to cache errors with unknown expiry details.
-#
-# Note that this is different from negative caching of DNS lookups.
-#
-# WARNING: Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which it
-# causes.
-#Default:
-# negative_ttl 0 seconds
-
-# TAG: positive_dns_ttl time-units
-# Upper limit on how long Squid will cache positive DNS responses.
-# Default is 6 hours (360 minutes). This directive must be set
-# larger than negative_dns_ttl.
-#Default:
-# positive_dns_ttl 6 hours
-
-# TAG: negative_dns_ttl time-units
-# Time-to-Live (TTL) for negative caching of failed DNS lookups.
-# This also sets the lower cache limit on positive lookups.
-# Minimum value is 1 second, and it is not recommendable to go
-# much below 10 seconds.
-#Default:
-# negative_dns_ttl 1 minutes
-
-# TAG: range_offset_limit (bytes)
-# Sets a upper limit on how far into the the file a Range request
-# may be to cause Squid to prefetch the whole file. If beyond this
-# limit Squid forwards the Range request as it is and the result
-# is NOT cached.
-#
-# This is to stop a far ahead range request (lets say start at 17MB)
-# from making Squid fetch the whole object up to that point before
-# sending anything to the client.
-#
-# A value of 0 causes Squid to never fetch more than the
-# client requested. (default)
-#
-# A value of -1 causes Squid to always fetch the object from the
-# beginning so it may cache the result. (2.0 style)
-#
-# NP: Using -1 here will override any quick_abort settings that may
-# otherwise apply to the range request. The range request will
-# be fully fetched from start to finish regardless of the client
-# actions. This affects bandwidth usage.
-#Default:
-# range_offset_limit 0 KB
-
-# TAG: minimum_expiry_time (seconds)
-# The minimum caching time according to (Expires - Date)
-# Headers Squid honors if the object can't be revalidated
-# defaults to 60 seconds. In reverse proxy environments it
-# might be desirable to honor shorter object lifetimes. It
-# is most likely better to make your server return a
-# meaningful Last-Modified header however. In ESI environments
-# where page fragments often have short lifetimes, this will
-# often be best set to 0.
-#Default:
-# minimum_expiry_time 60 seconds
-
-# TAG: store_avg_object_size (kbytes)
-# Average object size, used to estimate number of objects your
-# cache can hold. The default is 13 KB.
-#Default:
-# store_avg_object_size 13 KB
-
-# TAG: store_objects_per_bucket
-# Target number of objects per bucket in the store hash table.
-# Lowering this value increases the total number of buckets and
-# also the storage maintenance rate. The default is 20.
-#Default:
-# store_objects_per_bucket 20
-
-# HTTP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: request_header_max_size (KB)
-# This specifies the maximum size for HTTP headers in a request.
-# Request headers are usually relatively small (about 512 bytes).
-# Placing a limit on the request header size will catch certain
-# bugs (for example with persistent connections) and possibly
-# buffer-overflow or denial-of-service attacks.
-#Default:
-# request_header_max_size 64 KB
-
-# TAG: reply_header_max_size (KB)
-# This specifies the maximum size for HTTP headers in a reply.
-# Reply headers are usually relatively small (about 512 bytes).
-# Placing a limit on the reply header size will catch certain
-# bugs (for example with persistent connections) and possibly
-# buffer-overflow or denial-of-service attacks.
-#Default:
-# reply_header_max_size 64 KB
-
-# TAG: request_body_max_size (bytes)
-# This specifies the maximum size for an HTTP request body.
-# In other words, the maximum size of a PUT/POST request.
-# A user who attempts to send a request with a body larger
-# than this limit receives an "Invalid Request" error message.
-# If you set this parameter to a zero (the default), there will
-# be no limit imposed.
-#Default:
-# request_body_max_size 0 KB
-
-# TAG: client_request_buffer_max_size (bytes)
-# This specifies the maximum buffer size of a client request.
-# It prevents squid eating too much memory when somebody uploads
-# a large file.
-#Default:
-# client_request_buffer_max_size 512 KB
-
-# TAG: chunked_request_body_max_size (bytes)
-# A broken or confused HTTP/1.1 client may send a chunked HTTP
-# request to Squid. Squid does not have full support for that
-# feature yet. To cope with such requests, Squid buffers the
-# entire request and then dechunks request body to create a
-# plain HTTP/1.0 request with a known content length. The plain
-# request is then used by the rest of Squid code as usual.
-#
-# The option value specifies the maximum size of the buffer used
-# to hold the request before the conversion. If the chunked
-# request size exceeds the specified limit, the conversion
-# fails, and the client receives an "unsupported request" error,
-# as if dechunking was disabled.
-#
-# Dechunking is enabled by default. To disable conversion of
-# chunked requests, set the maximum to zero.
-#
-# Request dechunking feature and this option in particular are a
-# temporary hack. When chunking requests and responses are fully
-# supported, there will be no need to buffer a chunked request.
-#Default:
-# chunked_request_body_max_size 64 KB
-
-# TAG: broken_posts
-# A list of ACL elements which, if matched, causes Squid to send
-# an extra CRLF pair after the body of a PUT/POST request.
-#
-# Some HTTP servers has broken implementations of PUT/POST,
-# and rely on an extra CRLF pair sent by some WWW clients.
-#
-# Quote from RFC2616 section 4.1 on this matter:
-#
-# Note: certain buggy HTTP/1.0 client implementations generate an
-# extra CRLF's after a POST request. To restate what is explicitly
-# forbidden by the BNF, an HTTP/1.1 client must not preface or follow
-# a request with an extra CRLF.
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#
-#Example:
-# acl buggy_server url_regex ^http://....
-# broken_posts allow buggy_server
-#Default:
-# none
-
-# TAG: icap_uses_indirect_client on|off
-# Controls whether the indirect client IP address (instead of the direct
-# client IP address) is passed to adaptation services.
-#
-# See also: follow_x_forwarded_for adaptation_send_client_ip
-#Default:
-# icap_uses_indirect_client on
-
-# TAG: via on|off
-# If set (default), Squid will include a Via header in requests and
-# replies as required by RFC2616.
-#Default:
-# via on
-
-# TAG: ie_refresh on|off
-# Microsoft Internet Explorer up until version 5.5 Service
-# Pack 1 has an issue with transparent proxies, wherein it
-# is impossible to force a refresh. Turning this on provides
-# a partial fix to the problem, by causing all IMS-REFRESH
-# requests from older IE versions to check the origin server
-# for fresh content. This reduces hit ratio by some amount
-# (~10% in my experience), but allows users to actually get
-# fresh content when they want it. Note because Squid
-# cannot tell if the user is using 5.5 or 5.5SP1, the behavior
-# of 5.5 is unchanged from old versions of Squid (i.e. a
-# forced refresh is impossible). Newer versions of IE will,
-# hopefully, continue to have the new behavior and will be
-# handled based on that assumption. This option defaults to
-# the old Squid behavior, which is better for hit ratios but
-# worse for clients using IE, if they need to be able to
-# force fresh content.
-#Default:
-# ie_refresh off
-
-# TAG: vary_ignore_expire on|off
-# Many HTTP servers supporting Vary gives such objects
-# immediate expiry time with no cache-control header
-# when requested by a HTTP/1.0 client. This option
-# enables Squid to ignore such expiry times until
-# HTTP/1.1 is fully implemented.
-#
-# WARNING: If turned on this may eventually cause some
-# varying objects not intended for caching to get cached.
-#Default:
-# vary_ignore_expire off
-
-# TAG: request_entities
-# Squid defaults to deny GET and HEAD requests with request entities,
-# as the meaning of such requests are undefined in the HTTP standard
-# even if not explicitly forbidden.
-#
-# Set this directive to on if you have clients which insists
-# on sending request entities in GET or HEAD requests. But be warned
-# that there is server software (both proxies and web servers) which
-# can fail to properly process this kind of request which may make you
-# vulnerable to cache pollution attacks if enabled.
-#Default:
-# request_entities off
-
-# TAG: request_header_access
-# Usage: request_header_access header_name allow|deny [!]aclname ...
-#
-# WARNING: Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which it
-# causes.
-#
-# This option replaces the old 'anonymize_headers' and the
-# older 'http_anonymizer' option with something that is much
-# more configurable. This new method creates a list of ACLs
-# for each header, allowing you very fine-tuned header
-# mangling.
-#
-# This option only applies to request headers, i.e., from the
-# client to the server.
-#
-# You can only specify known headers for the header name.
-# Other headers are reclassified as 'Other'. You can also
-# refer to all the headers with 'All'.
-#
-# For example, to achieve the same behavior as the old
-# 'http_anonymizer standard' option, you should use:
-#
-# request_header_access From deny all
-# request_header_access Referer deny all
-# request_header_access Server deny all
-# request_header_access User-Agent deny all
-# request_header_access WWW-Authenticate deny all
-# request_header_access Link deny all
-#
-# Or, to reproduce the old 'http_anonymizer paranoid' feature
-# you should use:
-#
-# request_header_access Allow allow all
-# request_header_access Authorization allow all
-# request_header_access WWW-Authenticate allow all
-# request_header_access Proxy-Authorization allow all
-# request_header_access Proxy-Authenticate allow all
-# request_header_access Cache-Control allow all
-# request_header_access Content-Encoding allow all
-# request_header_access Content-Length allow all
-# request_header_access Content-Type allow all
-# request_header_access Date allow all
-# request_header_access Expires allow all
-# request_header_access Host allow all
-# request_header_access If-Modified-Since allow all
-# request_header_access Last-Modified allow all
-# request_header_access Location allow all
-# request_header_access Pragma allow all
-# request_header_access Accept allow all
-# request_header_access Accept-Charset allow all
-# request_header_access Accept-Encoding allow all
-# request_header_access Accept-Language allow all
-# request_header_access Content-Language allow all
-# request_header_access Mime-Version allow all
-# request_header_access Retry-After allow all
-# request_header_access Title allow all
-# request_header_access Connection allow all
-# request_header_access All deny all
-#
-# although many of those are HTTP reply headers, and so should be
-# controlled with the reply_header_access directive.
-#
-# By default, all headers are allowed (no anonymizing is
-# performed).
-#Default:
-# none
-
-# TAG: reply_header_access
-# Usage: reply_header_access header_name allow|deny [!]aclname ...
-#
-# WARNING: Doing this VIOLATES the HTTP standard. Enabling
-# this feature could make you liable for problems which it
-# causes.
-#
-# This option only applies to reply headers, i.e., from the
-# server to the client.
-#
-# This is the same as request_header_access, but in the other
-# direction.
-#
-# This option replaces the old 'anonymize_headers' and the
-# older 'http_anonymizer' option with something that is much
-# more configurable. This new method creates a list of ACLs
-# for each header, allowing you very fine-tuned header
-# mangling.
-#
-# You can only specify known headers for the header name.
-# Other headers are reclassified as 'Other'. You can also
-# refer to all the headers with 'All'.
-#
-# For example, to achieve the same behavior as the old
-# 'http_anonymizer standard' option, you should use:
-#
-# reply_header_access From deny all
-# reply_header_access Referer deny all
-# reply_header_access Server deny all
-# reply_header_access User-Agent deny all
-# reply_header_access WWW-Authenticate deny all
-# reply_header_access Link deny all
-#
-# Or, to reproduce the old 'http_anonymizer paranoid' feature
-# you should use:
-#
-# reply_header_access Allow allow all
-# reply_header_access Authorization allow all
-# reply_header_access WWW-Authenticate allow all
-# reply_header_access Proxy-Authorization allow all
-# reply_header_access Proxy-Authenticate allow all
-# reply_header_access Cache-Control allow all
-# reply_header_access Content-Encoding allow all
-# reply_header_access Content-Length allow all
-# reply_header_access Content-Type allow all
-# reply_header_access Date allow all
-# reply_header_access Expires allow all
-# reply_header_access Host allow all
-# reply_header_access If-Modified-Since allow all
-# reply_header_access Last-Modified allow all
-# reply_header_access Location allow all
-# reply_header_access Pragma allow all
-# reply_header_access Accept allow all
-# reply_header_access Accept-Charset allow all
-# reply_header_access Accept-Encoding allow all
-# reply_header_access Accept-Language allow all
-# reply_header_access Content-Language allow all
-# reply_header_access Mime-Version allow all
-# reply_header_access Retry-After allow all
-# reply_header_access Title allow all
-# reply_header_access Connection allow all
-# reply_header_access All deny all
-#
-# although the HTTP request headers won't be usefully controlled
-# by this directive -- see request_header_access for details.
-#
-# By default, all headers are allowed (no anonymizing is
-# performed).
-#Default:
-# none
-
-# TAG: request_header_replace
-# Usage: request_header_replace header_name message
-# Example: request_header_replace User-Agent Nutscrape/1.0 (CP/M; 8-bit)
-#
-# This option allows you to change the contents of headers
-# denied with request_header_access above, by replacing them
-# with some fixed string. This replaces the old fake_user_agent
-# option.
-#
-# This only applies to request headers, not reply headers.
-#
-# By default, headers are removed if denied.
-#Default:
-# none
-
-# TAG: reply_header_replace
-# Usage: reply_header_replace header_name message
-# Example: reply_header_replace Server Foo/1.0
-#
-# This option allows you to change the contents of headers
-# denied with reply_header_access above, by replacing them
-# with some fixed string.
-#
-# This only applies to reply headers, not request headers.
-#
-# By default, headers are removed if denied.
-#Default:
-# none
-
-# TAG: relaxed_header_parser on|off|warn
-# In the default "on" setting Squid accepts certain forms
-# of non-compliant HTTP messages where it is unambiguous
-# what the sending application intended even if the message
-# is not correctly formatted. The messages is then normalized
-# to the correct form when forwarded by Squid.
