From 94b1e165e12ff12e2caf01913fdec52009215210 Mon Sep 17 00:00:00 2001 From: elij Date: Sun, 27 Sep 2009 16:43:33 -0700 Subject: removed tupkg. community management moved to main repos. Signed-off-by: Loui Chang --- tupkg/README.txt | 99 ------- tupkg/client/communitypkg | 132 --------- tupkg/client/tupkg | 216 --------------- tupkg/scripts/run-tupkgs | 4 - tupkg/scripts/run-tupkgupdate | 19 -- tupkg/scripts/stop-tupkgs | 3 - tupkg/server/tupkgs | 329 ---------------------- tupkg/server/tupkgs.conf | 10 - tupkg/update/tupkgupdate | 622 ------------------------------------------ tupkg/update/tupkgupdate-lite | 513 ---------------------------------- tupkg/update/tupkgupdate64 | 579 --------------------------------------- 11 files changed, 2526 deletions(-) delete mode 100644 tupkg/README.txt delete mode 100644 tupkg/client/communitypkg delete mode 100755 tupkg/client/tupkg delete mode 100755 tupkg/scripts/run-tupkgs delete mode 100755 tupkg/scripts/run-tupkgupdate delete mode 100755 tupkg/scripts/stop-tupkgs delete mode 100755 tupkg/server/tupkgs delete mode 100644 tupkg/server/tupkgs.conf delete mode 100755 tupkg/update/tupkgupdate delete mode 100755 tupkg/update/tupkgupdate-lite delete mode 100755 tupkg/update/tupkgupdate64 (limited to 'tupkg') diff --git a/tupkg/README.txt b/tupkg/README.txt deleted file mode 100644 index 47facc4..0000000 --- a/tupkg/README.txt +++ /dev/null @@ -1,99 +0,0 @@ -TU Packaging Tools (tupkg) --------------------------- -- client side (python for proof of concept, later re-write to C?) - The main purpose of this tool is to upload the compiled - pkg.tar.gz to the server. It can (should?) do some verification - on the package prior to uploading to the server. It will have - a config file to store run-time information such as username - (email), password, and server name. - -- server side (python for proof of concept, later re-write to C?) - The server side will handle incoming connections from its client - side counterpart. The server should bind to port 80 (maybe a - vhost such as tupkg.archlinux.org?) so that firewalls won't be - an issue. The server verifies the client authentication data, - and then accepts the package(s). If port 80 is not available, - perhaps 443, or are there other 'standard' ports that usually - do not get filtered? - - I think the server should be multithreaded to handle simultaneous - uploads rather than queue up requests. The download should be - stored in a temp directory based on the username to prevent - directory, filename clashes. - - Once the package(s) is uploaded, the server can either kick off - a gensync, or we can write a separate script to call gensync once - or twice a day. My preference would be a separate script to call - gensync (like the *NIX philosophy of one tool per task). - -- protocol (c: => client, s: => server) - Whenever the client/server exchange a message, it is always - preceeded by two-bytes representing the following message's - length. For example, when the client connects, it will send: - - 0x0028username=bfinch@example.net&password=B0b - - 0x0028 is the 40 byte strlen of the message in two-bytes. The - client and server always read two-bytes from the socket, and - then know how much data is coming and can read that amount of - bytes from the socket. - - ==> authentication - c: username=emailaddy&password=mypassword - s: result=PASS|FAIL - - NOTE: We can add encryption easily enough with the python - version using the socket.ssl method. - - ==> uploading package data - if PASS: - - c: numpkgs=2&name1=p1.pkg.tar.gz&size1=123&md5sum1=abcd\ - name2=p2.pkg.tar.gz&size2=3&md5sum2=def1 - s: numpkgs=2&name1=p1.pkg.tar.gz&size1=119&\ - name2=p2.pkg.tar.gz&size2=0 (*) - - (*) NOTE: The server will reply back to the client how many - packages it has already received and its local file size. - This way, the client can resume an upload. In the example - above, the server still needs the last four (123-119) bytes - for the first package, and that it has no part of the - second package. The client would then begin sending the - last four bytes from the first package (p1.pkg.tar.gz) and - then follow it with the full second package (p2.pkg.tar.gz). - The data would be sent as a continuous chunk of data. The - server will then need to track which bytes belong to which - package. - - else FAIL: - c: -spits out error message on stderr to user- - - - ==> after upload completes - The server should verify the integrity of the uploaded packages - by doing an md5sum on each and sending the info back to the client - for comparison. After sending the message, the server waits for - the 'ack' message from the client and then closes the connection. - - s: np=2&m1=PASS&m2=FAIL - c: ack - - The client replies with the 'ack' and then closes its connection - to the server. It then reports the PASS/FAIL status of each - package's upload attempt. - - NOTE: If the upload fails (client connection dies), the server - keeps any data it has received in order to support resuming an - upload. However, if the client uploads all data, and the server - successully reads all data and the final MD5 fails, the server - deletes the failed package. - - -Terms/definitions: -====================== -TU - No change (trusted by the community, if anyone asks what trust - means) -TUR - renamed to Arch User-community Repo (AUR) (so we can use -u for - versions) -Incoming - renamed to "Unsupported" - diff --git a/tupkg/client/communitypkg b/tupkg/client/communitypkg deleted file mode 100644 index 8579273..0000000 --- a/tupkg/client/communitypkg +++ /dev/null @@ -1,132 +0,0 @@ -#!/bin/bash - -# Source makepkg.conf; fail if it is not found -if [ -r "/etc/makepkg.conf" ]; then - source "/etc/makepkg.conf" -else - echo "/etc/makepkg.conf not found!" - exit 1 -fi - -# Source user-specific makepkg.conf overrides -if [ -r ~/.makepkg.conf ]; then - source ~/.makepkg.conf -fi - -cmd=`basename $0` - -if [ ! -f PKGBUILD ]; then - echo "No PKGBUILD file" - exit 1 -fi - -# define tags and staging areas based on architecture -if [ "$CARCH" = "i686" ]; then - currenttag='CURRENT' - testingtag='TESTING' - suffix='' -elif [ "$CARCH" = "x86_64" ]; then - currenttag='CURRENT-64' - testingtag='TESTING-64' - suffix='64' -else - echo "CARCH must be set to a recognized value!" - exit 1 -fi - -source PKGBUILD -pkgfile=${pkgname}-${pkgver}-${pkgrel}-${CARCH}.pkg.tar.gz -oldstylepkgfile=${pkgname}-${pkgver}-${pkgrel}.pkg.tar.gz - -if [ ! -f $pkgfile ]; then - if [ -f $PKGDEST/$pkgfile ]; then - pkgfile=$PKGDEST/$pkgfile - oldstylepkgfile=$PKGDEST/$oldstylepkgfile - elif [ -f $oldstylepkgfile ]; then - pkgfile=$oldstylepkgfile - elif [ -f $PKGDEST/$oldstylepkgfile ]; then - pkgfile=$PKGDEST/$oldstylepkgfile - else - echo "File $pkgfile doesn't exist" - exit 1 - fi -fi - -if [ "$cmd" == "extrapkg" ]; then - repo="extra" - tag="$currenttag" -elif [ "$cmd" == "corepkg" ]; then - repo="core" - tag="$currenttag" -elif [ "$cmd" == "testingpkg" ]; then - repo="testing" - tag="$testingtag" -elif [ "$cmd" == "unstablepkg" ]; then - repo="unstable" - tag="$currenttag" -elif [ "$cmd" == "communitypkg" ]; then - repo="community" - tag="$currenttag" -fi - -# see if any limit options were passed, we'll send them to SCP -unset scpopts -if [ "$1" = "-l" ]; then - scpopts="$1 $2" - shift 2 -fi - -if [ "$repo" != "community" ]; then - # combine what we know into a variable (suffix defined based on $CARCH) - uploadto="staging/${repo}${suffix}/add/$(basename ${pkgfile})" - scp ${scpopts} "${pkgfile}" "archlinux.org:${uploadto}" - if [ "$(md5sum "${pkgfile}" | cut -d' ' -f1)" != "$(ssh archlinux.org md5sum "${uploadto}" | cut -d' ' -f1)" ]; then - echo "File got corrupted during upload, cancelled." - exit 1 - else - echo "File integrity okay." - fi -else - if [ ! -f ~/.tupkg ]; then - echo "Must configure tupkg via ~/.tupkg, cancelled" - exit 1 - fi - if [ "$(basename $pkgfile)" != "$(basename $oldstylepkgfile)" ]; then - echo "Renaming makepkg3 package for compatability" - mv $pkgfile $oldstylepkgfile - pkgfile=$oldstylepkgfile - fi - tupkg $pkgfile -fi -if [ $? -ne 0 ]; then - echo "Cancelled" - exit 1 -fi -echo "===> Uploaded $pkgfile" - -if [ "$1" != "" ]; then - cvs commit -m "upgpkg: $pkgname $pkgver-$pkgrel - $1" > /dev/null - if [ $? -ne 0 ]; then - echo "Cancelled" - exit 1 - fi - echo "===> Commited with \"upgpkg: $pkgname $pkgver-$pkgrel - $1\" message" -else - cvs commit -m "upgpkg: $pkgname $pkgver-$pkgrel" > /dev/null - if [ $? -ne 0 ]; then - echo "Cancelled" - exit 1 - fi - echo "===> Commited with \"upgpkg: $pkgname $pkgver-$pkgrel\" message" -fi - -cvs tag -c -F -R $tag > /dev/null -if [ $? -ne 0 ]; then - echo "Cancelled" - exit 1 -fi -echo "===> Tagged as $tag" - -# vim:ft=sh:ts=4:sw=4:et: diff --git a/tupkg/client/tupkg b/tupkg/client/tupkg deleted file mode 100755 index af7d054..0000000 --- a/tupkg/client/tupkg +++ /dev/null @@ -1,216 +0,0 @@ -#!