add debian-edu main-server jobs

4 files changed, 843 insertions, 23 deletions

diff --git a/bin/g-i-installation.sh b/bin/g-i-installation.sh
index 271da6cb..09894bf3 100755
--- a/bin/g-i-installation.sh
+++ b/bin/g-i-installation.sh
@@ -163,7 +163,7 @@ bootstrap_system() {
 		debian_*_rescue*)
 			EXTRA_APPEND="$EXTRA_APPEND rescue/enable=true"
 			;;
-		debian-edu*_combi-server)
+		debian-edu*-server)
 			QEMU_OPTS="$QEMU_OPTS -net nic,vlan=1 -net user,vlan=1"
 			EXTRA_APPEND="$EXTRA_APPEND interface=eth0"
 			;;
@@ -212,7 +212,7 @@ boot_system() {
 		exit 1
 	fi
 	case $NAME in
-		debian-edu*_combi-server)
+		debian-edu*-server)
 			QEMU_OPTS="$QEMU_OPTS -net nic,vlan=1 -net user,vlan=1"
 			;;
 		*)	;;
@@ -650,7 +650,7 @@ save_logs() {
 	case $NAME in
 		debian-edu_*_workstation)	sudo guestmount -a $NAME.raw -m /dev/vg_system/root --ro $SYSTEM_MNT || ( echo "Warning: cannot mount /dev/vg_system/root" ; figlet "fail" )
 						;;
-		debian-edu_*_combi-server)	sudo guestmount -a $NAME.raw -m /dev/vg_system/root --ro $SYSTEM_MNT || ( echo "Warning: cannot mount /dev/vg_system/root" ; figlet "fail" )
+		debian-edu_*-server)		sudo guestmount -a $NAME.raw -m /dev/vg_system/root --ro $SYSTEM_MNT || ( echo "Warning: cannot mount /dev/vg_system/root" ; figlet "fail" )
 						sudo guestmount -a $NAME.raw -m /dev/vg_system/var -o nonempty --ro $SYSTEM_MNT/var || ( echo "Warning: cannot mount /dev/vg_system/var" ; figlet "fail" )
 						sudo guestmount -a $NAME.raw -m /dev/vg_system/usr -o nonempty --ro $SYSTEM_MNT/usr || ( echo "Warning: cannot mount /dev/vg_system/usr" ; figlet "fail" )
 						;;
@@ -677,7 +677,7 @@ save_logs() {
 	sync
 	case $NAME in
 		debian-edu_*_workstation)	;;
-		debian-edu_*_combi-server)	sudo umount -l $SYSTEM_MNT/var || ( echo "Warning: cannot un-mount $SYSTEM_MNT/var" ; figlet "fail" )
+		debian-edu_*-server)		sudo umount -l $SYSTEM_MNT/var || ( echo "Warning: cannot un-mount $SYSTEM_MNT/var" ; figlet "fail" )
 						sudo umount -l $SYSTEM_MNT/usr || ( echo "Warning: cannot un-mount $SYSTEM_MNT/usr" ; figlet "fail" )
 						;;
 		debian-edu_*)			sudo umount -l $SYSTEM_MNT/var || ( echo "Warning: cannot un-mount $SYSTEM_MNT/var" ; figlet "fail" )
diff --git a/d-i-preseed-cfgs/debian-edu_squeeze-test_main-server_preseed.cfg b/d-i-preseed-cfgs/debian-edu_squeeze-test_main-server_preseed.cfg
new file mode 100644
index 00000000..f0501fec
--- /dev/null
+++ b/d-i-preseed-cfgs/debian-edu_squeeze-test_main-server_preseed.cfg
@@ -0,0 +1,403 @@
+#### Contents of the preconfiguration file for Debian Edu squeeze-test
+### Localization
+# Preseeding only locale sets language, country and locale.
+d-i debian-installer/locale string en_US
+
+# The values can also be preseeded individually for greater flexibility.
+#d-i debian-installer/language string en
+#d-i debian-installer/country string NL
+#d-i debian-installer/locale string en_GB.UTF-8
+# Optionally specify additional locales to be generated.
+#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8
+
+# Keyboard selection.
+d-i console-keymaps-at/keymap select us
+d-i keyboard-configuration/xkb-keymap select us
+# d-i keyboard-configuration/toggle select No toggling
+
+### Network configuration
+# Disable network configuration entirely. This is useful for cdrom
+# installations on non-networked devices where the network questions,
+# warning and long timeouts are a nuisance.
+#d-i netcfg/enable boolean false
+
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+
+# To pick a particular interface instead:
+#d-i netcfg/choose_interface select eth0
+
+# To set a different link detection timeout (default is 3 seconds).
+# Values are interpreted as seconds.
+#di netcfg/link_detection_timeout string 10
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+#d-i netcfg/dhcp_timeout string 60
+
+# If you prefer to configure the network manually, uncomment this line and
+# the static network configuration below.
+#d-i netcfg/disable_dhcp boolean true
+
+# If you want the preconfiguration file to work on systems both with and
+# without a dhcp server, uncomment these lines and the static network
+# configuration below.
+#d-i netcfg/dhcp_failed note
+#d-i netcfg/dhcp_options select Configure network manually
+
+# Static network configuration.
+#d-i netcfg/get_nameservers string 192.168.1.1
+#d-i netcfg/get_ipaddress string 192.168.1.42
+#d-i netcfg/get_netmask string 255.255.255.0
+#d-i netcfg/get_gateway string 192.168.1.1
+#d-i netcfg/confirm_static boolean true
+
+# Any hostname and domain names assigned from dhcp take precedence over
+# values set here. However, setting the values still prevents the questions
+# from being shown, even if values come from dhcp.
