stretch upgrade: squid3 --> squid

Signed-off-by: Holger Levsen <holger@layer-acht.org>

1 files changed, 24 insertions, 24 deletions

diff --git a/hosts/codethink-sled9-arm64/etc/squid3/squid.conf b/hosts/codethink-sled9-arm64/etc/squid/squid.conf
index d3a0a7f1..34be0ec5 100644
--- a/hosts/codethink-sled9-arm64/etc/squid3/squid.conf
+++ b/hosts/codethink-sled9-arm64/etc/squid/squid.conf
@@ -130,7 +130,7 @@
 #	If you want to use the traditional NCSA proxy authentication, set
 #	this line to something like
 #
-#	auth_param basic program /usr/lib/squid3/ncsa_auth /usr/etc/passwd
+#	auth_param basic program /usr/lib/squid/ncsa_auth /usr/etc/passwd
 #
 #	"utf8" on|off
 #	HTTP uses iso-latin-1 as characterset, while some authentication
@@ -198,7 +198,7 @@
 #	If you want to use a digest authenticator, set this line to
 #	something like
 #
-#	auth_param digest program /usr/lib/squid3/digest_pw_auth /usr/etc/digpass
+#	auth_param digest program /usr/lib/squid/digest_pw_auth /usr/etc/digpass
 #
 #	"utf8" on|off
 #	HTTP uses iso-latin-1 as characterset, while some authentication
@@ -260,7 +260,7 @@
 #	of type proxy_auth.  By default, the NTLM authenticator_program
 #	is not used.
 #
-#	auth_param ntlm program /usr/lib/squid3/ntlm_auth
+#	auth_param ntlm program /usr/lib/squid/ntlm_auth
 #
 #	"children" numberofchildren
 #	The number of authenticator processes to spawn (no default).
@@ -295,7 +295,7 @@
 #	The only supported program for this role is the ntlm_auth
 #	program distributed as part of Samba, version 4 or later.
 #
-#	auth_param negotiate program /usr/lib/squid3/ntlm_auth --helper-protocol=gss-spnego
+#	auth_param negotiate program /usr/lib/squid/ntlm_auth --helper-protocol=gss-spnego
 #
 #	"children" numberofchildren
 #	The number of authenticator processes to spawn (no default).
@@ -1603,11 +1603,11 @@ http_port 3128
 #       -DUSE_SSL_CRTD define
 #
 #	Specify the location and options of the executable for ssl_crtd process.
-#	/usr/lib/squid3/ssl_crtd program requires -s and -M parameters
+#	/usr/lib/squid/ssl_crtd program requires -s and -M parameters
 #	For more information use:
-#		/usr/lib/squid3/ssl_crtd -h
+#		/usr/lib/squid/ssl_crtd -h
 #Default:
-# sslcrtd_program /usr/lib/squid3/ssl_crtd -s /var/lib/ssl_db -M 4MB
+# sslcrtd_program /usr/lib/squid/ssl_crtd -s /var/lib/ssl_db -M 4MB
 
 #  TAG: sslcrtd_children
 # Note: This option is only available if Squid is rebuilt with the
@@ -2229,8 +2229,8 @@ http_port 3128
 #
 
 # Uncomment and adjust the following to add a disk cache directory.
-#cache_dir ufs /var/spool/squid3 100 16 256
-cache_dir ufs /var/spool/squid3 16384 16 1024
+#cache_dir ufs /var/spool/squid 100 16 256
+cache_dir ufs /var/spool/squid 4096 16 1024
 
 #  TAG: store_dir_select_algorithm
 #	Set this to 'round-robin' as an alternative.
@@ -2451,9 +2451,9 @@ maximum_object_size 153600 KB
 #	err, warning, notice, info, debug.
 #
 #	Default:
-#		access_log /var/log/squid3/access.log squid
+#		access_log /var/log/squid/access.log squid
 #Default:
-# access_log /var/log/squid3/access.log squid
+# access_log /var/log/squid/access.log squid
 
 #  TAG: icap_log
 #	ICAP log files record ICAP transaction summaries, one line per
@@ -2557,7 +2557,7 @@ maximum_object_size 153600 KB
 #	disable it.
 #
 #	Example:
-#		cache_store_log /var/log/squid3/store.log
+#		cache_store_log /var/log/squid/store.log
 #Default:
 # none
 