/usr/bin/python -O -# -# Description: -# ------------ -# This is the client-side portion of the Trusted User package -# manager. The TUs will use this program to upload packages into -# the AUR. For more information, see the ../README.txt file. -# -# Python Indentation: -# ------------------- -# For a vim: line to be effective, it must be at the end of the -# file. See the end of the file for more information. -# - -import sys -import socket -import os -import struct -import os.path -import cgi -import urllib -import getopt -import ConfigParser - -from hashlib import md5 - -class ClientFile: - def __init__(self, pathname): - self.pathname = pathname - self.filename = os.path.basename(pathname) - self.fd = open(pathname, "rb") - self.fd.seek(0, 2) - self.size = self.fd.tell() - self.fd.seek(0) - self.makeMd5() - - def makeMd5(self): - md5sum = md5() - while self.fd.tell() != self.size: - md5sum.update(self.fd.read(1024)) - self.md5 = md5sum.hexdigest() - -class ClientSocket: - def __init__(self, files, host, port, username, password): - self.files = files - self.host = host - self.port = port - self.socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM) - self.username = username - self.password = password - - def connect(self): - self.socket.connect((self.host, self.port)) - - def reliableRead(self, size): - totalread = "" - while len(totalread) < size: - read = self.socket.recv(size-len(totalread)) - if read == 0: - raise RuntimeError, "socket connection broken" - totalread += read - return totalread - - def sendMsg(self, msg): - if type(msg) == dict: - msg = urllib.urlencode(msg,1) - length = struct.pack("H", socket.htons(len(msg))) - self.socket.sendall(length) - self.socket.sendall(msg) - - def readMsg(self, format=0): - initsize = self.reliableRead(2) - (length,) = struct.unpack("H", initsize) - length = socket.ntohs(length) - data = self.reliableRead(length) - if format == 1: - qs = cgi.parse_qs(data) - return qs - else: - return data - - def close(self): - self.socket.close() - - def auth(self): - msg = {'username': self.username, 'password': self.password} - self.sendMsg(msg) - reply = self.readMsg(1) - if reply['result'] == ["PASS"]: - return 1 - elif reply['result'] == ["SQLERR"]: - print "SQL server-side error" - return 0 - else: - return 0 - - def sendFileMeta(self): - msg = {'numpkgs': len(self.files)} - for i, v in enumerate(self.files): - msg['name'+str(i)] = v.filename - msg['size'+str(i)] = v.size - msg['md5sum'+str(i)] = v.md5 - self.sendMsg(msg) - reply = self.readMsg(1) - print reply - for i in reply: - if i[:4] == 'size': - self.files[int(i[4:])].cur_done = int(reply[i][0]) - - def sendFiles(self): - for i in self.files: - i.fd.seek(i.cur_done) - print "Uploading:", i.filename, str(i.size/1024), "kb" - sdone = 0 - while i.fd.tell() < i.size: - sdone+=1 - self.socket.sendall(i.fd.read(1024)) - if sdone % 100 == 0: - print "\r", - print str(sdone), "of", str(i.size/1024), "kb", - sys.stdout.flush() - reply = self.readMsg(1) - print reply - self.sendMsg("ack") - -def usage(): - print "usage: tupkg [options] " - print "options:" - print " -u, --user Connect with username" - print " -P, --password Connect with password" - print " -h, --host Connect to host" - print " -p, --port Connect to host on port (default 1034)" - print "May also use conf file: ~/.tupkg" - -def main(argv=None): - if argv is None: - argv = sys.argv - - confdict = {} - conffile = os.path.join(os.getenv("HOME"),".tupkg") #try the standard location - #Set variables from file now, may be overridden on command line - if os.path.isfile(conffile): - config = ConfigParser.ConfigParser() - config.read(conffile) - confdict['user'] = config.get('tupkg','username') - confdict['password'] = config.get('tupkg','password') - try: - confdict['host'] = config.get('tupkg','host') - except: - confdict['host'] = 'aur.archlinux.org' - try: - confdict['port'] = config.getint('tupkg','port') - except: - confdict['port'] = 1034 - else: - confdict['user'] = "" - confdict['password'] = "" - confdict['host'] = 'aur.archlinux.org' - confdict['port'] = 1034 - if len(argv) == 1: #no config file and no args, bail - usage() - return 1 - - try: - optlist, args = getopt.getopt(argv[1:], "u:P:h:p:", ["user=", "password=", "host=", "port="]) - except getopt.GetoptError: - usage() - return 1 - - for i, k in optlist: - if i in ('-u', '--user'): - confdict['user'] = k - if i in ('-P', '--password'): - confdict['password'] = k - if i in ('-h', '--host'): - confdict['host'] = k - if i in ('-p', '--port'): - confdict['port'] = int(k) - - files = [] - for i in args: - try: - files.append(ClientFile(i)) - except IOError, err: - print "Error: " + err.strerror + ": '" + err.filename + "'" - usage() - return 1 - - cs = ClientSocket(files, confdict['host'], confdict['port'], confdict['user'], confdict['password']) - try: - cs.connect() - - if not cs.auth(): - print "Error authenticating you, you bastard" - return 1 - - cs.sendFileMeta() - - cs.sendFiles() - - cs.close() - except KeyboardInterrupt: - print "Cancelling" - cs.close() - - return 0 - -if __name__ == "__main__": - sys.exit(main()) - -# Python Indentation: -# ------------------- -# Use tabs not spaces. If you use vim, the following comment will -# configure it to use tabs. -# -# vim:noet:ts=2 sw=2 ft=python diff --git a/tupkg/scripts/run-tupkgs b/tupkg/scripts/run-tupkgs deleted file mode 100755 index 429f815..0000000 --- a/tupkg/scripts/run-tupkgs +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/bash -aurroot=/srv/http/aur - -nohup $aurroot/aur/tupkg/server/tupkgs -c $aurroot/tupkgs.conf > $aurroot/tupkgs.log 2>&1 & diff --git a/tupkg/scripts/run-tupkgupdate b/tupkg/scripts/run-tupkgupdate deleted file mode 100755 index 955144a..0000000 --- a/tupkg/scripts/run-tupkgupdate +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/bash - -aurroot=/srv/http/aur - -# Set HOME for correct cvs auth. -HOME=$aurroot - -echo "--------------------" -date - -# Update the CVS tree. -# Filter out useless output. -cd $aurroot/cvs -echo "Updating CVS..." -cvs update -dP 2>&1 | grep -v "Updating" - -# tupkgupdate -$aurroot/aur/tupkg/update/tupkgupdate -c $aurroot/tupkgs.conf --delete --paranoid /srv/ftp/community/os/i686 $aurroot/cvs $aurroot/packages/full - diff --git a/tupkg/scripts/stop-tupkgs b/tupkg/scripts/stop-tupkgs deleted file mode 100755 index b0e4c02..0000000 --- a/tupkg/scripts/stop-tupkgs +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/bash - -killall tupkgs diff --git a/tupkg/server/tupkgs b/tupkg/server/tupkgs deleted file mode 100755 index dab4e58..0000000 --- a/tupkg/server/tupkgs +++ /dev/null @@ -1,329 +0,0 @@ -#!/usr/bin/python -O -# -# Description: -# ------------ -# This is the server-side portion of the Trusted User package -# manager. This program will receive uploads from its client-side -# couterpart, tupkg. Once a package is received and verified, it -# is placed in a specified temporary incoming directory where -# a separate script will handle migrating it to the AUR. For -# more information, see the ../README.txt file. -# -# Python Indentation: -# ------------------- -# For a vim: line to be effective, it must be at the end of the -# file. See the end of the file for more information. - -import sys -import socket -import threading -import select -import struct -import cgi -import urllib -import MySQLdb -import MySQLdb.connections -import ConfigParser -import getopt -import os.path -import os -import time -from hashlib import md5 - -CONFIGFILE = '/etc/tupkgs.conf' - -config = ConfigParser.ConfigParser() - -class ClientFile: - def __init__(self, filename, actual_size, actual_md5): - self.pathname = os.path.join(confdict['incomingdir'], filename) - self.filename = filename - self.fd = open(self.pathname, "a+b") - self.actual_size = actual_size - self.actual_md5 = actual_md5 - self.getSize() - self.orig_size = self.size - - def getSize(self): - cur = self.fd.tell() - self.fd.seek(0,2) - self.size = self.fd.tell() - self.fd.seek(cur) - - def makeMd5(self): - m = md5(); - cur = self.fd.tell() - self.getSize() - self.fd.seek(0) - while self.fd.tell() != self.size: - m.update(self.fd.read(1024)) - self.fd.seek(cur) - self.md5 = m.hexdigest() - - def finishDownload(self): - self.fd.close() - newpathname = os.path.join(confdict['cachedir'], self.filename) - os.rename(self.pathname, newpathname) - self.pathname = newpathname - self.fd = open(self.pathname, "a+b") - - def delete(self): - self.fd.close() - os.remove(self.pathname) - -class ClientSocket(threading.Thread): - def __init__(self, sock, **other): - threading.Thread.__init__(self, *other) - self.socket = sock - self.running = 1 - self.files = [] - - def close(self): - self.running = 0 - - def reliableRead(self, size): - totalread = "" - while len(totalread) < size: - read = self.socket.recv(size-len(totalread)) - if len(read) == 0: - raise RuntimeError, "socket connection broken" - totalread += read - return totalread - - def sendMsg(self, msg): - if type(msg) == dict: - msg = urllib.urlencode(msg,1) - length = struct.pack("H", socket.htons(len(msg))) - self.socket.sendall(length) - self.socket.sendall(msg) - - def readMsg(self, format=0): - initsize = self.reliableRead(2) - (length,) = struct.unpack("H", initsize) - length = socket.ntohs(length) - data = self.reliableRead(length) - if format == 1: - qs = cgi.parse_qs(data) - return qs - else: - return data - - def auth(self): - authdata = self.readMsg(1) - - if (authdata.has_key('username')): - print "Trying connection for user %s" % authdata['username'] - - if (not authdata.has_key('username')) or (not authdata.has_key('password')): - self.sendMsg("result=FAIL") - return 0 - - print "Connecting to MySQL database" - dbconn = MySQLdb.connect(host=config.get('mysql', 'host'), - user=config.get('mysql', 'username'), - passwd=config.get('mysql', 'password'), - db=config.get('mysql', 'db')) - - q = dbconn.cursor() - m = md5(); - m.update(authdata['password'][0]) - encpw = m.hexdigest() - try: - q.execute("SELECT ID, Suspended, AccountTypeID FROM Users WHERE Username = '"+ - MySQLdb.escape_string(authdata['username'][0])+ - "' AND Passwd = '"+ - MySQLdb.escape_string(encpw)+ - "'") - dbconn.close() - except : - self.sendMsg("result=SQLERR") - return 0 - if q.rowcount == 0: - self.sendMsg("result=FAIL") - return 0 - row = q.fetchone() - if row[1] != 0: - self.sendMsg("result=FAIL") - return 0 - if row[2] not in (2, 3): - self.sendMsg("result=FAIL") - return 0 - self.sendMsg("result=PASS") - return 1 - - def readFileMeta(self): - files = self.readMsg(1) - print files - # Actually do file checking, et al - for i in range(int(files['numpkgs'][0])): - self.files.append(ClientFile(files['name'+str(i)][0], int(files['size'+str(i)][0]), files['md5sum'+str(i)][0])) - new_files = files.copy() - for i in files: - if i[:4] == 'size': - clientfile = self.files[int(i[4:])] - new_files[i] = str(clientfile.orig_size) - if i[:6] == 'md5sum': - del new_files[i] - self.sendMsg(new_files) - - def readFiles(self): - for i in self.files: - count = i.orig_size - while count != i.actual_size: - if count + 1024 > i.actual_size: - i.fd.write(self.reliableRead(i.actual_size - count)) - count += i.actual_size - count - else: - i.fd.write(self.reliableRead(1024)) - count += 1024 - i.fd.flush() - reply = {'numpkgs': len(self.files)} - for i, v in enumerate(self.files): - v.makeMd5() - if v.actual_md5 == v.md5: - reply['md5sum'+str(i)] = "PASS" - v.finishDownload() - else: - reply['md5sum'+str(i)] = "FAIL" - v.delete() - self.sendMsg(reply) - print self.readMsg() - - def run(self): - try: - if not self.auth(): - print "Error authenticating." - self.close() - return - self.readFileMeta() - self.readFiles() - except RuntimeError, err: - if err.