+d-i netcfg/get_hostname string tjener
+d-i netcfg/get_domain string intern
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+# The wacky dhcp hostname that some ISPs use as a password of sorts.
+#d-i netcfg/dhcp_hostname string radish
+
+# If non-free firmware is needed for the network or other hardware, you can
+# configure the installer to always try to load it, without prompting. Or
+# change to false to disable asking.
+#d-i hw-detect/load_firmware boolean true
+
+### Network console
+# Use the following settings if you wish to make use of the network-console
+# component for remote installation over SSH. This only makes sense if you
+# intend to perform the remainder of the installation manually.
+#d-i anna/choose_modules string network-console
+
+# Enable the Debian Edu installer overrides
+d-i anna/choose_modules     multiselect     debian-edu-install-udeb: Execute Debian-Edu debian-installer profile
+
+#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
+#d-i network-console/password password r00tme
+#d-i network-console/password-again password r00tme
+
+### Mirror settings
+# If you select ftp, the mirror/country string does not need to be set.
+#d-i mirror/protocol string ftp
+d-i mirror/country string manual
+d-i mirror/http/hostname string ftp.de.debian.org
+d-i mirror/http/directory string /debian
+d-i mirror/http/proxy string http://10.0.2.1:3128/
+
+# Suite to install.
+#d-i mirror/suite string testing
+# Suite to use for loading installer components (optional).
+#d-i mirror/udeb/suite string testing
+
+### Account setup
+# Skip creation of a root account (normal user account will be able to
+# use sudo).
+#d-i passwd/root-login boolean false
+# Alternatively, to skip creation of a normal user account.
+#d-i passwd/make-user boolean false
+
+# Root password, either in clear text
+d-i passwd/root-password password r00tme
+d-i passwd/root-password-again password r00tme
+# or encrypted using an MD5 hash.
+#d-i passwd/root-password-crypted password [MD5 hash]
+
+# To create a normal user account.
+d-i passwd/user-fullname string Jenkins Testuser
+d-i passwd/username string jenkins
+# Normal user's password, either in clear text
+d-i passwd/user-password password insecure
+d-i passwd/user-password-again password insecure
+# or encrypted using an MD5 hash.
+#d-i passwd/user-password-crypted password [MD5 hash]
+# Create the first user with the specified UID instead of the default.
+#d-i passwd/user-uid string 1010
+
+# The user account will be added to some standard initial groups. To
+# override that, use this.
+#d-i passwd/user-default-groups string audio cdrom video
+
+### Clock and time zone setup
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Eastern
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+# NTP server to use. The default is almost always fine here.
+#d-i clock-setup/ntp-server string ntp.example.com
+
+### Partitioning
+## Partitioning example
+# If the system has free space you can choose to only partition that space.
+# This is only honoured if partman-auto/method (below) is not set.
+#d-i partman-auto/init_automatically_partition select biggest_free
+
+# Alternatively, you may specify a disk to partition. If the system has only
+# one disk the installer will default to using that, but otherwise the device
+# name must be given in traditional, non-devfs format (so e.g. /dev/hda or
+# /dev/sda, and not e.g. /dev/discs/disc0/disc).
+# For example, to use the first SCSI/SATA hard disk:
+#d-i partman-auto/disk string /dev/sda
+# In addition, you'll need to specify the method to use.
+# The presently available methods are:
+# - regular: use the usual partition types for your architecture
+# - lvm:     use LVM to partition the disk
+# - crypto:  use LVM within an encrypted partition
+d-i partman-auto/method string lvm
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+
+# You can choose one of the three predefined partitioning recipes:
+# - atomic: all files in one partition
+# - home:   separate /home partition
+# - multi:  separate /home, /usr, /var, and /tmp partitions
+d-i partman-auto/choose_recipe select atomic
+
+# Or provide a recipe of your own...
+# If you have a way to get a recipe file into the d-i environment, you can
+# just point at it.
+#d-i partman-auto/expert_recipe_file string /hd-media/recipe
+
+# If not, you can put an entire recipe into the preconfiguration file in one
+# (logical) line. This example creates a small /boot partition, suitable
+# swap, and uses the rest of the space for the root partition:
+#d-i partman-auto/expert_recipe string                         \
+#      boot-root ::                                            \
+#              40 50 100 ext3                                  \
+#                      $primary{ } $bootable{ }                \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ /boot }                     \
+#              .                                               \
+#              500 10000 1000000000 ext3                       \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ / }                         \
+#              .                                               \
+#              64 512 300% linux-swap                          \
+#                      method{ swap } format{ }                \
+#              .
+
+# The full recipe format is documented in the file partman-auto-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository. This also documents how to specify settings such as file
+# system labels, volume group names and which physical devices to include
+# in a volume group.
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+## Partitioning using RAID
+# The method should be set to "raid".
+#d-i partman-auto/method string raid
+# Specify the disks to be partitioned. They will all get the same layout,
+# so this will only work if the disks are the same size.
+#d-i partman-auto/disk string /dev/sda /dev/sdb
+
+# Next you need to specify the physical partitions that will be used. 
+#d-i partman-auto/expert_recipe string \
+#      multiraid ::                                         \
+#              1000 5000 4000 raid                          \
+#                      $primary{ } method{ raid }           \
+#              .                                            \
+#              64 512 300% raid                             \
+#                      method{ raid }                       \
+#              .                                            \
+#              500 10000 1000000000 raid                    \
+#                      method{ raid }                       \
+#              .