-#
-# If set to "warn" then a warning will be emitted in cache.log
-# each time such HTTP error is encountered.
-#
-# If set to "off" then such HTTP errors will cause the request
-# or response to be rejected.
-#Default:
-# relaxed_header_parser on
-
-# TAG: ignore_expect_100 on|off
-# This option makes Squid ignore any Expect: 100-continue header present
-# in the request. RFC 2616 requires that Squid being unable to satisfy
-# the response expectation MUST return a 417 error.
-#
-# Note: Enabling this is a HTTP protocol violation, but some clients may
-# not handle it well..
-#Default:
-# ignore_expect_100 off
-
-# TIMEOUTS
-# -----------------------------------------------------------------------------
-
-# TAG: forward_timeout time-units
-# This parameter specifies how long Squid should at most attempt in
-# finding a forwarding path for the request before giving up.
-#Default:
-# forward_timeout 4 minutes
-
-# TAG: connect_timeout time-units
-# This parameter specifies how long to wait for the TCP connect to
-# the requested server or peer to complete before Squid should
-# attempt to find another path where to forward the request.
-#Default:
-# connect_timeout 1 minute
-
-# TAG: peer_connect_timeout time-units
-# This parameter specifies how long to wait for a pending TCP
-# connection to a peer cache. The default is 30 seconds. You
-# may also set different timeout values for individual neighbors
-# with the 'connect-timeout' option on a 'cache_peer' line.
-#Default:
-# peer_connect_timeout 30 seconds
-
-# TAG: read_timeout time-units
-# The read_timeout is applied on server-side connections. After
-# each successful read(), the timeout will be extended by this
-# amount. If no data is read again after this amount of time,
-# the request is aborted and logged with ERR_READ_TIMEOUT. The
-# default is 15 minutes.
-#Default:
-# read_timeout 15 minutes
-
-# TAG: request_timeout
-# How long to wait for complete HTTP request headers after initial
-# connection establishment.
-#Default:
-# request_timeout 5 minutes
-
-# TAG: persistent_request_timeout
-# How long to wait for the next HTTP request on a persistent
-# connection after the previous request completes.
-#Default:
-# persistent_request_timeout 2 minutes
-
-# TAG: client_lifetime time-units
-# The maximum amount of time a client (browser) is allowed to
-# remain connected to the cache process. This protects the Cache
-# from having a lot of sockets (and hence file descriptors) tied up
-# in a CLOSE_WAIT state from remote clients that go away without
-# properly shutting down (either because of a network failure or
-# because of a poor client implementation). The default is one
-# day, 1440 minutes.
-#
-# NOTE: The default value is intended to be much larger than any
-# client would ever need to be connected to your cache. You
-# should probably change client_lifetime only as a last resort.
-# If you seem to have many client connections tying up
-# filedescriptors, we recommend first tuning the read_timeout,
-# request_timeout, persistent_request_timeout and quick_abort values.
-#Default:
-# client_lifetime 1 day
-
-# TAG: half_closed_clients
-# Some clients may shutdown the sending side of their TCP
-# connections, while leaving their receiving sides open. Sometimes,
-# Squid can not tell the difference between a half-closed and a
-# fully-closed TCP connection.
-#
-# By default, Squid will immediately close client connections when
-# read(2) returns "no more data to read."
-#
-# Change this option to 'on' and Squid will keep open connections
-# until a read(2) or write(2) on the socket returns an error.
-# This may show some benefits for reverse proxies. But if not
-# it is recommended to leave OFF.
-#Default:
-# half_closed_clients off
-
-# TAG: pconn_timeout
-# Timeout for idle persistent connections to servers and other
-# proxies.
-#Default:
-# pconn_timeout 1 minute
-
-# TAG: ident_timeout
-# Maximum time to wait for IDENT lookups to complete.
-#
-# If this is too high, and you enabled IDENT lookups from untrusted
-# users, you might be susceptible to denial-of-service by having
-# many ident requests going at once.
-#Default:
-# ident_timeout 10 seconds
-
-# TAG: shutdown_lifetime time-units
-# When SIGTERM or SIGHUP is received, the cache is put into
-# "shutdown pending" mode until all active sockets are closed.
-# This value is the lifetime to set for all open descriptors
-# during shutdown mode. Any active clients after this many
-# seconds will receive a 'timeout' message.
-#Default:
-# shutdown_lifetime 30 seconds
-
-# ADMINISTRATIVE PARAMETERS
-# -----------------------------------------------------------------------------
-
-# TAG: cache_mgr
-# Email-address of local cache manager who will receive
-# mail if the cache dies. The default is "webmaster."
-#Default:
-# cache_mgr webmaster
-
-# TAG: mail_from
-# From: email-address for mail sent when the cache dies.
-# The default is to use 'appname@unique_hostname'.
-# Default appname value is "squid", can be changed into
-# src/globals.h before building squid.
-#Default:
-# none
-
-# TAG: mail_program
-# Email program used to send mail if the cache dies.
-# The default is "mail". The specified program must comply
-# with the standard Unix mail syntax:
-# mail-program recipient < mailfile
-#
-# Optional command line options can be specified.
-#Default:
-# mail_program mail
-
-# TAG: cache_effective_user
-# If you start Squid as root, it will change its effective/real
-# UID/GID to the user specified below. The default is to change
-# to UID of proxy.
-# see also; cache_effective_group
-#Default:
-# cache_effective_user proxy
-
-# TAG: cache_effective_group
-# Squid sets the GID to the effective user's default group ID
-# (taken from the password file) and supplementary group list
-# from the groups membership.
-#
-# If you want Squid to run with a specific GID regardless of
-# the group memberships of the effective user then set this
-# to the group (or GID) you want Squid to run as. When set
-# all other group privileges of the effective user are ignored
-# and only this GID is effective. If Squid is not started as
-# root the user starting Squid MUST be member of the specified
-# group.
-#
-# This option is not recommended by the Squid Team.
-# Our preference is for administrators to configure a secure
-# user account for squid with UID/GID matching system policies.
-#Default:
-# none
-
-# TAG: httpd_suppress_version_string on|off
-# Suppress Squid version string info in HTTP headers and HTML error pages.
-#Default:
-# httpd_suppress_version_string off
-
-# TAG: visible_hostname
-# If you want to present a special hostname in error messages, etc,
-# define this. Otherwise, the return value of gethostname()
-# will be used. If you have multiple caches in a cluster and
-# get errors about IP-forwarding you must set them to have individual
-# names with this setting.
-#Default:
-# visible_hostname localhost
-
-# TAG: unique_hostname
-# If you want to have multiple machines with the same
-# 'visible_hostname' you must give each machine a different
-# 'unique_hostname' so forwarding loops can be detected.
-#Default:
-# none
-
-# TAG: hostname_aliases
-# A list of other DNS names your cache has.
-#Default:
-# none
-
-# TAG: umask
-# Minimum umask which should be enforced while the proxy
-# is running, in addition to the umask set at startup.
-#
-# For a traditional octal representation of umasks, start
-# your value with 0.
-#Default:
-# umask 027
-
-# OPTIONS FOR THE CACHE REGISTRATION SERVICE
-# -----------------------------------------------------------------------------
-#
-# This section contains parameters for the (optional) cache
-# announcement service. This service is provided to help
-# cache administrators locate one another in order to join or
-# create cache hierarchies.
-#
-# An 'announcement' message is sent (via UDP) to the registration
-# service by Squid. By default, the announcement message is NOT
-# SENT unless you enable it with 'announce_period' below.
-#
-# The announcement message includes your hostname, plus the
-# following information from this configuration file:
-#
-# http_port
-# icp_port
-# cache_mgr
-#
-# All current information is processed regularly and made
-# available on the Web at http://www.ircache.net/Cache/Tracker/.
-
-# TAG: announce_period
-# This is how frequently to send cache announcements. The
-# default is `0' which disables sending the announcement
-# messages.
-#
-# To enable announcing your cache, just set an announce period.
-#
-# Example:
-# announce_period 1 day
-#Default:
-# announce_period 0
-
-# TAG: announce_host
-#Default:
-# announce_host tracker.ircache.net
-
-# TAG: announce_file
-#Default:
-# none
-
-# TAG: announce_port
-# announce_host and announce_port set the hostname and port
-# number where the registration message will be sent.
-#
-# Hostname will default to 'tracker.ircache.net' and port will
-# default default to 3131. If the 'filename' argument is given,
-# the contents of that file will be included in the announce
-# message.
-#Default:
-# announce_port 3131
-
-# HTTPD-ACCELERATOR OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: httpd_accel_surrogate_id
-# Surrogates (http://www.esi.org/architecture_spec_1.0.html)
-# need an identification token to allow control targeting. Because
-# a farm of surrogates may all perform the same tasks, they may share
-# an identification token.
-#Default:
-# httpd_accel_surrogate_id unset-id
-
-# TAG: http_accel_surrogate_remote on|off
-# Remote surrogates (such as those in a CDN) honour Surrogate-Control: no-store-remote.
-# Set this to on to have squid behave as a remote surrogate.
-#Default:
-# http_accel_surrogate_remote off
-
-# TAG: esi_parser libxml2|expat|custom
-# ESI markup is not strictly XML compatible. The custom ESI parser
-# will give higher performance, but cannot handle non ASCII character
-# encodings.
-#Default:
-# esi_parser custom
-
-# DELAY POOL PARAMETERS
-# -----------------------------------------------------------------------------
-
-# TAG: delay_pools
-# This represents the number of delay pools to be used. For example,
-# if you have one class 2 delay pool and one class 3 delays pool, you
-# have a total of 2 delay pools.
-#Default:
-# delay_pools 0
-
-# TAG: delay_class
-# This defines the class of each delay pool. There must be exactly one
-# delay_class line for each delay pool. For example, to define two
-# delay pools, one of class 2 and one of class 3, the settings above
-# and here would be:
-#
-# Example:
-# delay_pools 4 # 4 delay pools
-# delay_class 1 2 # pool 1 is a class 2 pool
-# delay_class 2 3 # pool 2 is a class 3 pool
-# delay_class 3 4 # pool 3 is a class 4 pool
-# delay_class 4 5 # pool 4 is a class 5 pool
-#
-# The delay pool classes are:
-#
-# class 1 Everything is limited by a single aggregate
-# bucket.
-#
-# class 2 Everything is limited by a single aggregate
-# bucket as well as an "individual" bucket chosen
-# from bits 25 through 32 of the IPv4 address.
-#
-# class 3 Everything is limited by a single aggregate
-# bucket as well as a "network" bucket chosen
-# from bits 17 through 24 of the IP address and a
-# "individual" bucket chosen from bits 17 through
-# 32 of the IPv4 address.
-#
-# class 4 Everything in a class 3 delay pool, with an
-# additional limit on a per user basis. This
-# only takes effect if the username is established
-# in advance - by forcing authentication in your
-# http_access rules.
-#
-# class 5 Requests are grouped according their tag (see
-# external_acl's tag= reply).
-#
-#
-# Each pool also requires a delay_parameters directive to configure the pool size
-# and speed limits used whenever the pool is applied to a request. Along with
-# a set of delay_access directives to determine when it is used.
-#
-# NOTE: If an IP address is a.b.c.d
-# -> bits 25 through 32 are "d"
-# -> bits 17 through 24 are "c"
-# -> bits 17 through 32 are "c * 256 + d"
-#
-# NOTE-2: Due to the use of bitmasks in class 2,3,4 pools they only apply to
-# IPv4 traffic. Class 1 and 5 pools may be used with IPv6 traffic.
-#Default:
-# none
-
-# TAG: delay_access
-# This is used to determine which delay pool a request falls into.
-#
-# delay_access is sorted per pool and the matching starts with pool 1,
-# then pool 2, ..., and finally pool N. The first delay pool where the
-# request is allowed is selected for the request. If it does not allow
-# the request to any pool then the request is not delayed (default).
-#
-# For example, if you want some_big_clients in delay
-# pool 1 and lotsa_little_clients in delay pool 2:
-#
-#Example:
-# delay_access 1 allow some_big_clients
-# delay_access 1 deny all
-# delay_access 2 allow lotsa_little_clients
-# delay_access 2 deny all
-# delay_access 3 allow authenticated_clients
-#Default:
-# none
-
-# TAG: delay_parameters
-# This defines the parameters for a delay pool. Each delay pool has
-# a number of "buckets" associated with it, as explained in the
-# description of delay_class.
-#
-# For a class 1 delay pool, the syntax is:
-# delay_pools pool 1
-# delay_parameters pool aggregate
-#
-# For a class 2 delay pool:
-# delay_pools pool 2
-# delay_parameters pool aggregate individual
-#
-# For a class 3 delay pool:
-# delay_pools pool 3
-# delay_parameters pool aggregate network individual
-#
-# For a class 4 delay pool:
-# delay_pools pool 4
-# delay_parameters pool aggregate network individual user
-#
-# For a class 5 delay pool:
-# delay_pools pool 5
-# delay_parameters pool tagrate
-#
-# The option variables are:
-#
-# pool a pool number - ie, a number between 1 and the
-# number specified in delay_pools as used in
-# delay_class lines.
-#
-# aggregate the speed limit parameters for the aggregate bucket
-# (class 1, 2, 3).
-#
-# individual the speed limit parameters for the individual
-# buckets (class 2, 3).
-#
-# network the speed limit parameters for the network buckets
-# (class 3).
-#
-# user the speed limit parameters for the user buckets
-# (class 4).
-#
-# tagrate the speed limit parameters for the tag buckets
-# (class 5).