__str__() == "socket connection broken": - print "Client disconnected, cleaning up" - self.close() - return - -class ServerSocket(threading.Thread): - def __init__(self, port, maxqueue, **other): - threading.Thread.__init__(self, *other) - self.running = 1 - self.socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM) - self.socket.bind(('', port)) - self.socket.listen(maxqueue) - self.clients = [] - - def _clean(self, client): - if not client.isAlive(): - return 0 - return 1 - - def close(self): - self.socket.close() - self.running = 0 - - def run(self): - while self.running: - sread, swrite, serror = select.select([self.socket],[self.socket],[self.socket],1) - if sread: - (clientsocket, address) = self.socket.accept() - print time.asctime(time.gmtime()) - print "New connection from " + str(address) - ct = ClientSocket(clientsocket) - ct.start() - self.clients.append(ct) - - self.clients = filter(self._clean, self.clients) - self.socket.close() - [x.close() for x in self.clients] - [x.join() for x in self.clients] - -def usage(name): - print "usage: " + name + " [options]" - print "options:" - print " -c, --config Specify an alternate config file (default " + CONFIGFILE + ")" - -def getDefaultConfig(): - confdict = {} - confdict['port'] = 1034 - confdict['cachedir'] = '/var/cache/tupkgs/' - confdict['incomingdir'] = '/var/cache/tupkgs/incomplete/' - confdict['maxqueue'] = 5 - - return confdict - - -confdict = getDefaultConfig() - -def main(argv=None): - if argv is None: - argv = sys.argv - - try: - optlist, args = getopt.getopt(argv[1:], "c:", ["config="]) - except getopt.GetoptError: - usage(argv[0]) - return 1 - - conffile = CONFIGFILE - - for i, k in optlist: - if i in ('-c', '--config'): - conffile = k - - if not os.path.isfile(conffile): - print "Error: cannot access config file ("+conffile+")" - usage(argv[0]) - return 1 - - config.read(conffile) - - running = 1 - - print "Parsing config file" - if config.has_section('tupkgs'): - if config.has_option('tupkgs', 'port'): - confdict['port'] = config.getint('tupkgs', 'port') - if config.has_option('tupkgs', 'maxqueue'): - confdict['maxqueue'] = config.getint('tupkgs', 'maxqueue') - if config.has_option('tupkgs', 'cachedir'): - confdict['cachedir'] = config.get('tupkgs', 'cachedir') - if config.has_option('tupkgs', 'incomingdir'): - confdict['incomingdir'] = config.get('tupkgs', 'incomingdir') - - print "Verifying "+confdict['cachedir']+" and "+confdict['incomingdir']+" exist" - if not os.path.isdir(confdict['cachedir']): - print "Creating "+confdict['cachedir'] - os.mkdir(confdict['cachedir'], 0755) - if not os.path.isdir(confdict['incomingdir']): - print "Creating "+confdict['incomingdir'] - os.mkdir(confdict['incomingdir'], 0755) - - print "Starting ServerSocket" - servsock = ServerSocket(confdict['port'], confdict['maxqueue']) - servsock.start() - - try: - while running: - # Maybe do stuff here? - time.sleep(10) - except KeyboardInterrupt: - running = 0 - - print "Waiting for threads to die" - - servsock.close() - - servsock.join() - - - return 0 - -if __name__ == "__main__": - sys.exit(main()) - -# Python Indentation: -# ------------------- -# Use tabs not spaces. If you use vim, the following comment will -# configure it to use tabs. -# -# vim:noet:ts=2 sw=2 ft=python diff --git a/tupkg/server/tupkgs.conf b/tupkg/server/tupkgs.conf deleted file mode 100644 index dcbc679..0000000 --- a/tupkg/server/tupkgs.conf +++ /dev/null @@ -1,10 +0,0 @@ -[tupkgs] -port = 1034 -cachedir = /var/cache/tupkgs -incomingdir = /var/cache/tupkgs/incomplete - -[mysql] -username = aur -password = aur -host = localhost -db = AUR diff --git a/tupkg/update/tupkgupdate b/tupkg/update/tupkgupdate deleted file mode 100755 index 63314d4..0000000 --- a/tupkg/update/tupkgupdate +++ /dev/null @@ -1,622 +0,0 @@ -#!/usr/bin/python -O - -import re -import os -import sys -import pacman -import getopt -import MySQLdb -import MySQLdb.connections -import ConfigParser -from subprocess import Popen, PIPE - -########################################################### -# Deal with configuration -########################################################### - -conffile = '/etc/tupkgs.conf' - -config = ConfigParser.ConfigParser() - -############################################################ - -# Define some classes we need -class Version: - def __init__(self): - self.version = None - self.file = None - -class Package: - def __init__(self): - self.name = None - self.category = None - self.old = None - self.new = None - self.desc = None - self.url = None - self.depends = None - self.sources = None - -class PackageDatabase: - def __init__(self, host, user, password, dbname): - self.host = host - self.user = user - self.password = password - self.dbname = dbname - self.connection = MySQLdb.connect(host=host, user=user, passwd=password, db=dbname) - - def cursor(self): - try: - self.connection.ping() - except MySQLdb.OperationalError: - self.connection = MySQLdb.connect(host=self.host, user=self.user, passwd=self.password, db=self.dbname) - return self.connection.cursor() - - def lookup(self, packagename): - warning("DB: Looking up package: " + packagename) - q = self.cursor() - q.execute("SELECT ID FROM Packages WHERE Name = '" + - MySQLdb.escape_string(packagename) + "'") - if (q.rowcount != 0): - row = q.fetchone() - return row[0] - return None - - def getCategoryID(self, package): - category_id = self.lookupCategory(package.category) - if (category_id == None): - category_id = 1 - warning("DB: Got category ID '" + str(category_id) + "' for package '" + package.name + "'") - return category_id - - def insert(self, package, locationId): - warning("DB: Inserting package: " + package.name) - global repo_dir - q = self.cursor() - q.execute("INSERT INTO Packages " + - "(Name, CategoryID, Version, FSPath, LocationID, SubmittedTS, Description, URL) VALUES ('" + - MySQLdb.escape_string(package.name) + "', " + - str(self.getCategoryID(package)) + ", '" + - MySQLdb.escape_string(package.new.version) + "', '" + - MySQLdb.escape_string( - os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " + - str(locationId) + ", " + - "UNIX_TIMESTAMP(), '" + - MySQLdb.escape_string(str(package.desc)) + "', '" + - MySQLdb.escape_string(str(package.url)) + "')") - id = self.lookup(package.name) - self.insertNewInfo(package, id, locationId) - - def update(self, id, package, locationId): - warning("DB: Updating package: " + package.name + " with id " + str(id)) - global repo_dir - q = self.cursor() - if (self.isdummy(package.name)): - q.execute("UPDATE Packages SET " + - "Version = '" + MySQLdb.escape_string(package.new.version) + "', " + - "CategoryID = " + str(self.getCategoryID(package)) + ", " + - "FSPath = '" + MySQLdb.escape_string( - os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " + - "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " + - "DummyPkg = 0, " + - "SubmittedTS = UNIX_TIMESTAMP(), " + - "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " + - "WHERE ID = " + str(id)) - else: - q.execute("UPDATE Packages SET " + - "Version = '" + MySQLdb.escape_string(package.new.version) + "', " + - "CategoryID = " + str(self.getCategoryID(package)) + ", " + - "FSPath = '" + MySQLdb.escape_string( - os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " + - "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " + - "ModifiedTS = UNIX_TIMESTAMP(), " + - "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " + - "WHERE ID = " + str(id)) - self.insertNewInfo(package, id, locationId) - - # Check to see if this is a move of a package from unsupported - # to community, because we have to reset maintainer and location. - - q = self.cursor() - q.execute("SELECT LocationID FROM Packages WHERE ID = " + str(id)) - if (q.rowcount != 0): - row = q.fetchone() - if (row[0] != 3): - q = self.cursor() - q.execute("UPDATE Packages SET LocationID = 3, MaintainerUID = null WHERE ID = " + str(id)) - - def remove(self, id, locationId): - warning("DB: Removing package with id: " + str(id)) - q = self.cursor() - q.execute("DELETE FROM Packages WHERE " + - "LocationID = " + str(locationId) + " AND ID = " + str(id)) - - def clearOldInfo(self, id): - warning("DB: Clearing old info for package with id : " + str(id)) - q = self.cursor() - q.execute("DELETE FROM PackageContents WHERE PackageID = " + str(id)) - q.execute("DELETE FROM PackageDepends WHERE PackageID = " + str(id)) - q.execute("DELETE FROM PackageSources WHERE PackageID = " + str(id)) - - def lookupOrDummy(self, packagename): - retval = self.lookup(packagename) - if (retval != None): - return retval - return