+
+# Last you need to specify how the previously defined partitions will be
+# used in the RAID setup. Remember to use the correct partition numbers
+# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
+# devices are separated using "#".
+# Parameters are:
+# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
+#          <devices> <sparedevices>
+
+#d-i partman-auto-raid/recipe string \
+#    1 2 0 ext3 /                    \
+#          /dev/sda1#/dev/sdb1       \
+#    .                               \
+#    1 2 0 swap -                    \
+#          /dev/sda5#/dev/sdb5       \
+#    .                               \
+#    0 2 0 ext3 /home                \
+#          /dev/sda6#/dev/sdb6       \
+#    .
+
+# For additional information see the file partman-auto-raid-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository.
+
+# This makes partman automatically partition without confirmation.
+d-i partman-md/confirm boolean true
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+## Controlling how partitions are mounted
+# The default is to mount by UUID, but you can also choose "traditional" to
+# use traditional device names, or "label" to try filesystem labels before
+# falling back to UUIDs.
+#d-i partman/mount_style select uuid
+
+### Base system installation
+# Configure APT to not install recommended packages by default. Use of this
+# option can result in an incomplete system and should only be used by very
+# experienced users.
+#d-i base-installer/install-recommends boolean false
+
+# The kernel image (meta) package to be installed; "none" can be used if no
+# kernel is to be installed.
+#d-i base-installer/kernel/image string linux-image-2.6-486
+
+### Apt setup
+# You can choose to install non-free and contrib software.
+#d-i apt-setup/non-free boolean true
+#d-i apt-setup/contrib boolean true
+# Uncomment this if you don't want to use a network mirror.
+#d-i apt-setup/use_mirror boolean false
+# Select which update services to use; define the mirrors to be used.
+# Values shown below are the normal defaults.
+#d-i apt-setup/services-select multiselect security, volatile
+#d-i apt-setup/security_host string security.debian.org
+#d-i apt-setup/volatile_host string volatile.debian.org
+
+# Additional repositories, local[0-9] available
+#d-i apt-setup/local0/repository string \
+#       http://local.server/debian stable main
+#d-i apt-setup/local0/comment string local server
+# Enable deb-src lines
+#d-i apt-setup/local0/source boolean true
+# URL to the public key of the local repository; you must provide a key or
+# apt will complain about the unauthenticated repository and so the
+# sources.list line will be left commented out
+#d-i apt-setup/local0/key string http://local.server/key
+
+# By default the installer requires that repositories be authenticated
+# using a known gpg key. This setting can be used to disable that
+# authentication. Warning: Insecure, not recommended.
+#d-i debian-installer/allow_unauthenticated boolean true
+
+# Profile for debian-edu-install versions 1.519 - 1.528 (squeeze)
+d-i debian-edu-install/profile-expert multiselect Main-Server
+
+# Profile for debian-edu-install versions 0.1 - 1.518, 1.529 -> higher (wheezy)
+d-i debian-edu-install/profile multiselect Main-Server
+
+d-i debian-edu-install/confirm boolean true
+
+### Package selection
+#tasksel tasksel/first multiselect standard, web-server
+# If the desktop task is selected, install the kde and xfce desktops
+# instead of the default gnome desktop.
+#tasksel tasksel/desktop multiselect kde, xfce
+#tasksel tasksel/desktop string  kde
+tasksel tasksel/first   multiselect     Debian Edu main server packages, Debian Edu networked minimal packages
+tasksel tasksel/tasks   multiselect
+
+# Individual additional packages to install
+#d-i pkgsel/include string openssh-server build-essential
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+#d-i pkgsel/upgrade select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+#popularity-contest popularity-contest/participate boolean false
+
+### Finishing up the installation
+# During installations from serial console, the regular virtual consoles
+# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
+# line to prevent this.
+#d-i finish-install/keep-consoles boolean true
+
+# Avoid that last message about the install being complete.
+d-i finish-install/reboot_in_progress note
+
+# This will prevent the installer from ejecting the CD during the reboot,
+# which is useful in some situations.
+#d-i cdrom-detect/eject boolean false
+
+# This is how to make the installer shutdown when finished, but not
+# reboot into the installed system.
+#d-i debian-installer/exit/halt boolean true
+# This will power off the machine instead of just halting it.
+d-i debian-installer/exit/poweroff boolean true
+
+### Preseeding other packages
+# Depending on what software you choose to install, or if things go wrong
+# during the installation process, it's possible that other questions may
+# be asked. You can preseed those too, of course. To get a list of every
+# possible question that could be asked during an install, do an
+# installation, and then run these commands:
+#   debconf-get-selections --installer > file
+#   debconf-get-selections >> file
+
+
+#### Advanced options
+### Running custom commands during the installation
+# d-i preseeding is inherently not secure. Nothing in the installer checks
+# for attempts at buffer overflows or other exploits of the values of a
+# preconfiguration file like this one. Only use preconfiguration files from
+# trusted locations! To drive that home, and because it's generally useful,
+# here's a way to run any shell command you'd like inside the installer,
+# automatically.
+
+# This first command is run as early as possible, just after
+# preseeding is read.
+#d-i preseed/early_command string anna-install some-udeb
+# This command is run immediately before the partitioner starts. It may be
+# useful to apply dynamic partitioner preseeding that depends on the state
+# of the disks (which may not be visible when preseed/early_command runs).
+#d-i partman/early_command \
+#       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory. You can chroot to /target and use it
+# directly, or use the apt-install and in-target commands to easily install
+# packages and run commands in the target system.
