reproducible: Add two new armhf builders (jtk1b, jtx1b).

Temporarily disable two armhf build nodes (jtk1a down, ff64a too
slow).

Add an additional build job, as the new machines have more capacity
than the old.

Signed-off-by: Holger Levsen <holger@layer-acht.org>

5 files changed, 249 insertions, 0 deletions

diff --git a/hosts/jtk1b-armhf-rb/etc/munin/munin-node.conf b/hosts/jtk1b-armhf-rb/etc/munin/munin-node.conf
new file mode 100644
index 00000000..c986ea07
--- /dev/null
+++ b/hosts/jtk1b-armhf-rb/etc/munin/munin-node.conf
@@ -0,0 +1,66 @@
+#
+# Example config-file for munin-node
+#
+
+log_level 4
+log_file /var/log/munin/munin-node.log
+pid_file /var/run/munin/munin-node.pid
+
+background 1
+setsid 1
+
+user root
+group root
+
+# This is the timeout for the whole transaction.
+# Units are in sec. Default is 15 min
+#
+# global_timeout 900
+
+# This is the timeout for each plugin.
+# Units are in sec. Default is 1 min
+#
+# timeout 60
+
+# Regexps for files to ignore
+ignore_file [\#~]$
+ignore_file DEADJOE$
+ignore_file \.bak$
+ignore_file %$
+ignore_file \.dpkg-(tmp|new|old|dist)$
+ignore_file \.rpm(save|new)$
+ignore_file \.pod$
+
+# Set this if the client doesn't report the correct hostname when
+# telnetting to localhost, port 4949
+#
+#host_name localhost.localdomain
+
+# A list of addresses that are allowed to connect.  This must be a
+# regular expression, since Net::Server does not understand CIDR-style
+# network notation unless the perl module Net::CIDR is installed.  You
+# may repeat the allow line as many times as you'd like
+
+allow ^127\.0\.0\.1$
+allow ^::1$
+
+# If you have installed the Net::CIDR perl module, you can use one or more
+# cidr_allow and cidr_deny address/mask patterns.  A connecting client must
+# match any cidr_allow, and not match any cidr_deny.  Note that a netmask
+# *must* be provided, even if it's /32
+#
+# Example:
+#
+# cidr_allow 127.0.0.1/32
+# cidr_allow 192.0.2.0/24
+# cidr_deny  192.0.2.42/32
+
+# Which address to bind to;
+host *
+# host 127.0.0.1
+
+# And which port
+port 4949
+
+allow ^78\.137\.96\.196
+hostname jtk1b-armhf-rb.debian.net
diff --git a/hosts/jtk1b-armhf-rb/etc/munin/plugin-conf.d/df b/hosts/jtk1b-armhf-rb/etc/munin/plugin-conf.d/df
new file mode 100644
index 00000000..b3fdadcb
--- /dev/null
+++ b/hosts/jtk1b-armhf-rb/etc/munin/plugin-conf.d/df
@@ -0,0 +1,6 @@
+[df*]
+env.exclude none unknown iso9660 squashfs udf romfs ramfs debugfs devtmpfs sysfs
+env.exclude_re /srv/workspace/pbuilder /run /dev/disk/by /var/lib/schroot/mount /srv/workspace/varlibschroot /dev/shm /sys/fs/cgroup
+env.warning 92
+env.critical 98
+
diff --git a/hosts/jtk1b-armhf-rb/etc/munin/plugin-conf.d/diskstats b/hosts/jtk1b-armhf-rb/etc/munin/plugin-conf.d/diskstats
new file mode 100644
index 00000000..2d11f397
--- /dev/null
+++ b/hosts/jtk1b-armhf-rb/etc/munin/plugin-conf.d/diskstats
@@ -0,0 +1,4 @@
+[diskstats]
+env.trim_labels yes
+env.include_only /dev/sda
+
diff --git a/hosts/jtk1b-armhf-rb/etc/munin/plugin-conf.d/munin-node b/hosts/jtk1b-armhf-rb/etc/munin/plugin-conf.d/munin-node
new file mode 100644
index 00000000..e766928f
--- /dev/null
+++ b/hosts/jtk1b-armhf-rb/etc/munin/plugin-conf.d/munin-node
@@ -0,0 +1,117 @@
+# This file is used to configure how the plugins are invoked.
+# Place in /etc/munin/plugin-conf.d/ or corresponding directory.
+#
+# PLEASE NOTE: Changes in the plugin-conf.d directory are only