self.createDummy(packagename) - - def lookupCategory(self, categoryname): - warning("DB: Looking up category: " + categoryname) - q = self.cursor() - q.execute("SELECT ID from PackageCategories WHERE Category = '" + MySQLdb.escape_string(categoryname) + "'") - if (q.rowcount != 0): - row = q.fetchone() - return row[0] - return None - - def createDummy(self, packagename): - warning("DB: Creating dummy package for: " + packagename) - q = self.cursor() - q.execute("INSERT INTO Packages " + - "(Name, Description, LocationID, DummyPkg) " + - "VALUES ('" + - MySQLdb.escape_string(packagename) + "', '" + - MySQLdb.escape_string("A dummy package") + "', 1, 1)") - return self.lookup(packagename) - - def insertNewInfo(self, package, id, locationId): - q = self.cursor() - - # First delete the old. - self.clearOldInfo(id) - - warning("DB: Inserting new package info for " + package.name + - " with id " + str(id)) - - # PackageSources - for source in package.sources: - q.execute("INSERT INTO PackageSources (PackageID, Source) " + - "VALUES (" + str(id) + ", '" + MySQLdb.escape_string(source) + "')") - - # PackageDepends - for dep in package.depends: - depid = self.lookupOrDummy(dep) - q.execute("INSERT INTO PackageDepends (PackageID, DepPkgID) " + - "VALUES (" + str(id) + ", " + str(depid) + ")") - - def isdummy(self, packagename): - warning("DB: Looking up package: " + packagename) - q = self.cursor() - q.execute("SELECT * FROM Packages WHERE Name = '" + - MySQLdb.escape_string(packagename) + "' AND DummyPkg = 1") - if (q.rowcount != 0): - return True - return False - -############################################################ -# Functions for walking the file trees -############################################################ - -def filesForRegexp(topdir, regexp): - retval = [] - def matchfile(regexp, dirpath, namelist): - for name in namelist: - if (regexp.match(name)): - retval.append(os.path.join(dirpath, name)) - os.path.walk(topdir, matchfile, regexp) - return retval - -def packagesInTree(topdir): - return filesForRegexp(topdir, re.compile("^.*\.pkg\.tar\.gz$")) - -def pkgbuildsInTree(topdir): - return filesForRegexp(topdir, re.compile("^PKGBUILD$")) - -############################################################ -# Function for testing if two files are identical -############################################################ - -def areFilesIdentical(file_a, file_b): - command = "cmp '" + file_a + "' '" + file_b + "' >/dev/null" - retval = os.system(command) - if (retval == 0): - return True - return False - -############################################################ -# Function for fetching info from PKGBUILDs and packages -############################################################ - -def infoFromPackageFile(filename): - pkg = os.path.basename(filename) - m = re.compile("(?P.*)-(?P.*)-(?P.*).pkg.tar.gz").search(pkg) - if not m: - raise Exception("Non-standard filename") - else: - return m.group('pkgname'), m.group('pkgver') + "-" + m.group('pkgrel') - -def infoFromPkgbuildFile(filename): - # first grab the category based on the file path - pkgdirectory = os.path.dirname(filename) - catdirectory = os.path.dirname(pkgdirectory) - m = re.match(r".*/([^/]+)$", catdirectory) - if (m): - category = m.group(1) - else: - category = "none" - - # open and source the file - pf = Popen("/bin/bash", - shell=True, bufsize=0, stdin=PIPE, stdout=PIPE, close_fds=True) - - print >>pf.stdin, ". " + filename - #print "PKGBUILD: " + filename - - # get pkgname - print >>pf.stdin, 'echo $pkgname' - pkgname = pf.stdout.readline().strip() - - #print "PKGBUILD: pkgname: " + pkgname - - # get pkgver - print >>pf.stdin, 'echo $pkgver' - pkgver = pf.stdout.readline().strip() - #print "PKGBUILD: pkgver: " + pkgver - - # get pkgrel - print >>pf.stdin, 'echo $pkgrel' - pkgrel = pf.stdout.readline().strip() - #print "PKGBUILD: pkgrel: " + pkgrel - - # get url - print >>pf.stdin, 'echo $url' - url = pf.stdout.readline().strip() - #print "PKGBUILD: url: " + url - - # get desc - print >>pf.stdin, 'echo $pkgdesc' - pkgdesc = pf.stdout.readline().strip() - #print "PKGBUILD: pkgdesc: " + pkgdesc - - # get source array - print >>pf.stdin, 'echo ${source[*]}' - source = (pf.stdout.readline().strip()).split(" ") - - # get depends array - print >>pf.stdin, 'echo ${depends[*]}' - depends = (pf.stdout.readline().strip()).split(" ") - - # clean up - pf.stdin.close() - pf.stdout.close() - - return pkgname, pkgver + "-" + pkgrel, pkgdesc, url, depends, source, category - -def infoFromPkgbuildFileWorse(filename): - # load the file with pacman library - pkg = pacman.load(filename) - return (pkg.name, pkg.version + "-" + pkg.release, pkg.desc, - pkg.url, pkg.depends, pkg.source) - -############################################################ -# Functions for doing the final steps of execution -############################################################ - -def execute(command): - global switches - print(command) - if not (switches.get("-n") == True): - return os.system(command) - return 0 - -def copyFileToRepo(filename, repodir): - destfile = os.path.join(repodir, os.path.basename(filename)) - command = "cp --preserve=timestamps '" + filename + "' '" + destfile + "'" - return execute(command) - -def deleteFile(filename): - command = "rm '" + filename + "'" - return execute(command) - -def runRepoAdd(repo, package): - global havefakeroot - targetDB = os.path.join(repo, "community.db.tar.gz") - destfile = os.path.join(repo, os.path.basename(package.new.file)) - if havefakeroot: - command = "fakeroot repo-add '" + targetDB + "' '" + destfile + "'" - else: - command = "repo-add '" + targetDB + "' '" + destfile + "'" - return execute(command) - -def runRepoRemove(repo, pkgname): - global havefakeroot - targetDB = os.path.join(repo, "community.db.tar.gz") - if havefakeroot: - command = "fakeroot repo-remove '" + targetDB + "' '"+ pkgname + "'" - else: - command = "repo-remove '" + targetDB + "' '" + pkgname +"'" - return execute(command) - -############################################################ -# Functions for error handling -############################################################ - -def warning(string): - print >>sys.stderr, string - -had_error = 0 -def error(string): - global had_error - warning(string) - had_error = 1 - -def usage(name): - print "Usage: %s [options] " % name - print "Options:" - print " -c, --config Specify a path to the config file." - print " -n Don't actually perform any action on the repo." - print " --delete Delete duplicate and temporary pkgs." - print " --paranoid Warn of duplicate pkgs that aren't identical." - sys.exit(1) - -############################################################ -# MAIN -############################################################ - -# ARGUMENTS -# See usage() for specifying arguments. - -try: - optlist, args = getopt.getopt(sys.argv[1:], 'c:n', - ['config=', 'delete', 'paranoid']) -except getopt.GetoptError: - usage(sys.argv[0]) - -switches = {} -for opt in optlist: - switches[opt[0]] = 1 - -# Check for required arguments. -if (len(args) < 3): - usage(sys.argv[0]) - -for opt, value in optlist: - if opt in ('-c', '--config'): - conffile = value - -try: - repo_dir, pkgbuild_dir, build_dir = args -except ValueError: - usage(sys.argv[0]) - -if not os.path.isfile(conffile): - print "Error: cannot access config file (%s)" % conffile - sys.exit(1) - -config.read(conffile) -config_use_db = config.has_section('mysql') - -# Make sure we can use fakeroot, warn if not -havefakeroot = False -if os.access('/usr/bin/fakeroot', os.X_OK): - havefakeroot = True -else: - warning("Not using fakeroot for repo db generation") - -# Open the database if we need it so we find out now if we can't! -if config_use_db: - try: - db = PackageDatabase(config.get('mysql', 'host'), - config.get('mysql', 'username'), - config.get('mysql', 'password'), - config.get('mysql', 'db')) - except: - print "Error: Could not connect to the database %s at %s." % ( - config.get('mysql', 'db'), config.get('mysql', 'host')) - sys.exit(1) - -# Set up the lists and tables -packages = dict() -copy = list() -delete = list() - -dbremove = list() -dbmodify = list() - -# PASS 1: PARSING/LOCATING -# -# A) Go through the PKGBUILD tree -# For each PKGBUILD, create a Package with new Version containing -# parsed version and and None for file - -a_files = pkgbuildsInTree(pkgbuild_dir) -for a_file in a_files: - pkgname, ver, desc, url, depends, sources, category = infoFromPkgbuildFile(a_file) - - # Error (and skip) if we encounter any invalid PKGBUILD files - if (pkgname == None or ver == None): - error("Pkgbuild '" + a_file + "' is invalid!") - continue - - # Error (and skip) if we encounter any duplicate package names - # in the PKGBUILDs - if (packages.get(pkgname)): - error("Pkgbuild '" + a_file + "' is a duplicate!") - continue - - version = Version() - version.version = ver - version.file = None - - package = Package() - package.name = pkgname - package.category = category - package.desc = desc - package.url = url - package.depends = depends - package.sources = sources - package.new = version - -# print "Package: desc " + desc - - packages[pkgname] = package - -# B) Go through the old repo dir -# For each package file we encounter, create a Package with old -# Version containing parsed version and filepath - -b_files = packagesInTree(repo_dir) -for b_file in b_files: - pkgname, ver = infoFromPackageFile(b_file) - - version = Version() - version.version = ver - version.file = b_file - - package = packages.get(pkgname) - if (package == None): - package = Package() - package.name = pkgname - packages[pkgname] = package - package.old = version - -# C) Go through the build tree -# For each package file we encounter: -# 1 - look up the package