+#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
+
+#
+# edu specific settings
+#
+
+# the popcon question needs special preseeding as the template
+# being shown is the one in debian-edu-install, which is copied from
+# popularity-contest to ensure all questions show up before packages are
+# downloaded.
+d-i debian-edu-install/participate-popcon boolean false
+
+portmap portmap/loopback boolean false
+
+nslcd nslcd/ldap-base string dc=skole,dc=skolelinux,dc=no
+nslcd nslcd/ldap-uris string DNS
+
+# Workaround (FIXME: bug number needed) bug in dictionary-common for strange question showing up for some languages
+dictionaries-common dictionaries-common/default-wordlist Manual symlinks setting
diff --git a/d-i-preseed-cfgs/debian-edu_wheezy-test_main-server_preseed.cfg b/d-i-preseed-cfgs/debian-edu_wheezy-test_main-server_preseed.cfg
new file mode 100644
index 00000000..a41b8832
--- /dev/null
+++ b/d-i-preseed-cfgs/debian-edu_wheezy-test_main-server_preseed.cfg
@@ -0,0 +1,397 @@
+#### Contents of the preconfiguration file for Debian Edu wheezy-test
+### Localization
+# Preseeding only locale sets language, country and locale.
+d-i debian-installer/locale string en_US
+
+# The values can also be preseeded individually for greater flexibility.
+#d-i debian-installer/language string en
+#d-i debian-installer/country string NL
+#d-i debian-installer/locale string en_GB.UTF-8
+# Optionally specify additional locales to be generated.
+#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8
+
+# Keyboard selection.
+# keymap is an alias for keyboard-configuration/xkb-keymap
+d-i keymap select us
+# d-i keyboard-configuration/toggle select No toggling
+
+### Network configuration
+# Disable network configuration entirely. This is useful for cdrom
+# installations on non-networked devices where the network questions,
+# warning and long timeouts are a nuisance.
+#d-i netcfg/enable boolean false
+
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+
+# To pick a particular interface instead:
+#d-i netcfg/choose_interface select eth0
+
+# To set a different link detection timeout (default is 3 seconds).
+# Values are interpreted as seconds.
+#di netcfg/link_detection_timeout string 10
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+#d-i netcfg/dhcp_timeout string 60
+
+# If you prefer to configure the network manually, uncomment this line and
+# the static network configuration below.
+#d-i netcfg/disable_dhcp boolean true
+
+# If you want the preconfiguration file to work on systems both with and
+# without a dhcp server, uncomment these lines and the static network
+# configuration below.
+#d-i netcfg/dhcp_failed note
+#d-i netcfg/dhcp_options select Configure network manually
+
+# Static network configuration.
+#d-i netcfg/get_nameservers string 192.168.1.1
+#d-i netcfg/get_ipaddress string 192.168.1.42
+#d-i netcfg/get_netmask string 255.255.255.0
+#d-i netcfg/get_gateway string 192.168.1.1
+#d-i netcfg/confirm_static boolean true
+
+# Any hostname and domain names assigned from dhcp take precedence over
+# values set here. However, setting the values still prevents the questions
+# from being shown, even if values come from dhcp.
+d-i netcfg/get_hostname string tjener
+d-i netcfg/get_domain string intern
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+# The wacky dhcp hostname that some ISPs use as a password of sorts.
+#d-i netcfg/dhcp_hostname string radish
+
+# If non-free firmware is needed for the network or other hardware, you can
+# configure the installer to always try to load it, without prompting. Or
+# change to false to disable asking.
+#d-i hw-detect/load_firmware boolean true
+
+### Network console
+# Use the following settings if you wish to make use of the network-console
+# component for remote installation over SSH. This only makes sense if you
+# intend to perform the remainder of the installation manually.
+#d-i anna/choose_modules string network-console
+
+# Enable the Debian Edu installer overrides
+d-i anna/choose_modules     multiselect     debian-edu-install-udeb: Execute Debian-Edu debian-installer profile
+
+#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
+#d-i network-console/password password r00tme
+#d-i network-console/password-again password r00tme
+
+### Mirror settings
+# If you select ftp, the mirror/country string does not need to be set.
+#d-i mirror/protocol string ftp
+d-i mirror/country string manual
+d-i mirror/http/hostname string ftp.de.debian.org
+d-i mirror/http/directory string /debian
+d-i mirror/http/proxy string http://10.0.2.1:3128/
+
+# Suite to install.
+#d-i mirror/suite string testing
+# Suite to use for loading installer components (optional).
+#d-i mirror/udeb/suite string testing
+
+### Account setup
+# Skip creation of a root account (normal user account will be able to
+# use sudo).
+#d-i passwd/root-login boolean false
+# Alternatively, to skip creation of a normal user account.
+#d-i passwd/make-user boolean false
+
+# Root password, either in clear text
+d-i passwd/root-password password r00tme
+d-i passwd/root-password-again password r00tme
+# or encrypted using an MD5 hash.
+#d-i passwd/root-password-crypted password [MD5 hash]
+
+# To create a normal user account.
+d-i passwd/user-fullname string Jenkins Testuser
+d-i passwd/username string jenkins
+# Normal user's password, either in clear text
+d-i passwd/user-password password insecure
+d-i passwd/user-password-again password insecure
+# or encrypted using an MD5 hash.
+#d-i passwd/user-password-crypted password [MD5 hash]
+# Create the first user with the specified UID instead of the default.
+#d-i passwd/user-uid string 1010
+
+# The user account will be added to some standard initial groups. To
+# override that, use this.