-#
-# A pair of delay parameters is written restore/maximum, where restore is
-# the number of bytes (not bits - modem and network speeds are usually
-# quoted in bits) per second placed into the bucket, and maximum is the
-# maximum number of bytes which can be in the bucket at any time.
-#
-# There must be one delay_parameters line for each delay pool.
-#
-#
-# For example, if delay pool number 1 is a class 2 delay pool as in the
-# above example, and is being used to strictly limit each host to 64Kbit/sec
-# (plus overheads), with no overall limit, the line is:
-#
-# delay_parameters 1 -1/-1 8000/8000
-#
-# Note that 8 x 8000 KByte/sec -> 64Kbit/sec.
-#
-# Note that the figure -1 is used to represent "unlimited".
-#
-#
-# And, if delay pool number 2 is a class 3 delay pool as in the above
-# example, and you want to limit it to a total of 256Kbit/sec (strict limit)
-# with each 8-bit network permitted 64Kbit/sec (strict limit) and each
-# individual host permitted 4800bit/sec with a bucket maximum size of 64Kbits
-# to permit a decent web page to be downloaded at a decent speed
-# (if the network is not being limited due to overuse) but slow down
-# large downloads more significantly:
-#
-# delay_parameters 2 32000/32000 8000/8000 600/8000
-#
-# Note that 8 x 32000 KByte/sec -> 256Kbit/sec.
-# 8 x 8000 KByte/sec -> 64Kbit/sec.
-# 8 x 600 Byte/sec -> 4800bit/sec.
-#
-#
-# Finally, for a class 4 delay pool as in the example - each user will
-# be limited to 128Kbits/sec no matter how many workstations they are logged into.:
-#
-# delay_parameters 4 32000/32000 8000/8000 600/64000 16000/16000
-#Default:
-# none
-
-# TAG: delay_initial_bucket_level (percent, 0-100)
-# The initial bucket percentage is used to determine how much is put
-# in each bucket when squid starts, is reconfigured, or first notices
-# a host accessing it (in class 2 and class 3, individual hosts and
-# networks only have buckets associated with them once they have been
-# "seen" by squid).
-#Default:
-# delay_initial_bucket_level 50
-
-# WCCPv1 AND WCCPv2 CONFIGURATION OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: wccp_router
-# Use this option to define your WCCP ``home'' router for
-# Squid.
-#
-# wccp_router supports a single WCCP(v1) router
-#
-# wccp2_router supports multiple WCCPv2 routers
-#
-# only one of the two may be used at the same time and defines
-# which version of WCCP to use.
-#Default:
-# wccp_router any_addr
-
-# TAG: wccp2_router
-# Use this option to define your WCCP ``home'' router for
-# Squid.
-#
-# wccp_router supports a single WCCP(v1) router
-#
-# wccp2_router supports multiple WCCPv2 routers
-#
-# only one of the two may be used at the same time and defines
-# which version of WCCP to use.
-#Default:
-# none
-
-# TAG: wccp_version
-# This directive is only relevant if you need to set up WCCP(v1)
-# to some very old and end-of-life Cisco routers. In all other
-# setups it must be left unset or at the default setting.
-# It defines an internal version in the WCCP(v1) protocol,
-# with version 4 being the officially documented protocol.
-#
-# According to some users, Cisco IOS 11.2 and earlier only
-# support WCCP version 3. If you're using that or an earlier
-# version of IOS, you may need to change this value to 3, otherwise
-# do not specify this parameter.
-#Default:
-# wccp_version 4
-
-# TAG: wccp2_rebuild_wait
-# If this is enabled Squid will wait for the cache dir rebuild to finish
-# before sending the first wccp2 HereIAm packet
-#Default:
-# wccp2_rebuild_wait on
-
-# TAG: wccp2_forwarding_method
-# WCCP2 allows the setting of forwarding methods between the
-# router/switch and the cache. Valid values are as follows:
-#
-# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
-# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting)
-#
-# Currently (as of IOS 12.4) cisco routers only support GRE.
-# Cisco switches only support the L2 redirect assignment method.
-#Default:
-# wccp2_forwarding_method gre
-
-# TAG: wccp2_return_method
-# WCCP2 allows the setting of return methods between the
-# router/switch and the cache for packets that the cache
-# decides not to handle. Valid values are as follows:
-#
-# gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
-# l2 - L2 redirect (forward the packet using Layer 2/MAC rewriting)
-#
-# Currently (as of IOS 12.4) cisco routers only support GRE.
-# Cisco switches only support the L2 redirect assignment.
-#
-# If the "ip wccp redirect exclude in" command has been
-# enabled on the cache interface, then it is still safe for
-# the proxy server to use a l2 redirect method even if this
-# option is set to GRE.
-#Default:
-# wccp2_return_method gre
-
-# TAG: wccp2_assignment_method
-# WCCP2 allows the setting of methods to assign the WCCP hash
-# Valid values are as follows:
-#
-# hash - Hash assignment
-# mask - Mask assignment
-#
-# As a general rule, cisco routers support the hash assignment method
-# and cisco switches support the mask assignment method.
-#Default:
-# wccp2_assignment_method hash
-
-# TAG: wccp2_service
-# WCCP2 allows for multiple traffic services. There are two
-# types: "standard" and "dynamic". The standard type defines
-# one service id - http (id 0). The dynamic service ids can be from
-# 51 to 255 inclusive. In order to use a dynamic service id
-# one must define the type of traffic to be redirected; this is done
-# using the wccp2_service_info option.
-#
-# The "standard" type does not require a wccp2_service_info option,
-# just specifying the service id will suffice.
-#
-# MD5 service authentication can be enabled by adding
-# "password=<password>" to the end of this service declaration.
-#
-# Examples:
-#
-# wccp2_service standard 0 # for the 'web-cache' standard service
-# wccp2_service dynamic 80 # a dynamic service type which will be
-# # fleshed out with subsequent options.
-# wccp2_service standard 0 password=foo
-#Default:
-# wccp2_service standard 0
-
-# TAG: wccp2_service_info
-# Dynamic WCCPv2 services require further information to define the
-# traffic you wish to have diverted.
-#
-# The format is:
-#
-# wccp2_service_info <id> protocol=<protocol> flags=<flag>,<flag>..
-# priority=<priority> ports=<port>,<port>..
-#
-# The relevant WCCPv2 flags:
-# + src_ip_hash, dst_ip_hash
-# + source_port_hash, dst_port_hash
-# + src_ip_alt_hash, dst_ip_alt_hash
-# + src_port_alt_hash, dst_port_alt_hash
-# + ports_source
-#
-# The port list can be one to eight entries.
-#
-# Example:
-#
-# wccp2_service_info 80 protocol=tcp flags=src_ip_hash,ports_source
-# priority=240 ports=80
-#
-# Note: the service id must have been defined by a previous
-# 'wccp2_service dynamic <id>' entry.
-#Default:
-# none
-
-# TAG: wccp2_weight
-# Each cache server gets assigned a set of the destination
-# hash proportional to their weight.
-#Default:
-# wccp2_weight 10000
-
-# TAG: wccp_address
-#Default:
-# wccp_address 0.0.0.0
-
-# TAG: wccp2_address
-# Use this option if you require WCCP to use a specific
-# interface address.
-#
-# The default behavior is to not bind to any specific address.
-#Default:
-# wccp2_address 0.0.0.0
-
-# PERSISTENT CONNECTION HANDLING
-# -----------------------------------------------------------------------------
-#
-# Also see "pconn_timeout" in the TIMEOUTS section
-
-# TAG: client_persistent_connections
-#Default:
-# client_persistent_connections on
-
-# TAG: server_persistent_connections
-# Persistent connection support for clients and servers. By
-# default, Squid uses persistent connections (when allowed)
-# with its clients and servers. You can use these options to
-# disable persistent connections with clients and/or servers.
-#Default:
-# server_persistent_connections on
-
-# TAG: persistent_connection_after_error
-# With this directive the use of persistent connections after
-# HTTP errors can be disabled. Useful if you have clients
-# who fail to handle errors on persistent connections proper.
-#Default:
-# persistent_connection_after_error on
-
-# TAG: detect_broken_pconn
-# Some servers have been found to incorrectly signal the use
-# of HTTP/1.0 persistent connections even on replies not
-# compatible, causing significant delays. This server problem
-# has mostly been seen on redirects.
-#
-# By enabling this directive Squid attempts to detect such
-# broken replies and automatically assume the reply is finished
-# after 10 seconds timeout.
-#Default:
-# detect_broken_pconn off
-
-# CACHE DIGEST OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: digest_generation
-# This controls whether the server will generate a Cache Digest
-# of its contents. By default, Cache Digest generation is
-# enabled if Squid is compiled with --enable-cache-digests defined.
-#Default:
-# digest_generation on
-
-# TAG: digest_bits_per_entry
-# This is the number of bits of the server's Cache Digest which
-# will be associated with the Digest entry for a given HTTP
-# Method and URL (public key) combination. The default is 5.
-#Default:
-# digest_bits_per_entry 5
-
-# TAG: digest_rebuild_period (seconds)
-# This is the wait time between Cache Digest rebuilds.
-#Default:
-# digest_rebuild_period 1 hour
-
-# TAG: digest_rewrite_period (seconds)
-# This is the wait time between Cache Digest writes to
-# disk.
-#Default:
-# digest_rewrite_period 1 hour
-
-# TAG: digest_swapout_chunk_size (bytes)
-# This is the number of bytes of the Cache Digest to write to
-# disk at a time. It defaults to 4096 bytes (4KB), the Squid
-# default swap page.
-#Default:
-# digest_swapout_chunk_size 4096 bytes
-
-# TAG: digest_rebuild_chunk_percentage (percent, 0-100)
-# This is the percentage of the Cache Digest to be scanned at a
-# time. By default it is set to 10% of the Cache Digest.
-#Default:
-# digest_rebuild_chunk_percentage 10
-
-# SNMP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: snmp_port
-# The port number where Squid listens for SNMP requests. To enable
-# SNMP support set this to a suitable port number. Port number
-# 3401 is often used for the Squid SNMP agent. By default it's
-# set to "0" (disabled)
-#
-# Example:
-# snmp_port 3401
-#Default:
-# snmp_port 0
-
-# TAG: snmp_access
-# Allowing or denying access to the SNMP port.
-#
-# All access to the agent is denied by default.
-# usage:
-#
-# snmp_access allow|deny [!]aclname ...
-#
-# This clause only supports fast acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Example:
-# snmp_access allow snmppublic localhost
-# snmp_access deny all
-#Default:
-# snmp_access deny all
-
-# TAG: snmp_incoming_address
-#Default:
-# snmp_incoming_address any_addr
-
-# TAG: snmp_outgoing_address
-# Just like 'udp_incoming_address', but for the SNMP port.
-#
-# snmp_incoming_address is used for the SNMP socket receiving
-# messages from SNMP agents.
-# snmp_outgoing_address is used for SNMP packets returned to SNMP
-# agents.
-#
-# The default snmp_incoming_address is to listen on all
-# available network interfaces.
-#
-# If snmp_outgoing_address is not set it will use the same socket
-# as snmp_incoming_address. Only change this if you want to have
-# SNMP replies sent using another address than where this Squid
-# listens for SNMP queries.
-#
-# NOTE, snmp_incoming_address and snmp_outgoing_address can not have
-# the same value since they both use port 3401.
-#Default:
-# snmp_outgoing_address no_addr
-
-# ICP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: icp_port
-# The port number where Squid sends and receives ICP queries to
-# and from neighbor caches. The standard UDP port for ICP is 3130.
-# Default is disabled (0).
-#
-# Example:
-# icp_port 3130
-#Default:
-# icp_port 0
-
-# TAG: htcp_port
-# The port number where Squid sends and receives HTCP queries to
-# and from neighbor caches. To turn it on you want to set it to
-# 4827. By default it is set to "0" (disabled).
-#
-# Example:
-# htcp_port 4827
-#Default:
-# htcp_port 0
-
-# TAG: log_icp_queries on|off
-# If set, ICP queries are logged to access.log. You may wish
-# do disable this if your ICP load is VERY high to speed things
-# up or to simplify log analysis.
-#Default:
-# log_icp_queries on
-
-# TAG: udp_incoming_address
-# udp_incoming_address is used for UDP packets received from other
-# caches.
-#
-# The default behavior is to not bind to any specific address.
-#
-# Only change this if you want to have all UDP queries received on
-# a specific interface/address.
-#
-# NOTE: udp_incoming_address is used by the ICP, HTCP, and DNS
-# modules. Altering it will affect all of them in the same manner.
-#
-# see also; udp_outgoing_address
-#
-# NOTE, udp_incoming_address and udp_outgoing_address can not
-# have the same value since they both use the same port.
-#Default:
-# udp_incoming_address any_addr
-
-# TAG: udp_outgoing_address
-# udp_outgoing_address is used for UDP packets sent out to other
-# caches.
-#
-# The default behavior is to not bind to any specific address.
-#
-# Instead it will use the same socket as udp_incoming_address.
-# Only change this if you want to have UDP queries sent using another
-# address than where this Squid listens for UDP queries from other
-# caches.
-#
-# NOTE: udp_outgoing_address is used by the ICP, HTCP, and DNS
-# modules. Altering it will affect all of them in the same manner.
-#
-# see also; udp_incoming_address
-#
-# NOTE, udp_incoming_address and udp_outgoing_address can not
-# have the same value since they both use the same port.
-#Default:
-# udp_outgoing_address no_addr
-
-# TAG: icp_hit_stale on|off
-# If you want to return ICP_HIT for stale cache objects, set this
-# option to 'on'. If you have sibling relationships with caches
-# in other administrative domains, this should be 'off'. If you only
-# have sibling relationships with caches under your control,
-# it is probably okay to set this to 'on'.