name; if it fails, ignore the file (no error) -# 2 - if package.new == None, ignore the package (no error) -# 3 - if package.new.version doesn't match, then skip (no error) -# 4 - if package.new.file == None, point it to this file -# otherwise, log an error (and skip) - -c_files = packagesInTree(build_dir) -for c_file in c_files: - pkgname, ver = infoFromPackageFile(c_file) - - # 1 - package = packages.get(pkgname) - if (package == None): - continue - - # 2 - if (package.new == None): - continue - - # 3 - if (package.new.version != ver): - continue - - # 4 - if (package.new.file == None): - package.new.file = c_file - continue - else: - error("Duplicate new file '" + c_file + "'") - continue - -# PASS 2: CHECKING -# -# Go through the package collection -# 1 - if package has no new, place its old file on the "delete" list (and package on "dbremove") -# 2 - if package has a new but no new.file, and old file doesn't -# have the same version, then error (because gensync won't rebuild) -# 3 - if package has no old, add new file to "copy" list into repo dir (and package on "dbmodify") -# 4 - if new == old and paranoid is set, compare the files and error if not the same; -# otherwise just skip (no update) -# 5 - if we got here, it's a legit nontrivial new version which we allow -# add entry to "delete" list for old file and "copy" list for -# new file into repo dir (and package to "dbmodify") - -for package in packages.values(): - # 1 - if (package.new == None): - delete.append(package.old.file) - dbremove.append(package) - continue - - # 2 - if (package.new.file == None): - if (package.old == None or package.old.file == None or - package.old.version != package.new.version): - errstr = "No new package supplied for " + package.name + " " + package.new.version + "!" - error(errstr) - continue - - # 3 - if (package.old == None): - copy.append(package.new.file) - dbmodify.append(package) - continue - - # 4 - if (package.old.version == package.new.version): - if (switches.get("--paranoid") == True and package.new.file != None): - if not (areFilesIdentical(package.old.file, package.new.file)): - warning("New package file with identical version '" + - package.new.file + "' is different than the old one:") - if (switches.get("--delete") == True): - warning(" Deleting the new file.") - delete.append(package.new.file) - else: - warning(" Ignoring the new file.") - continue - - # 5 - delete.append(package.old.file) - copy.append(package.new.file) - dbmodify.append(package) - continue - -## IF WE HAVE HAD ANY ERRORS AT THIS POINT, ABORT! ## -if (had_error == 1): - error("Aborting due to errors.") - sys.exit(-1) - -# PASS 3: EXECUTION -# - -if config_use_db: - # First, do all the database updates if asked for - for package in dbremove: - id = db.lookup(package.name) - # Note: this could remove a package from unsupported; probably want to restrict to locationId and/or non-dummy - if (id != None): - db.clearOldInfo(id) - db.remove(id, 3) - - for package in dbmodify: - warning("DB: Package in dbmodify: " + package.name) - id = db.lookup(package.name) - if (id == None): - db.insert(package, 3) - else: - db.update(id, package, 3) - -# Copy -for file in copy: - retval = copyFileToRepo(file, repo_dir) - if (retval != 0): - error("Could not copy file to repo: '" + file + "'") - sys.exit(-1) - -# Delete (second, for safety's sake) -for file in delete: - deleteFile(file) - -# Now that we've copied new files and deleted, we should delete the source -# files, if we're supposed to -if (switches.get("--delete") == True): - for file in copy: - deleteFile(file) - -# Run updatesync where it is needed -for package in dbremove: - retval = runRepoRemove(repo_dir, package.name) - if (retval != 0): - error("repo-remove returned an error!") - sys.exit(-1) -for package in dbmodify: - retval = runRepoAdd(repo_dir, package) - if (retval != 0): - error("repo-add returned an error!") - sys.exit(-1) - -# vim: ft=python ts=2 sw=2 et diff --git a/tupkg/update/tupkgupdate-lite b/tupkg/update/tupkgupdate-lite deleted file mode 100755 index 51e4091..0000000 --- a/tupkg/update/tupkgupdate-lite +++ /dev/null @@ -1,513 +0,0 @@ -#!/usr/bin/python -O - -import re -import os -import sys -import pacman -import getopt -import glob -import MySQLdb -import MySQLdb.connections -import ConfigParser - -########################################################### -# Deal with configuration -########################################################### - -conffile = '/etc/tupkgs.conf' - -if not os.path.isfile(conffile): - print "Error: cannot access config file ("+conffile+")" - usage(argv[0]) - sys.exit(1) - -config = ConfigParser.ConfigParser() -config.read(conffile) - -############################################################ - -# Define some classes we need -class Version: - def __init__(self): - self.version = None - self.file = None - -class Package: - def __init__(self): - self.name = None - self.category = None - self.old = None - self.new = None - self.desc = None - self.url = None - self.depends = None - self.sources = None - -class PackageDatabase: - def __init__(self, host, user, password, dbname): - self.host = host - self.user = user - self.password = password - self.dbname = dbname - self.connection = MySQLdb.connect(host=host, user=user, passwd=password, db=dbname) - def cursor(self): - return self.connection.cursor() - def lookup(self, packagename): - warning("DB: Looking up package: " + packagename) - q = self.cursor() - q.execute("SELECT ID FROM Packages WHERE Name = '" + - MySQLdb.escape_string(packagename) + "'") - if (q.rowcount != 0): - row = q.fetchone() - return row[0] - return None - def getCategoryID(self, package): - category_id = self.lookupCategory(package.category) - if (category_id == None): - category_id = 1 - warning("DB: Got category ID '" + str(category_id) + "' for package '" + package.name + "'") - return category_id - def insert(self, package, locationId): - warning("DB: Inserting package: " + package.name) - global repo_dir - q = self.cursor() - q.execute("INSERT INTO Packages " + - "(Name, CategoryID, Version, FSPath, LocationID, SubmittedTS, Description, URL) VALUES ('" + - MySQLdb.escape_string(package.name) + "', " + - str(self.getCategoryID(package)) + ", '" + - MySQLdb.escape_string(package.new.version) + "', '" + - MySQLdb.escape_string( - os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " + - str(locationId) + ", " + - "UNIX_TIMESTAMP(), '" + - MySQLdb.escape_string(str(package.desc)) + "', '" + - MySQLdb.escape_string(str(package.url)) + "')") - id = self.lookup(package.name) - self.insertNewInfo(package, id, locationId) - def update(self, id, package, locationId): - warning("DB: Updating package: " + package.name + " with id " + str(id)) - global repo_dir - q = self.cursor() - if (self.isdummy(package.name)): - q.execute("UPDATE Packages SET " + - "Version = '" + MySQLdb.escape_string(package.new.version) + "', " + - "CategoryID = " + str(self.getCategoryID(package)) + ", " + - "FSPath = '" + MySQLdb.escape_string( - os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " + - "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " + - "DummyPkg = 0, " + - "SubmittedTS = UNIX_TIMESTAMP(), " + - "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " + - "WHERE ID = " + str(id)) - else: - q.execute("UPDATE Packages SET " + - "Version = '" + MySQLdb.escape_string(package.new.version) + "', " + - "CategoryID = " + str(self.getCategoryID(package)) + ", " + - "FSPath = '" + MySQLdb.escape_string( - os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " + - "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " + - "ModifiedTS = UNIX_TIMESTAMP(), " + - "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " + - "WHERE ID = " + str(id)) - self.insertNewInfo(package, id, locationId) - # we must lastly check to see if this is a move of a package from - # unsupported to community, because we'd have to reset maintainer and location - q = self.cursor() - q.execute("SELECT LocationID FROM Packages WHERE ID = " + str(id)) - if (q.rowcount != 0): - row = q.fetchone() - if (row[0] != 3): - q = self.cursor() - q.execute("UPDATE Packages SET LocationID = 3, MaintainerUID = null WHERE ID = " + str(id)) - def remove(self, id, locationId): - warning("DB: Removing package with id: " + str(id)) - q = self.cursor() - q.execute("DELETE FROM Packages WHERE " + - "LocationID = " + str(locationId) + " AND ID = " + str(id)) - def clearOldInfo(self, id): - warning("DB: Clearing old info for package with id : " + str(id)) - q = self.cursor() - q.execute("DELETE FROM PackageContents WHERE PackageID = " + str(id)) - q.execute("DELETE FROM PackageDepends WHERE PackageID = " + str(id)) - q.execute("DELETE FROM PackageSources WHERE PackageID = " + str(id)) - def lookupOrDummy(self, packagename): - retval = self.lookup(packagename) - if (retval != None): - return retval - return self.createDummy(packagename) - def lookupCategory(self, categoryname): - warning("DB: Looking up category: " + categoryname) - q = self.cursor() - q.execute("SELECT ID from PackageCategories WHERE Category = '" + MySQLdb.escape_string(categoryname) + "'") - if (q.rowcount != 0): - row = q.fetchone() - return row[0] - return None - def createDummy(self, packagename): - warning("DB: Creating dummy package for: " + packagename) - q = self.cursor() - q.execute("INSERT INTO Packages " + - "(Name, Description, LocationID, DummyPkg) " + - "VALUES ('" + - MySQLdb.escape_string(packagename) + "', '" + - MySQLdb.escape_string("A dummy package") + "', 1, 1)") - return self.lookup(packagename) - def insertNewInfo(self, package, id, locationId): - q = self.cursor() - - # first delete the old; this is never bad - self.clearOldInfo(id) - - warning("DB: Inserting new package info for " + package.name + - " with id " + str(id)) - - # PackageSources - for source in package.sources: - q.execute("INSERT INTO PackageSources (PackageID, Source) " + - "VALUES (" + str(id) + ", '" + source + "')") - # PackageDepends - for dep in package.depends: - depid = self.lookupOrDummy(dep) - q.execute("INSERT INTO PackageDepends (PackageID, DepPkgID) " + - "VALUES (" + str(id) + ", " + str(depid) + ")") - def isdummy(self, packagename): - warning("DB: Looking up package: " + packagename) - q = self.cursor() - q.execute("SELECT * FROM Packages WHERE Name = '" + - MySQLdb.escape_string(packagename) + "' AND DummyPkg = 1") - if (q.rowcount != 0): - return True - return False - -############################################################ -# Functions for walking the file trees -############################################################ - -def filesForRegexp(topdir, regexp): - retval = [] - def matchfile(regexp, dirpath, namelist): - for name in namelist: - if (regexp.match(name)): - retval.append(os.path.join(dirpath, name)) - os.path.walk(topdir, matchfile, regexp) - return retval - -def packagesInTree(topdir): - return filesForRegexp(topdir, re.compile("^.