@@ -2636,7 +2636,7 @@ maximum_object_size 153600 KB
 #	this, but the default file contains examples and formatting
 #	information if you do.
 #Default:
-# mime_table /usr/share/squid3/mime.conf
+# mime_table /usr/share/squid/mime.conf
 
 #  TAG: log_mime_hdrs	on|off
 #	The Cache can record both the request and the response MIME
@@ -2672,7 +2672,7 @@ maximum_object_size 153600 KB
 #  TAG: pid_filename
 #	A filename to write the process-id to.  To disable, enter "none".
 #Default:
-# pid_filename /var/run/squid3.pid
+# pid_filename /var/run/squid.pid
 
 #  TAG: log_fqdn	on|off
 #	Turn this on if you wish to log fully qualified domain names
@@ -2723,7 +2723,7 @@ maximum_object_size 153600 KB
 #	A filename where Squid stores it's netdb state between restarts.
 #	To disable, enter "none".
 #Default:
-# netdb_filename /var/log/squid3/netdb.state
+# netdb_filename /var/log/squid/netdb.state
 
 # OPTIONS FOR TROUBLESHOOTING
 # -----------------------------------------------------------------------------
@@ -2733,7 +2733,7 @@ maximum_object_size 153600 KB
 #	your cache's behavior goes. You can increase the amount of data
 #	logged to this file and how often its rotated with "debug_options"
 #Default:
-# cache_log /var/log/squid3/cache.log
+# cache_log /var/log/squid/cache.log
 
 #  TAG: debug_options
 #	Logging options are set as section,level where each source file
@@ -2762,7 +2762,7 @@ maximum_object_size 153600 KB
 #
 
 # Leave coredumps in the first cache dir
-coredump_dir /var/spool/squid3
+coredump_dir /var/spool/squid
 
 # OPTIONS FOR FTP GATEWAYING
 # -----------------------------------------------------------------------------
@@ -2881,12 +2881,12 @@ coredump_dir /var/spool/squid3
 #	Note this is only useful if you have compiled in
 #	diskd as one of the store io modules.
 #Default:
-# diskd_program /usr/lib/squid3/diskd
+# diskd_program /usr/lib/squid/diskd
 
 #  TAG: unlinkd_program
 #	Specify the location of the executable for file deletion process.
 #Default:
-# unlinkd_program /usr/lib/squid3/unlinkd
+# unlinkd_program /usr/lib/squid/unlinkd
 
 #  TAG: pinger_program
 # Note: This option is only available if Squid is rebuilt with the
@@ -2894,7 +2894,7 @@ coredump_dir /var/spool/squid3
 #
 #	Specify the location of the executable for the pinger process.
 #Default:
-# pinger_program /usr/lib/squid3/pinger
+# pinger_program /usr/lib/squid/pinger
 
 #  TAG: pinger_enable
 # Note: This option is only available if Squid is rebuilt with the
@@ -4572,9 +4572,9 @@ refresh_pattern .		0	20%	4320
 
 #  TAG: icon_directory
 #	Where the icons are stored. These are normally kept in
-#	/usr/share/squid3/icons
+#	/usr/share/squid/icons
 #Default:
-# icon_directory /usr/share/squid3/icons
+# icon_directory /usr/share/squid/icons
 
 #  TAG: global_internal_static
 #	This directive controls is Squid should intercept all requests for
@@ -4649,7 +4649,7 @@ refresh_pattern .		0	20%	4320
 #
 #	For information on CSS see http://www.w3.org/Style/CSS/
 #Default:
-# err_page_stylesheet /etc/squid3/errorpage.css
+# err_page_stylesheet /etc/squid/errorpage.css
 
 #  TAG: err_html_text
 #	HTML text to include in error messages.  Make this a "mailto"
@@ -5338,7 +5338,7 @@ refresh_pattern .		0	20%	4320
 #
 #	Specify the location of the executable for dnslookup process.
 #Default:
-# cache_dns_program /usr/lib/squid3/dnsserver
+# cache_dns_program /usr/lib/squid/dnsserver
 
 #  TAG: dns_children
 # Note: This option is only available if Squid is rebuilt with the