-# If set to 'on', your siblings should use the option "allow-miss"
-# on their cache_peer lines for connecting to you.
-#Default:
-# icp_hit_stale off
-
-# TAG: minimum_direct_hops
-# If using the ICMP pinging stuff, do direct fetches for sites
-# which are no more than this many hops away.
-#Default:
-# minimum_direct_hops 4
-
-# TAG: minimum_direct_rtt
-# If using the ICMP pinging stuff, do direct fetches for sites
-# which are no more than this many rtt milliseconds away.
-#Default:
-# minimum_direct_rtt 400
-
-# TAG: netdb_low
-#Default:
-# netdb_low 900
-
-# TAG: netdb_high
-# The low and high water marks for the ICMP measurement
-# database. These are counts, not percents. The defaults are
-# 900 and 1000. When the high water mark is reached, database
-# entries will be deleted until the low mark is reached.
-#Default:
-# netdb_high 1000
-
-# TAG: netdb_ping_period
-# The minimum period for measuring a site. There will be at
-# least this much delay between successive pings to the same
-# network. The default is five minutes.
-#Default:
-# netdb_ping_period 5 minutes
-
-# TAG: query_icmp on|off
-# If you want to ask your peers to include ICMP data in their ICP
-# replies, enable this option.
-#
-# If your peer has configured Squid (during compilation) with
-# '--enable-icmp' that peer will send ICMP pings to origin server
-# sites of the URLs it receives. If you enable this option the
-# ICP replies from that peer will include the ICMP data (if available).
-# Then, when choosing a parent cache, Squid will choose the parent with
-# the minimal RTT to the origin server. When this happens, the
-# hierarchy field of the access.log will be
-# "CLOSEST_PARENT_MISS". This option is off by default.
-#Default:
-# query_icmp off
-
-# TAG: test_reachability on|off
-# When this is 'on', ICP MISS replies will be ICP_MISS_NOFETCH
-# instead of ICP_MISS if the target host is NOT in the ICMP
-# database, or has a zero RTT.
-#Default:
-# test_reachability off
-
-# TAG: icp_query_timeout (msec)
-# Normally Squid will automatically determine an optimal ICP
-# query timeout value based on the round-trip-time of recent ICP
-# queries. If you want to override the value determined by
-# Squid, set this 'icp_query_timeout' to a non-zero value. This
-# value is specified in MILLISECONDS, so, to use a 2-second
-# timeout (the old default), you would write:
-#
-# icp_query_timeout 2000
-#Default:
-# icp_query_timeout 0
-
-# TAG: maximum_icp_query_timeout (msec)
-# Normally the ICP query timeout is determined dynamically. But
-# sometimes it can lead to very large values (say 5 seconds).
-# Use this option to put an upper limit on the dynamic timeout
-# value. Do NOT use this option to always use a fixed (instead
-# of a dynamic) timeout value. To set a fixed timeout see the
-# 'icp_query_timeout' directive.
-#Default:
-# maximum_icp_query_timeout 2000
-
-# TAG: minimum_icp_query_timeout (msec)
-# Normally the ICP query timeout is determined dynamically. But
-# sometimes it can lead to very small timeouts, even lower than
-# the normal latency variance on your link due to traffic.
-# Use this option to put an lower limit on the dynamic timeout
-# value. Do NOT use this option to always use a fixed (instead
-# of a dynamic) timeout value. To set a fixed timeout see the
-# 'icp_query_timeout' directive.
-#Default:
-# minimum_icp_query_timeout 5
-
-# TAG: background_ping_rate time-units
-# Controls how often the ICP pings are sent to siblings that
-# have background-ping set.
-#Default:
-# background_ping_rate 10 seconds
-
-# MULTICAST ICP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: mcast_groups
-# This tag specifies a list of multicast groups which your server
-# should join to receive multicasted ICP queries.
-#
-# NOTE! Be very careful what you put here! Be sure you
-# understand the difference between an ICP _query_ and an ICP
-# _reply_. This option is to be set only if you want to RECEIVE
-# multicast queries. Do NOT set this option to SEND multicast
-# ICP (use cache_peer for that). ICP replies are always sent via
-# unicast, so this option does not affect whether or not you will
-# receive replies from multicast group members.
-#
-# You must be very careful to NOT use a multicast address which
-# is already in use by another group of caches.
-#
-# If you are unsure about multicast, please read the Multicast
-# chapter in the Squid FAQ (http://www.squid-cache.org/FAQ/).
-#
-# Usage: mcast_groups 239.128.16.128 224.0.1.20
-#
-# By default, Squid doesn't listen on any multicast groups.
-#Default:
-# none
-
-# TAG: mcast_miss_addr
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_STREAM define
-#
-# If you enable this option, every "cache miss" URL will
-# be sent out on the specified multicast address.
-#
-# Do not enable this option unless you are are absolutely
-# certain you understand what you are doing.
-#Default:
-# mcast_miss_addr no_addr
-
-# TAG: mcast_miss_ttl
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_STREAM define
-#
-# This is the time-to-live value for packets multicasted
-# when multicasting off cache miss URLs is enabled. By
-# default this is set to 'site scope', i.e. 16.
-#Default:
-# mcast_miss_ttl 16
-
-# TAG: mcast_miss_port
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_STREAM define
-#
-# This is the port number to be used in conjunction with
-# 'mcast_miss_addr'.
-#Default:
-# mcast_miss_port 3135
-
-# TAG: mcast_miss_encode_key
-# Note: This option is only available if Squid is rebuilt with the
-# -DMULTICAST_MISS_STREAM define
-#
-# The URLs that are sent in the multicast miss stream are
-# encrypted. This is the encryption key.
-#Default:
-# mcast_miss_encode_key XXXXXXXXXXXXXXXX
-
-# TAG: mcast_icp_query_timeout (msec)
-# For multicast peers, Squid regularly sends out ICP "probes" to
-# count how many other peers are listening on the given multicast
-# address. This value specifies how long Squid should wait to
-# count all the replies. The default is 2000 msec, or 2
-# seconds.
-#Default:
-# mcast_icp_query_timeout 2000
-
-# INTERNAL ICON OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: icon_directory
-# Where the icons are stored. These are normally kept in
-# /usr/share/squid3/icons
-#Default:
-# icon_directory /usr/share/squid3/icons
-
-# TAG: global_internal_static
-# This directive controls is Squid should intercept all requests for
-# /squid-internal-static/ no matter which host the URL is requesting
-# (default on setting), or if nothing special should be done for
-# such URLs (off setting). The purpose of this directive is to make
-# icons etc work better in complex cache hierarchies where it may
-# not always be possible for all corners in the cache mesh to reach
-# the server generating a directory listing.
-#Default:
-# global_internal_static on
-
-# TAG: short_icon_urls
-# If this is enabled Squid will use short URLs for icons.
-# If disabled it will revert to the old behavior of including
-# it's own name and port in the URL.
-#
-# If you run a complex cache hierarchy with a mix of Squid and
-# other proxies you may need to disable this directive.
-#Default:
-# short_icon_urls on
-
-# ERROR PAGE OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: error_directory
-# If you wish to create your own versions of the default
-# error files to customize them to suit your company copy
-# the error/template files to another directory and point
-# this tag at them.
-#
-# WARNING: This option will disable multi-language support
-# on error pages if used.
-#
-# The squid developers are interested in making squid available in
-# a wide variety of languages. If you are making translations for a
-# language that Squid does not currently provide please consider
-# contributing your translation back to the project.
-# http://wiki.squid-cache.org/Translations
-#
-# The squid developers working on translations are happy to supply drop-in
-# translated error files in exchange for any new language contributions.
-#Default:
-# none
-
-# TAG: error_default_language
-# Set the default language which squid will send error pages in
-# if no existing translation matches the clients language
-# preferences.
-#
-# If unset (default) generic English will be used.
-#
-# The squid developers are interested in making squid available in
-# a wide variety of languages. If you are interested in making
-# translations for any language see the squid wiki for details.
-# http://wiki.squid-cache.org/Translations
-#Default:
-# none
-
-# TAG: error_log_languages
-# Log to cache.log what languages users are attempting to
-# auto-negotiate for translations.
-#
-# Successful negotiations are not logged. Only failures
-# have meaning to indicate that Squid may need an upgrade
-# of its error page translations.
-#Default:
-# error_log_languages on
-
-# TAG: err_page_stylesheet
-# CSS Stylesheet to pattern the display of Squid default error pages.
-#
-# For information on CSS see http://www.w3.org/Style/CSS/
-#Default:
-# err_page_stylesheet /etc/squid3/errorpage.css
-
-# TAG: err_html_text
-# HTML text to include in error messages. Make this a "mailto"
-# URL to your admin address, or maybe just a link to your
-# organizations Web page.
-#
-# To include this in your error messages, you must rewrite
-# the error template files (found in the "errors" directory).
-# Wherever you want the 'err_html_text' line to appear,
-# insert a %L tag in the error template file.
-#Default:
-# none
-
-# TAG: email_err_data on|off
-# If enabled, information about the occurred error will be
-# included in the mailto links of the ERR pages (if %W is set)
-# so that the email body contains the data.
-# Syntax is <A HREF="mailto:%w%W">%w</A>
-#Default:
-# email_err_data on
-
-# TAG: deny_info
-# Usage: deny_info err_page_name acl
-# or deny_info http://... acl
-# or deny_info TCP_RESET acl
-#
-# This can be used to return a ERR_ page for requests which
-# do not pass the 'http_access' rules. Squid remembers the last
-# acl it evaluated in http_access, and if a 'deny_info' line exists
-# for that ACL Squid returns a corresponding error page.
-#
-# The acl is typically the last acl on the http_access deny line which
-# denied access. The exceptions to this rule are:
-# - When Squid needs to request authentication credentials. It's then
-# the first authentication related acl encountered
-# - When none of the http_access lines matches. It's then the last
-# acl processed on the last http_access line.
-#
-# NP: If providing your own custom error pages with error_directory
-# you may also specify them by your custom file name:
-# Example: deny_info ERR_CUSTOM_ACCESS_DENIED bad_guys
-#
-# Alternatively you can specify an error URL. The browsers will
-# get redirected (302 or 307) to the specified URL. %s in the redirection
-# URL will be replaced by the requested URL.
-#
-# Alternatively you can tell Squid to reset the TCP connection
-# by specifying TCP_RESET.
-#Default:
-# none
-
-# OPTIONS INFLUENCING REQUEST FORWARDING
-# -----------------------------------------------------------------------------
-
-# TAG: nonhierarchical_direct
-# By default, Squid will send any non-hierarchical requests
-# (matching hierarchy_stoplist or not cacheable request type) direct
-# to origin servers.
-#
-# If you set this to off, Squid will prefer to send these
-# requests to parents.
-#
-# Note that in most configurations, by turning this off you will only
-# add latency to these request without any improvement in global hit
-# ratio.
-#
-# If you are inside an firewall see never_direct instead of
-# this directive.
-#Default:
-# nonhierarchical_direct on
-
-# TAG: prefer_direct
-# Normally Squid tries to use parents for most requests. If you for some
-# reason like it to first try going direct and only use a parent if
-# going direct fails set this to on.
-#
-# By combining nonhierarchical_direct off and prefer_direct on you
-# can set up Squid to use a parent as a backup path if going direct
-# fails.
-#
-# Note: If you want Squid to use parents for all requests see
-# the never_direct directive. prefer_direct only modifies how Squid
-# acts on cacheable requests.
-#Default:
-# prefer_direct off
-
-# TAG: always_direct
-# Usage: always_direct allow|deny [!]aclname ...
-#
-# Here you can use ACL elements to specify requests which should
-# ALWAYS be forwarded by Squid to the origin servers without using
-# any peers. For example, to always directly forward requests for
-# local servers ignoring any parents or siblings you may have use
-# something like:
-#
-# acl local-servers dstdomain my.domain.net
-# always_direct allow local-servers
-#
-# To always forward FTP requests directly, use
-#
-# acl FTP proto FTP
-# always_direct allow FTP
-#
-# NOTE: There is a similar, but opposite option named
-# 'never_direct'. You need to be aware that "always_direct deny
-# foo" is NOT the same thing as "never_direct allow foo". You
-# may need to use a deny rule to exclude a more-specific case of
-# some other rule. Example:
-#
-# acl local-external dstdomain external.foo.net
-# acl local-servers dstdomain .foo.net
-# always_direct deny local-external
-# always_direct allow local-servers
-#
-# NOTE: If your goal is to make the client forward the request
-# directly to the origin server bypassing Squid then this needs
-# to be done in the client configuration. Squid configuration
-# can only tell Squid how Squid should fetch the object.
-#
-# NOTE: This directive is not related to caching. The replies
-# is cached as usual even if you use always_direct. To not cache
-# the replies see the 'cache' directive.
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# none
-
-# TAG: never_direct
-# Usage: never_direct allow|deny [!]aclname ...
-#
-# never_direct is the opposite of always_direct. Please read
-# the description for always_direct if you have not already.
-#
-# With 'never_direct' you can use ACL elements to specify
-# requests which should NEVER be forwarded directly to origin
-# servers. For example, to force the use of a proxy for all
-# requests, except those in your local domain use something like:
-#
-# acl local-servers dstdomain .foo.net
-# never_direct deny local-servers
-# never_direct allow all
-#
-# or if Squid is inside a firewall and there are local intranet
-# servers inside the firewall use something like:
-#
-# acl local-intranet dstdomain .foo.net
-# acl local-external dstdomain external.foo.net
-# always_direct deny local-external
-# always_direct allow local-intranet
-# never_direct allow all
-#
-# This clause supports both fast and slow acl types.