*\.pkg\.tar\.gz$")) - -def pkgbuildsInTree(topdir): - return filesForRegexp(topdir, re.compile("^PKGBUILD$")) - -############################################################ -# Function for testing if two files are identical -############################################################ - -def areFilesIdentical(file_a, file_b): - command = "cmp '" + file_a + "' '" + file_b + "' >/dev/null" - retval = os.system(command) - if (retval == 0): - return True - return False - -############################################################ -# Function for fetching info from PKGBUILDs and packages -############################################################ - -def infoFromPackageFile(filename): - pkg = pacman.load(filename) - return pkg.name, pkg.version + "-" + pkg.release - -def infoFromPkgbuildFile(filename): - # first grab the category based on the file path - pkgdirectory = os.path.dirname(filename) - catdirectory = os.path.dirname(pkgdirectory) - m = re.match(r".*/([^/]+)$", catdirectory) - if (m): - category = m.group(1) - else: - category = "none" - - # open and source the file - pf_stdin, pf_stdout = os.popen2("/bin/bash", 't', 0) - print >>pf_stdin, ". " + filename - #print "PKGBUILD: " + filename - - # get pkgname - print >>pf_stdin, 'echo $pkgname' - pkgname = pf_stdout.readline().strip() - #print "PKGBUILD: pkgname: " + pkgname - - # get pkgver - print >>pf_stdin, 'echo $pkgver' - pkgver = pf_stdout.readline().strip() - #print "PKGBUILD: pkgver: " + pkgver - - # get pkgrel - print >>pf_stdin, 'echo $pkgrel' - pkgrel = pf_stdout.readline().strip() - #print "PKGBUILD: pkgrel: " + pkgrel - - # get url - print >>pf_stdin, 'echo $url' - url = pf_stdout.readline().strip() - #print "PKGBUILD: url: " + url - - # get desc - print >>pf_stdin, 'echo $pkgdesc' - pkgdesc = pf_stdout.readline().strip() - #print "PKGBUILD: pkgdesc: " + pkgdesc - - # get source array - print >>pf_stdin, 'echo ${source[*]}' - source = (pf_stdout.readline().strip()).split(" ") - - # get depends array - print >>pf_stdin, 'echo ${depends[*]}' - depends = (pf_stdout.readline().strip()).split(" ") - - # clean up - pf_stdin.close() - pf_stdout.close() - - return pkgname, pkgver + "-" + pkgrel, pkgdesc, url, depends, source, category - -def infoFromPkgbuildFileWorse(filename): - # load the file with pacman library - pkg = pacman.load(filename) - return (pkg.name, pkg.version + "-" + pkg.release, pkg.desc, - pkg.url, pkg.depends, pkg.source) - -############################################################ -# Functions for doing the final steps of execution -############################################################ - -def execute(command): - global switches - print(command) - if not (switches.get("-n") == True): - return os.system(command) - return 0 - -def copyFileToRepo(filename, repodir): - destfile = os.path.join(repodir, os.path.basename(filename)) - command = "cp --preserve=timestamps '" + filename + "' '" + destfile + "'" - return execute(command) - -def deleteFile(filename): - command = "rm '" + filename + "'" - return execute(command) - -def runGensync(repo, pkgbuild): -#target = os.path.join(repo, os.path.basename(repo) + ".db.tar.gz") - target = os.path.join(repo, "community.db.tar.gz") - command = "gensync '" + pkgbuild + "' '" + target + "'" - return execute(command) - -def runUpdatesyncUpd(repo, pkgbuild): - targetDB = os.path.join(repo, "community.db.tar.gz") - command = "updatesync upd '" + targetDB + "' '" + pkgbuild + "' '" + repo +"'" - return execute(command) - -def runUpdatesyncDel(repo, pkgname): - targetDB = os.path.join(repo, "community.db.tar.gz") - command = "updatesync del '" + targetDB + "' '" + pkgname +"'" - return execute(command) - -############################################################ -# Functions for error handling -############################################################ - -def warning(string): - print >>sys.stderr, string - -had_error = 0 -def error(string): - global had_error - warning(string) - had_error = 1 - -############################################################ -# MAIN -############################################################ -# The purpose of this version of tupkgupdate is to avoid -# doing as much time and machine-intensive work as the full -# tupkgupdate does, by relying on the state of the mysql -# database to be correct. Since it usually is, this is a -# good means for effecting updates more quickly, and won't -# be a processor hog. -# -# Note that this version CANNOT HANDLE deleted packages. Those -# will have to be processed less frequently. The only way to -# know a package for sure is missing is to look through all -# the PKGBUILDs which is what we're trying to avoid. -# -# ARGUMENTS -# -# tupkgupdate [-n] [--delete] [--paranoid] - -# First call getopt -switch_list,args_proper = getopt.getopt(sys.argv[1:], 'n', - [ "delete", "paranoid" ]) -switches = {} -for switch in switch_list: - switches[switch[0]] = 1 - -# Then handle the remaining arguments -if (len(args_proper) < 3): - print >>sys.stderr, "syntax: tupkgupdate [-n] [--delete] [--paranoid] " - sys.exit(-1) - -repo_dir, pkgbuild_dir, build_dir = args_proper - -# Open the database so we find out now if we can't! -db = PackageDatabase(config.get('mysql', 'host'), - config.get('mysql', 'username'), - config.get('mysql', 'password'), - config.get('mysql', 'db')) - -# Set up the lists and tables -packages = dict() -copy = list() -delete = list() - -dbremove = list() -dbmodify = list() - -# PASS 1: PARSING/LOCATING/CHECKING -# -# Go through each package file in the incoming/build tree -c_files = packagesInTree(build_dir) -for c_file in c_files: - -# 1 - fetch package.name and package.new.{version,file} from package file -# a) error and skip if invalid package file - pkgname, ver = infoFromPackageFile(c_file) - if (pkgname == None or ver == None): - error("Package file '" + c_file + "' is invalid!") - continue - -# b) error and skip if this is a duplicate we've already seen - if (packages.get(pkgname)): - error("Pkgbuild '" + a_file + "' is a duplicate!") - continue - -# c) create the package structure - package = Package() - package.name = pkgname - - version = Version() - version.version = ver - version.file = c_file - - package.new = version - -# 2 - use the package name to find/parse the PKGBUILD - ver, desc, url, depends, sources, category = findPkgbuildAndGetInfo(pkgname) - -# a) if no PKGBUILD file, ignore the built file (log a warning, and skip) - if (ver == None): - # no way to log warnings at the moment - continue - -# b) check that PKGBUILD pkgver-pkgrel == package.new.version (or log error and skip) - if (ver != package.new.version): - error("For package '" + pkgname + "' the PKGBUILD ver '" + ver + "' doesn't match the binary package ver '" + package.new.version + "') - continue; - -# c) populate package.{desc,url,depends,sources,category} - package.desc = desc - package.url = url - package.depends = depends - package.sources = sources - package.category = category - -# 3 - fill in package.old.version from the mysql db ([community] only) and perform checking: - ver = db.getCommunityVersion(package.name) - -# a) if no record in mysql db, verify package not in repo (or log error and skip) - if (ver == None): - evil_packages = glob.glob(os.path.join(repodir, package.name + "-*.pkg.tar.gz")); - found_evil_package = 0; - for evil_package in evil_packages: - pkgname, ver = infoFromPackageFile(evil_package) - if (pkgname == package.name): - error("No record of package '" + package.name + "' in [community] yet it has a package in '" + evil_package + "'") - found_evil_package = 1; - continue; - if (found_evil_package == 1): - continue; - -# b) if record in mysql db, infer and verify proper package.old.file in repo (or log error and skip) - inferred_old_filepath = os.path.join(repodir, package.name + "-" + ver + ".pkg.tar.gz") - if (not os.path.exists(inferred_old_filepath)): - error("The old package file '" + inferred_old_filepath + "' should exist but doesn't! Aborting.") - continue - -# 4 - If new file exists in repo already, delete it (silently) and skip - new_filepath = os.path.join(repodir, os.path.basename(package.new.file)) - if (os.path.exists(new_filepath)): - delete.append(package.new.file) - continue - -# 5 - If we've gotten here, we are a legitimate update or new package, so: -# a) put the package in the package list - packages.append(package) - -# b) add new file to the "copy" list - copy.append(package.new.file) - -# c) add package to "dbmodify" list - dbmodify.append(package) - -# d) if package has an old, add