+#d-i passwd/user-default-groups string audio cdrom video
+
+### Clock and time zone setup
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string US/Eastern
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+# NTP server to use. The default is almost always fine here.
+#d-i clock-setup/ntp-server string ntp.example.com
+
+### Partitioning
+## Partitioning example
+# If the system has free space you can choose to only partition that space.
+# This is only honoured if partman-auto/method (below) is not set.
+#d-i partman-auto/init_automatically_partition select biggest_free
+
+# Alternatively, you may specify a disk to partition. If the system has only
+# one disk the installer will default to using that, but otherwise the device
+# name must be given in traditional, non-devfs format (so e.g. /dev/hda or
+# /dev/sda, and not e.g. /dev/discs/disc0/disc).
+# For example, to use the first SCSI/SATA hard disk:
+#d-i partman-auto/disk string /dev/sda
+# In addition, you'll need to specify the method to use.
+# The presently available methods are:
+# - regular: use the usual partition types for your architecture
+# - lvm:     use LVM to partition the disk
+# - crypto:  use LVM within an encrypted partition
+d-i partman-auto/method string lvm
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+# The same applies to pre-existing software RAID array:
+d-i partman-md/device_remove_md boolean true
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+
+# You can choose one of the three predefined partitioning recipes:
+# - atomic: all files in one partition
+# - home:   separate /home partition
+# - multi:  separate /home, /usr, /var, and /tmp partitions
+d-i partman-auto/choose_recipe select atomic
+
+# Or provide a recipe of your own...
+# If you have a way to get a recipe file into the d-i environment, you can
+# just point at it.
+#d-i partman-auto/expert_recipe_file string /hd-media/recipe
+
+# If not, you can put an entire recipe into the preconfiguration file in one
+# (logical) line. This example creates a small /boot partition, suitable
+# swap, and uses the rest of the space for the root partition:
+#d-i partman-auto/expert_recipe string                         \
+#      boot-root ::                                            \
+#              40 50 100 ext3                                  \
+#                      $primary{ } $bootable{ }                \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ /boot }                     \
+#              .                                               \
+#              500 10000 1000000000 ext3                       \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ / }                         \
+#              .                                               \
+#              64 512 300% linux-swap                          \
+#                      method{ swap } format{ }                \
+#              .
+
+# The full recipe format is documented in the file partman-auto-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository. This also documents how to specify settings such as file
+# system labels, volume group names and which physical devices to include
+# in a volume group.
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+## Partitioning using RAID
+# The method should be set to "raid".
+#d-i partman-auto/method string raid
+# Specify the disks to be partitioned. They will all get the same layout,
+# so this will only work if the disks are the same size.
+#d-i partman-auto/disk string /dev/sda /dev/sdb
+
+# Next you need to specify the physical partitions that will be used. 
+#d-i partman-auto/expert_recipe string \
+#      multiraid ::                                         \
+#              1000 5000 4000 raid                          \
+#                      $primary{ } method{ raid }           \
+#              .                                            \
+#              64 512 300% raid                             \
+#                      method{ raid }                       \
+#              .                                            \
+#              500 10000 1000000000 raid                    \
+#                      method{ raid }                       \
+#              .
+
+# Last you need to specify how the previously defined partitions will be
+# used in the RAID setup. Remember to use the correct partition numbers
+# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
+# devices are separated using "#".
+# Parameters are:
+# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
+#          <devices> <sparedevices>
+
+#d-i partman-auto-raid/recipe string \
+#    1 2 0 ext3 /                    \
+#          /dev/sda1#/dev/sdb1       \
+#    .                               \
+#    1 2 0 swap -                    \
+#          /dev/sda5#/dev/sdb5       \
+#    .                               \
+#    0 2 0 ext3 /home                \
+#          /dev/sda6#/dev/sdb6       \
+#    .
+
+# For additional information see the file partman-auto-raid-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository.
+
+# This makes partman automatically partition without confirmation.
+d-i partman-md/confirm boolean true
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+## Controlling how partitions are mounted
+# The default is to mount by UUID, but you can also choose "traditional" to
+# use traditional device names, or "label" to try filesystem labels before
+# falling back to UUIDs.
+#d-i partman/mount_style select uuid
+
+### Base system installation
+# Configure APT to not install recommended packages by default. Use of this
+# option can result in an incomplete system and should only be used by very
+# experienced users.
+#d-i base-installer/install-recommends boolean false
+
+# The kernel image (meta) package to be installed; "none" can be used if no
+# kernel is to be installed.
+#d-i base-installer/kernel/image string linux-image-2.6-486
+
+### Apt setup
+# You can choose to install non-free and contrib software.
+#d-i apt-setup/non-free boolean true
+#d-i apt-setup/contrib boolean true
+# Uncomment this if you don't want to use a network mirror.
+#d-i apt-setup/use_mirror boolean false
+# Select which update services to use; define the mirrors to be used.
+# Values shown below are the normal defaults.
+#d-i apt-setup/services-select multiselect security, volatile
+#d-i apt-setup/security_host string security.debian.org
+#d-i apt-setup/volatile_host string volatile.debian.org
+
+# Additional repositories, local[0-9] available
+#d-i apt-setup/local0/repository string \
+#       http://local.server/debian stable main
+#d-i apt-setup/local0/comment string local server
+# Enable deb-src lines
+#d-i apt-setup/local0/source boolean true
+# URL to the public key of the local repository; you must provide a key or
+# apt will complain about the unauthenticated repository and so the
+# sources.list line will be left commented out
+#d-i apt-setup/local0/key string http://local.server/key
+
+# By default the installer requires that repositories be authenticated
+# using a known gpg key. This setting can be used to disable that
+# authentication. Warning: Insecure, not recommended.