-# See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.
-#Default:
-# none
-
-# ADVANCED NETWORKING OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: incoming_icp_average
-#Default:
-# incoming_icp_average 6
-
-# TAG: incoming_http_average
-#Default:
-# incoming_http_average 4
-
-# TAG: incoming_dns_average
-#Default:
-# incoming_dns_average 4
-
-# TAG: min_icp_poll_cnt
-#Default:
-# min_icp_poll_cnt 8
-
-# TAG: min_dns_poll_cnt
-#Default:
-# min_dns_poll_cnt 8
-
-# TAG: min_http_poll_cnt
-# Heavy voodoo here. I can't even believe you are reading this.
-# Are you crazy? Don't even think about adjusting these unless
-# you understand the algorithms in comm_select.c first!
-#Default:
-# min_http_poll_cnt 8
-
-# TAG: accept_filter
-# FreeBSD:
-#
-# The name of an accept(2) filter to install on Squid's
-# listen socket(s). This feature is perhaps specific to
-# FreeBSD and requires support in the kernel.
-#
-# The 'httpready' filter delays delivering new connections
-# to Squid until a full HTTP request has been received.
-# See the accf_http(9) man page for details.
-#
-# The 'dataready' filter delays delivering new connections
-# to Squid until there is some data to process.
-# See the accf_dataready(9) man page for details.
-#
-# Linux:
-#
-# The 'data' filter delays delivering of new connections
-# to Squid until there is some data to process by TCP_ACCEPT_DEFER.
-# You may optionally specify a number of seconds to wait by
-# 'data=N' where N is the number of seconds. Defaults to 30
-# if not specified. See the tcp(7) man page for details.
-#EXAMPLE:
-## FreeBSD
-#accept_filter httpready
-## Linux
-#accept_filter data
-#Default:
-# none
-
-# TAG: client_ip_max_connections
-# Set an absolute limit on the number of connections a single
-# client IP can use. Any more than this and Squid will begin to drop
-# new connections from the client until it closes some links.
-#
-# Note that this is a global limit. It affects all HTTP, HTCP, Gopher and FTP
-# connections from the client. For finer control use the ACL access controls.
-#
-# Requires client_db to be enabled (the default).
-#
-# WARNING: This may noticably slow down traffic received via external proxies
-# or NAT devices and cause them to rebound error messages back to their clients.
-#Default:
-# client_ip_max_connections -1
-
-# TAG: tcp_recv_bufsize (bytes)
-# Size of receive buffer to set for TCP sockets. Probably just
-# as easy to change your kernel's default. Set to zero to use
-# the default buffer size.
-#Default:
-# tcp_recv_bufsize 0 bytes
-
-# ICAP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: icap_enable on|off
-# If you want to enable the ICAP module support, set this to on.
-#Default:
-# icap_enable off
-
-# TAG: icap_connect_timeout
-# This parameter specifies how long to wait for the TCP connect to
-# the requested ICAP server to complete before giving up and either
-# terminating the HTTP transaction or bypassing the failure.
-#
-# The default for optional services is peer_connect_timeout.
-# The default for essential services is connect_timeout.
-# If this option is explicitly set, its value applies to all services.
-#Default:
-# none
-
-# TAG: icap_io_timeout time-units
-# This parameter specifies how long to wait for an I/O activity on
-# an established, active ICAP connection before giving up and
-# either terminating the HTTP transaction or bypassing the
-# failure.
-#
-# The default is read_timeout.
-#Default:
-# none
-
-# TAG: icap_service_failure_limit
-# The limit specifies the number of failures that Squid tolerates
-# when establishing a new TCP connection with an ICAP service. If
-# the number of failures exceeds the limit, the ICAP service is
-# not used for new ICAP requests until it is time to refresh its
-# OPTIONS. The per-service failure counter is reset to zero each
-# time Squid fetches new service OPTIONS.
-#
-# A negative value disables the limit. Without the limit, an ICAP
-# service will not be considered down due to connectivity failures
-# between ICAP OPTIONS requests.
-#Default:
-# icap_service_failure_limit 10
-
-# TAG: icap_service_revival_delay
-# The delay specifies the number of seconds to wait after an ICAP
-# OPTIONS request failure before requesting the options again. The
-# failed ICAP service is considered "down" until fresh OPTIONS are
-# fetched.
-#
-# The actual delay cannot be smaller than the hardcoded minimum
-# delay of 30 seconds.
-#Default:
-# icap_service_revival_delay 180
-
-# TAG: icap_preview_enable on|off
-# The ICAP Preview feature allows the ICAP server to handle the
-# HTTP message by looking only at the beginning of the message body
-# or even without receiving the body at all. In some environments,
-# previews greatly speedup ICAP processing.
-#
-# During an ICAP OPTIONS transaction, the server may tell Squid what
-# HTTP messages should be previewed and how big the preview should be.
-# Squid will not use Preview if the server did not request one.
-#
-# To disable ICAP Preview for all ICAP services, regardless of
-# individual ICAP server OPTIONS responses, set this option to "off".
-#Example:
-#icap_preview_enable off
-#Default:
-# icap_preview_enable on
-
-# TAG: icap_preview_size
-# The default size of preview data to be sent to the ICAP server.
-# -1 means no preview. This value might be overwritten on a per server
-# basis by OPTIONS requests.
-#Default:
-# icap_preview_size -1
-
-# TAG: icap_default_options_ttl
-# The default TTL value for ICAP OPTIONS responses that don't have
-# an Options-TTL header.
-#Default:
-# icap_default_options_ttl 60
-
-# TAG: icap_persistent_connections on|off
-# Whether or not Squid should use persistent connections to
-# an ICAP server.
-#Default:
-# icap_persistent_connections on
-
-# TAG: icap_send_client_ip on|off
-# If enabled, Squid shares HTTP client IP information with adaptation
-# services. For ICAP, Squid adds the X-Client-IP header to ICAP requests.
-# For eCAP, Squid sets the libecap::metaClientIp transaction option.
-#
-# See also: adaptation_uses_indirect_client
-#Default:
-# icap_send_client_ip off
-
-# TAG: icap_send_client_username on|off
-# This sends authenticated HTTP client username (if available) to
-# the ICAP service. The username value is encoded based on the
-# icap_client_username_encode option and is sent using the header
-# specified by the icap_client_username_header option.
-#Default:
-# icap_send_client_username off
-
-# TAG: icap_client_username_header
-# ICAP request header name to use for send_client_username.
-#Default:
-# icap_client_username_header X-Client-Username
-
-# TAG: icap_client_username_encode on|off
-# Whether to base64 encode the authenticated client username.
-#Default:
-# icap_client_username_encode off
-
-# TAG: icap_service
-# Defines a single ICAP service using the following format:
-#
-# icap_service service_name vectoring_point [options] service_url
-#
-# service_name: ID
-# an opaque identifier which must be unique in squid.conf
-#
-# vectoring_point: reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache
-# This specifies at which point of transaction processing the
-# ICAP service should be activated. *_postcache vectoring points
-# are not yet supported.
-#
-# service_url: icap://servername:port/servicepath
-# ICAP server and service location.
-#
-# ICAP does not allow a single service to handle both REQMOD and RESPMOD
-# transactions. Squid does not enforce that requirement. You can specify
-# services with the same service_url and different vectoring_points. You
-# can even specify multiple identical services as long as their
-# service_names differ.
-#
-#
-# Service options are separated by white space. ICAP services support
-# the following name=value options:
-#
-# bypass=on|off|1|0
-# If set to 'on' or '1', the ICAP service is treated as
-# optional. If the service cannot be reached or malfunctions,
-# Squid will try to ignore any errors and process the message as
-# if the service was not enabled. No all ICAP errors can be
-# bypassed. If set to 0, the ICAP service is treated as
-# essential and all ICAP errors will result in an error page
-# returned to the HTTP client.
-#
-# Bypass is off by default: services are treated as essential.
-#
-# routing=on|off|1|0
-# If set to 'on' or '1', the ICAP service is allowed to
-# dynamically change the current message adaptation plan by
-# returning a chain of services to be used next. The services
-# are specified using the X-Next-Services ICAP response header
-# value, formatted as a comma-separated list of service names.
-# Each named service should be configured in squid.conf and
-# should have the same method and vectoring point as the current
-# ICAP transaction. Services violating these rules are ignored.
-# An empty X-Next-Services value results in an empty plan which
-# ends the current adaptation.
-#
-# Routing is not allowed by default: the ICAP X-Next-Services
-# response header is ignored.
-#
-# ipv6=on|off
-# Only has effect on split-stack systems. The default on those systems
-# is to use IPv4-only connections. When set to 'on' this option will
-# make Squid use IPv6-only connections to contact this ICAP service.
-#
-# Older icap_service format without optional named parameters is
-# deprecated but supported for backward compatibility.
-#
-#Example:
-#icap_service svcBlocker reqmod_precache bypass=0 icap://icap1.mydomain.net:1344/reqmod
-#icap_service svcLogger reqmod_precache routing=on icap://icap2.mydomain.net:1344/respmod
-#Default:
-# none
-
-# TAG: icap_class
-# This deprecated option was documented to define an ICAP service
-# chain, even though it actually defined a set of similar, redundant
-# services, and the chains were not supported.
-#
-# To define a set of redundant services, please use the
-# adaptation_service_set directive. For service chains, use
-# adaptation_service_chain.
-#Default:
-# none
-
-# TAG: icap_access
-# This option is deprecated. Please use adaptation_access, which
-# has the same ICAP functionality, but comes with better
-# documentation, and eCAP support.
-#Default:
-# none
-
-# eCAP OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: ecap_enable on|off
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ecap option
-#
-# Controls whether eCAP support is enabled.
-#Default:
-# ecap_enable off
-
-# TAG: ecap_service
-# Note: This option is only available if Squid is rebuilt with the
-# --enable-ecap option
-#
-# Defines a single eCAP service
-#
-# ecap_service servicename vectoring_point bypass service_url
-#
-# vectoring_point = reqmod_precache|reqmod_postcache|respmod_precache|respmod_postcache
-# This specifies at which point of transaction processing the
-# eCAP service should be activated. *_postcache vectoring points
-# are not yet supported.
-# bypass = 1|0
-# If set to 1, the eCAP service is treated as optional. If the
-# service cannot be reached or malfunctions, Squid will try to
-# ignore any errors and process the message as if the service
-# was not enabled. No all eCAP errors can be bypassed.
-# If set to 0, the eCAP service is treated as essential and all
-# eCAP errors will result in an error page returned to the
-# HTTP client.
-# service_url = ecap://vendor/service_name?custom&cgi=style&parameters=optional
-#
-#Example:
-#ecap_service service_1 reqmod_precache 0 ecap://filters-R-us/leakDetector?on_error=block
-#ecap_service service_2 respmod_precache 1 icap://filters-R-us/virusFilter?config=/etc/vf.cfg
-#Default:
-# none
-
-# TAG: loadable_modules
-# Instructs Squid to load the specified dynamic module(s) or activate
-# preloaded module(s).
-#Example:
-#loadable_modules /usr/lib/MinimalAdapter.so
-#Default:
-# none
-
-# MESSAGE ADAPTATION OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: adaptation_service_set
-#
-# Configures an ordered set of similar, redundant services. This is
-# useful when hot standby or backup adaptation servers are available.
-#
-# adaptation_service_set set_name service_name1 service_name2 ...
-#
-# The named services are used in the set declaration order. The first
-# applicable adaptation service from the set is used first. The next
-# applicable service is tried if and only if the transaction with the
-# previous service fails and the message waiting to be adapted is still
-# intact.
-#
-# When adaptation starts, broken services are ignored as if they were
-# not a part of the set. A broken service is a down optional service.
-#
-# The services in a set must be attached to the same vectoring point
-# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD).
-#
-# If all services in a set are optional then adaptation failures are
-# bypassable. If all services in the set are essential, then a
-# transaction failure with one service may still be retried using
-# another service from the set, but when all services fail, the master
-# transaction fails as well.
-#
-# A set may contain a mix of optional and essential services, but that
-# is likely to lead to surprising results because broken services become
-# ignored (see above), making previously bypassable failures fatal.
-# Technically, it is the bypassability of the last failed service that
-# matters.
-#
-# See also: adaptation_access adaptation_service_chain
-#
-#Example:
-#adaptation_service_set svcBlocker urlFilterPrimary urlFilterBackup
-#adaptation service_set svcLogger loggerLocal loggerRemote
-#Default:
-# none
-
-# TAG: adaptation_service_chain
-#
-# Configures a list of complementary services that will be applied
-# one-by-one, forming an adaptation chain or pipeline. This is useful
-# when Squid must perform different adaptations on the same message.
-#
-# adaptation_service_chain chain_name service_name1 svc_name2 ...
-#
-# The named services are used in the chain declaration order. The first
-# applicable adaptation service from the chain is used first. The next
-# applicable service is applied to the successful adaptation results of
-# the previous service in the chain.
-#
-# When adaptation starts, broken services are ignored as if they were
-# not a part of the chain. A broken service is a down optional service.
-#
-# Request satisfaction terminates the adaptation chain because Squid
-# does not currently allow declaration of RESPMOD services at the
-# "reqmod_precache" vectoring point (see icap_service or ecap_service).
-#
-# The services in a chain must be attached to the same vectoring point
-# (e.g., pre-cache) and use the same adaptation method (e.g., REQMOD).
-#
-# A chain may contain a mix of optional and essential services. If an
-# essential adaptation fails (or the failure cannot be bypassed for
-# other reasons), the master transaction fails. Otherwise, the failure
-# is bypassed as if the failed adaptation service was not in the chain.