old file to "delete" list - if (not package.old == None): - delete.append(package.old.file) - -## IF WE HAVE HAD ANY ERRORS AT THIS POINT, ABORT! ## -if (had_error == 1): - error("Aborting due to errors.") - sys.exit(-1) - -# FOR NOW, ALWAYS EXIT, for safety -warning("Would have succeeded in the operation.") -warning("DBMODIFY: " + ','.join(dbmodify)) -warning("COPY: " + ','.join(copy)) -warning("DELETE: " + ','.join(delete)) -sys.exit(-1) - -# PASS 3: EXECUTION -# - -# First, do all the database updates - -for package in dbmodify: - warning("DB: Package in dbmodify: " + package.name) - id = db.lookup(package.name) - if (id == None): - db.insert(package, 3) - else: - db.update(id, package, 3) - -# Copy -for file in copy: - retval = copyFileToRepo(file, repo_dir) - if (retval != 0): - error("Could not copy file to repo: '" + file + "'") - sys.exit(-1) -# Delete (second, for safety's sake) -for file in delete: - deleteFile(file) -# Now that we've copied new files and deleted, we should delete the source -# files, if we're supposed to -if (switches.get("--delete") == True): - for file in copy: - deleteFile(file) - -# Run updatesync where it is needed -for package in dbmodify: - retval = runUpdatesyncUpd(repo_dir, os.path.join(pkgbuild_dir,package.category,package.name,"PKGBUILD")) - if (retval != 0): - error("Updatesync upd returned an error!") - sys.exit(-1) - -# vim: ft=python ts=2 sw=2 noet diff --git a/tupkg/update/tupkgupdate64 b/tupkg/update/tupkgupdate64 deleted file mode 100755 index 80c19d9..0000000 --- a/tupkg/update/tupkgupdate64 +++ /dev/null @@ -1,579 +0,0 @@ -#!/usr/bin/python -O - -import re -import os -import sys -import pacman -import getopt -import MySQLdb -import MySQLdb.connections -import ConfigParser - -########################################################### -# Deal with configuration -########################################################### - -conffile = '/etc/tupkgs64.conf' - -if not os.path.isfile(conffile): - print "Error: cannot access config file ("+conffile+")" - usage(argv[0]) - sys.exit(1) - -config = ConfigParser.ConfigParser() -config.read(conffile) - -############################################################ - -# Define some classes we need -class Version: - def __init__(self): - self.version = None - self.file = None - -class Package: - def __init__(self): - self.name = None - self.category = None - self.old = None - self.new = None - self.desc = None - self.url = None - self.depends = None - self.sources = None - -class PackageDatabase: - def __init__(self, host, user, password, dbname): - self.host = host - self.user = user - self.password = password - self.dbname = dbname - self.connection = MySQLdb.connect(host=host, user=user, passwd=password, db=dbname) - def cursor(self): - try: - self.connection.ping() - except MySQLdb.OperationalError: - self.connection = MySQLdb.connect(host=self.host, user=self.user, passwd=self.password, db=self.dbname) - return self.connection.cursor() - def lookup(self, packagename): - warning("DB: Looking up package: " + packagename) - q = self.cursor() - q.execute("SELECT ID FROM Packages WHERE Name = '" + - MySQLdb.escape_string(packagename) + "'") - if (q.rowcount != 0): - row = q.fetchone() - return row[0] - return None - def getCategoryID(self, package): - category_id = self.lookupCategory(package.category) - if (category_id == None): - category_id = 1 - warning("DB: Got category ID '" + str(category_id) + "' for package '" + package.name + "'") - return category_id - def insert(self, package, locationId): - warning("DB: Inserting package: " + package.name) - global repo_dir - q = self.cursor() - q.execute("INSERT INTO Packages " + - "(Name, CategoryID, Version, FSPath, LocationID, SubmittedTS, Description, URL) VALUES ('" + - MySQLdb.escape_string(package.name) + "', " + - str(self.getCategoryID(package)) + ", '" + - MySQLdb.escape_string(package.new.version) + "', '" + - MySQLdb.escape_string( - os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " + - str(locationId) + ", " + - "UNIX_TIMESTAMP(), '" + - MySQLdb.escape_string(str(package.desc)) + "', '" + - MySQLdb.escape_string(str(package.url)) + "')") - id = self.lookup(package.name) - self.insertNewInfo(package, id, locationId) - def update(self, id, package, locationId): - warning("DB: Updating package: " + package.name + " with id " + str(id)) - global repo_dir - q = self.cursor() - if (self.isdummy(package.name)): - q.execute("UPDATE Packages SET " + - "Version = '" + MySQLdb.escape_string(package.new.version) + "', " + - "CategoryID = " + str(self.getCategoryID(package)) + ", " + - "FSPath = '" + MySQLdb.escape_string( - os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " + - "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " + - "DummyPkg = 0, " + - "SubmittedTS = UNIX_TIMESTAMP(), " + - "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " + - "WHERE ID = " + str(id)) - else: - q.execute("UPDATE Packages SET " + - "Version = '" + MySQLdb.escape_string(package.new.version) + "', " + - "CategoryID = " + str(self.getCategoryID(package)) + ", " + - "FSPath = '" + MySQLdb.escape_string( - os.path.join(repo_dir, os.path.basename(package.new.file))) + "', " + - "Description = '" + MySQLdb.escape_string(str(package.desc)) + "', " + - "ModifiedTS = UNIX_TIMESTAMP(), " + - "URL = '" + MySQLdb.escape_string(str(package.url)) + "' " + - "WHERE ID = " + str(id)) - self.insertNewInfo(package, id, locationId) - # we must lastly check to see if this is a move of a package from - # unsupported to community, because we'd have to reset maintainer and location - q = self.cursor() - q.execute("SELECT LocationID FROM Packages WHERE ID = " + str(id)) - if (q.rowcount != 0): - row = q.fetchone() - if (row[0] != 3): - q = self.cursor() - q.execute("UPDATE Packages SET LocationID = 3, MaintainerUID = null WHERE ID = " + str(id)) - def remove(self, id, locationId): - warning("DB: Removing package with id: " + str(id)) - q = self.cursor() - q.execute("DELETE FROM Packages WHERE " + - "LocationID = " + str(locationId) + " AND ID = " + str(id)) - def clearOldInfo(self, id): - warning("DB: Clearing old info for package with id : " + str(id)) - q = self.cursor() - q.execute("DELETE FROM PackageContents WHERE PackageID = " + str(id)) - q.execute("DELETE FROM PackageDepends WHERE PackageID = " + str(id)) - q.execute("DELETE FROM PackageSources WHERE PackageID = " + str(id)) - def lookupOrDummy(self, packagename): - retval = self.lookup(packagename) - if (retval != None): - return retval - return self.createDummy(packagename) - def lookupCategory(self, categoryname): - warning("DB: Looking up category: " + categoryname) - q = self.cursor() - q.execute("SELECT ID from PackageCategories WHERE Category = '" + MySQLdb.escape_string(categoryname) + "'") - if (q.rowcount != 0): - row = q.fetchone() - return row[0] - return None - def createDummy(self, packagename): - warning("DB: Creating dummy package for: " + packagename) - q = self.cursor() - q.execute("INSERT INTO Packages " + - "(Name, Description, LocationID, DummyPkg) " + - "VALUES ('" + - MySQLdb.escape_string(packagename) + "', '" + - MySQLdb.escape_string("A dummy package") + "', 1, 1)") - return self.lookup(packagename) - def insertNewInfo(self, package, id, locationId): - q = self.cursor() - - # first delete the old; this is never bad - self.clearOldInfo(id) - - warning("DB: Inserting new package info for " + package.name + - " with id " + str(id)) - - # PackageSources - for source in package.sources: - q.execute("INSERT INTO PackageSources (PackageID, Source) " + - "VALUES (" + str(id) + ", '" + MySQLdb.escape_string(source) + "')") - # PackageDepends - for dep in package.depends: - depid = self.lookupOrDummy(dep) - q.execute("INSERT INTO PackageDepends (PackageID, DepPkgID) " + - "VALUES (" + str(id) + ", " + str(depid) + ")") - def isdummy(self, packagename): - warning("DB: Looking up package: " + packagename) - q = self.cursor() - q.execute("SELECT * FROM Packages WHERE Name = '" + - MySQLdb.escape_string(packagename) + "' AND DummyPkg = 1") - if (q.rowcount != 0): - return True - return False - -############################################################ -# Functions for walking the file trees -############################################################ - -def filesForRegexp(topdir, regexp): - retval = [] - def matchfile(regexp, dirpath, namelist): - for name in namelist: - if (regexp.match(name)): - retval.append(os.path.join(dirpath, name)) - os.path.walk(topdir, matchfile, regexp) - return retval - -def packagesInTree(topdir): - return filesForRegexp(topdir, re.compile("^.*\.pkg\.tar\.gz$")) - -def pkgbuildsInTree(topdir): - return filesForRegexp(topdir, re.compile("^PKGBUILD$")) - -############################################################ -# Function for testing if two files are identical -############################################################ - -def areFilesIdentical(file_a, file_b): - command = "cmp '" + file_a + "' '" + file_b + "' >/dev/null" - retval = os.system(command) - if (retval == 0): - return True - return False - -############################################################ -# Function for fetching info from PKGBUILDs and packages -############################################################ - -def infoFromPackageFile(filename): - pkg = os.path.basename(filename) - m = re.compile("(?P.*)-(?P.*)-(?P.*).pkg.tar.gz").search(pkg) - if not m: - raise Exception("Non-standard filename") - else: - return m.group('pkgname'), m.group('pkgver') + "-" + m.group('pkgrel') - -def infoFromPkgbuildFile(filename): - # first grab the category based on the file path - pkgdirectory = os.path.dirname(filename) - catdirectory = os.path.dirname(pkgdirectory) - m = re.match(r".