+# read at munin-node startup, so restart at any changes.
+#
+# user <user>         # Set the user to run the plugin as.
+# group <group>       # Set the group to run the plugin as.
+# command <command>   # Run <command> instead of the plugin. %c expands to
+#                       what would normally be run.
+# env.<variable> <value> # Sets <variable> in the plugin's environment, see the
+#                       individual plugins to find out which variables they
+#                       care about.
+
+
+[amavis]
+group adm
+env.MUNIN_MKTEMP /bin/mktemp -p /tmp/ $1
+env.amavislog /var/log/mail.info
+
+[apt]
+user root
+
+[courier_mta_mailqueue]
+group daemon
+
+[courier_mta_mailstats]
+group adm
+
+[courier_mta_mailvolume]
+group adm
+
+[cps*]
+user root
+
+[exim_mailqueue]
+group adm, (Debian-exim)
+
+[exim_mailstats]
+group adm, (Debian-exim)
+env.logdir /var/log/exim4/
+env.logname mainlog
+
+[fw_conntrack]
+user root
+
+[fw_forwarded_local]
+user root
+
+[hddtemp_smartctl]
+user root
+
+[hddtemp2]
+user root
+
+[if_*]
+user root
+
+[if_err_*]
+user nobody
+
+[ip_*]
+user root
+
+[ipmi_*]
+user root
+
+[mysql*]
+user root
+env.mysqlopts --defaults-file=/etc/mysql/debian.cnf
+env.mysqluser debian-sys-maint
+env.mysqlconnection DBI:mysql:mysql;mysql_read_default_file=/etc/mysql/debian.cnf
+
+[postfix_mailqueue]
+user postfix
+
+[postfix_mailstats]
+group adm
+
+[postfix_mailvolume]
+group adm
+env.logfile mail.log
+
+[smart_*]
+user root
+
+[vlan*]
+user root
+
+[ejabberd*]
+user ejabberd
+env.statuses available away chat xa
+env.days 1 7 30
+
+[dhcpd3]
+user root
+env.leasefile /var/lib/dhcp3/dhcpd.leases
+env.configfile /etc/dhcp3/dhcpd.conf
+
+[jmx_*]
+env.ip 127.0.0.1
+env.port 5400
+
+[samba]
+user root
+
+[munin_stats]
+user munin
+group munin
+
+[postgres_*]
+user postgres
+env.PGUSER postgres
+env.PGPORT 5432
+
+[fail2ban]
+user root
diff --git a/hosts/jtk1b-armhf-rb/etc/munin/plugins/jenkins_reproducible_builds b/hosts/jtk1b-armhf-rb/etc/munin/plugins/jenkins_reproducible_builds
new file mode 100755
index 00000000..e990c127
--- /dev/null
+++ b/hosts/jtk1b-armhf-rb/etc/munin/plugins/jenkins_reproducible_builds
@@ -0,0 +1,56 @@
+#!/bin/sh
+# -*- sh -*-
+
+: << =cut
+
+=head1 NAME
+
+jenkins_reproducible_builds - Plugin to measure number of reproducible builds running
+
+=head1 AUTHOR
+
+Contributed by Holger Levsen
+
+=head1 LICENSE
+
+GPLv2
+
+=head1 MAGIC MARKERS
+
+ #%# family=auto
+ #%# capabilities=autoconf
+
+=cut
+
+. $MUNIN_LIBDIR/plugins/plugin.sh
+
+if [ "$1" = "autoconf" ]; then
+	echo yes
+	exit 0
+fi
+
+JOB_PREFIXES="first second"
+if [ "$1" = "config" ]; then
+	echo 'graph_title Concurrent reproducible builds running'
+	echo 'graph_args --base 1000 -l 0 '
+	echo 'graph_scale no'
+	echo 'graph_total total'
+	echo 'graph_vlabel Concurrent reproducible builds running'
+	echo 'graph_category jenkins'
+	draw=AREA
+	for PREFIX in $JOB_PREFIXES ; do
+		echo "jenkins_reproducible_${PREFIX}_build.label $PREFIX build"
+		echo "jenkins_reproducible_${PREFIX}_build.draw $draw"
+		if [ "$draw" = "AREA" ] ; then draw=STACK ; fi
+	done
+	exit 0
+fi
+
+for PREFIX in $JOB_PREFIXES ; do
+	if [ "$PREFIX" = "first" ] ; then
+		NR=$(pgrep -fc "bin/bash /srv/jenkins/bin/reproducible_build.sh 1")
+	else
+		NR=$(pgrep -fc "bin/bash /srv/jenkins/bin/reproducible_build.sh 2")
+	fi
+	echo "jenkins_reproducible_${PREFIX}_build.value $NR"
+	done