-#
-# See also: adaptation_access adaptation_service_set
-#
-#Example:
-#adaptation_service_chain svcRequest requestLogger urlFilter leakDetector
-#Default:
-# none
-
-# TAG: adaptation_access
-# Sends an HTTP transaction to an ICAP or eCAP adaptation service.
-#
-# adaptation_access service_name allow|deny [!]aclname...
-# adaptation_access set_name allow|deny [!]aclname...
-#
-# At each supported vectoring point, the adaptation_access
-# statements are processed in the order they appear in this
-# configuration file. Statements pointing to the following services
-# are ignored (i.e., skipped without checking their ACL):
-#
-# - services serving different vectoring points
-# - "broken-but-bypassable" services
-# - "up" services configured to ignore such transactions
-# (e.g., based on the ICAP Transfer-Ignore header).
-#
-# When a set_name is used, all services in the set are checked
-# using the same rules, to find the first applicable one. See
-# adaptation_service_set for details.
-#
-# If an access list is checked and there is a match, the
-# processing stops: For an "allow" rule, the corresponding
-# adaptation service is used for the transaction. For a "deny"
-# rule, no adaptation service is activated.
-#
-# It is currently not possible to apply more than one adaptation
-# service at the same vectoring point to the same HTTP transaction.
-#
-# See also: icap_service and ecap_service
-#
-#Example:
-#adaptation_access service_1 allow all
-#Default:
-# none
-
-# TAG: adaptation_service_iteration_limit
-# Limits the number of iterations allowed when applying adaptation
-# services to a message. If your longest adaptation set or chain
-# may have more than 16 services, increase the limit beyond its
-# default value of 16. If detecting infinite iteration loops sooner
-# is critical, make the iteration limit match the actual number
-# of services in your longest adaptation set or chain.
-#
-# Infinite adaptation loops are most likely with routing services.
-#
-# See also: icap_service routing=1
-#Default:
-# adaptation_service_iteration_limit 16
-
-# TAG: adaptation_masterx_shared_names
-# For each master transaction (i.e., the HTTP request and response
-# sequence, including all related ICAP and eCAP exchanges), Squid
-# maintains a table of metadata. The table entries are (name, value)
-# pairs shared among eCAP and ICAP exchanges. The table is destroyed
-# with the master transaction.
-#
-# This option specifies the table entry names that Squid must accept
-# from and forward to the adaptation transactions.
-#
-# An ICAP REQMOD or RESPMOD transaction may set an entry in the
-# shared table by returning an ICAP header field with a name
-# specified in adaptation_masterx_shared_names. Squid will store
-# and forward that ICAP header field to subsequent ICAP
-# transactions within the same master transaction scope.
-#
-# Only one shared entry name is supported at this time.
-#
-#Example:
-## share authentication information among ICAP services
-#adaptation_masterx_shared_names X-Subscriber-ID
-#Default:
-# none
-
-# TAG: icap_retry
-# This ACL determines which retriable ICAP transactions are
-# retried. Transactions that received a complete ICAP response
-# and did not have to consume or produce HTTP bodies to receive
-# that response are usually retriable.
-#
-# icap_retry allow|deny [!]aclname ...
-#
-# Squid automatically retries some ICAP I/O timeouts and errors
-# due to persistent connection race conditions.
-#
-# See also: icap_retry_limit
-#Default:
-# icap_retry deny all
-
-# TAG: icap_retry_limit
-# Limits the number of retries allowed. When set to zero (default),
-# no retries are allowed.
-#
-# Communication errors due to persistent connection race
-# conditions are unavoidable, automatically retried, and do not
-# count against this limit.
-#
-# See also: icap_retry
-#Default:
-# icap_retry_limit 0
-
-# DNS OPTIONS
-# -----------------------------------------------------------------------------
-
-# TAG: check_hostnames
-# For security and stability reasons Squid can check
-# hostnames for Internet standard RFC compliance. If you want
-# Squid to perform these checks turn this directive on.
-#Default:
-# check_hostnames off
-
-# TAG: allow_underscore
-# Underscore characters is not strictly allowed in Internet hostnames
-# but nevertheless used by many sites. Set this to off if you want
-# Squid to be strict about the standard.
-# This check is performed only when check_hostnames is set to on.
-#Default:
-# allow_underscore on
-
-# TAG: cache_dns_program
-# Note: This option is only available if Squid is rebuilt with the
-# --disable-internal-dns option
-#
-# Specify the location of the executable for dnslookup process.
-#Default:
-# cache_dns_program /usr/lib/squid3/dnsserver
-
-# TAG: dns_children
-# Note: This option is only available if Squid is rebuilt with the
-# --disable-internal-dns option
-#
-# The number of processes spawn to service DNS name lookups.
-# For heavily loaded caches on large servers, you should
-# probably increase this value to at least 10. The maximum
-# is 32. The default is 5.
-#
-# You must have at least one dnsserver process.
-#Default:
-# dns_children 5
-
-# TAG: dns_retransmit_interval
-# Initial retransmit interval for DNS queries. The interval is
-# doubled each time all configured DNS servers have been tried.
-#
-#Default:
-# dns_retransmit_interval 5 seconds
-
-# TAG: dns_timeout
-# DNS Query timeout. If no response is received to a DNS query
-# within this time all DNS servers for the queried domain
-# are assumed to be unavailable.
-#Default:
-# dns_timeout 2 minutes
-
-# TAG: dns_defnames on|off
-# Normally the RES_DEFNAMES resolver option is disabled
-# (see res_init(3)). This prevents caches in a hierarchy
-# from interpreting single-component hostnames locally. To allow
-# Squid to handle single-component names, enable this option.
-#Default:
-# dns_defnames off
-
-# TAG: dns_nameservers
-# Use this if you want to specify a list of DNS name servers
-# (IP addresses) to use instead of those given in your
-# /etc/resolv.conf file.
-# On Windows platforms, if no value is specified here or in
-# the /etc/resolv.conf file, the list of DNS name servers are
-# taken from the Windows registry, both static and dynamic DHCP
-# configurations are supported.
-#
-# Example: dns_nameservers 10.0.0.1 192.172.0.4
-#Default:
-# none
-
-# TAG: hosts_file
-# Location of the host-local IP name-address associations
-# database. Most Operating Systems have such a file on different
-# default locations:
-# - Un*X & Linux: /etc/hosts
-# - Windows NT/2000: %SystemRoot%\system32\drivers\etc\hosts
-# (%SystemRoot% value install default is c:\winnt)
-# - Windows XP/2003: %SystemRoot%\system32\drivers\etc\hosts
-# (%SystemRoot% value install default is c:\windows)
-# - Windows 9x/Me: %windir%\hosts
-# (%windir% value is usually c:\windows)
-# - Cygwin: /etc/hosts
-#
-# The file contains newline-separated definitions, in the
-# form ip_address_in_dotted_form name [name ...] names are
-# whitespace-separated. Lines beginning with an hash (#)
-# character are comments.
-#
-# The file is checked at startup and upon configuration.
-# If set to 'none', it won't be checked.
-# If append_domain is used, that domain will be added to
-# domain-local (i.e. not containing any dot character) host
-# definitions.
-#Default:
-# hosts_file /etc/hosts
-
-# TAG: append_domain
-# Appends local domain name to hostnames without any dots in
-# them. append_domain must begin with a period.
-#
-# Be warned there are now Internet names with no dots in
-# them using only top-domain names, so setting this may
-# cause some Internet sites to become unavailable.
-#
-#Example:
-# append_domain .yourdomain.com
-#Default:
-# none
-
-# TAG: ignore_unknown_nameservers
-# By default Squid checks that DNS responses are received
-# from the same IP addresses they are sent to. If they
-# don't match, Squid ignores the response and writes a warning
-# message to cache.log. You can allow responses from unknown
-# nameservers by setting this option to 'off'.
-#Default:
-# ignore_unknown_nameservers on
-
-# TAG: dns_v4_fallback
-# Standard practice with DNS is to lookup either A or AAAA records
-# and use the results if it succeeds. Only looking up the other if
-# the first attempt fails or otherwise produces no results.
-#
-# That policy however will cause squid to produce error pages for some
-# servers that advertise AAAA but are unreachable over IPv6.
-#
-# If this is ON squid will always lookup both AAAA and A, using both.
-# If this is OFF squid will lookup AAAA and only try A if none found.
-#
-# WARNING: There are some possibly unwanted side-effects with this on:
-# *) Doubles the load placed by squid on the DNS network.
-# *) May negatively impact connection delay times.
-#Default:
-# dns_v4_fallback on
-
-# TAG: dns_v4_first
-# With the IPv6 Internet being as fast or faster than IPv4 Internet
-# for most networks Squid prefers to contact websites over IPv6.
-#
-# This option reverses the order of preference to make Squid contact
-# dual-stack websites over IPv4 first. Squid will still perform both
-# IPv6 and IPv4 DNS lookups before connecting.
-#
-# WARNING:
-# This option will restrict the situations under which IPv6
-# connectivity is used (and tested), potentially hiding network
-# problem swhich would otherwise be detected and warned about.
-#Default:
-# dns_v4_first off
-
-# TAG: ipcache_size (number of entries)
-#Default:
-# ipcache_size 1024
-
-# TAG: ipcache_low (percent)
-#Default:
-# ipcache_low 90
-
-# TAG: ipcache_high (percent)
-# The size, low-, and high-water marks for the IP cache.
-#Default:
-# ipcache_high 95
-
-# TAG: fqdncache_size (number of entries)
-# Maximum number of FQDN cache entries.
-#Default:
-# fqdncache_size 1024
-
-# MISCELLANEOUS
-# -----------------------------------------------------------------------------
-
-# TAG: memory_pools on|off
-# If set, Squid will keep pools of allocated (but unused) memory
-# available for future use. If memory is a premium on your
-# system and you believe your malloc library outperforms Squid
-# routines, disable this.
-#Default:
-# memory_pools on
-
-# TAG: memory_pools_limit (bytes)
-# Used only with memory_pools on:
-# memory_pools_limit 50 MB
-#
-# If set to a non-zero value, Squid will keep at most the specified
-# limit of allocated (but unused) memory in memory pools. All free()
-# requests that exceed this limit will be handled by your malloc
-# library. Squid does not pre-allocate any memory, just safe-keeps
-# objects that otherwise would be free()d. Thus, it is safe to set
-# memory_pools_limit to a reasonably high value even if your
-# configuration will use less memory.
-#
-# If set to none, Squid will keep all memory it can. That is, there
-# will be no limit on the total amount of memory used for safe-keeping.
-#
-# To disable memory allocation optimization, do not set
-# memory_pools_limit to 0 or none. Set memory_pools to "off" instead.
-#
-# An overhead for maintaining memory pools is not taken into account
-# when the limit is checked. This overhead is close to four bytes per
-# object kept. However, pools may actually _save_ memory because of
-# reduced memory thrashing in your malloc library.
-#Default:
-# memory_pools_limit 5 MB
-
-# TAG: forwarded_for on|off|transparent|truncate|delete
-# If set to "on", Squid will append your client's IP address
-# in the HTTP requests it forwards. By default it looks like:
-#
-# X-Forwarded-For: 192.1.2.3
-#
-# If set to "off", it will appear as
-#
-# X-Forwarded-For: unknown
-#
-# If set to "transparent", Squid will not alter the
-# X-Forwarded-For header in any way.
-#
-# If set to "delete", Squid will delete the entire
-# X-Forwarded-For header.
-#
-# If set to "truncate", Squid will remove all existing
-# X-Forwarded-For entries, and place itself as the sole entry.
-#Default:
-# forwarded_for on
-
-# TAG: cachemgr_passwd
-# Specify passwords for cachemgr operations.
-#
-# Usage: cachemgr_passwd password action action ...
-#
-# Some valid actions are (see cache manager menu for a full list):
-# 5min
-# 60min
-# asndb
-# authenticator
-# cbdata
-# client_list
-# comm_incoming
-# config *
-# counters
-# delay
-# digest_stats
-# dns
-# events
-# filedescriptors
-# fqdncache
-# histograms
-# http_headers
-# info
-# io
-# ipcache
-# mem
-# menu
-# netdb
-# non_peers
-# objects
-# offline_toggle *
-# pconn
-# peer_select
-# reconfigure *
-# redirector
-# refresh
-# server_list
-# shutdown *
-# store_digest
-# storedir
-# utilization
-# via_headers
-# vm_objects
-#
-# * Indicates actions which will not be performed without a
-# valid password, others can be performed if not listed here.
-#
-# To disable an action, set the password to "disable".
-# To allow performing an action without a password, set the
-# password to "none".
-#
-# Use the keyword "all" to set the same password for all actions.
-#
-#Example:
-# cachemgr_passwd secret shutdown
-# cachemgr_passwd lesssssssecret info stats/objects
-# cachemgr_passwd disable all
-#Default:
-# none
-
-# TAG: client_db on|off
-# If you want to disable collecting per-client statistics,
-# turn off client_db here.
-#Default:
-# client_db on
-
-# TAG: refresh_all_ims on|off
-# When you enable this option, squid will always check
-# the origin server for an update when a client sends an
-# If-Modified-Since request. Many browsers use IMS
-# requests when the user requests a reload, and this
-# ensures those clients receive the latest version.
-#
-# By default (off), squid may return a Not Modified response
-# based on the age of the cached version.
-#Default:
-# refresh_all_ims off
-
-# TAG: reload_into_ims on|off
-# When you enable this option, client no-cache or ``reload''
-# requests will be changed to If-Modified-Since requests.
-# Doing this VIOLATES the HTTP standard. Enabling this
-# feature could make you liable for problems which it
-# causes.