+#d-i debian-installer/allow_unauthenticated boolean true
+
+# Profile for debian-edu-install versions 0.1 - 1.518, 1.529 -> higher (wheezy)
+d-i debian-edu-install/profile multiselect Main-Server
+
+d-i debian-edu-install/confirm boolean true
+
+### Package selection
+#tasksel tasksel/first multiselect standard, web-server
+# If the desktop task is selected, install the kde and xfce desktops
+# instead of the default gnome desktop.
+#tasksel tasksel/desktop multiselect kde, xfce
+
+# Individual additional packages to install
+#d-i pkgsel/include string openssh-server build-essential
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+#d-i pkgsel/upgrade select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+#popularity-contest popularity-contest/participate boolean false
+
+### Finishing up the installation
+# During installations from serial console, the regular virtual consoles
+# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
+# line to prevent this.
+#d-i finish-install/keep-consoles boolean true
+
+# Avoid that last message about the install being complete.
+d-i finish-install/reboot_in_progress note
+
+# This will prevent the installer from ejecting the CD during the reboot,
+# which is useful in some situations.
+#d-i cdrom-detect/eject boolean false
+
+# This is how to make the installer shutdown when finished, but not
+# reboot into the installed system.
+#d-i debian-installer/exit/halt boolean true
+# This will power off the machine instead of just halting it.
+d-i debian-installer/exit/poweroff boolean true
+
+### Preseeding other packages
+# Depending on what software you choose to install, or if things go wrong
+# during the installation process, it's possible that other questions may
+# be asked. You can preseed those too, of course. To get a list of every
+# possible question that could be asked during an install, do an
+# installation, and then run these commands:
+#   debconf-get-selections --installer > file
+#   debconf-get-selections >> file
+
+
+#### Advanced options
+### Running custom commands during the installation
+# d-i preseeding is inherently not secure. Nothing in the installer checks
+# for attempts at buffer overflows or other exploits of the values of a
+# preconfiguration file like this one. Only use preconfiguration files from
+# trusted locations! To drive that home, and because it's generally useful,
+# here's a way to run any shell command you'd like inside the installer,
+# automatically.
+
+# This first command is run as early as possible, just after
+# preseeding is read.
+#d-i preseed/early_command string anna-install some-udeb
+# This command is run immediately before the partitioner starts. It may be
+# useful to apply dynamic partitioner preseeding that depends on the state
+# of the disks (which may not be visible when preseed/early_command runs).
+#d-i partman/early_command \
+#       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory. You can chroot to /target and use it
+# directly, or use the apt-install and in-target commands to easily install
+# packages and run commands in the target system.
+#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
+
+#
+# edu specific settings
+#
+
+# the popcon question needs special preseeding as the template
+# being shown is the one in debian-edu-install, which is copied from
+# popularity-contest to ensure all questions show up before packages are
+# downloaded.
+d-i debian-edu-install/participate-popcon boolean false
+
+portmap portmap/loopback boolean false
+
+nslcd nslcd/ldap-base string dc=skole,dc=skolelinux,dc=no
+nslcd nslcd/ldap-uris string DNS
+
+# Workaround (FIXME: bug number needed) bug in dictionary-common for strange question showing up for some languages
+dictionaries-common dictionaries-common/default-wordlist Manual symlinks setting
diff --git a/job-cfg/g-i-installation.yaml b/job-cfg/g-i-installation.yaml
index 924e99d0..3fa783bf 100644
--- a/job-cfg/g-i-installation.yaml
+++ b/job-cfg/g-i-installation.yaml
@@ -93,6 +93,10 @@
     defaults: g-i-installation
     name: '{name}_debian-edu_wheezy-test_combi-server'
 
+- job-template:
+    defaults: g-i-installation
+    name: '{name}_debian-edu_wheezy-test_main-server'
+
 #- job-template:
 #    defaults: g-i-installation
 #    name: '{name}_debian-edu_wheezy-test_sugar'
@@ -115,6 +119,10 @@
 
 - job-template:
     defaults: g-i-installation
+    name: '{name}_debian-edu_squeeze-test_main-server'
+
+- job-template:
+    defaults: g-i-installation
     name: '{name}_debian_wheezy_xfce'
 
 - job-template:
@@ -158,7 +166,7 @@
          my_title: 'Debian Edu (wheezy-test) minimal'
          my_shell: '/srv/jenkins/bin/g-i-installation.sh 1 debian-edu_wheezy-test_minimal 25 http://ftp.skolelinux.org/cd-wheezy-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
          my_description: 'Do a fully automated installation of a Debian Edu Wheezy minimal profile - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian-edu_wheezy-test_minimal_preseed.cfg">this preseed.cfg</a>) using the netinst CD image.'
-         my_timed: '42 20 * * 1,3,5,7'
+         my_timed: '23 20 * * 1,3,5,7'
          my_recipients: 'jenkins+debian-edu holger@layer-acht.org'
       - '{name}_debian-edu_wheezy-test_standalone':
          my_title: 'Debian Edu (wheezy-test) standalone'
@@ -178,6 +186,12 @@
          my_description: 'Do a fully automated installation of a Debian Edu Wheezy combi-server profile - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian-edu_wheezy-test_combi-server_preseed.cfg">this preseed.cfg</a>) using the netinst CD image.'
          my_timed: '42 0 * * 1,3,5,7'
          my_recipients: 'jenkins+debian-edu holger@layer-acht.org'
+      - '{name}_debian-edu_wheezy-test_main-server':
+         my_title: 'Debian Edu (wheezy-test) main-server'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 5 debian-edu_wheezy-test_main-server 30 http://ftp.skolelinux.org/cd-wheezy-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
+         my_description: 'Do a fully automated installation of a Debian Edu Wheezy main-server profile - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian-edu_wheezy-test_main-server_preseed.cfg">this preseed.cfg</a>) using the netinst CD image.'