*/([^/]+)$", catdirectory) - if (m): - category = m.group(1) - else: - category = "none" - - # open and source the file - pf_stdin, pf_stdout = os.popen2("/bin/bash", 't', 0) - print >>pf_stdin, ". " + filename - #print "PKGBUILD: " + filename - - # get pkgname - print >>pf_stdin, 'echo $pkgname' - pkgname = pf_stdout.readline().strip() - #print "PKGBUILD: pkgname: " + pkgname - - # get pkgver - print >>pf_stdin, 'echo $pkgver' - pkgver = pf_stdout.readline().strip() - #print "PKGBUILD: pkgver: " + pkgver - - # get pkgrel - print >>pf_stdin, 'echo $pkgrel' - pkgrel = pf_stdout.readline().strip() - #print "PKGBUILD: pkgrel: " + pkgrel - - # get url - print >>pf_stdin, 'echo $url' - url = pf_stdout.readline().strip() - #print "PKGBUILD: url: " + url - - # get desc - print >>pf_stdin, 'echo $pkgdesc' - pkgdesc = pf_stdout.readline().strip() - #print "PKGBUILD: pkgdesc: " + pkgdesc - - # get source array - print >>pf_stdin, 'echo ${source[*]}' - source = (pf_stdout.readline().strip()).split(" ") - - # get depends array - print >>pf_stdin, 'echo ${depends[*]}' - depends = (pf_stdout.readline().strip()).split(" ") - - # clean up - pf_stdin.close() - pf_stdout.close() - - return pkgname, pkgver + "-" + pkgrel, pkgdesc, url, depends, source, category - -def infoFromPkgbuildFileWorse(filename): - # load the file with pacman library - pkg = pacman.load(filename) - return (pkg.name, pkg.version + "-" + pkg.release, pkg.desc, - pkg.url, pkg.depends, pkg.source) - -############################################################ -# Functions for doing the final steps of execution -############################################################ - -def execute(command): - global switches - print(command) - if not (switches.get("-n") == True): - return os.system(command) - return 0 - -def copyFileToRepo(filename, repodir): - destfile = os.path.join(repodir, os.path.basename(filename)) - command = "cp --preserve=timestamps '" + filename + "' '" + destfile + "'" - return execute(command) - -def deleteFile(filename): - command = "rm '" + filename + "'" - return execute(command) - -def runRepoAdd(repo, package): - global havefakeroot - targetDB = os.path.join(repo, "community.db.tar.gz") - destfile = os.path.join(repo, os.path.basename(package.new.file)) - if havefakeroot: - command = "fakeroot repo-add '" + targetDB + "' '" + destfile + "'" - else: - command = "repo-add '" + targetDB + "' '" + destfile + "'" - return execute(command) - -def runRepoRemove(repo, pkgname): - global havefakeroot - targetDB = os.path.join(repo, "community.db.tar.gz") - if havefakeroot: - command = "fakeroot repo-remove '" + targetDB + "' '"+ pkgname + "'" - else: - command = "repo-remove '" + targetDB + "' '" + pkgname +"'" - return execute(command) - -############################################################ -# Functions for error handling -############################################################ - -def warning(string): - print >>sys.stderr, string - -had_error = 0 -def error(string): - global had_error - warning(string) - had_error = 1 - -############################################################ -# MAIN -############################################################ - -# ARGUMENTS -# -# tupkgupdate [-n] [--delete] [--paranoid] - -# First call getopt -switch_list,args_proper = getopt.getopt(sys.argv[1:], 'n', - [ "delete", "paranoid" ]) -switches = {} -for switch in switch_list: - switches[switch[0]] = 1 - -# Then handle the remaining arguments -if (len(args_proper) < 3): - print >>sys.stderr, "syntax: tupkgupdate64 [-n] [--delete] [--paranoid] " - sys.exit(-1) - -# Make sure we can use fakeroot, warn if not -havefakeroot = False -if os.access('/usr/bin/fakeroot', os.X_OK): - havefakeroot = True -else: - warning("Not using fakeroot for repo db generation") - -repo_dir, pkgbuild_dir, build_dir = args_proper - -# Open the database so we find out now if we can't! -db = PackageDatabase(config.get('mysql', 'host'), - config.get('mysql', 'username'), - config.get('mysql', 'password'), - config.get('mysql', 'db')) - -# Set up the lists and tables -packages = dict() -copy = list() -delete = list() - -dbremove = list() -dbmodify = list() - -# PASS 1: PARSING/LOCATING -# -# A) Go through the PKGBUILD tree -# For each PKGBUILD, create a Package with new Version containing -# parsed version and and None for file - -a_files = pkgbuildsInTree(pkgbuild_dir) -for a_file in a_files: - pkgname, ver, desc, url, depends, sources, category = infoFromPkgbuildFile(a_file) - - # Error (and skip) if we encounter any invalid PKGBUILD files - if (pkgname == None or ver == None): - error("Pkgbuild '" + a_file + "' is invalid!") - continue - - # Error (and skip) if we encounter any duplicate package names - # in the PKGBUILDs - if (packages.get(pkgname)): - error("Pkgbuild '" + a_file + "' is a duplicate!") - continue - - version = Version() - version.version = ver - version.file = None - - package = Package() - package.name = pkgname - package.category = category - package.desc = desc - package.url = url - package.depends = depends - package.sources = sources - package.new = version - -# print "Package: desc " + desc - - packages[pkgname] = package - -# B) Go through the old repo dir -# For each package file we encounter, create a Package with old -# Version containing parsed version and filepath - -b_files = packagesInTree(repo_dir) -for b_file in b_files: - pkgname, ver = infoFromPackageFile(b_file) - - version = Version() - version.version = ver - version.file = b_file - - package = packages.get(pkgname) - if (package == None): - package = Package() - package.name = pkgname - packages[pkgname] = package - package.old = version - -# C) Go through the build tree -# For each package file we encounter: -# 1 - look up the package name; if it fails, ignore the file (no error) -# 2 - if package.new == None, ignore the package (no error) -# 3 - if package.new.version doesn't match, then skip (no error) -# 4 - if package.new.file == None, point it to this file -# otherwise, log an error (and skip) - -c_files = packagesInTree(build_dir) -for c_file in c_files: - pkgname, ver = infoFromPackageFile(c_file) - - # 1 - package = packages.get(pkgname) - if (package == None): - continue - - # 2 - if (package.new == None): - continue - - # 3 - if (package.new.version != ver): - continue - - # 4 - if (package.new.file == None): - package.new.file = c_file - continue - else: - error("Duplicate new file '" + c_file + "'") - continue - -# PASS 2: CHECKING -# -# Go through the package collection -# 1 - if package has no new, place its old file on the "delete" list (and package on "dbremove") -# 2 - if package has a new but no new.file, and old file doesn't -# have the same version, then error (because gensync won't rebuild) -# 3 - if package has no old, add new file to "copy" list into repo dir (and package on "dbmodify") -# 4 - if new == old and paranoid is set, compare the files and error if not the same; -# otherwise just skip (no update) -# 5 - if we got here, it's a legit nontrivial new version which we allow -# add entry to "delete" list for old file and "copy" list for -# new file into repo dir (and package to "dbmodify") - -for package in packages.values(): - # 1 - if (package.new == None): - delete.append(package.old.file) - dbremove.append(package) - continue - - # 2 - if (package.new.file == None): - if (package.old == None or package.old.file == None or - package.old.version != package.new.version): - errstr = "No new package supplied for " + package.name + " " + package.new.version + "!" - error(errstr) - continue - - # 3 - if (package.old == None): - copy.append(package.new.file) - dbmodify.append(package) - continue - - # 4 - if (package.old.version == package.new.version): - if (switches.get("--paranoid") == True and package.new.file != None): - if not (areFilesIdentical(package.old.file, package.new.file)): - warning("New package file with identical version '" + - package.new.file + "' is different than the old one:") - if (switches.get("--delete") == True): - warning(" Deleting the new file.") - delete.append(package.new.file) - else: - warning(" Ignoring the new file.") - continue - - # 5 - delete.append(package.old.file) - copy.append(package.new.file) - dbmodify.append(package) - continue - -## IF WE HAVE HAD ANY ERRORS AT THIS POINT, ABORT! ## -if (had_error == 1): - error("Aborting due to errors.") - sys.exit(-1) - -# PASS 3: EXECUTION -# - -# First, do all the database updates -# We won't do these for x86_64 - jason Oct 1/2006 -#for package in dbremove: -# id = db.lookup(package.name) -# # Note: this could remove a package from unsupported; probably want to restrict to locationId and/or non-dummy -# if (id != None): -# db.clearOldInfo(id) -# db.remove(id, 3) -# -#for package in dbmodify: -# warning("DB: Package in dbmodify: " + package.name) -# id = db.lookup(package.name) -# if (id == None): -# db.insert(package, 3) -# else: -# db.update(id, package, 3) - -# Copy -for file in copy: - retval = copyFileToRepo(file, repo_dir) - if (retval != 0): - error("Could not copy file to repo: '" + file + "'") - sys.exit(-1) - -# Delete (second, for safety's sake) -for file in delete: - deleteFile(file) - -# Now that we've copied new files and deleted, we should delete the source -# files, if we're supposed to -if (switches.get("--delete") == True): - for file in copy: - deleteFile(file) - -# Run updatesync where it is needed -for package in dbremove: - retval = runRepoRemove(repo_dir, package.name) - if (retval != 0): - error("repo-remove returned an error!") - sys.exit(-1) -for package in dbmodify: - retval = runRepoAdd(repo_dir, package) - if (retval != 0): - error("repo-add returned an error!") - sys.exit(-1) - -# vim: ft=python ts=2 sw=2 noet -- cgit v1.2.3-54-g00ecf