-#
-# see also refresh_pattern for a more selective approach.
-#Default:
-# reload_into_ims off
-
-# TAG: maximum_single_addr_tries
-# This sets the maximum number of connection attempts for a
-# host that only has one address (for multiple-address hosts,
-# each address is tried once).
-#
-# The default value is one attempt, the (not recommended)
-# maximum is 255 tries. A warning message will be generated
-# if it is set to a value greater than ten.
-#
-# Note: This is in addition to the request re-forwarding which
-# takes place if Squid fails to get a satisfying response.
-#Default:
-# maximum_single_addr_tries 1
-
-# TAG: retry_on_error
-# If set to ON Squid will automatically retry requests when
-# receiving an error response with status 403 (Forbidden),
-# 500 (Internal Error), 501 or 503 (Service not available).
-# Status 502 and 504 (Gateway errors) are always retried.
-#
-# This is mainly useful if you are in a complex cache hierarchy to
-# work around access control errors.
-#
-# NOTE: This retry will attempt to find another working destination.
-# Which is different from the server which just failed.
-#Default:
-# retry_on_error off
-
-# TAG: as_whois_server
-# WHOIS server to query for AS numbers. NOTE: AS numbers are
-# queried only when Squid starts up, not for every request.
-#Default:
-# as_whois_server whois.ra.net
-
-# TAG: offline_mode
-# Enable this option and Squid will never try to validate cached
-# objects.
-#Default:
-# offline_mode off
-
-# TAG: uri_whitespace
-# What to do with requests that have whitespace characters in the
-# URI. Options:
-#
-# strip: The whitespace characters are stripped out of the URL.
-# This is the behavior recommended by RFC2396.
-# deny: The request is denied. The user receives an "Invalid
-# Request" message.
-# allow: The request is allowed and the URI is not changed. The
-# whitespace characters remain in the URI. Note the
-# whitespace is passed to redirector processes if they
-# are in use.
-# encode: The request is allowed and the whitespace characters are
-# encoded according to RFC1738. This could be considered
-# a violation of the HTTP/1.1
-# RFC because proxies are not allowed to rewrite URI's.
-# chop: The request is allowed and the URI is chopped at the
-# first whitespace. This might also be considered a
-# violation.
-#Default:
-# uri_whitespace strip
-
-# TAG: chroot
-# Specifies a directory where Squid should do a chroot() while
-# initializing. This also causes Squid to fully drop root
-# privileges after initializing. This means, for example, if you
-# use a HTTP port less than 1024 and try to reconfigure, you may
-# get an error saying that Squid can not open the port.
-#Default:
-# none
-
-# TAG: balance_on_multiple_ip
-# Modern IP resolvers in squid sort lookup results by preferred access.
-# By default squid will use these IP in order and only rotates to
-# the next listed when the most preffered fails.
-#
-# Some load balancing servers based on round robin DNS have been
-# found not to preserve user session state across requests
-# to different IP addresses.
-#
-# Enabling this directive Squid rotates IP's per request.
-#Default:
-# balance_on_multiple_ip off
-
-# TAG: pipeline_prefetch
-# To boost the performance of pipelined requests to closer
-# match that of a non-proxied environment Squid can try to fetch
-# up to two requests in parallel from a pipeline.
-#
-# Defaults to off for bandwidth management and access logging
-# reasons.
-#
-# WARNING: pipelining breaks NTLM and Negotiate/Kerberos authentication.
-#Default:
-# pipeline_prefetch off
-
-# TAG: high_response_time_warning (msec)
-# If the one-minute median response time exceeds this value,
-# Squid prints a WARNING with debug level 0 to get the
-# administrators attention. The value is in milliseconds.
-#Default:
-# high_response_time_warning 0
-
-# TAG: high_page_fault_warning
-# If the one-minute average page fault rate exceeds this
-# value, Squid prints a WARNING with debug level 0 to get
-# the administrators attention. The value is in page faults
-# per second.
-#Default:
-# high_page_fault_warning 0
-
-# TAG: high_memory_warning
-# If the memory usage (as determined by mallinfo) exceeds
-# this amount, Squid prints a WARNING with debug level 0 to get
-# the administrators attention.
-#Default:
-# high_memory_warning 0 KB
-
-# TAG: sleep_after_fork (microseconds)
-# When this is set to a non-zero value, the main Squid process
-# sleeps the specified number of microseconds after a fork()
-# system call. This sleep may help the situation where your
-# system reports fork() failures due to lack of (virtual)
-# memory. Note, however, if you have a lot of child
-# processes, these sleep delays will add up and your
-# Squid will not service requests for some amount of time
-# until all the child processes have been started.
-# On Windows value less then 1000 (1 milliseconds) are
-# rounded to 1000.
-#Default:
-# sleep_after_fork 0
-
-# TAG: windows_ipaddrchangemonitor on|off
-# On Windows Squid by default will monitor IP address changes and will
-# reconfigure itself after any detected event. This is very useful for
-# proxies connected to internet with dial-up interfaces.
-# In some cases (a Proxy server acting as VPN gateway is one) it could be
-# desiderable to disable this behaviour setting this to 'off'.
-# Note: after changing this, Squid service must be restarted.
-#Default:
-# windows_ipaddrchangemonitor on
-
-# TAG: max_filedescriptors
-# The maximum number of filedescriptors supported.
-#
-# The default "0" means Squid inherits the current ulimit setting.
-#
-# Note: Changing this requires a restart of Squid. Also
-# not all comm loops supports large values.
-#Default:
-# max_filedescriptors 0
-
diff --git a/hosts/profitbricks-build6-amd64/etc/sudoers.d/jenkins b/hosts/profitbricks-build6-amd64/etc/sudoers.d/jenkins
deleted file mode 100644
index b3e138e3..00000000
--- a/hosts/profitbricks-build6-amd64/etc/sudoers.d/jenkins
+++ /dev/null
@@ -1,53 +0,0 @@
-jenkins ALL= \
- NOPASSWD: /usr/sbin/debootstrap *, \
- /usr/bin/tee /schroots/*, \
- /usr/bin/tee -a /schroots/*, \
- /usr/bin/tee /etc/schroot/chroot.d/jenkins*, \
- /bin/chmod +x /schroots/*, \
- /usr/sbin/chroot /schroots/*, \
- /usr/sbin/chroot /chroots/*, \
- /usr/sbin/chroot /media/*, \
- /bin/ls -la /media/*, \
- /bin/rm -rf --one-file-system /chroots/*, \
- /bin/rm -rf --one-file-system /schroots/*, \
- /bin/rm -rf --one-file-system /srv/live-build/*, \
- /bin/rm -rf --one-file-system /srv/workspace/pbuilder/*, \
- /bin/cp -v *.iso /srv/live-build/results/*, \
- /bin/mv /chroots/* /schroots/*, \
- /bin/mv /schroots/* /schroots/*, \
- /bin/umount -l /chroots/*, \
- /bin/umount -l /schroots/*, \
- /bin/umount -l /media/*, \
- /bin/rmdir /media/*, \
- /bin/mount -o loop*, \
- /bin/mount --bind *, \
- /usr/bin/du *, \
- /bin/kill *, \
- /usr/bin/file *, \
- /bin/dd if=/dev/zero of=/dev/jenkins*, \
- /usr/bin/qemu-system-x86_64 *, \
- /usr/bin/qemu-img *, \
- /sbin/lvcreate *, /sbin/lvremove *, \
- /bin/mkdir -p /media/*, \
- /usr/bin/guestmount *, \
- /bin/cp -rv /media/*, \
- /bin/chown -R jenkins\:jenkins /var/lib/jenkins/jobs/*,\
- SETENV: NOPASSWD: /usr/sbin/pbuilder *, \
- SETENV: NOPASSWD: /usr/bin/timeout -k 12.1h 12h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder *, \
- SETENV: NOPASSWD: /usr/bin/timeout -k 12.1h 12h /usr/bin/ionice -c 3 /usr/bin/nice /usr/bin/unshare --uts -- /usr/sbin/pbuilder *, \
- SETENV: NOPASSWD: /usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder *, \
- SETENV: NOPASSWD: /usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/bin/unshare --uts -- /usr/sbin/pbuilder *, \
- /bin/mv /var/cache/pbuilder/*base*.tgz /var/cache/pbuilder/*base*.tgz, \
- /bin/rm /var/cache/pbuilder/*base*.tgz, \
- /bin/rm -v /var/cache/pbuilder/*base*.tgz, \
- /bin/rm /var/cache/pbuilder/result/*, \
- /usr/bin/dcmd rm *.changes, \
- /usr/bin/dcmd rm *.dsc, \
- /usr/bin/apt-get update, \
- /usr/bin/killall timeout, \
- /usr/sbin/slay 1111, \
- /usr/sbin/slay 2222, \
- /usr/sbin/slay jenkins
-
-# keep these environment variables
-Defaults env_keep += "http_proxy", env_reset
diff --git a/hosts/profitbricks-build6-amd64/etc/sudoers.d/jenkins-adm b/hosts/profitbricks-build6-amd64/etc/sudoers.d/jenkins-adm
deleted file mode 100644
index 3c357be2..00000000
--- a/hosts/profitbricks-build6-amd64/etc/sudoers.d/jenkins-adm
+++ /dev/null
@@ -1,7 +0,0 @@
-# allow member of the jenkins-adm group to sudo-to the jenkins-adm user (owner
-# of jenkins script) and the jenkins user itself
-%jenkins-adm ALL=(jenkins:jenkins) NOPASSWD: ALL
-%jenkins-adm ALL=(jenkins-adm:jenkins-adm) NOPASSWD: ALL
-# allow jenkins-adm to run everything as root
-%jenkins-adm ALL= NOPASSWD: ALL
-
diff --git a/hosts/profitbricks-build6-amd64/usr/local/bin/dsa-check-running-kernel b/hosts/profitbricks-build6-amd64/usr/local/bin/dsa-check-running-kernel
deleted file mode 100755
index 80f45bfb..00000000
--- a/hosts/profitbricks-build6-amd64/usr/local/bin/dsa-check-running-kernel
+++ /dev/null
@@ -1,252 +0,0 @@
-#!/bin/bash
-
-# Check if the running kernel has the same version string as the on-disk
-# kernel image.
-
-# Copyright 2008,2009,2011,2012,2013,2014 Peter Palfrader
-# Copyright 2009 Stephen Gran
-# Copyright 2010,2012,2013 Uli Martens
-# Copyright 2011 Alexander Reichle-Schmehl
-#
-# Permission is hereby granted, free of charge, to any person obtaining
-# a copy of this software and associated documentation files (the
-# "Software"), to deal in the Software without restriction, including
-# without limitation the rights to use, copy, modify, merge, publish,
-# distribute, sublicense, and/or sell copies of the Software, and to
-# permit persons to whom the Software is furnished to do so, subject to
-# the following conditions:
-#
-# The above copyright notice and this permission notice shall be
-# included in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-OK=0;
-WARNING=1;
-CRITICAL=2;
-UNKNOWN=3;
-
-get_offset() {
- local file needle
-
- file="$1"
- needle="$2"
-
- perl -e '
- undef $/;
- $i = 0; $k=<>;
- while (($i = index($k, "'"$needle"'", $i)) >= 0) {
- print $i++,"\n";
- }; ' < "$file"
-}
-
-get_avail() {
- # This is wrong, but leaves room for when we have to care for machines running
- # myfirstunix-image-0.1-dsa-arm
- local prefix="$1"; shift
-
- local kervers=$(uname -r)
-
- local metavers=''
-
- # DSA uses kernel versions of the form 2.6.29.3-dsa-dl380-oldxeon, where
- # Debian uses versions of the form 2.6.29-2-amd64
- if [ "${kervers#3}" != "$kervers" ]; then
- metavers=$(echo $kervers | sed -r -e 's/^3\.[0-9]+(\.[0-9])?+-[A-Za-z0-9\.]+-(.*)/\2/')
- elif [ "${kervers//dsa}" != "$kervers" ]; then
- metavers=$(echo $kervers | sed -r -e 's/^2\.(4|6)\.[0-9]+([\.0-9]+?)-(.*)/2.\1-\3/')
- else
- metavers=$(echo $kervers | sed -r -e 's/^2\.(4|6)\.[0-9]+-[A-Za-z0-9\.]+-(.*)/2.\1-\2/')
- fi
-
- # Attempt to track back to a metapackage failed. bail
- if [ "$metavers" = "$kervers" ]; then
- return 2
- fi
-
- # We're just going to give up if we can't find a matching metapackage
- # I tried being strict once, and it just caused a lot of headaches. We'll see how
- # being lax does for us
-
- local output=$(apt-cache policy ${prefix}-image-${metavers} 2>/dev/null)
- local metaavailvers=$(echo "$output" | grep '^ Candidate:' | awk '{print $2}')
- local metainstavers=$(echo "$output" | grep '^ Installed:' | awk '{print $2}')
-
- if [ -z "$metaavailvers" ] || [ "$metaavailvers" = '(none)' ]; then
- return 2
- fi
- if [ -z "$metainstavers" ] || [ "$metainstavers" = '(none)' ]; then
- return 2
- fi
-
- if [ "$metaavailvers" != "$metainstavers" ] ; then
- echo "${prefix}-image-${metavers} $metaavailvers available but $metainstavers installed"
- return 1
- fi
-
- local imagename=0
- # --no-all-versions show shows only the candidate
- for vers in $(apt-cache --no-all-versions show ${prefix}-image-${metavers} | sed -n 's/^Depends: //p' | tr ',' '\n' | tr -d ' ' | grep ${prefix}-image | awk '{print $1}' | sort -u); do
- if dpkg --compare-versions "1.$vers" gt "1.$imagename"; then
- imagename=$vers
- fi
- done
-
- if [ -z "$imagename" ] || [ "$imagename" = 0 ]; then
- return 2
- fi
-
- if [ "$imagename" != "${prefix}-image-${kervers}" ]; then
- if dpkg --compare-versions 1."$imagename" lt 1."${prefix}-image-${kervers}"; then
- return 2
- fi
- echo "$imagename" != "${prefix}-image-${kervers}"
- return 1
- fi
-
- local availvrs=$(apt-cache policy ${imagename} 2>/dev/null | grep '^ Candidate' | awk '{print $2}')
- local kernelversion=$(apt-cache policy ${prefix}-image-${kervers} 2>/dev/null | grep '^ Installed:' | awk '{print $2}')
-
- if [ "$availvrs" = "$kernelversion" ]; then
- return 0
- fi
-
- echo "$kernelversion != $availvrs"
- return 1
-}
-
-cat_vmlinux() {
- local image header filter hdroff
-
- image="$1"
- header="$2"
- filter="$3"
- hdroff="$4"
-
- get_offset "$image" $header | head -n 5 | while read off; do
- (if [ "$off" != 0 ]; then
- dd ibs="$((off+hdroff))" skip=1 count=0
- fi &&
- dd bs=512k) < "$image" 2>/dev/null | $filter 2>/dev/null
- done
-}
-
-get_image_linux() {
- local image
-
- image="$1"
-
- # gzip compressed image
- cat_vmlinux "$image" "\x1f\x8b\x08\x00" "zcat" 0
- cat_vmlinux "$image" "\x1f\x8b\x08\x08" "zcat" 0
- # lzma compressed image
- cat_vmlinux "$image" "\x00\x00\x00\x02\xff" "xzcat" -1
- cat_vmlinux "$image" "\x00\x00\x00\x04\xff" "xzcat" -1
- # xz compressed image
- cat_vmlinux "$image" "\xfd\x37\x7a\x58\x5a " "xzcat" 0
-
- echo "ERROR: Unable to extract kernel image." 2>&1
- exit 1
-}
-
-
-freebsd_check_running_version() {
- local imagefile="$1"; shift
-
- local r="$(uname -r)"
- local v="$(uname -v| sed -e 's/^#[0-9]*/&:/')"
-
- local q='@(#)FreeBSD '"$r $v"
-
- if zcat "$imagefile" | $STRINGS | grep -F -q "$q"; then
- echo "OK"
- else
- echo "not OK"
- fi
-}
-
-STRINGS="";
-if [ -x "$(which strings)" ]; then
- STRINGS="$(which strings)"
-elif [ -x "$(which busybox)" -a "$( echo foobar | $(which busybox) strings 2>/dev/null)" = "foobar" ]; then
- STRINGS="$(which busybox) strings"
-fi
-
-searched=""
-for on_disk in \
- "/boot/vmlinuz-`uname -r`"\
- "/boot/vmlinux-`uname -r`"\
- "/boot/kfreebsd-`uname -r`.gz"; do
-
- if [ -e "$on_disk" ]; then
- if [ -z "$STRINGS" ]; then
- echo "UNKNOWN: 'strings' command missing, perhaps install binutils or busybox?"