+         my_timed: '42 2 * * 1,3,5,7'
+         my_recipients: 'jenkins+debian-edu holger@layer-acht.org'
 #      - '{name}_debian-edu_wheezy-test_sugar':
 #         my_title: 'Debian Edu (wheezy-test) sugar'
 #         my_shell: '/srv/jenkins/bin/g-i-installation.sh 99 debian-edu_wheezy-test_sugar 25 http://ftp.skolelinux.org/cd-wheezy-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
@@ -186,79 +200,85 @@
 #         my_recipients: 'jenkins+debian-edu holger@layer-acht.org'
       - '{name}_debian-edu_squeeze-test_minimal':
          my_title: 'Debian Edu (squeeze-test) minimal'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 5 debian-edu_squeeze-test_minimal 20 http://ftp.skolelinux.org/cd-squeeze-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 6 debian-edu_squeeze-test_minimal 20 http://ftp.skolelinux.org/cd-squeeze-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
          my_description: 'Do a fully automated installation of a Debian Edu Squeeze (suite: squeeze-test) minimal profile - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian-edu_squeeze-test_minimal_preseed.cfg">this preseed.cfg</a>) using the netinst CD image.'
-         my_timed: '42 12 1,15 * *'
+         my_timed: '42 4 1,15 * *'
          my_recipients: 'jenkins+debian-edu holger@layer-acht.org'
       - '{name}_debian-edu_squeeze-test_standalone':
          my_title: 'Debian Edu (squeeze-test) standalone'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 6 debian-edu_squeeze-test_standalone 20 http://ftp.skolelinux.org/cd-squeeze-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 7 debian-edu_squeeze-test_standalone 20 http://ftp.skolelinux.org/cd-squeeze-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
          my_description: 'Do a fully automated installation of a Debian Edu Squeeze (suite: squeeze-test) standalone profile - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian-edu_squeeze-test_standalone_preseed.cfg">this preseed.cfg</a>) using the netinst CD image.'
-         my_timed: '42 12 1,15 * *'
+         my_timed: '42 4 1,15 * *'
          my_recipients: 'jenkins+debian-edu holger@layer-acht.org'
       - '{name}_debian-edu_squeeze-test_workstation':
          my_title: 'Debian Edu (squeeze-test) workstation'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 7 debian-edu_squeeze-test_workstation 30 http://ftp.skolelinux.org/cd-squeeze-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 8 debian-edu_squeeze-test_workstation 30 http://ftp.skolelinux.org/cd-squeeze-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
          my_description: 'Do a fully automated installation of a Debian Edu Squeeze (suite: squeeze-test) workstation profile - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian-edu_squeeze-test_workstation_preseed.cfg">this preseed.cfg</a>) using the netinst CD image.'
-         my_timed: '42 14 1,15 * *'
+         my_timed: '42 7 1,15 * *'
          my_recipients: 'jenkins+debian-edu holger@layer-acht.org'
       - '{name}_debian-edu_squeeze-test_combi-server':
          my_title: 'Debian Edu (squeeze-test) combi-server'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 8 debian-edu_squeeze-test_combi-server 30 http://ftp.skolelinux.org/cd-squeeze-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 9 debian-edu_squeeze-test_combi-server 30 http://ftp.skolelinux.org/cd-squeeze-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
          my_description: 'Do a fully automated installation of a Debian Edu Squeeze (suite: squeeze-test) combi-server profile - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian-edu_squeeze-test_combi-server_preseed.cfg">this preseed.cfg</a>) using the netinst CD image.'
-         my_timed: '42 10 1,15 * *'
+         my_timed: '42 8 1,15 * *'
+         my_recipients: 'jenkins+debian-edu holger@layer-acht.org'
+      - '{name}_debian-edu_squeeze-test_main-server':
+         my_title: 'Debian Edu (squeeze-test) main-server'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 10 debian-edu_squeeze-test_main-server 30 http://ftp.skolelinux.org/cd-squeeze-test-amd64-i386-netinst/debian-edu-amd64-i386-NETINST-1.iso'
+         my_description: 'Do a fully automated installation of a Debian Edu Squeeze (suite: squeeze-test) main-server profile - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian-edu_squeeze-test_main-server_preseed.cfg">this preseed.cfg</a>) using the netinst CD image.'