- exit $UNKNOWN
- fi
- if [ "${on_disk/vmlinu}" != "$on_disk" ]; then
- on_disk_version="`get_image_linux "$on_disk" | $STRINGS | grep 'Linux version' | head -n1`"
- if [ -x /usr/bin/lsb_release ] ; then
- vendor=$(lsb_release -i -s)
- if [ -n "$vendor" ] && [ "xDebian" != "x$vendor" ] ; then
- on_disk_version=$( echo $on_disk_version|sed -e "s/ ($vendor [[:alnum:]\.-]\+ [[:alnum:]\.]\+)//")
- fi
- fi
- [ -z "$on_disk_version" ] || break
- on_disk_version="`cat "$on_disk" | $STRINGS | grep 'Linux version' | head -n1`"
- [ -z "$on_disk_version" ] || break
-
- echo "UNKNOWN: Failed to get a version string from image $on_disk"
- exit $UNKNOWN
- else
- on_disk_version="$(zcat $on_disk | $STRINGS | grep Debian | head -n 1 | sed -e 's/Debian [[:alnum:]]\+ (\(.*\))/\1/')"
- fi
- fi
- searched="$searched $on_disk"
-done
-
-if ! [ -e "$on_disk" ]; then
- echo "WARNING: Did not find a kernel image (checked$searched) - I have no idea which kernel I am running"
- exit $WARNING
-fi
-
-if [ "$(uname -s)" = "Linux" ]; then
- running_version="`cat /proc/version`"
- if [ -z "$running_version" ] ; then
- echo "UNKNOWN: Failed to get a version string from running system"
- exit $UNKNOWN
- fi
-
- if [ "$running_version" != "$on_disk_version" ]; then
- echo "WARNING: Running kernel does not match on-disk kernel image: [$running_version != $on_disk_version]"
- exit $WARNING
- fi
-
- ret="$(get_avail linux)"
- if [ $? = 1 ]; then
- echo "WARNING: Kernel needs upgrade [$ret]"
- exit $WARNING
- fi
-else
- image_current=$(freebsd_check_running_version $on_disk)
- running_version="`uname -s` `uname -r` `uname -v`"
- if [ "$image_current" != "OK" ]; then
- approx_time="$(date -d "@`stat -c '%Y' "$on_disk"`" +"%Y-%m-%d %H:%M:%S")"
- echo "WARNING: Currently running kernel ($running_version) does not match on disk image (~ $approx_time)"
- exit $WARNING;
- fi
-
- ret="$(get_avail linux)"
- if [ $? = 1 ]; then
- echo "WARNING: Kernel needs upgrade [$ret]"
- exit $WARNING
- fi
-fi
-
-echo "OK: Running kernel matches on disk image: [$running_version]"
-exit $OK
diff --git a/hosts/profitbricks-build6-amd64/usr/local/sbin/nagios-check-libs b/hosts/profitbricks-build6-amd64/usr/local/sbin/nagios-check-libs
deleted file mode 100755
index 77b37805..00000000
--- a/hosts/profitbricks-build6-amd64/usr/local/sbin/nagios-check-libs
+++ /dev/null
@@ -1,204 +0,0 @@
-#!/usr/bin/perl -w
-
-# Copyright (C) 2005, 2006, 2007, 2008, 2012, 2015 Peter Palfrader <peter@palfrader.org>
-# 2012 Uli Martens <uli@youam.net>
-#
-# Permission is hereby granted, free of charge, to any person obtaining
-# a copy of this software and associated documentation files (the
-# "Software"), to deal in the Software without restriction, including
-# without limitation the rights to use, copy, modify, merge, publish,
-# distribute, sublicense, and/or sell copies of the Software, and to
-# permit persons to whom the Software is furnished to do so, subject to
-# the following conditions:
-#
-# The above copyright notice and this permission notice shall be
-# included in all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-use strict;
-use English;
-use Getopt::Long;
-
-$ENV{'PATH'} = '/bin:/sbin:/usr/bin:/usr/sbin';
-delete @ENV{'IFS', 'CDPATH', 'ENV', 'BASH_ENV'};
-
-my $LSOF = '/usr/bin/lsof -F0';
-my $VERSION = '0.2015012901';
-
-# nagios exit codes
-my $OK = 0;
-my $WARNING = 1;
-my $CRITICAL = 2;
-my $UNKNOWN = 3;
-
-my $params;
-my $config;
-
-Getopt::Long::config('bundling');
-
-sub dief {
- print STDERR @_;
- exit $UNKNOWN;
-}
-
-if (!GetOptions (
- '--help' => \$params->{'help'},
- '--version' => \$params->{'version'},
- '--quiet' => \$params->{'quiet'},
- '--verbose' => \$params->{'verbose'},
- '-v' => \$params->{'verbose'},
- '--config=s' => \$params->{'config'},
- )) {
- dief ("$PROGRAM_NAME: Usage: $PROGRAM_NAME [--help|--version] [--verbose] [--quiet] [--config=<CONFIGFILE>]\n");
-};
-if ($params->{'help'}) {
- print "$PROGRAM_NAME: Usage: $PROGRAM_NAME [--help|--version] [--verbose] [--quiet] [--config=<CONFIGFILE>]\n";
- print "Reports processes that are linked against libraries that no longer exist.\n";
- print "The optional config file can specify ignore rules - see the sample config file.\n";
- exit (0);
-};
-if ($params->{'version'}) {
- print "nagios-check-libs $VERSION\n";
- print "nagios check for availability of debian (security) updates\n";
- print "Copyright (c) 2005, 2006, 2007, 2008, 2012 Peter Palfrader <peter\@palfrader.org>\n";
- exit (0);
-};
-
-if (! defined $params->{'config'}) {
- $params->{'config'} = '/etc/nagios/check-libs.conf';
-} elsif (! -e $params->{'config'}) {
- dief("Config file $params->{'config'} does not exist.\n");
-}
-
-if (-e $params->{'config'}) {
- eval "use YAML::Syck; 1" or dief "you need YAML::Syck (libyaml-syck-perl) to load a config file";
- open(my $fh, '<', $params->{'config'}) or dief "Cannot open config file $params->{'config'}: $!";
- $config = LoadFile($fh);
- close($fh);
- if (!(ref($config) eq "HASH")) {
- dief("Loaded config is not a hash!\n");
- }
-} else {
- $config = {
- 'ignorelist' => [
- '$path =~ m#^/proc/#',
- '$path =~ m#^/var/tmp/#',
- '$path =~ m#^/SYS#',
- '$path =~ m#^/drm$# # xserver stuff',
- '$path =~ m#^/dev/zero#',
- '$path =~ m#^/dev/shm/#',
- ]
- };
-}
-
-if (! exists $config->{'ignorelist'}) {
- $config->{'ignorelist'} = [];
-} elsif (! (ref($config->{'ignorelist'}) eq 'ARRAY')) {
- dief("Config->ignorelist is not an array!\n");
-}
-
-
-my %processes;
-
-sub getPIDs($$) {
- my ($user, $process) = @_;
- return join(', ', sort keys %{ $processes{$user}->{$process} });
-};
-sub getProcs($) {
- my ($user) = @_;
-
- return join(', ', map { $_.' ('.getPIDs($user, $_).')' } (sort {$a cmp $b} keys %{ $processes{$user} }));
-};
-sub getUsers() {
- return join('; ', (map { $_.': '.getProcs($_) } (sort {$a cmp $b} keys %processes)));
-};
-sub inVserver() {
- my ($f, $key);
- if (-e "/proc/self/vinfo" ) {
- $f = "/proc/self/vinfo";
- $key = "XID";
- } else {
- $f = "/proc/self/status";
- $key = "s_context";
- };
- open(F, "< $f") or return 0;
- while (<F>) {
- my ($k, $v) = split(/: */, $_, 2);
- if ($k eq $key) {
- close F;
- return ($v > 0);
- };
- };
- close F;
- return 0;
-}
-
-my $INVSERVER = inVserver();
-
-print STDERR "Running $LSOF -n\n" if $params->{'verbose'};
-open (LSOF, "$LSOF -n|") or dief ("Cannot run $LSOF -n: $!\n");
-my @lsof=<LSOF>;
-close LSOF;
-if ($CHILD_ERROR) { # program failed
- dief("$LSOF -n returned with non-zero exit code: ".($CHILD_ERROR / 256)."\n");
-};
-
-my ($process, $pid, $user);
-LINE: for my $line (@lsof) {
- if ( $line =~ /^p/ ) {
- my %fields = map { m/^(.)(.*)$/ ; $1 => $2 } grep { defined $_ and length $_ >1} split /\0/, $line;
- $process = $fields{c};
- $pid = $fields{p};
- $user = $fields{L};
- next;
- }
-
- unless ( $line =~ /^f/ ) {
- dief("UNKNOWN strange line read from lsof\n");
- # don't print it because it contains NULL characters...
- }
-
- my %fields = map { m/^(.)(.*)$/ ; $1 => $2 } grep { defined $_ and length $_ >1} split /\0/, $line;
-
- my $fd = $fields{f};
- my $inode = $fields{i};
- my $path = $fields{n};
- if ($path =~ m/\.dpkg-/ || $path =~ m/\(deleted\)/ || $path =~ /path inode=/ || $path =~ m#/\.nfs# || $fd eq 'DEL') {
- my $deleted_in_path = ($path =~ m/\(deleted\)/ || $path =~ m/\.nfs/);
- next if ($deleted_in_path && $fd =~ /^[0-9]*$/); # Ignore deleted files that are open via normal file handles.
- next if ($deleted_in_path && $fd eq 'cwd'); # Ignore deleted directories that we happen to be in.
-
- $path =~ s/^\(deleted\)//; # in some cases "(deleted)" is at the beginning of the string
- for my $i (@{$config->{'ignorelist'}}) {
- my $ignore = eval($i);
- next LINE if $ignore;
- }
- next if ($INVSERVER && ($process eq 'init') && ($pid == 1) && ($user eq 'root'));
- if ( $params->{'verbose'} ) {
- print STDERR "adding $process($pid) because of [$path]:\n";
- print STDERR $line;
- }
- $processes{$user}->{$process}->{$pid} = 1;
- };
-};
-
-
-
-my $message='';
-my $exit = $OK;
-if (keys %processes) {
- $exit = $WARNING;
- $message = 'The following processes have libs linked that were upgraded: '. getUsers()."\n";
-} else {
- $message = "No upgraded libs linked in running processes\n" unless $params->{'quiet'};
-};
-
-print $message;
-exit $exit;