+         my_timed: '42 16 1,15 * *'
          my_recipients: 'jenkins+debian-edu holger@layer-acht.org'
       - '{name}_debian_wheezy_kde':
          my_title: 'Debian (wheezy) KDE desktop install'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 9 debian_wheezy_kde 10 http://d-i.debian.org/daily-images/amd64/daily/netboot/gtk/debian-installer/amd64/'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 11 debian_wheezy_kde 10 http://d-i.debian.org/daily-images/amd64/daily/netboot/gtk/debian-installer/amd64/'
          my_description: 'Do a fully automated installation of Debian KDE desktop - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian_wheezy_kde_preseed.cfg">this preseed.cfg</a>) using netboot gtk.'
          my_timed: '42 15 2,9,16,23 * *'
          my_recipients: 'holger@layer-acht.org'  # FIXME readd jenkins+debian-boot here and for other jobs - once we made this more stable
       - '{name}_debian_wheezy_xfce':
          my_title: 'Debian (wheezy) XFCE desktop install'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 10 debian_wheezy_xfce 10 http://d-i.debian.org/daily-images/amd64/daily/netboot/gtk/debian-installer/amd64/'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 12 debian_wheezy_xfce 10 http://d-i.debian.org/daily-images/amd64/daily/netboot/gtk/debian-installer/amd64/'
          my_description: 'Do a fully automated installation of Debian XFCE desktop - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian_wheezy_xfce_preseed.cfg">this preseed.cfg</a>) using netboot gtk.'
-         my_timed: '42 17 2,9,16,23 * *'
+         my_timed: '42 16 2,9,16,23 * *'
          my_recipients: 'holger@layer-acht.org'
       - '{name}_debian_wheezy_lxde':
          my_title: 'Debian (wheezy) LXDE desktop install'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 11 debian_wheezy_lxde 10 http://d-i.debian.org/daily-images/amd64/daily/netboot/gtk/debian-installer/amd64/'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 13 debian_wheezy_lxde 10 http://d-i.debian.org/daily-images/amd64/daily/netboot/gtk/debian-installer/amd64/'
          my_description: 'Do a fully automated installation of Debian LXDE desktop - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian_wheezy_lxde_preseed.cfg">this preseed.cfg</a>) using netboot gtk.'
          my_timed: '42 19 2,9,16,23 * *'
          my_recipients: 'holger@layer-acht.org'
       - '{name}_debian_wheezy_gnome':
          my_title: 'Debian (wheezy) GNOME desktop install'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 12 debian_wheezy_gnome 10 http://d-i.debian.org/daily-images/amd64/daily/netboot/gtk/debian-installer/amd64/'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 14 debian_wheezy_gnome 10 http://d-i.debian.org/daily-images/amd64/daily/netboot/gtk/debian-installer/amd64/'
          my_description: 'Do a fully automated installation of Debian GNOME desktop - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian_wheezy_gnome_preseed.cfg">this preseed.cfg</a>) using netboot gtk.'
          my_timed: '42 19 2,9,16,23 * *'
          my_recipients: 'holger@layer-acht.org'
       - '{name}_debian_squeeze_xfce':
          my_title: 'Debian (squeeze) XFCE desktop install'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 13 debian_squeeze_xfce 10 http://ftp.de.debian.org/debian/dists/squeeze/main/installer-amd64/current/images/netboot/gtk/debian-installer/amd64/'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 15 debian_squeeze_xfce 10 http://ftp.de.debian.org/debian/dists/squeeze/main/installer-amd64/current/images/netboot/gtk/debian-installer/amd64/'
          my_description: 'Do a fully automated installation of Debian XFCE desktop - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian_squeeze_xfce_preseed.cfg">this preseed.cfg</a>) using netboot gtk.'
          my_timed: '# debian squeeze jobs are only build on request. squeeze is stable.'
          my_recipients: 'holger@layer-acht.org'
       - '{name}_debian_sid_daily_xfce':
          my_title: 'Debian (sid daily build CD) XFCE desktop install'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 14 debian_sid_daily_xfce 10 http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 16 debian_sid_daily_xfce 10 http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso'
          my_description: 'Do a fully automated installation of Debian XFCE desktop - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian_sid_daily_xfce_preseed.cfg">this preseed.cfg</a>) using netboot gtk.'
          my_timed: '42 8 * * *'
          my_recipients: 'holger@layer-acht.org'
       - '{name}_debian_sid_daily_lxde':
          my_title: 'Debian (sid daily build CD) LXDE desktop install'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 15 debian_sid_daily_lxde 10 http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 17 debian_sid_daily_lxde 10 http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso'
          my_description: 'Do a fully automated installation of Debian LXDE desktop - via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian_sid_daily_lxde_preseed.cfg">this preseed.cfg</a>) using netboot gtk.'
          my_timed: '42 10 * * *'
          my_recipients: 'holger@layer-acht.org'
       - '{name}_debian_sid_daily_rescue':
          my_title: 'Debian (sid daily build CD) rescue mode'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 16 debian_sid_daily_rescue 1 http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 18 debian_sid_daily_rescue 1 http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso'
          my_description: 'Just go into rescue mode (coming in more languages soon) via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian_sid_daily_rescue_preseed.cfg">this preseed.cfg</a>) using netboot gtk.'
          my_timed: '42 6 * * *'
          my_recipients: 'holger@layer-acht.org'
       - '{name}_debian_sid_daily_rescue_dark_theme':
          my_title: 'Debian (sid daily build CD) rescue mode, using theme=dark'
-         my_shell: '/srv/jenkins/bin/g-i-installation.sh 17 debian_sid_daily_rescue_dark_theme 1 http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso'
+         my_shell: '/srv/jenkins/bin/g-i-installation.sh 19 debian_sid_daily_rescue_dark_theme 1 http://cdimage.debian.org/cdimage/daily-builds/sid_d-i/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso'
          my_description: 'Just go into rescue mode (coming in more languages soon), using theme=dark, via d-i preseeding (with <a href="http://jenkins.debian.net/d-i-preseed-cfgs/debian_sid_daily_rescue_dark_theme_preseed.cfg">this preseed.cfg</a>) using netboot gtk.'
          my_timed: '42 6 * * 7'
          my_recipients: 'holger@layer-acht.org'